Interior Equipment, Shop Fittings

Size: px
Start display at page:

Download "Interior Equipment, Shop Fittings"

Transcription

1 Interior Equipment,

2 Häfele, the brand you can trust. The innovator of functionality.

3 Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Eilox SHOPTEC Shopfitting system Bracket Wall channel Column Panel fixing element Shelf frame Clothes hanger rail Pharmacy Systems Carrier frame Shop fitting system Display 150 Shop fitting system Single Shop fitting system Display 200 HV Organization drawer PHARMA-ORG Pharmacy system We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.2

4 Contents Bar Railing Systems Gallery railing system Bar railing system Bar railing systems from Hâfele The bar railing system from Häfele represents another individual solution for the project and hotel area that can also be used in the private sector. The railings are available in three different diameters and can be individually bent in accordance with requirements. The comprehensive range of accessories such as railing supports, end caps, glass holders and glass supports makes it possible to create individual designs and blend in with the respective situation in an immaculate, dimensionally accurate way. All of the connections can be either screw-fixed or glue-fixed. (Bar railing systems see page.55) We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.3

5 Information Häfele Functionality: Getting the best from your shop Interior and furniture design always swings between extremes: Simple or opulent, delicate or bulky, straight or rounded, convenient or exclusive. Häfele shows you the right way inspired by the functionality styles and decorative design ideals for all wishes and requirements. DIFLEX Adjusting foot for raised floors (Page.6) Hook-in profile EILOX (Page.7) SHOPTEC Shopfitting system (Page.8) Wall channel (Page.10) Column (Page.12) Round column, Ø60 mm Ø (Page.16) Column connector (Page.19) FF.4

6 Information Bar railing system (Page.55) Gallery railing system (Page.54) Gallery railing system (Page.52) PHARMA-ORG Frame systems (Page.48) HV Organization drawer (Page.47) Shop fitting system Display 200 (Page.41) Shop fitting system Display 150 (Page.33) Shop fitting system Display 150 (Page.33) Shop fitting system Single (Page.38) Shop fitting system Single (Page.38) FF.5

7 Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Area of application: For medium load bearing areas, renovating old buildings or offices and for routing wires, cables and pipes of any kind beneath a floor surface load max. 500 kg/qm, static load, max. 300 kg/qm adjusting screw, aluminium support and foot plate, plastic support plate with burging soft plastic Finish: Adjusting screw galvanized, support and foot plate black with green support plate Version: M8 adjusting screw with SW4 hexagon socket Installation: Adjusting screw with support for knocking into timber (subconsfunction), foot plate plug fitting onto adjusting screw Advantages Efficient assembly Drilling only needed to countersink screw with pre-mounted support No dowels, screwing or preparing work required-just set in place Quick alignment Can be walked on immediately Impact sound reduction of approx. 33dB due of soft plastic support plate Installation Squared edge timber Floor DIFLEX Adjusting foot Squared edge timber Adjusting screw Prepare squared edge timber/levelling batten Knock in screw with pre-mounted support from beneath Height mm Turn squared edge timber/levelling batten and align at a distance of 500 mm Level out height of squared edge timber/ levelling batten using adjusting foot Lay and fix the floor covering Distance D mm We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.6

8 Room and Frontwall Systems Hook-in profile EILOX for easy construction of wall claddings Area of application: For wall claddings, paintings, etc. Material: Aluminium Version: Screw holes at 96 mm intervals, For Hospa 5.0 or Varianta 6.0 Installation: For screw fixing Exact positioning by means of hook-in lips Same rail for wall and claddong component With ridge on the underside, e.g. for cable routing Building material class A1 according to DIN 4102 part 4/03.81 Fire behaviour of building materials and elements Lenght mm 2, We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Note max. 1,000 mm height distance between 2 hook-in profiles. FF.7

9 SHOPTEC Shopfitting system SHOPTEC is a highly flexible and universal shopfitting system. Various basic elements can be combined with each other, allowing the best possible use to be made of the available space. The garment display rails are easy to install in columns and wall channels and no tools are required. Wall channels Round columns Columns Brackets Squared edge timber Gondola head frame SHOPTEC provides you with a wide range of garment display rails and therefore individual ways of successfully displaying merchandise. Pitch length, length over engagement hooks and effective length Standard pitch length, length over engagement hooks and effective length guarantee compatibility between wall channels, columns and available components such as shelf supports or support rails. Dimensions for column 30 x 30 mm A Internal width 595/970 B Pitch length 625/1,000 C Length over engagement hooks 621/996 A B C Dimensions for column 60 x 30 mm A Internal width/effective length 595/970 B Pitch length 625/1,000 C Length over engagement hooks 621/996 A B C Dimensions for round column Ø 60 mm Ø A Internal width/effective length 565/940 B Pitch length 625/1,000 C Length over engagement hooks 621/996 A B C Safety requirements Shelf systems must comply with the technical safety requirements defined in EN 1727:1998. Among other things, this means that shelf systems must be secured to prevent tipping. The surface must be suitable or appropriately reinforced for erecting a shelf system. The storage equipment and device guidelines defined in ZH 1/428 of the employer s liability association guidelines must be complied with. We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.8

10 Bracket Area of application: Supporting shelves, for single or double slotted wall channels and columns Finish: Plastic coated white,ral 9010 Installation: Hooking into slots in the wall channel or column Information The specified load capacity only applies with evenly distributed load per bracket. Standard version Information Glass shelves can be used in combination with shelf supports and suction pads Height mm Depth D mm We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). U-Bracket for use in double slotted wall columns Finish: Plastic coated, White RAL 9010 Version: With 2 hooks, with two Ø5.2 mm drillings at bottom for screw fixing the wooden shelf, angle cannot be adjusted Ø Height mm Depth D mm FF.9

11 Wall channel Finish: Plastic coated white, RAL 9010 U-Shape Channel Width mm Single slotted Lenght L mm , , , Double slotted , , , Single slotted Double slotted We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.10

12 Wall channel Finish: Plastic coated Interval: 50 mm Semi-circular, single slotted Colour: White aluminium, RAL 9006 Length L mm , , , Cover cap for semi-circular, single slotted wall channel Material Plastic Packing: 6 pcs. Finish White aluminium, similar RAL We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). U-Shaped channel Single slotted Double slotted Length L mm Single slotted Packing: 1 pair White, RAL , , , , Double slotted 1, , , , White aluminium, RAL 9006 FF.

