Vishay Dale Thin Film Land Patterns

Molded, 25 mil Pitch, Dual-In-Line Thin Film Resistor, Surface Mount Network

OSOP Molded, 25 mil Pitch, Dual-In-Line Thin Film Resistor, Surface Mount Network OSOP Series resistor networks feature a space saving 25 mil lead pitch versus the current 50 mil pitch standard. This allows

Molded, 50 mil Pitch, Dual-In-Line Thin Film Divider, Surface Mount Resistor Network

ORNV (Divider) Molded, 50 mil Pitch, Dual-In-Line Thin Film Divider, Surface Mount Resistor Network ORNV series voltage dividers provide optimum ratio precision, small size and exceptional stability for

High Power Thin Film Wraparound Chip Resistor

High Power Thin Film Wraparound Chip Resistor FEATURES High purity ceramic substrate Power rating to 2.5 W Resistance range 10 to 30.1 k Resistor tolerance to ± 0.1 % TCR to ± 25 ppm/ C Flame resistant

High Frequency (up to 40 GHz) Resistor, Thin Film Surface Mount Chip

FC High Frequency (up to 40 GHz) Resistor, Thin Film Surface Mount Chip FC series chip resistors are designed with low internal reactance. They function as almost pure resistors on a very high range of

Molded, SOT-23 Thin Film Resistor, Surface Mount Divider Network

MPM (Divider) Molded, SOT-23 Thin Film Resistor, Surface Mount Divider Network MPM Series Dividers provide ± 2 ppm/ C tracking and a ratio tolerance as tight as 0.01 %, small size, and exceptional stability

Ceramic Sandwich, Single-In-Line Thin Film Resistor, Through Hole Network (Low Profile 0.20 Custom)

CS Ceramic Sandwich, Single-In-Line Thin Film Resistor, Through Hole Network (Low Profile 0.20 Custom) Actual Size presents a design concept in precision thin film resistor networks. The essence of this

INTERACTIVE. data book. Vishay Dale thin film products. vishay Dale thin film

VISHAY INTERTECHNOLOGY, INC. INTERACTIVE data book Vishay Dale thin film products vishay Dale thin film vse-db0024-1309 s: 1. To navigate: a) Click on the Vishay logo on any datasheet to go to the Contents

Sherlock Solder Models

Introduction: Sherlock Solder Models Solder fatigue calculations in Sherlock are accomplished using one of the many solder models available. The different solder models address the type of package that

INDEX BY DEVICE TYPE OF REGISTERED MICROELECTRONIC OUTLINES (MO) REGISTRATION NO.

AXIAL QUAD 1.56 mm (.065") Pitch MO-010 Pins: 12 2.54 mm (.100") Pitch MO-017 Pins: 52, 64 BALL GRID ARRAY (BGA) Tape BGA 1, 1.27. 1.5 mm Pitch Pins: 100 thru 2401 Plastic BGA 1, 1.27, 1.5mm Pitch Pins:

For details on Vishay Siliconix MOSFETs, visit

SiXXXX For details on MOSFETs, visit /mosfets/ Revision: 6-Oct-09 Document Number: 65580 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

Handbook. Hermetic Packages Outlines. HD rev1o of X-REL Semiconductor. RELEASE

Handbook Hermetic Packages Outlines HD-00112-11 rev1o 2017-09-05 1 of 12 Table of Contents 1 Ceramic Side Brazed Dual-in-Line (CDIP)... 3 2 Ceramic Small Outline IC (CSOIC)... 6 3 Ceramic Gull-Wing Formed

PI5A100 Precision, Wide Bandwidth 4PDT Analog Switch

Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with V supply) Minimizes Distortion and Error Voltages On-Resistance Matching Between Channels,.Ω

Low Cost JFET Input Operational Amplifiers ADTL082/ADTL084

Preliminary Technical Data FEATURES TL082 / TL08 compatible Low input bias current: 0 pa max Offset voltage: 5mV max (ADTL082A/ADTL08A) 9 mv max (ADTL082/ADTL08) ±5 V to ±5 V operation Low noise: 5 nv/

N-Channel 30-V (D-S) MOSFET

New Product N-Channel 30-V (D-S) MOSFET SiS42DN PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a Q g (Typ.) 30 D 8 0.024 at V GS = 0 V 2 0.030 at V GS = 4.5 V 2 D 7 D 6 PowerPAK 22-8 D 5 S S 2 3.30 mm 3.30

