Coating LJ403A. Additional Series. Metric End Mill Series. Dependable Quality and Performance. New PVD coating. high efficiency machining
|
|
- Brett Sanders
- 5 years ago
- Views:
Transcription
1 LJ0A New PVD coating Coating Achieving high speed, high efficiency machining and long tool life Additional Series Dependable Quality and Performance Metric End Mill Series
2 Features of A wide variety of items available MSSB Cutting edge length =.D, ball nose 0.~-7 items P. MSXLB Long neck, ball nose 0.~- items P. MSMTB Tered ball nose (Ø shank) 0.~.- items P.7 MSXLB Long neck, radius Ø~ - items P. MSXL -flute square, long neck Ø0.~.- items P.0 MSMB Cutting edge length = D, ball nose ~-9 items P. MSXLB Long neck, ball nose (Ø shank) 0.~.- items P. MSMB adius Ø~-9 items P. MSMS MSJS -flute square Ø0.~-7 items P.9 MSMC MSJC -flute square Ø~- items P. New MS Coating The newest high performance coating!! Coating (Ti, Al)N coating Special micro-grain cemented carbide MS coating is the newest, cutting-edge technology coating developed by integrating Mitsubishi Materials Kobe Tool's (Kobelco) high coating technology and Mitsubishi Materials' high material technology. It is suitable for high speed, high efficiency machining of a wide range of workpiece materials including hardened steel, preharden steel, carbon steel, and stainless steel.
3 High accuracy achieved by ball nose end mill-. Competitor's ball nose end mill-. small diameter end mill achieves high accuracy and runout accuracy Order numbers for MS M B D000 S 00 Number of flutes Coating Flute Length S Short M Medium J Semi long L Long XL Long relieved S C B H B T Feature General Purpose Center cutting Ball nose High Helix Corner adius Ter flute N S Neck length Shank size adius size Specification Please refer to the tables on page -. Cutting performance of 0. Ball nose end mill [Workpiece: AISI H (HC), Cutting length: 0m] MSSB000S0 Competitor A (0.) 0.mm x times Cutting direction maintained high accuracy!! The part got out of she. * Competitor B suffered from tool breakage. 0.mm x 0 times <Cutting conditions> evolution: 0,000min - (-SFM) IPT:.000 inch Air blow dry only Tool life of ball nose end mills Flank wear Competitor A Competitor B Competitor C Cutting length(m) 0.mm mm Down cutting <Cutting conditions> Workpiece: AISI H ( HC) Tool: Ball nose end mills () made of coated cemented carbide evolution:,min - Cutting speed: SFM IPT:.00 Depth of cut: mm (.079 inch) Pick feed: 0.mm (.0 inch) Air blow dry only
4 Cutting performance of Slot milling Ø, -flute square end mill [Workpiece: AISI P ( HC), Cutting length: 0m ( slots)] MSMSD000 Competitor A (Ø.0) mm 0.mm x 0 times é * Competitor B suffered from tool breakage after machining m. Competitor C suffered from tool breakage after machining 7m. Ø, -flute square end mill [Workpiece: AISI 0, Cutting length: m] MSMCD000 Competitor A (Ø.0) <Cutting conditions> evolution: 0,000min - (0 SFM) IPT:.000 inch Air blow dry only Seen from the above Seen from the side <Cutting conditions> evolution: 0,000min- (0 SFM) Feed: 0mm/ min (.7 ipm) Feed: Axial direction 0mm/ min (. ipm) Shoulder milling Depth of cut: Axial direction 0.mm X 0 times (depth mm, slot length 00mm) Air blow dry only Ø, -flute square end mill [Workpiece: AISI H (HC), Cutting length: m] Blind slot Tool life AISI H (HC) High chipping resistance and long tool life Chipping Competitor A Chipping Competitor B Flank wear MSMSD Cutting length(m) mm 0.mm <Cutting conditions> evolution:,0min - ( SFM) IPT:.0009 inch Down cutting Air blow dry only
5 Standard of MSSB éd (Short cutting edge type ball nose end mill) 0 L éd (h) D MSSB000S0 MSSB000S0 MSSB00S0 MSSB00S0 MSSB000S0 MSSB000S0 MSSB00S0 MSSB00S0 MSSB000S0 MSSB000S0 MSSB00S0 MSSB000S0 MSSB000S0 MSSB00S0 MSSB00S0 MSSB00S0 MSSB000S0 MSSB000S0 MSMB Dimensions éd L D 0 L (Medium-length cutting edge type ball end mill) D..... MSSB00S0 MSSB00S0 MSSB007S0 MSSB007S0 MSSB000S0 MSSB000S0 MSSB00S0 MSSB00S0 MSSB000S0 MSSB000S0 MSSB0S0 MSSB0S0 MSSB0S0 MSSB000S0 MSSB0S0 0 MSSB000S0 * MSSB000S0 * MSSB00S0 * MSSB000S * Available in Summer of 00 éd (h) Dimensions L D D MSMB00 MSMB000 MSMB000 MSMB00 MSMB000 MSMB00 MSMB007 MSMB000 MSMB00 Dimensions.... L : Please refer to page for recommended cutting conditions. D D MSMB000 MSMB0 MSMB0 MSMB07 MSMB000 MSMB0 MSMB000 * MSMB000 * MSMB00 * MSMB000 * Available in Summer of 00 Dimensions L D
6 MSXLB007N00 MSXLB000N00 MSXLB000N0 MSXLB000N0 MSXLB000N00 MSXLB00N00 MSXLB00N0 MSXLB00N0 MSXLB00N00 MSXLB000N00 MSXLB000N00 MSXLB000N00 MSXLB000N00 MSXLB000N0 MSXLB000N0 MSXLB000N0 MSXLB000N0 MSXLB000N00 MSXLB000N0 MSXLB000N MSXLB000N00 MSXLB0N00 MSXLB0N00 MSXLB0N0 MSXLB0N0 MSXLB0N00 MSXLB0N MSXLB0N00 MSXLB0N MSXLB000N00 MSXLB000N0 MSXLB000N0 MSXLB000N00 MSXLB000N MSXLB000N00 MSXLB000N MSXLB000N00 MSXLB000N MSXLB000N0 MSXLB0N00 MSXLB0N MSXLB0N00 MSXLB0N MSXLB000N00 MSXLB000N0 D Dimensions L L MSXLB000N00 MSXLB000N00 MSXLB000N0 MSXLB00N00 MSXLB00N00 MSXLB000N00 MSXLB000N00 MSXLB000N00 MSXLB00N00 MSXLB00N00 MSXLB00N00 MSXLB00N00 MSXLB00N00 MSXLB000N00 MSXLB000N00 MSXLB000N00 MSXLB000N00 MSXLB000N00 MSXLB000N00 MSXLB000N00 MSXLB000N00 MSXLB000N00 MSXLB000N00 MSXLB00N00 MSXLB00N00 MSXLB00N00 MSXLB00N00 MSXLB00N00 MSXLB00N0 MSXLB00N0 MSXLB00N0 MSXLB00N0 MSXLB00N00 MSXLB000N00 MSXLB000N0 MSXLB00N00 MSXLB00N0 MSXLB00N0 MSXLB007N00 MSXLB007N00 MSXLB007N00 MSXLB007N0 MSXLB007N0 MSXLB007N0 MSXLB007N0 D D Dimensions L L D D D éd éd L L éd (h) (-flute,long neck type ball nose end mill) Standard of Please refer to page for recommended cutting conditions.... MSXLB :. : New products.
