Element Connectors Keku System. Connector Technology. Keku Suspension fitting. EH Frame component For screw fixing to substructures Installation
|
|
- Darrell Willis
- 5 years ago
- Views:
Transcription
1 Connector TechnoloyPlannin and Construction Area of application: For fastenin panels to frame structures Material: Plastic (polycarbonate) Note The Keku R room system (store fixtures system) is based on the Keku rane and can be found in section 1. EH Frame component For screw fixin to substructures With Varianta special screws with countersunk head Ø.0 mm or 5.0 mm Packin: 200 pieces Connector Technoloy DGH-M-INT 201, HDE-en, 01/1; For roove mountin and screw fixin to substructures EHS Frame component For screw fixin to substructures, with side uide Packin: 200 pieces With Varianta special screws with countersunk head Ø.0 mm or 5.0 mm Packin: 200 pieces Functionality The side uide prevents the workpiece from slippin sideways keeps the workpiece edes parallel creates a lateral connection in conjunction with the panel FF
2 Connector TechnoloyPlannin and Construction Panel component : For screw fixin to panel with chipboard screws or Varianta special screws Ø.0 mm or 5 mm Note The combined use of panel components with and without lip on one panel reduces the overall snap-in function. With lip head With Varianta special screws with countersunk head Ø.0 or 5.0 mm Packin: 200 pieces Connector Technoloy Without lip, for panels that are frequently removed head With Varianta special screws with countersunk head Ø.0 or 5.0 mm Packin: 200 pieces EH Panel component EHS Panel component head Ø.0 mm or 5.0 mm Packin: 200 pieces head Ø.0 mm or 5.0 mm Packin: 200 pieces DGH-M-INT 201, HDE-en, 01/1; FF.68
3 Connector TechnoloyPlannin and Construction Keku Push-in fittin Area of application: For fastenin panels to frame structures Material: Plastic (polycarbonate) AS Frame component For screw fixin to substructures Keku Push-in fittin Not for suspended loads such as ceilin panels head Ø.0 or 5.0 mm Packin: 200 pieces Connector Technoloy DGH-M-INT 201, HDE-en, 01/1; ASR Frame component For screw fixin to substructures AS Panel component For screw fixin to panels head Ø.0 or 5.0 mm Packin: 200 pieces head Ø.0 or 5.0 mm Packin: 200 pieces FF
4 Connector TechnoloyPlannin and Construction Keku AD Double partition fittin Connector Technoloy Material: Plastic (polycarbonate) Anled component AD 15 for panel distance of 15 mm, for screw fixin to substructure Keku AD Double partition fittin Area of application Double partition fittins are used for: Attachin sound insulatin material to the door leaf Constructin cavity-type doors Double partitions on cabinet sides in door alcoves Connectin frame elements Linkin elements Constructin sandwich elements Installin lihtweiht partitions Mountin wall elements (booth construction) Door installation as panel construction head Ø.0 or 5.0 mm Packin: 200 pieces AD 0 for panel distance of 0 mm Panel component With lip, for screw fixin to panel head Ø.0 mm or 5.0 mm Packin: 200 pieces head Ø.0 or 5.0 mm Packin: 200 pieces DGH-M-INT 201, HDE-en, 01/1; FF.70
5 Connector TechnoloyPlannin and Construction EH Spacer plate 1.5 mm Stackable, self-fixin Area of application: Spacer plate for EH panel components Material: Polycarbonate (PC) head Ø.0 mm or 5.0 mm Packin: 400 pieces AS Spacer plate 1.5 mm Stackable, self-fixin Connector TechnoloyPlannin and Construction Connector Technoloy Area of application: Spacer plate for AS panel components Material: Polycarbonate (PC) DGH-M-INT 201, HDE-en, 01/1; head Ø.0 mm or 5.0 mm Packin: 400 pieces FF.71
Connector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationAdditional extension leaves With support leg Front extension. Folding extension leaf. Pull out systems for installation in cabinets MB 12.
