|
|
|
- Percival Timothy Hensley
- 5 years ago
- Views:
Transcription
1 istributed by: The content and copyrights of the attached material are the property of its owner.
2 58 STNR PITN TVS RRY PPITIONS aptop omputers ellular Phones igital ameras Personal igital ssistant (P) I OMPTIIITY (N64) 642 (S): ir 5kV, ontact 8kV 644 (T): 5/5ns 645 (Surge): 24, 8/2µs evel 2(ineGnd) & evel 3(ineine) SO323 TURS Unidirectional: 5 Watts Peak Pulse Power per ine (tp = 8/2µs) idirectional Watts Peak Pulse Power per ine (tp = 8/2µs) Unidirectional & idirectional onfigurations Replacement for MV (85) Protects One Power or I/O Port S Protection > kilovolts ow lamping Voltage vailable in Multiple Voltage Types Ranging from 3V to 36V RoS ompliant MNI RTRISTIS Molded J SO323 Package Weight 5 milligrams (pproximate) vailable in eadree PureTin Plating(nnealed) Solder Reflow Temperature: PureTin Sn, : 2627 onsult actory for eaded evice vailability lammability Rating U 94V 8mm Tape and Reel Per I Standard 48 evice Marking: Marking ode & Polarity and (Unidirectional Only) PIN ONIGURTIONS UNIIRTION IIRTION R 4/7
3 VI RTRISTIS 25 Unless Otherwise Specified PRMTR SYMO VU UNITS Unidirectional Peak Pulse Power (t p = 8/2µs) See igure P PP 5 Watts idirectional Peak Pulse Power (t p = 8/2µs) See igure P PP Watts Operating Temperature Storage Temperature T T STG 55 to 5 55 to 5 TRI RTRISTIS PR 25 Unless Otherwise Specified PRT NUMR (See Notes 2) VI MRKING RT STNO VOTG MINIMUM RKOWN VOTG MPING VOTG (See ig. 2) MPING VOTG (See ig. 2) KG URRNT TYPI PITN V WM m V (R) I P = V I WM I µ Mz p PS5 PS5 PS8 PS8 PS2 PS2 PS5 PS5 PS8 PS8 PS24 PS24 PS36 G J K G N M R T Note : Part numbers with an additional suffix are bidirectional devices, i.e., PS5. Note 2: Unidirectional Only: Positive potential is applied from pin 2 to or pin 3 to R 4/7 2
4 GRPS P PP Peak Pulse urrent Watts,, IGUR PK PUS POWR VS PUS TIM W, 8/2µs Waveform 5W, 8/2µs Waveform I PP Peak Pulse urrent % of I PP t f IGUR 2 PUS WV ORM Peak Value I PP e t = t IPP /2 TST WVORM PRMTRS t f = 8µs = 2µs.,, Pulse uration µs t Time µs % Of Rated Power IGUR 3 POWR RTING URV Peak Pulse Power 8/2µs verage Power T ead Temperature 5 Volts per ivision IGUR 4 OVRSOOT & MPING VOTG OR S Test Pulse: 25 kilovolt, /3ns (waveform) IGUR 5 TYPI RVRS VOTG VS PITN OR PS5 3 apacitance p V R Reverse Voltage Volts 58.R 4/7 3
5 SO323 PKG OUTIN & IMNSIONS PKG OUTIN SO323 PKG PKG IMNSIONS MIIMTRS INS IM MIN MX MIN MX MOUNTING P NOTS.8 (3.mm). ontrolling imensions in Millimeters. 2. imensions are exclusive of mold flash and metal burrs. TP & R ORRING NOMNTUR.3 (.8mm).3 (.8mm). Surface mount product is taped and reeled in accordance with I SuffixT7 = 7 Inch Reel 3, pieces per 8mm tape, i.e., PS5T7. 3. Suffix = eadree, PureTin Plating, i.e., PS5T7. Outline & imensions: Rev 3 4/7, 6 Tape & Reel Specifications (imensions in millimeters) Reel ia. Tape Width K W P P2 P tmax 78mm (7 ) 8mm.55 ±. 2.9 ±..35 ±..5 ±..75 ±. 3.5 ±.5 8. ±.3 4. ±. 2. ±.5 4. ±..25 t P P2 Pitches umulative Tolerance on Tape. ±.2 Top cover tape K Pin Indicated by and W User irection of eed P Note: athode and for Unidirectional Parts Only OPYRIGT ProTek evices 27 SPIITIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except J). SIGN NGS: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek evices 2929 South air ane, Tempe, Z Tel: ax: Mail: sales@protekdevices.com Web Site: 58.R 4/7 4
PSR05 STEERING DIODE/TVS ARRAY COMBO APPLICATIONS IEC COMPATIBILITY (EN ) FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION SOT-143
56 PSR5 STEERIN IOE/TVS ARRA COMBO APPLICATIONS Ethernet - / Base T irewire Wireless Communications USB Interface IEC COMPATIBILIT (EN6-) 6--2 (ES): Air - 5kV, Contact - 8kV 6-- (ET): A - 5/5ns 6--5 (Surge):
CDNBS08-SLVU Low Capacitance TVS Array
*RoHS OMPLINT eatures RoHS compliant* Protects up to four I/O ports Surge protection S protection Low capacitance: 6 p pplications thernet - 1/1 ase T Personal digital assistants LN devices Instrumentation
PSR05 STEERING DIODE / TVS ARRAY COMBO APPLICATIONS. Ethernet - 10/100 Base T FireWire Wireless Communications USB Interface
56 Only One Name Means ProTek Tion PSR5 STEERIN DIODE / TVS ARRAY COMBO APPLICATIONS Ethernet - / Base T FireWire Wireless Communications USB Interface IEC COMPATIBILITY (EN6-) 6-- (ESD): Air - 5kV, Contact
SRV05-4-A ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW APAITANE STEERING DIODE/TVS ARRAY DESRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART phones,
GBLC03 - GBLC24C. This datasheet has been downloaded from at this page
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
PAM08SD23xx/C Series HIGH POWERED TVS ARRAYS DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
HIGH POWERED TVS ARRAYS DESCRIPTION The are transient voltage suppressor arrays designed for ESD protection of automotive applications. These silicon based diodes offer superior clamping voltage and performance
PAM1LIN 200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION The is an asymmetrical line protection transient voltage suppressor array, designed for local interconnect network (LIN) bus protection. This
SR2.8 - SR3.3. ultra low capacitance steering diode/tvs array. Description. applications
ultra low capacitance steering diode/tvs array Description The SR series offers two low voltage (2.8V & 3.3V) and low capacitance steering diode TVS arrays. This series is designed to protect two line
PAM02SD23xx/C Series ULTRA LOW CAPACITANCE TVS ARRAYS DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
ULTRA LOW CAPACITANCE TVS ARRAYS DESCRIPTION The are ultra low capacitance transient voltage suppressor arrays, designed to protect automotive applications. These devices are available in either a unidirectional
PSRDAxx-4A Series 500 WATT LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The are low capacitance multi-line steering diode/transient voltage suppressor arrays that provides board level protection for standard TTL
SLVDA2.8LC. 600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY Description The is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such
SMDA03LC - SMDA24LCC 500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY PIN CONFIGURATIONS
500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY Description The SMDAxxLC and SMDAxxLCC Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard
GBLC03 - GBLC24C ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
SMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
SMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
PROTETION PRODUTS Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. They are designed for
SMDB712C BIDIRECTIONAL ASYMMETRICAL TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
BIDIRECTIONAL ASYMMETRICAL TVS ARRAY DESCRIPTION The offers four individual asymmetrical devices in a SO-8 package. The device can be configured for 2 or 4 datalines depending on power level requirements.
SM10KWxxA/CA Series RTCA DO-160G COMPLIANT PRODUCT 60 KILOWATT TVS COMPONENTS DESCRIPTION DFN-2-KW PACKAGE FEATURES APPLICATIONS
60 KILOWATT TVS COMPONENTS DESCRIPTION The are high-powered surface mount transient voltage suppression components designed to protect equipment and systems from the damaging effects of high voltage spikes.
PSMDA05C-4 - PSMDA24C-4
500 WATT MULTI-LINE TVS ARRAY DESCRIPTION The PSMDAxxC-4 Series are monolithic transient voltage suppressor arrays that provide board level protection for standard TTL and MOS bus line applications against
GBLC05CDN - GBLC24CDN
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The GBLCxxCDN Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and SMART phones.
CD214B Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts Model 214 is currently available, although not recommended for new designs.
SMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 6 watts pplications n I 6-4-2 S (Min. Level 4) n I 6-4-4 T n I 6-4-5 Surge SMJ
PSD0561 HIGH POWERED SURGE PROTECTION TVS ARRAY DESCRIPTION DFN-2 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
HIGH POWERED SURGE PROTECTION TVS ARRAY DESCRIPTION The is a transient voltage suppressor array, designed to protect sensitive electronics from damage or latchup due to EOS, lightning, CDE and ESD. This
PAM28DOAC Series 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. Automotive Applications
4 WATT TVS COMPONENT APPLICATIONS Automotive Applications DO-214AC PACKAGE FEATURES AEC-Q11 Qualified ISO 7637-2 Pulse 1, 2a, 2b, 3a, 3b Compliant UL File Recognition #E28219 IEC 6-4-2 (ESD): Level 4 -
SLVU WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
600 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such
SMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5 to 495 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
SMP6LLCxx-2P Series RTCA DO-160G COMPLIANT PRODUCT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-16 PACKAGE APPLICATIONS FEATURES
MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION The are high powered multi-line low capacitance transient voltage suppressor arrays that provides board level protection for standard TTL and MOS bus line
CDSOT23-T24CAN-Q CANbus Protector
*RoHS & OMPLINT eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* n -Q101 compliant**
DSL03-24 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The transient voltage array, steering diode combination device meets
PAM37SDxxAL/CAL Series RTCA DO-160G COMPLIANT PRODUCT
400 WATT TVS COMPONENT DESCRIPTION The is a transient voltage suppressor array, designed to protect applications such as consumer electronic products, automotive, telecommunications, aerospace and intelligent
USB USB50824C 500 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The USB508xx and USB508xxC Series are multi-line ultra low capacitance transient voltage suppressor arrays that provide board level protection
PAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS.
15 WATT TVS COMPONENT APPLICATIONS Automotive DO-214AB PACKAGE FEATURES AEC-Q11 Qualified UL File Recognition #E28219 Compatible with IEC 6-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible with IEC
5.0SMDJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 5 to 7 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: V R =. % x VR @ 25
SMDA03LC - SMDA24LCC 500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION The SMDAxxLC and SMDAxxLCC Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard
CDSOD323-TxxC - TVS Diode Array Series
*RoS OMPLINT eatures n RoS compliant* n Protects one line or one I/O port n idirectional configuration n S protection 30 k max. n Low capacitance: ~3 p typical n Replaces 0805 ML devices pplications n
SMCJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 2 to 58 volts n Power issipation: 5 watts n RoHS compliant* n -Q compliant** pplications n Protection of power buses n Protection of
SMLJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage
Parameter Symbol Value Unit
*RoHS OMPLINT VRSIONS VILL eatures Lead free versions available RoHS compliant (lead free version)* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts 214 Transient Voltage
CD214L Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts Model 214L is currently available, although not recommended for new designs. Model
30KPA Series RTCA DO-160G COMPLIANT PRODUCT. 30kW POWER TVS COMPONENT DESCRIPTION AXIAL LEAD PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
30kW POWER TVS COMPONENT DESCRIPTION The, are discrete 30,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently damage voltage
SMAJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
SMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
P4SMA Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown Voltage: 6.8 to 55 volts n Peak Pulse Power: 4 watts n Typical temperature coefficient: V R =.1 % x V R
SMBJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 6 watts n RoHS compliant* n -Q11 compliant** pplications n Protection of power buses n Protection
SMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
CDSOT23-T24CAN CANbus Protector
*RoHS OMPLINT 2801L eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* pplications n
1.5KE SERIES 1500 WATT TVS COMPONENT DESCRIPTION AXIAL LEAD PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
1500 WATT TVS COMPONENT DESCRIPTION The 1.5KE Series, are discrete 15,00 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently
5KP5.0A - 5KP440A. 5kW POWER TVS COMPONENT DESCRIPTION AXIAL LEAD PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAMS
5kW POWER TVS COMPONENT DESCRIPTION The 5KP Series, are discrete 5,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently
SMAJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
SMLJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage
CD214C Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts Model 214 is currently available, although not recommended for new designs.
CDDFN N - Surface Mount TVS Diode Array
*RoHS OMPLINT eatures n I -- (S) ±3 kv (ir/ontact) I -- (Lightning) (/ μs) n S protection to I -- (Level ) n RoHS compliant* pplications n WN/LN devices n // thernet N-7N - Surface Mount TVS iode rray
TV06B5V0-HF Thru. TV06B441-HF
TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive
SMAJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 4 watts n RoHS compliant* n -Q1 compliant** pplications n Protection of power buses n Protection
CDSOD323-TxxC-DSL - TVS Diode Series
*RoHS OMPLINT & **HLOGN R eatures n Protects one line or one I/O port n idirectional configuration n S protection 30 max. n Low capacitance ~ 3 p typ. n Replaces 0805 MLV devices n RoHS compliant* n Halogen
Solution 1 TVS Diode Array: CDSOT C 2 Bridge Rectifiers: CDNBS04-B TVS Diode: SMBJ58A 1 Transformer: SM51108EL
Solution Products SOT236-0504 NS04-08200 Ethernet 10/100 ase-t Power over Ethernet (PoE) P Unit Protection Objective 10/100 ase-t Power over Ethernet (PoE) interfaces combine data and 48 V to provide remote
Digital Audio Tuner for Automotive Automotive Entertainment Systems Automotive Navigation Systems PARAMETER SYMBOL VALUE UNITS
HIGH POWER TVS ARRAY APPLICATIONS Digital Audio Tuner for Automotive Automotive Entertainment Systems Automotive Navigation Systems SURFACE MOUNT FEATURES Junction Passivation Optimized Design Passivated
CDSOD323-TxxLC - TVS Diode Series
**RoHS OMPLINT eatures n Lead free as standard* n S protection 30 k max. n Low capacitance ~.0 p n Protects line n Uni/bidirectional configuration pplications n HMI.4 n igital isual Interface (I) n US
CD214A-B120 ~ B1100 Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-xR Series is the
SMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
1.5SMC Transient Voltage Suppressor Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown oltage: 6.8 to 55 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: R =.
CD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier Diode
*RoHS OMPLINT eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems
TV04A5V0-HF Thru. TV04A441-HF
TV45V-HF Thru. TV444-HF Working Peak : 5. to 44 Volts Power Dissipation: 4 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 4W peak pulse power capability with a / µs waveform, repetitive
AQ4022 Series 1.3pF, 15A Discrete TVS Diode
Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering diodes with one or two avalanche
CD214A-B220 ~ B260 Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-2xR Series is the
CD214A-B3xR Series Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n Low profile n Low power loss, high efficiency n UL 94V-0 classification pplications n Switch Mode Power Supplies n Portable equipment batteries n High frequency
WE05MF. 2 SOT-553 (Top View) Features IEC COMPATIBILITY (EN ) Tel: Transient Voltage Suppressor SOT-553
Document: W030044, Rev: A Transient Voltage Suppressor Features Solid-state silicon-avalanche technology 30 Watts Peak Pulse Power per Line (t p =8/20μs) Low operating and clamping voltages Up to Four
TVS Diode Arrays (SPA Diodes)
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
ATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
High Voltage, Input Rectifier Diode, 40 A
PbF, VS-4PS16PbF, -M3, VS-4PS16-M3 High Voltage, Input Rectifier iode, 4 TO-247 modified Base cathode 2 1 3 athode node PbF -M3 TO-247 Base cathode + 2 1 3 node - - node VS-4PS16PbF VS-4PS16-M3 PROUT SUMMRY
AQ4020 Series 2.5pF, 30A Discrete TVS Diode
AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
SP4021 Series 2.5pF, 25A Discrete TVS Diode
SP40 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The SP40 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
SP4020 Series 2.5pF, 30A Discrete TVS Diode
SP400 Series.5pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP400 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
AQ4020 Series 2.5pF, 30A Discrete TVS Diode
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
TV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device
TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive
TV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility
ATV66SM836A-G. SMD Transient Voltage Suppressor. Working Voltage: 36 Volts Peak Pulse Power: 6600 Watts RoHS Device. Features.
