Pin Configurations/Functional Diagrams/Truth Table COM COM GND MAX4644 OFF OFF. Maxim Integrated Products 1
|
|
- Brett Jacobs
- 6 years ago
- Views:
Transcription
1 9-7; Rev ; 3/ High-Speed, Low-Voltage, 4Ω, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.8V to +.V. It provides low 4Ω on-resistance (R ON ) as well as Ω R ON flatness over the entire analog signal range. The offers fast switching times of less than 2ns while ensuring break-before-make operation. It typically consumes only.µw of quiescent power, making it suitable for use in low-power, portable applications. The s features include low leakage currents over the entire temperature range, TTL/CMOS-compatible digital logic, and excellent AC characteristics. It is packaged in either a small 8-pin µmax or a tiny -pin SOT23. Applications Battery-Operated Equipment Audio and Video Signal Routing Low-Voltage Data-Acquisition Systems Sample-and-Hold Circuits Communications Circuits Rail-to-Rail is a trademark of Nippon Motorola, Ltd. Features +.8V to +.V Single-Supply Operation Rail-to-Rail Analog Signal Range Guaranteed R ON 4Ω max (+V supply) 8Ω max (+3V supply) +.8V Operation R ON 3Ω typ Over Temperature t ON 8ns typ, t OFF 2ns typ Guaranteed RON Flatness:.7Ω typ (+V supply) Guaranteed R ON Match Between Channels:.Ω typ (+V supply) Low Leakage (<.3nA) Over Entire Temperature Range Excellent AC Characteristics Low Crosstalk: -82dB at MHz High Off-Isolation: -8dB at MHz.8% Total Harmonic Distortion Low Power Consumption: <.µw PART EUT-T EUA Ordering Information TEMP. RANGE -4 C to +8 C -4 C to +8 C P- PACKAGE SOT23-8 µmax TOP MARK AAHQ Pin Configurations/Functional Diagrams/Truth Table TOP VIEW N.C SOT23-4 N.C. µmax ON OFF OFF ON Maxim Integrated Products For free samples and the latest literature, visit or phone For small orders, phone
2 ABSOLUTE MAXIMUM RATGS All Voltages Referenced to...-.3v to +V,,, (Note )...-.3V to ( +.3V) Continuous Current (any terminal)...±2ma Continuous Current (,, and )...±ma Peak Current (,, and, pulsed at ms, % duty cycle)... ±ma Continuous Power Dissipation (T A = +7 C) -Pin SOT23 (derate 8.7mW/ C above +7 C)... 9mW 8-Pin µmax (derate 4.mW/ C above +7 C)... 32mW Operating Temperature Range...-4 C to +8 C Junction Temperature...+ C Storage Temperature Range...- C to + C Lead Temperature (soldering, s) C Note : Signals on,,, or exceeding or are clamped by internal diodes. Limit forward-diode current to maximum current rating. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS Single +V Supply ( = +4.V to +.V, V H = 2.4V, V L =.8V, T A = T M to T MAX, unless otherwise noted. Typical values are at.) PARAMETER ANALOG SWITCH Analog Signal Range SYMBOL V, V, V CONDITIONS M TYP MAX UNITS V On-Resistance R ON = 4.V, I = ma, V or V = to T A = T M to T MAX Ω On-Resistance Match Between Channels (Note 2) R ON = 4.V, I = ma, V or V = to T A = T M to T MAX..4 Ω On-Resistance Flatness (Note 3) R FLAT = 4.V, I = ma, V or V = to T A = T M to T MAX.7.2 Ω, Off-Leakage Current (Note 4) I (OFF), I (OFF) =.V, V = V or 4.V, V or V = 4.V or V T A = T M to T MAX na Off-Leakage Current (Note 4) I (OFF) =.V, V = V or 4.V, V or V = 4.V or V T A = T M to T MAX na On-Leakage Current (Notes 4, ) DIGITAL PUTS Input Logic High Input Logic Low Input Current I (ON) V IH V IL I =.V, V = V or 4.V V =.8V or 2.4V T A = T M to T MAX na V V µa 2
