Low-Voltage, High-Speed, Quad, SPST CMOS Analog Switches
|
|
- Darlene McCoy
- 6 years ago
- Views:
Transcription
1 9-5; Rev ; 7/99 Low-Voltage, High-Speed, Quad, SPST General Description The quad, low-voltage, high-speed, single-pole/single-throw (SPST) analog switches are pin compatible with the industry-standard 74HC466/MAX46 analog switches. On-resistance (Ω max) is matched between switches to Ω max and is flat (Ω max) over the specified signal range. Each switch handles to analog signal levels. Maximum off-leakage current is only na at and 6nA at T A = +85 C. The MAX464 has four normally open (NO) switches, and the MAX465 has four normally closed (NC) switches. The MAX466 has two NO switches and two NC switches. These CMOS switches operate from a single +V to +5.5V supply. All digital inputs have +.8V and +.4V logic thresholds, ensuring TTL/CMOSlogic compatibility when using a single +5V supply. Applications Battery-Operated Equipment Audio/Video Signal Routing Low-Voltage Data-Acquisition Systems Sample-and-Hold Circuits Communication Circuits Features Fast Switching Times ns ton, ns toff Pin Compatible with Industry-Standard 74HC466/MAX46 Guaranteed On-Resistance Ω max (+5V supply) Ω max (+3V supply) Guaranteed Match Between Channels (Ω max) Guaranteed Flatness Over Signal Range (Ω max) <6nA Off-Leakage Current Over Temperature (T A = +85 C) Rail-to-Rail Signal Handling TTL/CMOS-Logic Compatible PART MAX464CUD MAX464CSD MAX464CPD Ordering Information TEMP. RANGE PIN-PACKAGE C to +7 C 4 TSSOP C to +7 C 4 Narrow SO C to +7 C 4 Plastic DIP MAX464EUD -4 C to +85 C 4 TSSOP MAX464ESD -4 C to +85 C 4 Narrow SO MAX464EPD -4 C to +85 C 4 Plastic DIP Ordering Information continued at end of data sheet. Pin Configurations/Truth Tables TOP VIEW MAX464 MAX465 MAX466 NO 4 NC 4 NO 4 COM 3 IN COM 3 IN COM 3 IN NO 3 IN4 NC 3 IN4 NC 3 IN4 COM 4 NO4 COM 4 NC4 COM 4 NC4 IN 5 COM4 IN 5 COM4 IN 5 COM4 IN3 6 9 COM3 IN3 6 9 COM3 IN3 6 9 COM3 7 8 NO3 7 8 NC3 7 8 NO3 TSSOP/SO/DIP TSSOP/SO/DIP TSSOP/SO/DIP INPUT SWITCH STATE INPUT SWITCH STATE INPUT NO, NO3 NC, NC4 LOW HIGH OFF ON LOW HIGH ON OFF LOW HIGH OFF ON ON OFF Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd. Maxim Integrated Products For free samples & the latest literature: or phone For small orders, phone
2 ABSOLUTE MAXIMUM RATINGS (Voltages referenced to ), IN_...-.3V to +6V COM_, NO_, NC_ (Note )...-.3V to ( +.3V) Continuous Current (any terminal)...±75ma Peak Current (NO_, NC_, COM_) (pulsed at ms, % duty cycle)...±ma Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS Single +5V Supply ( = +5V ±%, V IN_H =.4V, V IN_L =.8V, T A = T MIN to T MAX, unless otherwise noted.) (Note ) Analog Signal Range (Note 3) V COM_, V NO_, V NC_ Continuous Power Dissipation (T A = +7 C) 4-Pin TSSOP (derate 6.3mW/ C above +7 C)...5mW 4-Pin Narrow SO (derate 8.mW/ C above +7 C)..64mW 4-Pin Plastic DIP (derate.mw/ C above +7 C)...8mW Operating Temperature Ranges MAX46_C... C to +7 C MAX46_E...-4 C to +85 C Storage Temperature Range C to +5 C Lead Temperature (soldering, sec)...+3 C Note : Signals on NO_, NC_, or COM_ exceeding or are clamped by internal diodes. Limit forward-diode current to maximum current rating. PARAMETER ANALOG SWITCH SYMBOL CONDITIONS MIN TYP MAX = 4.5V, 8 On-Resistance R ON I COM_ = ma, Ω V NO_ = V NC_ = 3V T A = T MIN to T MAX 3 UNITS V On-Resistance Match Between Channels (Note 4) R ON = 4.5V, I COM_ = ma, V NO_ = V NC_ = 3V. T A = T MIN to T MAX. Ω On-Resistance Flatness (Note 5) R FLAT(ON) = 4.5V; I COM_ = ma; V NO_ = V NC_ = 3V, V, V T A = T MIN to T MAX.3. Ω NO_ or NC_ Off-Leakage Current (Note 6) I NO(OFF) = 5.5V; V COM_ = V, 4.5V; V NO_ = 4.5V, V T A = T MIN to T MAX na COM_ Off-Leakage Current (Note 6) I COM(OFF) = 5.5V; V COM_ = V, 4.5V; V NO_ = V NC_ = 4.5V, V T A = T MIN to T MAX na COM_ On-Leakage Current (Note 6) I COM(ON) = 5.5V; V COM_ = V, 4.5V; V NO_ = V NC_ = V, 4.5V, or floating T A = T MIN to T MAX -. - na