Brief Introduction of Sigurd IC package Assembly

Brief Introduction of Sigurd IC package Assembly Content Package Development Trend Product Brief Sawing type QFN Representative MEMS Product LGA Light Sensor Proximity Sensor High Yield Capability Low

MM74HC00 Quad 2-Input NAND Gate

Quad 2-Input NAND Gate General Description The MM74HC00 NAND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption of standard

AD864/AD8642/AD8643 TABLE OF CONTENTS Specifications... 3 Electrical Characteristics... 3 Absolute Maximum Ratings... 5 ESD Caution... 5 Typical Perfo

FEATURES Low supply current: 25 µa max Very low input bias current: pa max Low offset voltage: 75 µv max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±3 V Rail-to-rail output Unity-gain

Union Semi s Analog Switch Product Presentation

Union Semi s Analog Switch Product Presentation Oct. 10 2010 What is Analog Switch? Ideal Switch: Input signal applied to the left I/O results in an identical output signal at the right I/O. The switches

74AC00 74ACT00 Quad 2-Input NAND Gate

Quad 2-Input NAND Gate General Description The AC/ACT00 contains four 2-input NAND gates. Ordering Code: Features I CC reduced by 50% Outputs source/sink 24 ma ACT00 has TTL-compatible inputs November

MM74HC132 Quad 2-Input NAND Schmitt Trigger

Quad 2-Input NAND Schmitt Trigger General Description The MM74HC132 utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as well

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD IEC 61188-7 Edition 1.0 2009-05 Printed boards and printed board assemblies Design and use Part 7: Electronic component zero orientation for CAD library construction IEC 61188-7:2009(E)

AD8613/AD8617/AD8619. Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers PIN CONFIGURATIONS FEATURES APPLICATIONS

Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers FEATURES Offset voltage: 2.2 mv maximum Low input bias current: pa maximum Single-supply operation:.8 V to 5 V Low

TOLERANCE FORGOTTEN: IMPACTS OF TODAY S COMPONENT PACKAGING AND COPPER ROUTING ON ELECTRONIC

TOLERANCE FORGOTTEN: IMPACTS OF TODAY S COMPONENT PACKAGING AND COPPER ROUTING ON ELECTRONIC Presented By: Dale Lee E-mail: Dale.Lee@Plexus.Com April 2013 High Layer Counts Wide Range Of Component Package

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 74LCX125 Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs General

HANA Semiconductor (Ayutthaya) Co. Ltd. Die Design Rule For Assembly Of Plastic Devices

HANA Semiconductor (Ayutthaya) Co. Ltd. Die Design Rule For Assembly Of Plastic Devices 1.0 PURPOSE : 1.1 To define the rules to be observed to facilitate review of process ability of devices prior to

HI-8190, HI-8191, HI , Quad, SPST, 3.3V / 5.0V compatible Analog Switch

October 2017 GENERAL DESCRIPTION HI-8190, HI-8191, HI-8192 12, Quad, SPST, 3.3V / 5.0V compatible Analog Switch EATURES The HI-8190 is a quad analog CMOS switch fabricated with Silicon-on-Insulator (SOI)

SMT in Practice. Special Seminar III. Dr. Peter W. Pachowicz Department of Electrical and Computer Engineering Volgenau School of Engineering

Special Seminar III SMT in Practice Dr. Peter W. Pachowicz Department of Electrical and Computer Engineering Volgenau School of Engineering This seminar is dedicated to students taking senior design project

MM74HC4066 Quad Analog Switch

MM74HC4066 Quad Analog Switch General Description The MM74HC4066 devices are digitally controlled analog switches utilizing advanced silicon-gate CMOS technology. These switches have low ON resistance

P4C1257/P4C1257L. ULTRA HIGH SPEED 256K x 1 STATIC CMOS RAMS FEATURES DESCRIPTION. Full CMOS. Separate Data I/O

P4C1257/P4C1257L ULTRA HIGH SPEED 256K x 1 STATIC CMOS RAMS FEATURES Full CMOS High Speed (Equal Access and Cycle s) 12/15/20/25 ns (Commercial) 12/15/20/25 ns (Industrial) 25/35/45/55/70 ns (Military)

Low Power, Rail-to-Rail Output, Precision JFET Amplifiers AD8641/AD8642/AD8643

Data Sheet Low Power, Rail-to-Rail Output, Precision JFET Amplifiers AD864/AD8642/AD8643 FEATURES Low supply current: 25 μa max Very low input bias current: pa max Low offset voltage: 75 μv max Single-supply

