Widths. mm 115. Qty/m KS115H68/2 KS130H68/ , /4 KS170H68/2. Widths. Catalogue CODE Qty/m. Widths. 1pc 0.
|
|
- Francis Underwood
- 5 years ago
- Views:
Transcription
1 System E-, E-90 - Wll Trunking Wll Trunking (pinted) KS 3 KS...H 1.0 Widths ength Ctlogue kg 1m /m KS1H/ 1 000, /4 KS1H/ , /4 KSH/ 000 3, 9011 /4 Cover for Wll Trunking (pinted) PKS PKS 1.0 Widths ength Ctlogue kg 1m /m PKS /0 Internl Bend (pinted) KWKS KWKS...H KWKS1H KWKS1H KWKSH ote: Cover included Widths 1 1 kg 1pc Ctlogue Externl Bend (pinted) KZKS KZKS...H KZKS1H KZKS1H KZKSH ote: Cover included Widths 1 1 kg 1pc Ctlogue Elbow (pinted) KPKS H KPKS...H KPKS1H KPKS1H KPKSH ote: Cover included Widths 1 1 kg 1pc Ctlogue , 9041 APPICATIO Indoor cble routing for power, voice nd dt services ATERIA Electro-glvnised steel (EGS) to P-E. Pint-finished white to RA 90 or grey to RA 03. Avilble to order: - powder coting in full rnge of colours (PC) (info pge 4) 134 Thickn. (g) []: 0, 0, 1,0 1, 1,,0
2 System E-, E-90 - Wll Trunking Tee (pinted) TSKS TSKS...H TSKS1H TSKS1H TSKSH ote: Cover included Widths 1 1 kg 1pc 1, 1.0 Ctlogue , ,4 901 APPICATIO Indoor cble routing for power, voice nd dt services ATERIA Electro-glvnised steel (EGS) to P-E. Pint-finished white to RA 90 or grey to RA 03. Avilble to order: - powder coting in full rnge of colours (PC) (info pge 4) Blind End (pinted) ZK 3 H ZK...H ZK1H ZK1H ZKH ZKH Width 1 1 kg 1 pc 1,0 Ctlogue 0, , , ,1 901 Trunking Clmp (pinted)...h 1H 1H H H Width 1 1 kg 1 pc 0,0 0,0 0,03 0,03 1,0 Ctlogue APPICATIO Creting semless joints of trunking sections. ATERIA Electro-glvnised steel (EGS) to P-E. Pint-finished white to RA 90 or grey to RA 03. Avilble to order: - powder coting in full rnge of colours (PC) (info pge 4) Flt Spring SU SU 1,0 Width Ctlogue kg 1 pc SU 0 0, otched Connector KS 0 KSH 1,0 Width Ctlogue kg 1 pc KSH 0 0, APPICATIO Joining together surfce trunking sections ATERIA Brss-plted spring steel 13 Thickn. (g) []: 0, 0, 1,0 1, 1,,0
3 E, E90 Systems - Junction Box Junction Box PO1 PO1 Terminls Cble Glnds Cble dimeters Connection Box Junction Box Ctlogue PO1(/) 0, 0, 1, 01 1 PO1(/3) 3 0, 0, 1, 00 1 PO1(3/3) 3 3 0, 0, 1, Ø 9 PO1E Terminls Cble Glnds Cble dimeters Connection Box Junction Box Ctlogue PO1(/)E 0, 0, 1, PO1(/3)E 3 0, 0, 1, 01 1 PO1(3/3)E 3 3 0, 0, 1, Protection clss IP Cble dimeters possible to connect in one hole in terminl (connections box) 0,- Cble dimeters possible to connect in one hole in terminl junction box) x0, x0, 4x1,0 3x1, 1x, +1x1, APPICATIO Connection nd junction box, Ui=0 V, electricl functionl integrity E / E0 / E90 cc to I 4 prt 1. Protection clss IP, seling from to 1.. Assembly through mounting holes to the concrete by Bolt Anchors SROx. Assembly to cble ldders nd cble trys by Screw sets SGKx1 nn the wire meshcble try by UP1 or UPP... ounting Pltes by Screw sets SGx1. ist of ssembly elements to fix Junction boxes PO1 nd PO1E Possible to pply Cble Glnds. ATERIA PO1 - Steel, powder coted to RA 003 PO1 E - stinless steel 1.41 powder coted to RA Terminl mde from specil high temperture resistnt cermics, - Cble glnd mde from hlogen-free mteril - Fixing through integrted steel grips rilling holes Øx Øx0 Øx4 Øx4 Øx Øx3 Ø Screw Type of surfce SROx SBOx0 GSOx PSROx4 KRx3 KSKO KKG Silicte-type brics SGKx1 SGKx Poretherm Krton gips Aerted concrete Hollow core Cble route constructions Assembly steps PO1 (/3) - ssembly to the surfce - tking of the cover - mking holes in cble glnds - pulling cbles through cble glnds - connecting the cbles in terminls PO1 (3/3) - protection cble connect lwys green/yellow PE terminl - fixing the cbles mx. 0 from the junction box - instltion of the cover PO1 (/)
4 E, E90 Systems - Junction Box Junction Box PO PO Terminls Cble Glnds Cble dimeters Connection Box Junction Box Ctlogue PO(/) PO(/3) PO(3/3) Ø 9 POE Terminls Cble Glnds Cble dimeters Connection Box Junction Box Ctlogue PO(/)E PO(/3)E PO(3/3)E Cble dimeters possible to connect in one hole in terminl (connections box) 1- Protection clss IP Cble dimeters possible to connect in one hole in terminl junction box) x1,0 x1, 4x, x4,0 APPICATIO Connection nd junction box, Ui=0 V, electricl functionl integrity E / E0 / E90 cc to I 4 prt 1. Protection clss Ip, seling from 11 to 4. Assembly through mounting holes to the concrete by Bolt Anchors SROx. Assembly to cble ldders nd cble trys by Screw sets SGKx1 nn the wire meshcble try by UP or UPP... ounting Pltes by Screw sets SGx1. Possible to pply 3 Cble Glnds. ATERIA PO - Steel, powder coted to RA 003 PO E - stinless steel 1.41 powder coted to RA Terminl mde from specil high temperture resistnt cermics, - Cble glnd mde from hlogen-free mteril - Fixing through integrted steel grips ist of ssembly elements to fix Junction boxes PO nd POE rilling holes Øx Øx0 Øx4 Øx4 Øx Øx3 Ø Screw Type of surfce SROx SBOx0 GSOx PSROx4 KRx3 KSKO KKG Silicte-type brics SGKx1 SGKx Poretherm Krton gips Aerted concrete Hollow core Cble route constructions Assembly steps PO (/3) - ssembly to the surfce - tking of the cover - mking holes in cble glnds - pulling cbles through cble glnds - connecting the cbles in terminls PO (3/3) protection cble connect lwys green/yellow PE terminl - fixing the cbles mx. 0 from the junction box - instltion of the cover PO (/)
5 E, E90 Systems - Junction Box Junction Box PO3 PO3 PO3(/4) Terminls Cble Glnds 4 Cble dimeters Connection Box Junction Box Ctlogue PO3E PO3(/4)E Terminls Cble Glnds 4 Cble dimeters Connection Box Junction Box Ctlogue x1 Cble dimeters possible to connect in one hole in terminl 1-1 Protection clss IP APPICATIO Connection nd junction box, Ui=0 V, electricl functionl integrity E / E0 / E90 cc to I 4 prt 1. Protection clss IP, seling from to. Assembly through mounting holes to the concrete by Bolt Anchors SROx. Assembly to cble ldders nd cble trys by Screw sets SGKx1 nn the wire meshcble try by UP or UPP... ounting Pltes by Screw sets SGx1. Possible to pply Cble Glnds. ATERIA PO3 - steel, hot-dip glvnised to P-E ISO 1:011, powder coted to RA 003 PO3E - stinless steel 1.41 powder coted to RA Terminl mde from specil high temperture resistnt cermics, - Cble glnd mde from hlogen-free mteril - Fixing through integrted steel grips ist of ssembly elements to fix Junction boxes PO3 nd PO3E rilling holes Øx Øx0 Øx4 Øx4 Øx Øx3 Ø Screw Type of surfce SROx SBOx0 GSOx PSROx4 KRx3 KSKO KKG Silicte-type brics SGKx1 SGKx Poretherm Krton gips Aerted concrete Hollow core Cble route constructions Assembly steps - fixing the cbles mx. 0 from the junction box 0 0 KSA