13 Fixing material for wall channel Supplied with 20 Dowels (Ø6 x 36 mm) 20 Chipboard screws (Ø4.5 x 60 mm) 80 Self adhesive caps ever 20 in colours brown, white, black and white aluminium Ø Ø Fixing material wall channel Packing: 1 or 10 pcs Column Material thickness: 2 mm Interval: 50 mm 30 x 30 mm (W x D) Single slotted on two sides Single slotted on four sides Double slotted on two sides Length L mm White RAL 9003 Single slotted on two sides White aluminium RAL , , Single slotted on four side 2, Double slotted on two sides 2, , We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.12

14 Cover cap for 30 x 30 mm column Material Plastic Finish White, similar RAL 9003 White aluminium, similar RAL Column fastening for 30 x 30 mm column Supplied with 1 Ceiling pin clamp screw with centering tip 1 Top tube insert with M10 threaded end cap 1 Base unit Material Finish Steel White, RAL White aluminium, RAL Packing: 1 set 60 x 30 mm (W x D) Slots: Double slotted on two sides (side slots only suitable for connecting) We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Column insert for 60 x 30 mm column Area of application: For use with ceiling clamping or adjusting screw Thread: M10 Version: Column insert for bottom with supporting surface for rear panel Length L (mm) Number of lateral slots White, RAL 9003 White aluminium, RAL , , , , Material Zinc alloy Finish Bright Version For top and bottom For bottom FF.13

15 Cover cap for 60 x 30 mm column Area of application: Covering top end of column Material Plastic Finish White aluminium, similar RAL Column foot for 60 x 30 mm column Finish: Plastic coated Material thickness: 2 mm Material Steel Finish White aluminium, RAL Mounting bracket for 60 x 30 mm column Area of application: Wall mounting of 60 x 30 mm columns Version: With snap-off points for shortening length of bracket Safety lock screw set for 60 x 30 mm column Material Steel Area of application: Securing connections of mobile shelves Dimensions: M8 x 50 Version: With SW 13 square nut Material Steel Packing: 10 pcs. Finish Galvanized Finish Galvanized We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.14

16 Column support rail for 60 x 30 mm column Finish: Plastic coated Version: Plug in, with 2 safety clips A Internal width 595/970 B Pitch length 625/1,000 C Length over engagement Order information hooks 621/996 A B C Connections with a pitch length of 1,250 mm are also available for Information fixing rear panels and wall claddings. Connections of mobile shelves (with castors) must be secured with Please order safety lock screws separately. safety look screws. Pitch length L mm White, RAL 9003 White aluminium, RAL , We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Foot, plug in for 30 x 30 and 60 x 30 mm columns foot, plastic cover cap and foot plate Finish: Plastic coated foot Height adjusting facility: +40 mm with height adjusting screws Pitch length L mm White, RAL 9003 White aluminium, RAL FF.15

17 Round column, Ø60 mm Ø Finish: Plastic coated Material thickness: 2 mm Slots: Double slotted on four sides Interval: 50 mm Standard version Length L mm Colour 1,410 White aluminium, RAL , , Column foot for standard version Foot part for standard version, lateral mounting Material Steel Depth: 330 mm Version: With M10 thread for use with height adjusting screws or castors Installation: Screw fixing Material Steel Colour White aluminium, RAL 9006 Colour White aluminium, RAL We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.16

18 Column insert for standard version Diameter: 60 mm Thread: M10 Material Steel Colour Bright Version screw fixing to foot part Version: With M10 threaded plate Supplied accessories 1 Spacer sleeve 1 Plastic washer, white (saddle washer) 1 Shim 1 M10 x 80 Hexagon bolt Length L mm Colour 1,410 White aluminium, RAL , Foot part for version screw fixing to foot part Diameter: 60 mm Single-sided Dimension: M10 x 50 height adjusting screw with SW17 hexagon Thread: M10 Height adjusting facility: +40 mm with 2 height adjusting screws or castors with M10 threaded bolt Version: With 2 cover caps and 2 feet with height adjusting screw We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Double-sided Length L mm Single-sided Effective depth N mm Colour White aluminium, RAL 9006 Double-sided White aluminium, RAL FF.17

19 Version screw fixing to foot plate With M10 threaded insert, single-sided Length L mm Colour 1,410 White aluminium, RAL Foot plate for version screw fixing to foot plate Supplied accessories 1 Shim 1 M10 x 25 Hexagon bolt Information This foot plate is exclusively designed for use with round column Diameter mm Colour 550 x 30 White aluminium, RAL Accessories for round columns, Ø60 mm Ø Column insert Upper column end piece Material Plastic Finish: Plastic coated Material Steel Colour White aluminium, RAL 9006 Colour White aluminium, RAL We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.18

20 Column connector Finish: Plastic coated Colour: White aluminium, RAL 9006 A Internal width 565/940 B Pitch length 625/1,000 C Length over engagement hooks 621/996 A B C Information For mobile connections, safety lock screws must be used Internal width A mm Pitch length B mm , We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Ceiling clamping screw Area of application: Clamping the round column Material: Plastic plate Finish: Plate white, similar RAL 9003 Thread: M10 x 60 mm Version: With centering tip and pivotable ceiling plate Material Steel Packing: 1 or 100 pcs. Colour Galvanized FF.19

21 Accessories for columns Wall spacer Area of application: Wall mounting double slotted columns Finish: Plastic coated Rigid Version Rigid White, RAL 9003 White aluminium, RAL Adjustable Information The securing hole must be drilled through and Securing hole secured with a pin during installation. Length L mm White, RAL 9003 White aluminium, RAL We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.20

22 Height adjusting screw M10 With stainless steel foot plate screw, plastic glide Finish: Screw galvanized, foot plate ground, glide black Drive: Top with SW 5 hexagon socket, bottom with SW 8 square Thread length mm Packing: 1 or 25 pcs With steel foot plate screw and foot plate, plastic glide Finish: Screw galvanized, foot plate nickel plated, glide black Drive: SW 12 square Thread length mm Packing: 1, 100 or 500 pcs. We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). With rigid plastic foot plate screw Finish: Galvanized screw, black plate Drive: SW 17 hexagonal Thread length mm Packing: 1 or 100 pcs FF.21

23 Panel fixing element Universal clip Area of application: For attaching panels, walls etc. with thickness of 4 22 mm to double slotted columns Installation: Clipping into slots in column Installation Material Colour Flush fitted panel in front of column Rebated panel in front of column Plastic Transparent Information Can only be used with rear panel hooks We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.22

24 Rear panel hook For hooking into side slots for 30 x 30, 60 x 30 and Ø60 mm column Ø Installation Finish Bright Packing: 1 or 10 pcs For hooking into double slotted 30 x 30 and 60 x 30 mm columns from the front Finish: Plastic coated Colour Installation White aluminium, RAL Packing: 1 or 10 pair We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). For hooking into side slots of double slotted columns Installation 5.5 Finish: Plastic coated Colour White aluminium, RAL 9006 Packing: 1 or 10 pcs FF.23

25 Centre panel hook Installation Area of application: For hooking into side slots of single and double slotted columns Finish Bright Packing: 1 or 10 pcs Rear panel support For hooking onto column support rail for 60 x 30 mm column Area of application: Installing the panel between columns Finish: Galvanized Installation Flush fitted with non-rebated panel Mounting with spacer clip with rebated panel Information The support can only be used in combination with 60 x 30 mm columns with the associated connector Spacer clip for rear panel support Suitable for Non-rebated panel Rebated panel Depth mm Order information Also use spacer clip when installing rebated panels. Please order separately Material Plastic Colour Black We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.24

26 Double bracket for installing between columns Length: mm Version: With 2 hooks For 30 x 30 mm Area of application: For wooden shelves Finish: Plastic coated Depth D mm Load bearing capacity 40 kg Packing: 1 or 10 pair White, RAL 9003 White aluminium, RAL Load bearing capacity 65 kg For round column Ø60 mm Ø Area of application: For glass and wooden shelves Finish: Plastic coated white aluminium, RAL 9006 Version: With 2 suction pads for glass shelves We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Suction pads for brackets Depth D mm Packing: 1 or 100 pcs. Area of application: Placing glass shelves onto brackets, double brackets and shelf supports Packing: 20 or 100 pcs Material Plastic Colour Transparent FF.25