3 ELECTRICAL CHARACTERISTICS Single +5V Supply (continued) ( = +5V ±%, V IN_H =.4V, V IN_L =.8V, T A = T MIN to T MAX, unless otherwise noted.) (Note ) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS LOGIC INPUT Input Current with Input Voltage High Input Current with Input Voltage Low I IN_H V IN_ =.4V -.3 na I IN_L V IN_ =.8V -.3 na Input Voltage High V IN_H.4 V Input Voltage Low V IN_L.8 V SWITCH DYNAMIC 5 Turn-On Time (Note 3) t ON V COM_ = 3V, Figure T A = T MIN to T MAX 4.5 Turn-Off Time (Note 3) t OFF V COM_ = 3V, Figure ns T A = T MIN to T MAX Signal = dbm, Figure 4, 5Ω in and out, On-Channel Bandwidth BW 7 MHz Signal = dbm, Figure 4, 5Ω in and out, Charge Injection Q 6.5 pc R L = 5Ω, f = khz, Figure 4, Off-Isolation (Note 7) V ISO -85 db Crosstalk (Note 8) V CT R L = 5Ω, f = khz, Figure 5, -96 db NO_ or NC_ Capacitance C (OFF) f = MHz, Figure 6, 5 pf COM_ Off-Capacitance C COM(OFF) f = MHz, Figure 6, 5 pf COM_ On-Capacitance C COM(ON) f = MHz, Figure 6, pf Total Harmonic Distortion THD 6Ω IN and OUT, f = Hz to khz, Vp-p,.34 % POWER SUPPLY Power-Supply Range Power-Supply Current 5.5 V I+ V IN = or, all switches on or off -. µa ns 3
4 ELECTRICAL CHARACTERISTICS Single +3.3V Supply ( = +3.3V ±%, V IN_H =.4V, V IN_L =.5V, T A = T MIN to T MAX, unless otherwise noted.) (Note ) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS ANALOG SWITCH Analog Signal Range (Note 3) V COM_, V NO_, V V NC_ = 3V, 8 On-Resistance R ON I NO = ma, V COM_ =.5V T A = T MIN to T MAX 5 On-Resistance Match Between Channels (Note 4) NO_ or NC_ Off-Leakage Current (Notes 3, 6) COM_ Off-Leakage Current (Notes 3, 6) COM_ On-Leakage Current (Notes 3, 6) LOGIC INPUT Input Current with Input Voltage High = 3V,.5.5 R ON I COM_ = ma, V NO_ = V NC_ =.5V T A = T MIN to T MAX = 3.6V; -. I NO(OFF) V COM_ = V, 3V; V NO_ = V NC_ = 3V, V T A = T MIN to T MAX - = 3.6V; -. I COM(OFF) V COM_ = V, 3V; V NO_ = V NC_ = 3V, V T A = T MIN to T MAX - = 3.6V; -. V COM_ = V, 3V; I COM(ON) V NO_ = V NC_ = V, 3V, or floating T A = T MIN to T MAX - I IN_H V IN_ = V -.3 na Input Current with Input Voltage Low I IN_L V IN_ =.8V -.3 na Input Voltage High V IN_H. V Input Voltage Low V IN_L.8 V SWITCH DYNAMIC (Note 3) Turn-On Time t ON V COM_ =.5V, 6 5 Figure T A = T MIN to T MAX ns Turn-Off Time t OFF V COM_ =.5V, 4 Figure T A = T MIN to T MAX 5 ns Charge Injection Q C L = nf, V GEN =, R GEN =, 6.5 pc POWER SUPPLY Power-Supply Current I+ = 3.6V, V IN = or, all channels on or off -. µa Ω Ω na na na 4
5 ELECTRICAL CHARACTERISTICS Single +.5V Supply ( = +.5V, V INH =.7V CC, V INL =.5V, T A = T MIN to T MAX, unless otherwise noted.) (Note ) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS ANALOG SWITCH Analog Signal Range (Note 3) COM_ to NO_ or NC_ On-Resistance SWITCH DYNAMIC (Note 3) V COM_, V NO_, V V NC_ =.5V, 3 6 R ON I COM_ = ma, V NO =.V T A = T MIN to T MAX Turn-On Time t ON V NO_ or V NC_ = V, 6.5 ns Turn-Off Time t OFF V NO_ or V NC_ = V,.8 ns Note : The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in this data sheet. Note 3: Guaranteed by design. Note 4: R ON = R ON (max) - R ON (min). Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal range. Note 6: Leakage parameters are % tested at maximum-rated hot temperature and guaranteed by correlation at +5 C. Note 7: Off-Isolation = log (V COM_ / V NO_ ), V COM_ = output, V NO_ = input to off switch. Note 8: Between any two switches. Ω 5
6 Typical Operating Characteristics ( = +5V, =,, unless otherwise noted.) ON-RESISTANCE (Ω) ON-LEAKAGE (pa) ON-RESISTANCE vs. V COM_ = V = 3V V COM_ (V) = 5V ON-LEAKAGE vs. TEMPERATURE V COM_ =.5V V NC_ = FLOATING TEMPERATURE ( C) MAX464-6 toc MAX464-6 toc4 ON-RESISTANCE (Ω) I+ (na) ON-RESISTANCE vs. V COM_ AND TEMPERATURE T A = +7 C T A = +85 C T A = -4 C V COM_ (V) T A = C SUPPLY CURRENT vs. TEMPERATURE TEMPERATURE ( C) MAX644-6 toc MAX464-6 toc5 OFF-LEAKAGE (pa) CHARGE INJECTION (pc).. OFF-LEAKAGE vs. TEMPERATURE V COM_ =.5V V NO_ = 4.5V TEMPERATURE ( C) CHARGE INJECTION vs. V COM_ V COM_ (V) MAX464-6 toc3 MAX464-6 toc6 VIN_H (V) V IN_H INPUT LOGIC HIGH THRESHOLD vs (V) MAX464-6 toc7 GAIN (db) FREQUENCY RESPONSE - IN = OUT = 5Ω ON-LOSS - -3 ON-PHASE OFF-ISOLATION k k M M M 5M FREQUENCY (Hz) MAX464-6 toc PHASE (degrees) 6