6 E, E90 Systems - Junction Box Junction Box with Fuse PO3B PO3B PO3B(/4) Terminls Cble Glnds 4 Cble dimeters Connection Box Junction Box Ctlogue PO3BE PO3B(/4)E Terminls Cble Glnds 4 Cble dimeters Connection Box Junction Box Ctlogue Cble dimeters possible to connect in one hole in terminl 1-1 Protection clss IP 9x1 APPICATIO Connection nd junction box, Ui=0 V, electricl functionl integrity E / E0 / E90 cc to I 4 prt 1. Protection clss IP, seling from to. Assembly through mounting holes to the concrete by Bolt Anchors SROx. Assembly to cble ldders nd cble trys by Screw sets SGKx1 nn the wire meshcble try by UP or UPP... ounting Pltes by Screw sets SGx1 or SGKx1 Possible to pply Cble Glnds. ATERIA PO3B - steel, hot-dip glvnised to P-E ISO 1:011, powder coted to RA 003 PO3BE - stinless steel 1.41 powder coted to RA Terminl mde from specil high temperture resistnt cermics, - Cble glnd mde from hlogen-free mteril - Fixing through integrted steel grips - Fus socket 01 ist of ssembly elements to fix Junction boxes PO3B nd PO3BE rilling holes Øx Øx0 Øx4 Øx4 Øx Øx3 Ø Screw Type of surfce SROx SBOx0 GSOx PSROx4 KRx3 KSKO KKG Silicte-type brics SGKx1 SGKx Poretherm rywlls Aerted concrete Hollow core Cble route constructions Assembly steps - fixing the cbles mx. 0 from the junction box 0 0 KSA
7 System E-, E-90 - Cble Hngers nd Clips Cble Clip UF Ø UF... UF UF UF UF UF9 UF UF1 UF UF... UF UF1 UF1 UF0 UF UF UF UF UF3 UF33 UF3 UF3 UF UF4 Guge 9 1 Guge For the instlltion use the following bolt options: - SROx - SRBOx + S + PP - SBOx0 - KWBOx3 or KWBOx - GSOx - KSKO - KKG - KRx3 - PSROx4 - S4,x1 1, Ctlogue 9 1,0 Ctlogue Cble Clip UEF Ø APPICATIOS Fixing cbles directly to the wlls nd ceilings UEF... UEF UEF UEF UEF UEF9 UEF UEF1 UEF UEF... UEF UEF1 UEF1 UEF0 UEF UEF UEF UEF UEF3 UEF33 UEF3 UEF3 UEF UEF4 Guge 9 1 Guge For the instlltion use the following bolt options: - SROx - SRBOx + S + PP - SBOx0 - KWBOx3 or KWBOx - GSOx - KSKO - KKG - KRx3 - PSROx4 - S4,x1 1, Ctlogue 9 1,0 Ctlogue ATERIA Electro-glvnised steel (EG). Avilble finishes F - steel, hot-dip glvnised Instlltion Exmple of Two ifferent Sizes of Cble Clips UF on Single Bolt SRO Appliction Exmple of UF, UEF Specil longer distnce between the clips: mx 00 mx 00 UEF SRO UF 0 Thickn. (g) []: 0, 1,0 1, 1,,0
8 System E-, E-90 - Cble Hngers nd Clips Cble Clip UFB... UFB... UFB UFB UFB UFB UFB9 UFB UFB1 UFB UFB... UFB UFB1 UFB1 UFB0 UFB UFB UFB UFB UFB3 UFB33 UFB3 UFB3 UFB UFB4 Guge 9 1 Guge , Ctlogue ,0 Ctlogue ATERIA Electro-glvnised steel (EG). Avilble finishes F - steel, hot-dip glvnised Cble Clip UEFB... APPICATIO Fixing cbles directly to the wlls nd ceillings using the Gs il Gun UEFB... UEFB UEFB UEFB UEFB UEFB9 UEFB UEFB1 UEFB UEFB... UEFB UEFB1 UEFB1 UEFB0 UEFB UEFB UEFB UEFB UEFB3 UEFB33 UEFB3 UEFB3 UEFB UEFB4 Guge 9 1 Guge , Ctlogue ,0 Ctlogue ATERIA Electro-glvnised steel (EG). Avilble finishes F - steel, hot-dip glvnised An exmple of UFB ppliction using the Gs il Gun 1 ying the clmp to the cble Shooting in the nil using the Gs il Gun 3 1 Thickn. (g) []: 0, 1,0 1, 1,,0
9 E, E90 Systems - Cble Hngers md Clips mde from stinless steel Cble Clip UF...E Ø UF...E UFE UFE UFE UFE UF9E UFE UF1E UFE UF...E UFE UF1E UF1E UF0E UFE UFE UFE UFE UF3E UF33E UF3E UF3E UFE UF4E Guge 9 1 Guge , Ctlogue ,0 Ctlogue Cble Clip UEF...E Ø UEF...E UEFE UEFE UEFE UEFE UEF9E UEFE UEF1E UEFE UEF...E UEFE UEF1E UEF1E UEF0E UEFE UEFE UEFE UEFE UEF3E UEF33E UEF3E UEF3E UEFE UEF4E Guge 9 1 Guge , Ctlogue ,0 Ctlogue For the instlltion use the following bolt options: - SROx - SRBOx + S + PP - KWBOx3 or KWBOx - KSKO - PSROx4 APPICATIOS Fixing cbles directly to the wlls nd ceilings ATERIA Stinless steel, grde 1.41 (AISI4). Instlltion Exmple of Two ifferent Sizes of Cble Clips UF on Single Bolt SRO Appliction Exmple of UF, UEF Specil longer distnce between the clips: mx 00 mx 00 UEF SRO UF Thickn. (g) []: 0, 1,0 1, 1,,0
10 E, E90 Systems - Cble Hngers md Clips mde from stinless steel Cble Clip UFB...E UFB...E UFBE UFBE UFBE UFBE UFB9E UFBE UFB1E UFBE UFB...E UFBE UFB1E UFB1E UFB0E UFBE UFBE UFBE UFBE UFB3E UFB33E UFB3E UFB3E UFBE UFB4E Guge 9 1 Guge , Ctlogue ,0 Ctlogue Cble Clip UEFB...E APPICATIO Fixing cbles directly to the wlls nd ceillings using the Gs il Gun UEFB...E UEFBE UEFBE UEFBE UEFBE UEFB9E UEFBE UEFB1E UEFBE UEFB...E UEFBE UEFB1E UEFB1E UEFB0E UEFBE UEFBE UEFBE UEFBE UEFB3E UEFB33E UEFB3E UEFB3E UEFBE UEFB4E Guge 9 1 Guge , Ctlogue ,0 Ctlogue ATERIA Stinless steel, grde 1.41 (AISI4). An exmple of UEFB ppliction using the Gs il Gun 1 ying the clmp to the cble Shooting in the nil using the Gs il Gun 3 3 Thickn. (g) []: 0, 1,0 1, 1,,0
11 E, E90 Systems - Cble Hngers md Clips Cble Hnger OZ/OZO Ø Ø OZ/OZO OZ/OZO OZS/OZSO 1, Guge Guge Guge Sfe Working od Ctlogue b H kg F mx[k/m] 1 pc 0,0 0,3 0 0, OZS/OZSO Ø H Ø0 b Guge Guge Guge Sfe Working od Ctlogue b H kg F mx[k/m] 1 pc OZS/OZSO 3 1 0,0 0,1 0 OZ/OZO 0, H Guge Guge Guge Sfe Working od Ctlogue b H kg F mx[k/m] 1 pc OZ/OZO ,01 0,0 0 OZ/OZO APPICATIOS Suspending cble routes. Cble Clip KSA H Ø Ø1 b Ø b For the instlltion use the following bolt options: - SROx - SRBOx + S + PP - KWBOx3 or KWBOx - GSOx - KSKO - KKG - KRx3 - PSROx4 or PSROx Sfe working lod: see Sfe ods Tble Stndrd spcing of supports: 0,3m Upgrded stndrf supports 0.m KSA... Guge мм Ctlogue KSA 0 KSA 0 KSA 01 KSA1 011 KSA 01 KSA1 011 KSA KSA KSA KSA4 4-0 KSA - 01 KSA - 01 KSA KSA KSA KSA KSA KSA KSA KSA KSA - 0 ATERIA Steel, strip-glv. cc. to the Sendzimir method to P-E 34:011 (SG) Avilble finishes: E - stinless steel (SS) P-E - only OZ/OZO APPICATIOS Fixing cbles directly to the wlls nd ceilings For the instlltion use Bolts SRBOx nd Threded Rod PG with rop-in Anchor TRSO ATERIA Electro-glvnised steel (EG). Screw KX KX Ctlogue KX 0 APPICATIO Instlling to pieces of Cble Clip KSA together ATERIA Electro-glvnised steel (EG). Exmple of ssembly cbles in OZ/OZO Cble Hnger to the wll or ceiling Appliction Exmple of Cble Clip KSA Specil longer distnce between the clips 00 mx 00 UF Appliction Exmple of Screw Kx with Cble Clip KSA... SROx KSA mx. 00 SRBO KSA Kx KSA or KSA For the instlltion use Bolts SRBOx PG or PG 4 Thickn. (g) []: 0, 1,0 1, 1,,0
12 System E-, E-90 - Pipes nd Clips Thin-wlled Pipe RU... Ø 1, RU... 1, i. kg Ctlogue Ø 1 pc RU1x1,/3F 1 0,4 001 RU0x1,/3F 0 0, 00 RUx1,/3F 0, 003 RU3x1,/3F 3 1, RUx1,/3F 1,4 00 RUx1,/3F 1,9 00 RU0x1,/3F 0,1 00 RU3,x1,/3F 3,, APPICATIOS Protection of electricl wiring ginst mechnicl dmge Pipe Clmps OBS... Ø OBS... Rnge Guge Ctlogue Ø OBS1 1-19, x OBS0 0-3, x 00 OBS 3,- x 003 OBS,-33 x OBS 3- x1 00 OBS 43- x 00 OBS0 4-3 x 00 0 ATERIAŁ Steel, hot-dip glvnised (HG) Avilble finishes: - powder coting in full rnge of colours (PC) (info p.4) APPICATIOS irect mounting wires to wlls nd ceilings ATERIA Electro-glvnised steel (EG). An exmple of mounting Thin-Wlled Pipe RU to ceiling TRSO... An exmple of mounting Thin-Wlled Pipe RU to ceiling SBO...* PG... OBS...* S...* PP...* 00 *Alterntively KSA cble cip n be pplied *lterntiely other screws or pins cn be used from ll BAKS products tht do not exceed the dimeter of.
