Rectangular type APS-10 to 15 Series

Transcription

1 Rectngulr type APS- to 15 Series From n ultr-thin design to n operting distnce of 15 mm, wide-rnging rectngulr types re vilble to meet diversified requirements. Types output type/dc 3-wire type Shpe Operting distnce (mm) type Remrks Non-embedded type 4 APS--4T APS--4N APS-11-4T APS-11-4N APS-12A-4T APS-12A-4N APS-13-4T APS-13-4N Upper fce sensing Frequency clssifiction model vilble 7 15 APS-13-7T APS-13-7N APS-14-15T APS-14-15N APS-15-15N Frequency clssifiction model vilble ( L is dded t the end of model number) Side fce sensing Frequency clssifiction model vilble ( L is dded t the end of model number) APS- 15 * Frequency clssifiction models (L) re non-stock products. 79

2 Rectngulr type APS- to 15 Series DC Voltge Type / DC 3-wire, Non-embedded Type Effective operting distnce 4 mm ±% 4 mm ±% 4 mm ±% Dimensions (mm) Remrks type DC voltge NPN NO Rted operting voltge T type N type Stndrd trget (mm) Rted operting distnce Responding mteril Differentil trvel Switching T type frequency N type APS--4T Upper fce sensing APS-11-4T 2,800 2,800 APS--4N APS-11-4N 2,800 2,800 DC+12 V (+ to +1 V) Permissible ripple rte: 3%p-p or less t 0 to 2.8 mm /nonferrous metl (operting distnce vries with mteril) Appro. % 300 Hz 1 khz 0 Hz Frequency clssifiction model vilble APS-12A-4T 2,020 APS-12A-4N 2,500 No-lod current 15 ma or less ma or less T type N type Rted operting current Production in/before Mrch 2000: +24 VDC (+20 to +28 V), permissible ripple rte: 3%p-p or less Production in/fter April 2000: +12/24 VDC (+ to +30 V), permissible ripple rte: 3%p-p or less impednce: 3.3 kw (output stndrd: 4P4N) Production in/before Mrch 2000: 0 ma m (lod voltge: V or less) Production in/fter April 2000: 0 ma m t +12 VDC (lod voltge: V or less) 200 ma m t +24 VDC (lod voltge: V or less) DC+24 V (+20 to +30 V) Permissible ripple rte: 3%p-p or less 1 khz 0 ma (+ C) 80 ma (+50 C) (lod voltge: 50 V or less) APS- 15 Voltge drop Lekge current Indictor lmp Operting temperture Temperture chrcteristics Withstnd voltge Insultion resistnce Vibrtion resistnce Impct resistnce Protection grde Csing mteril 1.0 V or less 300 ma or less Opertion indiction T type: -25 to +0 C - to +50 C N type: - to +50 C Within ±20% (of operting distnce t +20 C) 500 VAC, 50/0 Hz (1 minute) 5 MW or higher (500 VDC) Double mplitude: 1.5 mm, to 55 Hz (2 hours in ech of X, Y nd Z directions) 300 m/s 2, within 11 ms ( cycles in ech of X, Y nd Z directions) IP7 PBT resin Polycrbonte *1 Led wire Tightening torque Weight Oil-resistnt vinyl chloride cble 1.5 m Outer dimeter (ø4), 0.3 mm 2 3-wire 0.5 Nm or less Appro. 50 g Oil-resistnt vinyl chloride cble 1 m Outer dimeter (ø4), 0.3 mm 2 3-wire 0.4 Nm or less * The frequency clssifiction models hve L t the end of its model number (non-stock product). *1: To be chnged to PBT resin. 80

