INTERACTIVE. data book. Vishay Dale thin film products. vishay Dale thin film

Transcription

1 VISHAY INTERTECHNOLOGY, INC. INTERACTIVE data book Vishay Dale thin film products vishay Dale thin film vse-db s: 1. To navigate: a) Click on the Vishay logo on any datasheet to go to the Contents page for that section. Click on the Vishay logo on any Contents page to go to the main Table of Contents page. b) Click on the products within the Table of Contents to go directly to the datasheet. c) Use the scroll or page up/page down functions. d) Use the Adobe Acrobat page function in the browser bar. 2. To search the text of the catalog use the Adobe Acrobat search function. One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components

2 RESISTORS Vishay Intertechnology, Inc. Surface Mount Networks Surface Mount Chips Through Hole Networks RC Networks Prototyping Products Data Book One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components VSE-DB QR CODE

3 RESISTORS SEMICONDUCTORS Vishay Intertechnology, Inc. PRODUCT LISTINGS MOSFETS SEGMENT MOSFETs Low-Voltage TrenchFET Power MOSFETs Medium-Voltage Power MOSFETs High-Voltage Planar MOSFETs High-Voltage Super Junction MOSFETs Automotive-Grade MOSFETs ICs Power Management and Power Control ICs Smart Load Switches Analog Switches and Multiplexers DIODES SEGMENT Rectifiers Schottky Rectifiers Ultra-Fast Recovery Rectifiers Standard and Fast Recovery Rectifiers High-Power Rectifiers/Diodes Bridge Rectifiers Small-Signal Diodes Schottky and Switching Diodes Zener Diodes Tuner/Capacitance Diodes Bandswitching Diodes RF PIN Diodes Protection Diodes TVS Diodes or TRANSZORB (uni-directional, bi-directional) ESD Protection Diodes (including arrays) PASSIVE COMPONENTS RESISTORS AND INDUCTORS SEGMENT Film Resistors Metal Film Resistors Thin Film Resistors Thick Film Resistors Metal Oxide Film Resistors Carbon Film Resistors Wirewound Resistors Vitreous, Cemented, and Housed Resistors Braking and Neutral Grounding Resistors Custom Load Banks Power Metal Strip Resistors Chip Fuses Variable Resistors Cermet Variable Resistors Wirewound Variable Resistors Conductive Plastic Variable Resistors Contactless Potentiometers Networks/Arrays Non-Linear Resistors NTC Thermistors PTC Thermistors Varistors Thyristors/SCRs Phase-Control Thyristors Fast Thyristors Power Modules Input Modules (diodes and thyristors) Output and Switching Modules (contain MOSFETs, IGBTs, and diodes) Custom Modules OPTOELECTRONIC COMPONENTS SEGMENT Infrared Emitters and Detectors Optical Sensors Infrared Remote Control Receivers Optocouplers Phototransistor, Photodarlington Linear Phototriac High-Speed IGBT and MOSFET Driver Solid-State Relays LEDs and 7-Segment Displays Infrared Data Transceiver Modules Custom Products Magnetics Inductors Transformers Coils Connectors CAPACITORS SEGMENT Tantalum Capacitors Molded Chip Tantalum Capacitors Coated Chip Tantalum Capacitors Solid Through-Hole Tantalum Capacitors Wet Tantalum Capacitors Ceramic Capacitors Multilayer Chip Capacitors Disc Capacitors Film Capacitors Power Capacitors Heavy-Current Capacitors Aluminum Capacitors VSE-DB

4 Vishay Dale Thin Film Products Vishay Intertechnology, Inc. Vishay Thin Film 2160 Liberty Drive Niagara Falls, NY U.S.A. Phone: Fax:

5 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC definition. We confirm that all the products identified as being compliant to IEC conform to JEDEC JS709A standards.

6 Table of Contents SURFACE MOUNT NETWORKS Thin Film Products MP... 4 MPM (Divider)... 6 MPMA (Divider)... 8 MPD, MPDA ORN ORN (Divider) ORNV (Divider) OSOP VTSR, VSSR, VSOR NOMC NOMCA TOMC VSOR2000S WOMC CSO CSOM LCC, TLCC MPH PR100, PR135, PR FP200, FP201, FP DFN DFN (Divider) QFN HTRN SURFACE MOUNT CHIPS E/H (Military M/D55342) E/H (T-Level) (Military M/D55342) E/H (Ta2N) (Military M/D55342) D.S.C.C. Specifications P-NS PTN L-NS M FC PNM PLT PLTT PAT PATT PHP Tape and Reel Specifications Waffle Pack Packaging Revision: 09-Sep-13 1

7 Table of Contents THROUGH HOLE NETWORKS CTSP TSP VTF (Standard) Typical Resistor Network Applications VTF (Custom) TDP CS CSD HD HVPS M83401, C RC NETWORKS VTSRC20-AB, VSSRC20-AB, VSORC20-AB VTSRC20-AC, VSSRC20-AC, VSORC20-AC VTSRC20-AA, VSSRC20-AA, VSORC20-AA VTSRC20-AD, VSSRC20-AD, VSORC20-AD VSSRC VR VSSX PROTOTYPING Quick Chip Prototype Service Guide Quick-Net Prototype Guidelines Quick-Net Prototype Fax Form E6, E12, E24 and E96 Tables Application Guide Revision: 09-Sep-13 2

8 Contents MP... 4 MPM (Divider)... 6 MPMA (Divider)... 8 Surface Mount Networks MPD, MPDA ORN ORN (Divider) ORNV (Divider) OSOP VTSR, VSSR, VSOR NOMC NOMCA TOMC VSOR2000S WOMC CSO CSOM LCC, TLCC MPH PR100, PR135, PR FP200, FP201, FP DFN DFN (Divider) QFN HTRN... 62

9 MP Molded, SC70 Thin Film Resistor, Surface Mount Network MP 4 LEAD Actual Size MP Series Dividers provide ± 2 ppm/ C tracking and a ratio tolerance as tight as ± 0.05 %, ultra small size, 3 or 4 lead package and exceptional stability for all surface mount applications. The standard SC70 package format with common standard resistance values provide easy selection for most applications requiring matched pair resistor elements. If you require a non-standard ratio, consult the applications engineering group as we may be able to meet your requirements. SCHEMATIC 1 3 R 2 3 LEAD VERSION MP 3 LEAD 4 3 R LEAD VERSION FEATURES Small physical size EIAJ SC70 format Tight resistance ratio tolerances ± 0.05 % Available Low TCR tracking ± 2 ppm Excellent long term ratio stability Available ( R ± % at 70 C for 2000 h) Center-tapped or isolated matched pair resistors Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC definition * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 2 ABSOLUTE RATIO TOL STANDARD RESISTANCE VALUES TYPE MP3 MP4 STANDARD VALUES ( ) R 2 ( ) K 1K 10K 10K 1K 10K 50K 1K 10K 50K STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 3, 4 - Resistance Range 100 to 50 k per resistor - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 2 ppm/ C (typical) - 55 C to C Tolerance: Absolute ± 0.10 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.05 % (standard), ± 1.0 % - Power Rating: Resistor W Maximum at + 70 C Power Rating: Package W Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.1 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 20-Oct-11 4 Document Number: 60092

10 MP DIMENSIONS AND IMPRINTING in millimeters SC70 3L D A A2 e2 A1 b2 E1 E B L e L1 SC70 4L D A A2 e A1 b2 b1 E1 E B L L1 DIMENSION MIN. MAX. A A A B b b D E E e e L MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Lead (Pb)-free Option 100 % matte tin Tin Lead Option Sn85 Tin Lead and Lead (Pb)-free Finish Plated DERATING CURVE Percent of Rated Power % = 0.15 W Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MP32001AWS M P A W S M P T B T 1 GLOBAL MODEL (2 or 3 digits) MP (Tin Lead) MPT (Lead (Pb)-free) (e3) LEADS 3 4 RESISTANCE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. When like values are required use total resistance. Example: 2001 = 2K (1K/1K) 2002 = 20K (10K/10K) Historical Part Number example: MP32002BW (for reference purposes only) TOLERANCE AND RATIO TOLERANCE Abs. Tol. A = 0.1 % B = 0.1 % C = 0.25 % D = 0.5 % F = 1.0 % Ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % PACKAGING BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T1 = 1000 min., 1000 mult (1) (1) Preferred packaging code MP B W SERIES LEADS RESISTANCE TOLERANCE AND RATIO TOLERANCE PACKAGING Revision: 20-Oct-11 5 Document Number: 60092

11 MPM (Divider) Molded, SOT-23 Thin Film Resistor, Surface Mount Divider Network MPM Series Dividers provide ± 2 ppm/ C tracking and a ratio tolerance as tight as 0.01 %, small size, and exceptional stability for all surface mount applications. The standard SOT-23 package format with unity and common standard resistance divider ratios provide easy selection for most applications requiring matched pair resistor elements. The ratios listed are available for off the shelf delivery. If you require a non-standard ratio, consult the applications engineering group as we may be able to meet your requirements. SCHEMATIC 3 R FEATURES Excellent long term ratio stability ( R ± %, 2000 h, + 70 C) Ratio tolerances to ± 0.01 % Low TCR tracking ± 2 ppm Standard JEDEC TO-236 package variation AB Available Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 2 ABSOLUTE RATIO TOL STANDARD DIVIDER RATIO (R 2 / ) RATIO R 2 ( ) ( ) 100:1 100K 1K 50:1 50K 1K 25:1 25K 1K 20:1 20K 1K 10:1 10K 1K 9:1 9K 1K 6:1 6K 1K 5:1 10K 2K 5:1 5K 1K 4:1 8K 2K 4:1 4K 1K 2:1 10K 5K 2:1 2K 1K 1:1 50K 50K 1:1 25K 25K 1:1 10K 10K 1:1 5K 5K 1:1 2.5K 2.5K 1:1 1K 1K 1: : STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 3 - Resistance Range 250 to 100 k per resistor - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 2 ppm/ C (typical) - 55 C to C Tolerance: Absolute ± 0.05 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.01 % to 0.5 % + 25 C Power Rating: Resistor 100 mw Maximum at + 70 C Power Rating: Package 200 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.2 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 12-Jul-13 6 Document Number: 60001

12 MPM (Divider) DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION INCHES MILLIMETERS MIN. MAX. MIN. MAX. 3 A W A B T B S A H L W L H S A1 J K T Pin # Ø J K Ø MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Lead (Pb)-free Option 100 % matte tin Tin Lead Option Sn85 Tin Lead and Lead (Pb)-free Finish Plated DERATING CURVE Percent of Rated Power % = 0.2 W Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MPM1003AWS M P M A W S M P M T A T 1 GLOBAL MODEL (3 or 4 digits) MPM (Tin lead) MPMT (Lead (Pb)-free) (e3) RESISTANCE (4 or 8 digits) First 3 digits are significant figures and the last digit specifies the number of zeros to follow. When like values are required use total resistance. When dual values are required list both values. Example: (List first in part number with dual values) 1002 = 10K (5K/5K) 1003 = 100K (50K/50K) = 1K/10K divider TOLERANCE AND RATIO TOLERANCE Abs. Tol. A = 0.1 % B = 0.1 % C = 0.25 % D = 0.5 % F = 1 % Z = 0.1 % (1) Q = 0.05 % (1) Historical Part Number example: MPM1002BW (for reference purposes only) Ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % % 0.01 % PACKAGING BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 4000 TS = 100 min., 1 mult MPM 1002 B W SERIES RESISTANCE TOLERANCE AND RATIO TOLERANCE PACKAGING s (1) Tol. available 1K and up equal values only (2) Preferred packaging code Revision: 12-Jul-13 7 Document Number: 60001

13 MPMA (Divider) Matched Pair, Molded, Automotive, Thin Film, SOT-23, Resistor, Surface Mount Network, AEC-Q200 Qualified Vishay Thin Film MPMA Series dividers provide ± 2 ppm/ C tracking and a ratio tolerance as tight as ± 0.05 %, small size, and exceptional stability for all surface mount applications. The standard SOT-23 package format with unity and common standard resistance divider ratios provide easy selection for most applications requiring matched pair resistor elements. MPMA is AEC-Q200 qualified and ideal for high precision automotive applications. The ratios listed are available for off the shelf delivery. If you require a non-standard ratio, consult the applications engineering group as we may be able to meet your requirements. SCHEMATIC 3 R FEATURES AEC-Q200 qualified Resistance range 250 to 50 k Excellent long term ratio stability ± 0.03 % over 1000 h, 125 C Ratio tolerances to ± 0.05 % Tracking as low as ± 2 ppm/ C Very low noise and voltage coefficient (< - 30 db, 0.1 ppm/v) Standard JEDEC TO-236 package variation AB Material categorization: For definitions of compliance please see STANDARD DIVIDER RATIO (R 2 / ) RATIO R 2 ( ) ( ) TCR TRACKING 50:1 50K 1K 10 ppm/ C 25:1 25K 1K 20:1 20K 1K 5 ppm/ C 10:1 10K 1K 9:1 9K 1K 6:1 6K 1K 5:1 10K 2K 3 ppm/ C 5:1 5K 1K 4:1 8K 2K 4:1 4K 1K 2:1 10K 5K 2:1 2K 1K 1:1 50K 50K 1:1 25K 25K 1:1 10K 10K 1:1 5K 5K 2 ppm/ C 1:1 2.5K 2.5K 1:1 1K 1K 1: : STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Ta2N - Pin/Lead Number 3 - Resistance Range 250 to 50 k per resistor - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking Down to ± 2 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.05 % to 0.5 % + 25 C Power Rating: Resistor 100 mw Maximum at + 70 C Power Rating: Package 200 mw Maximum at + 70 C Stability: Absolute < 1 k : ± 0.35 %; > 1 k : ± 0.04 % 1000 h at C Stability: Ratio < 1 k : ± 0.35 %; > 1 k : ± 0.03 % 1000 h at C Voltage Coefficient 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.2 μv/ C - Shelf Life Stability: Absolute R/R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R/R ± % 1 year at + 25 C Revision: 14-Jun-13 8 Document Number: 60113

14 MPMA (Divider) DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION INCHES MILLIMETERS MIN. MAX. MIN. MAX. A W A B B T S A H L W L H S A1 J K 2 T Pin # Ø J K Ø MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Lead (Pb)-free Option Tantalum nitride Ceramic Molded epoxy Copper alloy Solder free leads, Ni/Pd/Au plated DERATING CURVE Percent of Rated Power % = 0.2 W Ambient Temperature C ENVIRONMENTAL TESTS ENVIRONMENTAL TEST CONDITIONS SUGGESTED PRODUCT LIMITS ABS/RATIO MAX. VALUES ABS/RATIO High Temperature Exposure < 1 k : MIL-STD-202, 108, 1000 h at 125 C ± 0.5 %/± 0.5 % ± 0.35 %/± 0.35 % > 1 k : MIL-STD-202, 108, 1000 h at 125 C ± 0.25 %/± 0.1 % ± 0.02 %/± % Temperature Cycling JESD22, JA-104, 1000 cycles at - 55 C to C ± 0.25 %/± 0.1 % ± 0.1%/± % Moisture Resistance MIL-STD-202, 106 ± 0.25 %/± 0.1 % ± 0.03%/± % Biased Humidity MIL-STD-202, 103, 1000 h at 85 C, 85 % RH, 10 % P ± 1.0 %/± 0.5 % ± 0.4 %/± 0.34 % Life < 1 k : MIL-STD-202, 108 at 125 C, 1000 h ± 0.5 %/± 0.5 % ± 0.35 %/± 0.35 % > 1 k : MIL-STD-202, 108 at 125 C, 1000 h ± 0.5 %/± 0.1 % ± 0.04 %/± 0.03 % Mechanical Shock MIL-STD-202, 213, condition C ± 0.25 %/± 0.1 % ± 0.03 %/± % Vibration MIL-STD-204, 10 Hz to 2 khz ± 0.25 %/± 0.1 % ± 0.02 %/± % Resistance to Soldering Heat MIL-STD-202, 210, condition B ± 0.25 %/± 0.1 % ± 0.13 %/± 0.24 % Electrostatic Discharge < 1 k : AEC-Q at 500 V human body ± 0.5 % ± 0.50 % > 1 k : AEC-Q at 1000 V human body ± 0.5 % ± 0.25 % Solderability J-STD-002 method B and B1 Visual Visual Terminal Strength AEC-Q at 1 kg for 60 s ± 0.25 %/± 0.1 % ± 0.02 %/± % Flame Retardance AEC-Q para 4.0 Visual Visual Revision: 14-Jun-13 9 Document Number: 60113

15 MPMA (Divider) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MPMA1003AWS M P M A A T 1 M P M A A T 1 GLOBAL MODEL (3 or 4 digits) MPMA Ni/Pd/Au = e4 termination RESISTANCE (4 or 8 digits) First 3 digits are significant figures and the last digit specifies the number of zeros to follow. When like values are required use total resistance. When dual values are required list both values. Example: (List first in part number with dual values) 1002 = 10K (5K/5K) 1003 = 100K (50K/50K) = 1K/10K divider TOLERANCE AND RATIO TOLERANCE Abs. Tol. A = 0.1 % B = 0.1 % C = 0.25 % D = 0.5 % F = 1 % Ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % PACKAGING TAPE AND REEL T1 = 1000 min., 1000 mult (1) T5 = 500 min., 500 mult TF = Full reel 4000 TP = 100 min., 1 mult (package unit single lot date code) TS = 100 min., 1 mult (1) Preferred packaging code Revision: 14-Jun Document Number: 60113

16 MPD, MPDA Molded, SOT-143 Thin Film Resistor, Surface Mount Network Actual Size MPD Series Dividers provide ± 2 ppm/ C tracking and a ratio tolerance as tight as ± 0.05 %, small size, and exceptional stability for all surface mount applications. The standard SOT-143 package format with unity and common standard resistance divider ratios provide easy selection for most applications requiring matched pair resistor elements. The ratios listed are available for off the shelf convenience, if you require a non-standard ratio, consult the applications engineering group as we may be able to meet your requirements. SCHEMATIC 4 1 MPD 3 2 R 2 R MPDA 3 2 R 3 ( ref) FEATURES Tight ratio tolerances to 0.05 % ± 2 ppm tracking Available Standard values stocked Available Standard JEDEC TO-253 package Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC definition * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 2 ABSOLUTE RATIO TOL STANDARD VALUES MODEL ( ) R 2 ( ) R 3 ( ) 100K 100K - 50K 50K - 25K 25K - MPD 20K 20K - 10K 10K - 5K 5K - 2K 2K - 1K 1K - MPDA 10K 10K 10K STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 4 - Resistance Range 1000 to 100 k per resistor - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 2 ppm/ C (typical) - 55 C to C Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.05 % to ± 0.5 % + 25 C Power Rating: Resistor 100 mw Maximum at + 70 C Power Rating: Package 200 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 25 db - Thermal EMF 0.2 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Tantalum nitride film is available on special orders Revision: 20-Oct Document Number: 60016

17 MPD, MPDA DIMENSIONS AND IMPRINTING in millimeters A A2 B A1 b2 L L1 Ø See View C VIEW C Seating Plane 0.25 Gauge Plane Seating Plane e1 e2 With Plating Base Metal MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Lead (Pb)-free Option Tin Lead Option Tin Lead and Lead (Pb)-free Finish c D e b1 b3 (b) (b2) Passivated nichrome Silicon Molded epoxy Copper alloy 100 % matte tin Sn85 Plated E1 E 3 x b c1 DIMENSION MIN. NOM. MAX. A A A b b b b c c D E E e 1.92 BSC e BSC L L REF. N 4 Ø 0" - 8" DERATING CURVE Precent of Rated Power % = 0.20 W Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MPD1003AWS M P D A W S M P D T A T 1 GLOBAL MODEL (3 or 4 digits) MPD (Two resistors, tin lead) MPDT (Two resistors, lead (Pb)-free) (e3) RESISTANCE (4 or 8 digits) The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. When like values are required use total resistance. Example: 1002 = 10K (5K/5K) 1003 = 100K (50K/50K) TOLERANCE AND RATIO TOLERANCE Abs. Tol. Ratio A = ± 0.1 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1 % Historical Part Number example: MPD1002BW (for reference purposes only) ± 0.05 % ± 0.1 % ± 0.1 % ± 0.1 % ± 0.5 % PACKAGING BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T1 = 1000 min., 1000 mult (1) MPD 1002 B W SERIES RESISTANCE TOLERANCE AND RATIO TOLERANCE PACKAGING (1) Preferred packaging code Revision: 20-Oct Document Number: 60016

18 MPD, MPDA GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MPDAT3002AWS M P D A A W S M P D A T A W S GLOBAL MODEL (4 or 5 digits) MPDA (Three equal series resistors, tin/lead) MPDAT (Three equal series resistors, lead (Pb)-free) (e3) RESISTANCE First 3 digits are significant figures and the last digit specifies the number of zeros to follow. When like values are required use total resistance. Example: 3002 = Three 10 k resistors TOLERANCE AND RATIO TOLERANCE Abs. Tol. Ratio A = ± 0.1 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1 % Historical Part Number example: MPDA3002BT (for reference purposes only) ± 0.05 % ± 0.1 % ± 0.1 % ± 0.1 % ± 0.5 % PACKAGING BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T1 = 1000 min., 1000 mult (1) MPDA 3002 B T SERIES RESISTANCE TOLERANCE AND RATIO TOLERANCE PACKAGING (1) Preferred packaging code Revision: 20-Oct Document Number: 60016

19 ORN Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor, Surface Mount Network ORN series resistor networks feature four isolated resistors with standard 50 mil pitch lead spacing. The networks feature close TCR tracking and tight ratio tolerance and are ideally suited for unity gain operational amplifier circuitry. The standard resistance offering listed are available for immediate delivery. SCHEMATIC Actual Size FEATURES 0.068" (1.73 mm) maximum seated height Rugged molded case construction with no internal solder Low temperature coefficient (± 25 ppm/ C) JEDEC MS-012 STD variation AA package Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL Available Available STANDARD RESISTANCE OFFERING ( =) k k k 1 k 100 k 2 k 200 k 4.99 k 500 k 5 k Consult factory for additional values and schematics STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 8 - Resistance Range 33 to 500 k per resistor - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.05 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.01 % to ± 0.5 % + 25 C Power Rating: Resistor 100 mw Maximum at + 70 C Power Rating: Package 400 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient 0.1 ppm/v (typical) - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 17-Sep Document Number: 60005

20 ORN DIMENSIONS AND IMPRINTING in inches and millimeters A B D C ORNA x x x x I Resistance Value Code Date Code Seating Plane Marking - Vishay symbol, part number from ordering information H ø E F G DIMENSION INCHES MILLIMETERS A ± ± 0.09 B ± ± 0.06 C D ± ± 0.1 E ± ± 0.03 F ± ± 0.4 G ± ± 0.2 H max I ± ± 0.07 Ø 2 to 6 2 to 6 MECHANICAL SPECIFICATIONS DERATING CURVE Resistive Element Substrate Material Body Terminals Lead (Pb)-free Option Tin Lead Option Passivated nichrome Silicon Molded epoxy Copper alloy 100 % matte tin Sn90 Precent of Rated Power % = 0.40 W Tin Lead and Lead (Pb)-free Finish Plated Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: ORNA1002AUF O R N A A U F O R N T A Z T S GLOBAL MODEL (3 or 4 digits) ORN (Tin lead) ORNT (Lead (Pb)-free) (e3) SCHEMATIC A = 4 isolated equal resistors s (1) Tol. available 1K and up (2) Preferred packaging code (3) Ratio tolerance available 250 and up RESISTANCE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. Example: 1002 = 10 k 1003 = 100 k 4991 = 4.99 k 50R0 = 50 TOLERANCE AND RATIO TOLERANCE Abs. Tol. A = ± 0.1 % (3) B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1 % Q = ± 0.05 % (1) Z = ± 0.1 % (1) Ratio ± 0.05 % ± 0.1 % ± 0.1 % ± 0.1 % ± 0.5 % ± 0.01 % ± % PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 3000 TS = 100 min., 1 mult UF = TUBED Historical Part Number example: ORNA1001F (for reference purposes only) ORN A 1001 F SERIES SCHEMATIC RESISTANCE TOLERANCE AND RATIO TOLERANCE Revision: 17-Sep Document Number: 60005

21 ORN (Divider) Molded, 50 mil Pitch, Dual-In-Line Thin Film Divider, Surface Mount Resistor Network ORN series Dividers provide optimum ratio precision, small size and exceptional stability for most applications. They offer a wide ratio range that is listed in the selection guide and are available for immediate delivery. The tight ratio tolerance offered on the standard ratios will provide exceptional performance throughout life. SCHEMATIC Actual Size FEATURES 0.068" (1.73 mm) maximum seated height Rugged molded case construction with no Available internal solder (JEDEC MS-012 variation AA package) Available Low TCR tracking ± 5 ppm/ C Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL STANDARD RESISTANCE OFFERING ( /R 2 ) R 2 R RATIO R 2 100:1 100K 1K 50:1 50K 1K 25:1 25K 1K 20:1 20K 1K 10:1 10K 1K 5:1 10K 2K 2:1 10K 5K STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 8 - Resistance Range 1000 to 100 k per resistor - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % + 25 C Tolerance: Ratio ± 0.05 % + 25 C Power Rating: Resistor 100 mw Maximum at + 70 C Power Rating: Package 400 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Tantalum nitride film is custom, consult factory Revision: 17-Sep Document Number: 60006

22 ORN (Divider) DIMENSIONS AND IMPRINTING in inches and millimeters B E DIMENSION INCHES MILLIMETERS C Part A ± ± 0.09 Number B ± ± 0.06 A ORNA x-x F C G D ± ± 0.1 Date E ± ± 0.03 D Code F ± ± 0.4 ø G ± ± 0.2 H H max I ± ± 0.07 I Ø 2 to 6 2 to 6 Marking - Vishay symbol, part number from ordering information MECHANICAL SPECIFICATIONS DERATING CURVE Resistive Element Substrate Material Body Terminals Lead (Pb)-free Option Passivated nichrome Silicon Molded epoxy Copper alloy 100 % matte tin Precent of Rated Power % = 0.40 W Tin Lead Option Sn90 0 Tin Lead and Lead (Pb)-free Finish Plated Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: ORNA5-1UF O R N A 5-1 U F O R N T A U F GLOBAL MODEL (4 or 5 digits) ORNA (Tin/lead) ORNTA (Lead (Pb)-free) (e3) RESISTANCE (3, 4 or 5 digits) PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 3000 TS = 100 min., 1 mult UF = TUBED Historical Part Number example: ORNA2-1 (for reference purposes only) ORNA2-1 2:1 10K 5K 2 PART NUMBER DIVIDER NETWORK VALUE R 2 VALUE /R 2 RATIO Revision: 17-Sep Document Number: 60006

23 ORNV (Divider) Molded, 50 mil Pitch, Dual-In-Line Thin Film Divider, Surface Mount Resistor Network ORNV series voltage dividers provide optimum ratio precision, small size and exceptional stability for most applications. They offer a wide ratio range that is listed in the selection guide and are available for immediate delivery. The tight ratio tolerance offered on the standard ratios will provide exceptional performance throughout life. SCHEMATIC R 2 (REF) Actual Size FEATURES Close ratio tolerance (0.05 %) Tight TCR tracking ± 5 ppm/ C Available 0.068" (1.73 mm) maximum seated height Rugged molded case construction with no Available internal solder (JEDEC MS-012 variation AA package) Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC definition * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL STANDARD RESISTANCE OFFERING ( ) R 2 ( ) (4 Voltage Divider Resistors) (Reference) 2K 2K 5K 10K 5K 10K 5K, 10K, 20K, 25K, 50K 20K 25K 50K Consult factory for additional values and schematics STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 8 - Resistance Range 2 k to 50 k - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % + 25 C Tolerance: Ratio ± 0.05 % + 25 C Power Rating: Resistor 100 mw Maximum at + 70 C Power Rating: Package 400 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 01-Sep Document Number: 60112

24 ORNV (Divider) DIMENSIONS AND IMPRINTING in inches and millimeters A B C ORNV x-x D I Part Number Date Code H Marking - Vishay symbol, part number from ordering information ø E F G DIMENSION INCHES MILLIMETERS A B ± ± 0.06 C D max E ± ± 0.03 F ± ± 0.02 G ± ± 0.13 H max I ± ± 0.06 Ø 2 to 6 2 to 6 MECHANICAL SPECIFICATIONS DERATING CURVE Resistive Element Substrate Material Body Terminals Lead (Pb)-free Option Tin Lead Option Passivated nichrome Silicon Molded epoxy Copper alloy 100 % matte tin Sn90 Precent of Rated Power % = 0.40 W Tin Lead and Lead (Pb)-free Finish Plated Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: ORNV UF O R N V U F O R N T V U F GLOBAL MODEL (4 or 5 digits) ORNV (Tin/lead) ORNTV (Lead (Pb)-free) (e3) RESISTANCE (REF.) RESISTANCE PACKAGING The first 3 digits are significant figures and the last digit specifies the number of zeros. Example: 5001 = 5 k R 2 The first 3 digits are significant figures and the last digit specifies the number of zeros. Example: 5001 = 5 k TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 3000 TS = 100 min., 1 mult UF = TUBED Revision: 01-Sep Document Number: 60112

25 OSOP Molded, 25 mil Pitch, Dual-In-Line Thin Film Resistor, Surface Mount Network OSOP Series resistor networks feature a space saving 25 mil lead pitch versus the current 50 mil pitch standard. This allows users to reduce board space more than 50 % over current standards. The OSOP Series feature 10 isolated resistors in a 20 lead style available for immediate delivery in the standard values listed. SCHEMATIC FEATURES 0.068" (1.73 mm) maximum seated height Rugged molded case construction with no internal solder Available JEDEC MO-137 variation AD Available Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL STANDARD RESISTANCE OFFERING ( =) k k 20 k 2 k 50 k 5 k 100 k Consult factory for additional values and schematics STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 20 - Resistance Range 500 to 100 k per resistor - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to 1 % + 25 C Tolerance: Ratio ± % to 0.5 % + 25 C Power Rating: Resistor 100 mw Maximum at + 70 C Power Rating: Package 400 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v (typical) - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 20-Oct Document Number: 60002

