Electrical haracteristics OFF HARATERISTIS TA = 25 unless otherwise noted PNP RF Transistor (continued) Symbol Parameter Test onditions Min Max Units

Size: px

Start display at page:

Download "Electrical haracteristics OFF HARATERISTIS TA = 25 unless otherwise noted PNP RF Transistor (continued) Symbol Parameter Test onditions Min Max Units"

Andra Collins
6 years ago
Views:

MPSH81 MMBTH81 MPSH81 / MMBTH81 E E B TO-92 SOT-23 Mark: 3D B PNP RF Transistor This device is designed for general RF amplifier and mixer applications to 250 mhz with collector currents in the 1.

1 MPSH81 MMBTH81 MPSH81 / MMBTH81 E E B TO-92 SOT-23 Mark: 3D B PNP RF Transistor This device is designed for general RF amplifier and mixer applications to 250 mhz with collector currents in the 1.0 ma to 30 ma range. Sourced from Process 75. Absolute Maximum Ratings* TA = 25 unless otherwise noted Symbol Parameter Value Units V EO ollector-emitter Voltage 20 V V BO ollector-base Voltage 20 V V EBO Emitter-Base Voltage 3.0 V I ollector urrent - ontinuous 50 ma T J, T stg Operating and Storage Junction Temperature Range -55 to +150 *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3) All voltages (V) and currents (A) are negative polarity for PNP transistors. Thermal haracteristics TA = 25 unless otherwise noted Symbol haracteristic Max Units MPSH81 *MMBTH81 P D Total Device Dissipation Derate above mw mw/ R θj Thermal Resistance, Junction to ase 125 /W R θja Thermal Resistance, Junction to Ambient /W *Device mounted on FR-4 PB 1.6" X 1.6" X 0.06." 1997 Semiconductor omponents Industries, LL. October-2017, Rev. 2 Publication Order Number: MPSH81/D

2 Electrical haracteristics OFF HARATERISTIS TA = 25 unless otherwise noted PNP RF Transistor (continued) Symbol Parameter Test onditions Min Max Units V (BR)EO ollector-emitter Breakdown Voltage* I = 1.0 ma, I B = 0 20 V V (BR)BO ollector-base Breakdown Voltage I = 10 µa, I E = 0 20 V V (BR)EBO Emitter-Base Breakdown Voltage I E = 10 µa, I = V I BO ollector utoff urrent V B = 10 V, I E = na I EBO Emitter utoff urrent V EB = 2.0 V, I = na MPSH81 / MMBTH81 ON HARATERISTIS h FE D urrent Gain I = 5.0 ma, V E = 10 V 60 V E(sat) ollector-emitter Saturation Voltage I = 5.0 ma, I B = 0.5 ma 0.5 V V BE(on) Base-Emitter On Voltage I = 5.0 ma, V E = 10 V 0.9 V SMALL SIGNAL HARATERISTIS f T urrent Gain - Bandwidth Product I = 5.0 ma, V E = 10 V, f = 100 MHz 600 MHz cb ollector-base apacitance V B = 10 V, I E = 0, f = 1.0 MHz 0.85 pf ce ollector Emitter apcitance V B = 10 V, I B = 0, f = 1.0 MHz 0.65 pf *Pulse Test: Pulse Width 300 µs, Duty ycle 2.0% NOTE: All voltages (V) and currents (A) are negative polarity for PNP transistors. Spice Model PNP(Is=10f Xti=3 Eg=1.11 Vaf=100 Bf=133.8 Ise=1.678p Ne=2.159 Ikf=.1658 Nk=.901 Xtb=1.5 Var=100 Br=1 Isc=9.519n Nc=3.88 Ikr=5.813 Rc=7.838 jc=2.81p Mjc=.1615 Vjc=.8282 Fc=.5 je=2.695p Mje=.3214 Vje=.7026 Tr=11.32n Tf=97.83p Itf=69.29 Xtf=599u Vtf=10) Typical haracteristics h - D URRENT GAIN FE D urrent Gain vs ollector urrent V E = 1.0V 160 T A = T A = T A = I - OLLETOR URRENT (ma) V - OLLETOR SAT. VOLTAGE (V) E( SAT) ollector Saturation Voltage vs ollector urrent I - OLLETOR URRENT (ma) T A = 25 T A = 125 T A = - 55 I = 10 I B 2