orking Voltage: 36 Volts Peak Pulse Power: 66 atts RoHS Device eatures -Glass passivated chip. -66 peak pulse power capability with a 1/µs waveform, repetitive rate (duty cycle):.1% -Meets ISO7637-2 5a
SP4208 series 3.0pF, 30A Discrete TVS Diode
SP4208 series 3.0pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP4208 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
WS2.8LVU. Features IEC COMPATIBILITY (EN ) Transient Voltage Suppressor. SOT23-3L (Top View) Document: W , Rev: C
Document: W33, Rev: C Transient Voltage Suppressor Features 4 Watts peak pulse power (t p =8/μs) One device protects one unidirectional line Two devices protect two high-speed data line pairs Low capacitance
5.0SMDJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 12 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: V R = 0.1 % x
Distributed by: www.jameco.com -8-83-4242 The content and copyrights of the attached material are the property of its owner. MMT424 NPN SMLL SIGNL SURF MOUNT TRNSISTOR Features pitaxial Planar Die onstruction
ATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
SD Series 450W Discrete Unidirectional TVS Diode
General Purpose ESD Protection - 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SD series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
Adjustable Precision Shunt Regulator. Features. Application. - Ref
escription The is a low voltage three terminal adjustable shunt regulator with a guaranteed thermal stability over applicable temperature ranges. The output voltage can be set to any value between V R
Surface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
Features. Ordering and Marking Information. N-Channel Enhancement Mode MOSFET 30V/7.4A, R DS(ON)
SM268NSC N-Channel Enhancement Mode MOSFET Features Pin escription 3V/7.4, R S(ON) = 7mΩ(max.) @ V GS =V R S(ON) = 2.5mΩ(max.) @ V GS =4.5V Reliable and Rugged Lead Free and Green evices vailable (RoHS
15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
LCDA15-1. Low Capacitance TVS Diode Array PRELIMINARY Features. PROTECTION PRODUCTS Description. Mechanical Characteristics.
Description The is a low capacitance transient voltage suppressor (TVS) diode array. It is designed to protect sensitive CMOS ICs from the damaging effects of ESD and lightning. Each device will protect
Lead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop
*RoHS OMPLINT eatures Lead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop This series is currently available, but not recommended for new designs. The Model 23- Series
P6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
P6SMB11AT3G Series Pb Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
AIC mA, 3μA Ultra Low Quiescent Curent LDO Voltage Regulator FEATURES GENERAL DESCRIPTION APPLICATIONS TYPICAL APPLICATION CIRCUIT
350m, 3μ Ultra ow Quiescent Curent O Voltage Regulator FTURS Input Voltage 2.0V~6.8V Output Voltage 0.8V~5.0V 550mV Typical ropout Voltage at 350m load current and 3.3V output voltage Ultra ow Quiescent
SZ1SMB Series. TVS Diodes. Surface Mount > 600W > SZ1SMB Series. Description
SZ1SMB Series Pb Description The SZ1SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
MUR405, MUR410, MUR415, MUR420, MUR440, MUR460
405, 410, 415, 420, 440, 460 420 and 460 are Preferred Devices SWITCHMODE Power Rectifiers These state of the art devices are a series designed for use in switching power supplies, inverters and as free
The ESD5451R is available in DFP1006-2L package. Standard products are Pb-free and Halogen-free. Circuit diagram
1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to protect sensitive
AQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
Features. Ordering and Marking Information. Dual N-Channel Enhancement Mode MOSFET 20V/9A, R DS(ON) = V GS = 4.5V = 4V = 3.
ual N-Channel Enhancement Mode MOSFET Features 2V/9, = 9.5mW(max.) @ = 4.5V = mw(max.) @ = 4V =.5mW(max.) @ = 3.7V = 11.5mW(max.) @ = 3.1V = 13mW(max.) @ = 2.5V Reliable and Rugged ES Protected Lead Free
HSMP-382x, 482x. Data Sheet. Surface Mount RF PIN Switch and Limiter Diodes. Features
HSMP-382x, 482x Surface Mount RF PIN Switch and Limiter iodes ata Sheet escription/applications The HSMP-382x series is optimized for switching applications where ultra-low resistance is required. The
APM9948K. Pin Description. Features. Applications. Ordering and Marking Information. Dual N-Channel Enhancement Mode MOSFET 60V/4A, R DS(ON) = 10V
ual N-Channel Enhancement Mode MOSFET Features 60V/4, R S(ON) = 60mΩ(typ.) @ V GS = 0V R S(ON) = 72mΩ(typ.) @ V GS = 4.5V Super High ense Cell esign Reliable and Rugged Lead Free and Green evices vailable
SM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
Surface Mount > 400W > 1SMA10CAT3G Series. Description. Features. Board Mounting. Low Profile Package. Functional Diagram. Additional Information
C TVS Diodes 1SMA10CAT3G Series Pb Description The 1SMA10CAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability,