Freestanding Snowmen #12599 / 36 Files / 6 Designs

Transcription

1 #12599 / 36 Files / 6 Designs Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen Chevron Snowman Bottom Sections 3.65 X 6.24 in X mm 37,872 St. zr L Chevron Snowman Middle Back Section 4.98 X 4.80 in X mm 48,577 St. zr Chevron Middle Left Section 4.98 X 4.81 in X mm 49,234 St. zr Chevron Middle Right Section 4.98 X 4.82 in X mm 48,673 St. zr Snowman Head Left Section with Carrot 5.46 X 6.42 in X mm 21,074 St. zr L Snowman Head Right Section 3.83 X 6.41 in X mm 18,335 St. zr L Snowman Base 4.81 X 4.72 in X mm 9,085 St. R Blank Top Hat Sides 4.59 X 4.82 in X mm 40,418 St. zr Blank Top Hat Brim 4.44 X 4.80 in X mm 27,300 St. zr Blank Top Hat Top 2.67 X 3.13 in X mm 14,393 St. zr Left Arm Branch Right Arm Branch Some solid It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.

2 #12599 / 36 Files / 6 Designs Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen Snowflake Snowman Bottom Sections 3.66 X 6.19 in X mm 25,517 St. zr L Snowflake Snowman Middle Back Section 26,271 St. zr Snowflake Snowman Middle Left Section 27,462 St. zr Snowflake Snowman Middle Right Section 27,051 St. zr Snowman Head Left Section with Carrot 5.46 X 6.42 in X mm 21,074 St. zr L Snowman Head Right Section 3.83 X 6.41 in X mm 18,335 St. zr L Snowman Base 4.81 X 4.72 in X mm 9,100 St. R Swirly Top Hat Sides 4.59 X 4.82 in X mm 46,779 St. zr Swirly Top Hat Brim 4.42 X 4.78 in X mm 34,021 St. zr Swirly Top Hat Top 2.67 X 3.13 in X mm 17,336 St. zr Left Arm Branch Right Arm Branch Some solid It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.

3 #12599 / 36 Files / 6 Designs Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen Blank Snowman Bottom Sections 3.66 X 6.23 in X mm 13,321 St. zr L Blank Snowman Middle Back Section 21,439 St. zr Blank Snowman Middle Left Section 21,608 St. zr Blank Snowman Middle Right Section 21,622 St. zr Snowman Head Left Section with Carrot 5.46 X 6.42 in X mm 21,074 St. zr L Snowman Head Right Section 3.83 X 6.41 in X mm 18,335 St. zr L Snowman Base 4.81 X 4.72 in X mm 9,100 St. R Swirly Top Hat Sides 4.59 X 4.82 in X mm 46,779 St. zr Swirly Top Hat Brim 4.42 X 4.78 in X mm 34,021 St. zr Swirly Top Hat Top 2.67 X 3.13 in X mm 17,336 St. zr Left Arm Branch Right Arm Branch Some solid It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.

4 Listings below indicate color sample, stitching order and suggested thread color number. Most numbers indicate Isacord thread. Colors beginning with refer to YLI Fine Metallics, 7 refer to Yenmet Metallic, 8 refer to YLI Variations Variegated Thread and 9 refer to Isacord Multicolor Variegated Chevron Snowman Bottom Sections n 1. Bottom Section Placement n 3. Chevron Lace Chevron Snowman Middle Back Section n 1. Middle Section Placement n 3. Chevron Lace Chevron Middle Left Section n 1. Middle Section Placement n 3. Chevron Lace Chevron Middle Right Section n 1. Middle Section Placement n 3. Chevron Lace Snowman Head Left Section with Carrot n 5. Lace Carrot Snowman Head Right Section Snowman Base n 1. Base Placement Stitch n 3. Cover Stitch & Detail Blank Top Hat Sides n 1. Hat Sides Blank Top Hat Brim n 1. Hat Brim Blank Top Hat Top n 1. Hat Top Left Arm Branch n 1. Left Arm Branch Right Arm Branch n 1. Right Arm Branch Snowflake Snowman Bottom Sections n 1. Bottom Section Placement Stitch n 3. Snowflakes & Swirls Freestanding Snowmen #12599 / 36 Files / 6 Designs Snowflake Snowman Middle Back Section n 3. Snowflakes & Swirls Snowflake Snowman Middle Left Section n 3. Snowflakes & Swirls Snowflake Snowman Middle Right Section n 3. Snowflake & Swirls Snowman Head Left Section with Carrot n 5. Lace Carrot Snowman Head Right Section Snowman Base n 1. Base Placement Stitch n 3. Cover Stitch & Detail Swirly Top Hat Sides n 1. Hat Sides Swirly Top Hat Brim n 1. Hat Brim Swirly Top Hat Top n 1. Hat Top Left Arm Branch n 1. Left Arm Branch Right Arm Branch n 1. Right Arm Branch Freestanding Appliqué Blank Snowman Bottom Sections n 1. Bottom Section Placement Stitch n 3. Lace Blank Snowman Middle Back Section n 3. Lace Blank Snowman Middle Left Section n 3. Lace Blank Snowman Middle Right Section n 3. Lace Snowman Head Left Section with Carrot n 5. Lace Carrot Snowman Head Right Section Snowman Base n 1. Base Placement Stitch n 3. Cover Stitch & Detail Swirly Top Hat Sides n 1. Hat Sides Swirly Top Hat Brim n 1. Hat Brim Swirly Top Hat Top n 1. Hat Top Left Arm Branch n 1. Left Arm Branch Right Arm Branch n 1. Right Arm Branch Isacord Thread Colors Used in Freestanding Snowmen Collection # White 0020 Black 0112 Leadville 0811 Candlelight 1010 Toast 1055 Bark - Freestanding Lace 1366 Mahogany 4174 Charcoal 4250 Snowmoon It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.

5 Instructions General Freestanding Lace Guidelines Supplies: General Instructions Embroidery Thread: 1. Hoop two layers of water-soluble stabilizer. Use the same embroidery thread in the bobbin as the needle. 2. Attach the hoop to the machine and select the design of your Needles: choice. Use an Organ 80/12 Titanium needle for extended needle life. 3. Stitch the design. Stabilizer: 4. Remove the hoop from the machine and the design from the Use water-soluble stabilizer or film water-soluble stabilizer. hoop. Trim excess stabilizer from the design. 5. Rinse away remaining stabilizer and allow it to dry. Handy Hints: For Stiffer Lace: DO NOT rinse away all of the stabilizer for a stiffer lace. Note that the thread may appear a shade darker if stabilizer is not removed completely. If you happen to wash too much out, easily re-stiffen by diluting some stabilizer scraps in water and dipping the item in the solution. For Very Soft Lace: Cut away excess stabilizer. Remove remaining stabilizer by rinsing under warm running water until all traces of the stabilizer are gone. Note: If lace should become too limp to work with, dissolve stabilizer scraps in warm water and apply to the lace. Drying Lace: The lace looks best when left to dry completely. Lay lace piece with right side down to dry. This will minimize the tendency for the lace to curl. Be sure to flatten the piece out entirely and allow ample time to dry. Diagram 1 Eyelet Handy Hints: For 3D Lace Projects: Rinsing out lace with very hot water can cause wrinkles in some fabrics after it has been embroidered. To prevent this, pre-shrink cotton fabric by washing it in warm water and drying it in a dryer. If item becomes too limp to work with, iron the appliqué pieces on the wrong side while applying spray starch. After ironing, spray again with starch and allow to dry completely. This will stiffen the lace pieces nicely and aid in construction. A pair of tweezers, hemostats, stiletto or a tiny crochet hook can be extremely helpful when inserting the buttonettes into the eyelets. (Please see Diagram 1 for explanation of buttonette and eyelet.) Insert the tip of the tweezers, hemostats or crochet hook into the eyelet, grasp the buttonette and pull through the eyelet. Or a stiletto could be used to push the buttonette through the eyelet. Buttonette

6 Instructions General Freestanding Appliqué Guidelines Supplies: Embroidery Thread: Use the same embroidery thread in the bobbin as the needle. Needles: Use an Organ 80/12 Titanium needle for extended needle life. Stabilizer: Use water-soluble stabilizer or film water-soluble stabilizer. General Appliqué Instructions 1. Hoop two layers of water-soluble stabilizer. 2. Attach the hoop to the machine and select the design of your choice. 3. Stitch the Placement Stitch. Photo 1 4. Place a piece of appliqué fabric over the Placement Stitch so that it is completely covered. 5. Stitch the Cut Line & Tackdown Stitch. 6. Carefully cut away the excess applique fabric. Photo 2 7. Stitch the remainder of the design and repeat for any remaining pieces. Photo 3 8. Remove the hoop from the machine and the design from the hoop. 9. Trim excess stabilizer from the design. 10. Rinse away remaining stabilizer and allow it to dry. Handy Hints For 3D Appliqué Projects: Adhere 2 layers of heavy weight stabilizer to the back of appliqué fabrics with temporary adhesive spray BEFORE hooping or placing down for tackdown and cut in place. This gives fabric a more rigid structure. A pair of tweezers, hemostats, stiletto or a tiny crochet hook can be extremely helpful when inserting the buttonettes into the eyelets. (See Diagram 1 for explanation of buttonette and eyelet.) Insert the tip of the tweezers, hemostats or crochet hook into the eyelet, grasp the buttonette and pull through the eyelet. Or a stiletto could be used to push the buttonette through the eyelet. Buttonette Diagram 1 Eyelet Appliqué 1 2 3

7 Instructions For anyone wanting to build a snowman, this freestanding collection is for you! These fabric and thread snowmen will melt your heart and look fantastic wherever you place them in your home this holiday season. Chevron Snowman Summary Requires 6 Chevron Snowman Bottom Sections Requires 1 Chevron Snowman Middle Back Section Requires 1 Chevron Snowman Middle Left Section Requires 1 Chevron Snowman Middle Right Section Requires 1 Snowman Head Left Section w/ Carrot Requires 1 Snowman Head Right Section Requires 1 Snowman Base Requires 1 Blank Top Hat Sides Requires 1 Blank Top Hat Brim Requires 1 Blank Top Hat Top Requires 1 Left Arm Branch Requires 1 Right Arm Branch Snowflake Snowman Summary Requires 6 Snowflake Snowman Bottom Sections Requires 1 Snowflake Snowman Middle Back Section Requires 1 Snowflake Snowman Middle Left Section Requires 1 Snowflake Snowman Middle Right Section Requires 1 Snowman Head Left Section w/ Carrot Requires 1 Snowman Head Right Section Requires 1 Snowman Base Requires 1 Swirly Top Hat Sides Requires 1 Swirly Top Hat Brim Requires 1 Swirly Top Hat Top Requires 1 Left Arm Branch Requires 1 Right Arm Branch Blank Snowman Summary Requires 6 Blank Snowman Bottom Sections Requires 1 Blank Snowman Middle Back Section Requires 1 Blank Snowman Middle Left Section Requires 1 Blank Snowman Middle Right Section Requires 1 Snowman Head Left Section w/ Carrot Requires 1 Snowman Head Right Section Requires 1 Snowman Base Requires 1 Swirly Top Hat Sides Requires 1 Swirly Top Hat Brim Requires 1 Swirly Top Hat Top Requires 1 Left Arm Branch Requires 1 Right Arm Branch

8 Instructions Supplies Embroidery thread Fabric for appliqué (suggestions satin, glitter satin, linen, sparkle or glittery chiffon over white fabric, etc.) Embroidery machine Heavy weight cut away stabilizer or sticky back cut away stabilizer Wash away stabilizer Yarn and large eye needle (Top hat) Ribbon, trim, feathers, etc. (Embellishments for top hat) Photo 1 Optional alligator clamps, tweezers, hemostats, stiletto or a tiny crochet hook Follow the General Freestanding Lace Guidelines and General Freestanding Appliqué Guidelines to stitch the required pieces as listed in the summary above. Shape the nose for the snowman during the drying process. PHOTO 1 Basic Instructions for Building a Snowman and Top Hat Assemble the snowman bottom sections by inserting the five buttonettes of one bottom section piece into the five eyelets on the next bottom section piece. Continue with all 6 pieces until the bottom section is together, forming a circle. Set aside. PHOTO 2 Assemble the snowman middle sections by inserting two buttonettes into the corresponding eyelets on each of the 3 middle section pieces. Assemble the snowman middle Photo 4 sections by inserting three buttonettes of middle back section to the eyelets on the middle left section. Continue with the middle right section to complete the middle section, forming a circle. Set aside. PHOTO 3 Assemble the snowman head by inserting two buttonettes into the corresponding eyelets on each of the two head section pieces, forming half a head. Assemble the snowman head sections together by inserting the three buttonettes on the back of the head into the corresponding eyelets on the other back head section. Insert the two buttonettes for the front of the head into the corresponding eyelets on the other front head section, forming a head. Pull the buttonette of the nose into the two eyelets on the front from the back of the head. Set aside. PHOTO 4 Build the snowman by placing the tabs of the middle section into the slots of the bottom section, pulling from the bottom of the snowman. PHOTO 5 Photo 2 Photo 6 Photo 3 Photo 5 Photo 7 Continue building the snowman by placing the tabs of the head section into the slots of the middle section, pulling from the bottom of the snowman. PHOTO 6 Attach the left arm branch and right arm branch by sliding the end of the branch into the corresponding slot of the left middle section and right middle section. PHOTO 7

9 Instructions Attach the snowman base to bottom section of snowman by inserting the buttonettes from the base into the eyelets of the bottom section. PHOTO 8 To assemble the top hat: Follow the Diagram on following page for the direction of stitching the top hat together. Using yarn and large eye needle with a knot at the end of the yarn, start in the middle of the brim and the bottom of the two hat sides by bringing the yarn up from the back so the knot is on the underneath side of the hat brim. Bring the needle through the bottom holes of both the hat sides. PHOTO 9 Continue up the side by overlapping the holes and Photo 8 Photo 9 bringing the yarn into and out of the holes. PHOTO 10 Continue around the top of the hat halfway. PHOTO 11 Go down the opposite side of the top hat. PHOTO 12 Continue along the bottom of the side pieces by overlapping the yarn to the brim and to the other side. Go up the side in the opposite holes back to the top. Photo 10 Photo 11 Continue along the remaining top of the hat. PHOTO 13 Photo 12 Photo 13 Go down the other side of the hat in the opposite holes. You will end in the place you started. Knot the yarn. PHOTO 14 The top hat is complete. Embellish with ribbon, trim or feathers, etc. Place on top of the head. PHOTO 15 Your Freestanding Snowman is complete! Follow the Basic Instructions for Building a Snowman and Top Hat to create the Chevron Snowman, Snowflake Snowman, and Blank Snowman. Photo 15 Photo 14

10 Hat Diagram Begin at *A, start under brim and overlap holes on sides Stitch up to B, then halfway around the top of hat to C Stitch down to D, overlapping the holes on sides Stitch the brim to the sides from D all the way back around to D Stitch back up to C, overlapping holes on sides Stitch the other half of the top of hat back around to B Stitch back down to A overlaping sides to end C B D *A