MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier
|
|
- Rhoda Campbell
- 6 years ago
- Views:
Transcription
1 MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier Description This device is designed for general purpose amplifier applications at collector currents to 300mA. Sourced from Process 73 Absolute Maximum Ratings* T A = 25 C unless otherwise specified. *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Notes: February 2006 Parameter Symbol Value Unit Collector-Emitter Voltage V CES -80 V Collector-Base Voltage V CBO -80 V Emitter-Base Voltage V EBO -4.0 V Collector Current Continuous I C -500 ma Operating and Storage Junction Temperature Range T J, T STG -55 to +150 C 1. These ratings are based on a maximum junction temperature of 150 C. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3. All voltages (V) and currents (A) are negative polarity for PNP transistors. Thermal Characteristics T A = 25 C unless otherwise noted. Characteristic Total Device Dissipation, Derate above 25 C Symbol P D Max MPSA56 *MMBTA56 **PZTA56 *Device mounted on FR-4 PCB 1.6" x 1.6" x 0.06." **Device mounted on FR-4 PCB 36mm x 18mm x 1.5mm; mounting pad for the collector lead min. 6 cm , Units mw mw/ C Thermal Resistance, Junction to Case R θjc 83.3 C/W Thermal Resistance, Junction to Ambient R θja C/W Packages MPSA56 MMBTA56 PZTA56 C C C B E TO-92 SOT-23 Mark: 2G B E SOT-223 B C E 2006 Fairchild Semiconductor Corporation 1
2 Electrical Characteristics T A = 25 C unless otherwise specified. OFF CHARACTERISTICS *Pulse Test: Pulse Width 300µs, Duty Cycle 2.0% Note: All voltages (V) and currents (A) are negative polarity for PNP transistors. Spice Model Parameter Symbol Test Condition Min. Max. Units Collector-Emitter Breakdown Voltage* V (BR)CEO I C = -1.0mA, I B = 0-80 V Collector-Base Breakdown Voltage V (BR)CBO I C = -100µA, I E = 0-80 V Emitter-Base Breakdown Voltage V (BR)EBO I E = -100µA, I C = V Collector-Cutoff Current I CEO V CE = -60V, I B = µa Collector-Cutoff Current I CBO V CB = -80V, I E = µa ON CHARACTERISTICS DC Current Gain h FE I C = -10mA, V CE = -1.0V I C = -100mA, V CE = -1.0V Collector-Emitter Saturation Voltage V CE(sat) I C = -100mA, I B = -10mA -0.2 V Base-Emitter On Voltage V BE(on) I C = -100mA, V CE = -1.0V -1.2 V SMALL SIGNAL CHARACTERISTICS Current Gain Bandwidth Product f T I C = -100mA, V CE = -1.0V, f = 100MHz PNP (Is=12.27p Xti=3 Eg=1.11 Vaf=100 Bf=91.63 Ne=1.531 Ise=12.27p Ikf=1.009 Xtb=1.5 Br=1.287 Nc=2 Isc=0 Ikr=0 Rc=.6 Cjc=48.28p Mjc=.5615 Vjc=.75 Fc=.5 Cje=106.7p Mje=.5168 Vje=.75 Tr=496.3n Tf=865.8p Itf=.2 Vtf=2 Xtf=.8 Rb=10) MHz 2
3 Typical Characteristics h - TYPICAL PULSED CURRENT GAIN FE V - BASE EMITTER VOLTAGE (V) BESAT Typical Pulsed Current Gain vs Collector Curren Base-Emitter Saturation Voltage vs Collector Current β = C I - COLLECTOR CURRE NT (ma) C 25 C 125 C 25 C - 40 C 125 C V = -1V CE I C - COLLECTOR CURRENT (A) V - COLLECTOR EMITTER VOLTAGE (V) V - BASE EMITTER ON VOLTAGE (V) CESAT BE( ON) Collector-Emitter Saturation Voltage vs Collector Current β = I - COLLECTOR CURRE NT (ma) Base Emitter ON Voltage vs Collector Current V = -1V CE I - COLLECTOR CURRE NT (ma) C C - 40 C 25 C - 40 C 125 C 25 C 125 C I - COLLECTOR CURRENT (na) CBO Collector-Cutoff Current vs Ambient Temperature V = -60V CB T - AMBIENT TEMPERATURE ( C) A CAPACITANCE (pf) 100 Input and Output Capacitance vs Reverse Voltage f = 1.0 MHz C ib C ob V CE - COLLECTOR VOLTAGE (V) 3
4 Typical Characteristics (Continued) V CE - COLLECTOR-EMITTER VOLTAGE (V) I = Collector Saturation Region -1mA -10mA I B- BASE CURRENT (µ A) P - POWER DISSIPATION (W) D mA TO-92 SOT-23 T A = 25 C f - GAIN BANDWIDTH PRODUCT (MHz) T Power Dissipation vs Ambient Temperature SOT Gain Bandwidth Product vs Collector Current V = -5V CE I C - COLLECTOR CURRENT (ma) TEMPERATURE ( oc) 4
5 TO-92 Tape and Reel Data TO-92 Packaging Configuration: Figure 1.0 FSCINT sample FAIRCHILD SEMICONDUCTOR CORPORATION HTB:B LOT: CBVK741B019 QTY: NSID: PN2222N D/C1: D9842 SPEC REV: B2 F63TNR sample LOT: CBVK741B019 FSID: PN222N QA REV: SPEC: QTY: 2000 SPEC: D/C1: D9842 QTY1: SPEC REV: D/C2: QTY2: CPN: N/F: F (FSCINT) (F63TNR)3 TO-92 TNR/AMMO PACKING INFROMATION Packing Style Quantity EOL code Reel A 2,000 D26Z E 2,000 D27Z Ammo M 2,000 D74Z P 2,000 D75Z Unit weight = 0.22 gm Reel weight with components = 1.04 kg Ammo weight with components = 1.02 kg Max quantity per intermediate box = 10,000 units 327mm x 158mm x 135mm Immediate Box Customized TAPE and REEL OPTION See Fig 2.0 for various Reeling Styles 5 Reels per Intermediate Box F63TNR Customized AMMO PACK OPTION See Fig 3.0 for 2 Ammo Pack Options 5 Ammo boxes per Intermediate Box F63TNR 375mm x 267mm x 