7 Typical Operating Characteristics (continued) ( = +5V, =,, unless otherwise noted.) THD + N (%) TOTAL HARMONIC DISTORTION PLUS NOISE vs. FREQUENCY.5.45 = +V, Vp-p SIGNAL = +5V, Vp-p SIGNAL.5 = +.5V, Vp-p SIGNAL..5 = +3V, Vp-p SIGNAL. = +3.3V, Vp-p SIGNAL.5 = +5V, Vp-p SIGNAL 4k 8k k 6k k FREQUENCY (Hz) PIN MAX464 MAX465 MAX466, 3, 8 MAX464-6 toc9 NAME SWITCHING TIMES (ns) SWITCHING TIME vs. VOLTAGE (V) t ON t OFF FUNCTION R L = 3Ω C L = 35pF V COM =.5V MAX464/5/6 toc Pin Description, 8 NO NO3 Analog Switch Normally Open Terminal (bidirectional), 3, 8 NC NC3 Analog Switch Normally Closed Terminal (bidirectional) 3 NC Analog Switch Normally Closed Terminal (bidirectional), 4, 9,, 4, 9,, 4, 9, COM COM4 Analog Switch Common Terminal (bidirectional) 5, 6,, 3 5, 6,, 3 5, 6,, 3 IN IN4 Logic Control Inputs Ground NC4 Analog Switch Normally Closed Terminal (bidirectional) NO4 Analog Switch Normally Open Terminal (bidirectional) Positive Supply Voltage 7
8 Applications Information Power-Supply Sequencing and Overvoltage Protection Do not exceed the absolute maximum ratings because stresses beyond the listed ratings may cause permanent damage to the devices. Proper power-supply sequencing is recommended for all CMOS devices. Always apply before applying analog signals or logic inputs, especially if the analog or logic signals are not current limited. If this sequencing is not possible, and if the analog or logic inputs are not current limited to ma, add a small-signal diode (D) as shown in Figure. If the analog signal can dip below, add D. Adding protection diodes reduces the analog signal range to a diode drop (about.7v) below (for D), and to a diode drop above ground (for D). Leakage is unaffected by adding the diodes. On-resistance increases by a small amount at low supply voltages. Maximum supply voltage () must not exceed 6V. Adding protection diodes causes the logic thresholds to be shifted relative to the power-supply rails. This can be significant when low supply voltages (+5V or less) are used. With a +5V supply, TTL compatibility is not guaranteed when protection diodes are added. Driving IN and IN all the way to the supply rails (i.e., to a V g NO_ POSITIVE SUPPLY COM_ diode drop higher than the pin, or to a diode drop lower than the pin) is always acceptable. Protection diodes D and D also protect against some overvoltage situations. With Figure s circuit, if the supply voltage is below the absolute maximum rating, and if a fault voltage up to the absolute maximum rating is applied to an analog signal pin, no damage will result. D D MAX464 MAX465 MAX466 Figure. Overvoltage Protection Using Two External Blocking Diodes Test Circuits/Timing Diagrams MAX464 MAX465 MAX466 V COM _ SWITCH INPUT COM_ IN_ NO_, NC_ R L 3Ω SWITCH OUTPUT C L 35pF V OUT LOGIC INPUT V INH t R < ns t F < ns 5% 5% t OFF LOGIC INPUT SWITCH OUTPUT V OUT t ON.9 V UT.9 V OUT C L INCLUDES FIXTURE AND STRAY CAPACITANCE. V OUT = V COM ( R L R L + R ON ) Figure. Switching Time 8
9 MAX464 MAX465 MAX466 V GEN R GEN Figure 3. Charge Injection SIGNAL GENERATOR dbm ANALYZER R L nf COM_ COM_ NO_, NC_ IN_ V IN NO_, NC_ MAX464 MAX465 MAX466 IN_ Test Circuits/Timing Diagrams (continued) C L V IN_L OR V IN_H V OUT V OUT IN SIGNAL GENERATOR dbm ANALYZER OFF V INL OR V INH R L nf ON Q = ( V OUT )(C L ) COM IN NO V OUT NO IN COM OFF MAX464 MAX465 MAX466 5Ω V INL OR V INH Figure 4. Off-Isolation/On-Channel Bandwidth Figure 5. Crosstalk 9
10 CAPACITANCE METER f = MHz Test Circuits/Timing Diagrams (continued) nf COM_ NO_, NC_ Figure 6. Channel Off/On-Capacitance IN_ MAX464 MAX465 MAX466 V INL OR V INH Ordering Information (continued) PART TEMP. RANGE PIN-PACKAGE MAX465CUD MAX465CSD C to +7 C C to +7 C 4 TSSOP 4 Narrow SO MAX465CPD C to +7 C 4 Plastic DIP MAX465EUD -4 C to +85 C 4 TSSOP MAX465ESD -4 C to +85 C 4 Narrow SO MAX465EPD -4 C to +85 C 4 Plastic DIP MAX466CUD C to +7 C 4 TSSOP MAX466CSD C to +7 C 4 Narrow SO MAX466CPD C to +7 C 4 Plastic DIP MAX466EUD -4 C to +85 C 4 TSSOP MAX466ESD -4 C to +85 C 4 Narrow SO MAX466EPD -4 C to +85 C 4 Plastic DIP TRANSISTOR COUNT: 89 Chip Information
11 Package Information TSSOP.EPS