Department of EECS. University of California, Berkeley. Logic gates. September 1 st 2001

Department of EECS University of California, Berkeley Logic gates Bharathwaj Muthuswamy and W. G. Oldham September 1 st 2001 1. Introduction This lab introduces digital logic. You use commercially available

HI-8444, HI-8445, HI-8448

December 2016 DESCRIPTION The HI-8444 and HI-8445 are quad ARINC 429 line receiver ICs available in a 20-pin TSSOP package. The HI- 8448 contains 8 independent ARINC 429 line receivers. The technology

MM74HC132 Quad 2-Input NAND Schmitt Trigger

Quad 2-Input NAND Schmitt Trigger General Description The utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as well as the capability

Improve SMT Assembly Yields Using Root Cause Analysis in Stencil Design

Improve SMT Assembly Yields Using Root Cause Analysis in Stencil Design Greg Smith FCT Assembly, Inc. gsmith@fctassembly.com This paper and presentation was first presented at the 2017 IPC Apex Expo Technical

Precision Instrumentation Amplifier AD524

Precision Instrumentation Amplifier AD54 FEATURES Low noise: 0.3 μv p-p at 0. Hz to 0 Hz Low nonlinearity: 0.003% (G = ) High CMRR: 0 db (G = 000) Low offset voltage: 50 μv Low offset voltage drift: 0.5

74LCX125 Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs

Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs General Description The LCX125 contains four independent non-inverting buffers with 3-STATE outputs. The inputs tolerate voltages up to 7V allowing

MCP6031/2/3/ µa, High Precision Op Amps. Features. Description. Applications. Design Aids. Package Types. Typical Application

0.9 µa, High Precision Op Amps Features Rail-to-Rail Input and Output Low Offset Voltage: ±150 µv (maximum) Ultra Low Quiescent Current: 0.9 µa Wide Power Supply Voltage: 1.8V to 5.5V Gain Bandwidth Product:

Throughout the course best practice will be observed as described in International Standard IPC 610.

SOLDERING COURSE 560: 3 DAYS: Max 8 Candidates This provides all the skills necessary to work on modern electronic printed circuit boards. It is intended for candidates who have an understanding of electronics

Automotive P-Channel 40 V (D-S) 175 C MOSFET

Automotive P-Channel 40 V (D-S) 75 C MOSFET SQS40EN PRODUCT SUMMARY V DS (V) - 40 R DS(on) (Ω) at V GS = - 0 V 0.09 R DS(on) (Ω) at V GS = - 4.5 V 0.047 I D (A) - 6 Configuration Single PowerPAK -8 FEATURES

P4C147 ULTRA HIGH SPEED 4K x 1 STATIC CMOS RAM

ULTRA HIGH SPEED 4K x 1 STATIC CMOS RAM FEATURES Full CMOS, 6T Cell High Speed (Equal Access and Cycle Times) 1/1/15//5 (Commercial) 15//5/35 (Military) Low Power Operation 715 mw Active 1 (Commercial)

Metal-film MELF 0204 & Metal thin-film chip 1206 Comparison chart

Metal-film MELF 004 & Metal thin-film chip 06 Comparison chart Doc. ID: RDAS-094 / Prepared by: Johnny Wu / Date: 0-09-4 / Rev.: 03-05-0 Mechanical Comparison Metal-film MELF 004 Metal thin-film chip 06

MK74CB218 DUAL 1 TO 8 BUFFALO CLOCK DRIVER. Description. Features. Block Diagram DATASHEET. Family of IDT Parts

DTSHEET MK74CB218 Description The MK74CB218 Buffalo is a monolithic CMOS high speed clock driver. It consists of two identical single input to eight low-skew output, non-inverting clock drivers. This eliminates

I/O 1 I/O 2 I/O 3 A 10 6

Features High speed 12 ns Fast t DOE CMOS for optimum speed/power Low active power 495 mw (Max, L version) Low standby power 0.275 mw (Max, L version) 2V data retention ( L version only) Easy memory expansion

An introduction to surface mounting

Data Pack H Issued March 1997 232-5569 An introduction to surface mounting What is surface mounting? In conventional board assembly technology the component leads are inserted into holes through the and