375mm Intermediate Box 333mm x 231mm x 183mm Intermediate Box FSCINT Customized FSCINT Customized (TO-92) BULK PACKING INFORMATION EOL CODE DESCRIPTION LEADCLIP DIMENSION QUANTITY J18Z TO-18 OPTION STD NO LEAD CLIP 2.0 K / BOX J05Z TO-5 OPTION STD NO LEAD CLIP 1.5 K / BOX NO EOL CODE L34Z TO-92 STANDARD STRAIGHT FOR: PKG 92, 94 (NON PROELECTRON SERIES), 96 TO-92 STANDARD STRAIGHT FOR: PKG 94 (PROELECTRON SERIES BCXXX, BFXXX, BSRXXX), 97, 98 NO LEADCLIP NO LEADCLIP 2.0 K / BOX 2.0 K / BOX BULK OPTION See Bulk Packing Information table FSCINT 2000 units per EO70 box for std option Anti-static Bubble Sheets 114mm x 102mm x 51mm Immediate Box 5 EO70 boxes per intermediate Box 530mm x 130mm x 83mm Intermediate box Customized FSCINT 10,000 units maximum per intermediate box for std option 5
6 TO-92 Tape and Reel Data (Continued) TO-92 Reeling Style Configuration: Figure 2.0 Machine Option A (H) Style A, D26Z, D70Z (s/h) TO-92 Radial Ammo Packaging Configuration: Figure 3.0 FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP Machine Option E (J) Style E, D27Z, D71Z (s/h) FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM ORDER STYLE D74Z (M) ORDER STYLE D75Z (P) FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP 6
7 TO-92 Tape and Reel Data (Continued) TO-92 Tape and Reel Taping Dimension Configuration: Figure 4.0 Ha H1 HO P P1 F1 P2 PO User Direction of Feed Pd b L1 d DO L Hd W1 S WO t W2 W t1 ITEM DESCRIPTION Base of Package to Lead Bend Component Height Lead Clinch Height Component Base Height Component Alignment ( side/side ) Component Alignment ( front/back ) Component Pitch Feed Hole Pitch Hole Center to First Lead SYMBOL b Ha HO H1 Pd Hd P PO P1 DIMENSION (max) (+/ ) (+/ ) (+/ ) (max) (max) (+/ ) (+/ ) (+0.009, ) Hole Center to Component Center P (+/ ) Lead Spread F1/F (+/ ) Lead Thickness d (+0.002, ) Cut Lead Length L (max) Taped Lead Length L (+0.051, ) Taped Lead Thickness t (+/ ) Carrier Tape Thickness t (+/ ) TO-92 Reel Configuration: Figure 5.0 Carrier Tape Width Hold - down Tape Width Hold - down Tape position Feed Hole Position W WO W1 W (+0.020, ) (+/ ) (max) (+/ ) Sprocket Hole Diameter DO (+0.008, ) Lead Spring Out S (max) Note : All dimensions are in inches. ELECTROSTATIC SENSITIVE DEVICES D4 D1 ITEM DESCRIPTION SYSMBOL MINIMUM MAXIMUM F63TNR Customized D2 Reel Diameter D Arbor Hole Diameter (Standard) D (Small Hole) D Core Diameter D Hub Recess Inner Diameter D Hub Recess Depth W W2 W1 W3 Flange to Flange Inner Width W Hub to Hub Center Width W Note: All dimensions are inches D3 7
8 TO-92 Package Dimensions TO-92 (FS PKG Code 92, 94, 96) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram):
9 SOT-23 Tape and Reel Data SOT-23 Packaging Configuration: Figure 1.0 Packaging Option Packaging type Reel Size SOT-23 Packaging Information Standard (no flow code) TNR 7" Dia D87Z TNR Qty per Reel/Tube/Bag 3,000 10,000 13" Box Dimension (mm) 187x107x x343x64 Max qty per Box 24,000 30,000 Weight per unit (gm) Weight per Reel (kg) Customized Human Readable Antistatic Cover Tape Embossed Carrier Tape 343mm x 342mm x 64mm Intermediate box for L87Z Option Packaging Description: SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesi ve layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table. These full reel s are individually labeled and placed inside a standard intermediate made of recyclable corrugated brown paper with a Fairchild logo printing. One pizza box contains eight reels maximum. And these intermediate boxes are placed inside a labeled shipping box which comes in different sizes depending on the number of parts shi pped. 3P 3P 3P 3P SOT-23 Unit Orientation Human Readable Note/Comments Human Readable sample SOT-23 Tape Leader and Trailer Configuration: Figure 2.0 Human readable 187mm x 107mm x 183mm Intermediate Box for Standard Option Carrier Tape Cover Tape Trailer Tape 300mm minimum or 75 empty pockets Components Leader Tape 500mm minimum or 125 empty pockets 9
10 SOT-23 Tape and Reel Data (Continued) SOT-23 Embossed Carrier Tape Configuration: Figure 3.0 B0 Dimensions are in millimeter Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc SOT-23 (8mm) T Tc K0 Wc / / / min /-0.05 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 20 deg maximum component rotation Sketch A (Side or Front Sectional View) Component Rotation SOT-23 Reel Configuration: Figure 4.0 P0 P1 P2 B0 A0 D0 User Direction of Feed A0 D / deg maximum Sketch B (Top View) Component Rotation Typical component cavity center line Typical component center line 4.0 +/ E1 F W E2 0.5mm maximum / / mm maximum Sketch C (Top View) Component lateral movement /-0.02 W1 Measured at Hub Dim A Max Dim A max Dim N 7" Diameter Option See detail AA B Min Dim C See detail AA W3 Dim D min 13" Diameter Option W2 max Measured at Hub DETAIL AA Tape Size Reel Option Dimensions are in inches and millimeters Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL) 8mm 7" Dia / / / / mm 13" Dia / / / /
