Freestanding Angels #12646 / 15 Files / 3 Angels

Transcription

1 #12646 / 15 Files / 3 Angels Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen Damask Angel Wings 7.49 X 5.19 in X mm 49,955 St Damask Angel Praying Hands 3.46 X 3.38 in X mm 15,535 St Damask Angel Gown X 7.57 in X mm 18,102 St Damask Angel Gown X 7.68 in X mm 36,492 St Damask Angel Base FSL 4.48 X 4.36 in X mm 15,380 St Feather Angel Wings 7.44 X 4.90 in X mm 48,487 St Feather Angel Heart Hands 4.04 X 3.57 in X mm 19,168 St Feather Angel Gown X 7.57 in X mm 18,265 St Feather Angel Gown X 7.68 in X mm 36,717 St Feather Angel Base FSL 4.48 X 4.36 in X mm 15,380 St Diamond Angel Wings 7.30 X 5.10 in X mm 36,693 St Diamond Angel Book Hands 4.04 X 3.54 in X mm 18,399 St. It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.

2 #12646 / 15 Files / 3 Angels Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen Diamond Angel Gown X 7.57 in X mm 15,656 St Diamond Angel Gown X 7.68 in X mm 31,526 St Diamond Angel Base FSL 4.48 X 4.36 in X mm 15,380 St. It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.

3 #12646 / 15 Files / 3 Angels Listings below indicate color sample, stitching order and suggested thread color number. Most numbers indicate Isacord thread. Colors beginning with refer to YLI Fine Metallics, 7 refer to Yenmet Metallic, 8 refer to YLI Variations Variegated Thread and 9 refer to Isacord Multicolor Variegated Damask Angel Wings Feather Angel Heart Hands Diamond Angel Book Hands n 1. Wings Placement Stitch n 1. Sleeves Placement Stitch n 1. Sleeves Placement Stitch n 2. Cut Line & Tackdown n 2. Cut Line & Tackdown n 2. Cut Line & Tackdown n 3. Purple Detail & Lace n 3. Grey Lace n 3. Book Placement Stitch n 4. Blue lace n 4. Dark Blue Detail n 4. Cut Line & Tackdown n 5. Grey Lace n 5. Heart Placement Stitch n 5. Grey Detail & Lace n 6. Head Lace n 6. Cut Line & Tackdown n 6. Light Purple Detail & Lace n 7. Face Lace n 7. White Detail & Lace n 7. Dark Purple Detail & Lace n 8. Cover Stitch & Lace n 8. Dark Purple Detail n 8. Hands Lace n 9. Cover Stitch & Blue Linework n 9. Sleeves & Hands Cover Stitch & Lace n 9. Sleves & Hands Cover Stitch & Lace n 10. Heart Cover Stitch & Sleeves Linework n 10. Book Cover Stitch n 11. Sleeve Cover Stitch Blue Linework Damask Angel Praying Hands n 1. Sleeves Placement Stitch n 2. Cut Line & Tackdown n 3. Light Purple Lace n 4. Dark Purple Detail & Lace n 5. Hands Lace n 6. Cover Stitch & Lace n 7. Cover Stitch Blue Linework Damask Angel Gown 1 n 1. Gown Front & Back Placement Stitch n 2. Cut Line & Tackdown n 3. Purple Detail n 4. Cover Stitch & lace n 5. Cover Stitch Blue Linework Damask Angel Gown 2 n 1. Gown Left & Right Sides Placement Stitch n 2. Cut Line & Tackdown n 3. Purple Detail n 4. Cover Stitch & Lace n 5. Cover Stitch Blue Linework Damask Angel Base FSL n 1. Angel Base Feather Angel Wings n 1. Wings Placement Stitch n 2. Cut Line & Tackdown n 3. White Lace n 4. Grey Lace n 5. Light Blue Detail & Lace n 6. Medium Blue Detail n 7. Head Lace n 8. Face Lace n 9. Cover Stitch & Lace n 10. Head Medium Blue Linework n 11. Cover Stitch Purple Linework Feather Angel Gown 1 n 1. Gown Front & Back Placement Stitch n 2. Cut Line & Tackdown n 3. Dark Blue Detail n 4. White Detail n 5. Cover Stitch & Lace n 6. Cover Stitch Purple Linework Feather Angel Gown 2 n 1. Gown Left & Right Sides Placement Stitch n 2. Cut Line & Tackdown n 3. Dark Blue Detail n 4. White Detail n 5. Cover Stitch & Lace n 6. Cover Stitch Purple Linework Feather Angel Base FSL n 1. Angel Base Diamond Angel Wings n 1. Wings Placement Stitch n 2. Cut Line & Tackdown n 3. White Lace n 4. Grey Lace n 5. Dark Purple Detail n 6. Head Lace n 7. Face Lace n 8. Cover Stitch & Lace n 9. Head Dark Purple Linework n 10. Cover Stitch Blue Linework Diamond Angel Gown 1 n 1. Gown Front & Back Placement Stitch n 2. Cut Line & Tackdown n 3. Light Purple Detail n 4. Dark Purple Detail n 5. Cover Stitch & Lace n 6. Cover Stitch Blue Linework Diamond Angel Gown 2 n 1. Gown Left & Right Sides Placement Stitch n 2. Cut Line & Tackdown n 3. Light Purple Detail n 4. Dark Purple Detail n 5. Cover Stitch & Lace n 6. Cover Stitch Blue Linework Diamond Angel Base FSL n 1. Angel Base Isacord Thread Colors Used in Freestanding Angels Collection # Ghost White 0015 White 0105 Ash Mist 2711 Dark Current 2764 Violet 4610 Deep Aqua 4625 Seagreen 5050 Luster - Freestanding Appliqué FSL - Freestanding Lace It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.