3 ELECTRICAL CHARACTERISTICS Single +V Supply (continued) ( = +4.V to +.V, V H = 2.4V, V L =.8V, T A = T M to T MAX, unless otherwise noted. Typical values are at.) PARAMETER DYNAMIC Turn-On Time (Note 4) Turn-Off Time (Note 4) SYMBOL t ON t OFF R L = 3Ω; C L = 3pF; V, V = 3V; Figure 2 R L = 3Ω; C L = 3pF; V, V = 3V; Figure 2 CONDITIONS T A = T M to T MAX T A = T M to T MAX M TYP MAX 8 3 UNITS ns ns Break-Before-Make (Note 4) t BBM R L = 3Ω; C L = 3pF; V or V = +3V; Figure 2 T A = T M to T MAX 8 ns Charge Injection Q V GEN =, R GEN =, C L = nf, Figure 4 pc, Off-Capacitance Switch On-Capacitance Off-Isolation (Note ) Crosstalk (Note 7) Total Harmonic Distortion SUPPLY Positive Supply Current C (OFF), C (OFF) C (ON) V ISO V CT THD I+ or =, f = MHz, Figure f = MHz, Figure C L = pf, R L = Ω, f = MHz Figure 3 f = MHz C L = pf, R L = Ω, f = MHz Figure 3 f = MHz R L = Ω,.Vp-p, f = 2Hz to 2kHz =.V, V = or.. µa pf pf db db % ELECTRICAL CHARACTERISTICS Single +3V Supply ( = +2.7V to +3.3V, V H = 2.V, V L =.4V, T A = T M to T MAX, unless otherwise noted. Typical values are at.) PARAMETER SYMBOL CONDITIONS M TYP MAX UNITS ANALOG SWITCH Analog Signal Range V, V, V V On-Resistance R ON = 2.7V, I = ma, V or V = to T A = T M to T MAX 8 9 Ω On-Resistance Match Between Channels (Note 2) R ON = 2.7V, I = ma, V or V = to T A = T M to T MAX..4 Ω On-Resistance Flatness (Note 3) R FLAT = 2.7V, I = ma, V or V = to. 3 T A = T M to T MAX 3. Ω 3
4 ELECTRICAL CHARACTERISTICS Single +3V Supply (continued) ( = +2.7V to +3.3V, V H = 2.V, V L =.4V, T A = T M to T MAX, unless otherwise noted. Typical values are at.) PARAMETER SYMBOL CONDITIONS M TYP MAX UNITS DIGITAL PUTS Input Logic High V IH 2. V Input Logic Low V IL.4 V Input Current I V =.4V or 2.V -... µa DYNAMIC Turn-On Time (Note 4) t ON R L = 3Ω; C L = 3pF; V, V = 2V; Figure 2 T A = T M to T MAX ns Turn-Off Time (Note 4) t OFF R L = 3Ω; C L = 3pF; V, V = 2V; Figure 2 T A = T M to T MAX ns Break-Before-Make (Note 4) t BBM R L = 3Ω; C L = 3pF; V, V = 2V; Figure 2 T A = T M to T MAX 8 ns Charge Injection, Off-Capacitance Switch On-Capacitance Off-Isolation (Note ) Crosstalk (Note 7) SUPPLY Positive Supply Current Q C (OFF), C (OFF) C (ON) V ISO V CT I+ V GEN =, R GEN =, C L = nf, Figure 4 or =, f = MHz, Figure f = MHz, Figure C L = pf, R L = Ω, Figure 3 C L = pf, R L = Ω, Figure 3 f = MHz f = MHz f = MHz f = MHz = 3.3V, V = or.. µa pc pf pf db db Note 2: R ON = R ON(MAX) - R ON(M). Note 3: R ON flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal range. Note 4: Guaranteed by design. Note : On-Leakage performed with voltage applied to, with and left floating. Note : Off-Isolation = 2log (V O / V I ), where V O is V and V I is either V or V from the network analyzer. Note 7: Crosstalk is measured between the two switches. 4
5 ( = +V or +3V, V H =, V L =,, unless otherwise noted.) RON (Ω) 2 I = ma ON-RESISTAE vs. V =.8V = 2.V = 3V = V - RON (Ω) ON-RESISTAE vs. TEMPERATURE I = ma = 3V = V Typical Operating Characteristics -2 LEAKAGE (pa) ON-/OFF-LEAKAGE CURRENT vs. TEMPERATURE ON-LEAKAGE OFF-LEAKAGE V (V) TEMPERATURE ( C) TEMPERATURE ( C) 4 2 = V CHARGE JECTION vs. V SUPPLY CURRENT vs. SUPPLY VOLTAGE = = SUPPLY CURRENT vs. TEMPERATURE - CHARGE JECTION (pc) V (V) SUPPLY CURRENT (na) = SUPPLY VOLTAGE (V) SUPPLY CURRENT (na) 2 = V =.8V = 3V TEMPERATURE ( C) LOGIC THRESHOLD (V) LOGIC THRESHOLD vs. SUPPLY VOLTAGE -7 SWITCHG TIMES (ns) SWITCHG TIMES vs. SUPPLY VOLTAGE t ON t OFF -8 SWITCHG TIMES (ns) SWITCHG TIMES vs. TEMPERATURE = V t ON t OFF SUPPLY VOLTAGE (V) SUPPLY VOLTAGE (V) TEMPERATURE ( C)
6 ( = +V or +3V, V H =, V L =,, unless otherwise noted.) (db/div) = V FREQUEY RESPONSE ON-LOSS OFF-ISOLATION Typical Operating Characteristics (continued) - THD (%) TOTAL HARMONIC DISTORTION vs. FREQUEY = V FREQUEY (MHz)... FREQUEY (khz) Pin Description SOT23 µmax NAME FUTION Logic-Controlled Input 2 4 Positive Supply Voltage Input. Bypass with a.µf capacitor to. 3 3 Ground, 7 N.C. No Connection. Not internally connected. 4 2 Analog Switch Normally Closed Terminal Analog Switch Common Terminal 8 Analog Switch Normally Open Terminal Note: The switches are bidirectional, which means that a signal can be passed through either side of the on switch. However, the typical off-capacitances differ as shown in the Electrical Characteristics.