26 OSOP DIMENSIONS AND IMPRINTING in inches and millimeters Logo PIN 1 Locator A D H J B Date Code Part Number Marking E F G C I DIMENSION INCHES MILLIMETERS A B C D E ± ± 0.05 F G H ± ± 0.05 I J MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Lead (Pb)-free Option Tin Lead Option Tin Lead and Lead (Pb)-free Finish Passivated nichrome Silicon Molded epoxy Copper alloy 100 % matte tin Sn90 Plated GLOBAL PART NUMBER INFORMATION New Global Part Numbering: OSOPA1002BUF O S O P A B U F O S O P T A A T 1 GLOBAL MODEL (4 or 5 digits) OSOP (Tin Lead) OSOPT (Lead (Pb)-free) (e3) SCHEMATIC A = 10 nominally equal resistors with each resistor isolated from all others and wires directly across RESISTANCE First 3 digits are significant figures and the last digit specifies the number of zeroes to follow. Example: 1002 = 10K 1003 = 100K Historical Part Number example: OSOPA5000B (for reference purposes only) TOLERANCE AND RATIO TOLERANCE Abs. Tol. A = 0.1 % (1) B = 0.1 % C = 0.25 % D = 0.5 % F = 1 % Z = 0.1 % (1) Ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % % PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 2500 TS = 100 min., 1 mult UF = TUBED OSOP A 5000 B SERIES SCHEMATIC RESISTANCE TOLERANCE AND RATIO TOLERANCE s (1) Tolerance available 1K and up (2) Preferred packaging code Revision: 20-Oct Document Number: 60002

27 VTSR, VSSR, VSOR Molded, 25 mil or 50 mil Pitch, Dual-In-Line Thin Film Resistor, Surface Mount Network Actual Size resistor networks are designed to be used in either analog or digital circuits. The use of thin film resistive elements within the network allows you to achieve an infinite number of very low noise and high stability circuits for industrial, medical and scientific instrumentation. Vishay Dale Thin Film resistor networks are packaged in molded plastic packages with sizes that are recognized throughout the world. The rugged packaging offers superior environmental protection and consistent dimensions for ease of placement with automatic SMT equipment. Vishay Dale Thin Film stocks many designs and values for off-the-shelf convenience. With you can depend on quality products delivered on time with service backing the product. SCHEMATICS 01 SCHEMATIC Resistance Range: 10 Ω to 47 kω 03 SCHEMATIC Resistance Range: 10 Ω to 47 kω 05 SCHEMATIC Pin 1 R 2 47 SCHEMATIC Lead #1 Lead #1 Lead #1 R 2 R 2 R 2 R 2 R 2 R 2 R 2 R 2 R 2 R 2 R 2 R 2 R 2 V CC GND R 2 R 3 FEATURES Reduces total assembly costs Compatible with automatic surface mounting equipment UL 94 V-0 flame resistant Thin film tantalum nitride on silicon Choice of package sizes: VTSR (TSSOP) JEDEC MC-153, VSSR (SSOP or QSOP) JEDEC MS-137, VSOR (SOIC narrow) JEDEC MS-012 Moisture sensitivity level 1 (per IPC/JEDEC STD-20C) Isolated/bussed/dual terminator/differential terminator circuits Material categorization: For definitions of compliance please see TYPICAL PERFORMANCE ABSOLUTE TRACKING TC00 NA ABSOLUTE RATIO TOL. 5, 2, 1 NA RESISTORS WITH ONE PIN COMMON The 01 circuit provides nominally equal resistors connected between a common pin and a discrete PC board pin. Commonly used in the following applications: MOS/ROM pull-up/-down Open collector pull-up Wired OR pull-up Power driven pull-up TTL input pull-down Digital pulse squaring TTL unused gate pull-up High speed parallels pull-up Broad selection of standard values available ISOLATED RESISTORS The 03 circuit provides nominally equal resistors isolated from all others and wired directly across. Commonly used in the following applications: Wired OR pull-up Power driven pull-up Powergate pull-up Line termination Long-line impedance balancing LED current limiting ECL output pull-down TTL input pull-down Broad selection of standard values available DUAL-LINE TERMINATOR; PULSE SQUARING The 05 circuit contains pairs of resistors connected between ground and a common line. The junctions of these resistor pairs are connected to the input leads. The 05 circuits are designed for dual-line termination and pulse squaring. Standard values are: VSSR1605: = 220, R 2 = 330 = 330, R 2 = 470 VSSR2005: = 220, R 2 = 330 = 220, R 2 = 1.8 k = 1.5 k, R 2 = 3.3 k DIFFERENTIAL TERMINATOR The 47 schematic consists of series resistor sections connected between V CC and ground. Each contains 3 resistors of 2 different resistance values. Standard values are: VSSR20 and VTSR20: = 270, R 2 = 120 VSSR16 and VTSR16: = 330, R 2 = 150 = 330, R 2 = 220 Revision: 08-Jan Document Number: 60003

28 VTSR, VSSR, VSOR STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Pin/Lead Number 16, 20, 24 - Resistance Range 10 to 47 k Per E-24 table TCR: Absolute ± 100 ppm/ C - 55 C to C TCR: Tracking n/a - Tolerance: Absolute ± 5 % standard (± 2 % available) Per E-24 table ± 1 % standard (check factory) Per E-96 table Tolerance: Ratio NA - Power Rating: Resistor 100 mw max. At + 70 C Power Rating: Package 16 = 1.0 W, 20 = 1.2 W, 24 = 1.4 W 0 C to + 70 C Stability: Absolute - - Stability: Ratio - - Voltage Coefficient 5 ppm/v (typical) - Working Voltage 50 V DC - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 35 db - Thermal EMF - - Shelf Life Stability: Absolute - - Shelf Life Stability: Ratio - - DIMENSIONS AND IMPRINTING in inches (millimeters) B C Part Marking-Model, Pin Count (Optional), Schematic E xxxx Resistance Value Code F H Date Code G Pin #1 A W J D MARKING DIMENSION VTSR-xxxx VSSR-xxxx VSOR-xxxx A - 16 PIN ± (5.23 ± 0.08) ± (4.90 ± 0.010) ± (9.91 ± 0.25) A - 20 PIN ± (6.50 ± 0.08) ± (8.66 ± 0.08) NA A - 24 PIN ± (7.77 ± 0.08) ± (8.66 ± 0.08) NA B (Ref.) (0.65) (0.64) (1.27) C (Ref.) (0.22) (0.25) (0.41) D (0.10) (0.15) (0.20) E (Typ.) (0.61) (0.64) (0.76) F ± (4.39 ± 0.08) ± (3.91 ± 0.08) ± (3.86 ± 0.08) G (0.38) (0.38) (0.38) H ± (6.40 ± 0.13) ± (5.99 ± 0.20) ± (5.99 ± 0.13) J (Ref.) (0.13) (0.25) (0.20) W ± (1.09 ± 0.13) ± (1.63 ± 0.13) ± (1.63 ± 0.13) MODEL PIN COUNT (Optional) SCHEMATIC RESISTANCE RESISTANCE DATE CODE VXXX XX XX XXXX XXX XXXX VSOR VSSR VTSR , 03, 05 or 47 1 % RESISTANCE e.g.: 43R2 4 digits are used to express ohmic values only less than 100. R is used to designate the decimal position OR 1 %, 2 %, 5 % RESISTANCE e.g.: 103 = 10K The first 2 digits are significant figures, the last digit specifies the number of zeros to follow. Revision: 08-Jan Document Number: 60003

29 VTSR, VSSR, VSOR MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Plating Tantalum nitride Silicon Molded epoxy Copper alloy 100 % matte tin Lead Coplanarity " Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 PACKAGING INFORMATION MODEL LEADS TAPE AND REEL TUBES DERATING CURVE VTSR (TSSOP) VSSR (QSOP) VSOR (SOIC) Precent of Rated Power Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTSR JTF V T S J T F V S O G T F GLOBAL MODEL PIN COUNT SCHEMATIC VTSR VSSR VSOR Lead (Pb)-free (e3) date code > (not VSOR) 24 (not VSOR) 16 (not VTSR) 20 (not VSOR) 01 (bussed) 03 (isolated) 05 (terminator) 47 (terminator) RESISTANCE (3, 4 or 6 digits) XXX: 100R and all 1 %, 2 % and 5 % First 2 digits are significant figures. Last digit specifies number of zeros to follow. XXXX: < 100 % First 3 digits are significant figures. Last digit specifies number of zeros to follow. xxx xxx First 2 digits are significant figures. Last digit specifies number of zeros. TOLERANCE F = 1.0 % G = 2.0 % J = 5.0 % G = 2.0 % J = 5.0 % PACKAGING TAPE AND REEL TF = Full reel 2500 UF = Tubed Historical Part Number example: VSSR GT/R (for reference purposes only) VSSR G T/R MODEL PIN COUNT SCHEMATIC RESISTANCE TOLERANCE PACKAGING Revision: 08-Jan Document Number: 60003

30 NOMC Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor, Narrow Body, Surface Mount Network Actual Size The NOMC series features a standard 14 pins and 16 pins narrow body (0.150") small outline surface mount style. It can accommodate resistor networks to your particular application requirements. The networks can be constructed with passivated nichrome (standard), or tantalum nitride (1) resistor films to optimize performance. (1) Available upon request. Resistance value range and performance differs from passivated nichrome standard electrical specifications on datasheet, consult factory. FEATURES Standard 14 pins and 16 pins counts (0.150" narrow body) JEDEC MS-012 Available variation AB and AC Rugged molded case construction Available Excellent long term ratio stability ( R ± %) Low TCR tracking ± 5 ppm/ C Isolated and bussed schematics Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL SCHEMATICS NOMC1401 or NOMCT1401 NOMC1601 or NOMCT1601 The 01 circuit provides a choice of 13 or 15 equal value resistors each connected between a common lead (14 or 16). Custom schematics available. NOMC1403 or NOMCT1403 NOMC1603 or NOMCT1603 The 03 circuit provides a choice of 7 or 8 equal value resistors each connected between a common lead (14 or 16). Custom schematics available. STANDARD RESISTANCE OFFERING (Equal Value Resistors) ISOLATED (03) SCHEMATIC BUSSED (01) SCHEMATIC 1 k 10 k 2 k 20 k 5 k 10 k 20 k 100 k Consult factory for additional values Revision: 08-Jan Document Number: 60007

31 NOMC STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome (standard) Tantalum nitride (available upon request) - Pin/Lead Number 14, 16 - Resistance Range 100 to 50 k each resistor (bussed (01) schematic) to 100 k each resistor (isolated (03) schematic) - TCR: Absolute ± 25 ppm/ C (standard) - 55 C to C TCR: Tracking ± 5 ppm/ C (typical) - 55 C to C Tolerance: Absolute ± 0.10 % to ± 1 % + 25 C Tolerance: Ratio ± % to ± 0.1 % + 25 C Power Rating: Resistor 100 mw ((typical) (03) schematic) 50 mw ((01) schematic) Maximum at + 70 C Power Rating: Package 400 mw/500 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C DIMENSIONS AND IMPRINTING in inches and millimeters Index Area PIN 1 Locator e O H E B C L A 1 h x 45 A DIMENSION INCHES MILLIMETERS INCHES MILLIMETERS H E O A e B C L A h MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Lead (Pb)-free Option Tin Lead Option Tin Lead and Lead (Pb)-free Finish Passivated nichrome Available upon request. Resistance value range and performance differs from passivated nichrome standard electrical specifications on datasheet, consult factory. Silicon Molded epoxy Copper alloy 100 % matte tin Sn90 Plated Revision: 08-Jan Document Number: 60007

32 NOMC ORDERING INFORMATION CHECK LIST (Customs) Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL MECHANICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Reference by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package GLOBAL PART NUMBER INFORMATION New Global Part Numbering: NOMC BUF N O M C B U F N O M C T Z T 1 GLOBAL MODEL (4 or 5 digits) NOMC (Tin Lead) NOMCT (Lead (Pb)-free) (e3) PINS SCHEMATIC RESISTANCE = 13 or 15 bussed equal value resistors 03 = 7 or 8 isolated equal value resistors First 3 digits are significant figures and the last digit specifies the number of zeros to follow. Example: 1002 = 10K 1003 = 100K Historical Part Number example: NOMC Z (for reference purposes only) TOLERANCE AND RATIO TOLERANCE Abs. Tol. A = 0.1 % (1) B = 0.1 % C = 0.25 % D = 0.5 % F = 1 % Z = 0.1 % (1) Ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % % PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 2500 TS = 100 min., 1 mult UF = TUBED NOMC Z SERIES PINS SCHEMATIC RESISTANCE TOLERANCE AND RATIO TOLERANCE s (1) Tolerance available 1K and up (2) Preferred packaging code Revision: 08-Jan Document Number: 60007

33 NOMCA Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor, Precision Automotive, AEC-Q200 Qualified, Networks The NOMCA series features a standard 14 pin or 16 pin narrow body (0.150") small outline SMT package. The network is constructed with tantalum nitride resistor film on high purity alumina substrate for improved ESD and moisture protection. Custom schematics are available consult factory. FEATURES Standard 14 pins and 16 pins counts (0.150" narrow body) JEDEC MS-012 variation AB and AC Rugged molded case construction Excellent long term ratio stability ( R ± %) Low TCR tracking ± 5 ppm/ C AEC-Q200 ESD rated 1 kv (< 10 k ) AEC-Q200 ESD rated 2 kv (>10 k ) Material categorization: For definitions of compliance please see TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL SCHEMATICS The 03 circuit provides a choice of 7 or 8 equal value resistors each connected between a common lead (14 or 16). Custom schematics available. STANDARD RESISTANCE OFFERING (Equal Value Resistors) Consult factory for additional values ISOLATED (03) SCHEMATIC 1 k 2 k 5 k 10 k 20 k 50 k Revision: 30-Mar Document Number: 60117

34 NOMCA STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride (Ta2N) - Pin/Lead Number 14, 16 - Resistance Range 1 k to 50 k each resistor - TCR: Absolute ± 25 ppm/ C (standard) - 55 C to C TCR: Tracking ± 5 ppm/ C (typical) - 55 C to C Tolerance: Absolute ± 0.10 % to ± 1 % + 25 C Tolerance: Ratio ± 0.05 % to ± 0.1 % + 25 C Power Rating: Resistor 100 mw ((typical) (03) schematic) Maximum at + 70 C Power Rating: Package 400 mw/500 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 1000 h at C Stability: Ratio R ± % 1000 h at C Voltage Coefficient < 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C DIMENSIONS AND IMPRINTING in inches and millimeters Index Area PIN 1 Locator e O H E B C L A 1 h x 45 A DIMENSION INCHES MILLIMETERS INCHES MILLIMETERS H E O A e B C L A h MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Lead (Pb)-free Option Tantalum nitride (Ta2N) Ceramic Molded epoxy Copper alloy 100 % matte tin plate or Ni/Pd/Au solder free option Revision: 30-Mar Document Number: 60117

35 NOMCA ORDERING INFORMATION CHECK LIST (Customs) Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL MECHANICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to whichreference resistors 3. Reference by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements) ENVIRONMENTAL TEST CONDITONS LIMITS PER AQEC-Q200 TYPICAL VISHAY PERFORMANCE < 10K TYPICAL VISHAY PERFORMANCE > 10K Resistance Temperature Characteristic - 55 C to C ± 25 ppm/ C 15 ppm/ C 15 ppm/ C Max. Ambient Temperature at Rated Wattage + 70 C + 70 C + 70 C Max. Ambient Temperature at Power Derating C C C High Temperature Exposure R MIL-STD-202, 108, 1000 h at 125 C ± 0.20 % % % Temperature Cycling R JESD22, A104, 1000 cycles, - 55 C to C ± 0.25 % % % Moisture Resistance R MIL-STD-202 method 106 ± 0.20 % % % Biased Humidity R MIL-STD-202, 103, 1000 h at 85 C, 85 % RH, 10 % P ± 0.25 % % % Life R MIL-STD-202, 108, 1000 h at 125 C ± 0.10 % % % Mechanical Shock R MIL-STD-202 method 213, condition C ± 0.25 % % % Vibration R MIL-STD-202 method 204, 10 Hz to 2 khz ± 0.25 % % % Resistance to Soldering Heat R MIL-STD-202, 204, condition B ± 0.10 % % % Electrostatic Discharg R AEC-Q at 1 kv, human body ± 0.50 % % AEC-Q at 2 kv, human body ± 0.50 % % Solderability J-STD-002 method B and B1 95 % Acceptable Acceptable Terminal Strenght R AEC-Q at 1 kg for 60 s Acceptable Acceptable Flame Retardance AEC-Q Para 4.0 Acceptable Acceptable DERATING CURVE Precent of Rated Power % = 400 mw (14p) 500 mw (16p) Ambient Temperature C Revision: 30-Mar Document Number: 60117

36 NOMCA GLOBAL PART NUMBER INFORMATION New Global Part Numbering: NOMCA BUF N O M C A A T 1 GLOBAL MODEL (4 or 5 digits) NOMCA (Lead (Pb)-free) (e3) PINS SCHEMATIC RESISTANCE = 7 or 8 isolated equal value resistors First 3 digits are significant figures and the last digit specifies the number of zeros to follow. Example: 1002 = 10K TOLERANCE AND RATIO TOLERANCE Abs. Tol. A = 0.1 % (1) B = 0.1 % C = 0.25 % D = 0.5 % F = 1 % Ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 2500 TS = 100 min., 1 mult UF = TUBED s (1) Tolerance available 1K and up (2) Preferred packaging code Revision: 30-Mar Document Number: 60117

37 TOMC Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor, Surface Mount Network offers standard circuits in 16 pins in a medium body molded surface mount package. The networks are available over a resistance range of 100 to 100 k. The network features tight ratio tolerances and close TCR tracking. In addition to the standards shown, custom circuits are available upon request. SCHEMATIC PIN 1 Ref. TOMC circuit Actual Size The 01 circuit provides 15 nominally equal resistors, each connected between a common lead (16) and a discrete PC board pin. FEATURES 0.090" (2.29 mm) maximum seated height Rugged, molded case construction (0.22" wide) Available Highly stable thin film ratio stability ( R ± % at 70 C for 2000 h) Available Low temperature coefficient, ± 25 ppm/ C (- 55 C to C) Wide resistance range 100 to 100 k Isolated/bussed circuits Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE PIN 1 ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL Ref. TOMC circuit The 03 circuit provides a choice of 8 nominally equal resistors with each resistor isolated from all others and wired directly across. STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 16 - Resistance Range 100 to 100 k per resistor - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to 1 % + 25 C Tolerance: Ratio ± % to 0.5 % + 25 C Power Rating: Resistor 50 mw = PIN 16 common 100 mw = isolated Maximum at + 70 C Power Rating: Package 750 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 08-Jan Document Number: 60008

38 TOMC DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION INCHES MILLIMETERS Date Code Vishay Symbol Lead #1 Indicator M N 7 D A E Typical TOMC-XX B Centered Maximum, Marking Area C Part Number S 7 G H Centered F Maximum 7 J Marking K L ± Area (1.27) P R Q A B C D E F G H J K L M N P Q R S MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Lead (Pb)-free Option 100 % matte tin Tin Lead Option Sn85 DERATING CURVE Power 0.75 W 0.65 W W W TOMC-1601, TOMC-1603 Single Resistor 0.05 W 0.48 W Tin Lead and Lead (Pb)-free Finish Plated - 50 C - 25 C + 70 C C C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TOMC BUF T O M C B U F T O M C T Z T 1 GLOBAL MODEL (4 or 5 digits) TOMC (Tin lead) TOMCT (Lead (Pb)-free) (e3) PINS SCHEMATIC RESISTANCE = 15 bussed equal resistors 03 = 7 or 8 isolated equal resistors First 3 digits are significant figures and the last digit specifies the number of zeros to follow. Example: 1002 = 10K 1003 = 100K TOLERANCE AND RATIO TOLERANCE Abs. Tol. A = 0.1 % (1) B = 0.1 % C = 0.25 % D = 0.5 % F = 1 % Z = 0.1 % (2) Ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % % PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (3) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 2000 TS = 100 min., 1 mult UF = TUBED Historical Part Number example: TOMC Z (for reference purposes only) TOMC Z SERIES NUMBER OF LEADS SCHEMATIC RESISTANCE s (1) Tolerance available 250 and up (2) Tolerance available 1K and up (3) Preferred packaging code TOLERANCE AND RATIO TOLERANCE Revision: 08-Jan Document Number: 60008

39 VSOR2000S1 Molded, 50 mil Pitch, Dual In-Line Thin Film Resistor, Surface Mount Network V.35 termination network used to insure signal integrity between transmitter and receiver sections of V.35 protocol. SCHEMATIC Actual Size FEATURES Rugged, molded case construction Reduces total assembly costs Saves board space Compatible with surface mounting equipment Uniform performance characteristics Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC definition TYPICAL PERFORMANCE ABSOLUTE TRACKING TC00 10 ABSOLUTE RATIO TOL. 1, s Pad 7 does not exist PIN 7 is an open circuit STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Pin/Lead Number 20 - Resistance Range 50 to TCR: Absolute ± 100 ppm/ C - 55 C to C TCR: Tracking ± 10 ppm/ C - 55 C to C Tolerance: Absolute ± 1 %, ± 2 % ± 1 %: 51.5 and 124 ± 2 %: 50.0 and 125 Tolerance: Ratio 0.5 % - Power Rating: Resistor - - Power Rating: Package 1.6 W - 55 C to C Stability: Absolute - - Stability: Ratio - - Voltage Coefficient - - Working Voltage - - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise - - Thermal EMF - - Shelf Life Stability: Absolute - - Shelf Life Stability: Ratio - - Revision: 20-Oct Document Number: 60009

40 VSOR2000S1 DIMENSIONS AND IMPRINTING in inches and millimeters Part Number Date Code B VSOR20 C PIN 1 A 00S1 D F G W J H E DIMENSION INCHES MILLIMETERS A ± ± 0.25 B (Ref.) C (Ref.) D E (Typ.) F ± ± 0.08 G x x 45 H ± ± 0.13 J (Ref.) W ± ± 0.13 MECHANICAL SPECIFICATIONS Resistive Material Tantalum nitride Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Plating Tin lead solder Lead coplanarity " Marking Resistance to Solvents Lead (Pb)-free Permanency testing per MIL-STD-202, method % matte tin Plated DERATING CURVE Precent of Rated Power Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VSOR2000S1T1 V S O R S 1 T F GLOBAL MODEL VSOR2000S1 PACKAGING TAPE AND REEL TF = Full reel 2500 UF = TUBED Historical Part Number example: VSOR2000S1T/R (for reference purposes only) VSOR 2000S1 T/R MODEL# VALUE PACKAGING Revision: 20-Oct Document Number: 60009

41 WOMC Molded, 50 mil Pitch, Dual In-Line Thin Film Resistor, Wide Body, Surface Mount Network The WOMC series features a standard 16 pins and 20 pins wide body (0.30") small outline surface mount style that can accommodate resistor networks to your particular application requirements. The networks can be constructed with passivated nichrome, or tantalum nitride resistor films to optimize performance. SCHEMATIC Actual Size 20 Pin FEATURES Standard 16 pins and 20 pins counts (0.300" wide body) JEDEC MS-013 variation AA and AC Available Rugged, molded case construction High stable in element ratio stability Available ( R ± % at 70 C for 2000 h) Leads copper alloy, solderable Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL Custom schematics available Please contact factory STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome or tantalum nitride - Pin/Lead Number 16, 20 - Resistance Range 100 to 500 k total resistance - TCR: Absolute ± 25 ppm/ C to ± 50 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C (typical) - 55 C to C Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.05 % to ± 0.1 % + 25 C Power Rating: Resistor 100 mw (per element) Maximum at + 70 C Power Rating: Package 500 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 20-Oct Document Number: 60010

42 WOMC DIMENSIONS AND IMPRINTING in inches and millimeters Index Area Pin 1 Locator e O H E B C L A 1 h x 45 A DIMENSION INCHES MILLIMETERS INCHES MILLIMETERS H E O A e B C L A h MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Lead (Pb)-free Option Tin Lead Option Tin Lead and Lead (Pb)-free Finish Passivated nichrome Silicon Molded epoxy Copper alloy 100 % matte tin Sn90 Plated ORDERING INFORMATION CHECK LIST (Customs) Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL MECHANICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Reference by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package 4. Specify if lead (Pb)-free Revision: 20-Oct Document Number: 60010

43 WOMC GLOBAL PART NUMBER INFORMATION New Global Part Numbering: WOMC1xx-xxxT1 W O M C 1 x x - x x x T 1 W O M C T 1 x x - x x x - x T 1 GLOBAL MODEL (4 or 5 digits) WOMC (Tin Lead) WOMCT (Lead (Pb)-free) (e3) CUSTOM PART NUMBER (7 or 9 digits) 1xx-xxx or 1xx-xxx-x PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 1000 TS = 100 min., 1 mult UF = TUBED Historical Part Number example: 1xx-xxx (for reference purposes only) 1xx-xxx CUSTOM PART NUMBER Revision: 20-Oct Document Number: 60010

44 CSO Sandwich, 50 mil Pitch, Dual In-Line Thin Film Resistor, Surface Mount Network A dual-in-line monolithic ceramic sandwich in a variety of pin sizes (4 to 20) that allow higher resistance integration than traditional chip and wire molded construction. In addition, tighter resistance tolerances can be obtained over traditional molded networks due to the elimination of molding temperature and stress. SCHEMATIC Actual Size FEATURES Lead (Pb)-free gold plated terminals standard Gold-to-gold terminations. External leads are attached directly to gold pads on the ceramic Available substrate by thermo-compression bonding (no internal solder) Available Tighter tolerances than molded standards (0.01 %) Ceramic package with no cavity Flexibility of lead variations to save PC board space Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL Custom schematics available Please consult factory STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride or passivated nichrome (1) - Pin/Lead Number 4 to 20 - Resistance Range 100 to 1.5 M total - TCR: Absolute ± 25 ppm/ C to ± 50 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C (typical) - 55 C to C Tolerance: Absolute ± 0.05 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.02 % to ± 0.1 % + 25 C Power Rating: Resistor 100 mw Per element at + 70 C Power Rating: Package 500 mw Maximum at + 70 C Stability: Absolute R ± 0.1 % 2000 h at + 70 C Stability: Ratio R ± 0.03 % 2000 h at + 70 C Voltage Coefficient 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C (1) Passivated nichrome is not standard film type for CSO series, consult factory if required Revision: 20-Oct Document Number: 60011

45 CSO DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION INCHES MILLIMETERS A B (Typ.) L C A B C D (Max.) E F (Min.) G (Typ.) D E H (Max.) L (6 Pins) ± F L (8 Pins) ± G L (10 Pins) ± L (12 Pins) ± H L (14 Pins) ± L (16 Pins) ± L (18 Pins) ± L (20 Pins) ± MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome or tantalum nitride Body Ceramic Lead Coplanarity ± Substrate Material Alumina Marking Resistance to Solvents Per MIL-PRF Terminals Copper alloy Plating Nickel/gold Model CSOG - Lead (Pb)-free Standard Gold plated Model CSO - Tin/Lead Solder Coated Option Sn63 Model CSOT - Lead (Pb)-free Solder Coated Option 96.5 % Sn, 3.0 % Ag, 0.5 % Cu ORDERING INFORMATION CHECK LIST Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL MECHANICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Reference by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package 4. Specify if solder coated leads are required Revision: 20-Oct Document Number: 60011

46 CSO GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CSOG1xx-xxxT1 C S O G 1 x x - x x x T 1 C S O 1 x x - x x x T 1 C S O T 1 x x - x x x - x T 1 GLOBAL MODEL (3 or 4 digits) CSOG (Lead (Pb)-free) (e4) CSO (Tin Lead) CSOT (Lead (Pb)-free) (e1) CUSTOM PART NUMBER (7 or 9 digits) 1xx-xxx 1xx-xxx-x PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult UF = TUBED Historical Part Number example: 1xx-xxx (for reference purposes only) 1xx-xxx CUSTOM PART NUMBER Revision: 20-Oct Document Number: 60011

47 CSOM Sandwich, 25 mil Pitch, Dual In-Line Thin Film Resistor, Surface Mount Network A dual-in-line monolithic ceramic sandwich in a variety of pin sizes (14 to 24) that allow higher resistance integration than traditional chip and wire molded construction. In addition, tighter resistance tolerances can be obtained over traditional molded networks due to the elimination of molding temperature and stress. SCHEMATIC FEATURES Lead (Pb)-free gold plated terminals standard Gold-to-gold terminations. External leads are attached directly to gold pads on the ceramic Available substrate by thermo-compression bonding (no Available internal solder) Tighter tolerances than molded standards (0.01 %) Ceramic package with no cavity Flexibility of lead variations to save PC board space Material categorization: For definitions of compliance please see * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL Custom schematics available Please consult factory STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride or passivated nichrome (1) - Pin/Lead Number 14 to 24 - Resistance Range 100 to 500 k total - TCR: Absolute ± 25 ppm/ C to ± 50 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C (typical) - 55 C to C Tolerance: Absolute ± 0.05 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.02 % to ± 0.1 % + 25 C Power Rating: Resistor 100 mw Per element at + 70 C Power Rating: Package 500 mw Maximum at + 70 C Stability: Absolute R ± 0.1 % 2000 h at + 70 C Stability: Ratio R ± 0.03 % 2000 h at + 70 C Voltage Coefficient 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C (1) Passivated nichrome is not standard film type for CSOM series, consult factory if required Revision: 05-Sep Document Number: 60121

