Home Expressions. Size mm: 62.23w x 62.48h. No. 1 Size Inches: Size mm: w x h. Size mm: 64.77w x 64.77h. No. 6

Transcription

1 No. 1 ize nches: ize mm: titch Count: No w x 2.58h 65.53w x 65.53h 10,414 ize nches: 2.45w x 2.46h ize mm: 62.23w x 62.48h titch Count: 10,389 1 Guide titch Guide titch Tack Down itch No. 3 ize nches: 2.55w x 2.55h ize mm: 64.77w x 64.77h titch Count: 11,491 No. 4 ize nches: 4.67w x 4.08h ize mm: w x h titch Count: 19,896 1 Guide titch No. 5 ize nches: 4.60w x 4.06h ize mm: w x h titch Count: 23,571 No. 6 ize nches: 3.97w x 3.96h ize mm: w x h titch Count: 1,711 Expressive Lace 2005 Blosil Enterprises, LLC. Produced under license OED, nc. All Rights Reserved. ee Back of packaging for specific Crafter s Collection usage terms.

2 No. 7 ize nches: 4.10w x 4.55h ize mm: w x h titch Count: 24,634 No. 8 ize nches: 4.98w x 4.99h ize mm: w x h titch Count: 26,645 No. 9 ize nches: 4.79w x 5.41h ize mm: w x h titch Count: 26,665 No.10 ize nches:.68w x 7.24h ize mm: 17.27w x h titch Count: 6,951 No. 11 ize nches: 2.15w x 2.15h ize mm: 54.61w x 54.61h titch Count: 7,709 No. 12 ize nches: 2.64w x 2.01h ize mm: 67.06w x 51.05h titch Count: 8,816 1 Guide titch Guide titch Expressive Lace 2005 Blosil Enterprises, LLC. Produced under license OED, nc. All Rights Reserved. ee Back of packaging for specific Crafter s Collection usage terms.

3 No. 13 ize nches: 2.46w x 1.94h ize mm: 62.48w x 49.28h titch Count: 7,010 No. 14 ize nches: 2.95w x 1.67h ize mm: 74.93w x 42.42h titch Count: 9,496 1 Guide titch Guide titch Border No. 15 ize nches: 4.03w x 4.60h ize mm: w x h titch Count: 18,104 No. 16 ize nches: 3.89w x 4.21h ize mm: 98.81w x h titch Count: 14,271 No. 17 ize nches:.89w x 1.42h ize mm: 22.61w x 36.07h titch Count: 629 No. 18 ize nches: 2.37w x 6.20h ize mm: 60.20w x h titch Count: 19,041 Expressive Lace 2005 Blosil Enterprises, LLC. Produced under license OED, nc. All Rights Reserved. ee Back of packaging for specific Crafter s Collection usage terms.

4 No. 19 ize nches: 3.29w x 6.75h ize mm: 83.57w x h titch Count: 23,635 No. 20 ize nches: 3.55w x 3.53h ize mm: 90.17w x 89.66h titch Count: 20,824 No. 21 ize nches: 5.82w x 5.53h ize mm: w x h titch Count: 37,133 No. 22 ize nches: 3.01w x 3.00h ize mm: 76.45w x 76.20h titch Count: 13,031 No. 23 ize nches: 3.49w x 8.13h ize mm: 88.65w x h titch Count: 39,597 No. 24 ize nches: 4.43w x 4.43h ize mm: w x h titch Count: 22,791 Expressive Lace 2005 Blosil Enterprises, LLC. Produced under license OED, nc. All Rights Reserved. ee Back of packaging for specific Crafter s Collection usage terms.

5 No. 25 ize nches: 5.01w x 7.00h ize mm: w x h titch Count: 33,079 No. 26 ize nches: 4.96w x 4.96h ize mm: w x h titch Count: 41,520 No. 27 ize nches: 3.42w x 2.91h ize mm: 86.87w x 73.91h titch Count: 9,794 No. 28 ize nches: 4.86w x 4.28h ize mm: w x h titch Count: 23,772 No. 29 ize nches: 3.49w x 8.05h ize mm: 88.65w x h titch Count: 49,023 No. 30 ize nches: 4.02w x 4.00h ize mm: w x h titch Count: 22,795 Expressive Lace 2005 Blosil Enterprises, LLC. Produced under license OED, nc. All Rights Reserved. ee Back of packaging for specific Crafter s Collection usage terms.

