ALPHA DIN Wall-Mounted. Distribution Boards
|
|
- Hilary Washington
- 6 years ago
- Views:
Transcription
1 Siemens AG 008 ALPHA DIN Wall-Mounted Distribution Boards / Introduction Distribution Boards with Built-In Distribution Board Panels /4 8GK1 surface and flush-mounting with quick-assembly kits Unequipped Distribution Boards /5 8GK1 surface and flush-mounting Quick-Assembly Kits for Unequipped Distribution Boards /6 8GK4 quick-assembly kits for modular installation devices Assembly Kits for Unequipped Distribution Boards /7 8GK4 longitudinal stays /7 Assembly kits for modular installation devices /8 8GK4 assembly kits for horizontal terminal blocks /9 8GK4 assembly kits with mounting plates /9 8GK4 assembly kits for unequipped panels /10 8GK4 assembly kits for 3NP40 fuse switch disconnectors Accessories /11 Unequipped and partially equipped /1 Quick-assembly kits and assembly kits Siemens ET A1 10/008
2 Siemens AG 008 Introduction ALPHA DIN Wall-Mounted Distribution Boards Partially equipped distribution board Page Surfacemounting distribution boards Flushmounting distribution boards Rated current Cabinet depth Safety class Degree of protection A mm 1 / IP31/IP43 Unequipped / IP31/IP43 System The modular design of our new Siemens distribution board system draws on our long years of experience in the distribution board sector. This system has been tailored to meet individual requirements for distribution board installation. The system comprises unequipped, partially equipped with cabinet-high quick-assembly kits, cabinet-high quick-assembly kits for modular installation devices for fast equipping and wiring, assembly kits for projectrelated and individual assembly as well as an extensive range of accessories. Enclosures Material: Electrogalvanized and powder-coated sheet steel. Sheet thickness: Body 0.75 mm, door 1 mm Color: RAL 9016 (traffic white). Further RAL colors are available on request. Quick-assembly kits and assembly kits The assembly kits are made of sendzimir-galvanized sheet steel and are equipped with molded-plastic covers for a wide range of equipping options, e.g., for switching devices and modular installation devices. The largest switching devices mountable with the ALPHA DIN wall-mounted are the 3NP40 10 and 3NP40 70 fuse switch disconnectors of size LV HRC 000 and LV HRC 00 with a rated current of up to 160 A. Benefits Easy planning thanks to modular design Ample wiring space behind the standard mounting rail Comprehensive range of cabinet-high and frequently used quick-assembly kits and assembly kits for individual and project-related assembly Easy assembly thanks to keyhole-fastened components and modules with quick-acting locks Short mounting times thanks to quick-assembly kits System concept according to DIN, EN and VDE regulations Solid sheet-steel enclosure Degree of protection: - Surface mounting IP43 with door - Flush mounting IP31 with door and integrated masking frame Safety class (total insulation) High-quality surface finish: made of electrogalvanized and powder-coated sheet steel, system components made of sendzimir-galvanized sheet steel, galvanized and transparently chromated small components and screws Doors can be hinged on the right or left Door opening angle of 170 Replaceable locking systems (accessories) Front cover with sealable 90 quick-acting locks Environmentally-compatible and recyclable plastics. Application ALPHA DIN wall-mounted are used for all applications for which a small distribution board does not provide sufficient equipping or wiring space, e.g. in residential, administrative, non-residential, commercial and industrial buildings. Its ultra flat design (depth 140 mm) is an extremely useful addition to the Siemens distribution board product range. The distribution board and its components are of modular design. With just a few standard components, it is possible to