Additional extension leaves With support leg Front extension. Folding extension leaf. Pull out systems for installation in cabinets MB 12.
|
|
- Heather Lewis
- 5 years ago
- Views:
Transcription
1 Application matrix 4 2 Pae Foldin table fittin 3 Self-supportin 2 Foldin extension leaf Synchronous Additional Accessories With support le Pull out Front extension Type of leaf Tables with frame Tables without frame Pull out systems for installation in cabinets 2.30 Table extension fittins Table with or without frame Tables with and without frames are constructed and function in different ways. Table with frame = one-piece table base The separable table tops are pushed apart. The table base remains unchaned. Table without frame = multi-piece table base The separable table bases with ixed table top are pushed apart. 2 Followin applies for both tables with frame and without frame: Extension leaf Minimum width 400 Standard 500 Comfort 600 One extension leaf provides additional seatin for 2 people. Synchronous Only one table side must be pulled out. The opposite side of the table is then extended automatically. Both table sides must be pulled out separately. Without lockin mechanism For lockin the pull out table ittin in extended position additional ittins are required (table top swivel bolts, lockin hooks or sprin clips). With lockin mechanism The lockin mechanism is interated in the pull out table ittin. No further ittins are required. 2.6 Even easier product search. DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter speciications without notice. 2.3
2 Information Pull out table ittins for tables with frame Construction One-piece table base Separate table tops and with table top connectin ittins and sleeves Extension leaves can be itted to the table frame with a foldin ittin. Notes on construction Pull out tables with closed frames can also be equipped with an extension leaf with a hined middle section (foldin ittin). The foldin ittin is required in addition to the pull out table ittin and must be ordered separately. Note on choice of pull out table ittin lenth L of pull out table ittin = approx. lenth of frame/base or approx. 2/3 of table Ø or table lenth without A L B E = width of extension leaf = installation lenth of pull out table ittin = total extension lenth of pull out table ittin = openin for extension leaf Please note: If the installation lenth L is less than approx. lenth of frame/base or table Ø, this may lead to malfunction or sain of the table top. Open table frame Closed table frame Separate extension leaf on end side DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter speciications without notice. Separate extension leaf Separate extension leaf (separate storae) Foldin fittin Separate extension leaf (interated in table) Foldin ittin (interated in table) Note: Foldin fittin must be ordered separately in addition to the pull out table fittin. Front extension Front extension Open table frame Foldin ittin (interated in table) Foldin ittin (interated in table, "drawer function") Pull out table ittins for tables without frame Construction Multi-piece table base, each ixed to one half of the table top. Surroundin panel beneath table top stabilises the pull out table. Notes on construction If the table les are mounted inwards (with balance point on table top half) the pull out table ittin can be used without a central rod. If table les are mounted outwards, always select pull out table ittin with central rod. Central rod Note on choice of pull out table ittin lenth L of pull out table ittin = approx. lenth of frame/base or approx. 2/3 of table Ø or table lenth without View of table from below, A = width of extension leaf without extension leaf L = installation lenth of pull out table ittin B = total extension lenth of pull out table ittin E = openin for extension leaf A lenth of pull out table ittin is approx. lenth of frame Please note: If the installation lenth L is less than approx. lenth of frame/base or 2/3 of table Ø, this may lead to malfunction or sain of the table top. Types of tables without frame Open table frame Front extension Separate extension leaf (separate storae) Open table frame Separate extension leaf (separate storae) Easier naviation. Intuitive indin Types of tables with frame 2
3 For tables with frame Ball bearin runners For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. Galvanized For screw fixin For extension leaf Synchronous, asynchronous or synchronous with continuous, lateral lockin mechanism For 2 Synchronous with continuous, lateral lockin mechanism For 2 4 people more at the table For 2 people more at the table Area of application: Also suitable for lass tables 2 Load bearin capacity 60 k lenth Load bearin capacity Openin for extension leaf Width of extension leaf Total extension lenth Mountin bracket lenth Recoended table lenth Load bearin capacity k 850 k 60, x 600 x x x 400,250,40,830, , ,250,800 Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/ base or approx. 2/3 of table diameter or table lenth without lenth Load bearin Version capacity k 60 Synchronous Synchronous With lateral lockin mechanism 60 Synchronous Packin: set The set does not include 8 table top connectin fittins and 4 lockin hooks or 4 swivel lus. Please order separately. 2.8 Load bearin capacity Openin for Width of Total extension lenth Mountin bracket lenth Recoended table lenth k x 400, ,250,800 Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/ base or approx. 2/3 of table diameter or table lenth without lenth 200 Load bearin capacity k Packin: set The set does not include 2 table top connectin fittins and 2 lockin hooks or 2 swivel lus. Please order separately. Table top connectin fittins 2.2 Lookin hook 2.2 Swivel lu 2.2 Foldin fittin 2.20 Loical and easy. Intellient filters for findin the riht product. DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice.