7 Standard of MSXLB (-flute, long neck type ball nose end mill) éd 0 L éd éd (h) L D Dimensions L L D D D Dimensions L L D D MSXLB000N00 MSXLB000N00 MSXLB00N00 MSXLB00N0 MSXLB000N0 MSXLB000N00 MSXLB00N0 MSXLB00N0 MSXLB000N0 MSXLB000N00 MSXLB000N0 MSXLB000N MSXLB00N00 MSXLB00N0 MSXLB000N0 MSXLB000N00 MSXLB007N0 MSXLB007N07 MSXLB000N00 MSXLB000N00 MSXLB0N07 MSXLB0N :. : New products. Please refer to page for recommended cutting conditions.
8 MSMTB007T000 MSMTB007T00 MSMTB000T000 MSMTB000T000 MSMTB000T00 MSMTB000T000 MSMTB000T000 MSMTB000T000 MSMTB000T00 MSMTB000T00 MSMTB0T000 MSMTB0T000 MSMTB0T00 MSMTB0T000 MSMTB0T000 MSMTB0T000 MSMTB0T00 MSMTB0T00 MSMTB0T00 Dimensions D D L MSMTB000T000 MSMTB000T00 MSMTB000T00 MSMTB000T000 MSMTB000T000 MSMTB000T00 MSMTB000T00 MSMTB000T000 MSMTB00T000 MSMTB00T000 MSMTB00T00 MSMTB00T000 MSMTB00T000 MSMTB00T00 MSMTB00T00 MSMTB007T000 MSMTB007T000 MSMTB007T00 MSMTB007T000 D B ' 7 0' 0' Dimensions D.. D L D B7 7 0' 0' 7 0' 0' éd éd (h) L éd B Please refer to page for recommended cutting conditions. : (-flute,tered type ball nose end mill) Standard of MSMTB
9 Dimensions D L MSMBD00000 MSMBD00000 MSMBD000 MSMBD000 MSMBD00 MSMBD00000 MSMBD00000 MSMBD0000 MSMBD000 MSMBD000 MSMBD00 MSMBD00000 MSMBD00000 MSMBD0000 MSMBD00000 MSMBD00000 MSMBD00000 MSMBD0000 MSMBD00000 MSMBD0000 MSMBD0000 MSMBD000 MSMBD0000 MSMBD00000 MSMBD00000 MSMBD0000 MSMBD00000 MSMBD000 MSMBD00000 D Dimensions D L D Dimensions L 0 0 L MSXLBD00000N00 MSXLBD00000N0 MSXLBD00000N00 MSXLBD00000N00 MSXLBD00000N00 MSXLBD00000N00 MSXLBD00000N00 MSXLBD00000N MSXLBD00000N00 MSXLBD00000N MSXLBD00000N00 MSXLBD00000N00 MSXLBD00000N00 MSXLBD00000N00 MSXLBD0000N00 MSXLBD0000N00 MSXLBD00000N0 MSXLBD00000N00 MSXLBD00000N0 MSXLBD00000N00 MSXLBD0000N0 MSXLBD0000N00 D D D D Dimensions L L D D L éd éd (h) L L éd éd (h) éd (-flute radius end mill) Standard of (-flute,long neck type radius end mill) Please refer to page for recommended cutting conditions. :. : New products. MSMB MSXLB
10 Sharp edge L ØD ØD (h) (SJ:D,gashed land edge) 0 D D L Dimensions MSJSD000 MSMSD000 MSJSD000 MSMSD000 MSJSD000 MSMSD000 MSJSD000 MSMSD00 MSJSD00 MSMSD000 MSJSD000 MSMSD00 MSJSD00 MSMSD000 MSJSD000 MSMSD00 MSJSD00 MSMSD000 MSJSD000 MSMSD00 MSMSD00 MSJSD00 MSMSD00 MSMSD00 MSMSD0 MSJSD0 D D L Dimensions MSMSD00 MSMSD0 MSMSD00 MSJSD00 MSMSD0 MSMSD000 MSJSD000 MSMSD00 MSMSD00 MSMSD00 MSMSD00 MSMSD0 MSJSD0 MSMSD00 MSMSD0 MSMSD00 MSMSD0 MSMSD000 MSJSD000 MSMSD000 MSJSD000 MSMSD00 MSJSD00 MSMSD000 MSJSD000 MSMSD000 MSJSD000 MSMSD000 MSJSD000 MSMSD00 MSJSD00 9 Please refer to page for recommended cutting conditions. (-flute square end mill) Standard of * * * * * * * Available in Summer of 00 MSMS MSJS :. : New products.