27 Shelf frame Area of application: Inserting wooden shelves with thickness of 19 mm Finish: Plastic coated Installation: For hooking into slots in column A Internal width 565/940 B Pitch length 625/1,000 C Length over engagement hooks 621/996 A B C Information The pitch length varies depending on the columns that are used, single or double slotted. Dimensions for wooden shelves with W 625 and D 370: 613 x 338 mm W 1,000 and D 470: 988 x 438 mm Load bearing capacity 50 kg, inclinable Version: With 2 hooks and 2 grooves for dividers, inclinable (+10, 0, 20 ) Installation: Hooking into slots in wall channel or column depending on required angle of incline When insert wall channels shell frame only inclined down at 20 installable. Load bearing capacity 80 kg, rigid Length over engagement hook C mm Packing: 2 pcs. Version: With 3 hooks and 2 grooves for dividers Packing: 2 pcs. Pitch length B mm White aluminium, RAL , Length over engagement hook C mm Pitch length B mm White aluminium, RAL , We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.26

28 Book bracket Finish: Plastic coated Version: With 3 hooks Installation: Hooking into single or double slotted wall channels and columns Material Steel Packing: 4 pcs. Colour White aluminium, RAL Basket Finish: Plastic coated white aluminium, similar to RAL 9006 Pitch dimension: 1,000 mm Load bearing capacity: 20 kg Version: With 2 suitable brackets for basket Installation: Hooking into single or double slotted wall channels and columns We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Material Steel Colour White aluminium, RAL FF.27

29 Clothes hanger rail Area of application: For single or double slotted wall channels and columns Length: 400 mm Version: Inclined, with 2 hooks and 9 hook-in positions Installation: Hooking into slots in wall channel or column Material Steel Colour Chrome plated Clothes rail Installation: Inserting into clothes rail support of bracket Material Steel Colour Chrome plated Clothes rail support Trim cap Installation: Supporting clothes rail between 2 double slotted columns Material Plastic Installation: Plugging into clothes rail Material Plastic Colour White, RAL 9003 Colour Grey We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.28

30 Clothes rail bracket Support rail Area of application: Mounting clothes rail to single or double slotted wall channels and columns Finish: Plastic coated Load bearing capacity: 30 kg Version: With 3 hooks and oval clothes rail support Installation: Hooking into slots in wall channel or column Material Steel Colour White, RAL Application: Holding clothes hangers and clothes hanger rails on single or double slotted wall channels and columns Finish: Chrome plated Version: With flat oval rail 15 x 30 mm, welded Installation: Hooking into slots in wall channel or column White aluminium, RAL 9006 Clothes hanger rail for clothes rail bracket Length over engagement hook C mm Pitch length B mm We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Finish: Plastic coated, with chrome plated extending rod Version: With extending rod Installation: Screwing to bracket with clothes rail support Supplied with fixing material Material Steel Colour White, RAL 9003 White aluminium, RAL , FF.29

31 Carrier frame Application: Carrying clothes hangers and clothes hanger rails on single or double slotted wall channels and columns Finish: Chrome plated Version: With flat oval tube 15 x 30 mm, welded Installation: Hooking into slots in wall channel or column Length over engagement hook C mm Pitch length B mm , Removable display rail Finish: Chrome plated Installation: Hooking into the support rail Carrier arm, straight Ø Depth D mm Packing: 1 or 10 pcs. Installation: Hooking into support rail and support frame Diameter mm Material Steel Finish Chrome plated We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.30

32 Carrier arm, angled Installation: Hooking onto support rail and support frame Material Steel Finish Chrome plated Clothes hanger rail, inclined with balls Version: Angle of incline 30, with 9 balls for hanging clothes hangers Installation: Hooking onto support rail and support frame Material Steel Finish Chrome plated We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.31

33 Shop fitting system Display 150 Linear design with high flexibility The Display System 150 system provides countless combination options due to its different finishes and extensive range of display rails. The 150 mm groove intervals and continuous profiles make it possible to display products of any kind in the best possible way regardless of whether they are big or small. The display rails and shelves are also available in different materials, and are attached without the need for tools. Shop fiting system Single A classic design with a wide range of possibilties The Single shopfitting system makes it possible to present many different product ranges in an individual way. All elements can be used individually or combined. The different display rails and shelves are inserted into the base plate without using tools and can be replaced at any time. Any supporting structure can be used. Shop fitting system Display 200 Clear design for demanding customers Display 200 system is combine function and fitting to this system. The point syspension if not hanging any display arm is make linear decorate plate. All elements can be used individually or combined. The diffent display arms are inserted into point syspension or rail syspension without using tools and can be replaced at anytime. We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.32

34 Shop fitting system - Display 150 Wall panel Hook-in profile, rectangular Area of application: For sliding into groove of wall panel Material: Aluminium Finish: Bright Length 1200 mm Packing: 1 or 14 pcs. Material: Chipboard Finish: Melamine coated Order reference Dimensions (W x H x D): 1,200 x 1,200 x 19 mm Please order 7 additional hook-in profiles for each panel and Version: Prepared with 7 complete grooves and 1/2 grooves on the 1 additional hook-in profile for panel connection. We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). horizontal edge for connecting panels Colour White Marple Pear Light beech Packing: 2 pcs. Order reference Please order hook-in profiles separately Special sizes available on request. FF.33

35 Clothes hanger rail Finish: Chrome plated Straight with end cap Version: Rail Ø16 mm Length mm Inclined Version: Oval rail 30 x 15 mm, with 8 hook-in positions Dimensions mm 310 x Curved Version: Arm Ø6 mm, with 7 hook-in positions Ø Dimensions mm 265 x 150 mm We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.34

36 Display rail Finish: Chrome plated With straight pin Version: Rail Ø6 mm Area of application: Suitable for DIY packaging Ø Depth T mm With loop rail Version: Rail Ø4 mm Depth T 200 mm mm We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Carrier frame Version: Oval clothes rail 30 x 15 mm Finish: Chrome plated polished Width mm FF.35

37 Display rail Finish: Chrome plated Side bracket Area of application: Lateral support for shelves Version: Supporting plate with 2 slots for shelf attachment Wide support surface for increased load capacity Depth T mm Packing: 1 pair Centre bracket Area of application: Lateral and centre support for shelves Version: Supporting plate with 4 slots for shelf attachment Wide support surface for increased load capacity Depth T mm We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.36

38 Bracket for glass shelves Finish: Chrome plated Depth T mm Packing: 1 pair Buffer, self-adhesive Material: Plastic (polyurethane) Installation: Self-adhesive (permanently self adhesive by non-aging acrylate adhesive) Shore hardness A Moulded in blocks (set) UV resistant, no yellowing, wear-free Colour Transparent We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Partition holder Packing: 50 pcs. Finish: Chrome plated Depth T mm Packing: 1 pair FF.37

39 Information Shopfitting system - Single The Single shopfitting system consists of: Support plate Garment display rails (clothes hanger rail or shelf support) Installation The support plate is recessed and fixed to the rear of the panel by screwing it on with a plate. The garment display rail is hooked into the support plate. We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.38

