Autumn Chill at Hogwarts Instructions HP103 (All seams and serged edges are ¼ width)

Transcription

1

2

3 Autumn Chill at Hogwarts Instructions HP103 (All seams and serged edges are ¼ width) Fabric & Notions: cottons, light weigh denim or corduroy, stretch knits, snaps and tiny buttons. Long Sleeve Turtleneck select a knit with enough stretch to expand from 1 to 2 With right sides together, sew shoulder seams. Sew center back seam of collar. Fold collar in half right side out and pin to the neck opening. Sew in place slightly stretching collar to opening as you sew. Hem sleeve edge. With right sides together, sew sleeve to armhole opening. Sew the front section to the back at the side seam. Finish hem. Note: For a quick and easy cable knit or ribbed sweater use a human sweater with a finished edge. Adjust the pattern by omitting the ¼ hem on sleeves and the sweater bodice, placing the pieces directly on the finished edge. The sweater will be a fast sew. To prevent the sewn edge from raveling, apply Fray Check. Four Pocket Pants Sew pant yokes to pant back sections. Fold upper edge of back pockets over, press and top stitch. Turn pocket edges in ¼ on remaining sides. Press. Pin pockets in place on back sections and topstitch pockets. Sew pocket lining to the front pant sections at curved edge. Clip to seam, turn in and press. Sew the pocket to the pocket lining. Baste top and side of pocket. Serge or zigzag front extensions of pant closure. Sew center front seam from the dot to the crotch. Turn the left extension under and top stitch the fly. Sew front sections to the back sections at the side seams. Press side seams open and top stitch. Hem pant legs. Sew center back seam. Sew inner thigh seam. Sew waistband to pants. Leaving a ¼ overhang of fabric at each end. Zig zag or serge lower edge of the waistband lining. With right sides together, sew the upper edge of waistband and lining. Turn the lining into the pants, tucking in edges. Press Handfinish waistband. Fit the pants to the doll and sew on snaps. Use the second waistband cut to make the belt loops. Turn both edges under and fold in half. Press & topstitch. Place two loops in front and two in the back. Jacket Sew center back seam. Stitch back and front sections together at the shoulder seams. Fold collar in half, sew each end, turn and press. Pin the collar to the neck edges, matching the center of the collar to the center of the back section. Baste in place. Sew the center back seam of the jacket facing. Serge or zigzag the outer edge of the jacket facing. With right sides together, pin the jacket facing to the jacket and stitch.

4 Clip seams, turn facing in and press. Sew front sections to the back section at the side seam. Hem sleeve edge. Prepare sleeve tabs by folding edges under and top stitching. Cut the piece in half to make two tabs. Pin inside the sleeve as indicated on the pattern. Sew the underarm seam of the sleeve. Turn and press. With right sides together, pin the sleeve to the sleeve opening, matching the dot on the sleeve to the shoulder seam. Sleeve seam goes to the back of jacket. Fold the upper jacket flaps in half. Sew each side. Turn and press. Pin flap to each front section as indicated on the pattern piece. Trim excess and press the flap down. Stitch in place. Prepare the Cargo pocket. Fold in half. Pleat each side in ¼ to the center to create the vent. Baste vent in place. Turn all edges under and press. Sew the pocket to the jacket as shown on the pattern Prepare the pocket flap. Fold in half; sew each end, turn and press. Sew the flap to the pocket, fold over and press. Turn up hem and finish by machine or hand. Sew on buttons and snaps if desired. Thank you for your business. I hope you use this pattern many times to create fun clothes for your favorite Harry Potter doll. (I am not affiliated with the Tonner Doll Company) tcasey@triad.rr.com, Website : Copywrite 2007 DesignsbyJude

5

6

7

8