11 D D L L Dimensions MSXLD000N00 MSXLD000N0 MSXLD000N00 MSXLD000N00 MSXLD00N0 MSXLD00N0 MSXLD000N0 MSXLD000N00 MSXLD00N0 MSXLD00N0 MSXLD000N00 MSXLD000N00 MSXLD00N0 MSXLD00N0 MSXLD000N0 MSXLD000N0 MSXLD00N0 MSXLD00N0 MSXLD00N00 MSXLD00N00 MSXLD00N0 MSXLD00N0 MSXLD00N D D D L L Dimensions MSXLD00N0 MSXLD0N0 MSXLD0N07 MSXLD00N00 MSXLD00N00 MSXLD0N0 MSXLD0N0 MSXLD00N0 MSXLD00N0 MSXLD0N0 MSXLD0N09 MSXLD000N0 MSXLD000N00 MSXLD00N0 MSXLD00N0 MSXLD00N0 MSXLD00N0 MSXLD00N0 MSXLD00N MSXLD00N00 MSXLD00N0 MSXLD0N0 MSXLD0N D L L éd éd (h) éd Sharp edge (-flute,long neck type square end mill) Standard of Please refer to page for recommended cutting conditions. :.
12 Standard of (-flute square end mill) éd éd (h) 0 Sharp edge L D Dimensions L D D Dimensions L D.. MSMCD000 MSJCD000 MSMCD0 MSJCD0 MSMCD000 MSJCD000 MSMCD0 MSJCD0 MSMCD000 MSJCD000 MSMCD MSJCD000 MSMCD00 MSJCD00 MSMCD000 MSJCD000 * MSMCD000 * MSJCD000 * MSMCD000 * MSJCD000 * MSMCD00 * MSJCD * Available in Summer of 00 :. Please refer to page for recommended cutting conditions.
13 ecommended cutting conditions of -flute ball nose end mill MSSB MSXLB MSMB MSMTB MSXLB Cutting mode Workpiece Alloy steel / Tool steel Pre-hardened steel ( < HC) Hardened steel ( - HC) Cutting conditions (inch) SFM IPT SFM IPT Pf MSSB MSMB MSMTB < 0. Pf=0.(0.-) =0.(.-) MSXLB() < 0.07 Pf=(0.~) 0.(.~) Note ) Figures above are general cutting conditions. Please select propriate cutting conditions based on the figures above according to your own machine conditions. In doing so, adjust spindle speed and table feed at the same rate.
14 ecommended cutting conditions of -flute square end mill MSM MSJ MSXL MSMB MSXLB Cutting mode Workpiece Cutting conditions Carbon steel Alloy steel (0-0HB) Carbon steel Alloy steel (0-0HB) Pre-hardened steel ( - HC) Stainless steel Cast iron (Tensile strength < N/mm ) Slot milling MSM(J) / MSMB < < 0.D > < 0.D MSXL / MSXLB < < 0.0D > < D (inch) SFM IPT SFM IPT SFM IPT SFM IPT SFM IPT MSM MSJ MSMB Cutting mode Workpiece Cutting conditions Hardened steel ( - HC) Slot milling MSM(J) / MSMB < < 0.0D > 0. < 0.0D (inch) SFM IPT Note ) When shouder milling, feed can be increased by proximately 0 - %. Note ) Figures above are general cutting conditions. Please select propriate cutting conditions based on the figures above according to your own machine conditions. In doing so, adjust spindle speed and table feed at the same rate.
15 ecommended cutting conditions of -flute square end mill MSM MSJ Cutting mode Workpiece Cutting conditions Carbon steel Alloy steel ( < 0HC) Alloy steel,tool steel Pre-hardened steel (0 - HC) Stainless steel Cast iron (Tensile strength N/mm ) Aluminium alloy Shoulder milling (inch) SFM IPT SFM IPT SFM IPT SFM IPT SFM IPT ae MSM / MSJ < mm <.D ae < 0.D > mm <.D ae < 0.D MSM MSJ Cutting mode Workpiece Hardened steel ( - HC) Hardened steel ( - 0HC) Cutting conditions (inch) SFM IPT SFM IPT Shoulder milling ae MSM / SJM < D ae < 0.0D Note ) Figures above are general cutting conditions. Please select propriate cutting conditions based on the figures above according to your own machine conditions. In doing so, adjust spindle speed and table feed at the same rate. Note ) When using MSJ, reduce revolution and feed to proximately % of the figures above.
16 Application examples for Tool MSSB0S0 MSSB000S0 Workpiece AISI H TOOL STEEL (7 HC) Semi-finishing ~ finishing where depth of cut is 0.0 ~ 0.mm. (0.00 ~ 0.00 inch) AISI 0 STAINLESS STEEL (0 HC) Finishing of the part of a mold groove, etc. Component Connecting rod (forged) Plastic mold Cutting conditions Cutting speed(m/min) Feed (mm/tooth) evolution (min-) Table feed (mm/min) Coolant Machine 9 (0 SFM) 0. (0.00 IPT) 0,000,000 (79 IPM) Dry (air blow) Machining center ( SFM) 0.00 (0.000 IPT) 7,00 7 (. IPM) Dry (air blow) Machining center esult Tool life (Cutting length/ workpiece: About m) Competitor's 0 Cutting length (m) Intensified machining process ( part of the slot) Depth of cut plied before When using MSTA For roughing: 0.mm Only one machining process For roughing: (0.007 inch) required, maintaining high For finishing : 0.0mm accuracy. Tool life (0.00 inch) Depth of cut: 0.mm Depth of cut: (0.00 inch) Number of end mills needed for producing one mold Before ~ tools When using MSTA Only one tool needed Tool MSJCD000 MSMSD000 Workpiece AISI 0 CABON STEEL Side surface finishing of a mold part. (Depth: mm, Width: 0.mm) AISI 0 STAINLESS STEEL ( HB) Enlarging of drilled holes (Ø Ø. Depth: 0. ) 0 0 Component Plastic mold Part used for a medical device Cutting conditions Cutting speed(m/min) Feed (mm/tooth) evolution (min-) Table feed (mm/min) Coolant Machine ( SFM) 0.0 (0.00 IPT), (. IPM) Dry (air blow) Machining center. (0 SFM) 0.00 (0.000 IPT) 0,000 0 (.7 IPM) Water soluble cutting oil Machining center Tool life (Comparison of wear conditions after machining m) Flank wear Number of holes 0 No. of holes esult Competitor's Competitor's MSTA achieved longer tool life and. times higher feed. Conventional feed: 0mm/ min (. IPM) Eastman Street, Irvine, California 9, U.S.A. TEL. (00) - FAX. (00) -9 Customer Service: (00) -000 Technical Support: (00) - Chicago Branch Office: 999 New Wilke d, Suite 00,olling Meadows, Illinois 000, U.S.A. TEL FAX Detroit Branch Office: Country Club Drive, Suite A-, Farmington Hills, Michigan, U.S.A. TEL FAX Toronto Branch Office: Millcreek Drive, Unit &, Mississauga, Ontario, Canada LN M TEL FAX. --0 Av.La Cañada No., Parque Industrial Bernardo Quintana, El Marques, Queretaro, CP 7 Mexico TEL FAX EDP# 00 r. Printed in the U.S.A.: /0
Additional line up of Inch Sizes debut!