40 Support plate Material: Zinc alloy Finish: Chrome plated matt Depth: 19.5 mm, 10 mm visible Version: With aluminium rear plate Installation: For groove mounting into panel Fixing material: 4 Screws M5 x 18 mm Supplied with 1 Support plate 4 Screws M5 x 18 mm Support plate Clothes hanger rail We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Finish/colour: Plastic coated, fine structure, white aluminium, similar to RAL 9006 Installation: For suspending in support plate Version: With stop Straight Inclined, 60 Depth T mm Depth T mm Order reference Support plate must be ordered separately. FF.39

41 Shelf support Area of application: For supporting glass or wooden shelves Finish/colour: Plastic coated, fine structure, white aluminium, similar to RAL 9006 Version: With 4 O-rings for shelf support and clothes rail with lateral adjustment Shelf support Order reference Support plate must be ordered separately. Shelf with labelling strip Finish/colour: Plastic coated, fine structure, white aluminium, similar to RAL 9006 Version: With insertion slot for product description Shelf with labelling strip Order reference Support plate must be ordered separately We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.40

42 Shop fitting - Display 200 Point and rail suspension: Easy and quick Installation on different materials and directly on masonry wall. No special tools for processing and installation required. Processing and installation: Pre-drill holes in workshop Panels can easily be stacked for transport Attach panel, e.g. with EILOX hook-in profile, to wall Secure point and rail suspensions with screws Hook in display arms, shelf supports and shelves without tools Further advantages for the customer Additional point or rail suspension can be installed on site without removing the panel, if required. Point suspension Area of application: For hooking in display arms, shelf supports and shelves Finish: Cover cap: Nickel plated matt For panel thickness: From 18 mm Load bearing capacity: Approx. 15 kg We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Installation with screw-in sleeve and M6 screw Supplied with 1 Screw-on plate and 1 support plate 2 Grub screws SW 2 1 Cover cap 1 Set fixing material for wooden panel 8 mm drill hole for screw-in sleeve Screw in screw-in sleeve, connect screw-on plate and support plate with screws and align Screw in grub screws (anti-twist device) Clip on cover cap Version Installation with sleeve and M FF.41

43 Rail suspension Area of application: For hooking in display arms, shelf supports and shelves Finish: Cover cap: Nickel plated matt For panel thickness: From 18 mm Load bearing capacity: Approx. 25 kg Installation on wooden panel with chipboard screw Drill hole in panel for 4.5 mm chipboard screw Connect rail with screws Clip on cover cap, an additional substructure must be installed for panel thicknesses below 18 mm For screw fixing directly on masonry wall (optional) Supplied with 1 Rail 1 Cover cap Length mm 1, , , Order reference Fixing material for rail suspension not supplied, please order separately. We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.42

44 Display arms Area of application: For point and rail suspension Finish: Nickel plated matt Version: With hook-off protection device for support plate, with plastic buffer to prevent dents on the panel Straight Area of application: For hanging clothes hangers Version: With stop pin Depth T mm Levels Area of application: For hanging clothes hangers Version: With 2 stop pin We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Curved Depth T mm Area of application: For hanging clothes hangers Version: With 10 stop pin Depth T mm FF.43

45 Shelf supports and display rails Area of application: For point and rail suspension Finish: Nickel plated matt Version: With hook-off protection device for support plate, with plastic buffer to prevent dents on the panel Wooden and glass shelf support Area of application: For 8 mm wooden or glass shelves Version: With transparent glass shelf supports and removable glass fixing brackets with plastic cap Depth T mm Wooden and glass shelf support for display Area of application: For 8 mm wooden or glass shelves, for holding display rail Version: With transparent glass shelf supports and removable glass fixing brackets with plastic cap, with ring for display arm Ø21 mm Ø Depth T mm We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.44

46 Carrier for display rail Area of application: For holding display rail Version: With ring for display arm Ø21 mm Ø Depth T mm Display rail Ø21 mm Ø Area of application: For sliding into carrier arm, for hanging in cloth hanger Version: With ring for display arm Ø21 mm Ø Length L mm , , Wooden and glass shelf supports We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Area of application: For 8 mm wooden or glass shelves, e.g. for shoes or bags Version: With transparent glass shelf supports and removable glass fixing brackets with plastic cap Depth T mm FF.45

47 Shelf Area of application: For point and rail suspension, for displaying products, for hanging clothes hangers Material: Stainless steel Finish: Brushed Version: With hook-off protection device for support plate, with 22 apertures for clothes hangers Depth T mm Dim. A mm , We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.46

48 HV Organization drawer The HV drawer is qualified for use at shoptitting. Through the low cover height from 64 mm the HV drawer is very well applicable, where are to be placed quite a few particles at immediate space. By the high-quality of guide with self-closing drawer runner and damping we get at best running characteristics and highest comfort. From cover raster 64 mm Longitudinal and lateral dividers enabled a individual organization. All single components may be combined as necessary. Drawers Guides Divider Rail Locks Inserts We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Insert made of beech enabled a optimal organization and presentation theirs products. By using of longitudinal and lateral dividers the division may be conform optimal to their requirements. Longtudinal divider with slot adequate for any installation depth Cross divider with different surfaces. Adequate card holder enabled a marking of division FF.47

49 Pharmacy Systems PHARMA-ORG Storage and pharmacy installation system PHARMA-ORG Frame systems Space-saving stocking and organizing The storage and pharmacy installation system basically consists of following components: Basic frame Vertical frame Guide frame/guides Drawers With different possible combinations the system can be adapt to nearly any situation. Such may circumvented on site available hindrances how drainpipes or water conduits by application of varied depth of drawers, which enabled a optimal room usage. Furthermore the bulky accessories offer the possibility of an optimal storage and organization. The different label systems enabled a excellent overview and a quick access to the desired product. Guide frame 2 pcs./column (attached at each 1/3 of the column height) Base plate, length 60 mm Tie bar Base plate, length 100 mm Basic frame Guide rail Spacer bracket Tie bar Extension We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.48

50 Pharmacy Systems PHARMA-ORG Base frame Quick and easy assembly A stable basic frame is produced independently of the vertical frame, it is placed on the floor and horizontally adjusted using the adjustable base plates. It is advisable to attach the base plates to the floor after they have been aligned. The basic frame is the basis of the PHARMA-ORG drawer system. The individual vertical frames are inserted into the basic frame and screwed in place, preventing them from moving forwards or sideways. Planning the basic frame Basic frames are available for 1 5 columns. The adjustable base plates in the basic frame are 60 mm long on the outsides, and 100 mm long inside the central vertical frame (two-sided). A 100 x 100 mm foot plate is recommended for distributing the pressure on soft surfaces such as screed. installation depth Total length = (400 mm) x number of columns + 20 mm vertical frame thickness + side panel material thickness We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Basic frame extensions An extension for 5 additional columns is available for basic frames for 1 5 columns. A combination of the 5 basic frames with the extension will solve any layout problem. PHARMA-ORG Vertical frames and panel intervals Vertical cross-section Any panel height is available in steps of 25 mm, starting at 100 mm. The maximum panel height of 250 mm should not be exceeded. The vertical frames are available with and without central locking. Information We can also supply special sizes up to a total height of 2,500 mm on request. FF.49