13 E, E90 Systems - Fstenings nd Fixings Screw Set S Wsher PP S... Guge ength Ctlogue Sx Sx Sx Sx0 Sx Sx Sx0 Sx Sx 43 S1x 1 13 PP... For Bolt Ctlogue set Wsher PW PW... PP 44 PP PP PP For Bolt Ctlogue ut Rod Connector APPICATIO Combining components of the systems S PW 44 PW 944 PW 44 Guge S S S S1 1 Guge ength Ctlogue Ctlogue Threded Rod PG... APPICATIO Suspending cble routes Screw Set SG/SGF Screw Set SGK/SGKF APPICATIO Combining components of the systems PG... PG/1 PG/ PG/3 PG/01 PG/0 PG/03 PG/1 PG/ PG/3 PG/1 PG/ PG/3 PG1/1 PG1/ PG1/3 SG... Guge ength Ctlogue SGx SGx SGx SGx0 0 4 SG1x 1 4 SGF... SGFx1 SGFx SGK... SGKF... Guge Guge ength ength 1 kg Ctlogue 1 pc 0,1 1 0,3 1 0,4 01 0,03 1 0,0 01 0, ,3 01 0, ,9 1 0,49 1 1, , 1 0, 1 1,44 11,1 1 Ctlogue 1 0 set set Guge ength Guge Ctlogue SGKx SGKx SGKx SGKx 1 1 SGKx SGKx0 0 0, 1341 Guge ength Guge Ctlogue SGKFx SGKFx 1 41 SGKFx SGKFx0 0 0, 1 EW! Steel, Zinc-flke coting set set ATERIA Electro-glvnised steel (EG). Avilble finishes: E - stinless steel, grde 1.41 (A) or 1.44 (A4) ATERIA SGF/SGKF Steel, Zinc-flke coting P-E ISO 3:0-09
14 E, E90 Systems - Fstenings nd Fixings Anchor Bolt SRO SRO Guge ength Ctlogue SROx x SRBO Guge ength Ctlogue SRBOx SRO SRBO ATERIA Electro-glvnised steel (EG). Avilble finishes: E - stinless steel, grde 1.44 (A4) Anchor Bolt PSRO APPICATIO Instlling ssemblies, suspending cble routes form overhed concrete bse PSRZ PSRO... PSROx4 PSROx PSROx PSROx0 PSRO1x PSRZ... Guge 1 Guge ength 4 0 ength PSRZx PSRZx0 PSRZ1x 1 1 Ctlogue Ctlogue ATERIA Electro-glvnised steel (EG). Avilble finishes: F- steel, hot-dip glvnised (HG) E - stinless steel, grde 1.44 (A4) APPICATIO Instlling ssemblies, suspending cble routes form overhed concrete bse (uncrcked, two-wy slb, crcked). rop-in Anchor TRSO TRSO... TRSO TRSO TRSO TRSO1 Guge 1 ength Ctlogue TRSK APPICATIO Suspending cble routes TRSK... TRSK TRSK TRSK TRSK1 Guge 1 Ctlogue irect suspension of cble run without the use of Rod Hnger USV/USOV. ATERIA Electro-glvnised steel (EG). Avilble finishes: E - stinless steel, grde 1.44 (A4) Quick ock Anchoring Screw SKTO... SKTO... Guge kotwy Guge Guge Ctlogue 1 SKTOx3 / 3 91 SKTOx / SKTZO... 1 b APPICATIOS Anchoring in concrete (uncrcked, two-wy slb, crcked). Allows for mounting or Threded Rod (SKTO ). SKTZO... Guge kotwy Guge Guge Guge Ctlogue 1 b SKTZOx SKTZOx 1 94 SKTZOx SKTZOx 1 9 ATERIA Electro-glvnised steel (EG).
15 E, E90 Systems - Fstenings nd Fixings Self-drilling Screw S4,x1 1 S,x3 3 4,, S4,x1 S4,x1 S,x3 Thickness Thickness Elements of the steel of Assembly substrte 1-0,-4 Thickness Thickness Elements of the steel of Assembly substrte 1-4- Ctlogue 043 Ctlogue S,x3 044 APPICATIO ounting UF... nd UEF... cble clmps to steel surfces (sndwich pnels, trpezoidl steel sheets) Ceiling il GSO Ø GSO rill Bit Screw Hedin Anchorge Usble i. epth ength Ctlogue h h o ef t GSOx 4 3 4, 0399 ATERIA for KWBO Electro-glv. steel (EG). 39 t h o h ef Anchor Bolt KKG 3 x4 APPICATIOS Construction mounting, Instlltion of the cble route to the drywll t fix d p KKG x x thickness ength rill Usble thickness Elements Bit Ctlogue t fix ength of the drywll of ssembly KKGx KKGx ATTETIO! - Assembly only to the drywlls Anchor Bolt KR t l=h ef x/ x APPICATIOS In Steelling, ssembling, hnding cble route to Autoclved erted concrete, Silicte brics, concrete nd Porotherm style cly block bricks Screw SBSO 90 d f KR... KRx3 KRx3 rill Bit in rill epth h ef Usble ength Ctlogue t ATTETIO! - for ssembly to Porotherm style cly block bricks do not use her drill - to ssembly in erted concrete nchors cn be drived in without previously drilled holes. SBSO... SBSOx90 SBSOx90 rill Bit Hole i. in Substrte d f 1 in rill epth h o Usble ength t Ctlogue ATERIA for KWBO Electro-glv. steel (EG). h o t Screw SBO d 0 d f SBO... SBOx0 SBOx0 rill Bit Hole i. in Substrte d f in rill epth h o Usble ength t Ctlogue APPICATIOS Instlling ssemblies, suspending cble from overhed concrete bse Screw WB h o t WB,x ength rill Bit Hole i. in rill Usble in Substrte epth ength Ctlogue d f h o t fix WB,x, 00 ATERIA for KWBO Electro-glv. steel (EG). APPICATIOS Fixing to concrete Cble Clips UF..., UEF... nd Cble Hngers OZ... ATERIA for KWBO Electro-glv. steel (EG). Instlltion Exmple of Screw SBSO Hole drilling Hole blowing out with 1 the 3 4 clening pump Instlling the screw Instlltion Exmple S4,x1 steel surfces UF...