Application matrix 4 2 Pae Foldin table fittin 3 Self-supportin 2 Foldin extension leaf Synchronous Additional Accessories With support le Pull out Front extension Type of leaf Tables with frame 2.8 2.9
More informationSelekta Pro 2000 Fast assembly hinges for office and commercial furniture
Fast assembly hinges for office and commercial furniture 99 The program opening angles 180 and 270 with pre-mounted pan-head screws with eccentric height adjustment ± 2 mm with eccentric overlay adjustment
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationSeries D 7 - D 128. Locking systems: Housings for series D 7, D 8, D 15, D 25 and D 128: only with single locking system
Series D 7 - D 8 Due to the lare number of conductors, the hiher series B housins are very advantaeous, since they offer enouh space and easy mountin. Lockin systems: Housins for series D 7, D 8, D, D
More informationELLIS SIDEBOARD. Pre-assembly preparation. Necessary Tools. John Lewis
John Lewis ELLIS SIDEBOARD Stock Number: 87702726 Thank you for purchasing this Ellis sideboard. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.
More informationRetrofit desk assembly instructions
Assembly instructions H-1000-0019-03-A Retrofit desk assembly instructions www.renishaw.com/cmmretrofit Assembly instructions Retrofit desk Assembly instructions for cabinet mounted retrofit desk Kit contents
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationFurniture Fittings Concealed Hinges
Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)
More informationEmpty enclosures AKL / AKi ITC - AKL / AKi Enclosures
4 basic enclosures up to 600 x 300 mm, with two different cover heights Box: choice of polystyrene (AKL) or glassfibre-reinforced polycarbonate, grey, similar to RAL 7035 Cover: grey (polystyrene or polycarbonate)
More informationTH Place, Maspeth, NY Instruction Manual for UNO Exit Signs
57-10 49 TH Place, Maspeth, NY 11378 Instruction Manual for UNO Exit Signs 1. What is included in this box? Back box with electronics, battery (where applicable), & mounting hardware. Inner trim, LED illuminator
More informationAssembly instructions
AVENTOS HK-S Assembly instructions Required parts Lift mechanism set Set includes: Lift mechanism (qty 2) Cover plate (left and right) Also includes: SCHR 4X #7 x mm (-/8 ) wood screw (qty 0) Power factor
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationCROWN IMPERIAL ASSEMBLY INSTRUCTIONS
CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1
More information790XL Dado Jig Owners Manual Please Read Carefully!
790XL Dado Jig Owners Manual Please Read Carefully! 790XL Dado Jig Hardware List: Identify and verify that you have all of the hardware shown below prior to assembly. Tools needed for assembly: #2 & 3
More information788XL Dado Jig Owners Manual Please Read Carefully!
788XL Dado Jig Owners Manual Please Read Carefully! 788XL Dado Jig Hardware List: Identify and verify that you have all of the hardware shown below prior to assembly. Tools needed for assembly: #2 & 3
More informationINSTALLATION. For more information on this product or to order samples call or visit our website at builddirect.com.
Page 1 Page 2 Page 3 Page 4 Page 5 1. Door Assembly: Step A: Attach part #34 to part #35 with screws #65/67. Step B & C: Attach part# 34.35(36) to part #33 with two #70 screws. Step D: Insert door bottom
More informationHARTING Han GND. People Power Partnership
98 42 937 0201 HARTING Han GND People Power Partnership Han GND - Mateable Potential Equalization The new Han GND series now enables pluggable grounding systems Han GND (Han Ground) is the innovative HARTING
More informationWe recommend using the locking levers on the firmly mountable wall mount housing or panel housing.