74F32 Quad 2-Input OR Gate

74F32 Quad 2-Input OR Gate General Description This device contains four independent gates, each of which performs the logic OR function. Ordering Code: April 1988 Revised August 2000 74F32 Quad 2-Input

General-Purpose CMOS Rail-to-Rail Amplifiers AD8541/AD8542/AD8544

General-Purpose CMOS Rail-to-Rail Amplifiers AD854/AD8542/AD8544 FEATURES Single-supply operation: 2.7 V to 5.5 V Low supply current: 45 μa/amplifier Wide bandwidth: MHz No phase reversal Low input currents:

Ultralow Distortion Current Feedback ADC Driver ADA4927-1/ADA4927-2

FEATURES Extremely low harmonic distortion 117 HD2 @ 10 MHz 85 HD2 @ 70 MHz 75 HD2 @ 100 MHz 122 HD3 @ 10 MHz 95 HD3 @ 70 MHz 85 HD3 @ 100 MHz Better distortion at higher gains than F amplifiers Low input-referred

550-xx mm LED CBI. Circuit Board Indicator Sloped Back Housing, Quad Block x x x 4

5.97 [.235] 3.0 [.118] 5mm LED CBI Circuit Board Indicator Sloped Back Housing, Quad Block 2.97 [.117] Features.35 [.250].35 [.250] 25 [.984] ID RECOMMENDED P.C. HOLE PATTERN 4.9 [.185] A Red Cathode for

Improve SMT Assembly Yields Using Root Cause Analysis in Stencil Design

Improve SMT Assembly Yields Using Root Cause Analysis in Stencil Design Greg Smith FCT Assembly, Inc. gsmith@fctassembly.com This paper and presentation was first presented at the 2017 IPC Apex Expo Technical

Workshop Part Identification Lecture N I A G A R A C O L L E G E T E C H N O L O G Y D E P T.

Workshop Part Identification Lecture N I A G A R A C O L L E G E T E C H N O L O G Y D E P T. Identifying Resistors Resistors can be either fixed or variable. The variable kind are called potentiometers

N-Channel 12-V (D-S) MOSFET

Si702DN N-Channel 2-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) e Q g (Typ.) 2 D 8 D 7 0.0038 at V GS = 4.5 V 35 0.0047 at V GS = 2.5 V 35 D 6 PowerPAK 22-8 D 5 S S 2 3.30 mm 3.30 mm Bottom

Vishay Thin Film Product Training Module: Quick-Net : Custom Precision Resistor Networks - Prototypes to Production

Product Training Module: Quick-Net : Custom Precision Resistor Networks - Prototypes to Production Quick-Net Custom Resistor Networks Overview Features and benefits Applications Summary How to get started

PCB Design (with EAGLE tutorial) TA: Robert Likamwa ELEC 424, Fall 2010

PCB Design (with EAGLE tutorial) TA: Robert Likamwa ELEC 424, Fall 2010 Printed Circuit Boards What are they? How can I make one? 424 Project description Eagle Tutorial http://www.electronicmanufacturers.co.za/

TABLE OF CONTENTS Features... Applications... General Description... Pin Configurations... Revision History... 2 Specifications... 3 Electrical Charac

6 V Rail-to-Rail Operational Amplifiers AD86/AD866/AD867 FEATURES Single-supply operation: 4. V to 6 V Input capability beyond the rails Rail-to-rail output swing Continuous output current: 3 ma Peak output

550-xx07. 5mm LED CBI Circuit Board Indicator Sloped Back Housing with Standoffs x x Features

5mm LED CBI Circuit Board Indicator Sloped Back Housing with Standoffs 550-xx07.10 [.240] 3.0 [.118] 3.8 [.145].10 [.240] 4.83 [.190] Red Cathode for Red/Green Bi-Color Cathode for /Green Bi-Color 5.21

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers AD8605/AD8606/AD8608

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers AD8605/AD8606/AD8608 FEATURES Low offset voltage: 65 μv maximum Low input bias currents: pa maximum Low noise: 8 nv/ Hz Wide

N-Channel 30 V (D-S) MOSFET

New Product SiSA8ADN N-Channel 3 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) (Max.) I D (A) f Q g (Typ.) 3.75 at V GS = V 38.3. at V GS =.5 V 3. 6.9 nc PowerPAK -8 D 8 D 7 D 6 D 5 S 3.3 mm 3.3

Highperformance EE PLD ATF22V10B. Features. Logic Diagram. Pin Configurations. All Pinouts Top View

* Features Industry Standard Architecture Low-cost Easy-to-use Software Tools High-speed, Electrically-erasable Programmable Logic Devices 7.5 ns Maximum Pin-to-pin Delay Several Power Saving Options Device

Dual N-Channel 20 V (D-S) MOSFET

Dual N-Channel V (D-S) MOSFET Si73DN PRODUCT SUMMARY V DS (V) R DS(on) () I D (A) Q g (TYP.). at V GS =.5 V 5 f nc.6 at V GS =.5 V 5 f. at V GS =.8 V.6 PowerPAK -8 Dual D D 6 5 D 7 D 8 FEATURES TrenchFET

P-Channel 30 V (D-S) MOSFET

New Product Si7DN P-Channel 3 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) Max. I D (A) Q g (Typ.) - 3.7 at V GS = - V - 35 d 3 nc.3 at V GS = -.5 V - 35 d FEATURES TrenchFET Power MOSFET % R g

Bob Willis Process Guides

What is a Printed Circuit Board Pad? What is a printed circuit board pad, it may sound like a dumb question but do you stop to think what it really does and how its size is defined and why? A printed circuit

Dual N-Channel 30-V (D-S) MOSFET

New Product Dual N-Channel 3-V (D-S) MOSFET Si7DN PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) Q g (Typ.) Channel 3 Channel 3.3 at V GS = V 6 a. nc. at V GS =. V 6 a.8 at V GS = V 6 a. nc.3 at V GS =.

Benzocyclobutene Polymer dielectric from Dow Chemical used for wafer-level redistribution.

Glossary of Advanced Packaging: ACA Bare Die BCB BGA BLT BT C4 CBGA CCC CCGA CDIP or CerDIP CLCC COB COF CPGA Anisotropic Conductive Adhesive Adhesive with conducting filler particles where the electrical

Electronic materials and components-semiconductor packages

Electronic materials and components-semiconductor packages Semiconductor back-end processes We will learn much more about semiconductor back end processes in subsequent modules, but you need to understand

N-Channel 20-V (D-S) MOSFET

New Product SiS38DN N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a, g Q g (Typ.).95 at V GS = V 6.5 at V GS =.5 V 6 7.3 nc PowerPAK -8 FEATURES Halogen-free According to IEC

N-Channel 30 V (D-S) MOSFET

SiS7DN N-Channel 3 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a, g Q g (Typ.) 3 D 8 D 7.89 at V GS = V. at V GS =.5 V D 6 PowerPAK -8 D 5 S S 3.3 mm 3.3 mm Bottom View S 3 G 9.8 nc Ordering

Automotive N-Channel 60 V (D-S) 175 C MOSFET

Automotive N-Channel 60 V (D-S) 75 C MOSFET SQ744AEN PRODUCT SUMMARY V DS (V) 60 R DS(on) (Ω) at V GS = 0 V 0.06 R DS(on) (Ω) at V GS = 4.5 V 0.036 I D (A) 6 Configuration Single Package PowerPAK -8 PowerPAK

Dual N-Channel 40 V (D-S) MOSFET

Dual N-Channel 4 V (D-S) MOSFET SiSB46DN PRODUCT SUMMARY V DS (V) R DS(on) () MAX. I D (A) f Q g (TYP.) 4 3.3 mm.7 at V GS = V 34.58 at V GS = 4.5 V 9.4 Top View PowerPAK -8 Dual 3.33 mm D D 6 5 4 G Bottom

Highperformance EE PLD ATF22V10B ATF22V10BQ ATV22V10BQL

* Features Industry Standard Architecture Low-cost Easy-to-use Software Tools High-speed, Electrically-erasable Programmable Logic Devices 7.5 ns Maximum Pin-to-pin Delay Several Power Saving Options Device

25 mil or 50 mil Pitch, Termination Thin Film Surface Mount Resistor/Capacitor Network

25 mil or 50 mil Pitch, Termination Thin Film Surface Mount Resistor/Capacitor Network Small outline, surface mount, EMI/RFI reduction If your design calls for the elimination of transmission line effects

N-Channel 40 V (D-S) MOSFET

N-Channel 4 V (D-S) MOSFET SiSA7DN PRODUCT SUMMARY V DS (V) R DS(on) () (MAX.) I D (A) f, g Q g (TYP.).35 at V GS = V 6 4 9.5 nc.48 at V GS = 4.5 V 6 3.3 mm Top View PowerPAK -8 Single D 8 3.3 mm 4 G Bottom