3 Rectngulr type APS- to 15 Series DC Voltge Type / DC 3-wire, Non-embedded Type Effective operting distnce 4 mm ±% 7 mm ±% 15 mm ±15% Dimensions (mm) Remrks type DC voltge NPN NO Frequency clssifiction model vilble APS-13-4T APS-13-7T Rted T type DC+12 V (+ to +1 V) Permissible ripple rte: 3%p-p or less operting voltge N type DC+24 V (+20 to +30 V) Permissible ripple rte: 3%p-p or less No-lod current T type: 15 ma or less N type: ma or less Stndrd trget (mm) Rted operting distnce Responding mteril Differentil trvel Switching T type frequency N type T type N type Rted operting current Voltge drop Lekge current 3,80 3,80 APS-13-4N APS-13-7N 4,900 5,3 (detection plne A) Frequency clssifiction model vilble APS-14-15T 5,150 APS-14-15N, t t t 0 to 2.8 mm 0 to 4.9 mm 0 to.5 mm /nonferrous metl (operting distnce vries with mteril) Appro. % 250 Hz 200 Hz 0 Hz 300 Hz 0 Hz impednce: 1.8 kω (output stndrd: 7PN) 300 ma (+ C or less) 200 ma (+50 C or less) (lod voltge: 50 V or less) 2.4 V or less 800 µa or less 300 µa or less (detection plne B) Frequency clssifiction model vilble APS-15-15N,120 Indictor lmp Operting temperture Temperture chrcteristics Withstnd voltge Insultion resistnce Vibrtion resistnce Impct resistnce Protection grde Csing mteril Led wire Tightening torque Opertion indiction - to +50 C Within ±20% (of operting distnce t +20 C) 500 VAC, 50/0 Hz (1 minute) 5 MΩ or higher (500 VDC) Double mplitude: 1.5 mm, to 55 Hz (2 hours in ech of X, Y nd Z directions) 300 m/s 2, within 11 ms ( cycles in ech of X, Y nd Z directions) IP PBT resin Polycrbonte *1 Oil-resistnt cble 1.5 m Outer dimeter (ø), 0.5 mm 2 3-wire 0.8 Nm or less APS- 15 Weight Appro. 150 g * The frequency clssifiction models hve L or H ( L only for APS-1/APS-15) t the end of its model number (non-stock product). *1: To be chnged to PBT resin. 81

4 Rectngulr type APS- to 15 Series APS- 15 Connection/Opertion output typet -T DC 3-wire type NPN output -N Model number Instlltion Proimity sensor Proimity sensor Brown Blck Blue Brown Blck Blue Note: Instlltion nd Influence of Surrounding Metls APS APS APS-12A-4... APS APS APS APS Plced in prllel with metllic infinite plne Trget A + + indictes lod Plced in prllel with metllic plne s fr s the detection plne * * Trget B 17.5 Plced in the hole of window-shped metllic C Trget 70 A metllic is plced in front of the sensor 35 Trget Not Present present ( ) Opertion indiction Opertion indiction Trget * Position of the trget for n upper fce sensing model If metllic is present ner the proimity sensor, the operting distnce chnges nd the opertion becomes unstble. Secure sufficient distnce from the sensor s long s possible. The D dimension (mm) is the minimum distnce from the proimity sensor s detection plne to the metllic body. Secure sufficient distnce longer thn the indicted dimension. D D Two sensors re plced in prllel with ech other Trget D (in mm) Plced to fce ech other Trget 82

5 Rectngulr type APS- to 15 Series Mutul Interference nd Clssifiction of Frequencies When using two or more proimity sensors in close contct with ech other, secure n intervl between the proimity sensors (center to center) t lest times the operting distnce. If the intervl is indequte, mutul interference my occur. In pplictions where it is impossible to secure dequte intervls, use models clssified by frequency. Normlly, frequency clssifiction is indicted by n lphbet immeditely fter the operting distnce of the model number. Those models clssified by frequency hve either of the following mrkings on the cble so tht they cn esily be distinguished from other models. For high frequencies (H) : yellow spirl mrk For low frequencies (L) : red spirl mrk Emple: APS-13-4T (M) -4N(M) APS-13-4TL - 4NL APS-13-4TH - 7TH Detection Are Digrms (Representtive Emples) APS--... APS Model with stndrd frequency (normlly, "M" is omitted) Model with lower frequency thn the stndrd frequency Model with higher frequency thn the stndrd frequency APS-12A-... Combintions of models clssified by frequency (cn be instlled in close contct with ech other) APS-12A-4T(M)LH APS-12A-4N(M)LH APS-13-4T(M)LH APS-13-4N(M)L APS-13-7T(M)H APS-14-15T(M)L APS-14-15N(M)L APS-15-15N(M)L L M) APS APS L (M) H * To instll four or more sensors in close contct, preliminry study is required. M) H * To instll three or more sensors in close contct, preliminry study is required. APS APS APS

6 Rectngulr type APS- to 15 Series Shpe Chrcteristics (Representtive Emples) APS--... APS Operting distnce X (mm) Length of one side of trget (mm) APS Operting distnce X (mm) Length of one side of trget (mm) APS-12A-... Operting distnce X (mm) Length of one side of trget (mm) APS APS Operting distnce X (mm) Length of one side of trget (mm) APS Operting distnce X (mm) Length of one side of trget (mm) APS

7 Rectngulr type APS- to 15 Series Instlltion APS--... APS Mounting surfce 21±0.2 M3 hegon nut SEMS screw M3-12 pn-hed M3 tpped hole or 3.4 hole Plne wsher APS