51 Pharmacy Systems PHARMA-ORG Drawers and extensions Drawer depth 1,220 Useful depth 1,157 Drawer depth 1,020 Useful depth 948 Drawer depth 820 Useful depth 748 Drawer depth 620 Useful depth 548 Extension length Installation depth Drawer depth Sewage pipes Water pipes Iron beam PHARMA-ORG Drawer variations and accessories Double flue Examples at ground plan A combination of drawer types with four different installation depths overcomes structural obstacles in a space-saving way and provides a solid, evenstorage system front. Functional, stylish and user-friendly The drawers can be equipped with front panels made of solid wood, glass or plastic and inserts made of wood, plastic, textile, glass or metal. They therefore make an impression on the pharmacy s image and adapt to the overall architectural impression. The drawers can be optionally equipped with a wooden panel that is available in different types of wood for suspending from the punched keyholes or with Vario frame handles for sliding onto the front panel. The drawer bottoms are coated with melamine or made of perforated metal or acrylic glass. They are designed to withstand weights of approximately 25 kg (distributed over the entire drawer). We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.50

52 Pharmacy Systems Equipment Suitable for all PHARMA-ORG drawers Base with melamine coating Clip in partition Mini compartment partition with extension Drilling dimensions for front panel attachment Label holder with clip in sliding divider Acrylic glass base Acrylic glass base Bases made of acrylic glass are available for ease of use. Transparent acrylic glass bottoms allow you to view the contents of drawers placed above eye level from underneath. Perforated metal base Perforated metal base The perforated metal bases with square punched holes are insensitive to soiling and provide good ventilation. Lower edge of panel We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Clip on panels and railing system for flexible drawer heights A bordering system with panel that can be screwed to the drawer is available for items with particularly large volumes (total height = 2 x front panel height). Side rail Fitting the front additional panel Front clip on panel Side rail Rear additional panel, fitted Rear clip on panel FF.51

53 Bar Railing Systems Gallery railing system Material: Stainless steel, SUS 304 Finish: Matt brushed or PVD coated brass coloured Gallery rail Length: 2,500 mm solid material Diameter mm Stainless steel coloured Brass coloured Gallery rail post Material: Zinc alloy Finish: PVD coated Diameter: 10 mm (for 6 mm rail) or 15 mm (for 10 mm rail) For 1 rail Gallery rail end post with blind hole Press-in dowel for wood For 2 rails Gallery rail centre post with through hole Threaded sleeve for glass For glue fixing to glass We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.52

54 Bar Railing Systems Gallery rail post for 1 rail 6 mm Gallery rail post for 1 rail 10 mm Installation Stainless steel coloured Brass coloured Installation Stainless steel coloured Brass coloured With through hole as centre post With through hole as centre post Press-in dowel Press-in dowel Threaded sleeve Threaded sleeve For glue fixing For glue fixing With blind hole as end post With blind hole as end post Press-in dowel Press-in dowel Threaded sleeve Threaded sleeve For glue fixing For glue fixing Gallery rail post for 2 rail 6 mm Gallery rail post for 2 rail 10 mm We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Installation With through hole as centre post Press-in dowel Threaded sleeve For glue fixing With blind hole as end post Press-in dowel Threaded sleeve For glue fixing Stainless steel coloured Brass coloured Installation With through hole as centre post Press-in dowel Threaded sleeve For glue fixing With blind hole as end post Press-in dowel Threaded sleeve For glue fixing Stainless steel coloured Brass coloured FF.53

55 Bar Railing Systems Support rings for 6 mm rail Installation for gallery rail end post for gallery rail centre post 3 90 for gallery rail end post for gallery rail centre post Area of application: For angled rail system or as design variant Materail: Zinc alloy Finish: PVD coated Version For 6 mm rail Stainless steel coloured Brass coloured 180 for gallery rail centre post for gallery rail end post for gallery rail end post for gallery rail end post Installation dimensions Dim. A = Pitch length Dim. B = Rail length Dim. B = Dim. A-3 mm (one sided installation on gallery rail post) Dim. B = Dim. A+4 mm (two sided installation on gallery rail post) We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.54

56 Bar Railing Systems Bar railing system The multitude of components make this system extremely flexible and usable almost anywhere. There are many ways of fixing rails to wall, floor and ceiling surfaces: Installation with railing support brackets Installation information Installation with handrail support brackets A support bracket or holder has to We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). be mounted every 700 mm and at a distance of 150 mm from each end of the rail. Support brackets or holders should be mounted at both ends of elbow sections. The rails can be screwed or glued to the holders. Both methods provide comparable stability, but glued connections are permanent. Installation with foot rail support brackets Direct fixing of rail ends to surfaces FF.55

Interior Equipment/Shop Fittings

Interior Equipment/Shop Fittings Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories

More information

Table and Furniture Base Fittings Plinth Adjusting Fittings

Table and Furniture Base Fittings Plinth Adjusting Fittings Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.

More information

Organisational Kitchen Fittings Kitchen Cabinet Accessories

Organisational Kitchen Fittings Kitchen Cabinet Accessories Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic

More information

Connector Technology, Shelf Supports Connection Fittings

Connector Technology, Shelf Supports Connection Fittings MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid

More information

Material Packing Brown Grey Pine Black White

Material Packing Brown Grey Pine Black White RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24

More information

Locks and Catches Catches and Furniture Bolts

Locks and Catches Catches and Furniture Bolts Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701

More information

Table and Furniture Base Fittings Table Legs and Table Bases

Table and Furniture Base Fittings Table Legs and Table Bases Square Stainless steel coloured laquered square Bright laquered square Area of application: For table and coffee tables Material: Plastic glide Finish/Colour: Table leg brushed, glide black Cross section:

More information

Door Hinges Drill-in Hinges

Door Hinges Drill-in Hinges Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2

More information

Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .

Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie  . Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for

More information

Executive furniture. Moka

Executive furniture. Moka Executive furniture Moka Features Authentic executive furniture with a clean design! Moka combines conviviality and tradition with its curved lines and melamine panel legs. Functional items with various

More information

Kitchen Fittings Hanging Cabinets and Accessories

Kitchen Fittings Hanging Cabinets and Accessories Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting

More information

Accessories and workbenches

Accessories and workbenches Workbenches To complete the Elabo furnishing systems, we also provide workbenches and organisable steel plate base cabinets. Steel cabinets, shelves and shelf trolleys are available for storage of materials

More information

FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS

FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery

More information

Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge

Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door

More information

FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS

FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories

More information

aluline 1 These aluboard8 rails are black anodised, as per customer s request.

aluline 1 These aluboard8 rails are black anodised, as per customer s request. p. 8 aluline These aluboard8 rails are black anodised, as per customer s request. 2 The steel shelves are powder coated in black in order to match with the rails. 5 Of course, the mobile shop stands made

More information

Adjustable Feet Castors Accessories for Floor Elements

Adjustable Feet Castors Accessories for Floor Elements Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible

More information

Hardware Fitting Accessories Bolts

Hardware Fitting Accessories Bolts Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless

More information

SPEEDFRAME T h e s p e e d y w a y t o b e i n d i v i d u a l

SPEEDFRAME T h e s p e e d y w a y t o b e i n d i v i d u a l SPEEDFRAME T h e s p e e d y w a y t o b e i n d i v i d u a l T h e a l l p u r p o s e c o n s t r u c t i o n k i t SPEEDFRAME All materials are kept close to hand in this specially designed Speedframe