4 General Freestanding Appliqué Guidelines Freestanding Angels Supplies: Embroidery Thread: Use the same embroidery thread in the bobbin as the needle. Needles: Use an Organ 80/12 Titanium needle for extended needle life. Stabilizer: Use water-soluble stabilizer or film water-soluble stabilizer. General Appliqué 1. Hoop two layers of water-soluble stabilizer. 2. Attach the hoop to the machine and select the design of your choice. 3. Stitch the Placement Stitch. Photo 1 4. Place a piece of appliqué fabric over the Placement Stitch so that it is completely covered. 5. Stitch the Cut Line & Tackdown Stitch. 6. Carefully cut away the excess appliqué fabric. Photo 2 7. Stitch the remainder of the design and repeat for any remaining pieces. Photo 3 8. Remove the hoop from the machine and the design from the hoop. 9. Trim excess stabilizer from the design. 10. Rinse away remaining stabilizer and allow it to dry. Handy Hints For 3D Appliqué Projects: Adhere 2 layers of heavy weight stabilizer to the back of appliqué fabrics with temporary adhesive spray BEFORE hooping or placing down for tackdown and cut in place. This gives fabric a more rigid structure. A pair of tweezers, hemostats, stiletto or a tiny crochet hook can be extremely helpful when inserting the buttonettes into the eyelets. (See Diagram 1 for explanation of buttonette and eyelet.) Insert the tip of the tweezers, hemostats or crochet hook into the eyelet, grasp the buttonette and pull through the eyelet. Or a stiletto could be used to push the buttonette through the eyelet. Buttonette Diagram 1 Eyelet Appliqué 1 2 3

