2 Door Wooden Cabinet

Transcription

1 2 Door Wooden Cabinet 832/123 cm 13.cm cm

2

3 Components - Panels Please check you have all the panels listed below 1 Top 2 ottom 3 djustable Shelf Left & Right side x 2 ack Left Door Right Door 2

4 Components - Fittings f you have damaged or missing components, call the Customer elpline: Please check you have all the panels listed below Note:The quantities below are the correct amount to complete the assembly.n some cases more fittings may be supplied than are required. C inge x D 12mm Screw x 20 Door Knob x 2 F 2mm Screw x 2 Plastic Support x Magnetic Catch x 1 Strike Plate x 2 3mm Screw x 10 Screw Cap x 8 J Wall Plug(for solid wall only) x 2 Tools required Phillips screwdriver (medium & large) Small hammer Flatblade screwdriver (medium) Drill Ruler/tape measure mm Suitable drill bit (for use with wall plug) ye protection (when using a hammer or glue) Ruler - Use this ruler to help correctly identify the screws

5 ssembly nstruction Step 1 ssembling bottom, side and back panels NOT:t would be useful to ask Use 3mm screws to fix bottom panel 2 into left side panel and right side panel Carefully slide the back panel into the grooves of side panels 2 nsert screw caps holes into screw Step 2 ssembling top panel NOT:t would be useful to ask a: a: ttach magnetic catch F to the top panel 1 with 12mm screws 1 F F b:ttach top panel 1 to the unit with 3mm screws b: 1 nsert screw caps holes into screw

6 ssembly nstruction Step 3 ssembling door NOT:t would be useful to ask Use 2mm screws D to fix door knobs C onto door panels and J J Use 12mm screws to fix strike plate on the door panels and D Carefully attach left & right door panel to the unit with door hinges by 12mm screws C Use 3mm screw and Wall plugs J to fix the unit on the wall D Step ssembling abjustable shelf panel NOT:t would be useful to ask nsert plastic supports panels into side Carefully slide the abjustable shelf panel 3 on it 3 NOT: Please make sure the unit is secure before use The assembly is now complete NOT:f you have damaged or missing components, call the Customer elpline: ome Retail roup,89-99 vebury oulevard, Central Milton Keynes, MK9 2NW

7 uide to - Wall Mounting & Fixings mportant note: f plastic wall plugs are supplied with your product: mportant: When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure. ints: - these are only suitable for use in masonry walls. f you are in any doubt about the correct wall plugs for your wall, seek professional advice. Failure of the product due to using incorrect fixings is the responsibility of the installer. Types of walls 1: eneral rule: lways use a larger screw and wall plug if you are not sure. 2: nsure you use the recommended drill bit to match the wall plug and hole size. 3: nsure you drill the hole horizontally, do not force the drill or enlarge the hole. : Take extra care when drilling high walls, ceilings and ceramic tiles. nsure wall plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles splitting or cracking. : nsure wall plugs are well fitted and are a tight fit in the drilled hole. You can use one of the following types of wall plug if your walls are made of brick, breeze block, concrete, stone or wood. No.1 eneral Purpose wall plug No.3 Cavity Fixing wall plug No. ammer Fixing wall plug enerally aerated blocks should not be used to support heavy loads, use a specialist fitting in this case. For light loads, general purpose wall plugs can be used. For use with plasterboard partitions or hollow wooden doors. For use with walls stuck with plasterboard. The hammer fixing allows it to be fixed to the wall rather than the plasterboard. lways check the fixing is secure to the retaining wall. No. Cavity Fixing-eavy Duty wall plug No. Shield nchor wall plug eavy loads For use when fitting or supporting heavy loads such as shelving, wall cabinets and coat racks. For use with heavier loads such as TV & ifi speakers and satelite dishes etc. Safety: lways check the fitting and location to ensure your safety in and around the home. Fitting: From time to time check the fitting to ensure the wall plugs or screws do not become loose. No.2 Plasterboard wall plug For use when attaching light loads on to plasterboard partitions. Care & Maintenance Revision 2 - /10/09