More information

Audience. Technical specifications English Applicable from by art.collection

Audience. Technical specifications English Applicable from by art.collection Audience Technical specifications English Applicable from 01.10.2007 by art.collection INDEX 1 Tables 3 1.1 Synoptic 3 1.2 Tops 12 Materials and edges Reinforcement beams 1.3 Structural channel and horizontal

More information

Hinges and Flap Fittings Information

Hinges and Flap Fittings Information Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,

More information

Executive furniture KARA

Executive furniture KARA Executive furniture KARA Features Kara combines contemporary fi nishes and effi cient offi ce solutions! Sturdy melamine desktops and expansive work surfaces, combined with practical storage solutions

More information

WALL SHELVING SYSTEM 250/750

WALL SHELVING SYSTEM 250/750 468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469

More information

STORAGE & SHELVING SYSTEM - INSTALLATION GUIDE

STORAGE & SHELVING SYSTEM - INSTALLATION GUIDE STORAGE & SHELVING SYSTEM - INSTALLATION GUIDE If you have ordered storage drawers, shelving, hanging rails or shoe racks this guide will help you install your storage and shelving system, together with

More information

Shelving for picking STORAGE TECHNOLOGIES & MATERIAL HANDLING

Shelving for picking STORAGE TECHNOLOGIES & MATERIAL HANDLING M7 Shelving for picking General features - Storage system for manual picking of products following the man-to-goods principle - Possibility of storing medium to heavy loads - Easy assembly - Gauging between

More information

Silent Aluflex 80 Sliding door system: A wealth of options for peoples who want the best

Silent Aluflex 80 Sliding door system: A wealth of options for peoples who want the best Silent Aluflex 80 Sliding door system: A wealth of options for peoples who want the best Escape the mundane and discover something special: Unusual inspirations and surprising solutions for your space

More information

Plug sockets. page 15. Assembly instructions. page 2-3 Assembly material. page 4-6 Insertable parts. page 7-14

Plug sockets. page 15. Assembly instructions. page 2-3 Assembly material. page 4-6 Insertable parts. page 7-14 CONTENTS Introduction New colours version: PP-A-14-ENG PERFOPLUG BASE Plug sockets. page 1 Assembly instructions. page 2-3 Assembly material. page 4-6 Insertable parts. page 7-14 PERFOPLUG PREMIUM Plug

More information

Company profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS

Company profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS Furniture fittings Company profile TOKOZ a.s. is a company working in the field of security mechanisms for more than 90 years. Thanks to years of experience we have become real experts on manufacturing

More information

MADE IN GERMANY. Developed & Manufactured By. Drawer Runner System.

MADE IN GERMANY. Developed & Manufactured By. Drawer Runner System. MADE IN GERMANY Developed & Manufactured By Drawer Runner System www.hafele.com MADE IN GERMANY Overview BASI SYSTEM Drawer sides with multi-functional benefi ts The Moovit drawer system provides completely

More information

Technical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard

Technical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.

More information

Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7

Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7 FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track

More information

Installation Instructions

Installation Instructions by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...

More information

FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS

FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT

More information

14/08/15 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA

14/08/15 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA 4/08/5 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA PINETOWN BALLITO KRABY DROP DOWN with Kimana Hinges (pg 3) For further information: www.italianaferramenta.com > CATALOGUE

More information

Technical Product Description

Technical Product Description Worktops 5. Thickness material structure Front edge Bottom face coating 40 mm, 50 mm Laminate according to standard: EN 438 Wood pore or relief, matt or gloss 2 x Radius 3 mm, 6 mm or 8 mm depending on

More information

KWS Handrail Systems. Architectural Hardware

KWS Handrail Systems. Architectural Hardware KWS Handrail Systems Architectural Hardware Technical Information KWS Handrail-Systems - the flexible solution System for handrails in stainless steel and timber Completely pre-assembled or single components

More information

Hardware Fitting Accessories Door Seals

Hardware Fitting Accessories Door Seals Areas of application Protection against cold, draught and vermin Reduces light leakage, sound insulation Smoke control, fire resistance Reduces the energy consumption of air conditioning systems (see following

More information

ASSEMBLY GUIDE. Mia Narrow Bookcase

ASSEMBLY GUIDE. Mia Narrow Bookcase ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step

More information

800-753-9688 sales@novadisplay.com www.novadisplay.com 6.0mm Rod Fixings Components 6mm Basic Rod Fixings RAS TOP/BOTTOM FIXINGS FOR ROD - Includes Spring Tensioner, top/ceiling and bottom/floor fixings

More information

77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.)

77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.) ARCHIMEDE ST.102-4ENG SPECIFICATION Range: ARCHIMEDE Design: Caimi Lab 5203-GA, 5203-BO, 5213-GA, 5213-BO, 5223-GA, 5223-BO, 5233/3-GA, 5233/3-BO, 5241/3-GA, 5241/3-BO, 5243/3-GA, 5243/3-BO, 5245/3-GA,

More information

INSTALLATION GUIDE. 1. Overview. 2. Measuring. 3. Tools & fixings you will need B C. Opening Width. Opening Height

INSTALLATION GUIDE. 1. Overview. 2. Measuring. 3. Tools & fixings you will need B C. Opening Width. Opening Height INSTALLATION GUIDE Please take a few minutes to read through this guide before getting started. 1. Overview A Typical Sliding Wardrobe Door Layout A Frame - Top Liner (optional) B Top Track C Frame - Strike

More information

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1

More information

Hardware Fitting Accessories Accessories

Hardware Fitting Accessories Accessories Door viewer Suitable for door thicknesses (a) 34 52 mm Telescopic version Without flap Angle of vision: 160º Door drilling: 12 mm Suitable for door thicknesses (a) 35 78 mm Telescopic version Without flap

More information

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.

More information

M4 Foot Operated Underpinner Instruction Manual

M4 Foot Operated Underpinner Instruction Manual M4 Foot Operated Underpinner Instruction Manual M4 Walker Rd, Bardon Hill, Coalville, Leicestershire LE67 1TU, England Tel. +44 (0)130 1692, Fax +44 (0)130 16929 e mail sales@framerscorner.co.uk M4 Underpinner

More information

Pocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents.

Pocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents. Pocket Door Kit PD1 / PD2 Installation Instructions Kit Contents. 1, Create Rough Opening In Stud Wall Construct rough opening ensuring all sides are square and level. Rough opening should be; Height =

More information

Flipchart Easels and Rail Systems

Flipchart Easels and Rail Systems Flipchart Easels and Rail Systems 94 Tripod Easels 95 Mobile Easels 96-97 Coloured Ultimate Easels 98 Conference Pro Easel 99 Combi Mobile Easel 100-101 BusyRail 102 Trapease Flipchart Hanger 102 Flipchart

More information

www.hafeleindia.com www.hafeleindia.com Silver Gold Rose Gold Graphite Dark Bronze PROFIN : ONE RANGE. MANY SOLUTIONS. 2. Stack Modular Shelving Pg. 23-32 3. Rail Door Profiles Pg. 33-41 1. Gola Profiles

More information

BAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors

BAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors Protect Serie 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally adjustable up to 120

More information

On-roof system Alpha + Product catalogue

On-roof system Alpha + Product catalogue On-roof system Alpha + Product catalogue Contents ALPHA +... 3 1. ALPHA + BASE RAILS... 4 2. ALPHA + SPLICES... 5 3. ALPHA + TELESCOPING END PIECES... 6 4. ALPHA + INTER-MODULE CLAMPS AND MODULE END CLAMPS...