4 For tables with frame Roller runners For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. For 2 people more at the table Aluminium Briht For screw fixin For extension leaf For extension leaf Synchronous with pull cable DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. Load bearin capacity Openin for extension leaf Width of extension leaf Total extension lenth Mountin bracket lenth lenth 800 Packin: set k , Load bearin capacity lenth Openin for extension leaf Width of extension leaf Mountin bracket lenth k x lenth , x Packin: set 2 h Foldin fittin At a lance. All of the data for your plannin
5 For tables with frame Foldin fittin For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. For extension leaf Area of application: For foldin and lowerin an extension leaf up to max. 500 Functionality: Semi-automatic lowerin, smooth operation Note These items are only suitable for extendin table runners for tables with frame. 2 h For extension leaf, for closed table frame A Leaf handle B Table top connectin fittin I Pivot bearin J Supportin bracket K Foldin table hine L Foldin table hine Packin: set 2.20 K Foldin table hine L Foldin table hine Supplied with Each of riht and left drive Each of riht and left slidin support Inclined piece, runner Leaf handle, 4 lockin hooks Set of installation instructions Supplied with Leaf handle A 8 Table top connectin fittins B 2 Sprin clips Pair of pivot bearins I 2 Supportin brackets J 2 Foldin table hines K Set of installation instructions For table top thickness 9 22 A Leaf handle B Table top connectin fittin C Lockin hook For table top thickness Packin: set The scope of delivery does not include 8 table top connectin fittins and 2 foldin table hines. Please order separately. Table top connectin fittins 2.2 Foldin table hines 2.23 Pull out table fittins for tables with frame 2.8 More reliable on the job. More clarity. Iediate delivery info. DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. For extension leaf, for open table frame
6 For tables with frame Foldin fittin individual components For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. Leaf handle A Nickel plated For screw fixin to extension leaf Leaf handle A Lockin hook D Swivel lu E Table top connectin fittin B DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. Zinc alloy Nickel plated For screw fixin beneath table top Packin: or 00 pieces Packin: or 50 pieces Galvanized For mountin in drilled hole or screw fixin beneath table top Material thickness:.5 Yellow chromatized For press fittin into Ø 8 drill holes Table top connectin fittin B Packin: 20, 00 or 000 pieces Swivel lu E Packin: or 00 pieces Lockin hook 52 C Swivel lu F Lockin hook 53 D 2 Yellow chromatized For screw fixin beneath table top Lockin hook C Packin: or 00 pieces Brass plated For mountin in drilled hole or screw fixin beneath table top Swivel lu F Packin: or 00 pieces Start iediately. With familiar functions
7 For tables with frame For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. Sprin clip G Pivot bearin I Galvanized For screw fixin beneath table top Sprin clip G Packin: or 00 pieces Yellow chromatized For screw fixin beneath extension leaf Pivot bearin I Packin: or 50 pairs Yellow chromatized For screw fixin beneath table top Sprin clip with lockin mechanism H Packin: or 00 pieces Supportin bracket J Yellow chromatized For screw fixin beneath table frame Supportin bracket J Packin: or 200 pieces Quick and easy. Research, obtain information and order. DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. Sprin clip with lockin mechanism H
8 For tables with frame For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. Foldin table hine K Foldin table hine L For panel thickness 8 20 For panel thickness 22 27! 2 ; 23 (from panel thickness 28 ) Foldin table hine Half spacer plate Material: Finish: For wood thickness: : Supplied with: Zinc alloy Yellow chromatized 8 27 For recess mountin With half spacer plates, quantity in accordance with table below DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. The provided 2 plates must be placed beneath 6 leaves. For Recess LxW table top depth ET thickness Heiht H A Material thickness Md x x x x x x x Half spacer plates Recess depth Heiht H.7 For table top thickness Functionality For table top thickness For table top thickness Packin pieces or 50 or 50 or 50 Yellow chromatized For table top thickness: With internal joint 6 25, with external joint For recess installation Packin: or 00 pieces Enjoyable work. Attractive desin
9 For tables with frame Roller runners For tables with frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. With synchro drive for fixed table foot, for foldin extension leaf Flat pull out profile allows for an attractive desin Pull out profile aluminium, silver coloured anodized Set complete with pull out frame (after connectin the foldin fittin) For 4 6 people more at the table Foot position can be selected individually Area of application: For pull out tables with central table foot or with side panels/le frame bases Aluminium Silver coloured anodized For screw fixin to table top Load bearin capacity k Total extension lenth,800 For table top size 2,000 x 950 Foldin extension leaf,000 x 950 (2 x,000 x 474.5) Note Foot position optional at intervals of 80, fixin with M6 thread in construction frame Supplied with Set of table leaf extension runners with pull out frame Set of foldin fittins Set of installation instructions lenth Packin: set 2 Table top dimensions 2.24 Table base fixin options Advise more efficiently. Product comparisons in tabular form. DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. Functionality
10 For tables with and without frame Ball bearin runners For tables with and without frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. For 3 For 4 Synchronous with continuous cord retainer Synchronous with continuous cord retainer Support foot provided on site Type A Type B lenth 850 : For 2 4 people more at the table lenth,200 : For 2 6 people more at the table For 2 8 people more at the table Galvanized For screw fixin beneath table top Aluminium Silver coloured anodized For screw fixin beneath table top! Supportin bracket " Table without frame: Cross bar for Table with frame: Base and support for! Support for Table with frame Wooden table top! Openin for " lenth Total extension lenth Table without frame lenth Load bearin capacity Openin for extension leaf Width of extension leaf Total extension lenth Mountin bracket lenth Recoended table lenth lenth k 850,050 2 x 500, ,250,200,5 3 x 500 2,7 725,250, lenth Load bearin capacity of table with frame Load bearin capacity of table without frame, type A Load bearin capacity of table without frame, type B Openin for Width of Total extension lenth Mountin bracket lenth Recoended table lenth k,200 50, k k 50 20,760 4 x 400 2,960,25,250,800,850 3 x 600 3,450,600,650 2,400 lenth Packin: set Packin: set Table top connectin fittins and sprin clips are not supplied. Please order separately. Other sizes available on request Scope of delivery does not include 20 table top connectin fittins and 2 sprin clips. Please order separately. Work productively. Access to all Häfele services. DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice f
11 For tables without frame Ball bearin runners Ball bearin runners For tables without frame / Plannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. For tables without frame + framesplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. For foldin extension leaf For 2 people more at the table One-sided front extension "drawer principle" Pull out profile aluminium, silver coloured anodized For 2 people more at the table Galvanized For screw fixin beneath table top For extension leaf Area of application: For extendin tables with front extension on one side Aluminium Silver coloured anodized For screw fixin to table top Functionality Load bearin capacity One foldin extension leaf Extension leaf frame Openin for extension leaf 640 Width of extension leaf x 600 Total extension lenth,60 Mountin bracket lenth 305 Recoended table lenth Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/base or approx. 2/3 of table diameter or table lenth without lenth Packin: set The set does not include 8 table top connectin fittins and 4 sprin clips or 4 swivel lus or 4 lockin hooks. Please order separately. 2 k Load bearin capacity k Openin for 630 Width of x 500 Total extension lenth 483 Note The table lenth must be at least,0 when usin front extensions for each front side. Supplied with Set of table leaf extension runners Set of foldin fittins Set of installation instructions lenth Packin: set 2.26 Discover. New products for your requirements. DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. Technical Data
12 For tables without frame Ball bearin runners For tables without frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. Galvanized For screw fixin beneath table top For 2 For 2 or 3, with central rod For 2 6 people more at the table For 2 4 people more at the table Version: Finish/colour: With central rod for improved stability Runners and cetral rod: Runners: Galvanized, central rod: Powder coated, white aluminium, RAL 06 lenth Load bearin capacity Openin for Width of extension leaves Total extension lenth Mountin bracket lenth Recoended table lenth 740 k,200,600,080,080,280 2 x x x 600,820,820 2, ,200,250,800,650 2,400 Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/ base or approx. 2/3 of table diameter or table lenth without lenth Packin: set The set does not include 2 table top connectin fittins and 6 sprin clips or 6 swivel lus or 6 lockin hooks. Please order separately. lenth Load bearin capacity Openin for Width of extension leaves Total extension lenth Mountin bracket lenth Recoended table lenth 860 k,200,600,20,560,560 2 x x x 500,980 2,760 3, ,200,250,800,650 2,400 DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/ base or approx. 2/3 of table diameter or table lenth without Note Installin a support foot on site is recoended with installation lenth,600. lenth Table top connectin fittins 2.2 Lookin hook 2.2 Packin: set Swivel lu 2.2 Sprin clips 2.22 The set does not include 2 table top connectin fittins and sprin clips or 6 swivel lus or 4 lockin hooks. Please order separately. Product imaes, instructions and films riht next to the product