5 General Freestanding Lace Guidelines Supplies: General Embroidery Thread: 1. Hoop two layers of water-soluble stabilizer. Use the same embroidery thread in the bobbin as the needle. 2. Attach the hoop to the machine and select the design of your Needles: choice. Use an Organ 80/12 Titanium needle for extended needle life. 3. Stitch the design. Stabilizer: 4. Remove the hoop from the machine and the design from the Use water-soluble stabilizer or film water-soluble stabilizer. hoop. Trim excess stabilizer from the design. 5. Rinse away remaining stabilizer and allow it to dry. Handy Hints: For Stiffer Lace: DO NOT rinse away all of the stabilizer for a stiffer lace. Note that the thread may appear a shade darker if stabilizer is not removed completely. If you happen to wash too much out, easily re-stiffen by diluting some stabilizer scraps in water and dipping the item in the solution. For Very Soft Lace: Cut away excess stabilizer. Remove remaining stabilizer by rinsing under warm running water until all traces of the stabilizer are gone. Note: If lace should become too limp to work with, dissolve stabilizer scraps in warm water and apply to the lace. Drying Lace: The lace looks best when left to dry completely. Lay lace piece with right side down to dry. This will minimize the tendency for the lace to curl. Be sure to flatten the piece out entirely and allow ample time to dry. Diagram 1 Eyelet Handy Hints: For 3D Lace Projects: Rinsing out lace with very hot water can cause wrinkles in some fabrics after it has been embroidered. To prevent this, pre-shrink cotton fabric by washing it in warm water and drying it in a dryer. If item becomes too limp to work with, iron the appliqué pieces on the wrong side while applying spray starch. After ironing, spray again with starch and allow to dry completely. This will stiffen the lace pieces nicely and aid in construction. A pair of tweezers, hemostats, stiletto or a tiny crochet hook can be extremely helpful when inserting the buttonettes into the eyelets. (Please see Diagram 1 for explanation of buttonette and eyelet.) Insert the tip of the tweezers, hemostats or crochet hook into the eyelet, grasp the buttonette and pull through the eyelet. Or a stiletto could be used to push the buttonette through the eyelet. Buttonette

6 Supplies: OESD AquaMesh stabilizer OESD StabilStick Tear Away (for appliqué sections) Isacord threads Appliqué fabrics (for appliqué sections) Freestanding Angels General : Follow the basic appliqué instructions above for each appliqué section. For each appliqué section, place a scrap of OESD Stabil Stick on the wrong side of one of the appliqué pieces. This will interface and stiffen the appliqué fabrics to help them hold up to the lace stitching and the rinsing and drying process. Stitch each piece on two layers of OESD Aqua Mesh stabilizer. For best results, match the bobbin thread to the top thread throughout the design. (This will mean switching out the bobbin several times for each design.) After stitching each design, cut away the excess OESD Aqua Mesh stabilizer. Rinse the design in warm running water. Allow the pieces to dry overnight. Press each piece flat with a warm iron if needed once dry. Use starch if needed. Angels: Damask Angel Stitch (1) of the Damask Angel Wings ( ) Stitch (1) of the Damask Angel Praying Hands ( ) Stitch (2) of the Damask Angel Gown 1 ( ) Stitch (2) of the Damask Angel Gown 2 ( ) Stitch (1) of the Damask Angel Base ( ) Assembly Using alligator clamps, pull the second (from the bottom) buttonette of the Damask Angel Gown 1 piece through the coordinating eyelet on one of the Damask Angel Gown 2 side pieces. PHOTO 01 Button the remaining eyelet/buttonette sets the rest of the way up the dress piece. PHOTO 02 Repeat the process, with second set of Damask Angel Gown 1 and Gown 2 pieces. Next, connect the two gown sets together using buttonettes and eyelets. PHOTO 03 Button the bottom buttons all the way around the bottom of the dress. Button the base into the eyelets at the bottom center of each dress piece. PHOTO 04 and PHOTO 5 Button the Damask Angel Praying Hands into the eyelets at the shoulders of Damask Angel Wings. PHOTO 6 Insert the Angel top into the Angel dress, aligning the wings with the slits at the sides of the dress. The v shape at the center of the Angel top will fit within the Angel dress. PHOTO 07 Your angel is complete. PHOTO 8 Photo 01 Photo 03 Photo 05 Photo 07 Photo 02 Photo 04 Photo 06 Photo 08

7 Feather Angel Assemble using Assembly above. Stitch (1) of the Feather Angel Wings ( ) Stitch (1) of the Feather Angel Heart Hands ( ) Stitch (2) of the Feather Angel Gown 1 ( ) Stitch (2) of the Feather Angel Gown 2 ( ) Stitch (1) of the Feather Angel Base ( ) Diamond Angel Assemble using Assembly above. Stitch (1) of the Diamond Angel Wings ( ) Stitch (1) of the Diamond Angel Book Hands ( ) Stitch (2) of the Diamond Angel Gown 1 ( ) Stitch (2) of the Diamond Angel Gown 2 ( ) Stitch (1) of the Diamond Angel Base ( ) Freestanding Angels