More information

System 3000 specifications

System 3000 specifications System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be

More information

Connector Technology, Shelf Supports

Connector Technology, Shelf Supports Contents Carcase Connectors MINIFIX Carcase connectors and connecting bolts RONDORFIX Carcase connectors and connecting bolts MAXIFIX Carcase connectors and connecting bolts RAFIX Carcase connectors and

More information

GEZE SLIDING DOOR SYSTEMS

GEZE SLIDING DOOR SYSTEMS GEZE Perlan 140 Multi-faceted uses with individual accessories The discrete design supports every required room effect and makes the sliding door system with its accessories a guarantee for elegant and

More information

Assembly Instructions

Assembly Instructions InTandem Table System November 20 InTandem Table System - Worksurface #4 x/" 4 wood screw power beam Tools Provided T-0 Extended Torx Driver T-25 Torx Driver Additional Tools Required Soft protective

More information

Selection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE

Selection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE PLUS 30 for cable carriers Support trays page 304 PLUS Guide channels page 305 RCC Rail Cable Carrier page 309 ECC Emergency Cable Carrier page 30 Strain relief devices page 3 Assembly profile bars page

More information

MEFA mounting accessories

MEFA mounting accessories MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance

More information

Exclusive. A statement of style. Executive Furniture

Exclusive. A statement of style. Executive Furniture Exclusive Executive Furniture A statement of style Exclusive both in name and in design, this collection combines superb white lacquered oak veneers and transparent frosted or smoked grey glass with impeccably

More information

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing. F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405

More information

POP PLUS / SPIDER SET-UP INSTRUCTIONS

POP PLUS / SPIDER SET-UP INSTRUCTIONS POP PLUS / SPIDER SET-UP INSTRUCTIONS 1 Place system frame on floor with screws indicating top. Expand upwards & outwards and secure frame connectors. Pop-Up display systems are made to be set-up and taken

More information

aluminium profile system

aluminium profile system aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction

More information

PUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG

PUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY ROBUSTA-GAUKEL GMBH &CO.KG MOUNTING TECHNOLOGY PUSH-PULL-PROPS AND ACCESSORIES INDEX General information...................... 3 Push-pull-prop Type

More information

BCI General Specifications Design: BCI Opal Shelving System

BCI General Specifications Design: BCI Opal Shelving System BCI General Specifications Design: BCI Opal Shelving System SH3.0 General Product Design and Construction SH3.0.1 The shelving system is constructed with vertical frames connected by horizontal and diagonal

More information

Footwear Showroom. Glass Shelf. Bracket. Single Slotted Channel (SS 202) Right Angle. Bracket. Glass Shelf. Bracket Single Slotted Channel

Footwear Showroom. Glass Shelf. Bracket. Single Slotted Channel (SS 202) Right Angle. Bracket. Glass Shelf. Bracket Single Slotted Channel I- Range Glass Shelf (SS 202) Right Angle Footwear Showroom Glass Shelf Wooden Shelf Inclined Wooden Shelf Angle I- Range This new Range makes the shelving system still more versatile, expanding the horizon

More information

Installation Manual. Solid Plastic Toilet Partitions. IN CANADA & AREAS OTHER THAN U.S.A.: IN THE U.S.A.:

Installation Manual. Solid Plastic Toilet Partitions.   IN CANADA & AREAS OTHER THAN U.S.A.: IN THE U.S.A.: Installation Manual Solid Plastic Toilet Partitions Toilet Partitions & Lockers IN THE U.S.A.: Hadrian Inc., 7420 Clover Avenue, Mentor, OH 44060 Telephone: 440-942-9118 Fax: 440-942-9618 U.S. toll free

More information

60/30 CLASSIC STEEL SHELVING EUR PRICE LIST

60/30 CLASSIC STEEL SHELVING EUR PRICE LIST 60/ CLASSIC STEEL SHELVING PRICE LIST 0.0.08 60/ CLASSIC STEEL SHELVING The 60/ Classic Steel Shelving system is the essence of many years of experience and success. This flexible product concept has evolved

More information

Leveling Feet, Base Plates and Casters

Leveling Feet, Base Plates and Casters Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.

More information

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC

More information

Enclosures, guards and partitions 6. Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security

Enclosures, guards and partitions 6. Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security Application example system solutions for enclosures and guards Components for building enclosures and guards 1 2 3 4 5 7 194

More information

Downtown Rack. Custom logo option available

Downtown Rack. Custom logo option available Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking

More information

3.0mm Rod Fixings Components

3.0mm Rod Fixings Components 800-753-9688 sales@novadisplay.com www.novadisplay.com 3.0mm Rod Fixings Components 3mm Basic Rod Fixings RB1 RB2 RBT1 1.0M (3' 3-3/8") LONG ROD WITH ADJUSTABLE ANGLE FIXING - Screw Fixing Type for Ceiling

More information

Cable Management Solutions with DLP TM

Cable Management Solutions with DLP TM DLP trunking system P. 374-375 Selection chart for DLP trunking system P. 397 Floor boxes & Under floor boxes Technical data P. 373 DLP U-PVC adaptable trunking system Cable Management Solutions with DLP

More information

Clamping devices 521

Clamping devices 521 Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps

More information

OptiLine 45 Floor boxes

OptiLine 45 Floor boxes OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with

More information

BCI General Specifications Design: BCI Gothia Shelving System

BCI General Specifications Design: BCI Gothia Shelving System BCI General Specifications Design: BCI Gothia Shelving System SH7.0 General Product Design and Construction SH7.0.1 The shelving system is constructed with vertical frames connected by horizontal and diagonal

More information

3. Barrier elements. Barrier posts. Stainles steel

3. Barrier elements. Barrier posts. Stainles steel 3. Urban Equipment Building Equipment Stainles steel e 3.1 Tubular hoops 216-223 3.2 Access barriers 224-227 3.3 Height restriction barriers 228-231 3.4 Protective railing 232-237 3.5 City fence 238-240

More information

WADE 2-1. Universal Carrier. Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains.