Walther multipole heavy duty connectors series DD come with sinle lockin system, series DD and DD 6 with double lockin system., DD 7 and DD 8 are either available with sinle or double lockin system. s
More informationEDGE-, COVER-, SLIDEAND SEALING PROFILES
PROFILE SYSTEM EDGE-, COVER-, SLIDE- AND SEALING PROFILES s e l i f o r P gn i l aes dna - ed i l S, - r evoc, - egde EDGE-, COVER-, SLIDEAND SEALING PROFILES These profiles are used for groove covering
More informationINSTALLATION INSTRUCTION OCULUX 3 LED - New Construction
R3BNICA-10 SAFETY INSTRUCTION IMPORTANT: NEVER attempt any work without shutting off the electricity. Read all instructions before installing. System is intended for installation by a qualified electrician
More informationPhotoelectric sensors Diffused Retro-reflective Fiber-optic
sensors Retro-reflective Fiber-optic General information mode Sensin distances up to 800 Subcompact, compact and cylindrical models Choice of quick disconnect, cable or terminal connection Liht on or dark
More informationEnclosures, guards and partitions 6. Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security
Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security Application example system solutions for enclosures and guards Components for building enclosures and guards 1 2 3 4 5 7 194
More informationBathroom Installation Guide
Bathroom Installation Guide Please read instructions carefully and check products before starting. Products should be fitted/installed by an experienced and competent fitter, failure to do so may invalidate
More informationConnector Technology, Shelf Supports
Contents Carcase Connectors MINIFIX Carcase connectors and connecting bolts RONDORFIX Carcase connectors and connecting bolts MAXIFIX Carcase connectors and connecting bolts RAFIX Carcase connectors and
More informationConnector Technology, Shelf Supports
Connector Technology, Shelf Supports Contents Carcase Connectors MINIFIX Carcase connectors and connecting bolts RONDORFIX Carcase connectors and connecting bolts MAXIFIX Carcase connectors and connecting
More informationKitchen Fittings Hanging Cabinets and Accessories
Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting
More informationGEZE SLIDING DOOR SYSTEMS
GEZE Perlan 140 Multi-faceted uses with individual accessories The discrete design supports every required room effect and makes the sliding door system with its accessories a guarantee for elegant and
More information7902 Dado Jig. Owners Manual Please Read Carefully! Hardware List: 7902 Parts List:
7902 Dado Jig Owners Manual Please Read Carefully! 7902 Dado Jig Hardware List: Identify and verify that you have all of the hardware shown below prior to assembly. Please read the instructions at least
More informationSection 7 Inteli-Touch Series Casablanca Fan Co. - Factory Service Department - Technical Library
Section 7 Inteli-Touch Series 26 W-32 WIRING DIAGRAM - With Ground wire (2 way 1 switch) 30 W-32 WIRING DIAGRAM - No Ground (2 way 1 switch) 31 W-32 WIRING DIAGRAM (2 way 1 switch) 32 WARNING! Do not use
More informationWALL UNIT. Assembly Guide Tall 1 Door. 200 Tall. 350 Tall. 150 Tall. 300 Tall. 400 Tall. 450 Tall. 500 Tall. 600 Tall
WLL UNIT ssembly uide 150 Tall 200 Tall 300 Tall 350 Tall 400 Tall 450 Tall 500 Tall 600 Tall or Internal Use: I.WR.INS.045_WKIN00130_WLL_150_600_Tall_1Dr_Rev3.indd WLL UNIT ssembly uide EORE YOU STRT
More informationInterior Equipment, Shop Fittings
Interior Equipment, Häfele, the brand you can trust. The innovator of functionality. Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Eilox SHOPTEC Shopfitting
More informationThrough and Ground Conductor Terminal Blocks 290 Series
11 474 Through and Ground Conductor Terminal Blocks 290 Series 0.34-1. mm"f-st" 0.31-1 mm"s" 1 00 V/6 kv/3 2 1 AWG 22-16"f-st" AWG 22-18"s" I N 13. A Terminal block width mm / 0.197 in 0.34-1. mm"f-st"
More informationLINK OPENING SYSTEMS FOR FLAP AND DROP DOWN DOORS. click 2 INSTALLATION UNHANDED MECHANISM COVER CAP INSERTION
INSTALLATION Recommended fi xing countersunk head wood screws Ø 4 x 18 mm for door 18 mm min. thick. Pre-inserted screw Ø 3,5 x 16 mm - PZ2. The door bracket has to be placed with the narrow part of the
More informationQuikTRAY Rollout System TENN-TEX
The from Te n n -Tex Plastics lets you add value to your entire product line. Equally useful with frame or frameless cabinets, QuikTRAY installs easily and adjusts without tools. With QuikTRAY there s
More informationup to 1000 V. Heavy-duty insulation Tested and approved VDE tools from Klauke.