16 E, E90 Systems - Fstenings nd Fixings il Anchor KWBO Ø13 3/4 APPICATIOS Fixing ssemblies, suspending cble runs from overhed concrete bse Hollow - Ceiling Anchor KSKO h o t h ef KWBO... rill Bit Screw Hed in Anchorge in rill Usble i. epth d epth ength Ctlogue o ef h o t KWBOx KWBOx KSKO... rill Bit in rill epth h ef KSKO KSKO 1 3 KSKO 1 Anchor ength Ctlogue APPICATIOS Fixing ssemblies, suspending cble runs from overhed concrete nd precst hollow core flooring slb bses. ATERIA for KSKO Electro-glv. steel (EG). Thred Rod PGS... PGS... x. Usble Thred ength ength tfix PGSx PGSx1 1 0 PGS1x 1 Effective Anchorge epth hef x. Brekout Force [k], 1,3 19, OTE! To be used with ZI0 mortrs in solid concrete kg 1 pc 0,04 0,0 0, Ctlogue APPICATIO ounting od steel structures, rils, consoles, ldders, cble routes, steps, gtes, fcdes; ssembly with spcers nd ssembly of wooden structures Glss Ampule (comes s set with PGS...) AS... APPICATIO ounting od steel structures, rils, consoles, ldders, cble routes, steps, gtes, fcdes; ssembly with spcers nd ssembly of wooden structures Injection ortr ZI0 EEETS A set includes: 1 continer 0 ml + mixers h ef AS... AS AS AS1 APPICATIO + C- + C ounting od steel structures, rils, rcks, + C- +0 C consoles, gtes, fcdes, window elements; +0 C- + C ssembly with spcers + C- + C Hollow Ceiling Anchor KSKO - Stges of Instlltion t fix Thred rill 1 Usble lenght t Effective Anchorge depth hef C- + C 3 h + C- +0 C h ATERIA +0 C- + C 0 min. Polyester resin + C- + C min. il Anchor KWBO - Stges of Instlltion 1 Ctlogue AVATAGES: High resistnce nd low resin shrinkge llow for pplying highest lods to solid concrete. This methof nchoring is free of expnsion stress. ZI0 ZI0 Cpcity ml 0 Ctlogue Set OTE! Styrene free injection mortr ZI0 (suer version), to be used with stndrd silicone pistols AVATAGES: High hybrid resistnce of hevy-lod mortr for ll types of construction mterils. A universl ssembly system for ny site! esigned for nchoring of reinforcement brs. First injection system w ith pprovl for concrete, nchoring of reinforcement brs, solid nd hollow blocks, nd erted concrete. rying Time Temp. conteiner Geltion time 0 min. min. min. 4 min. Floor Temp. rying Time ATERIA Zinc-coted steel ATERIA Vinylester resin 3 Assembly of the PGS... thred br with the AS... mpoule - exmple 1 rill hole Blow the hole 3 Insert 4 Screw through the mpoule the br in Assembly of the PGS... thred br with the ZI0 injection mortr 1 rill hole Blow the hole 3 Put the mortr in 4 Insert through the br 9
17 E, E90 Systems - Fstenings nd Fixings Crtridge ils for GWT smin cmin hmin tfix GWT... i. ength Ctlogue d quntity quntity in the crtrige in the pck GWT3,X0 3, GWT3,X 3, 41 0 GWT3,X 3, 1 0 GWT3,X 3, 41 0 C1/0 in Thickness C0/ C/ Floor Totl nchorge depth C1/0 C0/ C/ in spcing of nils in distnce from the corner Fix element Thickness C1/0 C0/ C/ GWTS3,X Crtridge ils for Steel GWTS3,X GWT3,X0 GWT3,X GWT3,X GWT3,X hmin [] GWTS... hmin [] hmin [] hnom [] hnom [] hnom [] smin [] cmin [] tfix [] tfix [] - - i. ength Ctlogue d quntity quntity in the crtrige in the pck GWTS3,X 3, 01 0 tfix [] - 0 smin cmin hmin tfix GWTS3,X in Thickness Steel hmin Steel hmin [] [] 4 4 Floor Totl nchorge depth Steel hnom [] 4 Steel hnom [] 4 in spcing of nils Steel OTE! GWT3,x0 nils re designed for the following new types of full clmps: UFB..., UEFB... If you order 1, nils, you get gs for the nil gun free of chrge! OTE! If you order over,000 nils, you get nil gun free of chrge! smin [] in spcing of nilsi Steel smin [] in distnce from edge Steel cmin [] in distnce from edge Steel cmin [] Fix element Thickness Steel tfix [] Steel tfix [] 3 APPICATIO ounting of full clmps. Comptible with gs nil gun. Gs il Gun, Cordless OGB 9 OGB Bering Cpcity Effective nchorge depth STRETCHIG Recomended bering cpcity Cutting Recomended bering cpcity C1/0 hef [],00 Rk,p [k] 0,0 VRk,p [k] 0,0 kg 1 pc Ctlogue OGB 3, 41 1 SPECIFICATIOS Rnge of high of the nils Type of the nils ATERIA ils - smooth with round hed Steel/ Cpcity of the Crtrige Bttery c hrging time h ximum bttery performnce 000 Floor C0/ hef [] C/ hef [],00 0,00 Rk,p [k] Rk,p [k] 0,0 0,0 VRk,p [k] oise level 9dB VRk,p [k] 0,0 0,0 HIGHIGHTS Gs nil gun for concrete - gs cpcity: min 1, shots, - bttery life: mx,000 shots APPICATIO esigned for fixing full clmps with nils. OTE! If you order over,000 nils, you get specil price for the nil gun! AVATAGES: Esy djustment of nchoring depth. A big mgzine cn crry up to nils with length of up to. Stte-of-the-rt, high-bsorption nd resistnt bck filter. gnetic ring ensures simple ppliction of clmps nd clips. il Gun Gs GO APPICATIO Gs for nil guns nd str grip nilers GO Ctlogue GO 4 1 SPECIFICATIOS Fuel Type Propn/ Butn Assembly of the PGS... thred br with the ZI0 injection mortr orriction Yes Cpcity ml Weight 34g Rnge of tempertures - do 3ºC Efficiency min. 0 shots 1 rill hole Blow the hole through 3 Put the mortr in 4 Insert the br 0
18 > E, E90 Systems - Fire Brriers Intumescent Fire Protection Coting PYRO - SAFE KS1 APPICATIO: Protecting cble routes with fire-retrdnt cotings prevents: - ignition of cbles from n externl source of fire - ignition of cbles in cse of short-circuit or overheting - migrtion of flme long cble combustible jcketing - propgtion of fire by dripping, burning clodding - lterntive to other pssive fire protection solutions PYRO - SAFE KS1 Ctlogue PYRO - SAFE KS1 001 kg. 1, OTE: - mix thoroughly (stirring the emulsion for minutes minimum using drill nd pddle - recoended) before the ppliction; emulsions cn be dispersed dding to 3% wter - spred with brush, pint roller, or spry pint. It is suggested to spry pint with n Airless gun, for which strongly dvised re: FAOPAST KS1- working pressure br, nozzle: , no filter. Only properly prepred coting will secure properly cbles ginst fire Endothermic, Wether Resistnt Fire Protection Coting FAOTECT-A APPICATIO: - FAOTECT-A is intended for protecting electricl cbles in inside nutside res, in the rooms exposed to moisture nd tmospheric influences (iersing the coting in se wter for few weeks did not chnge its chrcteristics). Intumescent Fire-Protection Filler PYRO - SAFE KS3 APPICATIO: PYRO-SAFE FAOPAST KS3 is used for seling cble pssges in fire-resistnce clsses El0 or El. FAOTECT-A PYRO - SAFE KS3 Ctlogue FAOTECT-A 00 OTE: - mix thoroughly (stirring the emulsion for minutes minimum using drill nd pddle - recoended) before the ppliction; emulsions cn be dispersed dding to 3% wter - spred with brush, pint roller, or spry pint. It is suggested to spry pint with n Airless gun, for which strongly dvised re: FAOTECT-A - working pressure br, nozzle: , no filter. Only properly prepred coting will secure properly cbles ginst fire Ctlogue PYRO - SAFE KS3 00 Seling is mde through filling by the redy to use mortr. kg. 1, kg. 1, ECOOY: Fire-Resistnce clss EI 0 EI ry Film Thickness >00µm (0,) >0µm (1,0) teril Consumption 1,4 kg/m RYIG TIE: At mbient temperture 3 C nd reltive humidity %: to the touch fter pprox. hours, cured fter 4 dys. ECOOY: ry Film Thickness 0 µm Wet Film Thickness µm (Single-stge sprying),0 kg/m teril Consumption 1,0 kg/m RYIG TIE: At mbient temperture 3 C nd reltive humidity %: to the touch fter pprox. hours, cured fter 4 dys. RYIG TIE: At mbient temperture 3 C nd reltive humidity %: To the touch fter pprox. hours. Cured fter dys. Cble Try Fire Brrier Exmple of Assembly min. min.0 APPICATIO: It ensures protection in fire-resistnce clsses El 0 or El. The /m. cble pssge cn be penetrted simultneously by: - cbles of ll type nd dimension together with their supporting structures such s wire mesh cble trys, cble ldders or trys mnufctured from luminum, steel, or plstic ~0 min.0 3 ~000 1 The width of the fire brier cn be equl or bigger thn the width of the trys nd ldders. It should lso be distnced from bove by min. 0 Instlltion rrngement in the wll pssge El 0 nd El from brick, plin nd erted concrete 1. Supporting structure for cbles: cble try.. Supporting structure for cbles: cble ldder. 3. Supporting structure for cbles: wire mesh cble try. B >00 A. Plte of minerl wool thick min nd 0g/dm3 dense. B. Pint FAOPAST KS1 (cbles nd their supporting structures should be pinted in the distnce from wll 00 min nd the wll itself should be pinten the surfce lrger thn the opening size of min to the side). C. oose minerl wool + intumescent filler PYRO-SAFE KS3 for cvity filling. A C 1