NEW Solid End Mills MSTA B083A Long Neck Series Inch Sizes Additional line up of Inch Sizes debut! Solid End Mills MSTA Additional line up of Inch Sizes debut! Long Neck Series Inch Sizes MS2XL - Inch
More informationExcellent for Swiss type automatic machine applications! MSTAR End Mill for Swiss type machine tools B074A MSTAR END MILL SERIES
B074A MSTAR END MILL SERIES MSTAR End Mill for Swiss type machine tools Excellent for Swiss type automatic machine plications! Overall length suitable for small automatic lathe machining. (35mm and 45mm)
More informationTAW Drill. Indexable insert drill, yet always stable drilling. Stable drilling with indexable drill B060A. MIRACLE Coated VP15TF
B060A Stable drilling with indexable drill Indexable insert drill, yet always stable drilling Grade for high rigidity and longer tool life MIRACLE Coated MIRACLE coating displays high welding resistance
More informationdrill MITSUBISHI CARBIDE New Products LJ293A Large diameter sizes added. Solid carbide drill
MITSUBISHI CARBIDE LJ293A New Products Solid carbide drill Large diameter sizes added. MZ drill Internal and external coolant, multi purpose high performance drill. MZ drill, characteristics and application
More informationSolid carbide drill WSTAR 5XD DRILL B026A. Superior design wavy cutting edge & flute geometry
Excellent multi-purpose applications from general steel to nickel based alloys A wide application range from.125 to.7812 inch. Sharp cutting edge performance and smooth chip discharge B26A Solid carbide
More informationDouble-sided positive insert for semi-finishing to finishing
MillLine Tungaloy Report No. 508-US DOMINI-MILL Double-sided positive insert for semi-finishing to finishing ACCELERATED MACHINING MillLine DoMini-Mill features the advantage of an economical 6-cornered
More information4/5/6RFH 4/5/6RFH NEW. High Efficiency Roughing End Mill for Difficult-to-Cut Material
For Difficult-to-Cut Material High Efficiency Roughing End Mill 4/5/6RFH High Efficiency Roughing End Mill for Difficult-to-Cut Material 4/5/6RFH NEW High Efficiency Machining of Difficult-to-Cut Material
More informationAPOLLO. Variable Helix Corner Radius End Mills. Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel
Variable Helix Corner Radius End Mills Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel Unequal Flute Design for Chatter Resistance Great for Roughing or Finishing High Performance
More informationIndexable endmill for high precision finishing
MillLine Tungaloy Report No. 431-US BALLFINISH-NOSE Indexable endmill for high precision finishing ACCELERATED MACHINING MillLine Excellent surface finish and stable machining due to secure clamping and
More informationMiniature shoulder milling cutter with incomparable stability
MillLine Tungaloy eport No. 56-US TUCE-EC Miniature shoulder milling cutter with incomparable stability 2 TUCE-EC 2 TU TU TU TU TU TU TU T C C C C C C C C C CE- E- E- E- E- E- E- E- E E E E E E E C ACCELEATED
More informationNew Version. High performance economical double sided inserts with 4 cutting edges! Shoulder milling cutter. Featuring new 18 size insert NEW
Keeping the Customer First Tungaloy Report No. 390-US Shoulder milling cutter Version Featuring new 18 size insert High performance economical double sided inserts with 4 cutting edges! NEW LQMU11 LQMU18
More informationPRODUCT INFORMATION CBN-SXR CBN-LN-SXR CBN-SXB CBN-LN-SXB. CBN End Mill Series
PRODUCT INFORMATION CBN-LN-SXR CBN-LN-SXB CBN End Mill Series The helical flutes are changing the CBN end mills! Highly Appealing OSG CBN End Mill Series Are you bothered by these issues? The work material
More informationKeeping the Customer First Tungaloy Report No. 369-J Tungaloy Report No. 372-US Face milling cutter NEW New grades TEN / EEN type extended version
Keeping the Customer First Tungaloy Report No. 369-J 37-US cutter NEW TEN / EEN type New grades extended version Highly productive and economical face milling cutter! T UNGALOY Features Double sided pentagonal
More informationOptimum tool for finish machining
Series Expansion Indexable Ball-nose End Mill for Finishing Indexable Corner Radius End Mill for Finishing 2011.2 Update B065E SRF/SRB SUF High accuracy indexable end mill Optimum tool for finish machining
More informationHigh Precision Violet Series Drills for Counter Boring VA-PDS-CB Exclusive design for counter boring.
212.12 Update B159B New sizes included High Precision Violet Series Drills for Counter Boring Exclusive design for counter boring. y Innovative cutting edge geometry for high performance counter boring.