11 SOT-23 Package Dimensions SOT-23 (FS PKG Code 49) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram):
12 SOT-223 Tape and Reel Data SOT-223 Packaging Configuration: Figure 1.0 Packaging Option Packaging type Reel Size SOT-223 Packaging Information Standard (no flow code) TNR 13" Dia D84Z TNR Qty per Reel/Tube/Bag 2, " Dia Box Dimension (mm) 343x64x x187x47 Max qty per Box 5,000 1,000 Weight per unit (gm) Weight per Reel (kg) Customized F63TNR Antistatic Cover Tape Static Dissipative Embossed Carrier Tape F F mm x 342mm x 64mm Intermediate box for Standard Packaging Description: SOT-223 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2,500 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or 177cm diameter reel. This and some other options are further described in the Packaging Information table. These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains two reels maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. F SOT-223 Unit Orientation F F63TNR Note/Comments 184mm x 184mm x 47mm Pizza Box for D84Z Option F63TNR F63TNR sample LOT: CBVK741B019 QTY: 3000 SOT-223 Tape Leader and Trailer Configuration: Figure 2.0 FSID: PN2222A SPEC: D/C1: D9842 QTY1: SPEC REV: D/C2: QTY2: CPN: N/F: F (F63TNR)3 Carrier Tape Cover Tape Trailer Tape 300mm minimum or 38 empty pockets Components Leader Tape 500mm minimum or 62 empty pockets 12
13 SOT-223 Tape and Reel Data (Continued) SOT-223 Embossed Carrier Tape Configuration: Figure 3.0 T K0 Tc Dimensions are in millimeter Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc SOT-223 (12mm) Wc 6.83 B / / min /-0.05 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). A0 20 deg maximum component rotation Sketch A (Side or Front Sectional View) Component Rotation SOT-223 Reel Configuration: Figure 4.0 P0 P1 D0 D1 User Direction of Feed B0 A / deg maximum Sketch B (Top View) Component Rotation Typical component cavity center line Typical component center line 4.0 +/ F 0.5mm maximum E1 E / W 9.5 +/ mm maximum Sketch C (Top View) Component lateral movement /-0.02 W1 Measured at Hub Dim A Max Dim A max Dim N 7" Diameter Option See detail AA B Min Dim C See detail AA W3 Dim D min 13" Diameter Option W2 max Measured at Hub DETAIL AA Tape Size Reel Option Dimensions are in inches and millimeters Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL) 12mm 7" Dia / / / / mm 13" Dia / / / /
14 SOT-223 Package Dimensions SOT-223 (FS PKG Code 47) 1 : 1 Scale 1:1 on letter size paper Part Weight per unit (gram):
15 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx FAST ActiveArray FASTr Bottomless FPS Build it Now FRFET CoolFET GlobalOptoisolator CROSSVOLT GTO DOME HiSeC EcoSPARK I 2 C E 2 CMOS i-lo EnSigna ImpliedDisconnect FACT IntelliMAX FACT Quiet Series Across the board. Around the world. The Power Franchise Programmable Active Droop DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS ISOPLANAR LittleFET MICROCOUPLER MicroFET MicroPak MICROWIRE MSX MSXPro OCX OCXPro OPTOLOGIC OPTOPLANAR PACMAN POP Power247 PowerEdge PowerSaver PowerTrench QFET QS QT Optoelectronics Quiet Series RapidConfigure RapidConnect µserdes ScalarPump SILENT SWITCHER SMART START SPM Stealth SuperFET SuperSOT -3 SuperSOT -6 SuperSOT -8 SyncFET TCM TinyLogic TINYOPTO TruTranslation UHC UltraFET UniFET VCX Wire 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Definition of Terms Datasheet Identification Product Status Definition Advance Information Preliminary No Identification Needed Formative or In Design First Production Full Production This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I
SuperSOT-3 Mark: 3SS. TA = 25 C unless otherwise noted. Symbol Parameter Value Units
C B E MPSA28 TO-92 MMBTA28 C SuperSOT-3 Mark: 3SS B E PZTA28 C C B SOT-223 E MPSA28 / MMBTA28 / PZTA28 NPN Darlington Transistor This device is designed for applications requiring extremely high current
More informationTA = 25 C unless otherwise noted. Symbol Parameter Value Units
PN3563 PN3563 C B E TO-92 NPN RF Amplifier This device is designed for use as RF amplifiers, oscillators and multipliers with collector currents in the 1.0 ma to 30 ma range. Sourced from Process 43. See
More informationTA = 25 C unless otherwise noted. Symbol Parameter Value Units
Discrete POWER & Signal Technologies C B E TO-92 NPN Darlington Transistor This device is designed for applications requiring extremely high current gain at currents to 1.0 A. Sourced from Process 05.