74AC244 74ACT244 Octal Buffer/Line Driver with 3-STATE Outputs

74AC244 74ACT244 Octal Buffer/Line Driver with 3-STATE Outputs General Description The AC/ACT244 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and

N-Channel 30-V (D-S) Fast Switching MOSFET

N-Channel 30-V (D-S) Fast Switching MOSFET Si7DN PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) Q g (Typ.) 30 0.0075 at V GS = 0 V 8.3 0.00 at V GS =.5 V 5.9.5 PowerPAK -8 FEATURES Halogen-free Option Available

Low TCR Dual 1:5 Rejustor Micro-Resistor MBD-103-CS

Low TCR Dual 1:5 Rejustor Micro-Resistor MBD-103-CS The Rejustor is a precision, electrically-adjustable resistor from Microbridge. The Rejustor can be adjusted to a precision of 0.1%, or better. The Rejustor

Improved Quad CMOS Analog Switches

Improved Quad CMOS Analog Switches DESCRIPTION The analog switches are highly improved versions of the industry-standard DG2A, DG22. These devices are fabricated in proprietary silicon gate CMOS process,

74AC04 74ACT04 Hex Inverter

74AC04 74ACT04 Hex Inverter General Description The AC/ACT04 contains six inverters. Ordering Code: Features I CC reduced by 50% on 74AC only Outputs source/sink 24 ma ACT04 has TTL-compatible inputs November

Triple 2-Channel Analog Multiplexer/Demultiplexer

November 1983 Revised April 2002 CD4051BC CD4052BC CD4053BC Single 8-Channel Analog Multiplexer/Demultiplexer Dual 4-Channel Analog Multiplexer/Demultiplexer Triple 2-Channel Analog Multiplexer/Demultiplexer

General-Purpose CMOS Rail-to-Rail Amplifiers AD8541/AD8542/AD8544

General-Purpose CMOS Rail-to-Rail Amplifiers FEATURES Single-supply operation: 2.7 V to 5.5 V Low supply current: 45 μa/amplifier Wide bandwidth: MHz No phase reversal Low input currents: 4 pa Unity gain

High Temperature, Low Drift, Micropower 2.5 V Reference ADR225

Data Sheet FEATURES Extreme high temperature operation 4 C to + C, 8-lead FLATPACK 4 C to +75 C, 8-lead SOIC Temperature coefficient 4 ppm/ C, 8-lead FLATPACK ppm/ C, 8-lead SOIC High output current: ma

SGM8271/2/4 High Voltage Rail-to-Rail Output Operational Amplifiers

GENERAL DESCRIPTION The SGM8271 (single), SGM8272 (dual) and SGM8274 (quad) are high voltage operational amplifiers that are designed to offer a wide input common mode voltage range and output voltage

HVQFN (thermal enhanced very thin quad flatpack; no leads) P (plastic) MO-220 S (surface mount) Issue date Manufacturer package code

HVQFN48 plastic thermal enhanced very thin quad flat package; no leads; 48 terminals; 7 mm x 7 mm x 0.85 mm 5 February 2018 Package information 1. Package summary Table 1. Package summary Terminal position

ATOZ PP-050. A unique and highly flexible Pick & Place machine that produces small to medium batches & prototypes for the SMT industry.

ATOZ PP-050 A unique and highly flexible Pick & Place machine that produces small to medium batches & prototypes for the SMT industry. Features and Benefits Suitable for small to medium batches and prototypes

Quad Picoampere Input Current Bipolar Op Amp AD704

a FEATURES High DC Precision 75 V Max Offset Voltage V/ C Max Offset Voltage Drift 5 pa Max Input Bias Current.2 pa/ C Typical I B Drift Low Noise.5 V p-p Typical Noise,. Hz to Hz Low Power 6 A Max Supply

What Can No Longer Be Ignored In Today s Electronic Designs. Presented By: Dale Lee

What Can No Longer Be Ignored In Today s Electronic Designs Presented By: Dale Lee E-mail: Dale.Lee@Plexus.Com 24 January 2008 Introduction Component packaging technology continues to decrease in size

NJU7026/NJU7027/NJU7028

NJU76/NJU77/NJU78 μa/ch, Rail-to-Rail Output CMOS Operational Amplifier FEATURES (V + =5V, V - =V, Ta=5 C, typ.) Supply Current (All Amplifiers) NJU76 µa NJU77 6µA NJU78 8µA Supply Voltage.8V to 5.5V Gain