Heavy-duty insulation up to 1000 V. Tested and approved from lauke. Every lauke VDE tool is produced and tested as per the latest directives of the safety test methods accordin to EN/IEC 60900 (VDE 0682
More informationTOWER UNIT. Assembly Guide. 300 & 600 Pull Out/Swing. 600 Easy Pull Out Swing Pull Out Pull Out 2250 Tall
Assembly uide 300 Pull Out 2070 600 Easy Pull Out Swing 2070 300 Pull Out 2250 Tall 600 Easy Pull Out Swing 2250 Tall or Internal Use: I.WR.INS.044_WKIN00144_TOWER_300_600_2DrPullSwing_Rev3.indd Assembly
More informationFunctional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES
SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.
More informationPirate Sandboat. Assembly Instructions REQUIRES 2 PEOPLE FOR ASSEMBLY. Item# 00128A To order replacement parts, please visit
Please retain this information for future reference ssembly nstructions REQURES 2 PEOPLE FOR SSEMBLY. 3+yrs tem# 00128 To order replacement parts, please visit ULT SUPERVSO REQURE. FOR OUTOOR USE OLY.
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationHinges and Flap Fittings Information
Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,
More information4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
More informationTechnical information on systems Standart, Econom
Technical information on systems Standart, Econom for the bottom track Multifunctional It matches every color and every product range of ARISTO profile. Esthetic It covers grooves of the bottom track,
More informationfischer NEW The installation-friendly nylon toggle plug for high loads in gypsum plasterboard.
fischer DUOtec NEW The installation-friendly nylon toggle plug for high loads in gypsum plasterboard. fischer DUOTEC. The intelligent combination for high loads in gypsum plasterboard. Due to its unique
More informationTIP FOR GETTING STARTED
Tip for getting started TIP FOR GETTING STARTED Be careful not to drill into any electrical wires, ductwork, plumbing or other damagable components. If you have any questions on the locations of these
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationAlufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition
ALUFIX BASIC SETS 2 ALUFIX BASIC-SETS Alufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition ALUFIX BASIC-SETS Note:
More informationHandleless Uni t Specification
Handleless Uni t Specification QUALITY BRITISH CRAFTSMANSHIP 160 Handless Fitting Guide - Parts Index & Base Cabinet Section 1 150 325 DRAWER 870 870 870 73 73 720 720 DOOR 685 325 2 x
More informationSikurExit: panic function multipoint locks for 1- and 2-leaf aluminum and steel doors
SikurExit: panic function multipoint locks for 1- and 2-leaf aluminum and steel doors SikurExit: panic function multipoint locks for 1- and 2-leaf aluminum and steel doors OPERATION 3 point locking mechanism
More informationCook's Corner Kitchen Assembly Instructions
Assembly Instructions 00 Melissa & Doug, LLC All rights reserved 0 We care about your comments Please call us! -800-84-948 www.melissaanddoug.com PARTS D A E I ( pieces) Q N B F J R ( pieces) S ( pieces)
More informationWALL UNIT. Assembly Guide Lift. 288 x x x x 800
Assembly uide 288 x 600 288 x 800 360 x 600 360 x 800 or Internal Use: I.WR.INS.032_WKIN00121_WALL_600_800_Lift_Rev2.indd Assembly uide EORE YOU START INSTALLATION SHOULD E PERORMED Y A OMPETENT PERSON
More informationNew: 7digit micro totalizer
Micro Adding Counters K 47 Magnetic field resistant Micro Adding Counters K 67 Micro Adding Counter K 47, shock resistant Technical data: Electrical connection: flush mount: flying leads AWG 22, appr.
More informationStructures of Needle Roller Cages for General Usage
Structure and Features eedle Roller aes for General Usae are bearins which display excellent performance. eedle rollers with extremely small dimensional variations in diameter are incorporated and retained
More informationTable and Furniture Base Fittings Table Legs and Table Bases
Square Stainless steel coloured laquered square Bright laquered square Area of application: For table and coffee tables Material: Plastic glide Finish/Colour: Table leg brushed, glide black Cross section:
More informationSEWING MACHINE CABINET OWNER'S MANUAL. Model Number Oak _90 White Cherry ASSEMBLY PARTS LIST
SEWNG MACHNE CABNET OWNER'S MANUAL Model Number 272.98300.490 Oak 272.98301.4_90 White 272.98302.490 Cherry ASSEMBLY PARTS LST MPORTANT: Read instructions before assembling. 98300-FC 98301-FC 98302-FC
More informationAluminum frame packing list of Smart Laser CO2
Aluminum frame packing list of Smart Laser CO2 1 805mm V-slot 20mm*40mm 1 2 780mm V-slot 20mm*40mm 2 3 860mm Aluminum frame 20mm*40mm 3 4 177mm Aluminum frame 20mm*40mm 1 5 85mm Aluminum frame 20mm*40mm
More informationfischer DUOTEC NEW Easy to install nylon toggle for high loads in all panel building materials
fischer DUOTEC NEW Easy to install nylon toggle for high loads in all panel building materials fischer DUOTEC 10 Easy to install nylon toggle for high loads in gypsum plasterboard Flexible screw insert
More informationFunctional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES
SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.
More informationSamuel Bunk Bed. Assembly Instructions - Please keep for future reference 183/ / /7877
Samuel unk ed - Please keep for future reference 8/8 /0 8/8 IMPORTANT NOTE: The top surface of the mattress should not come above this line. imensions Width - 98cm epth - 9.cm eight - 0cm IMPORTANT NOTE:
More informationClamping devices - mechanical
Zero point reference also on down draw clamps A fixed zero point reference on down draw clamps is self-evident in the STARK zero point mounting system. This zero point reference on down draw clamps is
More informationIncandescent Lampholders: Edison Screw and Bayonet Cap
: Edison Screw and Bayonet Cap Table of Contents E14 22.223 22.230 E12 22.228 22.231 [08]..10 E17 E27 22.317 [08] 12 22.318 [08] 12, 13 2010-2012 This page is only valid in connection with the general
More informationSentinel Series Cigar Humidor End Tables
Sentinel Series Cigar Humidor End Tables Assembly Instructions Models: Sentinel 500, 1000 and 1500 Style: Traditional SENTINEL ASSEMBLY INSTRUCTIONS Congratulations! You have purchased a superior cigar
More informationSTEP 1 - CEILING PREPARATION
STEP 1 - PREPARATION 1/4-20 THREADED RODS SR FIXTURE SLOT/ IN SHEET ROCK WHIP A) MAKE SLOT IN SHEET ROCK ACCORDING TO RUN INFORMATION, TYPE OF FIXTURE AND REFER TO S REQUIRED (FIGURE 2 - SR* AND FIGURE
More informationDesign and Manufacture JOINING
Design and Manufacture JOINING Introduction Different materials require different tools. These tools and joints are used when joining wood: Finger Dovetail Housing Dowel Cross halving Corner Lap Mortise
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationDRIVIA cabinets LIMOGES Cedex France 1. DESCRIPTION, USE 3. DIMENSIONS 2. RANGE, CAT. NO. EQUIVALENCE TABLE
87045 LIMOGES Cedex France Tel: (+33) 05 55 06 87 87 Fax: (+33) 05 55 06 88 88 DRIVIA cabinets CONTENTS NTS PAGES 1. Description, use....1 2. Range, equivalence table...1 3. Dimensions...1 4. General characteristics...2
More informationFURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories
More informationSection 3: Understanding Your Shop Drawings Reading Shop Drawing Abbreviations 60" O.A. stands for the overall dimension from the back wall to the front face of achieve your 60" overall you will set the
More informationReference. Color. Category. Light source. Gross luminous flux. Power. Power values of the system. Colour temperature. Colour Rendering Index
Io PRODUCT Name Reference Color Category IO º 4000K WT A26022WT Textured white SPOTLIGHTS LIGHTING INFORMATION DIMENSIONS Light source Gross luminous flux Power Power values of the system Colour temperature
More information2 Door Wooden Cabinet
2 Door Wooden Cabinet 832/123 cm 13.cm cm Components - Panels Please check you have all the panels listed below 1 Top 2 ottom 3 djustable Shelf Left & Right side x 2 ack Left Door Right Door 2 Components