12 Package Information (continued) SOICN.EPS Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, San Gabriel Drive, Sunnyvale, CA Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
MAX4680CWE. Pin Configurations/Functional Diagrams/Truth Tables N01 N.C. COM1 V- MAX4690 COM2 IN2 N.C. NO2 SSOP/SO/DIP SWITCH 2 ON OFF 1 OFF
19-1513; Rev ; 7/99 General Description The dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to.3ω max and is flat (.3Ω max) over the specified signal
More information5Ω, Quad, SPST, CMOS Analog Switches
9-393; Rev ; 8/99 5Ω, Quad, SPST, CMOS Analog Switches General Description The quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to.5ω max and is flat (.5Ω max)
More informationMAX4661CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NC2 V- NO2 MAX4662 NO3 COM3 IN3 SSOP/SO/DIP MAX4662 LOGIC SWITCH OFF
9-56; Rev ; 7/99 General Description The // quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat (.5Ω max) over the specified signal
More informationMAX4601CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NO2 MAX4602 NO3 COM3 IN3 SSOP/SO/DIP MAX4602 LOGIC SWITCH OFF
9-396; Rev ; /99 2.5Ω, Quad, SPST, General Description The MAX46/MAX462/MAX463 quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat
More information2.5Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package
19-242; Rev 1; 2/3 2.5Ω, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +1.8V to +5.5V supply. The / are single-pole/single-throw
More informationQuad, Rail-to-Rail, Fault-Protected, SPST Analog Switches
19-2418; Rev ; 4/2 Quad, Rail-to-Rail, Fault-Protected, General Description The are quad, single-pole/single-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard
More information50Ω, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP
9-266; Rev 3; /2 5Ω, Low-Voltage, Quad SPST/Dual SPDT Analog General Description The low-voltage, quad single-pole single-throw (SPST)/dual single-pole/double-throw (SPDT) analog switches operate from
More information10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches
19-218; Rev 1; 9/8 1Ω, Quad, SPST, +3V Logic-Compatible General Description Maxim s analog switches feature low on-resistance (1Ω max) and 1.5Ω onresistance matching between channels. These switches are
More informationMaxim Integrated Products 1
9-362; Rev 3; 6/7 Quad, SPST Analog Switch General Description The quad analog switch features on-resistance matching (4Ω max) between switches and guarantees on-resistance flatness over the signal range
More information0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches
19-116; Rev ; 1/6.Ω, Low-Voltage, Single-Supply Dual SPST General Description The are low on-resistance, low-voltage, dual single-pole/single-throw (SPST) analog switches that operate from a single +1.6V
More information20Ω, 300MHz Bandwidth, Dual SPDT Analog Switch in UCSP
9-2626; Rev ; /2 2, 3MHz Bandwidth, Dual SPDT Analog General Description The low-voltage, low on-resistance (R ON ), dual single-pole/double throw (SPDT) analog switch operates from a single +.8V to +5.5V
More informationON SWITCH NONE COM-NO0 COM-NO1 COM-NO2 COM-NO3 ADDA ADDB X = DON T CARE N.C. = NO CONNECT
9-224; Rev ; /8 Low-Voltage, 6, 4: Analog Multiplexer in QFN General Description The MAX474 low-voltage, 4-channel analog multiplexer operates from a single +.8V to +.V supply. The MAX474 features break-before-make
More informationPA R T NC1 A0 V+ EN CONTROL LOGIC A0 NC1 EN 1 MAX4674 COM2 QFN. Maxim Integrated Products 1
9-78; Rev 3; 2/6 3V/5V, 4Ω, Wideband Quad 2: Analog Multiplexer General Description The is a low-voltage CMOS analog switch containing four 2: multiplexers/demultiplexer. When powered from a single +5V
More information0.8Ω, Low-Voltage, 4-Channel Analog Multiplexer
General Description The is a low on-resistance, low-voltage, 4-channel CMOS analog multiplexer that operates from a single 1.6V to 3.6V supply. This device has fast switching speeds (t ON = 25ns, t OFF
More informationTOP VIEW COM2. Maxim Integrated Products 1
19-3472; Rev ; 1/4 Quad SPST Switches General Description The quad single-pole/single-throw (SPST) switch operates from a single +2V to +5.5V supply and can handle signals greater than the supply rail.