6 No. 31 ize nches: 5.35w x 5.02h ize mm: w x h titch Count: 36,971 No. 32 ize nches: 3.48w x 7.00h ize mm: 88.39w x h titch Count: 20,370 No. 33 ize nches: 1.97w x 1.97h ize mm: 50.04w x 50.04h titch Count: 979 No. 34 ize nches: 3.26w x 3.26h ize mm: 82.80w x 82.80h titch Count: 14,820 No. 35 ize nches: 2.43w x 6.02h ize mm: 61.72w x h titch Count: 18,537 No. 36 ize nches: 3.50w x 2.73h ize mm: 88.90w x 69.34h titch Count: 7,003 Expressive Lace 2005 Blosil Enterprises, LLC. Produced under license OED, nc. All Rights Reserved. ee Back of packaging for specific Crafter s Collection usage terms.

7 General Lace Guidelines: Needles and Threads: Use the same thread in the bobbin as the needle. sacord Polyester Thread is recommended because of the strength and durability of the thread. All designs were digitized to be used with 40 wt. polyester thread. Designs may be stitched using Yenmet etallic Thread, or Yenmet ridescent Thread in the needle and the bobbin. An Organ 80/12 needle should be use. For best results, use an Organ 80/12 Titanium needle. tabilizer: Hoop a single layer of water-soluble stabilizer. We recommend OED Aqua esh tabilizer or OED Badgemaster tabilizer. Note: Use two layers of water-soluble stabilizer if design begins to tear away from stabilizer prematurely in the hoop. Embroider the design and remove the hoop from the machine and the stabilizer from the hoop. Cut away excess stabilizer. Remove remaining stabilizer rinsing under warm running water. DO NOT RNE all stabilizer from those items that need to be shaped, or if you wish the lace to have a stiffer feel. However, do note that the thread may appear a shade darker. f you happen to wash too much out, easily re-stiffen diluting some stabilizer scraps in water and dipping the item in the solution. hape lace over whatever shape you want it to be when it s dry, such as an ornament or ball, bottle or flat surface. For very soft lace, rinse until all traces of the stabilizer are gone. Handy Hints: A pair of hemostats, tweezers, or a tiny crochet hook can be extremely helpful when inserting the buttonettes into the eyelets. nsert the tip of the hemostats or crochet hook into the eyelet, grasp the buttonette, and pull through. A stiletto could also be used to push the buttonette into the eyelet. ome of the three dimensional ornaments and designs may be easier to put together when they are slightly damp. They may be re-dampened at any time. f item becomes too limp to work with, dissolve scraps of Aqua esh in warm water and apply to the item. Construction Techniques: TO CREATE THE LACE CORNER (Designs #1, #2, or #3): Corners may be stitched on water-soluble stabilizer and then appliquéd onto project, or follow instructions below for stitching directly onto fabric. ake or purchase a napkin. Hoop a layer of OED Aqua esh or OED Badgemaster Water oluble tabilizer Attach the hoop to the machine and select one of the napkin corners. titch the first color and remove the hoop from the machine. (DO NOT remove the fabric from the hoop.) ee Photo 1 pray the top of the stabilizer with 505 Temporary Adhesive pray. Place a corner of the napkin over the stitches aligning one side of the napkin corner with the upper end of the stitching, and the other side of the napkin corner with the right side end of the stitching. ee Photo 2 Return the hoop to the machine and stitch the second color. ee Photo 3 Remove the hoop from the machine. (DO NOT remove the fabric from Photo 2 Photo 1 Photo 3 the hoop.) Expressive Lace 2005 Blosil Enterprises, LLC. Produced under license OED, nc. All Rights Reserved. ee Back of packaging for specific Crafter s Collection usage terms.