More informationPANIC BARS Marking IN ACCORDANCE WITH 1125:1997/A1:2001
PANIC BARS Marking IN ACCORDANCE WITH 25:997/A:200 Exclusive PININFARINA design Full adaptability in application Quick and easy installation Reliable and safe performance Tested up to 2.000.000 cycles
More informationACTIVESMART INTEGRATED REFRIGERATOR
ACTIVESMART INTEGRATED REFRIGERATOR FRAMED AND FRAMELESS CABINETRY RS36W and RS91W Models DUAL INSTALLATION GUIDE NZ AU GB IE HK SG IN US CA FOLLOW THE INSTALLATION SEQUENCE 1 Safety and warnings 3 2
More informationGENERAL INSTALLATION INSTRUCTIONS FOR SMU TYPE METAL DOORS AND SMU HATCH USE OF DOORS
Effective from: 04.05.2017 Page: 1 GENERAL INSTALLATION INSTRUCTIONS FOR SMU TYPE METAL DOORS AND SMU HATCH USE OF DOORS The SMU type doors can be used as opening fillers with the fire resistance class
More informationINSTALLATION INSTRUCTIONS Aluminum Railing System
INSTALLATION INSTRUCTIONS FASCIA MOUNT SURFACE MOUNT OFFSET BASE SURFACE MOUNT STANDARD BASE CORE MOUNT Ø3" [Ø76 mm] 3 2 1 " [89 mm] 1 4 1 " [32 mm] 2 8 7 " [73 mm] 200 SERIES 300 SERIES 3 3 4 " [95 mm]
More informationNeedle Roller Bearings with Separable Cage - Without Inner Ring Needle Roller Bearings with Separable Cage - With Inner Ring D95 D96
eedle Roller Bearins with Separable ae - Without Inner Rin eedle Roller Bearins with Separable ae - With Inner Rin Structure and Features In eedle Roller Bearins with Separable ae the inner rin outer rin
More informationALPHA DIN Wall-Mounted. Distribution Boards
Siemens AG 008 ALPHA 160 - DIN Wall-Mounted Distribution Boards / Introduction Distribution Boards with Built-In Distribution Board Panels /4 8GK1 surface and flush-mounting with quick-assembly kits Unequipped
More informationindustrial fitting THE CABINET THAT CHANGES CABINETS
industrial fitting THE CABINET THAT CHANGES CABINETS VALID UNTIL 31/08/2016 CO Available in five colours: GREEN stacking containers and storage containers Recycled plastic, clean energy. From materials
More informationAPPLICATIONS. - Mounted with groove inwards: for covering of profile grooves
. 1 - e g d - r e v o e d i l d n g n i l a e S s e l i f o r P 1 PROFILE SYSTEM 1.7 EDGE-, COVER-, SLIDE- AND SEALING PROFILES 7, E, C - S a COVER PROFILE part no. 22.1070/1 -HardPVC,grey - Available
More informationTall Storage Unit. Assembly Instructions - Please keep for future reference 833/2536
Tall Storage Unit ssembly Instructions - Please keep for future reference 33/2536 Dimensions Width - 32.5cm Depth - 30.cm Height - 0cm Important - Please read these instructions fully before starting assembly
More informationAssembly locations. Document feeder assembly. Printer door. assembly. Upper guide. assembly. Control panel assembly. Feed assembly
Assembly locations Document feeder assembly Printer door assembly Upper guide assembly Control panel assembly Feed assembly Electrical components Figure 83. Assembly locations EN Assembly locations 205
More informationM MODULAR PARTS T01-A INSTALLATION INSTRUCTIONS MIRRORED CABINET SIMPLIFIED LEFT OPENING DOOR K-15512T-NL RIGHT OPENING DOOR K-15512T-NR
M M MODULAR INSTALLATION INSTRUCTIONS ( ) MIRRORED CABINET SIMPLIFIED LEFT OPENING DOOR K-1551T-NL RIGHT OPENING DOOR K-1551T-NR BEFORE YOU BEGIN Please read these instructions carefully to familiarize
More information40670 Transit Connect/NV200/City Express/ProMaster City Partition
40670 Transit Connect/NV200/City Express/ProMaster City Partition Top Panel (1) Bottom Panel (1) Transit Connect (2014) Top Angle (1) TC Top MNT BRKT (2) TC Bottom MNT PLT (2) NV200/City Express Top Mount
More informationa.k.a. casegoods instructions
a.k.a. casegoods instructions a a.k.a. workwall installation IMPORTANT NOTES Failure to install product according to installation instruction will result in loss of warranty. Tools required for assembly
More informationSTANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
More informationSliding system for concertina doors. Sliding system for concertina doors
Sliding system for concertina doors Sliding system for concertina doors 275 Sliding system for concertina doors - Technical features Elements of the system The Salice system for concertina doors has been
More informationM MODULAR PARTS T01-A INSTALLATION INSTRUCTIONS MIRRORED CABINET W/DEFOGGER K-15512T , 2011 Copyright Kohler China Ltd.