13 For tables without frame For 4 For 3 For tables without frameplannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice., with hined telescopic support foot For 2 8 people more at the table For 2 6 people more at the table Finish/colour: Galvanized For screw fixin beneath table top Runners and support foot: Runners: Galvanized, support foot: Powder coated white aluminium, RAL 06 For screw fixin beneath table top 2 Load bearin capacity k Openin for,620 Width of 3 x 500 Total extension lenth 2,360 Mountin bracket lenth 605 Recoended table lenth 7,00 Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/ base or approx. 2/3 of table diameter or table lenth without lenth 740 lenth Load bearin capacity k Openin for The set does not include 6 table top connectin fittins and 8 sprin clips or 8 swivel lus or 8 lockin hooks. Please order separately. 2.28,200 2,00 2,560 Width of 4 x x 500 Total extension lenth 2,720 3,760 Mountin bracket lenth Recoended table lenth 670,000,250,800 Note on choice of pull out table fittin lenth of pull out table fittin = approx. lenth of frame/base or approx. 2/3 of table diameter or table lenth without lenth Packin: set The set does not include 20 table top connectin fittins and 0 sprin clips or 0 swivel lus or 0 lockin hooks. Please order separately. Table top connectin fittins Packin: set! Support foot 2.2 Lookin hook 2.2 Swivel lu 2.2 Sprin clips 2.22 Efficient operation. Effective in application. DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice.
14 For tables without frame Ball bearin runners For tables without frame / Plannin and ConstructionDimensional data not bindin. We reserve the riht to alter specifications without notice. For or 2 foldin Pull out profile aluminium, silver coloured anodized For 2 4 people more at the table Functionality Two foldin DGH-M 207, HDE-en, 0/6; Dimensional data not bindin. We reserve the riht to alter specifications without notice. lenth 940,400 Load bearin capacity k 5 5 Openin for extension leaves,30,30,30 Width of extension leaves x,000 or 2 x 500 For table top lenth,040,500 5,500,0,800,0 2,400 Note Pull out frame for fixin the foldin fittins must be manufactured on site in accordance with the installation instructions. Supplied with Set of table leaf extension runners Set of foldin fittins 2 Inset castors instructions lenth One foldin extension leaf Area of application: For extendin tables with frame, one-side extension Runners: Aluminium, foldin fittin: Runners: Silver coloured anodized, foldin fittin: Galvanized For screw fixin to table top and pull out frames Packin: set Please order foldin table hine for foldin extension leaf separately. Extension leaf frame with two foldin : Dimensions exemplary for foldin extension leaf 2 x 500, table width,000 Extension leaf frame with one foldin extension leaf: Dimensions exemplary for foldin extension leaf x,000, table width,000 Foldin table hine Simplified re-orderin. Comprehensive order archive
Table and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationElement Connectors Keku System. Connector Technology. Keku Suspension fitting. EH Frame component For screw fixing to substructures Installation
Connector TechnoloyPlannin and Construction Area of application: For fastenin panels to frame structures Material: Plastic (polycarbonate) Note The Keku R room system (store fixtures system) is based on
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationTable and Furniture Base Fittings Table Legs and Table Bases
Square Stainless steel coloured laquered square Bright laquered square Area of application: For table and coffee tables Material: Plastic glide Finish/Colour: Table leg brushed, glide black Cross section:
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationInterior Equipment, Shop Fittings
Interior Equipment, Häfele, the brand you can trust. The innovator of functionality. Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Eilox SHOPTEC Shopfitting
More informationwww.hafeleindia.com www.hafeleindia.com INTRODUCTION Intuitive furniture is the need of the hour. In times like these where every extra square meter is considered as good as gold, installing versatile
More informationHinges and Flap Fittings Information
Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,
More informationlumbing tools Pipe / Tube cutting 13 Bending Assembly and Maintenance Clamping Flaring / Swaging Drain cleaning
P lumbin tools Pipe / Tube cuttin 13 12 Bendin 31 Clampin 24 Assembly and Maintenance 35 Flarin / Swain 27 Drain cleanin 37 Pipe / Tube cuttin Tube cutters Mini tube cutter For copper, brass, aluminum
More information77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.)