19 E, E90 Systems - Fire Brriers Fire-Protection ortr PROASTOP TYP-S ZOS mx 0 PROASTOP TYP-S Ctlogue ZOS 00 kg 0 Technicl Approvl: AT--/00 Certificte of Conformity: ITB 0949/W eclrtion of Conformity: no. Z- mx 000 Product description: The mix of concrete, mortr nd light dditives. APPICATIO: PROASTOP Type-S Fire-Stop ortr llows for mking cble pssges in the fire resistnce clsses from EI to EI. According to the specifiction from the mnufcturer universl pssges re llowble with the mix of electric conduits, plstic tubes (ø 00 mx.), steel nd cst iron tubes (ø 1.3 mx.). Instructions for use: rrnge the cble route through pssges seled with Fire-Stop ortr ZOS mximum cble lod llowed in pssge will not exceed 0% the wll nd ceiling thickness to construct the pssge will not fll below: - for concrete wlls -0 for solid brick nd cell concrete wlls - for the ceiling the first of the cble route supports will be instlled t distnce of not less thn from the brrier mximum pssge dimensions in the ceiling will not exceed 0 in width with unlimited pssge length mximum pssge dimensions in the wll - s shown in the drwing below Cble fire dmpers sel pssges of cble routes through brriers, mintining their fire-resistnce clss Efficiency: From 1 sck bg (0kg) of dry mortr nd bout,kg of wter you will get fter pproprite preprtion bout liters of redy mortr Additionl informtion: Consumption: 1 sck bg (0kg)=~ litres 3 mortr (0.0m ) Wrehousing: Store in dry plce on wooden pllets Shelf use: pprox. 1 months Cble Try Fire Brrier Exmple of Assembly In the ceiling: unlimited length In the wll: 0 min 00 Cble Try In the ceiling : 0 In the wll: 000 min 0 min 0 dder min 0 Wire esh Cble Try
Systems of Mounting and Suspending Cable Runs
ounting nd Supporting Accessories - Rods, Chins, Wire Ropes, Anchors, Sleeves, Screws Systems of ounting nd Suspending Cle Runs Exmples of Accessories from the Section of ounting nd Supporting Accessories
More informationShip Cable Trays and Ladders. Ship Cable Trays System Height: H15 mm Width: mm 2 types of perforations
Ship Cble Trys nd dders Ship Cble Trys System Height: H mm : 7-0 mm 2 types of perfortions Ship Cble dders System Height: H nd H mm : 00-000 mm 2 types of rungs Exmples of Components of Cble dder System
More informationSupport System - Base Plate and Channel Connector
Support System - Bse Plte nd Chnnel Connector Bse Plte PVK 41 PVK PVK 5.0 0.33 6616 10 Strong 11x16 113 86 PVC 11x20 1 87 PVC PVC 5.0 0.56 6617 10 Strong MATERIA Steel, hot-dip glv. to P-E ISO 1461:2011
More informationJUMO Wtrans B Programmable Head Transmitter with Radio Transmission
Dt Sheet 707060 Seite 1/10 JUMO Wtrns B Progrmmble Hed Trnsmitter with Rdio Trnsmission Brief description The Wtrns B hed trnsmitter with wireless dt trnsmission is used in connection with Wtrns receiver
More informationRadiant systems 0801EN March 2016 Radiant plasterboard ceiling and/or floor system ISO /7
RADIANT CEILING SYSTEM Description is rdint ceiling/wll system relized with 600x1200 mm EPS200 preformed pnels coted with 0,3 mm luminium thermo-conductor sheets, where the plstic pipe with n externl Ø
More informationLarge Commercial Trunking
Lrge Commercil Trunking 3.2 CONTENTS Lrge Commercil SIGNO BK - PVC-U...................3.7 Trunking 110x70 to 220x70mm SIGNO BA - Aluminium............... 3.13 110x70 to 220x70mm SIGNO BS - Steel...................
More informationConnection Technology
Opticl fibre signl trnsmission RS422/HTL Opticl fibre trnsmitter nd receiver plus Cost Kostenvorteil dvntge compred gegenüber to conventionl herkömmlicher wiring Verkbelung over b 150 m length* Länge *
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
Incrementl encoders Solid shft with clmping or synchro flnge 0 5000 pulses per revolution ExEIL580 - solid shft Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Clmping or synchro flnge
More informationExtremely small "footprint" and the highest circuit density available AK550. Front Wire Entry
FIXED PRINTED CIRCUIT Tubulr Screw Clmp For use when stndrd size printed circuit terminl blocks re too lrge for vilble spce or where very smll circuit bord is utilized. Our new subminiture design offers
More informationArray chip resistors size ARC241/ARC242 ARV241/ARV242
Arry chip resistors FEATURES 4 0603 sized resistors in one 1206-sized pckge Reduced reel exchnge time Low ssembly costs Reduced PCB re Reduced size of finl equipment Higher component nd equipment relibility.
More informationNORTH STAR 2-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS
40684 Talbot Line, St. Thomas, Ont., N5P 3T2 Phone: (59) 637-7899 Toll Free: (800) 265-570 Fax: (59) 637-3403 Web Site: www.northstarwindows.com NORTH STR 2-PNEL PTIO DOOR SSEMBLY INSTRUCTIONS I:\PDssembly\2Panel\CovPg.doc
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution programmable (interpolated system)
Incrementl encoders Solid shft with clmping or synchro flnge 1 6556 pulses per revolution progrmmle (interpolted system) EIL580P - solid shft - OptoPulse Fetures Size mm Precise opticl sensing (interpolted)
More informationNP10 DIGITAL MULTIMETER Functions and features of the multimeter:
NP10 DIGITL MULTIMETER. unctions nd fetures of the multimeter: 1000 V CT III tri requencies from 10.00...10 M. Diode mesurement nd continuity testing. HOLD mesurement. Reltive mesurement. Duty cycle (%)
More informationSafety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.
Sfety Rely Unit The Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s Two-hnd ler. Simple
More informationTubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a
Grnd Slm Instlltion Instructions TACO Metls Inc., 98 NE 179th Street Mimi, Florid 33162 hndyhnk@tcomrine.com tcomrine.com This Box Contins: 1- Port side Grnd Slm 1- Strbord side Grnd Slm 4-5/16 x 1 stinless
More informationModWood New Zealand Technical and Installation Guide
PTO Pge 1 ModWood New Zelnd Technicl nd Instlltion Guide These guidelines should be red in conjunction with the New Zelnd Building Code (NZBC). Cluses tht pply to open, sltted decking nd blcony construction
More informationLEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation.
Section I - Instlltion Preprtion Prt Numer: 0854-53830 Section I - Instlltion Preprtion Kit Contents 3 Description Front spoiler Hrdwre g Instruction mnul Additionl Items Required For Instlltion Conflicts
More informationNOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
DESCRIPTION ISION DTE EDITED BY ECO# D UPDTED BOM ISIONS, REMOVED PGE 3 04/24/2014 TS 00649 E UPDTED BOM ISION 10/09/2014 00663 F UPDTED BOM ISIONS 11/24/2014 00673 1 2 3 1. SEE SHIPPING INSTRUCTIONS FOR
More information* TURNING SPACE ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * TURNING SPACE ** RAMP
* MXIMUM TURNING SPCE IS 2.0% IN ECH DIRECTION OF TRVEL. MINIMUM DIMENSIONS 5' x 5'. SEE NOTES. ** MXIMUM RMP CROSS IS 2.0%, RUNNING 5% - 7% (8.3% MXIMUM). SEE NOTES. "NON-WLKING" RE * TURNING SPCE 24"
More informationNOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
DESCRIPTION ISION DTE EDITED BY ECO# D UPDTED BOM ISIONS, REMOVED PGE 3 04/24/2014 TS 00649 E UPDTED BOM ISION 10/09/2014 00663 F UPDTED BOM ISIONS 11/24/2014 00673 1 3 2 4 5 1. SEE SHIPPING INSTRUCTIONS
More informationTP Series - Triple PV Top of Pole Solar LED Lighting System
TP Series - Triple PV Top of Pole Solr LED Lighting System Instlltion Mnul MKTG-TP34-02-EN-1113 Instlltion Mnul TP Series Importnt Notes nd Wrnings This instlltion nd instruction mnul provides instlltion
More informationIncremental encoders Solid shaft with square flange pulses per revolution
Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil Pulses per revolution up to 5000 High protection up to IP 67 High resistnce
More informationNOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
ISION DESCRIPTION DTE EDITED BY ECO# PRODUCTION RELESE, DERIVED FROM 56076 08//0 0066. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING ITEM NO PRT NUMBER DESCRIPTION QTY 550 HDS-LSX LIFT SUPERSTRUCTURE 5509
More informationMulti-Point Astragal Prehanger Installation Instructions
Multi-Point Astrgl Prehnger Instlltion Instructions 8817 West Mrket Street Colfx, NC 27235 800.334.2006 www.endurproducts.com Tools Required: Endur Router Templte (or equivlent) Router with 5/8" dimeter
More informationRoller chains. Roller chains
re chrcterised by n bove-verge service life due to excellent wer resistnce, high consistency, mtchless precision nd considerbly higher breking strength nd ftigue strength thn required by DIN/ ISO stndrd.