M M MODULAR INSTALLATION INSTRUCTIONS ( ) MIRRORED CABINET W/DEFOGGER K-15512T BEFORE YOU BEGIN Please read these instructions carefully to familiarize yourself with the required tools, materials, and
More information2/2 Introduction. Unequipped Distribution Boards 2/5 8GK1 surface and flush-mounting distribution boards
Siemens AG 010 ALPHA 160 - DIN Wall-Mounted Distribution Boards / Introduction Distribution Boards with Built-In Distribution Board Panels /4 8GK1 surface and flush-mounting with quickassembly kits Unequipped
More informationDICTATOR RTS Tube Door Closer
Tube Door Closer RTS v long DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is built into the door and therefore is as good as invisible. The joint can only
More informationMedium HoneyBadger Chase Rack Installation Instructions
PREPARATION Medium HoneyBadger Chase Rack Installation Instructions 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set the emergency brake. 2. We recommend reading
More information77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.)
ARCHIMEDE ST.102-4ENG SPECIFICATION Range: ARCHIMEDE Design: Caimi Lab 5203-GA, 5203-BO, 5213-GA, 5213-BO, 5223-GA, 5223-BO, 5233/3-GA, 5233/3-BO, 5241/3-GA, 5241/3-BO, 5243/3-GA, 5243/3-BO, 5245/3-GA,
More informationFor installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.
SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device
More informationSetup. The Faraday Cage is available in two types of configurations. Cage for mounting to a full perimeter enclosure on series tables.
Faraday CageSetup, 2017 Setup The Faraday Cage is available in two types of configurations. Cage for mounting to a full perimeter enclosure on 63-500 series tables. Cage with a base plate for use on a
More informationFORD INTERCEPTOR SEDAN READY BUCKLE
INSTALLATION MANUAL FORD INTERCEPTOR SEDAN READY BUCKLE PART# FT3501RB We recommend you read through the installation guide prior to installation, if you have any questions please call us at 800-516-2322
More information+ - 1a. 1b. c. 1d. 1e. Runway Suspended / Surface Cont. Run Installation. 2.0mm DIL DIL Revision - M 23/11/2018 Page 1
230-240V / 50-60Hz IP20 IK00 + - 2.0mm WARNING - THIS LUMINAIRE MUST BE EARTHED This luminaire has been tested and is manufactured to comply with BS EN 60598 : specification for general requirements and
More informationGable Greenhouse Instructions
Gable Greenhouse Instructions Part 1; Build The Base Frame Photo below shows connector components in this basic 12x12 kit. Self Drilling tech screws are included with kit. This kit requires 16 gage or
More informationTechnical Product Description
Worktops 5. Thickness material structure Front edge Bottom face coating 40 mm, 50 mm Laminate according to standard: EN 438 Wood pore or relief, matt or gloss 2 x Radius 3 mm, 6 mm or 8 mm depending on
More informationZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS.
ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS Zargen and Integra steel drawer systems provide flexibility to please the most demanding design needs. www.grassusa.com Zargen and Integra Drawer
More informationMETALPLAST-SOPRANA BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX
4 HINGES >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 VERSION WITH OVERTURNED PART ADJUSTABLE HINGE
More informationCOMPONENTS P A N E L + S H E L F F I X I N G S A C R Y L I C S A C C E S S O R I E S F I N m m C A B L E m m R O D.
COMPONENTS T H E D E F I N I T I V R A N G E C A B L E + R O D A C C E S S O R I E S P A N E L + S H E L F F I X I N G S 1. 5 m m C A B L E 3 m m C A B L E 6. 0 m m R O D 1 2. 0 m m R O D T R A C K F I
More information