3 Typical haracteristics (continued) V - BASE- EMITTER SAT. VOLTAGE (V) BE( SAT) Base- Emitter Saturation Voltage vs ollector urrent I = 10 I B T A = T A = I - OLLETOR URRENT (ma) T A = - 55 V - BASE-EMITTER ON VOLTAGE (V) BE(O N) PNP RF Transistor (continued) Base-Emitter ON Voltage vs ollector urrent V E = 10V T A = 25 A T = 100 A I - OLLETOR URRENT (ma) MPSH81 / MMBTH81 I - OLLETOR REVERSE URRENT (na) ES ollector Reverse urrent vs Ambient Temperature V E = -6.0V V E = -3.0V T A - AMBIENT TEMPERATURE ( ) APAITANE (pf) Input / Output apacitance vs Reverse Bias Voltage ibo REVERSE BIAS VOLTAGE (V) f = 1.0 MHz obo -10 V - OLLETOR VOLTAGE (V) E ontours of onstant Gain Bandwidth Product (f ) MHz MHz 200 MHz 500 MHz 900 MHz I - OLLETOR URRENT (ma) T 1500 MHz 1200 MHz P - POWER DISSIPATION (mw) D Power Dissipation vs Ambient Temperature SOT-23 TO TEMPERATURE ( ) 3

4 TO-92 Tape and Reel Data TO-92 Packaging onfiguration: Figure 1.0 FSINT sample ON SEMIONDUTOR ORPORATION LOT: HTB:B BVK741B019 QTY: TAPE and REEL OPTION See Fig 2.0 for various Reeling Styles NSID: PN2222N SPE: D/1: D9842 SPE REV: B2 FSINT QA REV: (FSINT) F63TNR sample LOT: BVK741B019 QTY: 2000 FSID: PN222N SPE: D/1: D9842 QTY1: SPE REV: D/2: QTY2: PN: N/F: F (F63TNR)3 F63TNR 5 Reels per Intermediate Box ustomized 375mm x 267mm x 375mm Intermediate Box ustomized TO-92 TNR/AMMO PAKING INFROMATION Packing Style Quantity EOL code Reel A 2,000 D26Z AMMO PAK OPTION See Fig 3.0 for 2 Ammo Pack Options E 2,000 D27Z Ammo M 2,000 D74Z P 2,000 D75Z Unit weight = 0.22 gm Reel weight with components = 1.04 kg Ammo weight with components = 1.02 kg Max quantity per intermediate box = 10,000 units 327mm x 158mm x 135mm Immediate Box ustomized 5 Ammo boxes per Intermediate Box F63TNR 333mm x 231mm x 183mm Intermediate Box FSINT ustomized (TO-92) BULK PAKING INFORMATION EOL ODE DESRIPTION LEADLIP DIMENSION QUANTITY J18Z TO-18 OPTION STD NO LEAD LIP 2.0 K / BOX J05Z TO-5 OPTION STD NO LEAD LIP 1.5 K / BOX NO EOL TO-92 STANDARD ODE STRAIGHT FOR: PKG 92, NO LEADLIP 2.0 K / BOX 94 (NON PROELETRON SERIES), 96 L34Z TO-92 STANDARD STRAIGHT FOR: PKG 94 NO LEADLIP 2.0 K / BOX (PROELETRON SERIES BXXX, BFXXX, BSRXXX), 97, 98 BULK OPTION See Bulk Packing Information table FSINT 2000 units per EO70 box for std option Anti-static Bubble Sheets 114mm x 102mm x 51mm Immediate Box 5 EO70 boxes per intermediate Box 530mm x 130mm x 83mm Intermediate box ustomized FSINT 10,000 units maximum per intermediate box for std option 4

5 TO-92 Tape and Reel Data, continued TO-92 Reeling Style onfiguration: Figure 2.0 Machine Option A (H) Machine Option E (J) Style A, D26Z, D70Z (s/h) Style E, D27Z, D71Z (s/h) TO-92 Radial Ammo Packaging onfiguration: Figure 3.0 FIRST WIRE OFF IS OLLETOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM ORDER STYLE D74Z (M) ORDER STYLE D75Z (P) FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM FIRST WIRE OFF IS OLLETOR (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP 5