More informationCONTENTS WELCOME TO THE WORLD OF HIGH-SPEED INNOVATION
Colibri Spindles ltd. Lavon Industrial Park, 2011800, Israel Tel +972 4 9089100 Fax +972 4 9589061 marketing@colibrispindles.com www.colibrispindles.com HSM JET SPINDLE TJS-CS01-07-2017 Case Study Summaries
More informationHybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining
No.011-USA April 2009 Small diameter endmills able to handle various machining modes Hybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining Hybrid TAC Mills provide
More informationStable parting-off operations due to unique clamping system
GrooveLine Tungaloy Report No. 504-US DUOJUST-CUT Stable parting-off operations due to unique clamping system ACCELERATED MACHINING GrooveLine DuoJust-Cut, a new line of small tools with a durable insert
More informationImproved Efficiency for Slot Milling with Deep Depths of Cut
TOOLS NEWS B230G Corner Radius End Mill for High Efficiency Titanium Alloy Machining New Product Improved Efficiency for Slot Milling with Deep Depths of Cut Corner Radius End Mill for High Efficiency
More informationRouter Section 2018 Master Catalog
Router Section 2018 Master Catalog For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance and
More informationLeading edge technology for high efficiency steel turning
TOOL NEWS New CVD Coated Grade for High Speed Steel Turning 2013.4 Update B165A /RP Breaker Expansion Leading edge technology for high efficiency steel turning 2 in 1 technology ensures longer tool life.
More informationIABP4F/ABP4F. Four Flute Indexable Ball End Mills for High Efficiency Finishing SHANK STYLE MODULAR STYLE FEATURES
Four Flute Indexable Ball End Mills for High Efficiency SHANK STYE MODUA STYE FEATUES Four flute design provides improved productivity compared to traditional two-flute design adius tolerance of ±0.01mm
More informationThread Mills. Solid Carbide Thread Milling Cutters
Thread Mills Solid Carbide Thread Milling Cutters Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than indexable
More information3AFK 3AFK. For Aluminum Machining. 3-Flute End Mill for High Efficiency and Precision. Solid End Mill
Solid End Mill For Machining 3-Flute End Mill for High Efficiency and Precision High Efficiency with 3-Flutes. Excellent Precision Machining Stable Machining due to sharp edge for Anti-chattering Performance
More informationThe new generation end mill series. Ideal for efficient and economical machining of general milling applications.
New vibration control solid carbide end mill series SHV, MHV TAR vibration control end mill series The new generation end mill series. Ideal for efficient and economical machining of general milling applications.
More informationsolid carbide tools 100% cnc manufactured in the usa
solid carbide tools 100% cnc manufactured in the usa V w isi w t w ou. C dura r w at m eb 20 al ill si 09 og.co te m Maximum Performance End Mills Series Product Page# WK-3-R WK-3 WK-3-ER WK-BN-3 WK-4-R
More informationTOOLS NEWS B228G. Ceramic End Mills. CERAMIC Corner Radius End Mills. Ultra high productivity for nickel based heat resistant alloys CERAMIC
Ceramic End Mills TOOLS NEWS B228G CERAMIC Corner Radius End Mills Ultra high productivity for nickel based heat resistant alloys CERAMIC CERAMIC End Mill Series From difficult-to-cut to easy-to-cut! Generation
More informationTungsten Carbide End Mills UNIMAX Series
Tungsten Carbide End Mills UNIMAX Series Diamond Coated 2 Flute UDC Series NEW NEW UDCBF UDCLBF UDCB UDCLB UDCLRS High-grade Ball End Mills High-grade Long Neck Ball End Mills Ball End Mills Long Neck
More informationIndexable ball end mill for finishing. ABPFN type. Ball Precision F ABPFN type. New Product News No.1606E
Indexable ball end mill for finishing ABPFN type Ball Precision F ABPFN type New Product News No.1606E-1 2017-6 High cutting performance by S-shaped cutting edge! High helix edge shape provides a beautiful
More informationPRODUCT INFORMATION SERIES VOL.3. Diamond Coated End Mills for Graphite! DG Coated End Mill Series: DG-EBD / DG-LN-EBD / DG-CPR.
PODUCT INFOMATION DG SEIES VOL.3 Diamond Coated End Mills for! DG Coated End Mill Series: DG-EBD / DG-LN-EBD / DG-CP SEIES Diamond Coated End Mills for Features of Coating Smooth diamond coating achieved
More informationMETRIC THREAD MILLS SINGLE PROFILE (SPTM) - SOLID CARBIDE. Scientific Cutting Tools, Inc. Q A C OAL 60º THREAD MILLS METRIC
METRIC SINGLE PROFILE (SPTM) - SOLID CARBIDE METRIC Q A B 60º C S With just 19 varieties of Thread Mills, fine and coarse threads ranging from M1.2 to M30+ can be milled SPECIALTY PORT - CAVITY INDEXABLE
More informationDrill for Wheel Hubs. Solid Carbide Drill MHE
. Update B3G Expanded New Grade Solid Carbide Drill Uniue design provides superior hole accuracy for shallow hole drilling. Effective drilling of hub bolt holes can be achieved. Additional new grade DP30
More informationSolid Carbide Thread Milling Cutters
Solid Carbide Thread Milling Cutters Second Edition Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than
More informationMillLine Tungaloy Report No. 429-US www.tungaloyamerica.com Exceptional productivity for aluminum and non-ferrous material machining! www.tungaloyamerica.com MillLine V-shaped bottom secures insert on
More informationFeatures. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical
Engraving This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUAITY ENGRAVING in most materials. The latest coated carbide
More informationFMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 42/43 FM Style 2 Toroid Taper End Milling Cutter 42/43 FMA Arbor Style Milling Cutter 42/43 Insert ata 44/45 Cutting
More informationTechnical Information for Power Buster
Technical Information for ower Buster Recommended cutting condition ISO Workpiece NC5330 NC335 0.0040.008 0.0040.008 0.0040.008 vg(sfm) High speed NC5330 NC335 Carbon steel 919755591 820656525 755591492
More informationCopy Milling Program Tools
Millstar face mills are equally useful on newer high velocity machines and older slower equipment and will optimize milling performance of all your machine tools. The hardened tool bodies can be run at
More informationFMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 38/39 FM Style 2 Toroid Taper End Milling Cutter 38/39 FMA Arbor Style Milling Cutter 38/39 Insert ata 40/41 Cutting
More information+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
More informationSpeed (SFM) Radial DOC x D. .5 x D. 1 x D. .5 x D. 1 x D. .5 x D.
GP High Performance 4 Flute End Mills TyCarb GP High Performance end mills feature Differential flute spacing to achieve virtually chatter free machining in a wide range of materials. Excellent results
More informationEMP01. Indexable Milling Tools. Square shoulder milling tools B 88. Kr:90 o. Specification of tools. Spare parts. EMP01 Straight shank.
Milling Tools Kr:90 o Step shoulder Slot milling Ramp milling Helical machining Plunge milling EMP01 Straight shank Specification of tools EMP01 Straight shank Stock Basic dimensions(mm) ØD ød L L1 apmax
More informationAXD TOOLS NEWS. Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. B116E
TOOLS NEWS For Machining of Aluminium and Titanium Alloys AXD 2014.01 Update B116E Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. For Machining
More informationIncreases the feed rate up to. 400% using 4 inserts! Compared with competitor's cutter. The Ultra High Feed Chamfer Mill
The Ultra High eed Chamfer Mill CATAOG No. - ong Type Hexagon Increases the feed rate up to 00% using inserts! Compared with competitor's cutter Eccentric Design for Tapped Holes New series exclusively
More informationWhy settle for 2 cutting edges when you can have 3 on one insert?
MillLine www.tungaloyamerica.com Tungaloy Report No. 421-US TUNG-TRI Why settle for 2 cutting edges when you can have 3 on one insert? ACCELERATED MACHINING 2 TUNG-TRI MillLine Tung-Tri s economical insert
More informationFeatures. Special forms are possible
Center Drill >> The is a trademark of Nine9, the developer of the first indexable center drill in the world.(patented) Offering an indexable insert system for the 1st time, Nine9 s design improves your
More informationMASTER CATALOGUE. Beyond EADE Solid Ceramic End Mills.
MASTER CATALOGUE Beyond EADE Solid Ceramic End Mills Beyond EADE Solid Ceramic End Mill Primary Application EADE Solid Ceramic End Mills offer higher productivity and tool life in roughing nickel-based
More informationInnovative insert provides superior
TurnLine Tungaloy Report No. 417-US MINIFORCE-TURN Innovative insert provides superior economic advantages! ACCELERATED MACHINING TurnLine VXGU insert, new toolholders, new chipbreaker, and new grades
More informationUN THREAD MILLS SINGLE PROFILE (SPTM) - SOLID CARBIDE. Scientific Cutting Tools, Inc. OAL 60º THREAD MILLS
UN SINGLE PROFILE (SPTM) - SOLID CARBIDE UN Q A B 60º C S Fine and coarse threads ranging from #00 to 1¼ + can be milled using the 19 varieties of these single profile thread mills. SPECIALTY PORT - CAVITY
More informationwith better tools from Introducing: Dapra's New Modular Heads Designed to Screw On to Industry Standard Systems
CUTTING Times Vol. 4, Issue 1 with better tools from Dapra Corporation 66 Granby Street, Bloomfield, CT 06002 1-800-243-3344 860-242-8539 Fax 860-242-3017 Email info@dapra.com www.dapra.com Introducing:
More informationPlus Our NEW Quick Delivery Step Drill Program
LE ADING SOLUTIONS FOR CHAMFERED / THRE ADED HOLES Plus Our Quick Delivery Step Drill Program CHAMFERED / THREADED HOLE SOLUTIONS From standard stocked tools to our Quick Delivery Program a full range
More informationOptimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.
Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized
More information地址 : 中国湖南株洲市天元区黄河南路 Address: Huanghe Southern Road, Tianyuan Zone,Zhuzhou, Hunan Province, China 邮编 (Postcode): 电话 (Tel):
地址 : 中国湖南株洲市天元区黄河南路 Address: Huanghe Southern Road, Tianyuan Zone,Zhuzhou, Hunan Province, China 邮编 (Postcode): 412007 电话 (Tel): 0731-22882430 22889474 22889477 22889468 22887814 22880853 22882725 22882431
More informationSTUB ACME - INTERNAL AND EXTERNAL
STUB ACME - INTERNAL AND EXTERNAL SOLID CARBIDE SINGLE PROFILE ACME Q A 29º B C S Solid carbide for maximum tool rigidity coating for increased performance Single start threads only SPECIALTY PORT - CAVITY
More informationThink efficiency, Think HSS MILLING
Think efficiency, Think HSS MILLING SUMMARY MILLING TOOLS 2 Zoom on a milling cutter 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Select
More informationCARBIDE END MILLS SPECIFICATIONS
SPECIFICATIONS COATING GUIDE Material Hardness TiN TiCN TiALN Austentic Stainless Steel < 35 HRc * X Martinistic Stainless Steel < 35 HRc * X Martinistic Stainless Steel >= 35 HRc X PH Stainless Steel
More informationA660A OIL & GAS APPLICATIONS
A660A OIL & GAS APPLICATIONS INDEX Oil & Gas COUPLING 3 6 INNER SLEEVE 4 7 BOP 5 FLANGED ROCK BIT INNER SLEEVE BOP INNER SLEEVE BOP FLANGED COUPLING COUPLING 2 ROCK BIT ROCK BIT COUPLING Work Materials:
More informationNEW. MILLLINE High Speed Milling Cutter. Exceptional productivity for aluminum and non-ferrous machining. Keeping the Customer First
Keeping the Customer First Tungaloy Report No. 429-US MILLLINE High Speed Milling Cutter NEW Exceptional productivity for aluminum and non-ferrous machining NEW CHIPBREAKER Outstanding productivity in
More informationFeatures. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical
Engraving This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUAITY ENGRAVING in most materials. The latest coated carbide
More informationLecture 15. Chapter 23 Machining Processes Used to Produce Round Shapes. Turning
Lecture 15 Chapter 23 Machining Processes Used to Produce Round Shapes Turning Turning part is rotating while it is being machined Typically performed on a lathe Turning produces straight, conical, curved,
More informationCylindrical shank version Indexable Insert Endmill
Cylindrical shank version Indexable Endmill ø1 - ø 1 ød ST-FCM1-0 -FCM- 0 -FCM0-0 ST-FCM0-0 ST-FCM0- ST-FCM- -FCM- -FCM- 1 1 ød 1 0 0 1 17 0 0 0 70 1 ARG00 ARG00 ARG00 ARG0 ARG0 CATAOG No. =The ength of
More informationAutomotive. Tooling Solutions. Providing Optimal Tooling Solutions for Automotive Machining
Automotive Tooling Solutions Providing Optimal Tooling Solutions for Automotive Machining Crankcase Cylinder Heads Crankshafts Camshafts Connecting Rods Valve Bodies Synchronizer Gears Main Shafts CVT
More informationXMR01 XMR01. Indexable Milling Tools. High feed milling cutters B 119. Specification of tools XMR01 XMR01. S type insert, straight shank.