7 N, Figure. Overvoltage Protection Using External Blocking Diodes Applications Information The operates from a single supply ranging from +.8V to +.V. The device is guaranteed to be functional over that supply range, but TTL/CMOS compatibility is only valid for operation using a +V supply. All voltage levels are referenced to. Positive and negative DC analog inputs or AC signals can be accommodated by shifting and. ESD-protection diodes are internally connected between each analog-signal pin and both and. One of these diodes conducts if any analog signal exceeds or (Figure ). Virtually all of the analog leakage current comes from the ESD diodes to or. Although the ESD diodes on a given signal pin are identical, and therefore fairly well balanced, they are reverse biased differently. Each is biased by either or and the analog signal. This means their leakages will vary as the signal varies. The difference in the two diode leakages to the and pins constitutes the analog-signal-path leakage current. All analog leakage current flows between each pin and one of the supply terminals, not to the other switch terminal. This is why both sides of a given switch can show leakage currents of the same or opposite polarity. There is no normal current path between the analogsignal paths and or. and also power the internal logic and logic-level translators. The logiclevel translators convert the logic level into switched and signals to drive the analog signal gates. TRANSISTOR COUNT: Chip Information 7
8 V V Ω OPEN 3pF 3Ω V V IH +.V % % V V 9% 9% t r < ns t f < ns t ON t OFF V V Ω OPEN 3Ω 3pF V V IH +.V % % V V 9% 9% t OFF t ON V S V V V Ω V S 3Ω 3pF V V IH +.V V S V t BBM % % 9% 9% t BBM t BBM = t ON() - t OFF() OR t BBM = t ON() - t OFF() Figure 2. Switching Times 8
9 .µf OR Ω V V OUT NETWORK ANALYZER Ω Ω MEAS REF Ω Ω MEASUREMENTS ARE STANDARDIZED AGAST SHORT AT SOCKET TERMALS. OFF-ISOLATION IS MEASURED BETWEEN AND OFF TERMAL ON EACH SWITCH. ON-LOSS IS MEASURED BETWEEN AND ON TERMAL ON EACH SWITCH. SIGNAL DIRECTION THROUGH SWITCH IS REVERSED; WORST VALUES ARE RECORDED. OFF-ISOLATION = 2log V OUT V ON-LOSS = 2log V OUT V Figure 3. Off-Isolation and On-Loss V Ω OR V OR V = V V OUT C L pf AS REQUIRED OR MHz CAPACITAE ANALYZER V Figure.,, and Capacitance V OUT V OUT V OUT IS THE MEASURED VOLTAGE DUE TO CHARGE TRANSFER ERROR Q WHEN THE CHANNEL TURNS OFF. Q = V OUT x C L Figure 4. Charge Injection 9
10 Package Information LSOT.EPS
11 Package Information (continued) 8LUMAXD.EPS
12 TES Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 2 Maxim Integrated Products, 2 San Gabriel Drive, Sunnyvale, CA Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
High-Speed, Low-Voltage, 4Ω, Dual SPST CMOS Analog Switches
9-; Rev ; / High-Speed, Low-oltage, Ω, Dual SPST General Description The MAX//MAX are monolithic, dual, single-pole/single-throw (SPST) switches that can operate from a single supply ranging from +. to
More informationMultiplexers/Switches
EVALUATION KIT AVAILABLE / General Description The / are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer () and a double-pole/double-throw (DPDT) switch
More information2.5Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package
19-242; Rev 1; 2/3 2.5Ω, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +1.8V to +5.5V supply. The / are single-pole/single-throw
More informationPART MAX4503CPA MAX4503CSA. Pin Configurations 1 5 V+ COM N.C. V+ 4 MAX4504 MAX4503 DIP/SO
9-064; Rev ; /07 Low-Voltage, Dual-Supply, SPST, General Description The are low-voltage, dual-supply, single-pole/single-throw (SPST), CMOS analog switches. The is normally open (NO). The is normally
More informationPin Configurations/Functional Diagrams/Truth Tables COM SC70-6 SC70-6 PIN 5 5 XYZ NOTE: SC70-5 PACKAGE HAS LETTERING NEAREST PIN 5.
9-359; Rev ; / General Description The MAX76/MAX77 single-pole/single-throw (SPST) switches operate from a single.8v to 5.5V supply. The MAX76 is a normally closed (NC) switch and the MAX77 is the normally
More information0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches
19-116; Rev ; 1/6.Ω, Low-Voltage, Single-Supply Dual SPST General Description The are low on-resistance, low-voltage, dual single-pole/single-throw (SPST) analog switches that operate from a single +1.6V
More informationQuad, Rail-to-Rail, Fault-Protected, SPST Analog Switches
19-2418; Rev ; 4/2 Quad, Rail-to-Rail, Fault-Protected, General Description The are quad, single-pole/single-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard
More informationTOP VIEW COUT1 COM2. Maxim Integrated Products 1
19-77; Rev ; 7/4.75Ω, Dual SPDT Audio Switch with General Description The dual, single-pole/double-throw (SPDT) switch operates from a single +2V to +5.5V supply and features rail-to-rail signal handling.
More informationLow-Voltage, High-Speed, Quad, SPST CMOS Analog Switches
9-5; Rev ; 7/99 Low-Voltage, High-Speed, Quad, SPST General Description The quad, low-voltage, high-speed, single-pole/single-throw (SPST) analog switches are pin compatible with the industry-standard
More informationMAX4751/MAX4752/MAX Ω, Low-Voltage, Single-Supply Quad SPST Analog Switches
// General Description The // are low on-resistance, low-voltage, quad, single-pole/single-throw (SPST) analog switches that operate from a single +1.V to +3.V supply. These devices have fast switching
More informationON SWITCH NONE COM-NO0 COM-NO1 COM-NO2 COM-NO3 ADDA ADDB X = DON T CARE N.C. = NO CONNECT
9-224; Rev ; /8 Low-Voltage, 6, 4: Analog Multiplexer in QFN General Description The MAX474 low-voltage, 4-channel analog multiplexer operates from a single +.8V to +.V supply. The MAX474 features break-before-make
More informationMAX4680CWE. Pin Configurations/Functional Diagrams/Truth Tables N01 N.C. COM1 V- MAX4690 COM2 IN2 N.C. NO2 SSOP/SO/DIP SWITCH 2 ON OFF 1 OFF
19-1513; Rev ; 7/99 General Description The dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to.3ω max and is flat (.3Ω max) over the specified signal
More information20Ω, 300MHz Bandwidth, Dual SPDT Analog Switch in UCSP
9-2626; Rev ; /2 2, 3MHz Bandwidth, Dual SPDT Analog General Description The low-voltage, low on-resistance (R ON ), dual single-pole/double throw (SPDT) analog switch operates from a single +.8V to +5.5V
More information5Ω, Quad, SPST, CMOS Analog Switches
9-393; Rev ; 8/99 5Ω, Quad, SPST, CMOS Analog Switches General Description The quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to.5ω max and is flat (.5Ω max)
More information0.8Ω, Low-Voltage, 4-Channel Analog Multiplexer
General Description The is a low on-resistance, low-voltage, 4-channel CMOS analog multiplexer that operates from a single 1.6V to 3.6V supply. This device has fast switching speeds (t ON = 25ns, t OFF
More informationMAX4661CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NC2 V- NO2 MAX4662 NO3 COM3 IN3 SSOP/SO/DIP MAX4662 LOGIC SWITCH OFF
9-56; Rev ; 7/99 General Description The // quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat (.5Ω max) over the specified signal
More information0.6Ω, Low-Voltage, Single-Supply, Dual SPDT Analog Switch
.6Ω, Low-Voltage, Single-Supply, Dual SPDT General Description The is a low on-resistance, low-voltage, dual single-pole/double throw (SPDT) analog switch that operates from a single 1.6V to 4.2V supply.