ARCHIMEDE ST.102-4ENG SPECIFICATION Range: ARCHIMEDE Design: Caimi Lab 5203-GA, 5203-BO, 5213-GA, 5213-BO, 5223-GA, 5223-BO, 5233/3-GA, 5233/3-BO, 5241/3-GA, 5241/3-BO, 5243/3-GA, 5243/3-BO, 5245/3-GA,
More informationRoman Blind System SECTION J
System Roman Blind System SECTION J ROMAN BLIND SYSTEM EASY step by step fitting instructions Mono control operation - when the cord reaches its maximum drop, by continuing to pull on the chain the blind
More informationFreedom Road Lancaster, PA 17601
1834 Freedom Road Lancaster, PA 17601 1-888-820-5114 If you have any questions or problems with your ComposTumbler 2 assembly that aren t covered by this booklet, please call us at 1-888-820-5114 & We
More informationATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.
F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405
More informationConnector Technology, Shelf Supports
Connector Technology, Shelf Supports Contents Carcase Connectors MINIFIX Carcase connectors and connecting bolts RONDORFIX Carcase connectors and connecting bolts MAXIFIX Carcase connectors and connecting
More informationFurniture Fittings Concealed Hinges
Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)
More informationTANDEM plus BLUMOTION
TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationDUALCASE VERSATILE ALUMINIUM SIGN SYSTEM
VERSATILE ALUMINIUM SIGN SYSTEM Universal Components Ltd. May 2007 Introduction Nothing beats DualCase for speed of fabrication, aesthetic appearance and easy maintenance. With the minium of components
More informationthe LooX LIgHtINg SySteM LeD lighting systems for furniture and furnishings
www.hafele.com the LooX LIgHtINg SySteM LeD lighting systems for furniture and furnishings THE LIGHTING SYSTEM Contents Lighting systems for furniture and furnishings Introduction 12 V system 24 V system
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
More informationMADE IN GERMANY. Developed & Manufactured By. Drawer Runner System.
MADE IN GERMANY Developed & Manufactured By Drawer Runner System www.hafele.com MADE IN GERMANY Overview BASI SYSTEM Drawer sides with multi-functional benefi ts The Moovit drawer system provides completely
More informationMOVENTO. The Evolution of Motion
The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer
More informationKitchen Fittings Hanging Cabinets and Accessories
Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting
More informationACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports
ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted
More informationGEZE SLIDING DOOR SYSTEMS
GEZE Perlan 140 Multi-faceted uses with individual accessories The discrete design supports every required room effect and makes the sliding door system with its accessories a guarantee for elegant and
More informationCompany profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS
Furniture fittings Company profile TOKOZ a.s. is a company working in the field of security mechanisms for more than 90 years. Thanks to years of experience we have become real experts on manufacturing
More informationConnector Technology, Shelf Supports
Contents Carcase Connectors MINIFIX Carcase connectors and connecting bolts RONDORFIX Carcase connectors and connecting bolts MAXIFIX Carcase connectors and connecting bolts RAFIX Carcase connectors and
More informationSTANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
More information3. Barrier elements. Barrier posts. Stainles steel
3. Urban Equipment Building Equipment Stainles steel e 3.1 Tubular hoops 216-223 3.2 Access barriers 224-227 3.3 Height restriction barriers 228-231 3.4 Protective railing 232-237 3.5 City fence 238-240