6 TO-92 Tape and Reel Data, continued TO-92 Tape and Reel Taping Dimension onfiguration: Figure 4.0 P Pd Hd b Ha H1 HO L1 d L S W1 WO W2 t W t1 P1 F1 P2 DO ITEM DESRIPTION SYMBOL DIMENSION PO Base of Package to Lead Bend b (max) User Direction of Feed omponent Height Lead linch Height Ha HO (+/ ) (+/ ) omponent Base Height H (+/ ) omponent Alignment ( side/side ) Pd (max) omponent Alignment ( front/back ) Hd (max) omponent Pitch P (+/ ) Feed Hole Pitch PO (+/ ) Hole enter to First Lead P (+0.009, ) Hole enter to omponent enter P (+/ ) Lead Spread F1/F (+/ ) Lead Thickness d (+0.002, ) ut Lead Length L (max) Taped Lead Length L (+0.051, ) Taped Lead Thickness t (+/ ) arrier Tape Thickness t (+/ ) TO-92 Reel onfiguration: Figure 5.0 arrier Tape Width Hold - down Tape Width Hold - down Tape position Feed Hole Position W WO W1 W (+0.020, ) (+/ ) (max) (+/ ) Sprocket Hole Diameter DO (+0.008, ) Lead Spring Out S (max) Note : All dimensions are in inches. ELETROSTATI SENSITIVE DEVIES D4 D1 ITEM DESRIPTION SYSMBOL MINIMUM MAXIMUM F63TNR ustomized D2 Reel Diameter D Arbor Hole Diameter (Standard) D (Small Hole) D ore Diameter D Hub Recess Inner Diameter D Hub Recess Depth W W2 W1 W3 Flange to Flange Inner Width W Hub to Hub enter Width W Note: All dimensions are inches D3 6

7 TO-92 Package Dimensions TO-92 (FS PKG ode 92, 94, 96) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram):

8 SOT-23 Tape and Reel Data SOT-23 Packaging onfiguration: Figure 1.0 ustomized Human Readable Antistatic over Tape Embossed arrier Tape Packaging Description: SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table. These full reels are individually labeled and placed inside a standard intermediate made of recyclable corrugated brown paper with a ON Semiconductor logo printing. One pizza box contains eight reels maximum. And these intermediate boxes are placed inside a labeled shipping box which comes in different sizes depending on the number of parts shipped. 3P 3P 3P 3P SOT-23 Packaging Information Packaging Option Standard (no flow code) D87Z Packaging type Qty per Reel/Tube/Bag TNR 3,000 TNR 10,000 Reel Size 7" Dia 13" Box Dimension (mm) 187x107x x343x64 Max qty per Box 24,000 30,000 Weight per unit (gm) Weight per Reel (kg) mm x 342mm x 64mm Intermediate box for L87Z Option SOT-23 Unit Orientation Human Readable Note/omments Human Readable sample SOT-23 Tape Leader and Trailer onfiguration: Figure 2.0 Human readable 187mm x 107mm x 183mm Intermediate Box for Standard Option arrier Tape over Tape Trailer Tape 300mm minimum or 75 empty pockets omponents Leader Tape 500mm minimum or 125 empty pockets 8

9 SOT-23 Tape and Reel Data, continued SOT-23 Embossed arrier Tape onfiguration: Figure 3.0 T P0 P2 D0 D1 E1 B0 Wc F E2 W Tc K0 P1 A0 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc SOT-23 (8mm) / / / / / / min / / / / / / /-0.02 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and ). 20 deg maximum 0.5mm maximum B0 Typical component cavity center line 0.5mm maximum 20 deg maximum component rotation Sketch A (Side or Front Sectional View) omponent Rotation SOT-23 Reel onfiguration: Figure 4.0 A0 Sketch B (Top View) omponent Rotation Typical component center line Sketch (Top View) omponent lateral movement W1 Measured at Hub Dim A Max Dim A max Dim N 7" Diameter Option See detail AA B Min Dim See detail AA W3 Dim D min 13" Diameter Option W2 max Measured at Hub DETAIL AA Tape Size Reel Option Dimensions are in inches and millimeters Dim A Dim B Dim Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL) 8mm 7" Dia / / / / mm 13" Dia / / / /

10 SOT-23 Package Dimensions SOT-23 (FS PKG ode 49) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram):

11 ON Semiconductor and are trademarks of Semiconductor omponents Industries, LL dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor s product/patent coverage may be accessed at /site/pdf/patent Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA lass 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLIATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution enter for ON Semiconductor E. 32nd Pkwy, Aurora, olorado USA Phone: or Toll Free USA/anada Fax: or Toll Free USA/anada orderlit@onsemi.com Semiconductor omponents Industries, LL N. American Technical Support: Toll Free USA/anada Europe, Middle East and Africa Technical Support: Phone: Japan ustomer Focus enter Phone: ON Semiconductor Website: Order Literature: For additional information, please contact your local Sales Representative

E C E B. TO-92 SOT-23 Mark: 3D. TA = 25 C unless otherwise noted. Symbol Parameter Value Units

E C E B. TO-92 SOT-23 Mark: 3D. TA = 25 C unless otherwise noted. Symbol Parameter Value Units MPSH81 MMBTH81 MPSH81 / MMBTH81 E E B TO-92 SOT-23 Mark: 3D B PNP RF Transistor This device is designed for general RF amplifier and mixer applications to 250 mhz with collector currents in the 1.0 ma