Tools S type insert, straight shank Specification of tools Stock ØD L1 L ød Number of teeth Z asic dimensions(mm) Weight (kg) 0 1 0. -0-G-SD09-0 1-0-G-SD09-0 1-0-G-SD1-0 1-0-G-SD1-0 1 1. Stock available
More informationCarbide Drill for Hardened Steel EHSE-TH. Epoch TH Hard Drill. New Product News No.405E
Carbide Drill for Hardened Steel Epoch TH Hard Drill New Product News No.0E- 17-7 TH coating and guides with double margins make it last even longer. EDM, which is generally used for drilling hardend steel,
More informationT360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
More informationFlexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism
Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions
More informationNo Super Excellent MINI ASM Type. Introducing new JP/JM coating JP4005. Ultra-high efficiency JM4060 NEW PRODUCT NEWS. Small tool diameter,
NEW PRODUCT NEWS No.0 Patent Pending Super Excellent INI AS Type Grade for processing high-hardness materials Grade for processing stainless-steel materials Introducing new JP/J coating Small tool diameter,
More informationMELIN TOOL COUNTERSINKS
MELIN TOOL COUNTERSINKS TABLE OF CONTENTS GENERAL PURPOSE Zero Flute, Single Edge - HSS Zero Flute, Single Edge - Cobalt HSS Single Flute - HSS Single Flute - Cobalt HSS (M42) Single Flute, TiN Coated
More informationand AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems Allied Maxcut Engineering Co. Limited AMEC Indexable Drill Range The AMEC range of adjustable indexable carbide drills provides the
More informationINNOVATIONS CATALOG HARVI III Ball Nose
www.kennametal.com INNOVATIONS CATALOG HARVI III Ball Nose HARVI III Ball Nose High-Performance Solid Carbide End Mills Primary Application HARVI III Ball Nose tooling takes high-performance profiling,
More informationAMERICAN MADE GLOBALLY RENOWNED NEW PREMIUM TOOL LINE! HIGH PERFORMANCE END MILLS FOR TIGHT TOLERANCE FINISHING OF FERROUS MATERIALS
NEW PREMIUM TOOL LINE! AMERICAN MADE GLOBALLY RENOWNED HIGH PERFORMANCE END MILLS FOR TIGHT TOLERANCE FINISHING OF FERROUS MATERIALS www.conicalendmills.com www.globalcuttingtools.com TIGHT TOLERANCE FINISHING
More informationINDEXABLE BORING BAR AND INSERTS FLAT TOP, CHIP CONTROL, CBN, AND PCD
INDEXABLE BORING BAR AND S FLAT TOP, CHIP CONTROL,, AND 80 Diamond.156 IC R.156.040 80 DIAMOND FLAT TOP 80 DIAMOND CHIP CONTROL AT6+ 0.003 ACD5031 ACD5031E AT6+ 0.007 ACD5071 ACD5071E AT6+ 0.015 ACD5151
More informationPCD Cartridge Style Face Mill and End Mill Program
PC Cartridge Style Face Mill and End Mill Program soft, free- non-ferrous metals (eg: 6061 aluminum, brass, and copper) graphite, carbon, green ceramics, fiber-reinforced plastics, and fiberboard low-silicon
More informationTP2P. Tangen-Pro. Tangential Shoulder Milling Tool
Tangen-Pro TP2P Tangential Shoulder Milling Tool This milling tool series with its tangential clamping system increases stable machining and productivity, while improving perpendicularity Superior Clamping
More informationYour Specials Are Our Standards TM
09/2010 TM Your Specials Are Our Standards TM 400 New Tools Inside! See Inside Cover For Details ALL TOOLS IN STOCK! SAME DAY SHIPPING! Harvey Tool Company, LLC 319 Newburyport Turnpike Rowley, MA 01969
More informationIndexable Engraving 45 / 60 A Revolutionary New Concept Engraving Tools with Indexable Carbide Inserts THE ACCURATE & ADVANTAGED SOLUTION www.jic-tools.com.tw 2011-06 1 indexable engraving Tool Our innovative
More informationApplication and Technical Information Thread Milling System (TMS) Minimum Bore Diameters for Thread Milling
Inserts Application and Technical Information Minimum Bore iameters for Thread Milling UN-ISO-BSW tpi 48 3 4 0 16 1 10 8 7 6 5 4.5 4 Technical ata Accessories Vintage Cutters Widia Cutters Thread Milling
More informationIndexable Center Drill
i-center indexable center drill (patent pending) First Indexable center drill in the world. Shortens set up time and center drilling time. Increases tool life which reduces tooling cost. Special forms
More informationKr:90 o Face milling. Step shoulder. A-type coupling. C-type coupling. Stock Basic dimensions(mm) Number of teeth R L ØD ød L apmax Z
Milling Milling Tools Face Kr:90 o Face milling Step shoulder FMP01 A-type coupling -type coupling ap ap C-type coupling D-type coupling ap ap Stock asic dimensions(mm) Number of teeth R L ØD ød L apmax
More informationEmuge Chip-Breaking Tapping Technology. Only one Tool, for Horizontal and Vertical Apps! NEW Sizes + Coolant-Fed Taps!