48 CSOM DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION INCHES MILLIMETERS A B (Typ.) L C C A B D (Max.) E F (Min.) D E G (Typ.) H (Max.) F L (14 Pins) ± G L (16 Pins) ± H L (18 Pins) ± L (20 Pins) ± L (22 Pins) ± L (24 Pins) ± MECHANICAL SPECIFICATIONS Resistive Element Tantalum nitride or passivated nichrome Body Ceramic Lead Coplanarity ± Substrate Material Alumina Marking Resistance to Solvents Per MIL-PRF Terminals Copper alloy Plating Nickel/gold Model CSOMG - Lead (Pb)-free Standard Gold plated Model CSOM - Tin/Lead Solder Coated Option Sn63 Model CSOMT - Lead (Pb)-free Solder Coated Option 96.5 % Sn, 3.0 % Ag, 0.5 % Cu ORDERING INFORMATION CHECK LIST Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL MECHANICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Reference by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package 4. Specify if solder coated leads are required Revision: 05-Sep Document Number: 60121

49 CSOM GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CSOMG1xx-xxxT1 C S O M G 1 x x - x x x T 1 C S O M 1 x x - x x x T 1 C S O M T 1 x x - x x x - x T 1 GLOBAL MODEL (4 or 5 digits) CSOMG (Lead (Pb)-free) (e4) CSOM (Tin lead) CSOMT (Lead (Pb)-free) (e1) CUSTOM PART NUMBER (7 or 9 digits) 1xx-xxx 1xx-xxx-x PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult UF = TUBED Revision: 05-Sep Document Number: 60121

50 LCC, TLCC Hermetic, 50 mil Pitch, Leadless Thin Film Chip Resistor, Surface Mount Network Actual Size offers a wide resistance range in 16, 20, and 24 terminal hermetic leadless chip carriers. The standard circuits in the ohmic ranges listed below will utilize the outstanding wraparound terminations developed for chip resistors. Should one of the standards not fit your application, consult the applications engineering group as we may be able to meet your requirements. SCHEMATIC TLCC 16 A kω to 100 kω TLCC 16 A Ω to 100 kω TLCC 16 A Ω to 100 kω TLCC 20 A01 10 kω to 200 kω TLCC 20 A03 10 Ω to 120 kω TLCC 20 A06 1 kω to 110 kω FEATURES High purity alumina substrate for high power dissipation Leach resistant terminations with nickel barrier Available 16, 20, 24 terminal gold plated wraparound true hermetic packaging Available Military/aerospace Hermetically sealed Isolated/bussed circuits Ideal for military/aerospace applications Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL. 0.1 NA Resistance range: d on schematics TLCC 24 A01 1 kω to 100 kω TLCC 24 A03 1 kω to 100 kω TLCC 24 A06 1 kω to 100 kω LCC 20A (10 Isolated Resistors) (19 Resistors + 1 Common Point) Ω to 250 kω LCC 20B 10 Ω to 200 kω Revision: 20-Oct Document Number: 60012

51 LCC, TLCC STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 16, 20, 24 - Resistance Range 10 to 250 k per resistor - TCR: Absolute ± 25 ppm/ C to ± 300 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 C Tolerance: Ratio N/a - Power Rating: Resistor 50 mw max. = common circuits 100 mw max. = isolated circuits Maximum at + 70 C Power Rating: Package 500 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio - - Voltage Coefficient < 5 ppm/v (typical) - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio - - Tantalum nitride film is custom, consult factory DIMENSIONS in inches and millimeters B D max. G typ. C Terminal " (0.203) R Typ. Terminal 1 Indicator A typ. E Typ. F H Index Corner DIMENSION 16 PINS 20 PINS 24 PINS INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS A B C D E F G H Revision: 20-Oct Document Number: 60012

52 LCC, TLCC MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Marking Resistance to Solvents Tin Lead Option Lead (Pb)-free Option Tin Lead and Lead (Pb)-free Passivated nichrome Alumina Ceramic Gold over nickel Per MIL-PRF Sn % Sn, 3.0 % Ag, 0.5 % Cu Hot solder dip GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TLCC20AE1002BUF T L C C 2 0 A E B U F T L C C T 1 6 A 0 1 K K U F GLOBAL MODEL (4 or 5 digits) LCC (Tin lead) LCCT (Lead (Pb)-free) (e1) TLCC (Tin lead) TLCCT (Lead (Pb)-free) (e1) TERMINAL COUNT (1) SCHEMATICS (4 or 5 digits) A = Isolated resistors B = Resistor to common bus A01 = Resistor to common bus A03 = Isolated parallel resistor A06 = Isolated adjacent resistor TCR CHARACTERISTICS E = 25 ppm/ C H = 50 ppm/ C K = 100 ppm/ C M = 300 ppm/ C Historical Part Number example: LC20BK1003J (for reference purposes only) RESISTANCE TOLERANCE PACKAGING First 3 digits are significant figures and the last digit specifies the number of zeros to follow. Example: 10R0 = 10 12R5 = = = 1000 B = 0.1 % D = 0.5 % F = 1 % G = 2 % J = 5 % K = 10 % S = Special TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 2000 TS = 100 min., 1 mult UF = TUBED LC 20 B K 1003 J SERIES PINS SCHEMATIC TCR CHARACTERISTIC RESISTANCE TOLERANCE (1) LCC or LCCT only available in 20 pin size Revision: 20-Oct Document Number: 60012

53 MPH Hermetic, 50 mil Pitch, Leadless Thin Film Chip Resistor, Surface Mount Network Actual Size Vishay Dale Thin film offers a four terminal hermetic leadless chip carrier package with precision matched pair elements. The network features tight ratio tolerance and close tracking over a 100 to 100 k resistance range. For custom schematics and values contact applications engineering. FEATURES True hermetic construction Exceptional stability and performance Available characteristics ratio stability ( R ± % at 70 C for 2000 h) Available Nickel barrier terminations Military/aerospace Hermetically sealed Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL SCHEMATIC 4 2 R 2 1 R 2 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 4 - Resistance Range 100 to 100 k - TCR: Absolute ± 25 ppm/ C (standard) - 55 C to C TCR: Tracking ± 2 ppm/ C (typical < 1 ppm / C equal values) - 55 C to C Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.05 % to ± 0.1 % + 25 C Power Rating: Resistor 250 mw (per element) Maximum at + 70 C Power Rating: Package 1000 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 20-Oct Document Number: 60013

54 MPH DIMENSIONS in inches and millimeters C B 1 2 D A 4 3 E F BOTTOM VIEW G DIMENSION INCHES MILLIMETERS A B C D (typical) E F G MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Marking Resistance to Solvents Tin Lead Option Lead (Pb)-free Option Tin Lead and Lead (Pb)-free Passivated nichrome Alumina Ceramic Gold over nickel Per MIL-PRF Sn % Sn, 3.0 % Ag, 0.5 % Cu Hot solder dip GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MPHK1003BUF M P H K B U F M P H T K A U F GLOBAL MODEL (3 or 4 digits) MPH (Tin lead) MPHT (Lead (Pb)-free) (e1) TCR CHARACTERISTIC E = 25 ppm/ C H = 50 ppm/ C K = 100 ppm/ C RESISTANCE First 3 digits are significant figures and the last digit specifies the number of zeros to follow. Example: 1001 = 1K 1002 = 10K Historical Part Number example: MPHE1001B (for reference purposes only) TOLERANCE AND RATIO TOLERANCE Abs. Tol. A = 0.1 % B = 0.1 % C = 0.25 % D = 0.5 % F = 1 % Ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 2500 TS = 100 min., 1 mult UF = TUBED MPH E 1001 B SERIES TCR CHARACTERISTIC RESISTANCE TOLERANCE AND RATIO TOLERANCE Revision: 20-Oct Document Number: 60013

55 High Precision Thin Film Network, Surface Mount Leadless Resistor Arrays PR100, PR135, PR182 Product may not be to scale PR arrays can be used in most applications requiring a matched pair (or set) of resistor elements. The networks provide 2 ppm/ C TCR tracking, a ratio tolerance as tight as 0.02 % and outstanding stability. They are available in 1 mm, 1.35 mm and 1.82 mm pitch. FEATURES Gold terminations over nickel barrier High stability passivated nichrome resistive layer Tight TCR (10 ppm/ C) and TCR tracking (to 2 ppm/ C) Very low noise and voltage coefficient < - 30 db, 0.1 ppm/v typical Ratio tolerance to 0.02 % Material categorization: For definitions of compliance please see SCHEMATIC Schematic A: Independent Resistors Electrical Diagram R 2 R 7 R 8 Number of Resistors: 2 to 8 = R 2 =... R 8 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number to 200 k (PR100) Resistance Range 100 to 300 k (PR135) 100 to 1 M (PR182) - TCR: Absolute ± 10 ppm/ C - 55 C to C TCR: Tracking ± 2 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 10 % - Tolerance: Ratio ± 0.02 % to ± 0.1 % mw (PR100) Power Rating: Resistor 125 mw (PR135) 200 mw (PR182) At + 70 C Power Rating: Package - - Stability: Absolute - - Stability: Ratio - - Voltage Coefficient 0.1 ppm/v - 35 V (PR100) Working Voltage 75 V (PR135) 100 V (PR182) - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise - 30 db - Thermal EMF - - Shelf Life Stability: Absolute - - Shelf Life Stability: Ratio - - Revision: 29-Aug Document Number: 53039

56 PR100, PR135, PR182 DIMENSIONS in mils E DIMENSION PR100 PR135 PR182 A 64 ± 6 72 ± ± 6 B A C D B E (1) E = (N x F) ± 8 E = (N x F) ± 8 E = (N x F) ± 8 C D F G F G s ± 2 mils unless specified (1) Where N = Number of resistors MECHANICAL SPECIFICATIONS Substrate Alumina 99.6 % Technology Film Terminations Thin Film Passivated nichrome Solderable gold (Au) over nickel DERATING CURVE Precent of Rated Power Ambient Temperature C PACKAGING Waffle-pack or tape and reel MARKING On the primary package, printed information includes Vishay trademark series and model, schematic number of resistors, ohmic value, absolute tolerance, ratio tolerance, type of termination Revision: 29-Aug Document Number: 53039

57 PR100, PR135, PR182 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PR100A41002BBGTS P 0 0 A B B G T S GLOBAL MODEL PR100 PR135 PR182 SCHEMATICS A = Isolated resistors NUMBER OF RESISTORS RESISTANCE First 3 digits are significant figures and the last digit specifies the number of zeros to follow. Example: 10R0 = 10 12R5 = = = 1000 ABSOLUTE TOLERANCE B = 0.1 % C = 0.25 % D = 0.5 % F = 1 % G = 2 % J = 5 % K = 10 % RATIO TOLERANCE Q = 0.01 % (1) P = 0.02 % (2) W = 0.05 % (3) B = 0.1 % C = 0.25 % D = 0.5 % F = 1 % Historical Part Number example: PR100A41002BBGT (for reference purposes only) TERMINATION G = Wraparound Au over Ni termination e4 lead (Pb)-free RoHS compliant PACKAGING TAPE AND REEL (4) T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult TI = 100 min., 1 mult (5) TP = 100 min., 1 mult (6) WAFFLE WS =100 min., 1 mult WS =100 min., 1 mult (5) WS =100 min., 1 mult (6) PR100 A B B G T SERIES SCHEMATIC NUMBER RESISTANCE ABSOLUTE TOLERANCE RATIO TOLERANCE TERMINATION PACKAGING s (1) 10 k, up to 4 resistors (2) > 1 k, max. 4 resistors (3) > 100, up to 8 resistors (4) Please refer to below table for tape and reel availability (5) Item single lot date code (6) Package unit single lot date code TAPE AND REEL AVAILABILITY NUMBER OF RESISTORS PR100 PR135 PR182 2 Available Available Available 3 Available 4 Available Available Available 5 Available Available 6 Available Available 7 Available 8 Available Not available, consult factory Revision: 29-Aug Document Number: 53039

58 FP200, FP201, FP202 Hermetic Flat Pack Thin Film Resistor, Surface Mount Network Product may not be to scale offers a broad line of precision resistor networks in hermetic Flat-Packs for surface mount requirements in military, space or other harsh environmental applications. These networks provide the long-term stability necessary to insure continuous specification and performance over the 20 years to 30 years life required for SCHEMATICS 1 FEATURES Military/aerospace Hermetically sealed Available Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC Available definition * Pb containing terminations are not RoHS compliant, exemptions may apply space applications. The fabrication of these devices is performed under tight procedural and environmental controls to insure conformance to all 883C level H or K requirements. Custom configurations, values and tolerance combinations are available with fast turnaround. FP200 Number of Resistors 7, 8 Number of Leads 14, 16 Type Connection Isolated Values Available 500 to 100 k FP201 Number of Resistors 12, 14 Number of Leads 14, 16 Type Connection Series Values Available 500 to 100 k 1 FP202 Number of Resistors 13, 15 Number of Leads 14, 16 Type Connection Common Values Available 500 to 100 k 1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 14, 16 - Resistance Range 10 to 1 M (total) - TCR: Absolute ± 10 ppm/ C to 50 ppm/ C - TCR: Tracking ± 5 ppm/ C (standard) - Tolerance: Absolute ± 0.05 % to ± 1 % - Tolerance: Ratio ± 0.01 % to ± 0.1 % - Power Rating: Resistor 100 mw - Power Rating: Package 800 mw 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient - - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise - - Thermal EMF - - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 20-Oct Document Number: 61073

59 FP200, FP201, FP202 DIMENSIONS in inches (millimeters) FLAT-PAK FP200 D E E 1 b e S k S 1 C A Q DIMENSION 14 LEAD 16 LEAD MINIMUM MAXIMUM MINIMUM MAXIMUM A (2.18) (2.69) (1.14) (2.92) b (0.38) (0.48) (0.38) (0.48) C (0.10) (0.18) (0.08) (0.23) D (9.47) (9.73) (11.18) e (1.19) (1.35) (1.27) BSC E (6.35) (6.60) (6.22) (7.24) E (7.37) (8.00) E (4.01) (4.37) (3.30) - E (0.76) (0.76) - L (6.35) (9.40) Q (0.66) (0.66) (1.14) S (1.14) (1.14) S (0.13) (0.13) - k (0.20) (0.38) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: FP BFBCW F P B F B C W F P B F B C W GLOBAL MODEL FP200 FP201 FP202 CASE SIZE NUMBER OF RESISTORS (1 or 2 digits) OHMIC VALUE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. Example: 10R0 = = = 1000 ABSOLUTE TOLERANCE A = 0.05 % B = 0.1 % C = 0.2 % D = 0.5 % F = 1 % G = 2 % J = 5 % K = 10 % M = 20 % RATIO TOLERANCE B = 0.01 % C = % D = 0.05 % F = 0.1 % H = 0.25 % J = 0.5 % K = 1 % X = Not applicable Historical Part Number example: FP BFBC (for reference purposes only) ABSOLUTE TCR A = 10 ppm/ C B = 25 ppm/ C D = 50 ppm/ C E = 100 ppm/ C RATIO TCR C = 2 ppm (1) D = 3 ppm (1) F = 5 ppm G = 10 ppm X = N/A PACKAGING W = WAFFLE 100 min., 1 mult FP B F B C MODEL NUMBER OF LEADS NUMBER OF RESISTORS RESISTANCE ABSOLUTE TOLERANCE RATIO TOLERANCE ABSOLUTE TCR RATIO TCR (1) Value dependent Revision: 20-Oct Document Number: 61073

60 DFN Dual Flat No Lead Molded Precision Thin Film Resistor Surface Mount Network The DFN series of precision surface mount resistor networks feature isolated thin film precision resistors mounted in a 0.8 mm pitch 4 mm x 4 mm dual flat no lead package. The networks feature 50 % savings in board space over traditional SOIC packages. They are ideally suited for applications of unity gain operational amplifiers that require close TC tracking and tight ratio tolerances over temperature. Custom configurations are available upon request. FEATURES 0.8 mm lead pitch MSL level 1 per J-STD-020 Low profile 1 mm seated height Small size 4 mm x 4 mm size 50 % board savings over SOIC packages Wide resistance range 100 to 100 k available Custom configurations available Low TCR ± 25 ppm, TCR tracking to ± 3 ppm Ratio tolerances to ± % Compliant to RoHS Directive 2002/95/EC TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 3 ABSOLUTE RATIO TOL SCHEMATIC STANDARD RESISTANCE OFFERING ( =) k 1 k 20 k 2 k 50 k 4.99 k 100 k 5 k Consult factory for additional R values and schematics STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 8 - Resistance Range 100 to 100 k per resistor - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 3 ppm/ C - 55 C to C Tolerance: Absolute ± 0.05 % to ± 1.0 % + 25 C Tolerance: Ratio ± % to ± 0.5 % + 25 C Power Rating: Resistor 100 mw Maximum at + 70 C Power Rating: Package 100 mw x number of resistors Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF < 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 02-Sep Document Number: 60109

61 DFN DIMENSIONS AND IMPRINTING in millimeters ± Resistance Value Code ± ± Exposed Pad BSC ± DFNA XXXX MMYY ± Exposed Pad Pin 1 Dot by Marking 1 4 (4 mm x 4 mm) TOP VIEW Date Code (MMYY) ± Ref. 1 BOTTOM VIEW Pin 1 Indentification Chamfer x 45 A Max. Nom. Min A SIDE VIEW Ref. Contact factory for package outlines for higher pin count or custom configurations MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Plating Marking Resistance to Solvents Passivated nichrome Silicon Molded epoxy Copper alloy 100 % matte tin Per MIL-PRF-914 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: DFNA1002AT1 D F N A A T 1 GLOBAL MODEL DFN (Lead (Pb)-free) (e3) SCHEMATIC A = Isolated equal value resistors RESISTANCE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. Example: 1002 = 10 k 1003 = 100 k 4991 = 4.99 k TOLERANCE AND RATIO TOLERANCE Z = ± 0.05 % abs. ± ratio (1) A = ± 0.1 % abs. ± 0.05 % ratio B = ± 0.1 % abs. ± 0.1 % ratio C = ± 0.25 % abs. ± 0.1 % ratio D = ± 0.5 % abs. ± 0.1 % ratio F = ± 1.0 % abs. ± 0.5 % ratio PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult UF = TUBED s (1) Tolerance available on 1 k and up (2) Preferred packaging code Revision: 02-Sep Document Number: 60109

62 DFN (Divider) Dual Flat No Lead Molded Precision Thin Film Divider, Surface Mount Resistor Network The DFN series of thin film precision dividers surface mount resistor networks offer a wide ratio range that is listed in the standard resistance offering table. The 4 mm x 4 mm 0.8 mm pitch dual flat no lead package feature 50 % savings in board space over traditional SOIC packages. The DFN dividers are ideal for applications that require tight TC tracking and ratio tolerances over temperature. FEATURES 0.8 mm lead pitch MSL level 1 per J-STD-020 Low profile 1 mm seated height Small size 4 mm x 4 mm size 50 % board savings over SOIC packages Low TCR ± 25 ppm, TCR tracking to ± 5 ppm Compliant to RoHS Directive 2002/95/EC TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL SCHEMATIC R 2 R STANDARD RESISTANCE OFFERING ( /R 2 ) RATIO R 2 100:1 100K 1K 50:1 50K 1K 25:1 25K 1K 20:1 20K 1K 10:1 10K 1K 5:1 10K 2K 2:1 10K 5K STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 8 - Resistance Range 1000 to 100 k per element - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % + 25 C Tolerance: Ratio ± 0.05 % + 25 C Power Rating: Resistor 100 mw Maximum at + 70 C Power Rating: Package 100 mw x number of resistors Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF < 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 01-Sep Document Number: 60110

63 DFN (Divider) DIMENSIONS AND IMPRINTING in millimeters ± (1) Part Number to be 4 Characters ± ± Exposed Pad BSC ± DFNA xxxx MMYY ± Exposed Pad Pin 1 Dot by Marking 1 4 (4 mm x 4 mm) TOP VIEW Date Code (MMYY) ± Ref. 1 BOTTOM VIEW Pin 1 Indentification Chamfer x 45 A Max. Nom. Min A SIDE VIEW Ref. s (1) resistance ratio part marking to be 100- (2) Contact factory for package outlines for higher pin count or custom configurations MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Plating Marking Resistance to Solvents Passivated nichrome Silicon Molded epoxy Copper alloy 100 % matte tin Per MIL-PRF-914 GLOBAL PART NUMBER INFORMATION D F N A 5-1 U F GLOBAL MODEL (4 digits) DFNA (Lead (Pb)-free) (e3) RESISTANCE (3, 4 or 5 digits) PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (3) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 3000 TS = 100 min., 1 mult UF = TUBED (3) Preferred packaging code Revision: 01-Sep Document Number: 60110

64 QFNwww.vishay.com Quad Flat No Lead Molded Precision Thin Film Resistor, Surface Mount Network FEATURES 0.65 mm lead pitch MSL level 1 per J-STD-020 Low profile 1 mm seated height Small size 5 mm x 5 mm Low TCR ± 25 ppm, TCR tracking to ± 5 ppm Compliant to RoHS Directive 2002/95/EC The QFN- series features a standard 20 pins quad flat no lead 5 mm x 5 mm 0.65 mm pitch package. The quad flat no lead package saves board space over traditional SOIC packages. Additional pin counts available, consult factory. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL SCHEMATIC Custom schematics available Please consult factory STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 20 - Resistance Range 100 (resistor) to 500 k (total) - TCR: Absolute ± 25 ppm/ C to ± 100 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C (typical) - 55 C to C Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.05 % to ± 0.1 % + 25 C Power Rating: Resistor 100 mw (per element) Maximum at + 70 C Power Rating: Package 500 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient 0.1 ppm/v - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 02-Sep Document Number: 60015

65 QFNwww.vishay.com DIMENSIONS AND IMPRINTING in millimeters Pin 1 Dot by Marking ± ± Exp. DAP Pin 1 Identification Chamfer x ± XXX-XXX MMYY ± BSC ± ± Exp. DAP TOP VIEW Ref. BOTTOM VIEW A Max. Nom. Min A SIDE VIEW Ref. Contact factory for package outlines for higher pin count or custom configurations MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Plating Marking Resistance to Solvents Passivated nichrome Silicon Molded epoxy Copper alloy 100 % matte tin Per MIL-PRF-914 ORDERING INFORMATION CHECK LIST (Customs) Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL MECHANICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Reference by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package Revision: 02-Sep Document Number: 60015

66 GLOBAL PART NUMBER INFORMATION Q F N - 1 x x - x x x T 1 QFNwww.vishay.com GLOBAL MODEL (4 digits) QFN- (Lead (Pb)-free) (e3) CUSTOM PART NUMBER (7 or 9 digits) 1xx-xxx or 1xx-xxx-x PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult UF = TUBED Revision: 02-Sep Document Number: 60015

67 HTRN Molded, 50 mil Pitch, High Temperature (215 C); Thin Film Surface Mount, Dual-In-Line Resistor Network HTRN series resistor networks feature four isolated resistors with standard 50 mil pitch lead spacing. HTRN is ideal to be used in oil/gas exploration industry, automotive under the hood applications, and aerospace engine control high temperature applications. The networks feature close TCR tracking and tight ratio tolerance and are ideally suited for unity gain operational amplifier circuitry. The standard resistance offering listed are available for immediate delivery. FEATURES Ratio tolerance to ± 0.05 % Ratio stability ± 0.1 % - 55 C to 215 C operating temperature range 0.068" (1.73 mm) maximum seated height Rugged molded case construction with no internal solder Low temperature coefficient (± 25 ppm/ C) JEDEC MS-012 STD variation AA package Gold terminations for durable attach bonds Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC definition TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL Available STANDARD RESISTANCE OFFERING ( /R 2 ) SCHEMATIC R 2 R RATIO R 2 100:1 100K 1K 50:1 50K 1K 25:1 25K 1K 20:1 20K 1K 10:1 10K 1K 5:1 10K 2K 2:1 10K 5K 4:1 4K 1K Consult factory for additional values and schematics STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 8 - Resistance Range 1000 to 100 k per resistor - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C - 55 C to C Tolerance: Absolute 0.1 % + 25 C Tolerance: Ratio 0.05 % + 25 C Power Rating: Resistor 100 mw Maximum at + 70 C Power Rating: Package 400 mw Maximum at + 70 C Stability: Absolute R ± 0.5 % 2000 h at C at 25 % rated power Stability: Ratio R ± 0.1 % 2000 h at C at 25 % rated power Voltage Coefficient 0.1 ppm/v (typical) - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 12-Dec Document Number: 60111

68 HTRN DIMENSIONS AND IMPRINTING in inches and millimeters A B D C HTRN x x x x I Resistance Value Code Date Code Seating Plane Marking - Vishay symbol, part number from ordering information H ø E F G DIMENSION INCHES MILLIMETERS A B ± ± 0.06 C D max E ± ± 0.03 F ± ± 0.02 G ± ± 0.13 H max I ± ± 0.06 Ø 2 to 6 2 to 6 MECHANICAL SPECIFICATIONS DERATING CURVE Resistive Element Substrate Material Body Terminals Termination Finish Passivated nichrome Silicon Molded epoxy Copper Plated Ni/Pd/Au Percent of Rated Power % = 0.40 W Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: HTRN5-1UF H T R N 5-1 U F GLOBAL MODEL (4 digits) RESISTANCE (3, 4 or 5 digits) HTRN PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 3000 TS = 100 min., 1 mult UF = TUBED Revision: 12-Dec Document Number: 60111

69 Contents E/H (Military M/D55342) E/H (T-Level) (Military M/D55342) Surface Mount Chips E/H (Ta2N) (Military M/D55342) D.S.C.C. Specifications P-NS PTN L-NS M FC PNM PLT PLTT PAT PATT PHP Tape and Reel Specifications 107 Waffle Pack Packaging

70 QPL MIL-PRF Qualified Thin Film Resistor, Surface Mount Chip E/H (Military M/D55342) Thin Film Mil chip resistors feature all sputtered wraparound termination for excellent adhesion and dimensional uniformity. They are ideal in applications requiring stringent performance requirements. Established reliability is assured through 100 % screening and extensive environmental lot testing. CONSTRUCTION Passivation Resistor Film Solder Coating Nickel Barrier High Purity Alumina Substrate Adhesion Layer FEATURES Established reliability, S failure rate level (10 ppm), C = 2 High purity alumina substrate 99.6 % purity Wraparound termination featuring a tenacious adhesion layer covered with an electroplated nickel barrier layer for C operating conditions Very low noise and voltage coefficient (< - 25 db, 0.5 ppm/v) Non-inductive Laser-trimmed tolerances ± 0.1 % Wraparound resistance less than typical In-lot tracking less than 5 ppm/ C Complete MIL-testing available in-house Antistatic waffle pack or tape and reel packaging available Military/aerospace/QPL TYPICAL PERFORMANCE ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tamelox resistor film (passivated nichrome) - Resistance Range 10 to 6.19 M - TCR: Absolute ± 25 ppm/ C to ± 300 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 10 % + 25 C Stability: Absolute R ± 0.02 % 2000 h at + 70 C Stability: Ratio - - Voltage Coefficient 0.1 ppm/v - Working Voltage 30 V to 200 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 25 db - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C COMPONENT RATINGS CASE SIZE POWER RATING (mw) WORKING VOLTAGE (V) RESISTANCE RANGE ( ) BY CHARACTERISTICS TOLERANCE E (0.1 %, 0.25 %, 0.5 %) E (1 %, 2 %, 5 %) H, K, L, M (0.1 %, 0.25 %, 0.5 %) H, K, L, M (1 %, 2 %, 5 %) M55342/ to 150K 49.9 to 150K 20 to 150K 20 to 150K M55342/ to 301K 49.9 to 301K 20 to 301K 20 to 301K M55342/ to 649K 49.9 to 649K 10 to 649K 10 to 649K M55342/ to 1.69M 49.9 to 1.69M 10 to 1.69M 10 to 1.69M M55342/ to 3.16M 49.9 to 3.16M 10 to 3.16M 10 to 3.16M M55342/ to 475K 49.9 to 475K 10 to 475K 10 to 475K D55342/ to 1.5M 49.9 to 1.5M 10 to 1.5M 10 to 1.5M M55342/ to 4.02M 49.9 to 4.02M 10 to 4.02M 10 to 4.02M M55342/ to 6.19M 49.9 to 6.19M 10 to 6.19M 10 to 6.19M M55342/ to 1M 49.9 to 1M 49.9 to 1M 49.9 to 1M M55342/ to 100K 49.9 to 100K 20 to 100K 20 to 100K M55342/ to 258K 49.9 to 261K 10 to 258K 10 to 261K Values listed are a guide, refer to MIL spec for value/tolerance allowance Revision: 13-Mar Document Number: 60018

71 E/H (Military M/D55342) DIMENSIONS in inches D T L E W CASE SIZE TERM. L W T D E M55342/01 B ± ± to ± ± M55342/02 B ± ± to ± ± M55342/03 B ± ± to ± ± M55342/04 B ± ± to ± ± M55342/05 B ± ± to ± ± M55342/06 B ± ± to ± ± D55342/07 B ± ± to / / M55342/08 B / ± to ± ± M55342/09 B / ± to ± ± M55342/10 B ± ± to ± ± M55342/11 B ± ± to ± ± M55342/12 B ± ± to ± ± ENVIRONMENTAL TESTS ENVIRONMENTAL TEST MIL-PRF LIMITS ( R ±) VISHAY PERFORMANCE ( R ±) Thermal Shock 0.1 % % Low Temperature Operation 0.1 % % Short Time Overload 0.1 % % High Temperature Exposure 0.1 % % Resistance to Bonding 0.2 % % Moisture Resistance 0.2 % % TCR ± 25 ppm/ C < 15 ppm/ C Life (2000 h at + 70 C) 0.5 % 0.02 % Life ( h at + 70 C) 2.0 % 0.04 % MECHANICAL SPECIFICATIONS Resistive Element Tamelox Substrate Material Alumina Chip Terminations Solder over nickel Fused Solder Plated solder 90/10 FSCM CAGE # Revision: 13-Mar Document Number: 60018