More informationPin Configurations/Functional Diagrams/Truth Table COM COM GND MAX4644 OFF OFF. Maxim Integrated Products 1
9-7; Rev ; 3/ High-Speed, Low-Voltage, 4Ω, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.8V to +.V. It provides low 4Ω on-resistance
More information0.6Ω, Low-Voltage, Single-Supply, Dual SPDT Analog Switch
.6Ω, Low-Voltage, Single-Supply, Dual SPDT General Description The is a low on-resistance, low-voltage, dual single-pole/double throw (SPDT) analog switch that operates from a single 1.6V to 4.2V supply.
More informationPART MAX4631ESE MAX4633CPE MAX4632EPE MAX4633MJE MAX4632CSE MAX4632CPE MAX4632ESE MAX4632MJE MAX4633CSE MAX4633ESE MAX4633EPE
19-1515; Rev ; 7/99 Fault-Protected, High-oltage, General Description The high-voltage, dual analog switches are pin compatible with the industry-standard DG41/DG43/DG45. They upgrade the existing devices
More informationMAX4740ETE+ MAX4740EVE+ MAX4740HETE+ MAX4740HEVE+ TOP VIEW INTERNAL SPEAKER EXTERNAL HEADPHONES COM4 EXTERNAL HEADPHONES
19-558; Rev 1; 11/7 Quad SPDT Audio Switches General Description The low on-resistance (.61Ω typ) analog switches operate from a single 1.6V to 5.5V supply. The are quad, singlepole, double-throw (SPDT)
More informationPART MAX4503CPA MAX4503CSA. Pin Configurations 1 5 V+ COM N.C. V+ 4 MAX4504 MAX4503 DIP/SO
9-064; Rev ; /07 Low-Voltage, Dual-Supply, SPST, General Description The are low-voltage, dual-supply, single-pole/single-throw (SPST), CMOS analog switches. The is normally open (NO). The is normally
More informationMAX4751/MAX4752/MAX Ω, Low-Voltage, Single-Supply Quad SPST Analog Switches
// General Description The // are low on-resistance, low-voltage, quad, single-pole/single-throw (SPST) analog switches that operate from a single +1.V to +3.V supply. These devices have fast switching
More informationMAX4737/MAX4738/ MAX Ω Quad SPST Analog Switches in UCSP. General Description. Benefits and Features. Applications
General Description The MAX77/MAX78/ low-voltage, low onresistance (R ), quad single-pole/single throw (SPST) analog switches operate from a single +.8V to +5.5V supply. These devices are designed for
More information0.5Ω, Low-Voltage, Single-Supply SPST Analog Switches MAX4626/MAX4627/ MAX4628. General Description. Benefits and Features. Ordering Information
.5Ω, Low-Voltage, Single-Supply General Description The // are low-on-resistance, low-voltage, single-pole/single-throw (SPST) analog switches that operate from a +.8V to +5.5V single supply. The is normally
More informationHigh-Speed, Low-Voltage, 4Ω, Dual SPST CMOS Analog Switches
9-; Rev ; / High-Speed, Low-oltage, Ω, Dual SPST General Description The MAX//MAX are monolithic, dual, single-pole/single-throw (SPST) switches that can operate from a single supply ranging from +. to
More informationPrecision, 8-Channel/Dual 4-Channel, Low-Voltage, CMOS Analog Multiplexers
9-299; Rev. 6; 6/7 Precision, 8-Channel/Dual 4-Channel, General Description The precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than Ω), which is matched to within
More informationMAX4723EUA -40 C to +85 C 8 µmax MAX4722 MAX4723. Pin Configurations/Functional Diagrams/Truth Tables C NC1 IN1 UCSP. Maxim Integrated Products 1
9-2632; Rev ; /2 4.5Ω Dual SPST Analog Switches in UCSP General Description The MAX472/MAX4722/ low-voltage, low onresistance (R ON ), dual single-pole/single throw (SPST) analog switches operate from
More informationMultiplexers/Switches
EVALUATION KIT AVAILABLE / General Description The / are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer () and a double-pole/double-throw (DPDT) switch
More informationTOP VIEW COUT1 COM2. Maxim Integrated Products 1
19-77; Rev ; 7/4.75Ω, Dual SPDT Audio Switch with General Description The dual, single-pole/double-throw (SPDT) switch operates from a single +2V to +5.5V supply and features rail-to-rail signal handling.
More informationMAX4684/MAX4685 OFF ON 1 SWITCHES SHOWN FOR LOGIC "0" INPUT
19-1977; Rev 4; 1/9.5Ω/.8Ω Low-Voltage, Dual SPDT General Description The low on-resistance (R ON ), lowvoltage, dual single-pole/double-throw (SPDT) analog switches operate from a single +1.8V to +5.5V
More informationQuad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch
19-1452; Rev 1; 1/99 Quad, Rail-to-Rail, Fault-Protected, General Description The quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333
More informationPin Configurations/Functional Diagrams/Truth Tables COM SC70-6 SC70-6 PIN 5 5 XYZ NOTE: SC70-5 PACKAGE HAS LETTERING NEAREST PIN 5.
9-359; Rev ; / General Description The MAX76/MAX77 single-pole/single-throw (SPST) switches operate from a single.8v to 5.5V supply. The MAX76 is a normally closed (NC) switch and the MAX77 is the normally
More informationLow-Voltage, Dual SPDT, Audio Clickless Switches With Negative Rail Capability
19-563; Rev ; 5/6 Low-Voltage, Dual SPDT, Audio Clickless General Description The dual SPDT (single pole/double throw) audio switches feature negative signal capability that allows signals as low as -
More informationQuad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch
19-1452; Rev 1; 1/99 Quad, Rail-to-Rail, Fault-Protected, General Description The quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333
More informationFunctional Diagrams, Pin Configurations, and Truth Table
Ω Ω µ With +12V power supply, the PS4066/PS4066A guarantee
More informationPrecision, 4-Channel/Dual 2-Channel, Low-Voltage, CMOS Analog Multiplexers
9-7; Rev. ; /98 Precision, 4-Channel/Dual 2-Channel, General Description The AX48/AX49 precision, monolithic, COS analog multiplexers (muxes) offer low on-resistance (less than ), which is matched to within
More informationS 500µA (typ) Supply Current S TSSOP 16-Pin Package S -40 C to +85 C Ambient Temperature Range S Functionally Compatible to DG411, DG412, and DG413
19-572; Rev ; 12/1 Quad SPST +7V Analog Switches General Description The are analog switches with a low on-resistance of 1I (max) that conduct equally well in both directions. All devices have a rail-to-rail
More informationLow-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
19-563; Rev 1; 11/6 Low-Voltage, Dual SPDT, Audio Clickless General Description The MAX4744/MAX4744H/MAX4745/MAX4745H/ dual SPDT (single-pole/double-throw) audio switches feature negative signal capability
More informationMAX4734 LOGIC NO1 GND. Maxim Integrated Products 1
9-238; Rev ; 5/4.8Ω, Low-Voltage, 4-Channel General Description The is a low on-resistance, low-voltage, 4- channel CMOS analog multiplexer that operates from a single.6v to 3.6V supply. This device has
More information*EP = exposed pad TOP VIEW COM N.C. GND. Maxim Integrated Products 1
9-984; Rev ; 5/ High-urrent, Ω, SPST, MOS General Description Maxim s are medium-voltage MOS analog switches with low on-resistance of Ω max, specifically designed to handle large switch currents. With
More informationSGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.
More informationPI5A121/PI5A122/PI5A124
es Features Single-Supply Operation (+V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ. with 5V supply) Minimizes Distortion and Error Voltages On-Resistance Flatness, Ω typ.
More information16-Channel CMOS Analog Multiplexer. Memory
306 16-Channel CMOS Analog Multiplexer FEATURES: RAD-PAK technology radiation-hardened against natural space radiation Total dose hardness: - > 50 Krad (Si), depending upon space mission Excellent Single
More informationPI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.
Precision, Wide-Bandwidth Quad SPDT Analog Switch Features Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and
More informationThe UM4684 is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage
General Description 0.5Ω Low-Voltage Dual SPDT Analog Switch H CSP10 2.0 1.5 EEUE MSOP10 The is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage applications. The has on-resistance
More informationDual SPDT Negative Rail Analog Switches with ±VCC Capability
19-4244; Rev 1; 12/8 EVALUATION KIT AVAILABLE Dual SPDT Negative Rail Analog Switches General Description The MAX1454/MAX1455/MAX1455A/MAX1456 dual single-pole/double-throw (SPDT) audio switches feature
More informationLow-RON, Dual-SPST/Single-SPDT Clickless Switches with Negative Rail Capability
9-3775; Rev 2; 5/6 Low-RON, Dual-SPST/Single-SPDT Clickless General Description The switches feature negative signal capability that allows signals below ground to pass through without distortion. The
More informationQuad SPST CMOS Analog Switches
9-3960; Rev 3; 6/06 Quad SPST CMOS Analog Switches General Description The are normally open, quad singlepole single-throw (SPST) analog switches. These CMOS switches can be continuously operated with
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More informationPART MAX4584EUB MAX4585EUB TOP VIEW
19-1521; Rev ; 8/99 General Description The serial-interface, programmable switches are ideal for multimedia applicatio. Each device contai one normally open (NO) single-pole/ single-throw (SPST) switch
More informationDG2715, DG2716. Low-Voltage, 0.4 R ON, Single SPST Analog Switch. Vishay Siliconix DESCRIPTION FEATURES BENEFITS APPLICATIONS
DG275, DG276 Low-Voltage, 0.4 R ON, Single SPST Analog Switch DESCRIPTION The DG275, DG276 are low voltage, single supply, dual SPST analog switches. Designed for high performance switching of analog signals,
More informationINPUTS V 1 V 2 OSC IN V 3 V 4
19-0391; Rev 2; 9/08 Low-Voltage, Quad, SPDT, General Description The is a precision, low-voltage, quad, singlepole/double-throw (SPDT) analog switch. The four independent switches operate with bipolar
More informationMAX14777 Quad Beyond-the-Rails -15V to +35V Analog Switch
General Description The quad SPST switch supports analog signals above and below the rails with a single 3.0V to 5.5V supply. The device features a selectable -15V/+35V or -15V/+15V analog signal range
More informationHigh-Bandwidth T1/E1 Dual-SPDT Switches/ 4:1 Muxes
19-3915; Rev 1; 1/7 High-Bandwidth Dual-SPDT Switches/ General Description The / high-bandwidth, low-on-resistance analog dual SPDT switches/4:1 multiplexers are designed to serve as integrated protection
More informationFEATURES DG2538, MSOP-10 V+ 1 V+ COM 1. Top View. Temperature Range Package Part Number
Dual SPST Switches DG, DG8, DG9 DESCRIPTION The DG, DG8, and DG9 are low voltage, precision dual SPST switches that can be operated in a single supply or in a dual supply configuration power supply with
More informationSGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
More informationEVALUATION KIT AVAILABLE 5.0Gbps PCI Express Passive Switches
19-77; Rev 2; 5/9 EVALUATION KIT AVAILABLE 5.Gbps PCI Express Passive Switches General Description The high-speed passive switches route PCI Express (PCIe) data between two possible destinations. The MAX4888A
More informationGuaranteed RFLAT(ON) Over Signal Range. Maxim Integrated Products 1
191362; Rev 2; 6/4 Quad, SPST Analog Switch General Description The quad analog switch features onresistance matching (4Ω max) between switches and guarantees onresistance flatness over the signal range
More information3.5Ω/7Ω Quad SPST Switches with Over-Rail Signal Handling
19-71; Rev ; 1/.5Ω/7Ω Quad SPST Switches with Over-Rail General Description The MAX851/MAX851H/MAX85/MAX85H family of quad single-pole/single-throw (SPST) switches operates from a single +2V to +5.5V supply
More informationMP2735/MP2736 Low-Voltage 0.45Ω Dual SPDT Analog Switches
The Future of Analog IC Technology GENERAL DESCRIPTION The MP2735/MP2736 are low voltage, low onresistance, dual single-pole, double-throw (SPDT) monolithic CMOS analog switches designed for high performance
More informationSGM48754 Quad SPST CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage
More informationSGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch. Features Benefits Applications. Fast Settling Times Reduced Switching Glitches High Precision
DG27 High-Speed Quad Monolithic SPST CMOS Analog Features Benefits Applications Fast ing : ns Low Charge Injection: pc Low r DS(on) : 32 TTL/CMOS Compatible Low Leakage: pa Description Fast Settling Times
More informationSub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection
New Product DG/DG1 Sub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection DESCRIPTION The DG/DG1 are low-voltage single single-pole/ double-throw monolithic CMOS analog switches. Designed
More informationMAX V Capable, Low-R ON, Beyond-the-Rails DPDT Analog Switch
Click here for production status of specific part numbers. MAX2327 12V Capable, Low-R ON, General Description The MAX2327 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches
More informationLow-Voltage Single-Supply, SPDT Analog Switch in SC-70
Low-oltage Single-Supply, SPDT Analog Switch in SC-7 DESCRIPTION The DG499 is a cost effective upgrade to other types of 499 low-voltage, single-pole/double-throw analog switches available in the industry
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch. Features Benefits Applications. Fast Settling Times Reduced Switching Glitches High Precision
DG High-Speed Quad Monolithic SPST CMOS Analog Switch Features Benefits Applications Fast Switching t ON : ns Low Charge Injection: 9 pc Low r DS(on) : 3 TTL Compatible Low Leakage: pa Fast Settling Times
More informationSGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3003 is a single, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single +1.8V to +5.5V supply. Targeted
More informationMAX4852 MAX4852H NC1 COM1 NO1 IN1 IN2 NC2 COM2 NO2. Maxim Integrated Products 1
19-7; Rev ; 7/ Dual SPDT Analog Switches with General Description The family of dual SPDT (single-pole/double-throw) switches operate from a single +V to +.V supply and can handle signals greater than
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch
High-Speed Quad Monolithic SPST CMOS Analog FEATURES BENEFITS APPLICATIONS Fast ing : 55 ns Low Charge Injection: 5 pc Low r DS(on) : 3 TTL/CMOS Compatible Low Leakage: pa Fast Settling Times Reduced ing
More informationPrecision Quad SPDT Analog Switch
Precision Quad SPDT Analog Switch DESCRIPTION The consist of four independently controlled single-pole double-throw analog switches. These monolithic switch is designed to control analog signals with a
More informationSGM Ω, Low Voltage Quad, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power
More informationFEATURES APPLICATIONS
.7, Low On Resistance, + V, +5 V, +3 V, ± 5 V, SPST Switches DESCRIPTION The DG9E and DG9E are monolithic single-pole-single-throw (SPST) analog switches. The DG9E has a normally closed function. The DG9E
More informationBCT4699ETE. Applications. Ordering Information. December, 2013, REV1.1
BCT4699 General Description The BCT4699 is configured as a quad-spdt switch with two common control inputs. Each digital input controls two pairs of SPDT switches. The switches are fully bi-directional,
More informationLow-Charge Injection, 16-Channel, High-Voltage Analog Switches MAX14800 MAX14803
19-4484; Rev 1; 9/09 Low-Charge Injection, 16-Channel, General Description The provide high-voltage switching on 16 channels for ultrasonic imaging and printer applications. The devices utilize HVCMOS
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch
DG27B High-Speed Quad Monolithic SPST CMOS Analog Switch DESCRIPTION The DG27B high speed quad single-pole single-throw analog switch is intended for applications that require low on-resistance, low leakage
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch
High-Speed Quad Monolithic SPST CMOS Analog Fast ing : 55 ns Low Charge Injection: 5 pc Low r DS(on) : 32 TTL/CMOS Compatible Low Leakage: pa Fast Settling Times Reduced ing Glitches High Precision High-Speed
More informationADG1411/ADG1412/ADG1413
.5 Ω On Resistance, ±5 V/+2 V/±5 V, icmos, Quad SPST Switches ADG4/ADG42/ADG43 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4462 is a dual, high-speed, low-voltage, double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single 1.8V to 5.5V power supply. It features high-bandwidth
More informationDG2535/DG Ω Low-Voltage Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS APPLICATIONS
0.35-Ω Low-Voltage Dual SPDT Analog Switch DG2535/DG2536 DESCRIPTION The DG2535/DG2536 is a sub Ω (0.35 Ω at 2.7 V) dual SPDT analog switches designed for low voltage applications. The DG2535/DG2536 has
More informationDG1411E, DG1412E, DG1413E. 1.5 On Resistance, ± 15 V / +12 V / ± 5 V, Quad SPST Switches. Vishay Siliconix.