8 Carefully trim away the fabric from the corner of the napkin. ee Photo 4 Return the hoop to the machine and finish stitching the design. Remove the hoop from the machine and trim thread tails. Remove the stabilizer from the hoop and cut away excess stabilizer taking care not to cut the napkin. Rinse away remaining stabilizer under warm running water. BUTTERFLE: titch your choice of butterflies (Design No. 4, No. 5, or No. 28) titch one hanger for each butterfly (Design No. 6) nsert the buttonette on the lower left wing of the butterfly into the eyelet on the lower right wing of the butterfly. Hang the butterfly inserting two of the hanger buttonettes into any two eyelets on one side of the butterfly. nsert the other two hanger buttonettes into any two eyelets on the opposite of the butterfly. PLACEHOLDER: titch one placeholder for each guest (Design No. 7). Allow placeholder to fully dry. To form the base of the holder, fold the upper edge toward the inside along the heavy stitched line. Fold the lower edge to the inside along the lower heavy stitched line. nsert the buttonettes of the Photo 4 Photo 5 back edge into the eyelets of the front. ee Photo 5 nsert a nametag in the front open area of the placeholder. ALL DOLY titch Design No. 8 one time for each doily desired. X-DED BAKET WTH HANDLE: titch one each of Designs No. 9 and No. 10. nsert the buttonettes on each of the six sides into the corresponding eyelet of the next side. nsert the buttonette on one end of the handle into one of the eyelets in the center of one of the basket sides from the inside of the basket to the outside. nsert the buttonette on the opposite end of the handle into the eyelet on the opposite side of the basket. CORNER AND BORDER: Design No. 11 corner and coordinating border No. 12, and Design No. 13 and coordinating Border No. 14. TTCH CORNER DEGN: ake or purchase a napkin. Hoop a layer of OED Aqua esh or OED Badgemaster Water oluble tabilizer. Attach the hoop to the machine and select one of the corner designs (either Design No. 11 or Design No. 13). titch the first color onto the hooped stabilizer and remove the hoop from the machine. (DO NOT remove the fabric from the hoop.) ee Photo 6 pray the top of the stabilizer with 505 Temporary Adhesive pray. Place a corner of the napkin over the stitches aligning one side of the napkin corner with one end of the stitching, and the other side of the napkin corner with the other end of the stitching. The first two tiny stitches in the upper left are the position guides for the very corner of the napkin. Return the hoop to the machine and stitch the second color. Remove the hoop from the machine. (DO NOT remove the fabric from the hoop.) Carefully trim away the fabric from the corner of the napkin. ee Photo 7 Photo 6 Photo 7 Return the hoop to the machine and finish stitching the design. Remove the hoop from the machine and trim thread tails. Remove the stabilizer from the hoop and cut away excess stabilizer taking care not to cut the Expressive Lace 2005 Blosil Enterprises, LLC. Produced under license OED, nc. All Rights Reserved. ee Back of packaging for specific Crafter s Collection usage terms.

9 napkin. TO ADD A COORDNATNG BORDER DEGN: Once again, hoop a layer of OED Aqua esh or OED Badgemaster Water oluble tabilizer. titch the first color of the coordinating border (Design No. 12 or Design No. 14) onto the hooped stabilizer and remove the hoop from the machine. (DO NOT remove the fabric from the hoop.) ee Photo 8 pray the top of the stabilizer with 505. Place the napkin so that the upper edges are aligned with the upper edges of the first stitching on the Photo 8 Photo 9 hooped stabilizer. Place the edge of the original corner piece right next to this point if you wish to have one continuous border stitch. ee Photo 9 Return the hoop to the machine and stitch the second color of the design. Remove the hoop from the machine. (DO NOT remove the fabric from the hoop.) Carefully trim away the fabric above the stitching line. ee Photo 10 Return the hoop to the machine and finish stitching the design. Remove the hoop from the machine and trim thread tails. Remove the stabilizer from the hoop and cut away excess stabilizer taking care not to cut the napkin. Rinse away remaining stabilizer under warm running water. Continue adding border designs to the right of the corner piece as desired. Apply the same technique to add borders to the left side of the corner piece. ee Photo 11 Photo 11 Photo 10 NAPKN RNG WTH FLOWER: titch one each of Design No. 15 flower, Design No. 17 button, and Design No. 18 Napkin Ring. After designs are dry, insert the buttonettes on the tips of each flower petal (Design No. 15) into the eyelets at the base of each flower petal. ee Photo 12 Place the center of the flower (Design No. 15) over the center of the napkin ring (Design No. 18) aligning the vertical stitches at the center of the ring with those on the flower. ee Photo 13 nsert the small end of the flower button (Design No. 17) through one side of the center eyelet from the top down through both the flower and the napkin ring. Bring the small end of the flower button back up through the other side of the center eyelet from the bottom up. Photo 12 Photo 13 Continue to bring the small end of the flower center back through the center open area of the large end of the flower center. To use, insert the bar on one end of the napkin ring into the eyelet on the opposite end. ONE-PECE NAPKN RNG: titch one Design No. 16 for each napkin ring desired. When dry, insert the buttonette on one side of the napkin ring into the eyelet on the other side and place napkin into the center. BUTTONED VAE: For each vase, stitch Design No. 19 four times. nsert the buttonettes of one piece into the eyelets of the next piece until all four pieces are buttoned together. Finish buttoning the fourth side buttoning it into the first side. nsert artificial flowers or use a bud vial to hold fresh flowers. Expressive Lace 2005 Blosil Enterprises, LLC. Produced under license OED, nc. All Rights Reserved. ee Back of packaging for specific Crafter s Collection usage terms.