72 E/H (Military M/D55342) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M55342E06B1C00RTS M E 0 6 B 1 C 0 0 R T S V GLOBAL MODEL M55342 or D55342 (/07 size only) TCR CHARACTERISTIC E = 25 ppm/ C H = 50 ppm/ C K = 100 ppm/ C L = 200 ppm/ C M = 300 ppm/ C CASE SIZE 01 = = = = = = = = = = = = 0603 TERMINATION B = Solderable OHMIC VALUE Three digits and a letter. Letter identifies tolerance, acts as multiplier and decimal locator. MULTIPLIER Tolerance 1 1 k 1 M 0.1 % A B C 0.25 % R U V 0.5 % W Y Z 1 % D E F 2 % G H T 5 % J K L 10 % M N P FAILURE RATE M = 1.0 % per 1000 h P = 0.1 % per 1000 h R = 0.01 % per 1000 h S = % per 1000 h C = Non ER version PACKAGING Standard Packaging: BS =BULK 100 min., 1 mult WS =WAFFLE 100 min., 1 mult W0 =WAFFLE 100 min.,100 mult TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel ( 2K, 4K, or 5K dependent on case size ) per tape and reel document TS = 100 min., 1 mult Special Packaging: WAFFLE WI = 100 min., 1 mult (item single lot date code) WP =100 min., 1 mult (package unit single lot date code) TAPE AND REEL TI = 100 min., 1 mult (item single lot date code) TP = 100 min., 1 mult (package unit single lot date code) Historical Part Number example: M55342K06B5E60R (for reference purposes only) M55342 K 06 B 5E60 R THIN FILM CODE (1) V for K, L and M TCR W/tolerance 1 % M = Part marked (2) SERIES TCR CHARACTERISTIC CASE SIZE TERMINATION VALUE AND TOLERANCE FAILURE RATE s (1) Only add a V at the end of part number to specify for K, L and M TCR and tolerance 1 % and higher (2) Option 1 marking only case size 01, 02, 11, 12 not available due to size Revision: 13-Mar Document Number: 60018

73 E/H (T-Level) (Military M/D55342) QPL MIL-PRF Qualified Thin Film Resistor, Surface Mount Chip FEATURES T-level (space) qualified Passes outgassing requirements of ASTM-E595 requirements TCR to ± 25 ppm/ C Tolerances to ± 0.1 % 100 % power conditioning Thin Film MIL-PRF established reliability T level chip resistors feature a thin film resistor element and with all sputtered wraparound terminations that provide excellent adhesion and dimensional uniformanity. They are ideal in applications requiring stringent performance requirements. Established reliability is assured through 100 % screening and extensive environmental testing for every lot that includes complete 100 % group A, power conditioning and group B lot testing performed for T-level product assurance. TYPICAL PERFORMANCE ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tamelox resistor film (passivated nichrome) - Resistance Range 100 to 1.5 M - TCR: Absolute 25 ppm/ C (E), 50 ppm/ C (H) - 55 C to C Tolerance: Absolute ± 0.1 % + 25 C Stability: Absolute R ± 0.02 % 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v - Working Voltage 40 V to 125 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 25 db - Thermal EMF < 0.1 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C COMPONENT RATINGS CASE SIZE MAX. WORKING VOLTAGE (V) POWER RATING (mw) E (0.1 %, 0.25 %, 0.5 %) RESISTANCE RANGE ( ) BY CHARACTERISTICS TOLERANCE E (1 %, 2 %, 5 %) H, K, L, M (0.1 %, 0.25 %, 0.5 %) H, K, L, M (1 %, 2 %, 5 %) M55342/ to 301K 49.9 to 301K 20 to 301K 20 to 301K M55342/ to 649K 49.9 to 649K 10 to 649K 10 to 649K M55342/ to 1.69M 49.9 to 1.69M 10 to 1.69M 10 to 1.69M M55342/ to 475K 49.9 to 475K 10 to 475K 10 to 475K D55342/ to 1.5M 49.9 to 1.5M 10 to 1.5M 10 to 1.5M M55342/ to 1M 49.9 to 1M 49.9 to 1M 49.9 to 1M Revision: 13-Mar Document Number: 60060

74 E/H (T-Level) (Military M/D55342) DIMENSIONS in inches D T L E W CASE SIZE TERM. L W T D E M55342/02 B ± ± to ± ± M55342/03 B ± ± to ± ± M55342/04 B ± ± to ± ± M55342/06 B ± ± to ± ± D55342/07 B ± ± to / / M55342/10 B ± ± to ± ± ENVIRONMENTAL TESTS ENVIRONMENTAL TEST MIL-PRF LIMITS ( R ±) VISHAY PERFORMANCE ( R ±) Thermal Shock 0.10 % 0.02 % Low Temperature Operation 0.10 % 0.03 % Short Time Overload 0.10 % 0.05 % High Temperature Exposure 0.10 % 0.01 % Resistance to Bonding 0.20 % 0.01 % Moisture Resistance 0.20 % 0.04 % TCR ± 25 ppm/ C < 15 ppm/ C Life (2000 h at + 70 C) 0.05 % 0.02 % Life ( h at + 70 C) 2.00 % 0.04 % MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Chip Terminations Tamelox Alumina Solder over nickel Fused Solder Plated solder SN 90/10 Revision: 13-Mar Document Number: 60060

75 E/H (T-Level) (Military M/D55342) GLOBAL PART NUMBER INFORMATION Global Part Numbering: M55342E06B1C00TTS M E 0 7 B 1 C 0 0 T T S V MODEL M55342 or D55342 (/07 size only) TCR CHARACTERISTIC E = 25 ppm/ C H = 50 ppm/ C K = 100 ppm/ C (1) L = 200 ppm/ C M = 300 ppm/ C (1) CASE SIZE 02 = = = = = = 1010 TERMINATION B = Solderable OHMIC VALUE Three digits and a letter. Letter identifies tolerance, acts as multiplier and decimal locator. MULTIPLIER Tolerance 1 1 k 1 M 0.1 % A B C 0.25 % R U V 0.5 % W Y Z 1 % D E F 2 % G H T 5 % J K L 10 % M N P PRODUCT LEVEL DESIGNATOR T = Space level PACKAGING BS =BULK 1 min., 1 mult WAFFLE PACK WS =WAFFLE 25 min., 1 mult WI = 25 min., 1 mult (item single lot date code) WP = 25 min., 1 mult (package unit single lot date code) W0 = 100 min.,100 mult TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult TI = 100 min., 1 mult (item single lot date code) TP = 100 min., 1 mult (package unit single lot date code) VENDOR V = Vishay Thin Film (1) M = Part marked (2) s (1) For K, L and M TCR 1 % tolerance add a V at end of part number to specify Vishay Thin Film vs. Dale Thick Film. E.g.: M55342K06B1F00TWSV (2) Option 1 marking only case size 02 not available Consult factory for additional case size qualification pending Revision: 13-Mar Document Number: 60060

76 E/H (Ta2N) (Military M/D55342) QPL MIL-PRF Qualified Ta 2 N Thin Film Resistor, Surface Mount Chip Thin Film MIL chip resistors feature an all sputtered wraparound termination for excellent adhesion and dimensional uniformity. They are ideal in applications requiring stringent performance requirements. Established reliability is assured through 100 % screening and extensive environmental lot testing. CONSTRUCTION Passivation Tantalum Nitride Resistor Film Solder Coating Nickel Barrier High Purity Alumina Substrate Adhesion Layer FEATURES Established reliability, R failure rate level (0.01 % per 1000 h), C = 2 High purity alumina substrate 99.5% Al 2 O 3 Wraparound termination featuring a tenacious adhesion layer covered with an electroplated nickel barrier layer for C operating conditions Very low noise and voltage coefficient (< - 25 db, 0.5 ppm/v) Non-inductive Laser-trimmed tolerances ± 0.1 % Complete MIL-testing available in-house Antistatic waffle pack or tape and reel packaging available Military/aerospace/QPL approval TYPICAL PERFORMANCE ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride (Ta 2 N) resistor film - Resistance Range 49.9 to 3.3 M - TCR: Absolute ± 25 ppm/ C to ± 300 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 10 % + 25 C Stability: Absolute R ± 0.02 % 2000 h at + 70 C Stability: Ratio - - Voltage Coefficient 0.1 ppm/v - Working Voltage 30 V to 200 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 25 db - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C COMPONENT RATINGS POWER CASE SIZE RATING (mw) WORKING VOLTAGE (V) RESISTANCE RANGE BY TOLERANCE 0.1 %, 0.25 %, 0.5 %, 1 % 2.0 % and 5.0 % 10 % M55342/ to 64.9 k 51 to 68 k 51 to 68 k M55342/ to 140 k 51 to 150 k 51 to 150 k M55342/ to 357 k 51 to 360 k 51 to 360 k M55342/ to 806 k 51 to 820 k 51 to 820 k M55342/ to 1.5 M 51 to 1.5 M 51 to 1.5 M M55342/ to 309 k 51 to 820 k 51 to 820 k D55342/ to 1 M 51 to 1 M 51 to 1 M M55342/ to 2.0 M 49.9 to 2.0 M 51 to 2.23 M M55342/ to 3.01 M 51 to 3 M 51 to 3.3 M M55342/ to 604 k 51 to 620 k 51 to 680 k M55342/ to 49.9 k 51 to 51 k 51 to 51 k M55342/ to 130 k 51 to130 k 51 to 150 k Values listed are a guide, refer to MIL spec for value/tolerance allowance Revision: 28-May Document Number: 60120

77 E/H (Ta2N) (Military M/D55342) DIMENSIONS in inches D T L E W CASE SIZE TERM. L W T D E M55342/01 B ± ± to ± ± M55342/02 B ± ± to ± ± M55342/03 B ± ± to ± ± M55342/04 B ± ± to ± ± M55342/05 B ± ± to ± ± M55342/06 B ± ± to ± ± D55342/07 B ± ± to / / M55342/08 B / ± to ± ± M55342/09 B / ± to ± ± M55342/10 B ± ± to ± ± M55342/11 B ± ± to ± ± M55342/12 B ± ± to ± ± ENVIRONMENTAL TESTS ENVIRONMENTAL TEST MIL-PRF LIMITS ( R ±) VISHAY PERFORMANCE ( R ±) Thermal Shock 0.1 % % Low Temperature Operation 0.1 % % Short Time Overload 0.1 % % High Temperature Exposure 0.1 % % Resistance to Bonding 0.2 % % Moisture Resistance 0.2 % % TCR ± 25 ppm/ C < 15 ppm/ C Life (2000 h at + 70 C) 0.5 % 0.02 % Life ( h at + 70 C) 2.0 % 0.04 % MECHANICAL SPECIFICATIONS Resistive Element Tantalum nitride (Ta 2 N) Substrate Material Alumina Chip Terminations Solder over nickel Plated Solder 90/10 FSCM CAGE # Revision: 28-May Document Number: 60120

78 E/H (Ta2N) (Military M/D55342) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M55342E06B9B00MT12 M E 0 6 B 9 B 0 0 M T 1 4 GLOBAL MODEL M55342 or D55342 (/07 size only) TCR CHARACTERISTIC E = 25 ppm/ C H = 50 ppm/ C K = 100 ppm/ C L = 200 ppm/ C M = 300 ppm/ C CASE SIZE 01 = = = = = = = = = = = = 0603 TERMINATION B = Solderable OHMIC VALUE Three digits and a letter. Letter identifies tolerance, acts as multiplier and decimal locator. MULTIPLIER Tolerance 1 1 k 1 M 0.1 % A B C 0.25 % R U V 0.50 % W Y Z 1 % D E F 2 % G H T 5 % J K L 10 % M N P FAILURE RATE M = 1.0 % per 1000 h P = 0.1 % per 1000 h R = 0.01 % per 1000 h PACKAGING Standard Packaging: BS =BULK 100 min., 1 mult WS =WAFFLE 100 min., 1 mult TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel ( 2K, 4K, or 5K dependent on case size ) per tape and reel document TS = 100 min., 1 mult Special Packaging: WAFFLE WI = 100 min., 1 mult (item single lot date code) WP =100 min., 1 mult (package unit single lot date code) TAPE AND REEL TI = 100 min., 1 mult (item single lot date code) TP = 100 min., 1 mult (package unit single lot date code) THIN FILM CODE (1) 4 for Ta 2 N resistor film type Revision: 28-May Document Number: 60120

79 D.S.C.C. Specifications D.S.C.C. Specifications (Formerly DESC) Vishay Thin Film (Niagara Falls) is listed on the following D.S.C.C. specifications: D.S.C.C. SPECIFICATIONS SURFACE MOUNT RESISTOR NETWORKS PIN Surface Mount SOT-23 Voltage Divider PIN Surface Mount Gull Wing Resistor Network PIN Leadless Chip Carrier PIN Leadless Chip Carrier PIN Leadless Chip Carrier PIN Leadless Chip Carrier THICK FILM PIN Leadless Chip Carrier PIN DIP HERMETIC PIN SIP D.S.C.C. SPECIFICATIONS SURFACE MOUNT CHIP RESISTORS Zero Ohm Wraparound Chip (1010 Size) Zero Ohm Wraparound Chip (2208 Size) Zero Ohm Wraparound Chip (0805 Size) Zero Ohm Wraparound Chip (1005 Size) Zero Ohm Wraparound Chip (1505 Size) Zero Ohm Wraparound Chip (1206 Size) MOISTURE RESISTANT PTN Wraparound Chip Resistor (0505 Size) MOISTURE RESISTANT PTN Wraparound Chip Resistor (1005 Size) MOISTURE RESISTANT PTN Wraparound Chip Resistor (2208 Size) MOISTURE RESISTANT PTN Wraparound Chip Resistor (0705 Size) MOISTURE RESISTANT PTN Wraparound Chip Resistor (1206 Size) MOISTURE RESISTANT PTN Wraparound Chip Resistor (2010 Size) MOISTURE RESISTANT PTN Wraparound Chip Resistor (2512 Size) MOISTURE RESISTANT PTN Wraparound Chip Resistor (1010 Size) MOISTURE RESISTANT PTN Wraparound Chip Resistor (0502 Size) MOISTURE RESISTANT PTN Wraparound Chip Resistor (1505 Size) MOISTURE RESISTANT PTN Wraparound Chip Resistor (0402 Size) MOISTURE RESISTANT PTN Wraparound Chip Resistor (0603 Size) Low and High Values, 1.0 M to 10 M (1206 Size) Low Values, 0.1 to 1 (1206 Size) Low Values, 0.1 to 1 (0603 Size) Low Value Chip Resistor 1005 Case Size 0.1 to Low Value Chip Resistor 1505 Case Size 0.1 to Low Value Chip Resistor 0705 Case Size 0.1 to Low Value Chip Resistor 2010 Case Size 0.1 to Low Value Chip Resistor 2512 Case Size 0.1 to Revision: 30-Jul Document Number: 60020

80 P-NS Commercial Thin Film Resistor, Surface Mount Chip For applications requiring low noise, stability, low temperature coefficient of resistance, and low voltage coefficient, all Vishay s proven precision thin film wraparound resistors will meet your exact requirements. Manufactured with the same material and processes as QPL and manufactured in a QPL facility. CONSTRUCTION SPM Passivation Enhancement Passivated Nichrome Resistive Film Solder Coating Nickel Barrier High Purity Alumina Substrate Adhesion Layer Actual Size 0505 FEATURES Moisture resistant (SPM) special passivation method Non-standard values available Available Pre-tinned terminations over nickel barrier Available (gold available) Very low noise and voltage coefficient (< - 35 db, 0.1 ppm/v) Available Non-inductive Laser-trimmed tolerances to 0.02 % Available In-lot tracking less than 5 ppm/ C Epoxy bondable termination available Sulfur resistant (per ASTM B humid vapor test) Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Resistance Range 10 to 6.19 M - TCR: Absolute ± 10 ppm/ C to 100 ppm/ C - 55 C to C Tolerance: Absolute ± 0.02 % to ± 5 % + 25 C Stability: Absolute R ± 0.02 % 2000 h at 70 C Stability: Ratio - - Voltage Coefficient 0.1 ppm/v (typical) - Working Voltage 75 V to 200 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 35 db (typical) - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C COMPONENT RATINGS CASE SIZE (1) POWER RATING WORKING VOLTAGE RESISTANCE RANGE ( ) (mw) (V) 0.1 % < 0.1 % to 100K 250 to 100K to 150K 250 to 150K to 301K 250 to 301K to 261K 250 to 261K to 475K 250 to 475K to 475K 250 to 475K to 649K 250 to 649K to 1M 250 to 1M to 1.5M (2) 250 to 1M to 1M 250 to 1M to 3.16M (2) 250 to 1M to 4.02M (2) 250 to 1M to 6.19M (2) 250 to 1M s (1) 0705 and 0805 are the same (only use 0805 when ordering) (2) Values > 1M best TCR ± 25 ppm/ C Revision: 27-Jun Document Number: 60023

81 P-NS DIMENSIONS in inches D T E L CASE SIZE TERM L W T D E 0402 B ± ± to ± ± B ± ± to ± ± B ± ± to ± ± B ± ± max ± ± , 0805 (1) B ± ± to ± ± B ± ± to ± ± B ± ± to ± ± B ± ± to / / B ± ± to ± ± B ± ± to ± ± B ± ± to ± ± B ± ± to ± ± (1) 0705 and 0805 are the same (only use 0805 when ordering) W ENVIRONMENTAL TESTS ENVIRONMENTAL TEST 10 k R ± (%) 100 k R ± (%) Thermal Shock Short Time Overload Low Temperature Operation Resistance to Solder Heat Moisture Resistance High Temperature Exposure Load Life ( h, + 70 C) TCR ± 25 ppm/ C ± 25 ppm/ C DERATING CURVE Precent of Rated Power Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: P-1206E1002BBTS P E B B T S GLOBAL MODEL CASE SIZE P TCR CHARACTERISTIC Y = ± 10 ppm/ C (2) D = ± 15 ppm/ C E = ± 25 ppm/ C H = ± 50 ppm/ C K = ± 100 ppm/ C (2) > 250 RESISTANCE TOLERANCE TERMINATION PACKAGING The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. Example: 10R0 = = 1 k 1002 = 10 k Q = ± 0.02 % (3) A = ± 0.05 % (3) B = ± 0.1 % D = ± 0.5 % F = ± 1 % G = ± 2 % J = ± 5 % (3) For values 250 B = Wraparound Sn/Pb solder 63 % Sn/37 % Pb w/ nickel barrier G = Wraparound Au over Ni (gold) termination epoxy bondable RoHS-compliant - e4 S = Wraparound electroplated 100 % pure matte tin RoHS-compliant e3 BULK BS = 100 min., 1 mult WAFFLE WS = 100 min., 1 mult W0 = 100 min.,100 mult WI = 100 min.,1 mult (4) WP = 100 min.,1 mult (5) TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (6) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult TI = 100 min., 1 mult (4) TP = 100 min., 1 mult (5) s (4) Item single lot date code (5) Package unit single lot date code (6) Preferred packaging code Historical Part Number Example: P0805H6801BBT (for reference purposes only) P 0805 H 6801 B B T STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING Revision: 27-Jun Document Number: 60023

82 Commercial Thin Film Chip Resistor, Surface Mount Chip PTN These chip resistors are available in both top side and wraparound termination styles in a variety of sizes. They incorporate self passivated, enhanced Tantalum Nitride films, to give superior performance on moisture resistance, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating. This product will out-perform all requirements of characteristic E of MIL-PRF CONSTRUCTION Passivation T antalum Nitride Resistive Film Solder Coating Nickel Barrier High Purity Alumina Substrate Adhesion Layer Actual Size 1505 FEATURES Moisture resistant High purity alumina substrate Non-standard values available Available Will pass + 85 C, 85 % relative humidity and 10 % rated power Available 100 % visual inspected per MIL-PRF Non-inductive Available Very low noise and voltage coefficient (< - 30 db) Laser-trimmed tolerances to ± 0.1 % Available Wraparound resistance less than 10 m Epoxy bondable termination available Sulfur resistant (per ASTM B humid vapor test) Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 10 to 3 M - TCR: Absolute ± 25 ppm/ C to ± 100 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 5 % + 25 C Stability: Absolute R ± 0.03 % 2000 h at 70 C Stability: Ratio - - Voltage Coefficient 0.1 ppm/v - Working Voltage 75 V to 200 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Shelf Life Stability: Absolute - - COMPONENT RATINGS CASE SIZE (1) POWER RATING (mw) WORKING VOLTAGE (V) RESISTANCE RANGE ( ) to 51.1K to 65K to 130K to 130K to 301K to 301K to 360K to 600K to 1M to 1M to 1.75M to 2M to 3M (1) 0705 and 0805 are the same (only use 0805 when ordering) Revision: 07-Mar Document Number: 60026

83 PTN DIMENSIONS in inches D T L E W CASE SIZE L W T D E ± ± to ± ± ± ± to ± ± ± ± to ± ± ± ± max ± ± , 0805 (1) ± ± to ± ± ± ± to ± ± ± ± to ± ± ± ± to / / ± ± to ± ± ± ± to ± ± ± ± to ± ± ± ± to ± ± (1) 0705 and 0805 are the same (only use 0805 when ordering) ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF Requirements) ENVIRONMENTAL TEST LIMITS MIL-PRF CHARACTERISTIC E TYPICAL VISHAY PERFORMANCE Resistance Temperature Characteristic ± 25 ppm/ C ± 15 ppm/ C Max. Ambient Temp. at Rated Wattage + 70 C + 70 C Max. Ambient Temp. at Power Derating C C Thermal Shock R ± 0.1 % ± % Low Temperature Operation R ± 0.1 % ± % Short Time Overload R ± 0.10 % ± % High Temperature Exposure R ± 0.1 % ± 0.04 % Resistance to Soldering Heat R ± 0.2 % ± % Moisture Resistance R ± 0.2 % ± % Life + 70 C at 1000 h R ± 0.50 % ± 0.02 % Insulation Resistance minimum > M Revision: 07-Mar Document Number: 60026

84 PTN FILM LOAD LIFE STABILITY (at C) 0.1 % 0.06 % 0.05 % 0.04 % 0.03 % 0.02 % 0.01 % % % % % % Maximum Absolute Change Percent of Rated Power DERATING CURVE % Time in h at C Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PTN1206E1002BBT1 P T N E B B T 1 GLOBAL MODEL CASE SIZE PTN TCR CHARACTERISTIC E = ± 25 ppm/ C H = ± 50 ppm/ C K = ± 100 ppm/ C RESISTANCE TOLERANCE TERMINATION PACKAGING The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. Example: 10R0 = = = 1 k B = ± 0.1 % D = ± 0.5 % F = ± 1 % G = ± 2 % J = ± 5 % Historical Part Number example: PTN0805H8801BBT (for reference purposes only) B = Wraparound Sn/Pb solder Sn63 w/nickel barrier G = Wraparound Au over Ni (gold) termination epoxy bondable RoHS compliant - e4 S = Wraparound electroplated 100 % pure matte tin RoHS-compliant - e3 BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult W0 = WAFFLE 100 min., 100 mult TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (1) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult PTN 0805 H 8801 B B T STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING (1) Preferred packaging code Revision: 07-Mar Document Number: 60026

85 Low Value (0.03 to 10 ) Thin Film Resistor, Surface Mount Chip With extremely low resistances and high power capabilities, Vishay s proven and unique ultra-low value resistors can be used in your hybrid or surface-mount applications. These resistors are available with solderable or weldable terminations. CONSTRUCTION Passivation Resistor Film High Purity Alumina Adhesion Layer Actual Size 0805 Solder Coating Nickel Barrier L-NS FEATURES Homogeneous nickel alloy film No inductance for high-frequency applications Alumina substrates for high power handling Available capability (2 W maximum power rating) Pre-soldered or gold terminations Available Epoxy bondable termination available Sulfur resistant (per ASTM B humid vapor test) Available Material categorization: For definitions of compliance please see Available * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TCR 300 TOL. 1.0 VALUE AND MINIMUM TOLERANCE VALUE ( ) MINIMUM TOLERANCE 0.1 ± 2.0 % 0.25 ± 1.0 % 0.5 ± 1.0 % 1.0 ± 1.0 % 2.0 ± 1.0 % 10.0 ± 1.0 % < % STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Nickel alloy - Resistance Range 0.03 to 10 - TCR: Absolute ± 300 ppm/ C - 55 C to C Tolerance: Absolute 1 % to 20 % (value dependent) - Stability: Absolute - - Stability: Ratio - - Voltage Coefficient - - Working Voltage P x R - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 35 db (typical) - Shelf Life Stability: Absolute - - COMPONENT RATINGS CASE SIZE (1) POWER RATING (mw) RESISTANCE RANGE ( ) to to to to / to to to to to to to to 10.0 s Resistor values beyond ranges shall be reviewed by the factory (1) 0705 and 0805 are the same (only use 0805 when ordering) Revision: 11-Jun Document Number: 60027

86 L-NS DIMENSIONS in inches and millimeters D T W SIZE CASE SIZE L W T D INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS / / ± ± 0.13 MAX / / , 0805 (1) (1) 0705 and 0805 are the same (only use 0805 when ordering) L MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Terminals Lead (Pb)-free Option Tin/Lead Option Lead (Pb)-free Finish and Tin/Lead Nickel alloy Alumina Pre-soldered or gold 96.5 % Sn, 3.0 % Ag, 0.5 % Cu Sn63 Hot solder dip ENVIRONMENTAL TESTS ENVIRONMENTAL TEST LIMITS (1) R ± % TYPICAL 1 R ± % STO (2) LTO RSH Moisture HTE Load Life (2000 h at + 70 C) TCR (ppm) ± s (1) 0.01 additional allowed for measurement error (2) Testing conducted at 2.0 x working voltage on 2512 case size all other 2.5 x DERATING CURVE Precent of Rated Power Ambient Temperature C Revision: 11-Jun Document Number: 60027

87 L-NS GLOBAL PART NUMBER INFORMATION New Global Part Numbering: L-1206M1R00GBT1 L M 1 R 0 0 G B T 1 GLOBAL MODEL L- = Low value wraparound chip resistor CASE SIZE (1) TCR CHARACTERISTICS M = 300 ppm/ C N = 350 ppm/ C O = 400 ppm/ C P = 500 ppm/ C OHMIC VALUE First 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. Example: 0R10 = 0.1 1R60 = 1.6 TOLERANCE TERMINATION PACKAGING F = 1 % G = 2 % H = 3 % J = 5 % K = 10 % L = 20 % Historical Part Number Example: L1206M1R00HBT (for reference purposes only) B = Wraparound Sn/Pb solder 63 % Sn/37 % Pb w/ nickel barrier G = Wraparound Au over Ni (gold) termination epoxy bondable RoHS compliant - e4 W = Top side wire bondable Au (gold) RoHS compliant - e4 S = Wraparound lead (Pb)-free solder 96.5 % Sn/3.0 % Ag/ 0.5 % Cu RoHS compliant - e1 BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (1) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TI = 100 min., 1 mult (item single lot date code) TS = 100 min., 1 mult L 1206 M 1R00 H B T STYLE CASE SIZE TCR CHARACTERISTICS OHMIC VALUE TOLERANCE TERMINATION PACKAGING (1) Preferred packaging code Revision: 11-Jun Document Number: 60027

88 High Reliability Thick Film Resistor, Surface Mount Chip M Actual Size 0502 Utilizing proven expertise in thick and thin film resistors to satisfy your manufacturing needs, Vishay provides a high rel chip with the same reliability and stability found in military grade resistors. These chips are available in the widest range of sizes, values, and performance characteristics. And manufactured on the Mil-PRF qualified controlled production line All product is 100 % electrical tested for tolerance and after thermal shock testing and typically meet the requirements of group A in MIL-PRF performance. CONSTRUCTION Overglaze Resistor FEATURES High purity alumina substrate for high power dissipation (2 W max.) Wraparound terminations featuring a thin film Available adhesion layer covered with a leach resistant nickel barrier layer for C operating Available conditions High speed laser trimming for high volume requirements Available Ruthenium based cermet thick film for dependable performance Fired-on glass passivation Available Tape and reel packaging standard; static-free waffle pack available Active trim and 0 chips Sulfur resistant (per ASTM B humid vapor test) Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE Alumina Substrate Inner Electrode Nickel Barrier Plated Solder ABSOLUTE TC00 TOL. 1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Ruthenium - Resistance Range 10 to 25 M - TCR: Absolute ± 100 ppm/ C to ± 300 ppm/ C - 55 C to C Tolerance: Absolute ± 1 % to ± 10 % - Stability: Absolute R ± 0.15 % - Stability: Ratio - - Voltage Coefficient - - Working Voltage 25 V to 200 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 35 db (typical) - Shelf Life Stability: Absolute - - COMPONENT RATINGS CASE SIZE (1) POWER RATING (mw) WORKING VOLTAGE (V) RESISTANCE RANGE ( ) to 10M to 25M to 25M to 25M to 25M to 25M to 25M to 25M to 25M to 25M to 25M to 25M to 25M to 25M s Consult factory for nominals above 25 M (1) 0705 and 0805 are the same (only use 0805 when ordering) Revision: 28-Sep Document Number: 60031

89 M DIMENSIONS in inches D T L E W CASE SIZE TERM L W T D E 0402 B ± ± to ± ± B ± ± max ± ± B ± ± ± ± ± B ± ± to ± ± B ± ± to ± ± , 0805 (1) B ± ± to ± ± B ± ± to ± ± B ± ± to ± ± B ± ± to / / B ± ± to ± ± B ± ± to ± ± B ± ± to ± ± B ± ± to ± ± (1) 0705 and 0805 are the same (only use 0805 when ordering) ENVIRONMENTAL TESTS ENVIRONMENTAL TEST 10 R ± (%) 100 k R ± (%) Thermal Shock Short Term Overload Low Temperature Operation Resistance to Solder Heat Moisture Resistance High Temperature Exposure DERATING CURVE 100 Precent of Rated Power Ambient Temperature C Revision: 28-Sep Document Number: 60031

90 M GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M-1206K5001GBT1 M K G B T 1 GLOBAL MODEL M- = High rel cermet thick film wraparound CASE SIZE TCR CHARACTERISTIC K = 100 ppm/ C M = 300 ppm/ C X = 0 jumper RESISTANCE TOLERANCE TERMINATION PACKAGING First 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. Example: 10R0 = = 10 k F = 1 % G = 2 % J = 5 % K = 10 % N = Not trimmed Historical Part Number example: M0505K1003JBT (for reference purposes only) B = Wraparound tin/lead plated solder S = Wraparound lead (Pb)-free plated solder G = Epoxy bondable BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (1) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult M 0505 K 1003 J B T STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING (1) Preferred packaging code Revision: 28-Sep Document Number: 60031