More informationSOT-23 Mark: 1D. TA = 25 C unless otherwise noted. Symbol Parameter Value Units
C B E MPSA42 TO-92 MMBTA42 C SOT-23 Mark: 1D B E PZTA42 C C B SOT-223 E MPSA42 / MMBTA42 / PZTA42 NPN High Voltage Amplifier This device is designed for application as a video output to drive color CRT
More informationSOT-23 Mark: 1D. TA = 25 C unless otherwise noted. Symbol Parameter Value Units
C B E MPSA42 TO-92 MMBTA42 C SOT-23 Mark: 1D B E PZTA42 C C B SOT-223 E MPSA42 / MMBTA42 / PZTA42 NPN High Voltage Amplifier This device is designed for application as a video output to drive color CRT
More informationTA = 25 C unless otherwise noted. Symbol Parameter Value Units
C B E PN2 PN2A TO-92 PNP General Purpose Amplifier This device is designed for general purpose amplifier applications at collector currents to 3 ma. Sourced from Process 68. MMBT2 MMBT2A C SOT-23 Mark:
More informationTA = 25 C unless otherwise noted. Symbol Parameter Value Units
Discrete POWER & Signal Technologies C B E TO-92 NPN Switching Transistor This device is designed for high speed saturated switching applications at currents to 100 ma. Sourced from Process 21. See PN2369A
More informationTA = 25 C unless otherwise noted. Symbol Parameter Value Units
G S D J201 J202 TO-92 N-Channel General Purpose Amplifier MMBFJ201 MMBFJ202 G SOT-23 Mark: 62P / 62Q D S NOTE: Source & Drain are interchangeable J201 / J202 / MMBFJ201 / MMBFJ202 This device is designed
More informationBC547 BC547A BC547B BC547C
BC547 BC547A BC547B BC547C BC547 / BC547A / BC547B / BC547C E B C TO-92 NPN General Purpose Amplifier This device is designed for use as general purpose amplifiers and switches requiring collector currents
More informationTA = 25 C unless otherwise noted. Symbol Parameter Value Units
PN5432 PN PN PN5432 / PN / PN G S D TO-92 N-Channel Switch This device is designed for analog or digital switching applications where very low On Resistance is mandatory. Sourced from Process 58. See J108
More informationE C B E. TO-92 SOT-23 Mark: 2T. TA = 25 C unless otherwise noted. Symbol Parameter Value Units
2N443 MMBT443 C 2N443 / MMBT443 E C B E TO-92 SOT-23 Mark: 2T B PNP General Purpose Amplifier This device is designed for use as a general purpose amplifier and switch requiring collector currents to 5
More informationTA = 25 C unless otherwise noted. Symbol Parameter Value Units
Discrete POWER & Signal Technologies C B E TO-92 PNP General Purpose Amplifier This device is designed for use as general purpose amplifiers and switches requiring collector currents to 100 ma. Sourced
More informationTO-92 SOT-23 Mark: 3R. TA = 25 C unless otherwise noted. Symbol Parameter Value Units
2N5771 MMBT5771 C 2N5771 / MMBT5771 C B E TO-92 SOT-23 Mark: 3R B E PNP Switching Transistor This device is designed for very high speed saturated switching at collector currents to 100 ma. Sourced from
More informationTYPE NPN PNP. TA = 25 C unless otherwise noted. Symbol Parameter Value Units
E B E B E B E B 4 3 3 4 2 1 2 1 C C C C C C C C 4 2 3 3 4 2 1 1 SOIC-16 TRANSISTOR OR TYPE C 1 B 1 E 1 & C 2 B 2 E 2 C 3 B 3 E 3 & C 4 B 4 E 4 NPN PNP Quad NPN & PNP General Purpose Amplifier These complimentary
More informationE C B E. TO-92 SOT-23 Mark: 2X. TA = 25 C unless otherwise noted. Symbol Parameter Value Units
2N441 MMBT441 C 2N441 / MMBT441 E C B E TO-92 SOT-23 Mark: 2X B NPN General Pupose Amplifier This device is designed for use as a medium power amplifier and switch requiring collector currents up to 5
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. PN4355 MMBT4355 C PN4355 / MMBT4355 E C B E TO-92 SOT-23 Mark: 81 B PNP
More informationB E. SOT-23 Mark: 3C. TA = 25 C unless otherwise noted. Symbol Parameter Value Units
MPS5179 C TO-92 B E MMBT5179 C SOT-23 Mark: 3C B E C E B PN5179 TO-92 MPS5179 / MMBT5179 / PN5179 NPN RF Transistor This device is designed for use in low noise UHF/VHF amplifiers with collector currents
More informationE C E B. TO-92 SOT-23 Mark: 3D. TA = 25 C unless otherwise noted. Symbol Parameter Value Units
MPSH81 MMBTH81 C MPSH81 / MMBTH81 E C E B TO-92 SOT-23 Mark: 3D B PNP RF Transistor This device is designed for general RF amplifier and mixer applications to 250 mhz with collector currents in the 1.0
More information2N5551- MMBT5551 NPN General Purpose Amplifier
2N5551- MMBT5551 NPN General Purpose Amplifier Features This device is designed for general purpose high voltage amplifiers and gas discharge display drivers. Suffix -C means Center Collector in 2N5551
More informationSOT-23 Mark: 6U / 6T. TA = 25 C unless otherwise noted. Symbol Parameter Value Units
G S D J309 J310 TO-92 N-Channel RF Amplifier MMBFJ309 MMBFJ310 G SOT-23 Mark: 6U / 6T D S NOTE: Source & Drain are interchangeable J309 / J310 / MMBFJ309 / MMBFJ310 This device is designed for VHF/UHF
More informationTA = 25 C unless otherwise noted. Symbol Parameter Value Units
G S D J111 J112 J113 N-Channel Switch TO-92 This device is designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers. Sourced from Process 1. Absolute Maximum
More informationKSC2881 NPN Epitaxial Silicon Transistor
KSC288 NPN Epitaxial Silicon Transistor Power Amplifier Collector-Emitter Voltage : O =20V Current Gain Bandwidth Productor : f T =20MHz Collector Dissipation : P C =~2W in Mounted on Ceramic Board Complement
More informationFJC1386 PNP Epitaxial Silicon Transistor FJC1386 PNP Epitaxial Silicon Transistor
FJC1386 PNP Epitaxial Silicon Transistor Low Saturation Transistor Medium Power Amplifier Complement to FJC2098 High Collector Current Low Collector-Emitter Saturation Voltage Marking 1 3 8 6 July 2005
More informationTO-92 SOT-23 Mark: 3B. TA = 25 C unless otherwise noted. Symbol Parameter Value Units
PN918 MMBT918 PN918 / MMBT918 C C B E TO-92 SOT-23 Mark: 3B B E NPN RF Transistor This device is designed for use as RF amplifiers, oscillators and multipliers with collector currents in the 1. ma to 3
More informationSOT-23 MARK: U92. Absolute Maximum Ratings *T a = 25 C unless otherwise noted Symbol Parameter Value Units
BSR17A NPN General Purpose Amplifier C B E June 2007 NPN General Purpose Amplifier SOT-23 MARK: U92 Features This device is designed as a general purpose amplifier and switch. The useful dynamic range
More informationKSB798 PNP Epitaxial Silicon Transistor
KSB798 PNP Epitaxial Silicon Transistor Audio Frequency Power Amplifier Collector Current : I C = -A Collector Power Dissipation : P C = 2W Marking 7 9 8 P Y W W July 2005 SOT-89. Base 2. Collector 3.