WADE 2-1. Universal Carrier. Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains. Universal Carrier Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains. The 400 series carrier accommodates most urinal, water-cooler or hanger plate lavatory

More information

Graz. Flexible modular staircase

Graz. Flexible modular staircase Attic ladders Space saving staircases Modular staircases Spiral staircases Graz Flexible modular staircase Main staircases Metal support Rise Treads Shape Banister Height Packaging Grey (RAL 9007) 18,5-22,5

More information

Program overview Group 8

Program overview Group 8 Program overview Group.1 Fittings for lightweight boards.1.0 -.1.1.2 Connecting fittings i Range summary.2.1.3 Adjustable fitting for head and foot ends / height adjustable leg / shelf supports / cabinet

More information

X-Board Plus is designed for the following built environments: Residential: Commercial Office: Other :

X-Board Plus is designed for the following built environments: Residential: Commercial Office: Other : X-Board Plus sets a new benchmark in environmentally responsible board manufacture. XB+ boards contain up to 85% post-consumer, recycled paper waste, reducing weight and allowing thicker gauge boards to

More information

SPEEDFRAME. The speedy way to be individual. The all purpose construction

SPEEDFRAME. The speedy way to be individual. The all purpose construction SPEEDFRAME The speedy way to be individual The all purpose construction kit SPEEDFRAME All materials are kept close to hand in this specially designed Speedframe work station. Pinning Punch, use with 25mm

More information

Freestanding Shelving System

Freestanding Shelving System Freestanding Shelving System Freestanding Shelving System Ready Made Solutions Freestanding Shelving System Our Free Standing Shelving System originates from Sparring and offers an easy to install and

More information

Owner s Manual #TSGUARD

Owner s Manual #TSGUARD Owner s Manual #TSGUARD PSI Table Saw Dust Collection Guard The ideal solution for table saw dust control. Version 3, 02/04 2004 PSI Woodworking Products 9900 Global Rd., Philadelphia, PA 19115 WARRANTY

More information

Products for fixing to Steelwork and Decking

Products for fixing to Steelwork and Decking Products 8.0 Beam Clamp - Single Support 8.1 Universal Joint for any variable Angle Adjustment 8.2 Beam Clamp TCS for Header Rails 8.3 Beam Clip for Cross Support/ Dimensioning of Bolts 8.4 Beam Clip for

More information

Robert Bosch GmbH. Wall organiser

Robert Bosch GmbH. Wall organiser Wall organiser The organisational talent Wall organiser Say goodbye to messiness! The wall organiser is the ideal place to store everything that tends to lie around. 1 Introduction Wardrobes, drawers and

More information

FlexFrame - Storage Components and Skins

FlexFrame - Storage Components and Skins FlexFrame - Storage Components and Skins 1/4 Square Drive Ball-Point Hex-Bit Socket 1/8 Short Hex, 1-1/2 Overall Length McMaster Part # 54075A44 Table of Contents Topic Page Storage Components 2 General

More information

Solutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs

Solutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs AGRICULTURAL LABORATORY & CLASSROOM FURNITURE Education to Industry for Your Workspace & Storage Needs www.ageducationalsolutions.com 864-256-0621 info@ageducationalsolutions.com Workbenches Potting Benches

More information

Obtained from Omarshauntedtrail.com

Obtained from Omarshauntedtrail.com DaveintheGrave's Halloween Props Animated Crawling Skeleton Build a life-size skeleton torso that realistically crawls across the lawn one arm at a time. 1. Motor Base and Linkage Assembly BASE - I used

More information

Football Goals 7,32x2,44 m

Football Goals 7,32x2,44 m Football Goals 7,32x2,44 m 120x100 mm Professional aluminum football goals 7,32x2,44 m Made of special oval aluminum profile 120x100 mm with double reinforcing ribs. The main frame of the goal powder coated

More information

5. Outdoor equipment. Barrier posts. Stainless steel

5. Outdoor equipment. Barrier posts. Stainless steel 5. Outdoor equipment Urban Equipment Building Equipment 5.1 Bicycle stands / lean-on hoops 252-262 5.2 Laundry drying stands 263 5.4 Litter bins 264-265 5.5 Planters 266 Aufpreis: 40,00 Euro 251 Bicycle

More information

2 Upper shelf: 19 mm chipboard. With pressure locks and spacers.

2 Upper shelf: 19 mm chipboard. With pressure locks and spacers. K2 STORAGE It is simply impossible to imagine the office world without storage, filing and archives. But today, documents and office tools are not just stored efficiently. When choosing storage space,

More information

Art and Picture Hanging Rail Systems SYSTEMS. Display with Elegance

Art and Picture Hanging Rail Systems SYSTEMS. Display with Elegance Art and Picture Hanging Rail Systems SYSTEMS Display with Elegance Table of Contents Classic Rail +..... 1 Click Rail...... 4 Top Rail...... 8 Info Rail...... 10 Deco Rail...... 12 Wires and Hooks...................

More information

Bathroom Installation Guide

Bathroom Installation Guide Bathroom Installation Guide Please read instructions carefully and check products before starting. Products should be fitted/installed by an experienced and competent fitter, failure to do so may invalidate

More information

1. Show the following information with additional information necessary to indicate shop compliance with the requirements of this section.

1. Show the following information with additional information necessary to indicate shop compliance with the requirements of this section. SECTION 12360 LIBRARY SHELVING PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 06100 - Carpentry. 2. 09200 - Metal Studs, Lath, Suspension Ceiling, Plaster and Stucco. 3. 09660 - Resilient Tile Flooring.

More information

FINISTA SLIM ALUMINIUM SYSTEM. Finista Slim Aluminium System. > Multifunctional, Versatile, Simple

FINISTA SLIM ALUMINIUM SYSTEM. Finista Slim Aluminium System. > Multifunctional, Versatile, Simple INIST SLIM LUMINIUM SYSTM inista Slim luminium System > Multifunctional, Versatile, Simple inista Slim luminium System The inista Slim luminium System is a multifunctional shelving program that will allow

More information

Pack It, Travel & Show

Pack It, Travel & Show Pack It, Travel & Show ISOframe Modular Display Series NOTE: all pricing listed is for isoframe hardware only. Graphic panel costs are not included and are priced per booth layout components chosen. ISOframe

More information

Assembly and Installation Guide

Assembly and Installation Guide The Easy Hang Closet Solution SM Install Your elfa In An Instant. Enjoy The Benefits For A Lifetime. Basic Tools For elfa Assembly and Installation Level Hand or Power Drill Drill Bits 1/8", 3/8", 5/16"

More information

i-puc Merchandising & Display System Creative Display Solutions

i-puc Merchandising & Display System Creative Display Solutions i-puc Creative Display Solutions i-puc Discreet in appearance and amazingly versatile in application, this cleverly engineered display program provides a distinctive innovation in puck based merchandising

More information

Grommets & OFFICE Accessories

Grommets & OFFICE Accessories Groets & OFFICE Accessories The technical descriptions and dimensions in this catalogue, also those with the photographs and drawings, are not binding. We reserve the right to make design improvements.

More information

installation instructions WC Frame 1180mm with Dual Flush Cistern

installation instructions WC Frame 1180mm with Dual Flush Cistern installation instructions WC Frame 1180mm with Dual Flush Cistern (C,D,E) K F/G N L M 12 13 14 16 1 2 11 A 5 6 Q O Y 3 C 10 E D B P,Z,AA R T V S 4 U 2 No. Part no. Description Quantity A WC Frame with

More information

HARDWARE and PRODUCT SPECIFICATIONS ANTIMICROBIAL CASEWORK

HARDWARE and PRODUCT SPECIFICATIONS ANTIMICROBIAL CASEWORK HARDWARE and PRODUCT SPECIFICATIONS ANTIMICROBIAL CASEWORK HARDWARE SPECIFICATION KEY 1. DOOR/DRAWER PULLS 2. HINGES 3. DRAWER SLIDES 3A. DRAWER SLIDES 3B. FILE DRAWER SLIDES 4. LOCKS 4A. DRAWER LOCKS

More information