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationREPAIR INSTRUCTIONS: CABLE
The repair instructions describe replacing the Cable in the Easy Sun PARASOL Sunshade. These repair instructions are intended only for persons with experience of using the tools required. Please read the
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationHardware and Components:
Hardware and Components: (A) 5/16 x 2 Hex Bolt (B) 5/16 x 2-1/4 Hex Bolt (C) 5/16 x 2-1/2 Hex Bolt (D) 4X 5/16 x 3/4 Hex Bolt (E) 4X 5/16 x 1-1/4 Hex Bolt (F) 11X 5/16 Flat Washer (G) 12X 5/16 Nylock Nut
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationALUFIX BASIC SETS. Modular Clamping System
ALUFIX BASIC SETS Modular Clamping System 2 ALUFIX CLASSIC ALUFIX CLASSIC is a worldwide reknowned and proven modular positioning and fixturing system for almost all applications in dimensional measuring
More informationPORTABLE UNITS BASKETBALL SCHELDE SUPER SAM MULTI-ADJUST
PORTABLE UNITS SCHELDE SUPER SAM MULTI-ADJUST Highest class unit with regulated projection (within range of 245-325 cm) equipped with SAM (Spring Assisted Mechanism) - unique solution which avails to set
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationMounting Instructions Item No.: /521/522/420/421/422
Mounting Instructions Item No.: 541.35.520/521/522/420/421/422 Revolving Corner Unit In addition to these general mounting instructions, please refer to the fitting instructions, where the individual drilling
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationHOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged
More informationCabinet Rim lock, Push Button type, - 25 mm backset Page 2-3
Izerwaren Order numbers 25.191. Cabinet Rim lock, Push Button type, - 25 mm backset Page 2-3 Cabinet Rim lock, backset 25 mm - 1 Minimum door thickness 19 mm ~3/4 Strike plate not included with lock Both
More informationHardware and Components:
Hardware and Components: (A) 4X 5/16 x 1 Carriage Bolt (B) 2X 5/16 x 2-1/4 Carriage Bolt (C) 2X 5/16 x 3-1/4 Hex Bolt (D) 2X 5/16 x 3/4 Hex Bolt (E) 2X 5/16 x 1-1/4 Hex Bolt (F) 5/16 x 2-1/4 Hex Bolt (G)
More informationCaged Roller Bearings Full Complement Roller Bearings Roller Bearings for Sheaves. Structures of Roller Bearings. Outer ring. Roller.
aed Roller Bearins Full omplement Roller Bearins Roller Bearins for Sheaves Structure and Features Roller Bearins in which rollers are incorporated in two rows are nonseparable heavyduty bearins. They
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationDoor Bolt - Satin Chrome. High quality solid brass, chrome plated surface fix bolt.
Bolts Door Bolt - Polished Brass Door Bolt - Polished Chrome Door Bolt - Satin Chrome Door Bolt - Florentine Bronze High quality solid brass surface fix bolt. High quality solid brass, chrome plated surface
More informationFURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories
More informationAccessories and workbenches
Workbenches To complete the Elabo furnishing systems, we also provide workbenches and organisable steel plate base cabinets. Steel cabinets, shelves and shelf trolleys are available for storage of materials
More informationSilent Aluflex 80 Sliding door system: A wealth of options for peoples who want the best
Silent Aluflex 80 Sliding door system: A wealth of options for peoples who want the best Escape the mundane and discover something special: Unusual inspirations and surprising solutions for your space
More informationFortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.