More informationMPSW01 NPN General Purpose Amplifier
MPSW01 NPN General Purpose Amplifier Features This device is designed for general purpose medium power amplifiers Sourced from process 37 Absolute Maximum Ratings * T a = 25 C unless otherwise noted *
More informationTA = 25 C unless otherwise noted. Symbol Parameter Value Units
BP52 BP52 SOT-223 B E PNP General Purpose Amplifier This device is designed for general purpose medium power amplifiers and switching circuits requiring collector currents to 1. A. Sourced from Process
More informationFJN965 FJN965. NPN Epitaxial Silicon Transistor
For Output Amplifier of Electronic Flash Unit Low Collector-Emitter Saturation Voltage High Performance at Low Supply Voltage TO-92. Emitter 2. Collector 3. Base NPN Epitaxial Silicon Transistor Absolute
More informationBAV23S Small Signal Diode
BAV2S Small Signal Diode 2 L0 September 2006 tm Connection Diagram 1 1 2 SOT-2 1 2 Absolute Maximum Ratings * T a = 25 C unless otherwise noted Symbol Parameter Value Unit V RRM Maximum Repetitive Reverse
More informationTA = 25 C unless otherwise noted. Symbol Parameter Value Units
BV26 BV26 E SOT-23 Mark: FD B PNP Darlington Transistor This device is designed for applications requiring extremely high current gain at currents to 8 ma. Sourced from Process 61. Absolute Maximum Ratings*
More informationDistributed by: www.jameco.com -8-8-4242 The content and copyrights of the attached material are the property of its owner. Connection Diagram 448 448SE SOT-2 2 5H MARKING MMBD448 5H MMBD448CA MMBD448CC
More informationFJE3303 High Voltage Fast-Switching NPN Power Transistor
FJE3303 High oltage Fast-Switching NPN Power Transistor High oltage Capability High Switching Speed Suitable for Electronic Ballast and Switching Regulator TO-26. Emitter 2.Collector 3.Base Absolute Maximum
More informationKSA1013 KSA1013 PNP EPITAXIAL SILICON TRANSISTOR. Color TV Audio Output Color TV Vertical Deflection Output
KSA03 KSA03 Color TV Audio Output Color TV Vertical Deflection Output TO-92L. Emitter 2. Collector 3. Base PNP EPITAXIAL SILICON TRANSISTOR Absolute Maximum Ratings T a =25 C unless otherwise noted Symbol
More informationKSC1845. h FE2 V CE =6V, I C =1mA. Classification P F E U h FE2 200 ~ ~ ~ ~ 1200
KSC845 KSC845 Audio Frequency Low Noise Amplifier Complement to KSA992 TO-92. Emitter 2. Collector 3. Base NPN Epitaxial Silicon Transistor Absolute Maximum Ratings T a =25 C unless otherwise noted Symbol
More informationMMBT2369 / PN2369 NPN Switching Transistor
MMBT2369 / PN2369 NPN Switching Transistor This device is designed for high speed saturated switching at collector currents of 10mA to 100mA. Sourced from process 21. MMBT2369 C B E SOT-23 Mark: 1J PN2369
More informationKSP10 KSP10. NPN Epitaxial Silicon Transistor. VHF/UHF transistor. Absolute Maximum Ratings T a =25 C unless otherwise noted
KSP KSP VHF/UHF transistor NPN Epitaxial Silicon Transistor TO-9. Base. Emitter. Collector Absolute Maximum Ratings T a =5 C unless otherwise noted Symbol Parameter Value Units V CBO Collector-Base Voltage
More informationFDN359BN N-Channel Logic Level PowerTrench TM MOSFET
N-Channel Logic Level PowerTrench TM MOSFET January 26 General Description This N-Channel Logic Level MOSFET is produced using Fairchild s Semiconductor s advanced PowerTrench process that has been especially
More informationKSP13/14. V CE =5V, I C =10mA
KSP3/4 KSP3/4 Darlington Transistor Collector-Emitter Voltage: V CES =30V Collector Power Dissipation: P C (max)=625mw TO-92. Emitter 2. Base 3. Collector NPN Epitaxial Silicon Darlington Transistor Absolute
More informationKSP42/43. Symbol Parameter Value Units V CBO V V V CEO
High oltage Transistor Collector-Emitter oltage: CEO =KSP42: KSP43: Collector Power Dissipation: P C (max)=625mw NPN Epitaxial Silicon Transistor TO-92. Emitter 2. Base 3. Collector Absolute Maximum Ratings
More informationFJP5027 FJP5027. NPN Silicon Transistor. High Voltage and High Reliability High Speed Switching Wide SOA
High Voltage and High Reliability High Speed Switching Wide SOA TO-220.Base 2.Collector 3.Emitter NPN Silicon Transistor Absolute Maximum Ratings =25 C unless otherwise noted Symbol Parameter Value Units
More informationKSH112 KSH112. NPN Silicon Darlington Transistor
D-PAK for Surface Mount Applications High DC Current Gain Built-in a Damper Diode at E-C Lead Formed for Surface Mount Applications (No Suffix) Straight Lead (I-PAK, - I Suffix) Electrically Similar to
More informationGENERAL PURPOSE 6-PIN PHOTODARLINGTON OPTOCOUPLERS
DESCRIPTION The 4N29, 4N30, 4N3, 4N32, 4N33 have a gallium arsenide infrared emitter optically coupled to a silicon planar photodarlington. 4N29 4N30 4N3 4N32 4N33 FEATURES High sensitivity to low input
More information6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
-PIN PHOTOTRANSISTOR CNX8A.W,, SL8.W & DESCRIPTION The CNX8A.W,, SL8.W AND, consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a -pin dual in-line package. PACKAGE
More informationDescription. TO-220 FCP Series. Symbol Parameter FDP61N20 Unit. Maximum Lead Temperature for Soldering Purpose, 300 C 1/8 from Case for 5 Seconds
FDP61N20 200V N-Channel MOSFET Features 61A, 200V, R DS(on) = 0.041Ω @ = 10 V Low gate charge ( typical 58 nc) Low C rss ( typical 80 pf) Fast switching 100% avalanche tested Improved dv/dt capability