10 GOBLET CHAR: titch one Design No. 20 for each charm. titch each goblet charm in a different color to help your guests identify the glasses throughout an evening of entertaining. FVE-DED BAKET WTH LD: titch one basket (Design No. 21) and one lid (Design No. 22). nsert each side of the basket into the eyelet on the opposite side. nsert the buttonettes of the basket lid into the eyelets on the next side of the lid. Place the lid over the completed basket. GLA VOLTVE COVER: (Design No. 23 and Base No. 24) PLEAE NOTE: These designs are meant to be used as a cover for a glass candleholder. CANDLE HOULD NEVER BE PLACED NDE THE VOLTVE COVER WTHOUT THE PROTECTON OF A GLA HOLDER. NEVER LEAVE A BURNNG CANDLE UNATTENDED. titch one each of Designs No. 23 and No. 24. f desired, you may add lettering of your choice into the center of Design No. 23 using your machine s lettering capabilities or your embroidery software. nsert the buttonettes on the back of the design into the eyelets on the front to form a circle. nsert the buttonettes on the side of each petal of the candle Photo 14 cover bottom piece (Design No. 24) into the eyelet of the next petal. Place the previously buttoned wrap (Design No. 23) in the center of the bottom piece (Design No. 24) with the buttonettes down. nsert the buttonettes into the eyelets at the base of each of the petals on the bottom piece. ee Photo14 BOTTLE CHAR and CHAR LABEL: titch the bottle charm. (Design No. 25) Place charm on the neck of the chosen bottle while still damp and mold to the shape of the bottle. Photo 15 titch your choice of label designs (Design No. 27 or Design No. 36). NOTE: f desired, you may use your machine s lettering capabilities or your embroidery software to add lettering in the center of either label. When both the label and the charm are dry, insert the lowest buttonette on each side of the lower front of the charm into the eyelets of the label. ee Photo15 FOUR-DED BAKET: titch one basket design (Design No. 26) nsert the two buttonettes on each side of the basket into the eyelets on the next side of the basked. GLA VOLTVE COVER: Refer to Photos for Design # 23 and Design #24. PLEAE NOTE: These designs are meant to be used as a cover for a glass candleholder. CANDLE HOULD NEVER BE PLACED NDE THE VOLTVE COVER WTHOUT THE PROTECTON OF A GLA HOLDER. NEVER LEAVE A BURNNG CANDLE UNATTENDED. nsert the buttonettes on one end of the wrap (Design No. 29) into the eyelets on the other end. nsert the buttonettes on the side of each petal of the bottom piece (Design No. 30) into the eyelet of the next petal. Place the previously buttoned Design No. 29 in the center of Design No. 30. nsert the buttonettes on the lower edge of the cover into the eyelets at the base of each of the petals on the bottom piece. Expressive Lace 2005 Blosil Enterprises, LLC. Produced under license OED, nc. All Rights Reserved. ee Back of packaging for specific Crafter s Collection usage terms.

11 LARGE LACE DOLY: titch Design No. 31 four times. nsert the buttonettes of one piece into the eyelets of the next piece until a complete circle is formed. FAUX LANTERN: PLEAE NOTE: The lantern is intended for decorative purposes only. t is not intended to be used as a covering for a light bulb. titch lantern side (Design No. 32) five times. titch lantern hanger (Design No. 33) once. nsert the buttonettes on the side of each piece into the eyelets of the next piece until all five sides are buttoned together. nsert a hanger buttonette into each of the five upper eyelets of the lantern. LACED VAE: titch the vase bottom (Design No. 34) once. titch the vase sides (Design No. 35) four times. Place two side pieces together with narrow end at the top. Lace the two pieces together staring at the top and ending at Photo 16 the bottom. NOTE: f desired, you may stitch the sidepieces together with a zigzag stitch instead of lacing. Tie the ribbon ends in a knot inside the vase and clip tails. Continue until all four sides are laced together. Place the completed sides over the base and lace the base to the sides through the openings. ee Photo 16 Tie the ribbon in a bow at the end. Expressive Lace 2005 Blosil Enterprises, LLC. Produced under license OED, nc. All Rights Reserved. ee Back of packaging for specific Crafter s Collection usage terms.