1.5 On Resistance, ± 15 / +12 / ± 5, Quad SPST Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More information6500V/µs, Wideband, High-Output-Current, Single- Ended-to-Differential Line Drivers with Enable
99 Rev ; /99 EVALUATION KIT AVAILABLE 65V/µs, Wideband, High-Output-Current, Single- General Description The // single-ended-todifferential line drivers are designed for high-speed communications. Using
More informationMonolithic Dual SPST CMOS Analog Switch
Monolithic Dual SPST CMOS Analog Switch DG00B DESCRIPTION The DG00B is a dual, single-pole, single-throw analog switch designed to provide general purpose switching of analog signals. This device is ideally
More informationPrecision Monolithic Quad SPST CMOS Analog Switches
Precision Monolithic Quad SPST CMOS Analog Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
More information8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers
8-Ch/ual 4-Ch High-Performance CMOS Analog Multiplexers ESCRIPTION The G48 is an 8-channel single-ended analog multiplexer designed to connect one of eight inputs to a common output as determined by a
More informationNot Recommended for New Designs
Not Recommended for New Designs The MAX99 was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. A Maxim replacement
More informationLow-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
9-352; Rev 2; /6 Low-Voltage, Dual SPDT, Audio Clickless General Description The dual SPDT (single-pole/double-throw) switches feature negative signal capability that allows signals below ground to pass
More information300MHz, Low-Power, High-Output-Current, Differential Line Driver
9-; Rev ; /9 EVALUATION KIT AVAILABLE 3MHz, Low-Power, General Description The differential line driver offers high-speed performance while consuming only mw of power. Its amplifier has fully symmetrical
More information0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854
.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 FEATURES.8 Ω typical on resistance Less than 1 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability:
More informationFEATURES DG721, TDFN-8 COM 2 7 IN 1 NO 1 1 NO 2. Top View. Device Marking for MSOP-8: 721
.8 V to. V, Dual SPST Switches DG, DG, DG DESCRIPTION The DG, DG and DG are precision dual SPST switches designed to operate from single.8 V to. V power supply with low power dissipation. The DG, DG and
More informationPI5A4684. Chip Scale Packaging, Dual SPDT Analog Switch. Features. Description. Pin Configuration/ Block Diagram (top view) CSP.
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.5Ω. Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5V min. High Off Isolation:
More information0.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch
.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION The DG2523 and DG2524 are four-channel single-pole double-throw (SPDT) analog switches. The DG2523 has two control inputs
More informationSGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM2267 is a dual single-pole/double-throw (SPDT) analog switch that is designed to operate from a single +1.8V to +4.2V power supply. Targeted applications include battery powered
More informationFault-Protected, High-Voltage Single 8-to-1/ Dual 4-to-1 Multiplexers with Output Clamps
9-44; Rev 5; /7 Fault-Protected, High-oltage Single 8-to-/ Dual 4-to- ultiplexers with Output Clamps General Description The AX458/AX459 are 8-to- and dual 4-to- faultprotected multiplexers that are pin
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG9411 DESCRIPTION The DG9411 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low
More informationSGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70
GENERAL DESCRIPTION The SGM3167 is a single, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switches designed to operate from a single 1.8V to 5.5V supply. It features high-bandwidth (600MHz)
More informationSGM3717 4Ω, 400MHz Bandwidth, Dual, SPDT Negative Signal Handling Analog Switch
Preliminary datasheet SGM3717 GENERAL DESCRIPTION The SGM3717 is a dual, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switch designed to operate from a single +2.5V to +5.0V supply. It features
More informationMAX4852 MAX4852H NC1 COM1 NO1 IN1 IN2 NC2 COM2 NO2. Maxim Integrated Products 1
19-7; Rev ; 7/ Dual SPDT Analog Switches with General Description The MAX8/MAX8H/MAX8/MAX8H family of dual SPDT (single-pole/double-throw) switches operate from a single +V to +.V supply and can handle
More information3 V/5 V CMOS 0.5 Ω SPDT/2:1 Mux in SC70 ADG849
3 V/5 V CMOS.5 Ω SPT/2: Mux in SC7 AG849 FEATURES Ultralow on-resistance:.5 Ω typical.8 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion:.3 Ω typical.24 Ω maximum RON flatness High
More information