100LVELT22 3.3V Dual LVTTL/LVCMOS to Differential LVPECL Translator

3.3V Dual LVTTL/LVCMOS to Differential LVPECL Translator General Description The is a LVTTL/LVCMOS to differential LVPECL translator operating from a single +3.3V supply. Both outputs of a differential

ATTENUATORS FIXED COAXIAL

ATTENUATORS FIXED COAXIAL SV Microwave manufactures a complete line of standard and custom-designed attenuators, including QPL and Hi-Rel versions. A variety of connector configurations are available,

Multiplexer/Demultiplexer Triple 2-Channel Analog Multiplexer/Demultiplexer

November 1983 Revised January 1999 CD4051BC CD4052BC CD4053BC Single 8-Channel Analog Multiplexer/Demultiplexer Dual 4-Channel Analog Multiplexer/Demultiplexer Triple 2-Channel Analog Multiplexer/Demultiplexer

High Power Aluminum Nitride, Wraparound Surface Mount, Precision Thin Film Non-Magnetic Chip Resistor (up to 6 W)

High Power Aluminum Nitride, Wraparound Surface Mount, Precision hin Film Non-Magnetic Chip Resistor (up to 6 W) FEAURES High thermal conductivity aluminum nitride substrate Power rating up to 6.0 W Resistance

Low-Voltage Switchmode Controller

End of Life. Last Available Purchase Date is 31-Dec-2014 Si9145 Low-Voltage Switchmode Controller FEATURES 2.7-V to 7-V Input Operating Range Voltage-Mode PWM Control High-Speed, Source-Sink Output Drive

P-Channel 40-V (D-S) MOSFET

New Product P-Channel -V (-S) MOSFET Si76N PROUCT SUMMARY V S (V) R S(on) (Ω) I (A) Q g (Typ.) -.5 at V GS = - V - 8 e nc.33 at V GS = -.5V - 8 e PowerPAK -8 FEATURES Halogen-free TrenchFET Power MOSFET

SGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8621/2/3/4 3MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The SGM8621 (single), SGM8622 (dual), SGM8623 (single with shutdown) and SGM8624 (quad) are low noise, low voltage, and low power operational amplifiers,

DATASHEET HIP2101. Features. Ordering Information. Applications. 100V/2A Peak, Low Cost, High Frequency Half Bridge Driver

DATASHEET P20 00V/2A Peak, Low Cost, High Frequency Half Bridge Driver FN9025 Rev 9.00 The P20 is a high frequency, 00V Half Bridge N-Channel power MOSFET driver IC. It is equivalent to the P200 with the

SALLEN-KEY LOW PASS FILTER

DATASHEET ISL28325, ISL28345 40V Low Power Dual and Quad Operational Amplifier The ISL28325 and ISL28345 are dual and quad general purpose amplifiers featuring low noise vs power consumption. The combination

256/512/1K/2K/4K x 9 Asynchronous FIFO

256/512/1K/2K/4K x 9 Asynchronous FIFO CY7C419/21/25/29/33 256/512/1K/2K/4K x 9 Asynchronous FIFO Features Asynchronous first-in first-out (FIFO) buffer memories 256 x 9 (CY7C419) 512 x 9 (CY7C421) 1K

74LVT245 74LVTH245 Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

74LVT245 74LVTH245 Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs General Description The LVT245 and LVTH245 contain eight non-inverting bidirectional buffers with 3-STATE outputs

High Precision Wraparound - Wide Ohmic Value Range Thin Film Chip Resistors

P Vishay Sfernice High Precision Wraparound - Wide Ohmic Value Range For low noise and precision applications, superior stability, low temperature coefficient of resistance, and low voltage coefficient,

USB1T11A Universal Serial Bus Transceiver

Universal Serial Bus Transceiver General Description The USB1T11A is a one chip generic USB transceiver. It is designed to allow 5.0V or 3.3V programmable and standard logic to interface with the physical

MM74HCU04 Hex Inverter

MM74HCU04 Hex Inverter General Description The MM74HCU04 inverters utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption of standard

ISL62881CCPUEVAL2Z Evaluation Board User Guide

Application Note AN55 ISL688CCPUEVALZ Evaluation Board User Guide Hardware Description The ISL688CCPUEVALZ evaluation board demonstrates the performance of the ISL688C single-phase synchronous-buck PWM