More informationGENERAL PURPOSE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
DESCRIPTION The device consists of a gallium arsenide infrared emitting diode optically coupled to a high voltage, silicon, phototransistor detector in a standard 6-pin DIP package. It is designed for
More informationNC7WZ17 TinyLogic UHS Dual Buffer with Schmitt Trigger Inputs
April 2006 NC7WZ17 TinyLogic UHS Dual Buffer with Schmitt Trigger Inputs General Description The NC7WZ17 is a dual buffer with Schmitt trigger inputs from Fairchild s Ultra High Speed Series of TinyLogic
More informationQEE213 Plastic Infrared Light Emitting Diode
QEE213 Plastic Infrared Light Emitting Diode Features Wavelength = 940 nm, GaAs Package Type: Sidelooker Medium Beam Angle, 50 Clear Plastic Package Matched Photosensors: QSE213 and QSE243 Package Dimensions
More informationFQA8N100C 1000V N-Channel MOSFET
FQA8N100C 1000V N-Channel MOSFET Features 8A, 1000V, R DS(on) = 1.45Ω @ = 10 V Low gate charge (typical 53 nc) Low C rss (typical 16 pf) Fast switching 100% avalanche tested Improved dv/dt capability Description
More informationFDMS8690 N-Channel PowerTrench MOSFET
FDMS869 N-Channel PowerTrench MOSFET 3V, 9.8A, 9mΩ General Description This device has been designed specifically to improve the efficiency of DC-DC converters. Using new techniques in MOSFET construction,
More informationMOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers
MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Features U.L. Recognized (File #E90700, Volume 2) VDE Recognized (File #13616) (add option V for VDE approval, i.e, MOCD223V-M)
More informationFeatures. 15 A, 30 V. R DS(ON) = 5.5 V GS = 10 V R DS(ON) = 8 V GS = 4.5 V. TA=25 o C unless otherwise noted
FDS776A N-Channel Logic Level PowerTrench MOSFET December 2 PRELIMINARY FDS776A General Description This N-Channel Logic Level MOSFET is produced using Fairchild Semiconductor s advanced PowerTrench process
More informationFDP75N08A 75V N-Channel MOSFET
FDP75N08A 75V N-Channel MOSFET Features 75A, 75V, R DS(on) = 0.011Ω @ = 10 V Low gate charge ( typical 145nC) Low Crss ( typical 86pF) Fast switching Improved dv/dt capability Description July 2006 UniFET
More informationDescription. TO-3P FDA Series. Symbol Parameter FDA70N20 Unit. Maximum Lead Temperature for Soldering Purpose, 300 C 1/8 from Case for 5 Seconds
FDA70N20 200V N-Channel MOSFET Features 70A, 200V, R DS(on) = 0.035Ω @ = 10 V Low gate charge ( typical 66 nc) Low C rss ( typical 89 pf) Fast switching 100% avalanche tested Improved dv/dt capability
More informationJ108/J109/J110/MMBFJ108
N-Channel Switch This device is designed for digital switching applications where very low on resistance is mandatory. Sourced from Process 8. J8/J9/J/MMBFJ8 TO-92. Drain 2. Source 3. Gate 3 2 SuperSOT-3
More informationDescription. Symbol Parameter FDAF69N25 Unit. (Note 2) Maximum Lead Temperature for Soldering Purpose, 300 C 1/8 from Case for 5 Seconds
FDAF69N25 250V N-Channel MOSFET Features 34A, 250V, R DS(on) = 0.041Ω @ = 10 V Low gate charge ( typical 77 nc) Low Crss ( typical 84 pf) Fast switching Improved dv/dt capability Description September
More informationFeatures. 15 A, 30 V. R DS(ON) = 5.5 V GS = 10 V R DS(ON) = 8 V GS = 4.5 V. TA=25 o C unless otherwise noted
FDS776A N-Channel Logic Level PowerTrench MOSFET February 2 PRELIMINARY FDS776A General Description This N-Channel Logic Level MOSFET is produced using Fairchild Semiconductor s advanced PowerTrench process
More informationSB320 - SB3100 T A. = 25 C unless otherwise noted. Symbol Parameter Value Units
SB3 - SB30 SB3-SB30 Features 3.0 ampere operation at T A = 75 C with no thermal runaway. For use in low voltage, high frequency inverters free wheeling, and polarity protection applications. DO-AD COLOR
More informationFeatures. Symbol Description FGA25N120AN Units V CES Collector-Emitter Voltage 1200 V V GES Gate-Emitter Voltage ± 20 V Collector T
FGA25N2AN General Description Employing NPT technology, Fairchild s AN series of IGBTs provides low conduction and switching losses. The AN series offers an solution for application such as induction heating
More informationMCT6, MCT61, MCT62 Dual Phototransistor Optocouplers
MCT6, MCT6, MCT62 Dual Phototransistor Optocouplers Features Two isolated channels per package Two packages fit into a 6 lead DIP socket Choice of three current transfer ratios Underwriters Laboratory
More informationFFPF20UP20DP Ultrafast Recovery Power Rectifier
FFPF20UP20DP Ultrafast Recovery Power Rectifier Features Ultrafast with Soft Recovery : < 45 (@I F = A) High Reverse Voltage : V RRM = 200V Enhanced Avalanche Energy Rated Planar Cotruction Applicatio
More informationFDS6680 Single N-Channel Logic Level PWM Optimized PowerTrench TM MOSFET
April 998 FDS668 Single N-Channel Logic Level PWM Optimized PowerTrench TM MOSFET General Description This N-Channel Logic Level MOSFET has been designed specifically to improve the overall efficiency
More informationFFA30UP20DN Ultrafast Recovery Power Rectifier
FFA3UP2DN Ultrafast Recovery Power Rectifier Features Ultrafast with Soft Recovery : < 45 (@I F = 5A) High Reverse Voltage : V RRM = 2V Avalanche Energy Rated Planar Cotruction Applicatio Output Rectifiers
More informationFJA4310. Symbol Parameter Value Units