achieve a wide range of project-related mounting and equipping options. The ALPHA DIN wall-mounted distribution board range comprises wall-mounted with up to 7 modular installation devices with 1 MW per mounting width (50 mm) each. The standard mounting rail tier spacing is 15 mm or 150 mm. A total of 4 cabinet widths are available, each with an internal dimension of 50 mm. The can be supplied in safety class (total insulation). The standard degree of protection for surface-mounting is IP43 and IP31 for flush-mounting distribution boards. The rated current is 160 A. The modular design of the board enables easy planning, configuration, calculation, ordering and mounting. Cabinet-high quick-assembly kits or assembly kits that only require a one-size screwdriver for assembly are available for all mountable switching devices and modular installation devices. / Siemens ET A1 10/008
3 Siemens AG 008 Introduction Technical specifications Overvoltage category Rated impulse withstand voltage U imp in KV 6 Clearance and creepage distances DIN VDE 0110 Rated insulation voltage U i in V 690 Rated operational voltage U e in V AC/DC 690 Rated voltage U n (40 Hz to 60 Hz AC) in V Rated current in A Up to 160 Protective measures 1) Further RAL colors are available on request. Cabinet dimensions III 690 for built-in devices Safety class (total insulation) Degree of protection acc. to EN 6059 Surface mounting: IP43 with door Flush mounting: IP31 with door and integrated masking frame Standard mounting rail tier spacing per standard mounting rail tier in mm 15/150 Modular width (MW) 18 mm, 1 MW + 1 mountable MW Pollution degree 3 Ambient temperature in C 35 (4-h average value) Relative air humidity in % 50 at 40 C Test specifications EN /3 (VDE 0660 Part 500/504), DIN VDE Enclosures Sheet steel Mounting dimensions DIN Surface Electrogalvanized and powder-coated Color Enclosure 1) RAL 9016 (traffic white) Covers RAL 7035 (light gray) Locking system Rotary handle - this can be replaced by other locking systems on request Packing material Shock-proof, environmentally-compatible Surface-mounting distribution boards (external dimensions) Flush-mounting distribution boards with integrated masking frame (external dimensions) Depth 140 mm Depth 140 mm Height Width Height Width mm mm mm mm Siemens ET A1 10/008 /3
4 Siemens AG 008 Distribution Boards with Built-In Distribution Board Panels 8GK1 surface and flush-mounting with quick-assembly kits Cabinet depth of 140 mm Safety class (total insulation) Tier spacing of 15 mm with N-/PE-bar per panel width RAL 9016 (traffic white) Surface-mounting distribution board: degree of protection IP43 Flush-mounting distribution board with integrated masking frame: degree of protection IP31 Enclosure complete with door. Distribution boards with a width of 750/800 mm or more will be supplied with a double door. The integral rotary handle can also be replaced with a different type of locking system, if preferred. Two -component flanges per panel width at the top and bottom Note: wall anchors are included in delivery with flush-mounting Distribution board (internal/external dimensions) Tiers/ MW DT Surface-mounting Order No. Price DT Flush-mounting Order No. Price Height Width mm mm 450/500 50/300 3/36 A 8GK1 05-1KK C 8GK KK /550 6/7 A 8GK1 05-1KK A 8GK KK /800 9/108 C 8GK1 05-1KK C 8GK KK /650 50/300 4/48 A 8GK1 05-KK A 8GK1 051-KK /550 8/96 A 8GK1 05-KK A 8GK1 051-KK /800 1/144 A 8GK1 05-KK C 8GK1 051-KK / /19 C 8GK1 05-KK C 8GK1 051-KK /800 50/300 5/60 A 8GK1 05-3KK C 8GK KK /550 10/10 A 8GK1 05-3KK A 8GK KK /800 15/180 A 8GK1 05-3KK C 8GK KK /1050 0/40 C 8GK1 05-3KK C 8GK KK /950 50/300 6/7 A 8GK1 05-4KK A 8GK KK /550 1/144 A 8GK1 05-4KK A 8GK KK /800 18/16 A 8GK1 05-4KK A 8GK KK /1050 4/88 C 8GK1 05-4KK C 8GK KK / /300 7/84 A 8GK1 05-5KK C 8GK KK /550 14/168 A 8GK1 05-5KK A 8GK KK /800 1/5 A 8GK1 05-5KK A 8GK KK /1050 8/336 A 8GK1 05-5KK C 8GK KK For accessories, see page /11 ff. /4 Siemens ET A1 10/008