Installation Instructions for Fortress Vertical Cable Panel System with Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain all required
More informationTHE COMPLETE CABINET
THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is
More informationTHE COMPLETE CABINET
THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is
More informationConnectors slot fasteners
Description Slot nut () The slot nut is directly adapted to the T-slot of the structural system. On the support beam, the slot nut may be entered into the T-slot from the beam side, thus making it very
More informationSliding Door System Terra M ST.1062.TM. Premium Edition
Sliding Door System Terra M ST.1062.TM Sliding Door System TERRA M ST.1062.TM 2 3 Sliding Door System TERRA M ST.1062.TM Terra M is perfect for installations without a load-bearing ceiling. The roller
More informationE11.15 HANDLES AND LOCKCASES E11 BOTTOM HUNG OPEN IN WINDOWS
E11 BOTTOM HUNG OPEN IN WINDOWS HANDLES AND LOCKCASES 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Handles
More informationSTORAGE & SHELVING SYSTEM - INSTALLATION GUIDE
STORAGE & SHELVING SYSTEM - INSTALLATION GUIDE If you have ordered storage drawers, shelving, hanging rails or shoe racks this guide will help you install your storage and shelving system, together with
More informationDRAWER Mitsubishi pajero lwb
DRAWER Mitsubishi pajero lwb SSDS601 / SSMP001 INSTALL TIME: 45 mins Thank you for purchasing a Front Runner Storage System. This Storage System is made up of the following components: 1. A Drawer System
More informationC11.15 HANDLES AND LOCKCASES C11 SIDE HUNG WINDOWS
C11 SIDE HUNG WINDOWS C11.15 HANDLES AND LOCKCASES 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Handles
More informationBÖMA GmbH Maschinenbau und Automatisierungstechnik
Construction kit index Profiles Aluminium grid 40 1.01 Aluminium grid 50 1.02 KP-40/50 Plastic profile 1.03 AP-40/50 Aluminium cover profile 1.03 SBT-F Sliding doors guide prof. 1.04 FL-40/50 Wear strip
More informationFURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery
More informationHawko LED Flex & Accessories Installation Instructions
LED Flex & Profiles Hawko LED Flex & Accessories Installation Instructions Contents Installation of IP20 LED Flex 4 Installation of IP67 LED Flex 6 Mounting Channel Installation 8 Mounting Clip Installation
More informationsalto safe 4028 A12 Turn-tilt windows
A12 Turn-tilt windows salto safe 4028 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. 32 9 388 88 81 - F. 32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com salto safe 4028 Contents 1. General
More informationKWS Handrail Systems. Architectural Hardware
KWS Handrail Systems Architectural Hardware Technical Information KWS Handrail-Systems - the flexible solution System for handrails in stainless steel and timber Completely pre-assembled or single components
More informationTransition Range Installation, Care & Adjustment Instructions
Introduction The following instructions will enable you to complete the final assembly and adjustment of your new furniture. Hardware Box Each of the cabinets contains a Hardware box that contains all
More informationStructures of Needle Roller Cages for General Usage
Structure and Features eedle Roller aes for General Usae are bearins which display excellent performance. eedle rollers with extremely small dimensional variations in diameter are incorporated and retained
More informationWSS-Sliding Door Systems - SPRINT. Flexible and exclusive. Varied solutions for single and double leaf all-glass doors.
- SPRINT Flexible and exclusive. Varied solutions for single and double leaf all-glass doors. Limited partnership, based in DE-42579 Heiligenhaus, Local court Wuppertal, HRA 20804 Personal liable partner:
More informationSimplex Baseboard System Baseboard System
Simplex Baseboard System Baseboard System I Complete installation programme I Trouble-free and time-saving installation I Various connection kits for all types of pipe Our service to you I Simplex Products
More information1 Scope. 2 Normative references. 3 Dimensions. Page 2 DIN :
Page 2 1 Scope This standard specifies dimensions and technical delivery conditions for stud bolts with metric thread made of steel, stainless steel or nonferrous metal. 2 Normative references This standard
More informationSection 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
More informationStaples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
More informationSTANDARD GEAR SCREW WORM RATIO 3,5:1
ACCESSORIES FOR VERTICAL AWNINGS/SCREENS STANDARD GEAR SCREW WORM RATIO 3,5:1 Screw worm in aluminium. Crown in brass. Self-brake, through bearings. With or without stop, adjustable up to 19 cycles. One
More information4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
More informationParts Catalog. S-Series Slicer Manual Frozen Option S13. Model:
, 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationProgram overview Group 8
Program overview Group.1 Fittings for lightweight boards.1.0 -.1.1.2 Connecting fittings i Range summary.2.1.3 Adjustable fitting for head and foot ends / height adjustable leg / shelf supports / cabinet
More informationSport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed
Assembly instructions Art.-Nr.: 201 0915 203 4502 Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com
More informationDoor Furniture, Rosettes, Door Holders
Door Furniture, Rosettes, Door Holders Series 2600 B.2 B.9 Security Door Furniture 2600 Accessories Rosettes Series SELINA.700 B.12 B.17 Security Door Furniture SELINA.700, SELINA.750 Inside Door Rosette
More informationPlans. Easy-to-Build Full-size Deluxe Murphy Bed Plan. For more plans, tools and hardware visit rockler.com
Easy-to-Build Full-size Deluxe Murphy Bed Plan Build a full-size Deluxe Murphy Bed complete with decorative molding and matching side cabinets! Plans For more plans, tools and hardware visit rockler.com
More informationMOVENTO. The Evolution of Motion For 1/2" Drawer Material Thickness
The Evolution of Motion For 1/2" Drawer Material Thickness is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE
PLUS 30 for cable carriers Support trays page 304 PLUS Guide channels page 305 RCC Rail Cable Carrier page 309 ECC Emergency Cable Carrier page 30 Strain relief devices page 3 Assembly profile bars page
More informationFootball Goals 7,32x2,44 m
Football Goals 7,32x2,44 m 120x100 mm Professional aluminum football goals 7,32x2,44 m Made of special oval aluminum profile 120x100 mm with double reinforcing ribs. The main frame of the goal powder coated
More informationExponents Bench Cushion
Exponents Bench Cushion Power Drill #2 Phillips Bit Bit Holder Page 1 of 2 939500640 Rev A 1. Place cushion on top of the bench, so the black Coalesse tag is in the right rear corner of the bench. 2. From
More information35mm 110 Deg. Concealed Hinge with Mounting Plate. 35mm 110 Deg. Soft Closing Concealed Hinge. 26mm 95 Deg. Concealed Hinge with Mounting Plate
35mm 110 Deg. Concealed Hinge with Mounting Plate Most economical of our 35mm concealed hinges. 386 41102 00 386 41102 08 386 41102 15 Slide-on Full overlay Self Closing Slide-on Half overlay Self Closing
More information/B INSTALLATION MANUAL
02-001127/B INSTALLATION MANUAL LEVITATION TV MOUNT UNIVERSAL TV MOUNT FOR 55"-75" PANEL TV'S 100 POUND MAXIMUM WEIGHT IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS - PLEASE READ ENTIRE MANUAL
More informationTried-and-tested quality.
Tried-and-tested quality. Rugged single and full-extension drawer slides in tried-and-tested quality for top requirements. www.grass.at, info@grass.eu Roller slides Tried-and-tested quality and functionality.
More informationK12.12 SINGLE LOCKS SERIES 8600 K12 DOORS
K12 DOORS K12.12 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door locks series 8600... K12.12.03 1.1.
More informationFortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.
Installation Instructions for Fortress Horizontal Cable Panel System with UB-05 Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain all
More informationMantelMount. TM1A Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MantelMount TMA Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS TM Thank you for choosing the MantelMount television wall mount. Please read this entire manual before
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationSliding Door Enclosure. Telephone Cleaning. Please retain this manual after installation for future reference and maintenance.
Cleaning All chrome surfaces should be cleaned using a clean damp cloth. No abrasive cleaning agents or materials should be used. General glass cleaner can be used for the screen, but ensure that this
More informationCatalogue. Locks for aluminium. The global leader in door opening solutions
Catalogue Locks for aluminium The global leader in door opening solutions Summary Locks for aluminium 1 POINT LOCKS............................................................ 2 3 POINTS LOCKS...........................................................
More informationAllen & Allen Company
Sliding Door Hardware 71-222 Assembly Single Door Sets up to 100 lbs./door Adjustable, top mount, for door thickness 3/" and up. Included in 71-222 Hardware Set: 7001 Track, two No. 7000 carriers, two
More informationK15.13 FACE FIXED DOOR HINGES K15 DOORS
K15 DOORS K15.13 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General... K15.13.03 2. 2-part hinge...
More informationHAPPY CHICKEN TRACTOR
HAPPY CHICKEN TRACTOR www.thelittlechickenfactory.com Consumer Assembly Instructions 2014 Six-foot unit Picture of six-foot unit shade/rain cover not shown NEW HANDLE INSERT INTO FRAME HOLES WHILE ASSEMBLING
More informationWe recommend using the locking levers on the firmly mountable wall mount housing or panel housing.
Walther multipole heavy duty connectors series DD come with sinle lockin system, series DD and DD 6 with double lockin system., DD 7 and DD 8 are either available with sinle or double lockin system. s
More informationBAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors
Protect Serie 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally adjustable up to 120
More informationAVENTOS lift system. AVENTOS HL lift up. Smooth motion for the lift up. Opening and closing easy and comfortable
lift system Smooth motion for the lift up With HL, the one-part front lifts up parallel to the cabinet. This lift system is ideal for applications in high and wall cabinets with fronts above or in larder
More information