FJA43 FJA43 Audio Power Amplifier High Current Capability : =A High Power Dissipation Wide S.O.A Complement to FJA42 TO-3P.Base 2.Collector 3.Emitter NPN Epitaxial Silicon Transistor Absolute Maximum Ratings
More informationFQPF12N60CT 600V N-Channel MOSFET
FQPF12N60CT 600V N-Channel MOSFET Features 12A, 600V, R DS(on) = 0.65Ω @ = 10 V Low gate charge ( typical 48 nc) Low Crss ( typical 21 pf) Fast switching 100% avalanche tested Improved dv/dt capability
More informationFeatures. 175 C maximum junction temperature rating. T A =25 o C unless otherwise noted
FDB62P 2V P-Channel.8V Specified PowerTrench MOSFET January 24 FDB62P General Description This P-Channel power MOSFET uses Fairchild s low voltage PowerTrench process. It has been optimized for power management
More informationFFA60UP30DN Ultrafast Recovery Power Rectifier
FFA60UP30DN Ultrafast Recovery Power Rectifier Features Ultrafast with Soft Recovery : < 55 High Reverse Voltage : V RRM = 300V Avalanche Energy Rated Planar Cotruction Applicatio General purpose Switching
More informationNDS0605 P-Channel Enhancement Mode Field Effect Transistor
NDS65 P-Channel Enhancement Mode Field Effect Transistor July NDS65 General Description These P-Channel enhancement mode field effect transistors are produced using Fairchild s proprietary, high cell density,
More informationFDD8780/FDU8780 N-Channel PowerTrench MOSFET 25V, 35A, 8.5mΩ General Description
E N FDD878/FDU878 N-Channel PowerTrench MOSFET 5V, 35A, 8.5mΩ General Description This N-Channel MOSFET has been designed specifically to improve the overall efficiency of DC/DC converters using either
More informationISL9V2540S3S EcoSPARK TM N-Channel Ignition IGBT 250mJ, 400V Features
ISL9V24S3S EcoSPARK TM N-Channel Ignition IGBT 2mJ, 4V Features! SCIS Energy = 2mJ at T J = 2 o C! Logic Level Gate Drive Applications! Automotive Ignition Coil Driver Circuits! Coil - On Plug Applications
More informationFeatures. TO-220F IRFS Series
500V N-Channel MOSFET General Description These N-Channel enhancement mode power field effect transistors are produced using Fairchild s proprietary, planar, DMOS technology. This advanced technology has
More informationFOD816 Series 4-Pin Phototransistor Optocouplers
FOD86 Series 4-Pin Phototransistor Optocouplers Features AC input response Applicable to Pb-free IR reflow soldering Compact 4-pin package High current transfer ratio: 6% minimum Safety agency approvals
More informationFDB5800 N-Channel Logic Level PowerTrench MOSFET
FDB58 N-Channel Logic Level PowerTrench MOSFET 6V, 8A, 7mΩ Features r DS(ON) = 5.5mΩ (Typ.), V GS = 5V, I D = 8A High performance trench technology for extermely low Rdson Low Gate Charge High power and
More informationFeatures. TA=25 o C unless otherwise noted
FDS669A P-Channel Logic Level PowerTrench MOSFET April 2 PRELIMINARY FDS669A General Description This P-Channel Logic Level MOSFET is produced using Fairchild Semiconductor's advanced PowerTrench process
More informationFeatures. 13 A, 30 V. R DS(ON) = 11.3 V GS = 10 V R DS(ON) = 14.4 V GS = 4.5 V. RoHS Compliant. Symbol Parameter Ratings Units
3V N-Channel Fast Switching PowerTrench MOSFET February 27 tm General Description This N-Channel MOSFET has been designed specifically to improve the overall efficiency of DC/DC converters using either
More informationFeatures. = 25 C unless otherwise noted
Dual N & P-Channel PowerTrench MOSFET October 4 General Description These dual N- and P-Channel enhancement mode power field effect transistors are produced using Fairchild Semiconductor s advanced PowerTrench
More informationFDD8782/FDU8782 N-Channel PowerTrench MOSFET 25V, 35A, 11mΩ General Description
E N FDD878/FDU878 N-Channel PowerTrench MOSFET 5V, 35A, mω General Description This N-Channel MOSFET has been designed specifically to improve the overall efficiency of DC/DC converters using either synchronous
More informationFDD8778/FDU8778 N-Channel PowerTrench MOSFET 25V, 35A, 14mΩ Features
E N FDD8778/FDU8778 N-Channel PowerTrench MOSFET 25V, 35A, 4mΩ Features Max r DS(on) = 4.mΩ at V GS = V, I D = 35A Max r DS(on) = 2.mΩ at V GS = 4.5V, I D = 33A Low gate charge: Q g(tot) = 2.6nC(Typ),
More informationFQA11N90 900V N-Channel MOSFET
FQA11N90 900V N-Channel MOSFET Features 11.4A, 900V, R DS(on) = 0.96Ω @ = 10 V Low gate charge ( typical 72 nc) Low Crss ( typical 30pF) Fast switching 100% avalanche tested Improved dv/dt capability Description
More informationN-Channel Logic Level Enhancement Mode Field Effect Transistor. Features. TA=25 o C unless otherwise noted
September BSS38 BSS38 N-Channel Logic Level Enhancement Mode Field Effect Transistor General Description These N-Channel enhancement mode field effect transistors are produced using Fairchild s proprietary,
More informationFDD V P-Channel PowerTrench MOSFET 40V, 32A, 27mΩ Features
FDD4685 V P-Channel PowerTrench MOSFET V, 3A, 7mΩ Features Max r DS(on) = 7mΩ at V GS = V, I D = 8.4A Max r DS(on) = 35mΩ at V GS = 4.5V, I D = 7A High performance trench technology for extremely low r
More informationFeatures. TA=25 o C unless otherwise noted
Dual N-Channel.V Specified PowerTrench MOSFET July 3 General Description These N-Channel.V specified MOSFETs use Fairchild Semiconductor s advanced PowerTrench process. It has been optimized for power
More informationRHRP A, 600V Hyperfast Diodes
RHRP3060 30A, 600V Hyperfast Diodes Features Hyperfast with Soft Recovery...
More informationNDT3055 N-Channel Enhancement Mode Field Effect Transistor
May 1998 NT355 N-Channel Enhancement Mode Field Effect Transistor General escription These N-Channel enhancement mode power field effect transistors are produced using Fairchild's proprietary, high cell
More informationFDB V N-Channel PowerTrench MOSFET
FDB264 200V N-Channel PowerTrench MOSFET General Description This N-Channel MOSFET is produced using Fairchild Semiconductor s advanced PowerTrench process that has been especially tailored to minimize
More informationFJL6820. Symbol Parameter Typ Max Units R θjc Thermal Resistance, Junction to Case C/W
High Voltage Color Display Horizontal Deflection Output High Collector-Base Breakdown Voltage : BV CBO = 5V Low Saturation Voltage : (sat) = 3V (Max.) For Color Monitor NPN Triple Diffused Planar Silicon
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM741 Single Operational Amplifier Features Short Circuit Protection Excellent
More informationFJN13003 FJN NPN Silicon Transistor Planar Silicon Transistor
FJN3003 FJN3003 High Voltage Switch Mode Application High Speed Switching Suitable for Electronic Ballast up to 2W NPN Silicon Transistor Planar Silicon Transistor Absolute Maximum Ratings T C =25 C unless
More informationTA = 25 C unless otherwise noted. Symbol Parameter Value Units
E SOT-23 Mark: ED B This device is designed for general purpose amplifier applications at collector currents to 5 ma. Sourced from Process 19. Absolute Maximum Ratings* TA = 25 unless otherwise noted Symbol
More informationQFET FQE10N20LC. Features. TO-126 FQE Series
200V Logic N-Channel MOSFET QFET General Description These N-Channel enhancement mode power field effect transistors are produced using Fairchild s proprietary, planar stripe, DMOS technology. This advanced
More informationFJAF6810. h FE2 V CE =5V, I C =6A. Symbol Parameter Typ Max Units R θjc Thermal Resistance, Junction to Case 2.08 C/W
FJAF68 FJAF68 High Voltage Color Display Horizontal Deflection Output High Collector-Base Breakdown Voltage : BV CBO = 5V High Switching Speed : (typ.) =.µs For Color Monitor TO-3PF.Base 2.Collector 3.Emitter
More informationFDP3651U N-Channel PowerTrench MOSFET 100V, 80A, 15mΩ Features
FDP365U N-Channel PowerTrench MOSFET V, 8A, 5mΩ Features r DS(on) =3 mω(typ.), V GS = V, I D = 4A Q g(tot) =49 nc(typ.), V GS = V Low Miller Charge Low Q rr Body Diode UIS Capability (Single Pulse/Repetitive
More informationKSA1220/1220A. Symbol Parameter Ratings Units V CBO Collector-Base Voltage : KSA1220 : KSA1220A V CEO Collector-Emitter Voltage : KSA1220 : KSA1220A
Audio Frequency Power Amplifier High Frequency Power Amplifier Complement to KSC2690/KSC2690A TO-26. Emitter 2.Collector 3.Base PNP Epitaxial Silicon Transistor Absolute Maximum Ratings T C =25 C unless
More informationFeatures. TA=25 o C unless otherwise noted
FDS667A Single N-Channel, Logic Level, PowerTrench MOSFET June 23 FDS667A General Description This N-Channel Logic Level MOSFET is produced using Fairchild Semiconductor s advanced PowerTrench process
More informationISL9R860P2, ISL9R860S2, ISL9R860S3ST
ISL9RP, ISL9RS, ISL9RS3ST A, V Stealth Diode General Description The ISL9RP, ISL9RS and ISL9RS3S are Stealth diodes optimized for low loss performance in high frequency hard switched applications. The
More informationFQP10N60C / FQPF10N60C 600V N-Channel MOSFET
FQP10N60C / FQPF10N60C 600V N-Channel MOSFET Features 9.5A, 600V, R DS(on) = 0.73Ω @ = 10 V Low gate charge ( typical 44 nc) Low Crss ( typical 18 pf) Fast switching 100% avalanche tested Improved dv/dt
More informationFeatures I-PAK (TO-251AA) TA=25 o C unless otherwise noted
FDD73BL/FDU73BL 3V N-Channel PowerTrench MOSFET General Description This N-Channel MOSFET has been designed specifically to improve the overall efficiency of DC/DC converters using either synchronous or
More informationSOT-23 Mark: 62V / 62W / 62X. TA = 25 C unless otherwise noted. Symbol Parameter Value Units
G S D J210 J211 J212 TO-92 This device is designed for HF/VHF mixer/amplifier and applications where Process 50 is not adequate. Sufficient gain and low noise for sensitive receivers. Sourced from Process
More informationFeatures. Symbol Description FGA25N120AND Units V CES Collector-Emitter Voltage 1200 V V GES Gate-Emitter Voltage ± 20 V Collector T
FGA25N2AND General Description Employing NPT technology, Fairchild s AND series of IGBTs provides low conduction and switching losses. The AND series offers an solution for application such as induction
More informationFDP79N15 / FDPF79N15 150V N-Channel MOSFET
FDP79N15 / FDPF79N15 150V N-Channel MOSFET Features 79A, 150V, R DS(on) = 0.03Ω @V GS = 10 V Low gate charge ( typical 56 nc) Low Crss ( typical 96pF) Fast switching Improved dv/dt capability Description
More information