More informationCABLE MANAGEMENT. Parts List
CABLE MANAGEMENT Prts List CONTENTS PARTS LIST 1 Dt Trunking 03 1.1 COMPACT dt 140x50mm 04 1.2 PROFILA dt 180x65mm 07 1.3 Antimicroil Trunking - COMPACT Dt 11 1.4 Antimicroil Trunking - PROFILA Dt, 13
More informationFrom Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your
From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL
More informationNORTH STAR 4-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS
40684 Talbot Line, St. Thomas, Ont., N5P 3T Phone: (519) 637-7899 Toll Free: (800) 65-5701 Fax: (519) 637-3403 Web Site: www.northstarwindows.com NORTH STR 4-PNEL PTIO DOOR SSEMLY INSTRUCTIONS (JN/P-Dr04/4Panssy
More informationHow to remove BRNS/BRFS series from a PWB
Applictions mnul for BRNS/BRFS series How to remove BRNS/BRFS series from PWB VER1.0 Applictions Mnul BRNS/BRFS series Pge 1. Overview 1-1 1.1 Overview 1-1 2. Preprtion 2-1 2.1 2.2 2.3 Removl tool Adhesive
More informationHilti HIT-1 / HIT-1 CE Adhesive Anchor System
Concrete Hilti HIT-1 / HIT-1 CE Adhesive Anchor System Injection mortar system Benefits Hilti HIT-1 / HIT-1 CE 300 ml foil tube cartridge Mixer HIT PM HIT-V rods Dispenser: - chemical injection fastening
More informationINSTRUCTIONS INSTRUCCIONES CONSIGNES
PPLICTION: 2003-15 1500/2500/3500 HD SILVERDO/SIERR EXTENDED C/DOULE C/CREW C INCLUDING DIESEL EQUIPPED & 03-0 CLSSIC MODELS PRT # 5-5165, 5-5155 HDX RUNNING ORDS UTOMOTIVE PRODUCTS, INC. 1 INSTRUCTIONS
More informationINSTALLATION INSTRUCTIONS
INSTLLTION INSTRUCTIONS GEN X STEP BRS PPLICTION: 2014-2015 Chevrolet Silverado & GMC Sierra 1500 Double Cab 2014-2015 Chevrolet Silverado & GMC Sierra 1500 Crew Cab 2015+ Chevrolet Silverado & GMC Sierra
More informationSQN3... SQN4... Actuators. Building Technologies Division Infrastructure & Cities Sector
7 808 ctutors SQN3... SQN4... Electromotoric ctutors for use with ir dmpers nd control vlves of oil or gs urners of smll to medium cpcity. The SQN3... / SQN4... nd this Dt Sheet re intended for use y OEs
More informationJob Sheet 2. Variable Speed Drive Operation OBJECTIVE PROCEDURE. To install and operate a Variable Speed Drive.
Job Sheet 2 Vrible Speed Drive Opertion OBJECTIVE To instll nd operte Vrible Speed Drive. PROCEDURE Before proceeding with this job, complete the sfety check list in Appendix B. 1. On the Vrible Speed
More informationFrom Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your
From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL
More informationHarmer Roof Drainage The Modulock Raised Deck Support Ranges
Modulock Rised Deck Supports - Introduction Hrmer Roof Dringe The Modulock Rised Deck Support Rnges Fully engineered, verstile, rised deck product rnges, Modulock Pedestl nd Modulock Uni-Ring, re idel
More informationPB-735 HD DP. Industrial Line. Automatic punch and bind machine for books and calendars
PB-735 HD DP Automtic punch nd bind mchine for books nd clendrs A further step for the utomtion of double loop binding. A clever nd flexible mchine ble to punch nd bind in line up to 9/16. Using the best
More information001CK CK0012 FR-001CK0013 FR EN English
AUDIO ENTRY KIT FA00959EN 001DC00AC 001DC0EARY 7 10 001CS1PLCO INSTALLATION MANUAL 001CK0009 001CK001 FR001CK0013 FR EN English Generl Notes A Red the instructions crefully before beginning the instlltion
More informationGENERAL NOTES 1600 SYSTEM NOTES STRUCTURAL SEAL NOTES 1 - HANDLING, STORING AND PROTECTING ALUMINUM MATERIAL. 2 - GENERAL RULES
GENERL NOTES 162-971 1 OF 12 THESE INSTLLTION INSTRUCTIONS RE SUPPLEMENT TO THE PPROVED SHOP DRWINGS. USE IN CONJUNCTION WITH THOSE DRWINGS. 1 - HNDLING, STORING ND PROTECTING LUMINUM MTERIL. THE FOLLOWING
More informationMATKI ONE MOWP - WETROOM PANEL & BRACE BAR MOWV - WETROOM PANEL & CEILING BAR
MATKI ONE MOWP - WETROOM PANEL & BRACE BAR MOWV - WETROOM PANEL & CEILING BAR INSTALLATION PARTS LIST MOWV MOWP MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 3886 (AFTER SALES) FAX:0454
More informationProducts no longer available
echnicl dt sheet otry ctutor F2-P(-O) ultifunctionl rotry ctutor with emergency control for 2 nd 3 wy control bll vlve orque Nm Nominl voltge C/DC 2 V Control: odulting DC... V or vrible Position feedbck
More informationBCR16A, BCR16B, BCR16C, BCR16E
MITSUBISHI SEMICONDUCTOR TRIC, B, C : NON-INSULTED TYPE, E : INSULTED TYPE, GLSS PSSITION TYPE OUTLINE DRWING Dimensions in mm φ. MIN φ. MIN 4 MX φ8. MX 6. MX 9 MX φ. MX MX IT (RMS)... 6 DRM...4/ IFGT!,
More informationSPX Offers low cutting resistance for heavy machining & deep shoulder milling
Shell type ddition! 010. Updte B111G Indexble End ill for Deep Shoulder illing Offers low cutting resistnce for hevy mchining & deep shoulder milling y Wvy cutting edge geometry breker breks the chips
More informationControls. Solid-State Switching Devices. Reference Manual April Low-Voltage Controls and Distribution
Controls Solid-Stte Switching Devices Reference Mnul April 2009 Low-Voltge Controls nd Distribution Controls Solid-Stte Switching Devices 4 Introduction Solid-Stte Switching Devices 5 Generl dt Solid-Stte
More informationPilot Operated Servo Proportional DC Valve Series D*1FP
Ctlogue HY11-5/UK Chrcteristics he series of pilot operted servo proportionl vlves D*1F trnsfers the dvntges of the rker ptented Voice Coil Drive (VCD ) to lrger frme sizes nd thus high flow rtes. he high
More information''Violet'' drill series.
0. Updte B00G NEW SIZES VA-PDS VA-PDM VIOLET SERIES, HIGH PRECISION DRILLS VA-PDS VA-PDM VA-PDS-SUS VA-PDM-SUS A new stndrd for high precision drills! ''Violet'' drill series. Stble, long life Consistent
More informationWETROOM WALK-IN AWL1500 AWL1200 AWL900 AWC850
WETROOM WALK-IN AWL500 AWL00 AWL900 AWC850 INSTALLATION PARTS LIST MODEL: AWL500 AWL00 AWL 900 MODEL: AWL500 + AWC850 AWL00 + AWC850 AWL 900 + AWC850 03 AF /6 IMPORTANT Before disposing of crton nd/or
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS Multi Line 6 x8 255x193x203cm / 100 1 /2 x76 x80 Poly-Tex, Inc. PO Box 458 27725 Dnville Avenue Cstle Rock, MN 55010 We Site: www.poly-tex.com English - 69717 Hoy Greenhouse Service
More informationOn/off valves with spool position monitoring
On/off vlves with spool position monitoring RE 2483/2. Replces: 3.8 /3 Tble of contents Contents Pge Generl 2 Directionl set vlve type SED 3 Directionl set vlve type SEW 4 Directionl set vlve type SH,
More informationSynchronous Machine Parameter Measurement
Synchronous Mchine Prmeter Mesurement 1 Synchronous Mchine Prmeter Mesurement Introduction Wound field synchronous mchines re mostly used for power genertion but lso re well suited for motor pplictions
More informationUltimate Trilennium Astragal Prehanger Installation Instructions
Ultimte Trilennium Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Power Drill with 1" Drill Bit Tpe Mesure 1" Spde Bit Kit Includes: Full Astrgl Full
More informationOptions. Exposed Ends (EXP) Flush Ends (FL) Flush Unexposed Ends (FUE) Cabinet Systems Winter
Exposed Ends (EXP) Mtching specie veneer on 1/2" thick cbinet sides. Avilble in both Advntge nd Essence lines. Specify: L (Left), R (Right) or B (Both). 1/4" revel from edge of front frme to surfce of
More information388 SQUARE BASE TIME DELAY RELAYS
3 SQURE SE TIME DELY RELYS "ON" OR "OFF" DELY FUNCTIONS EXTERNL RESISTNCE DJUSTLE ± 3 % REPETILITY DPDT, 2 MP File No. E52 IEC STNDRDS -- ND -5- LOW VOLTGE DIRECTIVE IEC = INTERNTIONL ELECTROTECHNICL COMMISSION
More informationMFAH. Minimizes Burrs for High Quality Machining Results. Low Cutting Force Design
igh fficiency Milling Cutter for Finishing Aluminum MFA igh fficiency Milling Cutter for Finishing Aluminum MFA NW CG Imge Low Cutting Force Minimizes Burrs nd Chipping for igh Qulity Mchining Results
More informationNOTES 3D VIEW OF RAILING WITH TYPE 1 - PICKET INFILL PANEL. (42" Height shown, 54" Height Similar) TABLE 1 - RAILING MEMBERS ALTERNATIVE BOTTOM &
NOTES C:\d\projects\standards\structures\current\ready4release\20book\00862-of8.dgn 5/2/202 0:0:6 M 0.2 MEMBER s Joint/Splice Sleeves Intermediate & Int. & Connection Sleeve Handrail Joint/Splice Sleeves
More informationET 51 EXTERIOR ROOF DRIP SIDE FINISH MOULDING INSTALLATION
EXTERIOR ROOF DRIP SIDE FINISH MOULDING 51 INSTALLATION The procedure descried elow is for the LH side. Use the sme procedure for oth the RH nd LH sides, unless otherwise specified. 1. INSTALL ROOF SIDE
More informationTOOLS NEWS CRN ENDMILL FOR COPPER ELECTRODE
TOOLS NEWS CN ENDMILL FO COPPE ELECTODE 007. Updte B00G Series expnsion, Corner dius type now included! A gret vriety of products. Totl sizes of 0 in 7 series. Copper Electrode End Mill Series CN Series
More informationFitting & User Instructions
Issue 03 Alexnder Universl Furniture Risers Note: These frmes require the ddition of n ttchment. (See pges 4 - ) Bse Frme Mrk Bse Frme Mrk Fitting & User Instructions These instructions pply to the rising
More informationEnhanced performance compression solutions
Enhnced performnce compression solutions Fittings Introduction Pegler Yorkshire hs upgrded the Kuterlite K900 rnge to Kuterlite K900-PRO As prt of our continuous improvement nd development progrmme we
More informationSteel Stud Systems 1800 STUDCO. Studco Stud Fits positively into track. External Infill Framing Between concrete and steel structures
Steel Stud Systems Studco Stud Fits positively into trck Externl Infill Frming Between concrete nd steel structures 32 Service Holes Bell-mouthed service holes t 500mm centres do not require grommets for
More informationUNIFORM STANDARD DRAWINGS CLARK COUNTY AREA, NEVADA YEAR 2017 REVISIONS
UNIFORM STNDRD DRWINGS CLRK COUNTY RE, NEVD YER 2017 REVISIONS DWG NO. TITLE ND REVISIONS SUMMRY EFFECTIVE DTE 206.S1 Local Residential Urban rea Street Sections 1/1/2017 Drawing revised to prohibit the
More informationCanopy Bed Frame. Date: 8 Jun 15 www. potterybarn.com Page 1 of 12 Rev:
Cnopy Bed Frme Dte: 8 un 15 www. potterybrn.com Pge 1 of 12 Importnt Sfety Instructions: WARNIN: Do not llow children to climb on, pull on, or hng from cnopy. Filure to follow these instructions cn result
More informationPilot Operated Servo Proportional DC Valve Series D*1FP
Ctlogue HY11-5/UK Chrcteristics he series of pilot operted servo proportionl vlves D*1F trnsfers the dvntges of the rker ptented Voice Coil Drive (VCD ) to lrger frme sizes nd thus high flow rtes. he high
More informationFOR DEVICES SOLD PRIOR TO
23970734 98/9949 CS 98/9949 FOR DEVICES SOLD PRIOR TO 8-10-16 This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Instlltion Instructions
More informationPackage Code. K : SOP-8 Operating Junction Temperature Range C : -55 to 150 o C Handling Code TR : Tape & Reel. Handling Code Temperature Range
N-Chnnel Enhncement Mode MOSFET Fetures 30V/A, R DS(ON) = 16mW(mx.) @ V GS = V R DS(ON) = 22mW(mx.) @ V GS = 4.5V 0% UIS + R g Tested Relible nd Rugged Led Free nd Green Devices Avilble (RoHS Complint)
More informationDRAWING TABLE SYSTEM
DRWING TBLE SYSTEM DT31, DT61S, & CDTC71 MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED : : CRETED NME THIS DRWING IS THE SOLE PROPERTY OF DIVERSIFIED WOOD CRFTS. IT MY NOT BE LTERED OR CHNGED WITHOUT
More informationWARNING: If decorative shrouds are being used with Temp/Guard Chimney, Reference the Temp/Guard Addendum L2372.
TEMP/GURD INSTLLTION ND MINTENNCE INSTRUCTIONS 2100 TEMP/GURD CHIMNEY SIZES 6-7 - 8-10 - 12 This symbol on the nameplate means this product is listed by Underwriters Laboratories Inc. Listing No. MH 8251
More informationAL Series. Tropical Lighting System. Installation Manual
AL Series Tropicl Lighting System Instlltion Mnul Importnt Notes nd Wrnings This instlltion nd instruction mnul provides instlltion instructions for the Sol Tropicl Lighting System (AL) Series solr LED
More informationDevice installation. AFR 1xx - Feature Description of the Smart Load. AFR1xx 145 % 200 %
KM systems, s.r.o. Dr. M. Horákové 559, 460 06 Lierec 7, Czech Repulic tel. +420 485 130 314, fx +420 482 736 896 emil : km@km.cz, url : www.km.cz sturtion of the mgnetic circuit of the VT. This often
More informationPilot Operated Servo Proportional DC Valve Series D*1FP
Ctlogue HY11-5/UK Chrcteristics he series of pilot operted servo proportionl vlves D*1F trnsfers the dvntges of the rker ptented Voice Coil Drive (VCD ) to lrger frme sizes nd thus high flow rtes. he high
More informationCompared to generators DC MOTORS. Back e.m.f. Back e.m.f. Example. Example. The construction of a d.c. motor is the same as a d.c. generator.
Compred to genertors DC MOTORS Prepred by Engr. JP Timol Reference: Electricl nd Electronic Principles nd Technology The construction of d.c. motor is the sme s d.c. genertor. the generted e.m.f. is less
More informationTUR DOORS SHOWER DOORS
TUR DOORS SHOWER DOORS INSTALLATION INSTRUCTIONS TUB DOORS: LBTDB6062 SHOWER DOORS: LBSDB4876 LBSDB6076 VERSION: 3.2 PREPARATION FOR INSTALLATION TUB DOORS SHOWER DOORS PREPARATION FOR INSTALLATION READ
More informationSynchronous Machine Parameter Measurement
Synchronous Mchine Prmeter Mesurement 1 Synchronous Mchine Prmeter Mesurement Introduction Wound field synchronous mchines re mostly used for power genertion but lso re well suited for motor pplictions
More informationSAMPLING S Y S T E M S. w w w. s a m p l i n g. c o m. Label Solutions. Labels for Production and Quality Control use
w w w. s m p l i n g. c o m Lbel Solutions 2017 Lbels for Production nd use SYSTEMS Which type lbel is right for me? Smpling Systems fer two types stndrd lbel bcking: Ultr Ahesive Lbels PhrmLbels 1. Ultr
More informationUPTOWN CANOPY FRAME T/F/Q
UPTOWN CANOPY FRAM T/F/Q Dte: 30 Mr 16 www.pbteen.com Pge 1 of 12 mportnt Sfety nstructions: Plese red ll instructions crefully before ssembling. For your sfety, ssembly by two or more dults is strongly
More informationMSRS90. Hi efficiency Notched and No-hand insert for MSRS90
MGCO MR90 Multiple Cutter i efficiency Notched nd Nohnd insert for MR90 1Notched insert reduces cutting force reduction t the first pss tle mchining without chtter 2mooth chip evcution Prevents frcture
More information* * 33/3549A CS 33/3549A. 2-Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions
*23970726* 23970726 33/3549A CS 33/3549A Instlltion Instructions This instruction covers new instlltion of the 33/3549A conceled verticl device for luminum nd hollow metl doors. RF Also covered is the
More informationCarbon Composition Resistors
Dimensions Cron Composition Resistors Rtings nd Dimensions Type L Specifiction Limit nd Performnce d D Derting Curve 8 6 4 (/, w) Test procedures, sequence of test, etc., refer to MIL-STD D nd JIS-C-5.
More informationConditions. Unit IT (RMS) ITSM. Commercial frequency, sine full wave 360 conduction, Tc=86 C 60Hz sinewave 1 full cycle, peak value, non-repetitive
OUTLINE DRWING MX Dimensions in mm φ.±.1 TYPE NME CLSS 8 MX 1.±.1.8.8.±..7± MX 1 MIN.. MIN. MX 1 Measurement point of case temperature IT (RMS)... DRM.../6 IFGT!, IT!, IT #... m (1m) 6 ±.1 MX 1T1 TERMINL
More informationUltrasonic Level Measurement DU 60 Z and DU 61 Z Sensors
Technicl Informtion TI 9F//en Ultrsonic Level Mesurement DU 6 Z nd DU 6 Z Sensors Modulr design, corrosion-resistnt Approved for explosion hzrdous res DU 6 Z Mesuring rnge pprox. m DU 6 Z Mesuring rnge
More informationIonizer. Series IZS31. RoHS
Ionizer Series IZS3 3 types of the sensors re vilble. Autoblnce sensor [High-precision type] Adjusts ion blnce ner the workpiece to reduce ny disturbnce interference! Autoblnce sensor [Body-mounting type]
More informationRegular InGaAs Photodiodes IG17-Series
Description The IG7series is pnchromtic PIN photodiode with nominl wvelength cutoff t.7 µm. This series hs been designed for demnding spectroscopic nd rdiometric pplictions. It offers excellent shunt resistnce
More information4. Current Standard Plates including Transmittal Letters are available on the web at:
MINNESOT DEPRTMENT OF TRNSPORTTION DEVELOPED BY: Design Standards ISSUED BY: Office of Program Management & Technical Support, Design Support Section TRNSMITTL LETTER (-03) MNUL: Standard Plates DTED:
More informationRectangular type APS-10 to 15 Series
Rectngulr type APS- to 15 Series From n ultr-thin design to n operting distnce of 15 mm, wide-rnging rectngulr types re vilble to meet diversified requirements. Types output type/dc 3-wire type Shpe Operting
More informationUnit IT (RMS) ITSM. Conditions. Commercial frequency, sine full wave 360 conduction, Tc=98 C 60Hz sinewave 1 full cycle, peak value, non-repetitive
OUTLINE DRWING Dimensions in mm MX TYPE NME CLSS.±.. MIN. MX. MX.. φ.6±. 1.. 1.....6. IT (RMS)... DRM.../ IFGT!, IT!, IT #... m (m) 1 1 1T1 TERMINL T TERMINL GTE TERMINL T TERMINL TO- Measurement point
More informationEY-AM 300: novanet BACnet application master, modunet300
Product dt sheet 96.010 EY-AM 300: novnet BACnet ppliction mster, modunet300 How energy efficiency is improved Open communiction for interoperle opertion of the entire optimised plnt. Fetures Prt of the
More informationNOTE THAT THE HANDLE IS BELOW THE LOCK BASE
NOTE THT THE POSITION OF STOP IS LOCTED USING THE SINGLE HOLE S PLCEMENT GUIDE. NOTE THT THE HNDLE IS ELOW THE LOCK SE DETIL G SCLE.5. OF CHNGE DTE SIGN RELESED FOR PRODUCTION // RQ G SEE SHEET 3 FOR P/N
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnicl dt sheet SF24A-MF Prmeterisle spring-return ctutor with emergency control function for djusting dmpers in technicl uilding instlltions Air dmper size up to pprox. 4 m² Nominl torque 20 Nm Nominl
More information! MINIMAL DIMENSIONS! MINIMAL MAINTENANCE! RELIABILITY! MARKET ORIENTATION
- MEDIUM VOLTAGE APPARATUS, Inc. MEDIUM VOLTAGE VACUUM CIRCUIT BREAKERS Series FOR INDOOR INSTALLATION! TRADITION! OWN DEVELOPMENT! QUALITY MANAGEMENT! ENVIRONMENT PROTECTION! MINIMAL DIMENSIONS! MINIMAL
More informationNew Milling Series. Metric type is added for all line up!! Tough edge GT chip breaker MSE45-SF MTE90-SF. Wiper insert is added for MSE45-SF type.
New Milling eries Metric type is dded for ll line up!! Octgonl MOF mill MOF ough edge G chip reker sy edge djustment M45F qure Insert~90 houlders New MO90 Wiper insert is dded for M45F type. sy edge djustment
More informationPilot Operated Proportional DC Valve Series D*1FB. Pilot Operated Proportional DC Valve Series D*1FB. D*1FBR and D*1FBZ
Ctlogue HY11-35/UK Chrcteristics Series D*1F Ctlogue HY11-35/UK Regenertive nd Hyrid Function Series D*1F he pilot operted proportionl directionl vlves D*1F re ville in 4 sizes: D31F - NG1 (CEO 5) D41F
More informationFASTENERS FOR SPECIAL MATERIALS
FSTENERS FOR SPEIL MTERILS Wherever you are... we have the solution! FSTENERS FOR SPEIL MTERILS INTRODUTION The introduction of new materials and their successful use by designers are usually dependant
More informationInstallation and Assembly: Projector Ceiling/Wall Mount
Installation and ssembly: Projector Ceiling/Wall Mount Models:PRG-EX, PRG-EX-S, PRG-EX-W PRG-EXB, PRG-EXB-S, PRG-EXB-W PRG-EXC, PRG-EXC-S, PRG-EXC-W R This product is intended for use with UL Listed products
More informationLeveling and Support. Support from UNITED is on the Level
Leveling and Support Support from UNITED is on the Level FST-LOK LMP ROUND BR Pg H2 SPRING JK LOKS Pg H10 STEEL SOKET LEVELING PDS Pg H12 USHIONED UNI-PDS Pg H17 FIXTURE JKS Pg H18 JIG LEVELING FEET &
More informationDIN ANSI Shark Line Material specific application taps. New products 2017
DIN ANSI Shrk Line Mteril specific ppliction tps New products 2017 SHARK LINE SHARK INTRODUCTION Dormer brnd mteril specific ppliction-bsed rnges DIN ANSI Shrk Tps fer high performnce nd process security.
More informationAmphenol MS3450 (Matrix ) Series MIL-DTL-5015
mphenol MS3450 (Matrix ) Series MIL-DTL-5015 HIGH-PERFORMNCE LTERNTIVE TO OLDER MIL-DTL-5015 SOLDER TYPES The MIL-DTL-5015 Rear-Release Threaded MS3450 Matrix series uses rear-release crimp contacts with
More informationFeatures. Ordering and Marking Information. P-Channel Enhancement Mode MOSFET -30V/-7A, R DS(ON) = V GS. =-10V = 60mW(max.
P-Chnnel Enhncement Mode MOSFET Fetures -3V/-7A, = 38mW(mx.) @ V GS =-V = 6mW(mx.) @ V GS =-4.5V % UIS + R g Tested Relible nd Rugged Led Free nd Green Devices Avilble (RoHS Complint) HBM ESD protection
More informationInnovative plate solutions for flexographic printing. nyloflex printing plates
Innovtive plte solutions for flexogrphic printing nyloflex printing pltes nyloflex Printing Pltes Unique nd comprehensive expertise in flexogrphic printing Printing pltes from Flint Group to meet every
More informationMAXIMUM FLOWS IN FUZZY NETWORKS WITH FUNNEL-SHAPED NODES
MAXIMUM FLOWS IN FUZZY NETWORKS WITH FUNNEL-SHAPED NODES Romn V. Tyshchuk Informtion Systems Deprtment, AMI corportion, Donetsk, Ukrine E-mil: rt_science@hotmil.com 1 INTRODUCTION During the considertion
More informationBCR5KM. APPLICATION Control of heater such as electric rice cooker, electric pot. BCR5KM OUTLINE DRAWING Dimensions in mm
Refer to the page 6 as to the product guaranteed maximum junction temperature C OUTLINE DRWING Dimensions in mm ±..8 ±. 1 ±. ±. 6. ±. φ. ±. 1 ±..6 ±. 1.1 ±. 1.1 ±. E. ±.. ±.1. ±.. ±.1 IT (RMS)... DRM...
More information