TM Emuge Chip-Breaking Tapping Technology. Only one Tool, for Horizontal and Vertical Apps! NEW Sizes + Coolant-Fed Taps! Emuge Chip-Breaking Technology TM Emuge s new Rekord DZBF Series Taps featuring
More informationMILLING OF T-SLOTS. Excellent removal of chips, flushed by through coolant supply. In the UNITED STATES call us toll free HORN
MILLIN OF T-SLOTS Excellent removal of chips, flushed by through coolant supply. 1 MILLIN OF T-SLOTS MILLIN SHANK MU311.669 Material of shank: Carbide - iving a good vibration resistance for use with Insert
More informationLEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
More informationMachining Strenx and Hardox. Drilling, countersinking, tapping, turning and milling
Machining and Drilling, countersinking, tapping, turning and milling and are registered trademarks. These steel grades are manufactured only by SSAB. high strength steel and wear plate are steel grades
More informationCutting Tools. Round Tooling TMX-TOOL Fax
Round Tooling +1-508-653-8897 844-TMX-TOOL Fax +1-508-653-5110 www.tmxtools.com 245 Quick Lookup Round Tooling DRILLS...247 ANNULAR CUTTERS...295 REAMERS...299 COUNTERBORES AND COUNTERSINKS....321 CARBIDE
More informationKennametal Twist Drills KHSS Drill Dictionary
Kennametal Twist KHSS Drill Dictionary shank diameter tang tang drive axis taper shank shank length neck straight shank point angle helix angle flutes flute length body overall length drill diameter lip
More informationAUTOMOTIVE INDEX ENGINE
P650A AUTOMOTIVE INDEX AUTOMOTIVE Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of this research provides solutions for
More informationTOOLS NEWS B076G. Series Expansion Update
TOOLS NEWS 2013.10 Update B076G Solid CBN Grade for Cast Iron and Sintered Alloy Good balance of wear and fracture resistance from the high-performance sintering technology. New solid CBN for improved
More informationFeatuRes OF GeOMetRy. synchro tapping chuck (er type) advantages. GUIdE LINE TO ICONS
FeatuRes OF GeOMetRy synchro tapping chuck (er type) advantages GUIdE LINE TO ICONS Working Material GS s with good machinability Rm
More informationEngraving with a Rigid Tool Engraving Tool Feeds and Speeds
Engraving with a Rigid Tool Engraving Tool Feeds and Speeds Material 3000 RPM 6000 RPM 7500 RPM 10000 RPM Aluminum/Aluminum Alloys 6 12 15 20 Brass/Bronze 6 12 15 20 Copper/Copper Alloys 6 12 15 20 Cast
More information-treme thread cutting. Tiny Tools. New Products. Metric
TM -treme thread cutting Tiny Tools New Products Metric 2014-2015 Tiny Tools Broaching Tools for Hexagon Keys - HK The HK broaching system have been developed to machine internal keyways inside blind or
More informationVol. 1 HIGH PERFORMANCE INDEXABLE CUTTING TOOL SYSTEMS A PRODUCT OF:
Vol. HIGH PERFORMANCE INDEXABE CUTTING TOO SYSTEMS A PRODUCT OF: FIRST RATE TECHNOOGY SUPERIOR CUTTING PERFORMANCE Fullcut Mill Overview...Pg. 4-5 Fullcut Mill Type FCR...Pg. 6- Fullcut Mill Type FCM...Pg.
More information20 LEAD FACE MILL SERIES DM6G, DM5G
20 LEAD FACE MILL SERIES DM6G, DM5G Diameters Cutting Edge Length Insert Corner 1.500" to 8.000".230".030"R Facing Lead Angle Coolant Thru K H 70º.23 D3 D 1 D 2 D 3 Coolant Thru Effective Cutter Number
More informationCarbide Reamers...P18. Ejector Pin Counter Bores...P17
P1 Carbide Reamers...P18 Ejector Pin Counter Bores...P17 Extended Reach 2 Flute End Mills (For Machining Aluminum) Ball Nose...P15 Square End...P16 Extended Reach 4 Flute Coated End Mills Ball Nose...P11
More informationDRC type. MagicDrill. High efficiency drill module. New lineup. Machining diameters: Ø7.94-Ø20.99 Machining depths: 3D,5D,8D. High efficiency.
MagicDrill DRC type High efficiency drill module Larger cutting diameters now available High efficiency High reliability High feed rate High quality lineup SS-DRC (Straight Shank) Machining diameters:
More informationEnd Mills 4. Cutting Tools 1 (Cont d) End-mills (Cont d)
Outline Review of Milling Cutting Tools Milling Milling Operations Workpiece Materials Tool Selection Machining Tips Toolholders Fixtures Cutting Tools HSS tools Coated (TiN, Al O 3, TiAlN,...) versions
More informationHighly efficient machining of difficult-to-cut materials, such as stainless steal and superalloy.
B041G CDV for stainless steel turning Excellent toughness in relation to notch wear resistance. Highly efficient machining of difficult-to-cut materials, such as stainless steal and superalloy. yminimizing
More informationKeeping the Customer First. Tungaloy Report TE1008-E5. Multi-functional endmill EVX. with centre cutting edge for plunge milling
Keeping the Customer First Tungaloy Report TE1008-E5 Multi-functional endmill EVX with centre cutting edge for plunge milling with centre cutting edge for plunge milling Features Modern machining processes
More informationMachining. Drilling Countersinking Tapping Turning Milling
Machining Drilling Countersinking Tapping Turning Milling hardox and weldox are registered trademarks.these steel grades are manufactured only by SSAB Oxelösund AB. hardox wear plate and weldox extra-high
More informationRich line up of indexable drills for various
DrillLine Tungaloy Report No. 377-US TUNGDRILLTWISTED Rich line up of indexable drills for various machining needs ACCELERATED MACHINING DrillLine Excellent surface finish and stable chip evacuation due
More informationCoroMill. All solutions at a glance
CoroMill All solutions at a glance CoroMill Product overview Milling grades according to groups Shoulder milling CoroMill 316 CoroMill 490 CoroMill 790 Long edge cutter Insert size Max. cutting depth a
More information