91 FC High Frequency (up to 20 GHz) Resistor, Thin Film Surface Mount Chip FC series chip resistors are designed with low internal reactance. They function as almost pure resistors on a very high range of frequencies. The specialized laser edge trimming allows for precision tolerances to 0.1 %. FEATURES Small standard size 0402 case size Edge trimmed block resistors Available Alumina substrate high purity (99.6 %) Available Ohmic range (10 to 1000 ) Small internal reactance (< 10 m ) Available Low TCR (down to ± 25 ppm/ C) Epoxy bondable termination available Available Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. APPLICATIONS Low noise amplifiers Attenuation Line termination STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Resistance Range 10 to 1000 Case size dependent TCR: Absolute ± 25 ppm/ C to ± 100 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 5.0 % + 25 C Stability: Absolute R ± 0.02 % 2000 h at 70 C Stability: Ratio - - Voltage Coefficient 0.1 ppm/v - Working Voltage 30 V to 75 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 35 db - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C COMPONENT RATINGS CASE SIZE POWER RATING (mw) WORKING VOLTAGE (V) RESISTANCE RANGE ( ) to to to to to to 1000 Revision: 27-Sep Document Number: 60093

92 FC DIMENSIONS in inches (millimeters) L L D E D T W T CASE SIZE LENGTH ± (1.067 ± 0.203) ± (1.397 ± 0.152) ± (1.626 ± 0.152) ± (2.032 ± 0.152) ± (2.667 ± 0.203) ± (3.200 ± 0.203) WIDTH W (± 0.005) (0.559) (1.270) (0.813) (1.270) (1.270) (1.600) THICKNESS TYPICAL (0.381) (0.381) (0.381) (0.381) (0.381) (0.381) TOP PAD D (± 0.005) (0.254) (0.254) (0.305) ± (0.406 ± 0.203) (0.381) BOTTOM PAD E (± 0.005) (0.254) (0.381) (0.381) (0.381) (0.381) / ( / ) MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Terminations Lead (Pb)-free Option Tin/Lead Option Lead (Pb)-free Finish and Tin/Lead Passivated nichrome Alumina Pre-soldered or gold 96.5 % Sn, 3.0 % Ag, 0.5 % Cu Sn63 Hot solder dip GLOBAL PART NUMBER INFORMATION New Global Part Numbering: FC1206E1001BBTS F C E B B T S F C K B T B S T S GLOBAL MODEL CASE SIZE FC (1) Preferred packaging code TCR CHARACTERISTIC E = 25 ppm/ C H = 50 ppm/ C K = 100 ppm/ C RESISTANCE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. Example: 10R0 = = = 1 k TOLERANCE B = 0.1 % D = 0.5 % F = 1 % G = 2 % J = 5 % TERMINATION (1, 2 or 3 digits) T = Top sided Au (gold) term Au over Ni epoxy bondable RoHS compliant - e4 B = Wraparound Sn/Pb solder 63 % Sn/37 % Pb w/nickel barrier G = Wraparound Au over Ni (gold) termination epoxy bondable RoHS compliant - e4 TB = Top sided Sn/Pb solder 63 % Sn/37 % Pb w/nickel barrier TBS = Top sided lead (Pb)-free solder w/nickel barrier RoHS compliant - e1 S = Wraparound lead (Pb)-free solder 96.5 % Sn/3.0 % Ag/0.5 %Cu RoHS compliant - e1 PACKAGING BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (1) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult Historical Part Number example: FC1206E1001BBT (for reference purposes only) FC 1206 E 1001 B B T SERIES CASE SIZE TCR CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING Revision: 27-Sep Document Number: 60093

93 FC TYPICAL HIGH FREQUENCY PERFORMANCE ELECTRICAL MODEL AND TESTING C C: Internal shunt capacitance L : Internal inductance R: Resistance L C : External connection inductance C g : External capacitance to ground L C R L L C C g Lumped Equivalent Circuit Reference plane is at the resistor-bonding pad interface. C g The lumped circuit above was used to model the data at the bonding pad-resistor reference plane. High frequency testing was performed by Modelithics, Inc. on parts mounted to quartz test boards. Quartz test boards were chosen to minimize the contribution of the board effects at high frequencies. INTERNAL IMPEDANCE 0402 Flip chip 0603 Flip chip Zin /R C = pf C = pf 1.6 L = nh 50 Ω 1.6 L = nh Ω Ω 100 Ω 250 Ω Ω 250 Ω Ω Ω 1000 Ω 1000 Ω Frequency (GHz) Frequency (GHz) 0402 Wraparound Zin /R Zin /R 1.8 C = pf 50 Ω 1.6 L = nh Ω Ω 100 Ω 500 Ω Frequency (GHz) Revision: 27-Sep Document Number: 60093

94 FC VSWR FC Series 0402 size 50 Ω Frequency (GHz) VSWR FC Series 0402 size 100 Ω Frequency (GHz) Revision: 27-Sep Document Number: 60093

95 PNM Precision Thin Film Non-Magnetic Resistor, Surface Mount Chip, ± 25 ppm/ C, Tolerances to 0.1 % These devices eliminate materials that would disturb magnetic fields applications such as in MRI magnetic resonance imaging machines. The PNM series chip resistor has been carefully engineered with non-magnetic materials to eliminate the effects of these stray magnetic fields on circuit performance, thereby resulting in simplified shielding requirements and improved sound quality in audio applications. Providing signal conditioning without distortion from magnetic fields. CONSTRUCTION Passivation Tantalum Nitride Resistive Film Solder coating Barrier layer High Purity Alumina Substrate Adhesion layer Actual Size 1505 FEATURES Non-magnetic Moisture resistant Available High purity alumina substrate Non-standard values available Available MIL-STD-202 method 106 moisture resistance with 10 % power Available 100 % visual inspected per MIL-PRF Very low noise and voltage coefficient (< - 30 db) Non-inductive Laser-trimmed tolerances to ± 0.1 % Wraparound resistance less than 10 m Sulfur resistant (per ASTM B humid vapor test)n Material categorization: For definitions of compliance please see * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 10 to 3 M - TCR: Absolute ± 25 ppm/ C to ± 100 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 C Stability: Absolute R ± 0.03 % - Stability: Ratio - - Voltage Coefficient 0.1 ppm/v - Working Voltage 75 V to 200 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Shelf Life Stability: Absolute - - COMPONENT RATINGS CASE SIZE (1) POWER RATING (mw) WORKING VOLTAGE (V) RESISTANCE RANGE ( ) to 35K to 65K to 130K to 130K to 301K to 301K to 301K to 600K to 1M to 1M to 1.75M to 2M to 3M (1) 0705 and 0805 are the same (only use 0805 when ordering) Revision: 17-Apr Document Number: 60057

96 PNM DIMENSIONS in inches D T L E W CASE SIZE L W T D E ± ± to ± ± ± ± to ± ± ± ± to ± ± ± ± Max ± ± , 0805 (1) ± ± to ± ± ± ± to ± ± ± ± to ± ± ± ± to / / ± ± to ± ± ± ± to ± ± ± ± to ± ± ± ± to ± ± (1) 0705 and 0805 are the same (only use 0805 when ordering) ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF Requirements) ENVIRONMENTAL TEST LIMITS MIL-PRF CHARACTERISTIC H TYPICAL VISHAY PERFORMANCE Resistance Temperature Characteristic ± 50 ppm/ C ± 35 ppm/ C Max. Ambient Temperature at Rated Wattage + 70 C + 70 C Max. Ambient Temperature at Power Derating C C Thermal Shock R ± 0.25 % ± % Low Temperature Operation R ± 0.25 % ± % Short Time Overload R ± 0.10 % ± % High Temperature Exposure R ± 0.20 % ± % Resistance to Bonding Exposure R ± 0.25 % ± % Moisture Resistance R ± 0.40 % ± % Life + 70 C at 1000 hours R ± 0.50 % ± 0.03 % Insulation Resistance minimum > M Revision: 17-Apr Document Number: 60057

97 PNM FILM LOAD LIFE STABILITY (at C) DERATING CURVE 0.1 % 0.06 % 0.05 % 0.04 % 0.03 % 0.02 % 0.01 % % % % % % Maximum Absolute Change Percent of Rated Power % Time in h at C Ambient Temperature C GLOBAL PART NUMBER INFORMATION P N M E B B T 1 GLOBAL MODEL PNM Nonmagnetic resistor CASE SIZE TCR CHARACTERISTIC E = 25 ppm (R > 100 ) H = 50 ppm (R > 50 ) K = 100 ppm (R > 10 ) RESISTANCE TOLERANCE TERMINATION PACKAGING The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. Example: 10R0 = = = 1 k B = ± 0.1 % (1) D = ± 0.5 % F = ± 1 % G = ± 2 % J = ± 5 % B = Wraparound Sn/Pb solder 63 % Sn/ 37 % Pb S = Wraparound lead (Pb)-free solder 96.5 % Sn/3.0 % Ag/ 0.5 % Cu RoHS compliant - e1 BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult s (1) B = 0.1 % tolerance available only above 100. (2) Preferred packaging code. Revision: 17-Apr Document Number: 60057

98 PLT Precision Low TCR Thin Film Resistor, Surface Mount Chip, ± 5 ppm/ C TCR, 0.01 % Tolerance Vishay s proven precision thin film wraparound resistors will meet your exact requirements. These resistors are ideal for precision applications requiring low noise, stability, ultra low temperature coefficient of resistance, and low voltage coefficient. The chip resistors are available in any resistance ohmic value in the range specified below. CONSTRUCTION SPM Passivation Enhancement Passivated Nichrome Resistive Film Solder Coating Nickel Barrier High Purity Alumina Substrate Adhesion Layer Actual Size 0603 FEATURES TCR of ± 5 ppm/ C standard Tolerances to ± 0.01 % Available Anti corrosion resistant film with (SPM) special passivation method Available Stable film and performance characteristics ( R ± 0.04 % at 70 C, h) Non-standard resistance values available Very low noise and voltage coefficient (< - 30 db, 0.1 ppm/v) UL 94 V-0 flame resistant Material categorization: For definitions of compliance please see * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. TYPICAL PERFORMANCE ABSOLUTE TCR 5 TOL STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Resistance Range 250 to 775 k - TCR: Absolute ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 0.01 % + 25 C Stability: Absolute R ± 0.02 % 2000 h at 70 C Stability: Ratio - - Voltage Coefficient ± 0.1 ppm/v (typical) - Working Voltage 75 V to 200 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 35 db (typical) - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C COMPONENT RATINGS CASE SIZE POWER RATING (mw) WORKING VOLTAGE (V) RESISTANCE RANGE ( ) to 130K to 260K to 775K Revision: 25-Feb Document Number: 60030

99 PLT DIMENSIONS in inches D T L E W CASE SIZE TERM L W T D E 0603 B ± ± max ± ± B ± ± to ± ± B ± ± to / / ENVIRONMENTAL TESTS - TYPICAL ENVIRONMENTAL TEST 10 k R ± (%) 100 k R ± (%) Thermal Shock Short Time Overload Low Temperature Operation Resistance to Solder Heat Moisture Resistance High Temperature Exposure Load Life ( h, + 70 C) TCR ± 5 ppm/ C ± 5 ppm/ C DERATING CURVE Precent of Rated Power Ambient Temperature C GLOBAL PART NUMBER INFORMATION P L T Z Q B T 1 GLOBAL MODEL CASE SIZE PLT TCR CHARACTERISTIC Z = ± 5 ppm/ C RESISTANCE TOLERANCE TERMINATION PACKAGING The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. Example: 1001 = 1 k 2500 = 250 Special values with more than 4 significant figures, use a R for value below 1 k and a K for values greater than 1 k to signify a decimal point. 982R6 = R41 = L = ± 0.01 % (2) Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % B = Wraparound Sn/Pb solder w/ni barrier (63 % Sn/37 % Pb w/ nickel barrier) S = Wraparound lead (Pb)-free solder 96.5 % Sn/3.0 % Ag/ 0.5 % Cu RoHS compliant - e1 WS = WAFFLE PACK TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (1) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult s (1) Preferred packaging code (2) L = ± 0.01 % tolerance available only for resistance value greater than 250 Revision: 25-Feb Document Number: 60030

100 PLTT Precision Low TCR High Temperature Thin Film Resistor, Surface Mount Chip, ± 5 ppm/ C TCR, 0.02 % Tolerance Vishay s proven precision thin film wraparound resistors will meet your exact requirements. These resistors are ideal for use in oil industry precision applications requiring low noise, long term stability under high temperature, ultra low temperature coefficient of resistance, and low voltage coefficient. The chip resistors are available in any resistance ohmic value in the range specified below. CONSTRUCTION SPM Passivation Enhancement Passivated Nichrome Resistive Film Plated Gold (10 μ" to 20 μ") Nickel Barrier High Purity Alumina Substrate Adhesion Layer FEATURES - 55 C to 215 C operating temperature range TCR of ± 5 ppm/ C standard Available Tolerances to ± 0.02 % Anti corrosion resistant film with (SPM) special Available passivation method Stable film and performance characteristics 0.5 % max. at 2000 h, 215 C, 25 % rated power Non-standard resistance values available Very low noise and voltage coefficient (< - 30 db, 0.1 ppm/v) UL 94 V-0 flame resistant Gold terminations (10 μ" to 20 μ") Material categorization: For definitions of compliance please see * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. TYPICAL PERFORMANCE ABSOLUTE TCR 5 TOL STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Resistance Range 250 to 3 M - TCR: Absolute ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 0.02 % + 25 C Stability: Absolute R ± 0.5 % 2000 h at 215 C, 25 % rated power Stability: Ratio - - Voltage Coefficient ± 0.1 ppm/v (typical) - Working Voltage 100 V to 200 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 35 db (typical) - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C COMPONENT RATINGS CASE SIZE POWER RATING (mw) WORKING VOLTAGE (V) RESISTANCE RANGE ( ) at 70 C to 260K at 70 C to 775K at 70 C to 2M at 70 C to 3M Consult factory for additional case size Revision: 23-Oct Document Number: 60082

101 PLTT DIMENSIONS in inches D T L E W CASE SIZE TERM L W T D E 0805 G ± ± to ± ± G ± ± to / / G ± ± to ± ± G ± ± to ± ± ENVIRONMENTAL TESTS - TYPICAL ENVIRONMENTAL TEST 10 k R ± (%) 100 k R ± (%) Thermal Shock Short Time Overload Low Temperature Operation Resistance to Solder Heat Moisture Resistance High Temperature Exposure Load Life (25 % Power, 2000 h, C) TCR ± 5 ppm/ C ± 5 ppm/ C Percent of Rated Power DERATING CURVE Ambient Temperature C Maximum Δ (%) PLTT STABILITY TEST RESULTS Test Conditions: Case Size: 0805 Resistance Value: 500 Ω Applied Power: 25 % of rated power Test Chamber Temperature: 215 C Time on Test (h) Maximum Δ (%) PLTT k STABILITY TEST RESULTS Test Conditions: Case Size: 0805 Resistance Value: 50 kω Applied Power: 25 % of rated power Test Chamber Temperature: 215 C Time on Test (h) Performance obtained with following mounting conditions PCB: Polymide IPC-7831A STD land patterns Solder paste: PbSnAg (93.5/5/1.5) Revision: 23-Oct Document Number: 60082

102 PLTT GLOBAL PART NUMBER INFORMATION P L T T Z Q G T 1 GLOBAL MODEL CASE SIZE PLTT TCR CHARACTERISTIC Z = ± 5 ppm/ C RESISTANCE TOLERANCE TERMINATION PACKAGING The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % D = ± 0.5 % F = ± 1 % G = ± 2 % G = Wraparound Gold over Ni barrier (10 μ" min. Au) WS = WAFFLE WI = 100 min./1mult (item single lot date code) WP = 100 min./1mult (package unit single lot date code) Example: 1001 = 1 k 2500 = 250 Special values with more than 4 significant figures, use a R for value below 1 k and a K for values greater than 1 k to signify a decimal point. TAPE AND REEL T1 = 1000 min., 1000 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult TI = 100 min./1mult (item single lot date code) TP = 100 min., 1 mult (package unit single lot date code) 982R6 = R41 = Revision: 23-Oct Document Number: 60082

103 Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kv ESD Rating PAT These chip resistors are available in wraparound terminations styles in 8 case sizes. They incorporate self passivated enhanced tantalum nitride resistor film to give superior performance on moisture resistance, electrostatic discharge, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating (lead (Pb)-free). This product will out-perform all requirements of AEC-Q200. CONSTRUCTION Passivation T antalum Nitride Resistive Film Solder Coating Nickel Barrier High Purity Alumina Substrate Adhesion Layer FEATURES Resistance range: 10 to 3 M AEC-Q200 qualified AEC-Q200 ESD rated class 1C (2 kv) Laser trimmed to any value Moisture resistant to MIL-STD-202, method 202 Tantalum nitride resistor film on high purity alumina substrate 100 % visual inspected per MIL-PRF Laser-trimmed tolerances to ± 0.1 % Load life stability < 0.05 % at 1000 h at 70 C Very low noise and voltage coefficient (< - 30 db, < 0.1 ppm/v) Sulfur resistant (per ASTM B humid vapor test) Material categorization: For definitions of compliance please see TYPICAL PERFORMANCE ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 10 to 3 M - TCR: Absolute ± 25 ppm/ C to ± 100 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 C Stability: Absolute ± 0.05 % 2000 h at 70 C rated power Stability: Ratio Not applicable - Voltage Coefficient Less than 0.1 ppm/v - Working Voltage 75 V to 200 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Shelf Life Stability: Absolute 100 ppm 1 year at 25 C COMPONENT RATINGS CASE SIZE POWER RATING (mw) WORKING VOLTAGE (V) RESISTANCE RANGE ( ) to 35K to 80K to 301K to 1M to 1M to 1.75M to 2M to 3M Revision: 25-Apr Document Number: 60024

104 PAT DIMENSIONS in inches D T D W T L E L CASE SIZE L W T D E ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± , , ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements) ENVIRONMENTAL TEST CONDITIONS LIMITS PER AEC-Q200 TYPICAL VISHAY PERFORMANCE Resistance Temperature Characteristic - 55 C to C ± 50 ppm/ C ± 35 ppm/ C Max. Ambient Temp. at Rated Wattage + 70 C + 70 C Max. Ambient Temp. at Power Derating C C High Temperature Storage R MIL-STD-202, 108, 1000 h at 125 C ± 0.1 % % Temperature Cycling R JESD22, JA-104, 1000 cycles, - 55 C to C ± 0.15 % % Moisture Resistance R MIL-STD-202, 106 ± 0.20 % % Biased Humidity R MIL-STD-202, 103, 1000 h at 85 C, 85 % RH, 10 % P ± 0.10 % % Life R MIL-STD-202, 108 at 125 C, 1000 h ± 0.1 % % Mechanical Shock R MIL-STD-202, method 213, condition C ± 0.1 % % Vibration R MIL-STD-202 method 204, 10 Hz to 2 khz ± 0.1 % % Resistance to Soldering Heat R MIL-STD-202, 204, condition B ± 0.10 % % Electrostatic Discharge R AEC-Q at 2 kv, human body ± 0.10 % % Solderability Visual J-STD-002, method B and B1 95 % Acceptable Terminal Strength R AEC-Q at 1 kg for 60 s ± 0.10 % % Flame Retardance Visual AEC-Q para 4.0 Acceptable DERATING CURVE 100 Percent of Rated Power Ambient Temperature C Revision: 25-Apr Document Number: 60024

105 PAT GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PAT1206E1002BST1 P A T E B S T 1 GLOBAL MODEL CASE SIZE PAT TCR CHARACTERISTIC E = ± 25 ppm/ C H = ± 50 ppm/ C K = ± 100 ppm/ C RESISTANCE TOLERANCE TERMINATION PACKAGING The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. Example: 10R0 = = = 10 k B = ± 0.1 % D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % J = ± 5.0 % S = Wraparound lead (Pb)-free solder w/nickel barrier TAPE AND REEL T1 = 1000 min., 1000 mult (1) TF = Full reel TS = 100 min., 1 mult (1) Preferred packaging code Revision: 25-Apr Document Number: 60024

106 PATT Precision Automotive High Temperature (155 C at full rated power) Thin Film Chip Resistor, AEC-Q200 Qualified The terminations consist of an adhesion layer, a leach resistant nickel barrier and gold plating compatible with high temperature solder systems. CONSTRUCTION Passivation T antalum Nitride Resistive Film Gold Nickel Barrier High Purity Alumina Substrate Adhesion Layer FEATURES Resistance range: 2.75 to 120 k AEC-Q200 qualified, table 7F AEC-Q200 qualified, ESD rated class 1C (2 kv) Laser trimmed to any value Intrinsic moisture protected resistor element Moisture resistant to MIL-STD-202, method 106 Tantalum nitride resistor film on alumina substrate 100 % visual inspected per MIL-PRF Laser-trimmed tolerances to ± 0.1 % Load life stability 0.2 % at 1000 h at 155 C and 100 % rated power Very low noise and voltage coefficient (< - 30 db, < 0.1 ppm/v) Sulfur resistant (per ASTM B humid vapor test) Material categorization: For definitions of compliance please see TYPICAL PERFORMANCE ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 2.75 to 120 k - TCR: Absolute ± 25 ppm/ C to ± 100 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 C Stability: Absolute ± 0.05 % 0.2 % at 1000 h at 155 C and 100 % rated power Stability: Ratio Not applicable - Voltage Coefficient Less than 0.1 ppm/v - Working Voltage 75 V - Operating Temperature Range - 55 C to C - Storage Temperature Range (1) - 55 C to C - Noise < - 30 db - Shelf Life Stability: Absolute 100 ppm 1 year at 25 C (1) Storage temperature rating is for device only. COMPONENT RATINGS CASE SIZE POWER RATING (mw) WORKING VOLTAGE (V) RESISTANCE RANGE ( ) to 120K Revision: 28-Aug Document Number: 60124

107 PATT DIMENSIONS in inches D T D W T L E L CASE SIZE L W T D E ± ± ± ± ± ENVIRONMENTAL TESTS ENVIRONMENTAL TEST CONDITIONS TYPICAL VISHAY PERFORMANCE High temperature storage MIL-STD-202 method 108, 1000 h at 125 C ± 0.05 % Temperature cycling JESD22 method JA-104, 1000 cycles, - 55 C to C ± % Moisture resistance MiIL-STD-202 method 106 ± % Biased humidity Life MIL-STD-202 method 103, 1000 h at 85 C, 85 % RH, 10 % rated power MIL-STD-202 method 108, 1000 h at 155 C ± % ± 0.20 % at 100 % rated power and 155 C. Effective film temperature is 200 C. Mechanical shock MIL-STD-202 method 213, condition C ± % Vibration MIL-STD-202 method 204, 10 Hz to 2 khz ± % Resistance to soldering heat MIL-STD-202 method 210, condition B ± 0.09 % Electrostatic discharge AEC-Q at 2 kv, human body ± 0.10 % at 2 kv Solderability MIL-STD-883 method 2003 para and J-STD-002 Pass Die shear MIL-PRF-55342,0.5 kg for 30 s Pass Flame retardance AEC-Q para 4.0 Pass MECHANICAL SPECIFICATIONS Resistive element Substrate material Terminations Tantalum nitride Alumina Gold (10 μin. min.) over nickel ( 50 μin. min.) DERATING CURVE 100 Percent of Rated Power Ambient Temperature C Revision: 28-Aug Document Number: 60124

108 PATT GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PATT0603E1002BST1 P A T T E B G T 1 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PATT 0603 E = ± 25 ppm/ C H = ± 50 ppm/ C K = ± 100 ppm/ C (1) L = ± 200 ppm/ C RESISTANCE TOLERANCE TERMINATION PACKAGING The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. B = ± 0.1 % D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % J = ± 5.0 % G = Wraparound gold over nickel barrier TAPE AND REEL T1 = 1000 min., 1000 mult (2) TF = Full reel TS = 100 min., 1 mult Example: 10R0 = = = 10 k s (1) Characteristic TCR - (R < 10 ) (2) Preferred packaging code RESISTANCE TCR (ppm/ C) TOLERANCE (%) 10 to 120 k 25, 50, 100, , 0.5, 1, 2, 5 5 to 10 (2) 100, 200 1, 2, to 5 (2) 200 1, 2, 5 (3) Resistance values from 2.75 to 10 are undergoing PPAP qualification; results are expected to be similar to PPAP qualified 10 to 120 k. Revision: 28-Aug Document Number: 60124

109 High Power Thin Film Wraparound Chip Resistor FEATURES High purity ceramic substrate Power rating to 2.5 W Resistance range 10 to 30.1 k Resistor tolerance to ± 0.1 % TCR to ± 25 ppm/ C Flame resistant UL 94 V-0 PHP PHP series chip resistors are designed with enlarged backside terminations to reduce the thermal resistance between the topside resistor layer and the solder joint on the end users circuit board. Actual power handling capability is limited by the end user mounting process. As with any high power chip resistor the ability to remove the generated heat is critical to the overall performance of the device. APPLICATIONS Power supplies Power switching Braking system Test and measurement equipment Motor deflection circuits TYPICAL PERFORMANCE ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Nichrome - Resistance Range 10 to 30.1 k - TCR: Absolute 25 ppm/ C, 50 ppm/ C (stdandard) and, 100 ppm/ C - 55 C to C Tolerance: Absolute 0.1 %, 0.5 %, 1.0 % and, 5.0 % + 25 C Power Rating: Resistor 1206: 1.0 W, 2512: 2.5 W (1) Maximum at + 70 C Stability: Absolute R 0.1 % 2000 h at + 70 C Stability: Ratio Not applicable - Voltage Coefficient < 0.1 ppm/v - Working Voltage 1206: 100 V, 2512: 200 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Shelf Life Stability: Absolute ± 0.01 % 1 year at + 25 C COMPONENT RATINGS CASE SIZE POWER RATING (mw) WORKING VOLTAGE (V) RESISTANCE RANGE ( ) (1) to 30.1K (1) to 30.1K (1) Dependent on component mounting by user ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF Requirements) ENVIRONMENTAL TEST LIMITS MIL-PRF CHARACTERISTIC E TYPICAL VISHAY PERFORMANCE Resistance Temperature Characteristic ± 25 ppm/ C ± 15 ppm/ C Maximum Ambient Temperature at Rated Wattage + 70 C + 70 C Maximum Ambient Temperature at Power Derating C C Thermal Shock ± 0.1 % ± 0.04 % Low Temperature Operation ± 0.1 % ± % Short Time Overload ± 0.1 % ± % High Temperature Exposure ± 0.1 % ± % Resistance to Soldering Heat ± 0.2 % ± % Moisture Resistance ± 0.2 % ± % Life at + 70 C for 2000 h ± 0.5 % ± % Revision: 11-Jun Document Number: 60076

110 PHP DIMENSIONS in inches D CASE SIZE LENGTH T WIDTH W (± 0.005) L THICKNESS MIN./MAX. TOP PAD D (± 0.005) BOTTOM PAD E (± 0.005) ± / / / / E W LAND PATTERN DIMENSIONS in inches PHP Land Pattern for 1206 Case Size PHP Land Pattern for 2512 Case Size STANDARD MATERIAL SPECIFICATIONS Resistive Element Nichrome Substrate Material Alumina (Al 2 O 3 ) Terminations (Tin/Lead) Tin/lead solder over nickel barrier Terminations (Lead (Pb)-free) Tin/silver/copper (Sn96.5Ag3.0Cu0.5) solder over nickel barrier PHP CHIP TEMP. VS. APPLIED POWER PHP CHIP TEMP. VS. APPLIED POWER Applied Power (W) Ω kω kω Applied Power (W) Ω kω kω Chip Surface Temperature ( C) Chip Surface Temperature ( C) s Chip surface temperature measured using FLIR A40 thermal imaging system with an approximate test card surface temperature of 25 C. Thermal imaging was conducted under ambient conditions resulting in a steady state test card surface temperature of 85 C over the full range of power levels. Thermal imaging and load life testing was conducted mounting one device to 2" x 3" test cards with 2.5 mil copper plating on both surfaces. Thermal vias on 120 mil centers were utilized for heat transfer between surfaces of the test card. s Chip surface temperature measured using FLIR A40 thermal imaging system with an approximate test card surface temperature of 25 C. Case Size Resistance Value Up to 10 Up to 10 k Up to 30 k Temperature Power (W) Revision: 11-Jun Document Number: 60076

111 PHP GLOBAL PART NUMBER INFORMATION P H P E B B T 1 GLOBAL MODEL SUBSTRATE CASE SIZE PHP 0 = Alumina TCR RESISTANCE TOLERANCE TERMINATION PACKAGING E = ± 25 ppm/ C H = ± 50 ppm/ C K = ± 100 ppm/ C The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. Example: 10R0 = = = 1 k B = ± 0.1 % D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % J = ± 5.0 % B =Wraparound Sn/Pb solder w/nickel barrier S = Wraparound lead (Pb)-free solder SAC-305 RoHS compliant - e1 BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult WI = WAFFLE (item single lot day code) 100 min., 1 mult TAPE AND REEL T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF =Full reel TS = 100 min., 1 mult TI = 100 min., 1 mult (item single lot date code) TP = 100 min., 1 mult (package unit single lot date) Revision: 11-Jun Document Number: 60076

112 Tape and Reel Specifications 8 mm, 12 mm, 16 mm and 24 mm Embossed Conductive Tape Conforming to EIA-481 Chip resistor quantities less than 1000 pieces are typically packaged in bulk or waffle packs unless specified at time of order entry. 8, 12, 16 AND 24 mm EMBOSSED TAPE DIMENSIONS K T D P 0 P2 10 pitches cumulative tolerance on tape ± 0.2 mm (± 0.008") E DIAGRAMS Top cover tape thickness (t 1 ) 0.10 mm (0.004") Max. Top cover tape A 0 See 1 F W Embossed carrier Embossment B 1 K 0 B 0 See 1 For machine reference only including draft and radii concentric around B mm (3.937") Embossment 1 mm (0.039") Max. P 1 User Direction of Feed Center lines of cavity D 1 For components 2.0 mm x 1.2 mm and larger 20 Bending radius See 2 Maximum component rotation R Min. 250 mm (9.843") 1 mm (0.039") Max. Tape Typical component cavity center line Typical component center line 8, 12, 16 AND 24 MM EMBOSSED TAPE DIMENSIONS in millimeters (inches) Constant Dimensions TAPE SIZE D E P 0 T (max.) A 0 B 0 K 0 P 2 8, / ± ± See note ± 0.05 TAPE SIZE B 1 (max.) D 1 (min.) F P 1 R (min.) see note 2 8 mm 1/2 Pitch 8 mm 12 mm 12 mm Double Pitch 4.55 (0.179) see requirements 8.20 (0.323) 16 mm (0.476) 24 mm (0.791) 1.00 (0.039) 1.50 (0.059) 1.50 (0.059) 3.50 ± 0.10 (0.138 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 7.50 ± 0.10 (0.295 ± 0.004) ± 0.10 (0.453 ± 0.004) 2.0 ± 0.10 (0.079 ± 0.004) see requirements 4.00 ± 0.10 (0.157 ± 0.004) 8.00 ± 0.10 (0.315 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 8.00 ± 0.10 (0.315 ± 0.004) ± 0.10 (0.472 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) to ± 0.10 (0.787 ± 0.004) in 4.00 (0.157) increments 25 (0.984) 30 (1.181) 30 (1.181) s (1) A0 B0 K0 are determined by component size. The clearance between the component and the cavity must be within 0.05 mm (0.002") min., to 0.50 mm (0.020") max. for 8 mm tape, and 0.05 mm (0.002") min. to 0.65 mm (0.026") max. for 12 mm tape. The component cannot rotate more than 20 within the determined cavity, see above diagram. (2) Tape and components shall pass around radius "R" without damage Revision: 20-Jul Document Number: K W A 0 B 0 K max. (0.098) 6.50 max. (0.256) see requirements 8.00 (0.315) ± 0.30 (0.472 ± 0.012) 8.00 (0.315) (0.642) (0.472) (0.957) See note 1 See note 1

113 Tape and Reel Specifications VISHAY THIN FILM (NIAGARA FALLS) STANDARD TAPE AND REEL SPECIFICATIONS CASE SIZE OR STYLE SIZE TAPE SIZE MAX. QTY./REEL s (1) Same tape as 0705/0805, part orientation will have termination on Bo side of pocket (2) Same tape as 1206, part orientation will have termination on Bo side of pocket (3) Same tape as 2512, part orientation will have termination on Bo side of pocket (4) M-1005 series 5000 pieces max. per reel LEADER LENGTH (MIN.) CAVITY SIZE REEL SIZE x 20 8 mm mm x " x 25 8 mm mm x " x 32 8 mm mm x " x 40 8 mm mm x " x 50 8 mm mm x " 0508 (1) 50 x 75 8 mm mm x " 0612 (2) 63 x mm mm x " 0705/ x 50 8 mm mm x " x 50 8 mm 4000 (4) 400 mm x " x mm mm x " x mm mm x " x 63 8 mm mm x " 1225 (3) 125 x mm mm x " x mm mm x " x mm mm x " x mm mm x " x mm mm x " STYLE TYPE DFN 8 PAD 4 mm SQ. 12 mm mm x " ORN HTRN 8 PIN SOIC 12 mm mm x " TOMC 16 PIN SOIC 24 mm mm x " MP SC70 8 mm mm x " MPM SOT-23 8 mm mm x " MPD SOT mm mm x " MPH 4 PIN LCC 12 mm mm x " TLCC/LCC 16 PIN LCC 16 mm mm x " TLCC/LCC 20 PIN LCC 16 mm mm x " WOMC 16/18/20 PIN SOIC 24 mm mm x " NOMC NOMCA 14 PIN SOIC 16 mm mm x " NOMC NOMCA 16 PIN SOIC 16 mm mm x " OSOP 20 PIN SSOP 16 mm mm x " SILNET STYLE TYPE VSO6 PIN SOIC 12 mm mm x " VSORC 20 PIN SOIC 24 mm mm x " VSOR2000S1 20 PIN SOIC 24 mm mm x " 16 PIN QSOP 12 mm mm x " VSSR 20 PIN QSOP 16 mm mm x " 24 PIN QSOP 16 mm mm x " VSSRC 20 PIN QSOP 16 mm mm x " 16 PIN TSSOP 24 mm mm x " VTSR 20 PIN TSSOP 24 mm mm x " 24 PIN TSSOP 24 mm mm x " VTSRC 20 PIN TSSOP 24 mm mm x " Revision: 20-Jul Document Number: 60034

114 Waffle Pack Packaging VISHAY THIN FILM (NIAGARA FALLS) STANDARD WAFFLE PACK SPECIFIED (2 inch x 2 inch) CASE SIZE SIZE OR STYLE NUMBER OF CELLS 0402 (40 x 20) (50 x 20) (50 x 40) (50 x 50) (60 x 30) (70 x 50) (100 x 50) (100 x 100) (126 x 63) (150 x 50) (225 x 75) (200 x 100) (250 x 125) 25 Revision: 21-Apr Document Number: 60087

115 Contents CTSP TSP VTF (Standard) Through Hole Networks Typical Resistor Network Applications VTF (Custom) TDP CS CSD HD HVPS M83401, C

116 CTSP Molded, Commercial, Single In-Line Thin Film Resistor, Through Hole Network (Custom) Designed to meet MIL-PRF characteristic V and H Military grade networks designed to meet MIL-PRF characteristics V and H available in 6 pins, 8 pins and 10 pins sizes in high and low profile. The molded style features a direct thermal compression bonded lead attachment in a rugged molded construction. FEATURES Lead (Pb)-free gold plated terminals standard Gold to gold terminations (no internal solder) Available Exceptional ratio stability over time and temperature ( R ± % 2000 h at 70 C) Available Rugged low profile molded case 6 pins, 8 pins, and 10 pins available Compatible with automatic insertion equipment Compliant to RoHS Directive 2002/95/EC * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TRACKING TC0 2 ABSOLUTE RATIO SCHEMATIC TOL Custom schematics available. Please consult factory. STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 6, 8, 10 - Resistance Range 20 to 500 k total - TCR: Absolute ± 10 ppm/ C to ± 25 ppm/ C - 55 C to C TCR: Tracking ± 2 ppm/ C (typical less 1 ppm/ C equal values) - 55 C to C Tolerance: Absolute ± 0.05 % to ± 0.5 % + 25 C Tolerance: Ratio ± % to 0.1 % + 25 C Power Rating: Resistor 100 mw (per element typical at + 25 C) Maximum at + 70 C Power Rating: Package 500 mw Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient < ppm/v - Working Voltage 100 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF < 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Tantalum Nitride film is custom, consult factory Revision: 01-Sep Document Number: 60036

117 CTSP DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION INCHES MILLIMETERS A Part Number Indicates Pin 1 Vishay Logo Date Code A B L E F H G B C ± non-accum ± 0.13 D ± typical 0.48 ± 0.15 E ± ± 0.25 F G H ± ± 0.10 C D L (6 Pins) ± ± 0.38 L (8 Pins) ± ± 0.38 L (10 Pins) ± ± 0.38 MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Molded Terminals Plating Model TSP - Lead (Pb)-free Standard Model TSPS - Lead (Pb)-free Solder Coated Option Model TSPL - Tin/Lead Solder Coated Option Tin/Lead and Lead (Pb)-free Finish Passivated nichrome or tantalum nitride Alumina Epoxy Copper alloy Nickel/gold Gold plated Sn63 Sn96.5, Ag3.0, Cu0.5 Hot solder dip ORDERING INFORMATION CHECK LIST (Customs) Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Resistance by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range MECHANICAL 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package 4. Specify if solder coated terminals are required For additional assistance refer to Vishay Thin Film s guide to understanding Thin Film precision. Resistor networks or application engineering. All standard products may be ordered directly from Vishay Thin Film. Revision: 01-Sep Document Number: 60036

118 CTSP GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TSP1xx-xxxUF T S P 1 x x - x x x U F T T S P L 1 x x - x x x U F S P S 1 x x - x x x - x U F GLOBAL MODEL (3 or 4 digits) TSP (Lead (Pb)-free) (e4) TSPL (Tin Lead) TSPS (Lead (Pb)-free) (e1) CUSTOM PART NUMBER (7 to 12 digits) 1xx-xxx 1xx-xxx-xxxx PACKAGING UF = TUBED Historical Part Number example: 1xx-xxx (for reference purposes only) 1xx-xxx CUSTOM PART NUMBER Revision: 01-Sep Document Number: 60036

119 TSP Molded, Commercial, Single In-Line Thin Film Resistor, Through Hole Network (Standard) Designed to meet MIL-PRF characteristic V and H These resistor networks are available in 6 pins, 8 pins and 10 pins styles in both standard and custom circuits. They incorporate s patented passivated nichrome film to give superior performance on temperature coefficient of resistance, thermal stability, noise, voltage coefficient, power handling and resistance stability. The leads are attached to the metallized alumina substrates by Thermo-Compression bonding. The body is molded thermoset plastic with gold plated copper alloy leads. This product will outperform all of the requirements of characteristic V and H of MIL-PRF SCHEMATIC Actual Size FEATURES Lead (Pb)-free gold plated terminals standard Gold to gold terminations (no internal solder) Available Exceptional ratio stability over time and temperature ( R ± % 2000 h at 70 C) Available Rugged low profile molded case 6 pins, 8 pins, and 10 pins available Compatible with automatic insertion equipment Material categorization: For definitions of compliance please see * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 2 ABSOLUTE RATIO TOL Schematic 01 Schematic 03 Schematic N N-1 N N STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 6, 8, 10 - Resistance Range 100 to 200 k per resistor - TCR: Absolute ± 25 ppm/ C (standard) - 55 C to C TCR: Tracking ± 2 ppm/ C (typical less 1 ppm/ C equal values) (1) - 55 C to C Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.05 % to ± 0.1 % to + 25 C Power Rating: Resistor W (per element typical at + 25 C) Maximum at + 70 C Power Rating: Package W Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v - Working Voltage 100 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF < 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C (1) Consult factory for TCR tracking specifications 01 schematic Revision: 15-Mar Document Number: 60037

120 TSP DIMENSIONS AND IMPRINTING in inches and millimeters Part Number Indicates Pin 1 Date Code Vishay Logo A B C CONSTRUCTION L D E F H G DIMENSION INCHES MILLIMETERS A B C ± non-accum ± 0.13 D ± typical 0.48 ± 0.15 E ± ± 0.25 F G H ± ± 0.10 L (6 Pins) ± ± 0.38 L (8 Pins) ± ± 0.38 L (10 Pins) ± ± 0.38 High Purity Alumina Substrate Sputtered TAMELOX Film System Gold to Gold Thermo-Compression Bond (No Internal Solder) Gold Plated Copper Leads MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Molded Terminals Plating Model TSP - Lead (Pb)-free Standard Model TSPS - Lead (Pb)-free Solder Coated Option Model TSPL - Tin/Lead Solder Coated Option Tin/Lead and Lead (Pb)-free Finish Passivated nichrome or tantalum nitride Alumina Epoxy Copper alloy Nickel/gold Gold plated Sn96.5, Ag3.0, Cu0.5 Sn63 Hot solder dip GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TSP BUF T S P B U F T S P S C U F GLOBAL MODEL (3 or 4 digits) TSP (Lead (Pb)-free) (e4) TSPL (Tin/lead) TSPS (Lead (Pb)-free) (e1) PIN COUNT (1 or 2 digits) SCHEMATICS 01 (1) = 5, 7 or 9 resistors with Pin 1 common 03 = 3, 4 or 5 isolated resistors 06 = 5, 7 or 9 series connected TCR CHARACTERISTICS R = ± 25 ppm/ C (2) H = ± 50 ppm/ C K = ± 100 ppm/ C (2) 01 Schematic greater than 250 only (1) Consult factory for TCR tracking specifications 01 schematic Historical Part Number example: TSP803R1001F (for reference purposes only) RESISTANCE First 3 digits are significant figures and the last digit specifies the number of zeroes to follow. e.g.: 1001 = 1K 1002 = 10K TOLERANCE AND RATIO TOLERANCE Absolute A = 0.1 % (3) B = 0.1 % C = 0.25 % D = 0.5 % F = 1.0 % Ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % PACKAGING UF = Tubed (3) Tol. available on 1K and up only. is reference resistor. TSP F SERIES PINS SCHEMATIC TCR CHARACTERISTIC RESISTANCE TOLERANCE AND RATIO TOLERANCE Revision: 15-Mar Document Number: 60037

121 VTF (Standard) Conformal, Single In-Line Thin Film Resistor, Through Hole Network (Standard) resistor networks are designed to be used in analog circuits in conjunction with operational amplifiers. Engineers can use these circuits to achieve an infinite number of very low noise and high stability circuits for industrial, medical and scientific instrumentation. This family of standard resistor networks will continually be expanded with new and innovative designs, and Vishay Dale Thin Film stocks most designs in house for off-the-shelf convenience. However, if you can not find the standard network you need, call applications engineering at (716) , as we may be able to meet your requirements with a semicustom match for a quick delivery. For standard networks with tighter specifications, or for custom networks, contact Applications Engineering at the above number. For a quick review of typical applications, request Vishay s guide to understanding and using thin film precision networks. SCHEMATIC = R 2 1 L = Total length = 0.320" (8.13 mm) max. H = Seated height = 0.280" (7.11 mm) max. Except PN 218 where seated height = 0.342" (8.69 mm) max. 2 R 2 3 Actual Size Actual Size FEATURES Off-the-shelf delivery Wide variety of standards Available Small size (SIP) Available Standard designs - no NRE Low capacitance < 0.1 pf/pin Flame resistant (UL 94 V-0 rating) Material categorization: For definitions of compliance please see * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. TYPICAL PERFORMANCE ABSOLUTE Complete electrical specifications at the end of schematics. TWO EQUAL RESISTORS ORDERING INFORMATION ( =) TRACKING TC0 2 ABSOLUTE RATIO TOL K: VTF209BX 50K: VTF214BX 2K: VTF210BX 100K: VTF215BX 5K: VTF211BX 200K: VTF216BX 10K: VTF212BX 500K: VTF217BX 20K: VTF213BX 1M: VTF218BX Lead (Pb)-free option add S after part number, e.g: VTF209SBX + R 2 = 10K, 100K, 1M + R 2 = 10 R 2 R 2 RATIO DIVIDE0:1 ORDERING INFORMATION ( + R 2 =) 9K + 1K = 10K: VTF280BX 90K + 10K = 100K: VTF193BX 900K + 100K = 1M: VTF281BX Actual Size Lead (Pb)-free option add S after part number, e.g: VTF280SBX L = Total length = 0.320" (8.13 mm) max. H = Seated height = 0.280" (7.11 mm) max. Except PN 281 where seated height = 0.362" (9.19 mm) max. Revision: 01-Mar Document Number: 60038

122 VTF (Standard) = 100K, 1M R 2 DIVIDER NETWORK 10:1 ORDERING INFORMATION ( =) = 10 R 2 100K: VTF282BX Actual Size L = Total length = 0.320" (8.13 mm) max. H = Seated height = 0.280" (7.11 mm) max. Except PN 283 where seated height = 0.362" (9.19 mm) max. 1M: VTF283BX = R L = Total length = 0.420" (10.67 mm) max. H = Seated height = 0.280" (7.11 mm) max. R Actual Size TWO EQUAL RESISTORS - ISOLATED ORDERING INFORMATION ( =) 1K: VTF365BX 50K: VTF1000BX 2K: VTF997BX 100K: VTF348BX 5K: VTF998BX 200K: VTF1105BX 10K: VTF363BX 500K: VTF1106BX 20K: VTF1104BX 1M: VTF1103BX 25K: VTF999BX Lead (Pb)-free option add S after part number, e.g: VTF209SBX RATIO DIVIDE0:1 AND 100:1 + R 2 + R 3 = 100K R 2 R 3 ORDERING INFORMATION (R1 + R2 + R3 =) + R 2 + R 3 = 100 R 3 + R 2 + R 3 = 10 R 2 + R K 9K 1K Actual Size 100K: VTF330BX Lead (Pb)-free option add S after part number, e.g: VTF330SBX L = Total length = 0.420" (10.67 mm) max. H = Seated height = 0.280" (7.11 mm) max. = R 2 = R 3 = R 4 = 10K, 100K R 2 R 3 R L = Total length = 0.520" (13.21 mm) max. H = Seated height = 0.280" (7.11 mm) max. Actual Size FOUR EQUAL RESISTORS ONE COMMON ORDERING INFORMATION ( =) 10K: VTF366BX 100K: VTF367BX Lead (Pb)-free option add S after part number, e.g: VTF366SBX = 10K R 2 = 1 R 2 R 3 DIVIDER NETWORK 2:1 ORDERING INFORMATION R 3 = x R 2 + R 2 10K 10K 5K L = (13.21 mm), H = (7.11 mm) max. Actual Size VTF1087BX Lead (Pb)-free option add S after part number, e.g: VTF1087SBX Revision: 01-Mar Document Number: 60038

123 VTF (Standard) = 10K R 2 R 3 DIVIDER NETWORK 2:1 ORDERING INFORMATION R 2 = 2 10K 20K 6.667K VTF1088BX R 3 = x R 2 + R Actual Size Lead (Pb)-free option add S after part number, e.g: VTF1088SBX L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max. = 10K R 2 R 3 DIVIDER NETWORK 5:1 ORDERING INFORMATION R 2 = 5 10K 50K 8.333K VTF1089BX R 3 = x R 2 + R Actual Size Lead (Pb)-free option add S after part number, e.g: VTF1089SBX L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max. = 10K R 2 = 10 R 3 = x R 2 + R 2 : R 2 TCR Tracking 3 ppm/ C R 2 R 3 10K 100K 9.09K L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max. Actual Size DIVIDER NETWORK 10:1 ORDERING INFORMATION VTF1090BX Lead (Pb)-free option add S after part number, e.g: VTF1090SBX = 5K, 10K, 100K, 1M = R 2 R 2 R L = Total length = 0.620" (15.75 mm) max. H = Seated height = 0.280" (7.11 mm) max. Except PN 287 seated height = 0.362" (9.19 mm) max. Actual Size DIVIDER NETWORK 1:1 ORDERING INFORMATION ( =) 5K: VTF225BX 10K: VTF286BX 100K: VTF219BX 1M: VTF287BX Lead (Pb)-free option add S after part number, e.g: VTF225SBX = 10K, 100K R 2 R 2 = 2 R 2 DIVIDER NETWORK 2:1 ORDERING INFORMATION ( =) 10K: VTF1009BX Actual Size L = Total length = 0.620" (15.75 mm) max. H = Seated height = 0.280" (7.11 mm) max. 100K: VTF1010BX Lead (Pb)-free option add S after part number, e.g: VTF1009SBX Revision: 01-Mar Document Number: 60038

124 VTF (Standard) = 10K, 100K DIVIDER NETWORK 5:1 ORDERING INFORMATION ( =) R 2 R 2 = 5 R 2 10K: VTF1007BX L = Total length = 0.620" (15.75 mm) max. H = Seated height = 0.280" (7.11 mm) max. Actual Size 100K: VTF1008BX Lead (Pb)-free option add S after part number, e.g: VTF1007SBX = 10K R 2 = 10 R 2 R 2 DIVIDER NETWORK 10:1 ORDERING INFORMATION ( =) 10K: VTF220BX L = Total length = 0.620" (15.75 mm) max. H = Seated height = 0.280" (7.11 mm) max. Actual Size Lead (Pb)-free option add S after part number, e.g: VTF220SBX = 10K, 100K, 1M = 10 R 2 1 R 2 R L = Total length = 0.620" (15.75 mm) max. H = Seated height = 0.280" (7.11 mm) max. Except PN 285 seated height = 0.320" (8.13 mm) max. Actual Size DIVIDER NETWORK 10:1 ORDERING INFORMATION ( =) 10K: VTF328BX 100K: VTF284BX 1M: VTF285BX Lead (Pb)-free option add S after part number, e.g: VTF328SBX = 10K, 50K, 200K, 1M = 20 R 2 1 R 2 R L = Total length = 0.620" (15.75 mm) max. H = Seated height = 0.280" (7.11 mm) max. Actual Size DIVIDER NETWORK 20:1 ORDERING INFORMATION ( =) 10K: VTF1073BX 50K: VTF1074BX 200K: VTF1107BX 1M: VTF1108BX Lead (Pb)-free option add S after part number, e.g: VTF1073SBX = 1M DIVIDER NETWORK 100:1 R 2 R 2 ORDERING INFORMATION ( =) = 100 R Actual Size 1M: VTF1109BX Lead (Pb)-free option add S after part number, e.g: VTF1109SBX Revision: 01-Mar Document Number: 60038

125 Common mode Division ratio 250, 100, 50 = R 3 = 1M R 2 = 4K, 10K, 20K R 4 = 3.984K, 9.901K, K R 5 = 900K, 950K, 975K R 6 = 100K, 50K, 25K SIX RESISTOR NETWORK VTF (Standard) (Designed for unity gain/high common mode voltage rejection differential amplifier) ORDERING INFORMATION ( /R 2 =) Devision Ratio = 250: VTF442BX 100: VTF443BX R 5 R 6 R 2 R 4 R 3 1M 1M 50: VTF444BX Lead (Pb)-free option add S after part number, e.g: VTF442SBX Actual Size L = Total length = 0.720" (18.29 mm) max. H = Seated height = 0.360" (9.14 mm) max. Maximum voltage to pins 3 and 7 is 300 V = 1K, 10K, 25K, 50K, 100K L = Total length = 0.820" (20.83 mm) max. H = Seated height = 0.280" (7.11 mm) max. Actual Size FOUR EQUAL RESISTORS ISOLATED ORDERING INFORMATION ( =) 1K: VTF329BX 2K: VTF1001BX 5K: VTF1002BX 10K: VTF158BX 25K: VTF1003BX 50K: VTF1004BX 100K: VTF288BX Lead (Pb)-free option add S after part number, e.g: VTF329SBX = 1K, 10K, 100K FOUR EQUAL RESISTORS ISOLATED ORDERING INFORMATION ( =) 1K: VTF1005BX 10K: VTF1006BX Actual Size 100K: VTF1137BX Absolute tolerance = 0.1 % Ratio tolerance = 0.1 % L = Total length = 0.820" (20.83 mm) max. H = Seated height = 0.280" (7.11 mm) max. Lead (Pb)-free option add S after part number, e.g: VTF1005SBX Revision: 01-Mar Document Number: 60038

126 VTF (Standard) EIGHT EQUAL RESISTORS ONE COMMON ORDERING INFORMATION ( =) 1 Actual Size = R 2 = R 3 = R 4 = R 5 = R 6 = R 7 = R 8 = 10K, 100K R 2 R 3 R 4 R 5 R 6 R 7 R K: VTF368BX 100K: VTF369BX Lead (Pb)-free option add S after part number, e.g: VTF368SBX L = Total length = 0.920" (23.37 mm) max. H = Seated height = 0.280" (7.11 mm) max. EIGHT RESISTOR NETWORK (Designed for instrument amplifier with shield driver) 1 Actual Size 10K 1K 9K 1K 1K 9K 1K 10K Ref ORDERING INFORMATION VTF272BX Lead (Pb)-free option add S after part number, e.g: VTF272SBX L = Total length = 0.920" (23.37 mm) max. H = Seated height = 0.280" (7.11 mm) max. R = 10K, 1K Actual Size R R R R R R R 2R 2R 2R 2R 2R 2R 2R 2R 2R EIGHT BIT R/2R LADDER NETWORK ORDERING INFORMATION (R =) (± 1/2 LSB) 10K: VTF1072BX 100K: VTF267BX Lead (Pb)-free option add S after part number, e.g: VTF1072SBX L = Total length = 1.020" (25.91 mm) max. H = Seated height = 0.280" (7.11 mm) max. = 1K Actual Size 1K 2K 4K 8K 16K 32K 64K 128K 256K R 2 R 3 R 4 R 5 R 6 R 7 R 8 R RESISTANCE DOUBLER ORDERING INFORMATION VTF1011BX Lead (Pb)-free option add S after part number, e.g: VTF1011SBX Absolute tolerance = ± 0.1 % Ratio tolerance = ± 0.1 % TCR tracking = ± 3 ppm/ C L = Total length = 1.02" (25.91 mm) max. H = Seated height = 0.280" (7.11 mm) max. Revision: 01-Mar Document Number: 60038

127 VTF (Standard) STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 3 to 10 - Resistance Range 100 to 2 M total - TCR: Absolute ± 10 ppm/ C (1) 0 C to + 70 C TCR: Tracking ± 2 ppm/ C (1) 0 C to + 70 C Tolerance: Absolute ± 0.1 % + 25 C Tolerance: Ratio ± 0.02 % + 25 C Power Rating: Resistor 100 mw - Power Rating: Package 500 mw - Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient ± 0.01 ppm/v - Working Voltage 100 V - Operating Temperature Range 0 C to + 70 C - Storage Temperature Range - 55 C to C - Noise < - 35 db - Thermal EMF < 0.1 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C (1) TCR over - 55 C to C ± 20 ppm/ C absolute, ± 3 ppm/ C tracking DIMENSIONS AND IMPRINTING in inches and millimeters Part Number Date Code E DIMENSION INCHES MILLIMETERS Pin 1 A min Vishay Logo B H A B min C typ. D typ ± 0.15 C D E max L F F typ L and H (length and height) dimensions for each model are found alongside the schematic drawing MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Tin/Lead Option Lead (Pb)-free Option Tin/Lead and Lead (Pb)-free Finish Passivated nichrome Alumina Epoxy coated Copper alloy Sn60 - Sn63 Sn96.5, Ag3.0, Cu0.5 Hot solder dip Revision: 01-Mar Document Number: 60038

128 VTF (Standard) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTF211BX V T F B X V T F S B X GLOBAL MODEL PART NUMBER (3 or 4 digits) LEAD (Pb)-FREE (0 or 1 digits) PACKAGING VTF xxx or xxxx Example: S = Lead (Pb)-free (e1) None = Tin lead BX = Conductive foam box Historical Part Number example: VTF 211 (for reference purposes only) VTF 211 MODEL PART NUMBER Revision: 01-Mar Document Number: 60038

129 Typical Resistor Network Applications Applications The following are circuit diagrams of operational amplifiers and their use of standard resistor networks. These diagrams are supplied to illustrate typical resistor network applications using Vishay Thin Film s standard precision, low noise, stable resistor networks. CIRCUIT DIAGRAMS Inverting Amplifier with I OFF Compensation R 2 Non Inverting Amplifier R 2 V in + A + V in + + V out V out R 3 V 0 A = = V in R 2 x R 2 R 3 = R 2 For A = 1 Use VTF1087 For A = 2 Use VTF1088 For A = 5 Use VTF1089 For A = 10 Use VTF1090 Inverting Amplifier R 2 V For A = 10 Use VTF193, 280 and R A R 2 = = For A = 2 Use VTF209 thru 218 V in R 2 For A = 11 Use VTF282 or 283 Differential Input Amplifier R 2 V in + + V out V 0 V in V in A = = R 2 Power Supply Voltage Splitter V in R V out For A = 1 Use VTF209 thru 218 For A = 10 Use VTF282 thru /2 V in Ø R 2 For A = 20 A = R = 10K Use VTF = 50K Use VTF1074 For A = 10 = 10K Use VTF328 = 100K Use VTF284 = 1M Use VTF285 For A = 5 = 10K Use VTF1007 = 100K Use VTF1008 For A = 2 = 10K Use VTF1009 = 100K Use VTF1010 For A = 1 = 5K Use VTF225 = 10K Use VTF286 = 100K Use VTF219 = 1M Use VTF287 Two Operational Instrumentation Amplifier R 2 R 2-1/2 V in = R 2 = 50K Use VTF214 = 100K Use VTF215 = 200K Use VTF216 = 500K Use VTF217 = 1M Use VTF218 V in + GAIN at = 10 R R 2 = 10K Use VTF280 = 100K Use VTF193 = 1M Use VTF281 + V out Revision: 08-Dec Document Number: 60039

130 Applications CIRCUIT DIAGRAMS Current Driver R 3 High Common Mode Voltage Rejection Unity Gain Differential Amplifier V in + + R 5 I out R 2 R 4 R Load Load I out = V in + R 2 R 5 For R 3 + R 4 + R 5 at + R 2 I out at V in Max I L R 5 V 0 MAX = R 5 + R L For = R 2 = R 3 = R 4 = R 1 1 I out at V in R and R 5 If R is large then I out at V in R 5 For, R 2, R 3, R 4 100K Use VTF219 1 M Use VTF287 OP-AMP must be able to carry the desired output current. Instrumentation Amplifier with Guard Driver Optional External CMVRR Trim R T = 2R 6 CMVRR = 250 Use VTF442 = 100 Use VTF443 = 50 Use VTF444 R 6 = 1M Use VTF442 = 1M Use VTF443 = 1M Use VTF444 With optional adjustment (RT) over 120 db, common mode voltage rejection is possible. Adder - Substractor + R 5 R R 6 R T V out R 3 R 4 + 9K R 3 1K R 4 10K R = CMV Rejection Ratio = CMVRR = R 3 = 1 M R 8 V in GUARD GUARD R 2 1K R 2 1K + + V out V 1 V 2 V 3 V 4 R 2 R 3 R 4 + V 0 R 4 A = = 100 R 3 R 2 + 9K R 3 1K Use VTF272 OP-AMP references AD713, LTC1058, RMAX479 R 4 10K V 5 V 6 R 5 R 6 R 7 If thru R 6 = R and R 7 = R 8 = then V 0 = V + V 2 + V 3 V 4 V 5 V 6 thru R 4 = 10K Use VTF366 thru R 4 = 100K Use VTF367 s (1) Unused source inputs must be grounded (2) Circuit assumes the source impedance of all voltage sources are buffered or low (impedance adds to input resistors) Revision: 08-Dec Document Number: 60039

131 Applications CIRCUIT DIAGRAMS Non Inverting Two Input Adder Two Input Adder C 1 V 1 R 2 R 4 V 2 V 3 R 3 e x e y + V 0 V 1 R 3 V 2 R C 4 2 e x e y A + R 2 V0 V V = 0 R 2 V 3 R 3 V 0 R 4 If = R 2 = R 3 then R V 1 + V 2 + V 3 = V R 0 R 4 4 A GAIN = R thru R 4 = 10K thru R 4 = 100K Use VTF366 Use VTF367 Potential at two inputs of OP-AMP are always equal. e x = e y Three Adder Buffer Input Non Inverting C 1 Always two inputs of OP-AMP at same potential e x = e y V 1 e y R 3 V 2 e y R 4 V 0 = 0 e x = = e + R y 2 2V 0 R If R 3 = Ry the V 1 + V 2 = 2e y = R 2 If we make = R 2 then V 1 + V 2 = V 0 VTF215, 216, 218 or 218 If we make = R 2 then V 1 + V 2 = VTF193 or s (1) Circuit assumes the source impedance is very low or incorporated in and R 2 (2) Unused inputs should be grounded otherwise equations will not hold true R (3) 3 R 4 C 1 and C 2 should be chosen R 2 C 2 = C R 3 + R 2 4 Four Input Adder R 2 V 0 V 1 V 2 R 3 R 2 + V 0 V 1 V 2 R 3 e x e y + C 1 V 0 e x e y V 3 R 4 R 5 R 6 C 2 V 3 R 4 R 5 V 0 e x = R 2 V 4 R 6 C 2 Networks for and R 2 use VTF212, 213 or 215 For R 3, R 4, R 5 and R 6 use VTF366 or 367 where R 3 = R 4 = R 5 = R 6 Capacitor values should be determined for desired cut off 1 frequency and R 2 C 1 = -- R. 4 3 C 2 For amplifier use AD713, LT1058 or RMAX479 these contain all four OP-AMP in one package. For best results all unused inputs should be grounded. These diagrams are supplied to illustrate typical resistor network applications. Vishay assumes no responsibility for specific use of performance. V 1 e x R 3 V 2 e x R 4 V 3 e x R 5 If R 3 = R 4 = R 5 = R 6 then V 4 e x R V 0 V 1 + V 2 + V 3 + V 4 = 4e x = R 2 If we use VTF280 for + R 2 and VTF367 for R 3, R 4, R 5 and R 6 then 4V 0 V V 1 V 2 V 3 V = = or A = or for, R 2 use VTF212 4V 0 V 1 + V 2 + V 3 + V 4 = = 2V 2 0 or A = 0.5 s (1) Unused source inputs must be grounded (2) Circuit assumes the source impedance of all voltage sources are buffered or low (impedance adds to input resistors) Revision: 08-Dec Document Number: 60039

132 VTF (Custom) Conformal, Single In-Line Thin Film Resistor, Through Hole Network (Custom) Wirewound or metal film performance in a space saving package. SIP networks available in 3 pins to 10 pins sizes can obtain important performance parameters in an economical, mass producible style. SIPs take up the least amount of board space and are the easiest possible configuration to hand-insert into printed circuit boards. Standard pin centers are 0.100". Passivation coatings plus a conformal coating of epoxy protect the active element from the outside environment. FEATURES Minimal PC board space Standard 100 mil centers Available Exceptional ratio stability over time and temperature ( R ± % at + 70 C at 2000 h) Available Integrated construction Conformal coating flame resistant (UL 94 V-0 rating) Compliant to RoHS Directive 2002/95/EC * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TRACKING TC0 2 ABSOLUTE RATIO TOL SCHEMATIC Custom schematics available. Please consult factory. STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 3 to 10 - Resistance Range 100 to 2 M total - TCR: Absolute ± 10 ppm/ C to ± 25 ppm/ C - 55 C to C TCR: Tracking ± 2 ppm/ C to ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.05 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.01 % to ± 0.5 % + 25 C Power Rating: Resistor W (per element) Maximum at + 70 C Power Rating: Package - Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v - Working Voltage 100 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF < 0.10 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 02-Sep Document Number: 60041

133 VTF (Custom) DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION INCHES MILLIMETERS A typ typ. A Pin 1 B Vishay Logo L Max. Part Number (1) H dimension, R-value and schematic dependent C Date Code H Max. D E F B typ typ. C ± ± 0.08 D min min. E max max. F typ typ. L (3 Pins) L (4 Pins) L (5 Pins) L (6 Pins) L (7 Pins) L (8 Pins) L (9 Pins) L (10 Pins) H (3 Pins) H (4 Pins) H (5 Pins) H (6 Pins) H (7 Pins) H (8 Pins) H (9 Pins) H (10 Pins) (1) 7 (1) MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Tin/Lead Option Lead (Pb)-free Option Tin/Lead and Lead (Pb)-free Finish Passivated nichrome Alumina Epoxy coated Copper alloy Sn60 - Sn63 Sn96.5, Ag3.0, Cu0.5 Hot solder dip ORDERING INFORMATION CHECK LIST (Customs) Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Resistance by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range MECHANICAL 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package 4. Specify if lead (Pb)-free For additional assistance refer to Vishay Thin Film s guide to understanding Thin Film precision. Resistor networks or application engineering. All standard products may be ordered directly from Vishay Thin Film. Revision: 02-Sep Document Number: 60041

134 VTF (Custom) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTF211BX V T F B X V T F S B X GLOBAL MODEL PART NUMBER (3 or 4 digits) LEAD (Pb)-FREE (0 or 1 digits) PACKAGING VTF xxx or xxxx Example: S = Lead (Pb)-free (e1) None = Tin lead BX = Conductive foam box Historical Part Number example: VTF Custom 211 (for reference purposes only) VTF Custom 211 MODEL PART NUMBER Revision: 02-Sep Document Number: 60041

135 Decade Divider, Single In-Line, Thin Film Divider, Through Hole Resistor Network Precision resistor networks comprised of series-connected decade values are provided in single-in-line style with edgemounted leads on 100 mil centers. Integrated thin film construction, laser-trimmed to extremely tight tolerances, insures exceptionally close tracking over temperature and throughout operating life, in either voltage division or current monitoring mode. Voltage coefficient and noise are extremely low. Designers gain several advantages over the use of discrete resistor sets, including smaller size, better overall tracking, greater reliability, and lower cost. FEATURES Tight ratio tolerance (0.01 %) 5 decade ratio divider Available High voltage capability (300 V) Available Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC definition * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL SCHEMATIC K 90K 900K Style STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 6 - Resistance Range 100 to 1 M total - TCR: Absolute ± 25 ppm/ C 0 C to + 70 C TCR: Tracking ± 5 ppm/ C 0 C to + 70 C Tolerance: Absolute ± 0.1 % + 25 C Tolerance: Ratio ± 0.01 % to ± 0.1 % + 25 C Power Rating: Resistor W Maximum at + 70 C Power Rating: Package W Maximum at + 70 C Stability: Absolute 1000 ppm 2000 h at + 70 C Stability: Ratio 200 ppm 2000 h at + 70 C Voltage Coefficient 0.1 ppm/v - Working Voltage 300 V - Operating Temperature Range 0 C to + 70 C - Storage Temperature Range - 55 C to C - Noise - 20 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 04-Jan Document Number: 60044

136 DIMENSIONS AND IMPRINTING in inches and millimeters E A Vishay Logo Pin 1 Ident. F B Date Code G C D DIMENSION INCHES MILLIMETERS A max B max C max D min E typ F typ G 0.1 (5 x) typ PART NUMBE T 267-Q 267-A 267-B Ratio Tolerance (1) 0.01 % % 0.05 % 0.1 % Voltage Rating 300 V Noise Index < - 30 db (1) Excluding the 100 R1 + R2 + R3 + R4 RT R1 + R2 + R3 RT = 100 kω 1 MΩ = 0.1 = 10 kω 1 MΩ = K 90K 900K R1 + R2 RT 1 kω = = MΩ R1 = 100 Ω ± 0.1 % MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Marking Resistance to Solvents Tin/Lead Option Lead (Pb)-free Option Tin/Lead and Lead (Pb)-free Finish Passivated nichrome Alumina Conformal coated Copper alloy Per MIL-PRF Sn60 - Sn63 Sn96.5, Ag3.0, Cu0.5 Hot solder dip GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTF TUF V T F T B X V T F S T B X SERIES MODEL (10 or 11 digits) VTF (Tin lead) VTF100S-267 (Lead (Pb)-free) (e1) TOLERANCE (1 digit) T = 0.01 % ratio Q = % ratio A = 0.05 % ratio B = 0.1 % ratio PACKAGING (2 digits) BX = Boxed Historical Part Number example: Q (for reference purposes only) Q SERIES MODEL TOLERANCE Revision: 04-Jan Document Number: 60044

137 TDP Molded, Dual-In-Line Thin Film Resistor, Through Hole Network offers two standard circuits in a 14 pins and 16 pins molded dual-in-line over a 100 to 100 k resistance range. The networks feature ratio tolerance to 0.05 % with a TCR tracking of 5 ppm/ C. SCHEMATIC Schematic TDP01 Actual Size FEATURES Standard rugged, molded case construction (14 pins and 16 pins) Highly stable thin film Available (500 ppm at + 70 C at 2000 h) Available Low temperature coefficient (± 25 ppm/ C) Compatible with automatic insertion equipment Standard isolated pin one common schematic Isolated and bussed schematics Material categorization: For definitions of compliance please see * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL Schematic TDP03 Pin 1 TDP-1401 TDP-1601 Models: TDP1401 and TDP or 15 resistors with one pin common Models: TDP1403 and TDP or 8 isolated resistors TDP-1403 TDP-1603 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 14, 16 - Resistance Range 100 to 100 k - TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % + 25 C Tolerance: Ratio ± 0.05 % to ± 0.5 % + 25 C Power Rating: Resistor 0.05 W/resistor = 01 circuit 0.10 W/resistor = 03 circuit at + 25 C Power Rating: Package 0.8 W/package Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient < 1 ppm/v (typical) - Working Voltage 100 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 08-Jan Document Number: Pin 1

138 TDP DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION INCHES MILLIMETERS Part A A B B TDP14XX C Pin 1 Vishay Logo Date Code D E H F G J K G F L H C E J D K M L M A A Part B B TDP16XX C Pin 1 Vishay Logo Date Code D E F G J H K G H C F L J D E K L M M Revision: 08-Jan Document Number: 60045

139 TDP MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Tin/Lead Option Lead (Pb)-free Option Tin/Lead and Lead (Pb)-free Finish Passivated nichrome Alumina Conformal coated Copper alloy Sn % matte tin Hot solder dip GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TDP BUF T D P B U F T D P T A U F GLOBAL MODEL (3 or 4 digits) TDP (Tin lead) TDPT (Lead (Pb)-free) (e3) PINS SCHEMATICS RESISTANCE = 13 or 15 resistors with 1 common pin 03 = 7 or 8 isolated resistors First 3 digits are significant figures and the last digit specifies the number of zeroes to follow. e.g.: 1001 = 1K 1002 = 10K TOLERANCE AND RATIO TOLERANCE Absolute A = ± 0.1 % (1) B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % Ratio ± 0.05 % ± 0.1 % ± 0.1 % ± 0.1 % ± 0.5 % PACKAGING UF = Tubed Historical Part Number example: TDP F (for reference purposes only) TDP F SERIES PINS SCHEMATIC RESISTANCE TOLERANCE AND RATIO TOLERANCE Revision: 08-Jan Document Number: 60045

140 CS Ceramic Sandwich, Single-In-Line Thin Film Resistor, Through Hole Network (Low Profile 0.20 Custom) Actual Size presents a design concept in precision thin film resistor networks. The essence of this new concept is the marriage of two principle design elements... a unique resistive film, having electrical properties comparable to those of wire-wound resistors, and a rugged, low cost, ceramic package and an almost limitless variety of sizes and configurations. FEATURES Gold-to-gold terminations. External leads are attached directly to gold pads on the ceramic substrate by thermo-compression bonding (no Available internal solder) Available Low profile (0.200 min.) Custom pin-outs available Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC definition * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 2 ABSOLUTE RATIO TOL SCHEMATIC Custom schematics available. Please consult factory. STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome Tantalum nitride - Pin/Lead Number 3 to 10 - Resistance Range 20 to 2000 k (total) 20 to 500 k (total) - TCR: Absolute ± 10 ppm/ C to ± 25 ppm/ C ± 50 ppm/ C to ± 100 ppm/ C - 55 C to C TCR: Tracking ± 2 ppm/ C ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.05 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.01 % to ± 0.5 % ± 0.02 % to ± 0.5 % + 25 C Power Rating: Resistor 100 mw (per element) Typical at + 25 C Power Rating: Package - - Stability: Absolute R ± 0.05 % R ± 0.1 % 2000 h at + 70 C Stability: Ratio R ± % R ± 0.02 % 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v < 0.1 ppm/v - Working Voltage 100 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF < 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C Revision: 20-Oct Document Number: 60081

141 CS DIMENSIONS AND IMPRINTING in inches and millimeters Pin 1 A Vishay Logo L Max. B Part Number H C Date Code DIMENSION INCHES MILLIMETERS A typ. (1) 2.54 typ. B ± typ ± 0.05 typ. C min min. D max max. E L (3 Pins) L (4 Pins) L (5 Pins) L (6 Pins) L (7 Pins) L (8 Pins) L (9 Pins) L (10 Pins) H (3 Pins) H (4 Pins) H (5 Pins) H (6 Pins) H (7 Pins) H (8 Pins) H (9 Pins) H (10 Pins) (2) 7.11 (2) s (1) Non-accum. (2) Resistance value and schematic dependent. By occupying more than one inch square, higher values are available. MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Plating Tin/Lead Option Lead (Pb)-free Option Tin/Lead and Lead (Pb)-free Finish Passivated nichrome or tantalum nitride Alumina Ceramic Copper alloy Gold Sn63 Sn96.5, Ag3.0, Cu0.5 Hot solder dip ORDERING INFORMATION CHECK LIST Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Resistance by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range MECHANICAL 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package 4. Specify if lead (Pb)-free For additional assistance refer to s guide to understanding Thin Film precision. Resistor networks or application engineering. All standard products may be ordered directly from. Revision: 20-Oct Document Number: 60081

142 CS GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CS1xx-xxxBX C S 1 x x - x x x B X C S 1 x x - x x x - x B X GLOBAL MODEL (2 or 3 digits) CS CUSTOM PART NUMBER (7 or 9 digits) 1xx-xxx or 1xx-xxx-x PACKAGING BX = Boxed Historical Part Number example: 1xx-xxx (for reference purposes only) 1xx-xxx CUSTOM PART NUMBER Revision: 20-Oct Document Number: 60081

143 CSD Ceramic Sandwich, Dual-In-Line Thin Film Resistor, Through Hole Network (Custom) A dual-in-line monolithic ceramic package in a variety of sizes and configurations. A rugged, low cost packaging technique with 4 leads to 20 leads that allows higher resistance integration than chip and wire ceramic packages. SCHEMATIC FEATURES Gold-to-gold terminations. External leads are attached directly to gold pads on the ceramic substrate by thermo-compression bonding (no Available internal solder) Available Monolithc construction Ceramic package with no cavity. 4 pins to 20 pins. Flexibility of lead variations to save PC board space Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC definition * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TRACKING TC0 2 ABSOLUTE RATIO TOL Custom schematics available. Please consult factory STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome Tantalum nitride (1) - Pin/Lead Number 4 to 20 - Resistance Range 100 to 5 M total - TCR: Absolute ± 10 ppm/ C ± 25 ppm/ C to ± 100 ppm/ C - 55 C to C TCR: Tracking ± 2 ppm/ C ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.01 % to ± 0.1 % + 25 C Power Rating: Resistor 100 mw (per element (typical)) Maximum at + 70 C Power Rating: Package 500 mw Maximum at + 70 C Stability: Absolute 1000 ppm 2000 h at + 70 C Stability: Ratio 300 ppm 2000 h at + 70 C Voltage Coefficient 0.1 ppm/v - Working Voltage 100 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF < 0.1 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C (1) Tantalum nitride film is custom Revision: 20-Oct Document Number: 60046

144 CSD DIMENSIONS AND IMPRINTING in inches and millimeters C H Part Number Pin 1 G D A Vishay Logo XXXX XX B L Date Code I Non-cumulative J E F DIMENSION INCHES MILLIMETERS A max B C typical 4.06 D E F min G H I J L (4 Pins) L (6 Pins) L (8 Pins) L (10 Pins) L (12 Pins) L (14 Pins) L (16 Pins) L (18 Pins) L (20 Pins) MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Plating Tin/Lead Option Lead (Pb)-free Option Tin/Lead and Lead (Pb)-free Finish Passivated nichrome or tantalum nitride Alumina Ceramic Copper alloy Gold Sn63 Sn96.5, Ag3.0, Cu0.5 Hot solder dip ORDERING INFORMATION CHECK LIST Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL MECHANICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Resistance by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range For additional assistance refer to s guide to understanding Thin Film precision. Resistor networks or application engineering. All standard products may be ordered directly from. 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package 4. Specify if lead (Pb)-free Revision: 20-Oct Document Number: 60046

145 CSD GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CSD1xx-xxxUF C S D 1 x x - x x x U F C S D 1 x x - x x x - x U F GLOBAL MODEL (2 or 3 digits) CSD CUSTOM PART NUMBER (7 or 9 digits) 1xx-xxx or 1xx-xxx-x PACKAGING UF = Tubed Historical Part Number example: 1xx-xxx (for reference purposes only) 1xx-xxx CUSTOM PART NUMBER Revision: 20-Oct Document Number: 60046

146 Hermetic, Dual-In-Line Thin Film Resistor, Through Hole Network (Custom) HD Designed to meet or exceed MIL-PRF characteristic C The most advanced thin film technology is put to work in the manufacture of exceptionally stable, precision thin film resistor networks in a variety of popular hermetic-type packages. These networks are based on the utilization of a resistive film possessing outstanding stability throughout board assembly and equipment life. Manufacturing is performed under rigid process control by a team of specialists having many years experience in the design, fabrication and automatic laser adjustment of several hundred different precision thin film resistor networks. Circuits are designed for specific customer requirements and manufactured according to highly standardized procedures. Testing is conducted in one of the most completely equipped laboratories in the industry. SCHEMATIC FEATURES True hermetic construction Standard 8 pins, 14 pins, 16 pins, 18 pins, Available 20 pins packages Chip and wire construction Available Exceptional stability over time and temperature (500 ppm at + 70 C at 2000 h) Military/aerospace Hermetically sealed Ideal for military/aerospace applications Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC definition * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TRACKING TC0 2 ABSOLUTE RATIO TOL Custom schematics available. Please consult factory. STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome Tantalum nitride (1) - Pin/Lead Number 8 to 20 - Resistance Range 50 to 1500 k (total) 50 to 300 k (total) - TCR: Absolute ± 10 ppm/ C to ± 25 ppm/ C - 55 C to C TCR: Tracking ± 2 ppm/ C (typical less 1 ppm/ C equal values) - 55 C to C Tolerance: Absolute ± 0.02 % to ± 1.0 % + 25 C Tolerance: Ratio ± 0.01 % to ± 0.5 % + 25 C Power Rating: Resistor 100 mw (per element (typical)) + 25 C Power Rating: Package - - Stability: Absolute 500 ppm 2000 h at + 70 C Stability: Ratio 150 ppm 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v - Working Voltage 100 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF < 0.10 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C (1) Tantalum nitride film is custom Revision: 20-Oct Document Number: 60047

147 HD DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION INCHES MILLIMETERS A L max. B ± ± 0.25 C ± ± 0.25 Part Number D non-accum A B E ± ± 0.05 Pin 1 Ident. F typical 3.30 Vishay Logo Date Code H G max H typical 7.62 G I typical 0.25 C L (8 Pins) F I L (14 Pins) D E L (16 Pins) L (18 Pins) L (20 Pins) MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Tin/Lead Option Lead (Pb)-free Option Tin/Lead and Lead (Pb)-free Finish Passivated nichrome or tantalum nitride Alumina Ceramic Copper alloy Sn63 Sn96.5, Ag3.0, Cu0.5 Hot solder dip ORDERING INFORMATION CHECK LIST Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Resistance by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range MECHANICAL 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package 4. Specify if lead (Pb)-free For additional assistance refer to s guide to understanding Thin Film precision. Resistor networks or application engineering. All standard products may be ordered directly from. Revision: 20-Oct Document Number: 60047

148 HD GLOBAL PART NUMBER INFORMATION New Global Part Numbering: HD1xx-xxxUF H D 1 x x - x x x U F H D 1 x x - x x x - x U F GLOBAL MODEL (2 or 3 digits) HD CUSTOM PART NUMBER (7 or 9 digits) 1xx-xxx or 1xx-xxx-x PACKAGING UF = Boxed Historical Part Number example: 1xx-xxx (for reference purposes only) 1xx-xxx CUSTOM PART NUMBER Revision: 20-Oct Document Number: 60047

149 HVPS High Value Precision SIP Thin Film Resistor, Through Hole Network SCHEMATIC FEATURES High nominal precision resistors (value range 50K to 10M) Available Highly accurate resistance tolerance (up to ± 0.01 %) Available Conformal coating flame resistant (UL 94 V-0) rating Ultra low TCR (± 5 ppm/ C) High voltage Flame resistant (UL 94 V-0 rating) High voltage rating to 300 V Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC definition * Pb containing terminations are not RoHS compliant, exemptions may apply 1 2 APPLICATIONS Precise instrumentation (medical, test etc.) Precision amplifiers STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number to 5000 k (HVPS1) Resistance Range to k (HVPS2) - TCR: Absolute 5 ppm/ C to 25 ppm/ C - 55 C to C TCR: Tracking - - Tolerance: Absolute ± 0.01 % to ± 1.0 % Maximum at + 70 C Tolerance: Ratio - - Power Rating: Resistor 125 mw (HVPS1) 250 mw (HVPS2) - Power Rating: Package - - Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio - - Voltage Coefficient < 1.0 ppm/v - Working Voltage 250 V (HVPS1) 300 V (HVPS2) - Operating Temperature Range - 55 C to C - Storage Temperature Range - - Noise < - 30 db - Thermal EMF < 0.1 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio - - Revision: 20-Oct Document Number: 60091

150 HVPS DIMENSIONS AND IMPRINTING in inches (millimeters) max. (6.096) HVPS max. (2.794) max. (8.128) HVPS max. (2.794) PART NO: PART NO: DATECODE max. (6.604) DATECODE max. (6.604) 0.02 ± (0.508 ± 0.127) min. (3.175) (0.25) 0.02 ± (0.508 ± 0.127) min. (3.175) (0.25) typ. (2.54) typ. (5.08) MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Tin/Lead Option Lead (Pb)-free Option Tin/Lead and Lead (Pb)-free Finish Passivated nichrome Alumina Epoxy coated Copper alloy Sn60 - Sn63 Sn96.5, Ag3.0, Cu0.5 Hot solder dip GLOBAL PART NUMBER INFORMATION New Global Part Numbering: HVPS1E1003QBX H V P S 1 E Q B X H V P S 2 S Y T B X GLOBAL MODEL (3 or 4 digits) HVPS1 HVPS2 (Tin lead) HVPS1S HVPS2S (Lead (Pb)-free) (e1) TCR RESISTANCE TOLERANCE PACKAGING E = 25 ppm/ C D = 15 ppm/ C Y = 10 ppm/ C Z = 5 ppm/ C First 3 digits are significant figures. Last digit specifies the number of zeroes to follow. e.g.: 1001 = 1K 1002 = 10K 1005 = 10M A = 0.05 % B = 0.1 % D = 0.5 % F = 1.0 % Q = 0.02 % T = 0.01 % BX = Conductive foam box Historical Part Number example: HVPS1E5004B (for reference purposes only) HVPS1 E 5004 B SERIES TCR CHARACTERISTICS RESISTANCE TOLERANCE Revision: 20-Oct Document Number: 60091

151 M83401, C83401 Thin Film Resistor Network Military, MIL-PRF Qualified, Type RZ070, RZ080, RZ090, RZ210, RZ220, RZ230, Single-In-Line SIP Qualified to meet MIL-PRF characteristic R, V, and H These resistor networks are available in 6 pins, 8 pins, and 10 pins in schematic C and G styles. Custom circuits are not available. Schematic C and G only. They incorporate Vishay Dale Thin Film s patented passivated nichrome film to give superior performance on temperature coefficient of resistance, thermal stability, noise, voltage coefficient, power handling and resistance stability. The leads are attached to the metallized alumina substrates by Thermo-Compression bonding. The body is molded thermoset plastic with gold plated copper alloy leads. This product will outperform all of the requirements of characteristic R, V, and H of MIL-PRF SCHEMATIC C Schematic (Pin 1 Common) FEATURES MIL-PRF qualified (cage code 57489) Low Profile 0.195" (4.95 mm seated height) Characteristics R (± 25 ppm), H, V, K, and M Hot fused tin/lead 60/40 solder dipped Rugged molded low profile construction with standoff 100 % screened to groups A MIL-PRF testing Tolerances to 0.1 % Isolated and bussed (schematic C and G) TYPICAL PERFORMANCE ABSOLUTE TRACKING TCR 25 5 ABSOLUTE RATIO TOL to 0.05 G Schematic (Isolated) N N STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 6, 8, 10 - Resistance Range 100 to 200 k per resistor Tolerance dependent (2) TCR: Absolute ± 25 ppm/ C to 300 ppm/ C - 55 C to C (1) TCR: Tracking ± 5 ppm/ C - 55 C to C Tolerance: Absolute ± 0.1 % to ± 5.0 % + 25 C Tolerance: Ratio ± 0.1 % to + 25 C Power Rating: Resistor 0.06 mw to mw (per element typical at + 25 C) (1) Maximum at + 70 C Power Rating: Package 0.18 W to 1.08 W (1) Maximum at + 70 C Stability: Absolute R ± 0.05 % 2000 h at + 70 C Stability: Ratio R ± % 2000 h at + 70 C Voltage Coefficient < 0.1 ppm/v - Working Voltage 100 V - Operating Temperature Range - 55 C to C - Storage Temperature Range - 55 C to C - Noise < - 30 db - Thermal EMF < 0.08 μv/ C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 C Shelf Life Stability: Ratio R ± % 1 year at + 25 C s (1) Consult MIL-PRF (2) H characteristic 100 to 100 k resistance range at 0.1% best R characteristic 250 to 100 k resistance range at 0.1% best R characteristic 250 to 200 k resistance range at 1% best Revision: 01-Mar Document Number: 60116

152 M83401, C83401 DIMENSIONS AND IMPRINTING in inches and millimeters Part Number Indicates Pin 1 Vishay Logo Date Code A B C CONSTRUCTION L D E F H G DIMENSION INCHES MILLIMETERS A B C ± non-accum ± 0.13 D ± typical 0.48 ± 0.15 E ± ± 0.25 F G H ± ± 0.10 L (6 Pins) / / L (8 Pins) / / L (10 Pins) / / High Purity Alumina Substrate Sputtered Film System Gold to Gold Thermo-Compression Bond (No Internal Solder) Gold Plated Copper Leads MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Molded Terminals Plating/Solder TAMELOX passivated nichrome Alumina Epoxy Copper alloy Nickel/gold/Sn63 fussed POWER DERATING C Schematic (Pin 1 Common Characteristic H) G Schematic (Isolated Characteristic H) Low Profile Low Profile 10 Pin Package 1.08 Power Rating (W) Pin Package 6 Pin Package 10 Pin Package (Char. R and V) Power Rating (W) Pin Package 8 Pin Package 6 Pin Package 10 Pin Package (Char. R and V) Single Resistor 0.12 Single Resistor 0.06 (Char. R and V) Ambient Temperature C Single Resistor Single Resistor (Char. R and V) Ambient Temperature C Revision: 01-Mar Document Number: 60116

153 M83401, C83401 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M H1000BCUF M H B C U F V MODEL (5 digits) M83401 Single in-line resistor network low profile C83401 Non burn in screened network SCHEMATIC (2 digits) 07 = 6 pin 08 = 8 pin 09 = 10 pin 21 = 6 pin (1) 22 = 8 pin (1) 23 = 10 pin (1) CHARACTERISTIC (1 digits) H = 50 ppm/ C V = 50 ppm/ C 5 ppm/ C track R = 25 ppm/ C 5 ppm/ C track K = 100 ppm/ C M = 300 ppm/ C RESISTANCE (4 digits) First 3 digits are significant figures and the last digit specifies the number of zeros to follow. (100 to 100 k ) Examples: 1000 = = 1000 TOLERANCE (1 digits) B = 0.1 % (3) D = 0.5 % (3) F = 1 % G = 2 % J = 5 % SCHEMATIC (1 digits) C = Pin 1 common G = Isolated resistors PACKAGING (2 digits) UF = Tubed UI = 100 min, 1 mult (item single lot date code) UP = 100 min.,1 mult (package unit single lot date) VENDOR (1 digits) V (2) = Vishay Dale Thin Film s (1) No internal solder (2) V" is not required for characteristics R, H, and V, it is only required for K and M. Characteristics tolerance equal to or greater than 1 %." (3) H characteristic 100 to 100 k resistance range at 0.1% best R characteristic 250 to 100 k resistance range at 0.1% best R characteristic 250 to 200 k resistance range at 1% best MODEL SCHEMATIC CHARACTERISTIC M83401 C = 6 pin (RZ070) 08 = 8 pin (RZ080) 09 = 10 pin (RZ090) 21 = 6 pin (RZ210) 22 = 8 pin (RZ220) 23 = 10 pin (RZ230) RESISTANCE RANGE TOLERANCE H = 50 ppm/ C 100 to 100K B, D, F, G, J V = 50 ppm/ C/ 5 ppm/ C track R = 25 ppm/ C 5 ppm/ C track K = 100 ppm/ C M = 300 ppm/ C 250 to 100K B, D, F, G, J 250 to 200K F, G, J 250 to 100K B, D, F, G, J 250 to 200K F, G, J 100 to 100K B, D, F, G, J SCHEMATIC C, G Revision: 01-Mar Document Number: 60116

154 Contents VTSRC20-AB, VSSRC20-AB, VSORC20-AB VTSRC20-AC, VSSRC20-AC, VSORC20-AC RC Networks VTSRC20-AA, VSSRC20-AA, VSORC20-AA VTSRC20-AD, VSSRC20-AD, VSORC20-AD VSSRC VR VSSX

155 VTSRC20-AB, VSSRC20-AB, VSORC20-AB 25 mil or 50 mil Pitch, Termination Thin Film Surface Mount Resistor/Capacitor Network Small outline, surface mount, EMI/RFI reduction If your design calls for the elimination of transmission line effects on high speed data lines Vishay Thin Film s integrated RC network, schematic AB is the answer. The planar design of our single die thin film networks offer low noise and predictable component behavior over a wide frequency range. Care must be taken when choosing matching networks that their frequency response matches that of the transmission line. Our product will reduce total assembly costs through surface mount technology, reduced component count and improved performance characteristics. Available packages SOIC, SSOP and TSSOP. SCHEMATIC AB Actual Size FEATURES Resistors and capacitors on a single chip Saves board space Reduces total assembly costs Uniform performance characteristics Compatible with automatic surface mounting equipment UL 94 V-0 flame resistant Rugged, molded case construction Compliant to RoHS Directive 2002/95/EC TYPICAL PERFORMANCE TCR TOL. RESISTOR TCC TOL. CAPACITOR STANDARD VALUES MODELS R ( ) C (pf) VSORC VSSRC VTSRC X STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride on silicon - Pin/Lead Number 20 - Resistance Range 10 to TCR: Absolute ± 200 ppm/ C 0 C to + 70 C TCR: Tracking ± 10 ppm/ C - Tolerance: Absolute ± 10 % standard (R), ± 20 % standard (C) At 1 MHz and V RMS over + 10 C to + 70 C Power Rating: Resistor 100 mw - Power Rating: Package (T)SSOP: 1 W SOIC: 1.2 W See derating curve Stability: Ratio ± 2 % 1000 h at + 70 C Operating Temperature Range 0 C to + 70 C - Storage Temperature Range - 55 C to C - Capacitance Range 10 pf to 150 pf for TSSOP 10 pf to 250 pf for SOIC/SSOP - ESD Protection > 2 kv MIL-STD-883, method 3015 Breakdown Voltage 35 V to 50 V - Revision: 08-Sep Document Number: 60084

156 VTSRC20-AB, VSSRC20-AB, VSORC20-AB DIMENSIONS in inches and millimeters Model RES/CAP Date Code B x x x x x xxx/xxx x x x x C F E H Pin #1 A D G W J DIMENSION JEDEC M0-153AC, VTSRC20-AB JEDEC M0-137AD, VSSRC20-AB JEDEC MS-013AC, VSORC20-AB INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS A ± ± max max ± ± 0.25 B (ref.) C (ref.) D E (typ.) F ± ± ± ± G x x x H ± ± ± ± ± J (ref.) W ± ± ± ± IMPRINTING VSORC, VSSRC, VTSRC 20 AB XXX / XXX MODEL PIN COUNT SCHEMATIC RESISTANCE Code: e.g. 100 = 10 W / CAPACITANCE Code: e.g. 101 = 100 pf XXXX Date code Optional marking MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Plating Tantalum nitride Silicon Molded epoxy Copper alloy 100 % matte Sn Lead Coplanarity " Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 DERATING CURVE Precent of Rated Power Ambient Temperature C PACKAGING INFORMATION MODEL LEADS TAPE AND REEL TUBES JEDEC M0-153AC, VTSRC (TSSOP) JEDEC M0-137AD, VSSRC (SSOP) JEDEC MS-013AC, VSORC (SOIC) Revision: 08-Sep Document Number: 60084

157 VTSRC20-AB, VSSRC20-AB, VSORC20-AB GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VSORC20AB330470TF V S O R C 2 0 A B T F GLOBAL MODEL VSORC VTSRC VSSRC NUMBER OF LEADS/ SCHEMATICS 20AB RESISTANCE AND TOLERANCE/ CAPACITANCE AND TOLERANCE xxxyyy First 2 digits are significant figures. Last digit specifies number of zeros to follow. PACKAGING UF = TUBED TAPE AND REEL TF = Full reels K = 10 % resistance tol. fixed M = 20 % capacitor tol. fixed Historical Part Number Example: VSORC20AB330K470MT/R (for reference purposes only) VSORC 20 AB 330K 470M T/R MODEL NUMBER OF LEADS SCHEMATIC RESISTANCE TOLERANCE PACKAGING Revision: 08-Sep Document Number: 60084

158 VTSRC20-AC, VSSRC20-AC, VSORC20-AC 25 mil or 50 mil Pitch, Termination Thin Film Surface Mount Resistor/Capacitor Network Small outline, surface mount, EMI/RFI reduction, terminator networks Vishay Thin Film s termination RC network Schematic AC, can support 18 data lines reducing overall cost. Impedance matching of transmission lines is easily done using VTF thin film integrated RC networks. Our product is designed with all components integrated within a single die. It is then packaged in JEDEC standard plastic packages. The use of surface mount technology offers improved design capability through reduced parasitic inductance and capacitance. Available packages SOIC, SSOP and TSSOP. SCHEMATIC AC Actual Size FEATURES Resistors and capacitors on a single chip Saves board space Reduces total assembly costs Uniform performance characteristics Compatible with automatic surface mounting equipment UL 94 V-0 flame resistant Rugged, molded case construction Compliant to RoHS Directive 2002/95/EC TYPICAL PERFORMANCE TCR TOLERANCE RESISTOR TCC TOLERANCE CAPACITOR STANDARD VALUES MODELS VSORC VSSRC VTSRC R ( ) C (pf) X X X X STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride on silicon - Pin/Lead Number 20 - Resistance Range 10 to TCR: Absolute ± 200 ppm/ C 0 C to + 70 C TCR: Tracking ± 10 ppm/ C - Tolerance: Absolute ± 10 % standard (R), ± 20 % standard (C) At 1 MHz and V RMS over + 10 C to + 70 C Power Rating: Resistor 100 mw - Power Rating: Package (T)SSOP: 1 W, SOIC: 1.2 W See derating curve Stability: Ratio ± 2 % 1000 h Operating Temperature Range 0 C to + 70 C - Storage Temperature Range - 55 C to C - Capacitance Range TSSOP: 10 pf to 150 pf, SOIC/SSOP: 10 pf to 250 pf - ESD Protection > 2 kv MIL-STD-883, method 3015 Breakdown Voltage 35 V to 50 V - Revision: 09-Sep Document Number: 60085

159 VTSRC20-AC, VSSRC20-AC, VSORC20-AC DIMENSIONS in inches and millimeters Model RES/CAP Date Code B x x x x x xxx/xxx x x x x C RES/CAP F E H Pin 1 A D G W J DIMENSION JEDEC M0-153AC, VTSRC20-AC JEDEC M0-137AD, VSSRC20-AC JEDEC MS-013AC, VSORC20-AC INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS A ± ± max max ± ± 0.25 B (ref.) C (ref.) D E (typ.) F ± ± ± ± G x x x H ± ± ± ± ± J (ref.) W ± ± ± ± IMPRINTING VSORC, VSSRC, VTSRC 20 AC XXX / XXX MODEL PIN COUNT SCHEMATIC XXXX Date code RESISTANCE Code: e.g. 100 = 10 / Optional marking CAPACITANCE Code: e.g. 101 = 100 pf MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Plating Tantalum nitride Silicon Molded epoxy Copper alloy 100 % matte Sn Lead Coplanarity " Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 DERATING CURVE Precent of Rated Power Ambient Temperature C PACKING INFORMATION MODEL LEADS TAPE AND REEL TUBES JEDEC M0-153AC, VTSRC (TSSOP) JEDEC M0-137AD, VSSRC (SSOP) JEDEC MS-013AC, VSORC (SOIC) Revision: 09-Sep Document Number: 60085

160 VTSRC20-AC, VSSRC20-AC, VSORC20-AC GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VSSRC20AC330470TF V S S R C 2 0 A C T F GLOBAL MODEL VSSRC VTSRC VSORC NUMBER OF LEADS/ SCHEMATICS 20AC RESISTANCE AND TOLERANCE/ CAPACITANCE AND TOLERANCE xxxyyy First 2 digits are significant figures. Last digit specifies number of zeros to follow. PACKAGING UF = TUBED TAPE AND REEL TF = Full reels K = 10 % resistance tol. fixed M = 20 % capacitor tol. fixed Historical Part Number example: VSSRC20AC330K470MT/R (for reference purposes only) VSSRC 20 AC 330K 470M T/R MODEL NUMBER OF LEADS SCHEMATIC RESISTANCE TOLERANCE PACKAGING Revision: 09-Sep Document Number: 60085

161 VTSRC20-AA, VSSRC20-AA, VSORC20-AA 25 mil or 50 mil Pitch, T-Filter Thin Film Surface Mount Resistor/Capacitor Network Actual Size Small outline, surface mount, EMI/RFI reduction Vishay Thin Film s T-filter network is an integrated thin film network on a single die. Noise suppression is at a maximum with the use of thin film technology. The T-filter network, schematic AA is designed to suppress EMI/RFI noise with such applications as I/O ports of personal computers and peripherals, workstations and local area networks. With a rugged molded case to protect the circuit from the environment and an integrated thin film network this product is your choice when reduced size, improved accuracy and surface mount capability are your goals. Available packages SOIC, SSOP and TSSOP. FEATURES Resistors and capacitors on a single chip Saves board space Reduces total assembly costs Uniform performance characteristics UL 94 V-0 flame resistant Rugged, molded case construction VTSRC - JEDEC M0-153AC VSSRC - JEDEC M0-137AD VSORC - JEDEC MS-013AC Compliant to RoHS Directive 2002/95/EC TYPICAL PERFORMANCE TCR TOLERANCE RESISTOR % TCC TOLERANCE CAPACITOR % SCHEMATIC AA STANDARD VALUES MODELS VSORC VSSRC VTSRC R ( ) C (pf) X X X STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride on silicon - Pin/Lead Number 20 - Resistance Range 10 to TCR: Absolute ± 200 ppm/ C 0 C to + 70 C TCR: Tracking ± 10 ppm/ C - Tolerance: Absolute ± 10 % standard (R), ± 20 % standard (C) At 1 MHz and V RMS over + 10 C to + 70 C Power Rating: Resistor 100 mw - Power Rating: Package (T)SSOP: 1 W, SOIC: 1.2 W See derating curve Stability: Ratio ± 2 % 1000 h Operating Temperature Range 0 C to + 70 C - Storage Temperature Range - 55 C to C - Capacitance Range TSSOP: 10 pf to 150 pf, SOIC/SSOP: 10 pf to 250 pf - ESD Protection > 2 kv MIL-STD-883, method 3015 Breakdown Voltage 35 V to 50 V - Revision: 09-Sep Document Number: 60083

162 VTSRC20-AA, VSSRC20-AA, VSORC20-AA DIMENSIONS in inches and millimeters Model RES/CAP Date Code B x x x x x xxx/xxx x x x x C RES/CAP E F H Pin #1 A D G W J DIMENSION JEDEC M0-153AC, VTSRC20-AA JEDEC M0-137AD, VSSRC20-AA JEDEC MS-013AC, VSORC20-AA INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS A ± ± max max ± ± 0.25 B (ref.) C (ref.) D E (typ.) F ± ± ± ± G x x x H ± ± ± ± ± J (ref.) W ± ± ± ± IMPRINTING VSORC, VSSRC, VTSRC 20 AA XXX / XXX MODEL PIN COUNT SCHEMATIC XXXX Date code RESISTANCE Code: e.g. 100 = 10 W / Optional marking CAPACITANCE Code: e.g. 101 = 100 pf MECHANICAL SPECIFICATIONS Resistive Element Tantalum nitride Substrate Material Body Terminals Plating Silicon Molded epoxy Copper alloy 100 % matte Sn Lead Coplanarity " Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 DERATING CURVE Precent of Rated Power Ambient Temperature C PACKING INFORMATION MODEL LEADS TAPE AND REEL TUBES JEDEC M0-153AC, VTSRC (TSSOP) JEDEC M0-137AD, VSSRC (SSOP) JEDEC MS-013AC, VSORC (SOIC) Revision: 09-Sep Document Number: 60083

163 VTSRC20-AA, VSSRC20-AA, VSORC20-AA GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTSRC20AA330470TF V T S R C 2 0 A A T F GLOBAL MODEL VTSRC VSSRC VSORC NUMBER OF LEADS/ SCHEMATICS 20AA RESISTANCE AND TOLERANCE/ CAPACITANCE AND TOLERANCE xxxyyy First 2 digits are significant figures. Last digit specifies number of zeros to follow. PACKAGING UF = TUBED TAPE AND REEL TF = Full reels K = 10 % resistance tol. fixed M = 20 % capacitor tol. fixed Historical Part Number example: VTSRC20AA330K470MT/R (for reference purposes only) VTSRC 20 AA 330K 470M T/R MODEL NUMBER OF LEADS SCHEMATIC RESISTANCE TOLERANCE PACKAGING Revision: 09-Sep Document Number: 60083

164 VTSRC20-AD, VSSRC20-AD, VSORC20-AD 25 mil or 50 mil Pitch, T-Filter Thin Film Surface Mount Resistor/Capacitor Network Actual Size Small outline, surface mount, EMI/RFI reduction, T-filter networks Vishay Thin Film s schematic AD is designed as an 8 channel filter for use with personal computer and peripheral 110 ports such as SCSI ports. The use of single die technology for filtering minimizes space and allows for more freedom in routing. With a rugged molded case to protect the circuit from the environment and an integrated thin film network this product is your choice when reduced size, improved accuracy and surface mount capability are your goals. Available packages SOIC, SSOP and TSSOP. FEATURES Resistors and capacitors on a single chip Saves board space Reduces total assembly costs Uniform performance characteristics Compatible with automatic surface mo unting equipment UL 94 V-0 flame resistant Rugged, molded case construction Compliant to RoHS Directive 2002/95/EC TYPICAL PERFORMANCE TCR TOLERANCE RESISTOR TCC TOLERANCE CAPACITOR SCHEMATIC AD STANDARD VALUES MODELS VSORC VSSRC VTSRC R ( ) C (pf) X STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride on silicon - Pin/Lead Number 20 - Resistance Range 10 to TCR: Absolute ± 200 ppm/ C 0 C to + 70 C TCR: Tracking ± 10 ppm/ C - Tolerance: Absolute ± 10 % standard (R), ± 20 % standard (C) At 1 MHz and V RMS over + 10 C to + 70 C Power Rating: Resistor 100 mw - Power Rating: Package (T)SSOP: 1 W, SOIC: 1.2 W See derating curve Stability: Ratio ± 2 % 1000 h Operating Temperature Range 0 C to + 70 C - Storage Temperature Range - 55 C to C - Capacitance Range TSSOP: 10 pf to 150 pf, SOIC/SSOP: 10 pf to 250 pf - ESD Protection > 2 kv MIL-STD-883, method 3015 Breakdown Voltage 35 V to 50 V - Revision: 09-Sep Document Number: 60086

165 VTSRC20-AD, VSSRC20-AD, VSORC20-AD DIMENSIONS in inches and millimeters Model RES/CAP Date Code B x x x x x xxx/xxx x x x x C Pin 1 A D RES/CAP F G W J E H DIMENSION JEDEC M0-153AC, VTSRC20-AD JEDEC M0-137AD, VSSRC20-AD JEDEC MS-013AC, VSORC20-AD INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS A ± ± max max ± ± 0.25 B (ref.) C (ref.) D E (typ.) F ± ± ± ± G x x x H ± ± ± ± ± J (ref.) W ± ± ± ± IMPRINTING VSORC, VSSRC, VTSRC 20 AD XXX / XXX MODEL PIN COUNT SCHEMATIC XXXX Date code RESISTANCE Code: e.g. 100 = 10 / Optional marking CAPACITANCE Code: e.g. 101 = 100 pf MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Plating Tantalum nitride Silicon Molded epoxy Copper alloy 100 % matte Sn Lead Coplanarity " Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 DERATING CURVE Precent of Rated Power Ambient Temperature C PACKING INFORMATION MODEL LEADS TAPE AND REEL TUBES JEDEC M0-153AC, VTSRC (TSSOP) JEDEC M0-137AD, VSSRC (SSOP) JEDEC MS-013AC, VSORC (SOIC) Revision: 09-Sep Document Number: 60086

166 VTSRC20-AD, VSSRC20-AD, VSORC20-AD GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTSRC20AD330470TF V T S R C 2 0 A D T F GLOBAL MODEL VSSRC VTSRC VSORC NUMBER OF LEADS/ SCHEMATICS 20AD RESISTANCE AND TOLERANCE/ CAPACITANCE AND TOLERANCE xxxyyy First 2 digits are significant figures. Last digit specifies number of zeros to follow. PACKAGING UF = TUBED TAPE AND REEL TF = Full reels K = 10 % resistance tol. fixed M = 20 % capacitor tol. fixed Historical Part Number example: VTSRC20AD330K470MT/R (for reference purposes only) VTSRC 20 AD 330K 470M T/R MODEL NUMBER OF LEADS SCHEMATIC RESISTANCE TOLERANCE PACKAGING Revision: 09-Sep Document Number: 60086

167 VSSRC mil Pitch Thin Film Surface Mount Resistor/Capacitor Network FEATURES Rugged, molded case construction JEDEC MO-137AD Reduces total assembly costs Saves board space Compatible with automatic surface mounting equipment Uniform performance characteristics Resistors and capacitors on a single chip UL 94 V-0 flame resistant Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC definition Actual Size TYPICAL PERFORMANCE TCR TOLERANCE IEEE 1284 parallel port termination network RESISTOR TCC TOLERANCE CAPACITOR SCHEMATIC R 2 R 2 R 2 R 2 R 2 R 2 R 2 R 2 R STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Pin/Lead Number 20 - Resistance Range 10 to 10 k - TCR: Absolute ± 200 ppm/ C - TCR: Tracking - - Tolerance: Absolute ± 10 % ( and R 2 ), ± 20 % (C) At 1 MHz and V RMS over + 10 C to + 70 C Power Rating: Resistor 100 mw - Power Rating: Package 1 W - Stability: Ratio - - Operating Temperature Range - - Storage Temperature Range - - Capacitance Range 27 pf to 220 pf Based on number of resistors ESD Protection > 2 kv MIL-STD-883, method 3015 Breakdown Voltage 25 V - Revision: 20-Oct Document Number: 60077

168 VSSRC1284 DIMENSIONS in inches and millimeters Part Number Date Code B C VSSRC 1284 E MODEL VSSRC1284 DIMENSION INCHES MINIMUM MAXIMUM A max max. B (ref.) C (ref.) Pin 1 A D F G W J H D E (typ.) F ± ± 0.08 G x x 45 H ± ± 0.20 J (ref.) W ± ± 0.13 Mold flash not included in body dimensions IMPRINTING VSSRC1284-X Date code -X = Molded version number from table below MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Plating Tantalum nitride Silicon Molded epoxy Copper alloy 100 % matte Sn Lead Coplanarity " Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 DERATING CURVE Precent of Rated Power Ambient Temperature C STANDARD VALUES AVAILABLE MODELS ± 10 % ( ) R 2 ± 10 % ( ) C ± 20 % (pf) VSSRC K VSSRC K VSSRC K VSSRC K VSSRC K VSSRC K VSSRC K Revision: 20-Oct Document Number: 60077

169 VSSRC1284 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VSSRC1284-1TF V S S R C T F GLOBAL MODEL VALUE PACKAGING VSSRC UF = TUBED TAPE AND REEL TF = Full reels Historical Part Number example: VSSRC1284-1T/R (for reference purposes only) VSSRC T/R MODEL VALUE PACKAGING Revision: 20-Oct Document Number: 60077

170 VR Molded, SOT-23 Thin Film Surface Mount Resistor/Capacitor Network Vishay s R/C Network, packaged in the standard SOT-23, can be strategically placed on your PC board to do localized filtering. The R/C Network can be located at the point of emission before transients are carried through the design. The sophisticated process of integrating the Resistor and Capacitor on a single substrate provides you with higher performance and more consistent results over discrete components. A real estate savings will also be gained. Applications include EMI/RFI suppression and AC termination. These networks, in the SOT-23, along with Vishay s high component count R Networks and R/C Networks in a variety of standard IC packages, provides you with the exact solution for your redesign or new design. Visit our website for the total picture on available R Networks and R/C Networks from our guaranteed stock program. SCHEMATIC 3 C R C R 3 C R R 3 C R FEATURES Resistor and capacitor integrated into a Thin Film network Filters at the source of emissions More consistent performance characteristics than discretes Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC definition TYPICAL PERFORMANCE TCR TOLERANCE RESISTOR TCC TOLERANCE CAPACITOR VR TOOLED VALUES (1) SCHEMATIC R ( ) C (pf) D C A Consult application engineering for custom values 1 2 D Tapped Filter 1 2 C AC Termination 1 A T Filter 2 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Pin/Lead Number 3 - Resistance Range 10 to TCR: Absolute ± 200 ppm/ C 0 C to + 70 C TCR: Tracking - - Tolerance: Absolute ± 10 % standard (R), ± 20 % standard (C) At 1 MHz and V RMS over + 10 C to + 70 C Power Rating: Resistor 100 mw - Power Rating: Package 1 W at + 70 C Stability: Ratio - - Operating Temperature Range 0 C to + 70 C - Storage Temperature Range - 55 C to C - Capacitance Range 10 pf to 80 pf - ESD Protection - - Breakdown Voltage 25 V to 45 V - Revision: 20-Oct Document Number: 60088

171 VR DIMENSIONS in inches and millimeters B 3 W T A H L S A 1 K 1 2 J Ø JEDEC STANDARD TO-236 DIMENSION INCHES MILLIMETERS MINIMUM MAXIMUM MINIMUM MAXIMUM A A B S W L H T J K Ø IMPRINTING VRA VRC VRD MECHANICAL SPECIFICATIONS Resistive Element Tantalum nitride Capacitive Material Thin film Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Plating 100 % matte Sn Lead Coplanarity " Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 SCHEMATIC AA AC AD DERATING CURVE Precent of Rated Power Ambient Temperature C PACKAGING INFORMATION MODEL LEADS TAPE AND REEL VR Revision: 20-Oct Document Number: 60088

172 VR GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VRD330K470MTF V R D K M T F GLOBAL MODEL SCHEMATICS RESISTANCE AND TOLERANCE/ CAPACITANCE AND TOLERANCE PACKAGING VR D = Tapped filter C = AC termination A = T filter xxxk/yyym First 2 digits are significant figures. Last digit specifies number of zeros to follow e.g. 330K/470M = 330 W 10 % 47 pf 20 % K = 10 % M = 20 % UF = TUBED TAPE AND REEL TF = Full reels Historical Part Number example: VRD330K479MT/R (for reference purposes only) VR D 330K 470M T/R MODEL SCHEMATIC RESISTANCE TOLERANCE PACKAGING Revision: 20-Oct Document Number: 60088

173 VSSX mil Pitch, IEEE 1284 Termination Thin Film Surface Mount Resistor, Capacitor, Diode Product is pictured larger than actual size to show detail Vishay has upgraded the standard IEEE 1284 Thin Film technology Network, incorporating diodes for protecting the inputs/outputs from electro-static discharge (ESD). The sophisticated circuit is housed in a standard QSOP, 28-pin package. Uses include ECP/EPP parallel port terminations for PC peripherals, notebooks, desktops, workstations and servers. This is a guaranteed stock part. FEATURES One sophisticated, integrated Thin Film technology solution Up-graded IEEE 1284 parallel port termination, pull-up with the addition of diodes for filtering on the parallel port Standard QSOP package (28 pins) - JEDEC MO-137AF 17 terminating lines Reduces total cost Increase board utilization Better performance over discretes Compliant to RoHS Directive 2002/95/EC SCHEMATIC GND V CC R 2 R 2 R 2 R 2 R 2 R 2 R 2 R 2 R STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Polysilicon/thin film on silicon - Pin/Lead Number 28 - Resistance Range - - TCR: Absolute - - TCR: Tracking - - Tolerance: Absolute ± 10 % (R), ± 20 % (C) - Power Rating: Resistor 100 mw - Power Rating: Package 1 W - Stability: Ratio - - Operating Temperature Range 0 C to + 70 C - Storage Temperature Range - 65 C to C - Capacitance Range - - ESD Protection See table - Breakdown Voltage - - Signal clamp voltage (+) clamp > 6 V; (-) clamp < - 6 V - Maximum leakage current at V CC 1 μa Maximum at 25 C Revision: 09-Sep Document Number: 60089

174 VSSX1284 ESD PROTECTION MAXIMUM MINIMUM Peak Discharge Voltage at any I/O, Human Body Model, Method 3015 (1) + 8 kv - 4 kv In System Protection HBM (2) + 15 kv - 8 kv In System Protection, IEC , Level 2 (2)(3) + 8 kv - 4 kv Channel Clamp Voltage at 8 kv ESD Pulses, HBM (1)(2) + 30 V - 30 V s (1) Human body model per MIL-STD-883, method 3015 C Discharge = 100 pf, R Discharge = 1.5 k pin 20 at 5 V and pin 22 at ground. (2) Pin 22 grounded, pin 20 to V CC all other pins are open. ESD contact discharge between ground and pins 1, 2, 8, 10, 12, 15, 16, 17, 18, 19, 21, 23 through 28, one at a time. (3) Standard IEC with C Discharge = 150 pf, R Discharge = 330 pin 20 at 5 V and pin 22 at ground. DIMENSIONS in inches and millimeters e B Mold flash not included in body dimensions. JEDEC MO-137 package A1 A D 1 SEATING PLANE C L E H h x 45 a DIMENSION INCHES MILLIMETERS A A B C D E e H h L a 8 MECHANICAL SPECIFICATIONS R/C Element Polysilicon/thin film Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Plating 100 % matte Sn Lead Coplanarity 0.005" Marking Resistance to Solvents MIL-STD-202, method 15 Flammability UL 94 V-0 STANDARD VALUES AVAILABLE MODELS ( ) R 2 ( ) C (pf) VSSX1284A 4.7K VSSX1284B 2.2K GLOBAL PART NUMBER INFORMATION Global Part Numbering: VSSX1284ATF V S S X A T F GLOBAL MODEL VSSX1284A or VSSX1284B PACKAGING UF = TUBED TAPE AND REEL TF = Full reels Revision: 09-Sep Document Number: 60089

175 Contents Quick-Chip Prototype Service Guide Quick-Net Prototype Guidelines Prototyping Quick-Net Prototype Fax Form E6, E12, E24 and E96 Tables 174 Application Guide

176 Quick-Chip Prototype Service Guide How To Use Order Via Quick-Chip 1. SALES REPRESENTATIVE OR DISTRIBUTOR Receives request for products needing urgent delivery Offers Quick-Chip program to customer Enters RFQ to Vishay via partners/sap RFQ must include SAP part number of product needed, quantity required, and desired lead time 2. VISHAY MARKETING Adds Quick-Chip line item lot charge and lead time to quote (LOTCHG-VTFQCKCHIP) Returns RFQ to sales representative or distributor Quote is valid for 48 h 3. SALES REPRESENTATIVE OR DISTRIBUTOR The main families included in the program are listed below. However, Quick-Chip service can be requested on any Vishay Thin Film Resistor. Products offered for the 10-day Quick-Chip program: P- Thin film precision wraparound chip resistor P ns series PTN Thin film tantalum nitride wraparound chip resistor Product offered for the 15-day Quick Chip program: M55342 MILITARY QPL CHIP RESISTOR M55342/01 M55342/07 M55342/02 M55342/08 M55342/03 M55342/09 M55342/04 M55342/10 M55342/05 M55342/11 M55342/06 M55342/12 L- Low value (0.03 to 10 ) wraparound chip resistor Delivers quote to customer and obtains a purchase order Phones customer service with purchase order and enters order and faxes PO information 4. CUSTOMER SERVICE Enters the order on SAP with reference to the quote Contacts Vishay Thin Film planning to ensure capacity and availability 5. VISHAY THIN FILM PLANNING Schedules the order Order is built and shipped The clock starts when the order is entered on SAP and stops when product is shipped Revision: 19-Jan Document Number: 60079

177 Quick-Net Prototype Guidelines FEATURES Custom thin film networks in 2 weeks No NRE charges typical Available Available in both moisture resistant tantalum nitride and passivated nichrome resistor film Available 72 h express on some formats Compliant to RoHS Directive 2002/95/EC * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE All these packages are standard. Other packages available on request. Our superior engineering capabilities enable us to provide the industry s shortest delivery for prototypes. Let Vishay Quick-Net speed your prototypes to qualification. Quick-Net high quality networks are available in a variety of package formats, including single-in-line (SIP), hermetic DIP, flatpack and leadless chip carriers. The networks are available with either tantalum nitride or passivated nichrome resistor film. TCR TOL. ABSOLUTE TRACKING 25 5 ABSOLUTE RATIO SCHEMATIC STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Passivated nichrome to 55 k /200 to 120 k /400 to 250 k Based on fil sheet resistance TCR: Absolute ± 25 ppm/ C - 55 C to C TCR: Tracking ± 5 ppm/ C - Tolerance: Absolute ± 0.1 % to ± 1.0 % - Tolerance: Ratio ± 0.01 % to ± 0.1 % Values over 1 k 25 mw C to C - Material Resistance Range Power Rating: Resistor Operating Temperature Range Consult factory for specifications ORDERING INFORMATION Copy, fill out and fax the form on the following page to send your prototype specifications to the Quick-Net team. Or call (716) to discuss your requirements with a member of the Quick-Net team. Revision: 30-Jan-07 Document Number: