Incremental encoders Solid shaft with square flange pulses per revolution
|
|
|
- Ashley Lee
- 5 years ago
- Views:
Transcription
1 Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil Pulses per revolution up to 5000 High protection up to IP 67 High resistnce to shock nd virtions EIL580-SQ with squre flnge Technicl dt - electricl rtings Voltge supply 5 VDC ±5 % VDC VDC Reverse polrity protection Yes Short-circuit proof Yes (HTL) Yes (TTL, mx. 1 s nd 1 signl) Consumption w/o lod 70 m Pulses per revolution Phse shift 90 ±10 Duty cycle % Reference signl Zero pulse, width 90 ±10 % Sensing method Opticl Output frequency 300 khz (TTL) 160 khz (HTL) Output signls +, B+, R+, -, B-, R- Output stges TTL/RS422 HTL/push-pull Interference immunity DIN EN Emitted interference DIN EN pprovl UL 508 / CS 22.2 Technicl dt - mechnicl design Size (flnge) Shft type dmitted shft lod Flnge Protection DIN EN x 2.5" (63.5 x 63.5 mm) ø10 x 20 mm, solid shft with flt ø3/8" x 4/5" (ø9.525 x mm), solid shft with flt 40 N xil 80 N rdil Squre flnge 2.5" (63.5 mm) IP 65 (without shft sel), IP 67 (with shft sel) Operting speed 6000 rpm (+20 C, IP 67) rpm (+20 C, IP 65) Strting torque 0.0 Nm (+20 C, IP 65) 0.02 Nm (+20 C, IP 67) Mterils Housing: luminium die-cst Flnge: luminium Solid shft: stinless steel Operting temperture C Reltive humidity 90 % non-condensing Resistnce DIN EN Virtion 30 g, Hz DIN EN Shock 300 g, 6 ms Connection Flnge connector M12, 8-pin Flnge Cle Weight pprox. 370 g 1
2 Prt numer EIL580-S Q... Pulse numer - see tle E H N Q Voltge supply / output stges 5 VDC, TTL/RS422, 6 chnnel VDC, TTL/RS422, 6 chnnel VDC, HTL/push-pull, 6 chnnel VDC, HTL/push-pull, 6 chnnel R L F B T U D P Q Connection Cle rdil, 1 m Cle rdil, 2 m Flnge, rdil, mle, CCW Flnge connector M12, 8-pin, rdil, mle, CCW Cle xil, 1 m Cle xil, 2 m Flnge, xil, mle, CCW Flnge connector M12, 8-pin, xil, mle, CCW Cle tngentil, 1 m Cle tngentil, 2 m Protection 5 IP 65 7 IP 67 Specifiction solid shft U3 ø3/8 x 4/5 inch (ø9.525 x mm), with flt 10 ø10 x 20 mm, with flt Q Flnge Squre flnge Pulse numer
3 ccessories Connectors nd cles Connection cle 2 m shielded with femle connector M12, 8-pin, stright (ESG 34FH0200G) Connection cle 5 m shielded with femle connector M12, 8-pin, stright (ESG 34FH0500G) Connection cle 10 m shielded with femle connector M12, 8-pin, stright (ESG 34FH1000G) Connection cle 2 m shielded with femle connector M12, 8-pin, ngled (ESW 33FH0200G) Connection cle 5 m shielded with femle connector M12, 8-pin, ngled (ESW 33FH0500G) Connection cle 10 m shielded with femle connector M12, 8-pin, ngled (ESW 33FH1000G) Connector M23, 12-pin Connection cle 1 m shielded with femle Connection cle 2 m shielded with femle Connection cle 5 m shielded with femle Connection cle 10 m shielded with femle Mounting ccessories Coupling CPS25 L=19 d1=04/d2= Coupling CPS25 L=19 d1=07/d2= Coupling CPS25 L=19 d1=08/d2= Coupling CPS25 L=19 d1=09/d2= Coupling CPS25 L=19 d1=10/d2= Coupling CPS25 L=19 d1=10/d2= Coupling CPS25 L=19 d1=10/d2= Coupling CPS25 L=19 d1=10/d2= Spring wsher coupling D1=6 / D2=10 (Z 121. C01) Spring wsher coupling D1=10 / D2=10 (Z 121.C03) Spring wsher coupling D1=10 / D2=16 (Z 121.C04) Spring wsher coupling D1=10 / D2=14 (Z 121.C06) Spring wsher coupling D1=10 / D2=12 (Z 121.C07) Bellows coupling luminium/stinless steel D1=06 / D2= Doule loops coupling D1=10 / D2=10 3
4 Output signls Trigger level Outputs TTL/RS422 Output level High 2.5 V Output level Low 0.5 V Lod 20 m Terminl ssignment Flnge / cle Pin Core color ssignment 1 pink B- 2 3 lue R+ 4 red R- 5 green + 6 yellow grey B white GND rown UB Screen: Connected to housing Cle dt: PVC, [4x2x0.14 mm 2 ], ending rdius >32.5 mm, outer dimeter 6.5 mm Outputs Output level High Output level Low Lod HTL/Push-pull UB -3 V 1.5 V 20 m Flnge connector M12, 8-pin Pin ssignment 1 GND 2 UB B+ 6 B- 7 R+ 8 R
5 Dimensions Squre flnge, flnge connector M23, rdil ø M23x1 Squre flnge, flnge connector M12, rdil ø Squre flnge, cle rdil ø (6.48) 11.8 M12x
6 Dimensions Squre flnge, flnge connector M23, xil ø0.03 M23x1 Squre flnge, flnge connector M12, xil 22 ~11 ø0.03 M12x1 Squre flnge, cle xil ø0.03 ~23 ~11 6
7 Dimensions Squre flnge, cle tngentil ø9.525 ø ø
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution programmable (interpolated system)
Incrementl encoders Solid shft with clmping or synchro flnge 1 6556 pulses per revolution progrmmle (interpolted system) EIL580P - solid shft - OptoPulse Fetures Size mm Precise opticl sensing (interpolted)
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution
Incrementl encoders Solid shft with clmping or synchro flnge 0 5000 pulses per revolution ExEIL580 - solid shft Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Clmping or synchro flnge
Incremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,
Incremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable
Incremental Encoder Model: FOI58
Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85
Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT
Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional
Absolute encoders - SSI
with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics
Incremental Encoder for special applications
Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance
Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,
POSIROT. PMIS4, PMIR5 Magnetic incremental encoder. Magnetic wheels for rotative applications PMIS4, PMIR5
Variant e: PMIS4, PMIR 5 POSIROT Magnetic incremental encoder Magnetic wheels for rotative applications All metal housing Protection class IP67 Excellent protection of the active measurement area Highest
Incremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
Absolute encoders - analog Blind hollow shaft ø12 mm Magnetic single- or multiturn encoders 12 bit ST / 16 bit MT
Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Features Encoder single- or multiturn / analog Magnetic sensing Resolution: singleturn bit,
Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.
Sfety Rely Unit The Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s Two-hnd ler. Simple
IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.
IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration
Connection Technology
Opticl fibre signl trnsmission RS422/HTL Opticl fibre trnsmitter nd receiver plus Cost Kostenvorteil dvntge compred gegenüber to conventionl herkömmlicher wiring Verkbelung over b 150 m length* Länge *
Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:
Encoder - Absolut 2RMHF-SSI
Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical
DG 60 L Incremental Encoder
Incremental Encoder Features Incremental encoder with 60 mm outer diameter ugged die-cast aluminum housing Quadrature output with reference marker, complementary output signals Protection to IP 67 Square
Cable transducer Analog output / redundant Measuring length absolute up to 5 m
Features Magnetic sensing method Resolution: 12 bit Interface analog 0...10 V / 0.. V /...20 ma Measuring length up to m Removable stickers for water outlet Teach inputs Extremely light thanks to housing
Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85
![Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85](/thumbs/80/82459193.jpg "Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85")
Parallel Singleturn bsolute Value Encoder Features 13-bit Singleturn High code change frequency Inputs for: - Selection of counting direction - Buffer memory (LTCH) - Multiplex operation (TRISTTE) Short-circuit
Absolute encoders - SSI EX approval ATEX EEx d IIC T6 Optical single and multiturn encoders 14 bit ST / 12 bit MT
Features Encoder single- or multiturn / SSI / ATEX Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping flange with shaft ø10 mm Explosion protection per EEx d IIC T6 Area of application:
Technical data. General specifications. Measurement range min max. 360
Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
Material: Weight: Shaft Loads:
Absolute Encoder Type SCA36NA-SSI Absolute Encoder - Ø 36 mm Shaft - Ø 6 mm Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction Enclosure Rating
Acceleration sensors With relay output for limit monitoring Analog / CANopen
Features Acceleration sensor / analog / CANopen Up to two relay outputs for limit monitoring 3 axes detection, MEMS based Measuring range ±2 g Connection: connector M12, 12-pin Offshore capability (plastic
DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
Express Delivery. Axial. Connection
HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN
Online data sheet. DBS60E-TECJD1024 DBS60 Core INCREMENTAL ENCODERS
Online data sheet DS60ETECJD1024 DS60 Core C D E F H I J K L M N O P Q R S T Ordering information Type Part no. DS60ETECJD1024 DS60ETECJD1024 Other models and accessories www.sick.com/ds60_core Illustration
300 ma max. 2 mm ,8 mm. ±1 mm. ±1 Digit. A, A, B, B / signal Z, Z (optional) / status signal ERR (optional) Zinc die casting IP67
Variant e: PMIS4, PMIR 7, PM IR7N POSIROT Magnetic incremental encoder Magnetic wheels for rotative applications All metal housing Protection class IP67 Excellent protection of the active measurement area
Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
Technical data. General specifications V DC Power consumption P 0. 1 W Time delay before availability t v
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
TECHNICAL DATASHEET Incremental Encoder RI 30
Miniature encoder for industrial use Low current consumption High noise interference immunity Cable lengths of up to 00 m Suitable for high pulse frequencies High protection class Applications: CNC machines,
Technical data. General specifications V DC No-load supply current I 0. typ. 50 ma Power consumption P 0
Model Number SYNCHRON SERIELLES INTERFACE Cable pull rotary encoder with SSI interface Features Solid yet lightweight plastic construction Compact, slim design (the shaft of the mounted rotary encoder
Standard Industrial Types RI 58-O / RI 58-T
Synchro flange Universal industry standard encoder Up to 40 000 steps with 10 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable
NOVOHALL Rotary Sensor non-contacting. Series RSC-2800
NOVOHALL Rotary Sensor non-contacting Series RSC-2800 Special features Non-contacting, magnetic technology Measuring range up to 360 Available with push-on coupling or marked shaft Simple mounting Protection
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional
Standard Industrial types RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 analog
NOVOHALL Rotary Sensor non-contacting Series RSC2800 analog The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors,
PRELIMINARY RE36 SERIES MAGNETIC ENCODER
RE6 SERIES MGNETIC EODER The RE6 is a high-speed rotary magnetic encoder designed for use in harsh environments. The traditional design enables easy integration on existing machines. magnet is mounted
Universal Radius Mounting Option. Fixed Radius Mounting Option
F e a t u r e s Factory Set for Same Day Dispatch (1 to 65,536 Pulses Per Rev) 100 Degrees Centegrate cabability as standard Opto-ASIC Technology Any bore - up to 15mm bore (Metric) or (Imperial) The 60HA
Magnetic absolute single-turn encoder BMSH MAGRES parallel
Magnetic absolute single-turn encoder BMSH MAGRES parallel features robust single-turn encoder up to 9 bit parallel interface miniature housing zero-point programmable general data voltage supply 5 VDC
Multiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Data transfer up to 2 MBaud Optically isolated RS 422 interface Recessed
Incremental hollow shaft encoder BRIH EcoMag
Incremental hollow shaft encoder BRIH EcoMag features miniaturized hollow shaft encoder with wide pulse range radial cable connection or connector end shaft mounting up to mm general data voltage supply
Encoder WDG 100H.
Encoder WDG 00H www.wachendorffautomation.com/wdg00h Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
Encoder WDGI 58E.
Encoder WDGI E www.wachendorffautomation.com/wdgie Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
Encoder WDGI 58H.
Encoder WDGI H www.wachendorffautomation.com/wdgih Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
Online data sheet DFS60B-S4PA00S74 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60B-S4PA00S74 DFS60 A B C D E F Illustration may differ Ordering information Type Part no. DFS60B-S4PA00S74 1081183 Other models and accessories www.sick.com/dfs60 H I J K L M N O
Encoder WDG 58H.