More informationMAX4740ETE+ MAX4740EVE+ MAX4740HETE+ MAX4740HEVE+ TOP VIEW INTERNAL SPEAKER EXTERNAL HEADPHONES COM4 EXTERNAL HEADPHONES
19-558; Rev 1; 11/7 Quad SPDT Audio Switches General Description The low on-resistance (.61Ω typ) analog switches operate from a single 1.6V to 5.5V supply. The are quad, singlepole, double-throw (SPDT)
More informationMAX4723EUA -40 C to +85 C 8 µmax MAX4722 MAX4723. Pin Configurations/Functional Diagrams/Truth Tables C NC1 IN1 UCSP. Maxim Integrated Products 1
9-2632; Rev ; /2 4.5Ω Dual SPST Analog Switches in UCSP General Description The MAX472/MAX4722/ low-voltage, low onresistance (R ON ), dual single-pole/single throw (SPST) analog switches operate from
More informationPA R T NC1 A0 V+ EN CONTROL LOGIC A0 NC1 EN 1 MAX4674 COM2 QFN. Maxim Integrated Products 1
9-78; Rev 3; 2/6 3V/5V, 4Ω, Wideband Quad 2: Analog Multiplexer General Description The is a low-voltage CMOS analog switch containing four 2: multiplexers/demultiplexer. When powered from a single +5V
More informationMAX4601CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NO2 MAX4602 NO3 COM3 IN3 SSOP/SO/DIP MAX4602 LOGIC SWITCH OFF
9-396; Rev ; /99 2.5Ω, Quad, SPST, General Description The MAX46/MAX462/MAX463 quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat
More information50Ω, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP
9-266; Rev 3; /2 5Ω, Low-Voltage, Quad SPST/Dual SPDT Analog General Description The low-voltage, quad single-pole single-throw (SPST)/dual single-pole/double-throw (SPDT) analog switches operate from
More informationLow-Voltage, Dual SPDT, Audio Clickless Switches With Negative Rail Capability
19-563; Rev ; 5/6 Low-Voltage, Dual SPDT, Audio Clickless General Description The dual SPDT (single pole/double throw) audio switches feature negative signal capability that allows signals as low as -
More informationMAX4684/MAX4685 OFF ON 1 SWITCHES SHOWN FOR LOGIC "0" INPUT
19-1977; Rev 4; 1/9.5Ω/.8Ω Low-Voltage, Dual SPDT General Description The low on-resistance (R ON ), lowvoltage, dual single-pole/double-throw (SPDT) analog switches operate from a single +1.8V to +5.5V
More information0.5Ω, Low-Voltage, Single-Supply SPST Analog Switches MAX4626/MAX4627/ MAX4628. General Description. Benefits and Features. Ordering Information
.5Ω, Low-Voltage, Single-Supply General Description The // are low-on-resistance, low-voltage, single-pole/single-throw (SPST) analog switches that operate from a +.8V to +5.5V single supply. The is normally
More informationTOP VIEW COM2. Maxim Integrated Products 1
19-3472; Rev ; 1/4 Quad SPST Switches General Description The quad single-pole/single-throw (SPST) switch operates from a single +2V to +5.5V supply and can handle signals greater than the supply rail.
More informationPART MAX4631ESE MAX4633CPE MAX4632EPE MAX4633MJE MAX4632CSE MAX4632CPE MAX4632ESE MAX4632MJE MAX4633CSE MAX4633ESE MAX4633EPE
19-1515; Rev ; 7/99 Fault-Protected, High-oltage, General Description The high-voltage, dual analog switches are pin compatible with the industry-standard DG41/DG43/DG45. They upgrade the existing devices
More information10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches
19-218; Rev 1; 9/8 1Ω, Quad, SPST, +3V Logic-Compatible General Description Maxim s analog switches feature low on-resistance (1Ω max) and 1.5Ω onresistance matching between channels. These switches are
More informationLow-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
19-563; Rev 1; 11/6 Low-Voltage, Dual SPDT, Audio Clickless General Description The MAX4744/MAX4744H/MAX4745/MAX4745H/ dual SPDT (single-pole/double-throw) audio switches feature negative signal capability
More information*EP = exposed pad TOP VIEW COM N.C. GND. Maxim Integrated Products 1
9-984; Rev ; 5/ High-urrent, Ω, SPST, MOS General Description Maxim s are medium-voltage MOS analog switches with low on-resistance of Ω max, specifically designed to handle large switch currents. With
More informationMAX4734 LOGIC NO1 GND. Maxim Integrated Products 1
9-238; Rev ; 5/4.8Ω, Low-Voltage, 4-Channel General Description The is a low on-resistance, low-voltage, 4- channel CMOS analog multiplexer that operates from a single.6v to 3.6V supply. This device has
More informationMAX4737/MAX4738/ MAX Ω Quad SPST Analog Switches in UCSP. General Description. Benefits and Features. Applications
General Description The MAX77/MAX78/ low-voltage, low onresistance (R ), quad single-pole/single throw (SPST) analog switches operate from a single +.8V to +5.5V supply. These devices are designed for
More informationQuad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch
19-1452; Rev 1; 1/99 Quad, Rail-to-Rail, Fault-Protected, General Description The quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333
More informationSGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM2267 is a dual single-pole/double-throw (SPDT) analog switch that is designed to operate from a single +1.8V to +4.2V power supply. Targeted applications include battery powered
More informationDual SPDT Negative Rail Analog Switches with ±VCC Capability
19-4244; Rev 1; 12/8 EVALUATION KIT AVAILABLE Dual SPDT Negative Rail Analog Switches General Description The MAX1454/MAX1455/MAX1455A/MAX1456 dual single-pole/double-throw (SPDT) audio switches feature
More informationQuad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch
19-1452; Rev 1; 1/99 Quad, Rail-to-Rail, Fault-Protected, General Description The quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333
More informationLow-RON, Dual-SPST/Single-SPDT Clickless Switches with Negative Rail Capability
9-3775; Rev 2; 5/6 Low-RON, Dual-SPST/Single-SPDT Clickless General Description The switches feature negative signal capability that allows signals below ground to pass through without distortion. The
More informationS 500µA (typ) Supply Current S TSSOP 16-Pin Package S -40 C to +85 C Ambient Temperature Range S Functionally Compatible to DG411, DG412, and DG413
19-572; Rev ; 12/1 Quad SPST +7V Analog Switches General Description The are analog switches with a low on-resistance of 1I (max) that conduct equally well in both directions. All devices have a rail-to-rail
More informationSGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.
More informationPrecision, 8-Channel/Dual 4-Channel, Low-Voltage, CMOS Analog Multiplexers
9-299; Rev. 6; 6/7 Precision, 8-Channel/Dual 4-Channel, General Description The precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than Ω), which is matched to within
More informationMaxim Integrated Products 1
9-362; Rev 3; 6/7 Quad, SPST Analog Switch General Description The quad analog switch features on-resistance matching (4Ω max) between switches and guarantees on-resistance flatness over the signal range
More informationLow-Voltage Single-Supply, SPDT Analog Switch in SC-70
Low-oltage Single-Supply, SPDT Analog Switch in SC-7 DESCRIPTION The DG499 is a cost effective upgrade to other types of 499 low-voltage, single-pole/double-throw analog switches available in the industry
More informationSGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3003 is a single, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single +1.8V to +5.5V supply. Targeted
More informationSGM48754 Quad SPST CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage
More informationEVALUATION KIT AVAILABLE 5.0Gbps PCI Express Passive Switches
19-77; Rev 2; 5/9 EVALUATION KIT AVAILABLE 5.Gbps PCI Express Passive Switches General Description The high-speed passive switches route PCI Express (PCIe) data between two possible destinations. The MAX4888A
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4462 is a dual, high-speed, low-voltage, double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single 1.8V to 5.5V power supply. It features high-bandwidth
More informationMAX V Capable, Low-R ON, Beyond-the-Rails DPDT Analog Switch
Click here for production status of specific part numbers. MAX2327 12V Capable, Low-R ON, General Description The MAX2327 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches
More informationMAX4852 MAX4852H NC1 COM1 NO1 IN1 IN2 NC2 COM2 NO2. Maxim Integrated Products 1
19-7; Rev ; 7/ Dual SPDT Analog Switches with General Description The family of dual SPDT (single-pole/double-throw) switches operate from a single +V to +.V supply and can handle signals greater than
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More informationHigh-Bandwidth T1/E1 Dual-SPDT Switches/ 4:1 Muxes
19-3915; Rev 1; 1/7 High-Bandwidth Dual-SPDT Switches/ General Description The / high-bandwidth, low-on-resistance analog dual SPDT switches/4:1 multiplexers are designed to serve as integrated protection
More informationUM Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN General Description. Applications
0.5Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN10 1.8 1.4 General Description The UM5223 is a low on-resistance (R ON ), dual single-pole/double-throw (SPDT) analog switch operates from
More informationMAX14777 Quad Beyond-the-Rails -15V to +35V Analog Switch
General Description The quad SPST switch supports analog signals above and below the rails with a single 3.0V to 5.5V supply. The device features a selectable -15V/+35V or -15V/+15V analog signal range
More informationSGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70
GENERAL DESCRIPTION The SGM3167 is a single, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switches designed to operate from a single 1.8V to 5.5V supply. It features high-bandwidth (600MHz)
More informationPrecision, 4-Channel/Dual 2-Channel, Low-Voltage, CMOS Analog Multiplexers
9-7; Rev. ; /98 Precision, 4-Channel/Dual 2-Channel, General Description The AX48/AX49 precision, monolithic, COS analog multiplexers (muxes) offer low on-resistance (less than ), which is matched to within
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4461 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationPI5A121/PI5A122/PI5A124
es Features Single-Supply Operation (+V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ. with 5V supply) Minimizes Distortion and Error Voltages On-Resistance Flatness, Ω typ.
More informationPART MAX4584EUB MAX4585EUB TOP VIEW
19-1521; Rev ; 8/99 General Description The serial-interface, programmable switches are ideal for multimedia applicatio. Each device contai one normally open (NO) single-pole/ single-throw (SPST) switch
More informationLow-Voltage, 1.8kHz PWM Output Temperature Sensors
19-266; Rev 1; 1/3 Low-Voltage, 1.8kHz PWM Output Temperature General Description The are high-accuracy, low-power temperature sensors with a single-wire output. The convert the ambient temperature into
More informationSingle LVDS/Anything-to-LVPECL Translator
9-2808; Rev 0; 4/03 Single LVDS/Anything-to-LVPECL Translator General Description The is a fully differential, high-speed, anything-to-lvpecl translator designed for signal rates up to 2GHz. The s extremely
More informationSGM Ω, Low Voltage Quad, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power
More informationPrecision, Low-Power, 6-Pin SOT23 Temperature Sensors and Voltage References
19-2457; Rev 2; 11/03 Precision, Low-Power, 6-Pin SOT23 General Description The are precise, low-power analog temperature sensors combined with a precision voltage reference. They are ideal for applications
More informationPI5A4684. Chip Scale Packaging, Dual SPDT Analog Switch. Features. Description. Pin Configuration/ Block Diagram (top view) CSP.
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.5Ω. Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5V min. High Off Isolation:
More informationSGM3717 4Ω, 400MHz Bandwidth, Dual, SPDT Negative Signal Handling Analog Switch
Preliminary datasheet SGM3717 GENERAL DESCRIPTION The SGM3717 is a dual, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switch designed to operate from a single +2.5V to +5.0V supply. It features
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG9411 DESCRIPTION The DG9411 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection
New Product DG/DG1 Sub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection DESCRIPTION The DG/DG1 are low-voltage single single-pole/ double-throw monolithic CMOS analog switches. Designed
More informationUltra-Small, Low-RON, Beyond-the-Rails DPDT Analog Switches
EVALUATION KIT AVAILABLE MAX14689 General Description The MAX14689 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches feature Beyond-the-Rails capability that allows
More information0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854
.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 FEATURES.8 Ω typical on resistance Less than 1 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability:
More information3.5Ω/7Ω Quad SPST Switches with Over-Rail Signal Handling
19-71; Rev ; 1/.5Ω/7Ω Quad SPST Switches with Over-Rail General Description The MAX851/MAX851H/MAX85/MAX85H family of quad single-pole/single-throw (SPST) switches operates from a single +2V to +5.5V supply
More informationLow-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
9-352; Rev 2; /6 Low-Voltage, Dual SPDT, Audio Clickless General Description The dual SPDT (single-pole/double-throw) switches feature negative signal capability that allows signals below ground to pass
More information6500V/µs, Wideband, High-Output-Current, Single- Ended-to-Differential Line Drivers with Enable
99 Rev ; /99 EVALUATION KIT AVAILABLE 65V/µs, Wideband, High-Output-Current, Single- General Description The // single-ended-todifferential line drivers are designed for high-speed communications. Using
More informationBCT4699ETE. Applications. Ordering Information. December, 2013, REV1.1
BCT4699 General Description The BCT4699 is configured as a quad-spdt switch with two common control inputs. Each digital input controls two pairs of SPDT switches. The switches are fully bi-directional,
More informationMAX4852 MAX4852H NC1 COM1 NO1 IN1 IN2 NC2 COM2 NO2. Maxim Integrated Products 1
19-7; Rev ; 7/ Dual SPDT Analog Switches with General Description The MAX8/MAX8H/MAX8/MAX8H family of dual SPDT (single-pole/double-throw) switches operate from a single +V to +.V supply and can handle
More informationPI5A23159 Low Voltage Dual SPDT 0.8Ω Analog Switch
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.8 at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Overvoltage Tolerance: 5.5V(Min) Fast Transition Speed:
More informationPI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.
Precision, Wide-Bandwidth Quad SPDT Analog Switch Features Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and
More informationCMOS, ±5 V/+5 V, 4 Ω, Single SPDT Switches ADG619/ADG620
CMOS, ± V/+ V, 4 Ω, Single SPDT Switches ADG619/ADG62 FEATURES 6. Ω (maximum) on resistance.8 Ω (maximum) on-resistance flatness 2.7 V to. V single supply ±2.7 V to ±. V dual supply Rail-to-rail operation
More information0.45, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability
5, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability DESCRIPTION The is a dual SPDT low on-resistance switch designed to from a single 1.6 V to 5.5 V power supply. It is a bi-directional
More informationSGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
More information1.0V Micropower, SOT23, Operational Amplifier
19-3; Rev ; 1/ 1.V Micropower, SOT3, Operational Amplifier General Description The micropower, operational amplifier is optimized for ultra-low supply voltage operation. The amplifier consumes only 9µA
More informationLow-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz
19-3530; Rev 0; 1/05 Low-Jitter, 8kHz Reference General Description The low-cost, high-performance clock synthesizer with an 8kHz input reference clock provides six buffered LVTTL clock outputs at 35.328MHz.
More informationDG2535/DG Ω Low-Voltage Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS APPLICATIONS
0.35-Ω Low-Voltage Dual SPDT Analog Switch DG2535/DG2536 DESCRIPTION The DG2535/DG2536 is a sub Ω (0.35 Ω at 2.7 V) dual SPDT analog switches designed for low voltage applications. The DG2535/DG2536 has
More informationMP2735/MP2736 Low-Voltage 0.45Ω Dual SPDT Analog Switches
The Future of Analog IC Technology GENERAL DESCRIPTION The MP2735/MP2736 are low voltage, low onresistance, dual single-pole, double-throw (SPDT) monolithic CMOS analog switches designed for high performance
More informationPower-off Isolation, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Power-off Isolation,,. V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for. V to 5.5 V operation with a single
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44599 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More information3 V/5 V CMOS 0.5 Ω SPDT/2:1 Mux in SC70 ADG849
3 V/5 V CMOS.5 Ω SPT/2: Mux in SC7 AG849 FEATURES Ultralow on-resistance:.5 Ω typical.8 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion:.3 Ω typical.24 Ω maximum RON flatness High
More informationIF Digitally Controlled Variable-Gain Amplifier
19-2601; Rev 1; 2/04 IF Digitally Controlled Variable-Gain Amplifier General Description The high-performance, digitally controlled variable-gain amplifier is designed for use from 0MHz to 400MHz. The
More informationHigh-Accuracy, 76V, High-Side Current Monitors in SOT23 MAX4007/MAX4008. Features
19-2743; Rev 3; 4/07 High-Accuracy, 76V, High-Side General Description The precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications.
More information1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Dual SPDT Switches ADG1636
FEATURES Ω typical on resistance.2 Ω on resistance flatness ±3.3 V to ±8 V dual supply operation 3.3 V to 6 V single supply operation No VL supply required 3 V logic-compatible inputs Rail-to-rail operation
More informationFSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation
December 2013 FSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation Features Low I CC When the S Input is Lower Than V CC Power-Off Isolation (V CC=0 V) 1 Ω On Resistance (R ON) for 4.5 V
More informationPrecision Quad SPDT Analog Switch
Precision Quad SPDT Analog Switch DESCRIPTION The consist of four independently controlled single-pole double-throw analog switches. These monolithic switch is designed to control analog signals with a
More information10-Bit, Low-Power, Rail-to-Rail Voltage-Output Serial DAC in SOT23
19-195; Rev 1; 1/4 1-Bit, Low-Power, Rail-to-Rail General Description The is a small footprint, low-power, 1-bit digital-to-analog converter (DAC) that operates from a single +.7V to +5.5V supply. The
More informationSGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
More information0.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch
.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION The DG2523 and DG2524 are four-channel single-pole double-throw (SPDT) analog switches. The DG2523 has two control inputs
More informationTOP VIEW. Maxim Integrated Products 1
19-1812; Rev ; 1/1 5mA, Low-Dropout, General Description The low-dropout linear regulator operates from a +2.5V to +5.5V supply and delivers a guaranteed 5mA load current with low 12mV dropout. The high-accuracy
More informationPART MXD1013C/D MXD1013PD MXD1013UA MXD1013SE PART NUMBER EXTENSION (MXD1013 )
19-094; Rev 0; /97 -in-1 Silicon Delay Line General Description The contai three independent, monolithic, logic-buffered delay lines with delays ranging from 10 to 200. Nominal accuracy is ±2 for a 10
More information-40 C to +85 C. AABN -40 C to +85 C 8 SO -40 C to +85 C 6 SOT23-6 AABP. Maxim Integrated Products 1
19-13; Rev 2; 9/ Low-Cost, SOT23, Voltage-Output, General Description The MAX173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage output
More informationINPUTS V 1 V 2 OSC IN V 3 V 4
19-0391; Rev 2; 9/08 Low-Voltage, Quad, SPDT, General Description The is a precision, low-voltage, quad, singlepole/double-throw (SPDT) analog switch. The four independent switches operate with bipolar
More information±15kV ESD-Protected, 1Mbps, 1µA RS-232 Transmitters in SOT23-6
19-164; Rev 1; 3/ ±15k ESD-Protected, bps, 1 General Description The / single RS-3 transmitters in a SOT3-6 package are for space- and cost-constrained applications requiring minimal RS-3 communications.
More informationPower-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Power-off Protection,,. V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for. V to 5.5 V operation with a single
More information