Encoder WDG H www.wachendorffautomation.com/wdgh Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
Reversible and Proportional Electric Actuators
Reversible nd Proportionl Electric s The MP s re used for two-position, floting, nd proportionl control of dmpers, vlves, nd progrm switches in heting, ventiltion, nd ir conditioning pplictions or similr
ITT Cannon Combination D-Sub Connectors
PPLICTIONS Video Coaxial Transmission (75Ω) RF and Telecom Transmission (50Ω) Power Interconnects (Up to 40) ITT Cannon Combination D-Sub Connectors RECTNGULR CONNECTOR SUITED FOR NETWORK ND COMMUNICTION
L25 Incremental Optical Encoder
L25 Incremental Optical Encoder The L25 is a lighter duty version of the H25. With low starting torque, a 1/4" diameter stainless steel shaft and a drawn aluminum cover. In most intances, the L25 encoder
RoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
Standard Industrial types RI 36-H
Miniature industry encoder for high number of pulses Short mounting length Easy mounting procedure Applications: motors, machine tools, robots, automated SMD equipment NUMBER OF PULSES 5 / 0 / 0 / 5 /
Magnetic Encoder MEM 22
Description The MEM 22 is a magnetic incremental encoder. He is a reliable low cost hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder MEM22 is designed
JUMO Wtrans B Programmable Head Transmitter with Radio Transmission
Dt Sheet 707060 Seite 1/10 JUMO Wtrns B Progrmmble Hed Trnsmitter with Rdio Trnsmission Brief description The Wtrns B hed trnsmitter with wireless dt trnsmission is used in connection with Wtrns receiver
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10
Model Number SYNCHRON SERIELLES INTERFACE Features Recessed hollow shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset
Multiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Release date: 2016-07-12 16:14 Date of issue: 2016-07-12 t4917_eng.xml Model Number Features Industrial standard housing Ø58 mm 0 Bit multiturn Data
Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )
PRAS1 Magnetic Angle Sensor with Analog Output Magnetic angle 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69K Analog output Stainless steel housing Non-contact with external
Encoder WDG 50B.
Encoder WDG 0B www.wachendorffautomation.com/wdg0b Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
OPTICAL ISOLATOR ELECTRONIC MODULE
OPTICL ISOLTOR ELECTRONIC MODULE ELECTRICL SPECIFICTIONS POWER: The optical isolator can accommodate standard operating voltages from 5 to 28 VDC. It should never be connected directly to C power mains.
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10
Model Number SYNCHRON SERIELLES INTERFACE Features Solid shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset function
MODEL INDUCTOSYN TO ABSOLUTE ENCODER CONVERTER with SSI INTERFACE *** APPLICATIONS ***
MODEL 79054 INDUCTOSYN TO BSOLUTE ENCODER CONVERTER with SSI INTERFCE *** PPLICTIONS *** Ideal For Closed Loop Positioning Systems Machine Tools Servo Motor Control PLC Positioning Control Index/Rotary
Technical data. Functional safety related parameters MTTF d Mission Time (T M ) max. 140 ma Power consumption P 0. Voltage drop
Release date: 2014-04-14 15: Date of issue: 2016-05-0 t102_eng.xml Model Number Features Industrial standard housing Ø58 mm 1 Bit singleturn Output code: gray and binary Short-circuit proof push-pull output
Absolute Encoders Multiturn
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just
MHAD 50 - HDmag. Features
Magnetic sensing, hollow shaft 30 mm MHAD 50 with cable Features Absolute encoder with magnetic sensing and without bearings Absolute resolution max. 16 bit singleturn Additional incremental signals Robust
ENCODER. Analog Multiturn Encoder. Serie 8.M5861. Key-Features:
ENCODER Multiturn Encoder Serie 8.M5861 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connection... Dimensions...5 - Shaft with max. 10 mm diameter - 0...10 V,...20 ma, 0...5 V analog
847H. Description. Features. Specifications
847H Bulletin 847H High Performance Industrial Incremental Encoders provide code disk resolutions of up to 65536 pulses per revolution at a signal frequency response of 820 khz. The 847H can provide 65536
V DC 4 POLE RELAY RC V DC 4 POLE RELAY (RC) V AC 4 POLE RELAY
DT SHEET Plug-in power relays Order code Manufacturer code Description -.. V DC POLE RELY RC -.. V DC POLE RELY (RC) -.. V C POLE RELY Plug-in power relays The enclosed information is believed to be correct,
Incremental Shaft Encoders Industrial types
Synchro flange! Universal industry standard encoder! Up to 40,000 steps with 10,000 pulses! High signal accuracy! Protection class up to IP 67! Operating temperature up to 100 C (RI 58-T)! Flexible due
Online data sheet AFS60E-S1AA AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS C D E F Ordering information Type Part no. FS0E-S0009 0 Other models and accessories www.sick.com/fs_fm0_ssi
Absolute multi-turn hollow shaft encoder BOMH Dignalizer SSI
features high resolution multi-turn encoder up to - 8 bit single-turn - 8 bit multi-turn interface programmable permanent self-test reference point programmable general data voltage supply 5 VDC (05C)
Gurley Series 835S Rotary Incremental Encoders. High Performance - Industrial Endurance. The following features are common among both models:
Gurley Series 83S Rotary Incremental Encoders Motion Type: Rotary Usage Grade: Industrial Output: Incremental Max Resolution: 360,000 counts/rev.* 900,000 counts/rev.** *Internal electronics **External
Rotary Measurement Technology Absolute Encoders, Multiturn
Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )
PRAS1 Magnetic Angle Sensor with Analog Output Magnetic angle 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69K Analog output Stainless steel housing Non-contact with external
Rotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
Absolute Encoders - Singleturn
The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional
TECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
PMIS2 POSIMAG Magnetoresistive Position Sensor with Incremental Output
PMIS2 POSIMAG with Incremental Compact Sensor for Industrial Applications Sensor PMIS2 Non contact Robust Fast Protection class IP67 Incremental encoder output Reference pulse Specifications Incremental
Online data sheet DFS60A-TEPZ00S09 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60A-TEPZ00S09 DFS60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Special device Specialty Ordering information Other models and accessories
ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps
Mounting M12 x 1 EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles
PRDS1 Magnetic Angle Encoder with Incremental Output Magnetic angle encoder 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69 Incremental encoder output Stainless steel housing
PRELIMINARY 9-SPOT SPECIFICATION. RoHS COMPLIANT RGB COLOR CHANGING IP67 IK07
SPECIFICTION Line voltage LED, High Performance Facade and Flood Lighting Ideal for lighting facades, structures, bridges Industry leading center beam candlepower with optics Integral power (line voltage
NOVOTURN Multiturn Sensor non-contacting. Series RSM-2800
NOVOTURN Multiturn Sensor non-contacting Series RSM-2800 Special features Non-contacting, magnetic Long life Electrical range 720 up to 5760 in 360 -steps available (2 to 16 turns) True-Power-On System:
Incremental & absolute rotary encoders, heavy-duty, bearingless and feedback. Smart encoders & actuators
Inrementl & solute rotry enoers, hevy-uty, eringless n feek 2013 Smrt enoers & tutors ROTAPULS ROTACOD eringless enoers Pge Housing ø (mm) Shft mx. ø (mm) Shft rottionl spee mx. (rpm) onnetor le Connetion
ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL
Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull ΠShort circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096
Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI
Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI features robust multi-turn encoder up to - 2 bit single-turn resolution - 3 bit multi-turn resolution miniature housing zero point programmable
Absolute Encoders Singleturn
The absolute singleturn encoders Sendix 5853 SIL and 5873 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 6800-5- or PLe to DIN EN ISO 3849. The extra
XXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
388 SQUARE BASE TIME DELAY RELAYS
3 SQURE SE TIME DELY RELYS "ON" OR "OFF" DELY FUNCTIONS EXTERNL RESISTNCE DJUSTLE ± 3 % REPETILITY DPDT, 2 MP File No. E52 IEC STNDRDS -- ND -5- LOW VOLTGE DIRECTIVE IEC = INTERNTIONL ELECTROTECHNICL COMMISSION
Oil & Gas / Heavy Industry Type 2REX-A-NA-SSI
Oil & Gas / Heavy Industry Type 2REX-A-NA-SSI EN 60079 Electrical Specifications Encoder Type: Singleturn Resolution: Number of Revolutions: Supply Voltage: Typical Current Consumption: Accuracy: ± 0,35ᴼ
Absolute Encoders Multiturn
Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN
Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e
Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is
POSICHRON position sensor in stick design. Protection class. Voltage: V, 3 wire Current: ma, 3 wire
POSICHRON Position Sensor Stick Design with Analog Specifications POSICHRON position sensor in stick design Protection class IP67 Measurement range 0... 100 up to 0... 5750 mm Absolute position measurement
H40 Absolute Shock Proof Encoder
H40 bsolute Shock Proof Encoder uilt to the same rugged standards as the H40 Incremental Heavy Duty encoder, this unit features an absolute encoder output up to 13 bits of resolution. Designed to take
General technical data Incremental encoders
General technical data Incremental encoders Wachendorff Automation GmbH & Co. KG Industriestraße 7 D-65366 Geisenheim Tel.: +49 (0) 67 22/99 65-25 Fax: +49 (0) 67 22/99 65-70 E-Mail: wdg@wachendorff.de
Extended InGaAs Photodiodes IG26-Series
Description The IG26series is pnchromtic PIN photodiode with nominl wvelength cutoff t 2.6 µm. This series hs been designed for demnding spectroscopic nd rdiometric pplictions. It offers excellent shunt
ENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features:
ENCODER Multiturn Encoder Serie 8.M366/M368 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connections...5 Dimensions...6 - Shaft with max. 0 mm diameter - 0...5/0V, 4...20 ma analog