5 Siemens AG 008 Unequipped Distribution Boards 8GK1 surface and flush-mounting Cabinet depth of 140 mm Safety class (total insulation) RAL 9016 (traffic white) Surface-mounting distribution board: degree of protection IP43 Flush-mounting distribution board with integrated masking frame: degree of protection IP31 Enclosure complete with door. Distribution boards with a width of 750/800 mm or more will be supplied with a double door. The integral rotary handle can also be replaced with a different type of locking system, if preferred. Two -component flanges per panel width at the top and bottom Note: wall anchors are included in delivery with flush-mounting Distribution board (internal/external DT Surface-mounting DT Flush-mounting dimensions) Order No. Price Order No. Price Height Width mm mm 450/500 50/300 A 8GK1 03-1KK C 8GK KK /550 A 8GK1 03-1KK C 8GK KK /800 C 8GK1 03-1KK C 8GK KK /650 50/300 A 8GK1 03-KK C 8GK1 031-KK /550 A 8GK1 03-KK C 8GK1 031-KK /800 C 8GK1 03-KK C 8GK1 031-KK /1050 C 8GK1 03-KK C 8GK1 031-KK /800 50/300 A 8GK1 03-3KK A 8GK KK /550 A 8GK1 03-3KK A 8GK KK /800 A 8GK1 03-3KK C 8GK KK /1050 C 8GK1 03-3KK C 8GK KK /950 50/300 A 8GK1 03-4KK C 8GK KK /550 A 8GK1 03-4KK A 8GK KK /800 A 8GK1 03-4KK C 8GK KK /1050 C 8GK1 03-4KK C 8GK KK / /300 A 8GK1 03-5KK C 8GK KK /550 A 8GK1 03-5KK A 8GK KK /800 A 8GK1 03-5KK C 8GK KK /1050 A 8GK1 03-5KK C 8GK KK For quick-assembly kits and assembly kits, see page /6 to /1. For accessories, see page /11 ff. Siemens ET A1 10/008 /5
6 Siemens AG 008 Quick-Assembly Kits for Unequipped Distribution Boards 8GK4 quick-assembly kits for modular installation devices Quick-assembly kits are pre-assembled, cabinet-high system components for the most common applications. Such kits already include the longitudinal stays and can be simply snapped into the unequipped of the respective mounting height thanks to the time-saving quick-locking technology. External dimensions Tiers/ MW Quick-assembly kits for modular installation devices DT Tier spacing of 15 mm, with N-/PE-bar DT Tier spacing of 150 mm, without N/PE bar Height Width Order No. Price Order No. Price mm mm /36 B 8GK KK A 8GK KK GK KK /48 A 8GK KK B 8GK KK GK KK /60 A 8GK KK B 8GK KK GK KK /7 A 8GK KK A 8GK KK GK KK /84 A 8GK KK A 8GK KK GK KK11 The quick-assembly kits with a width of 50 mm are equipped with 7.5 mm standard mounting rails. For accessories, see page /1. /6 Siemens ET A1 10/008
7 Siemens AG 008 Assembly Kits for Unequipped Distribution Boards 8GK4 longitudinal stays Version DT Order No. Price 8GK KK00 Longitudinal stays To mount the assembly kits in unequipped, two longitudinal stays are required for each assembly kit width 1 set = stays Height in mm 450 A 8GK KK00 1 set 1 set A 8GK KK00 1 set 1 set A 8GK KK00 1 set 1 set A 8GK KK00 1 set 1 set A 8GK KK00 1 set 1 set 039 Assembly kits for modular installation devices Assembly kits for individual and project-related assembly, comprising: equipment racks, front cover for unequipped panels including supports, screws and mounting accessories The front cover for unequipped panels is sealable as standard and the quick-acting locking technique facilitates fast and reliable fixation on the supports Note: To mount the assembly kits in unequipped distribution boards, longitudinal stays are required per assembly kit. These must be ordered separately (see page /7). External dimensions Tiers/ MW Assembly kits for modular installation devices DT Tier spacing of 15 mm, without N/PE bar DT Tier spacing of 150 mm, without N/PE bar Height Width Order No. Price Order No. Price mm mm /1 -- A 8GK KK /4 -- B 8GK KK GK KK /4 B 8GK4 301-KK A 8GK4 351-KK /48 B 8GK4 301-KK A 8GK4 351-KK GK KK /36 A 8GK KK A 8GK KK /7 A 8GK KK A 8GK KK GK KK /48 B 8GK KK A 8GK KK /96 B 8GK KK A 8GK KK GK KK1 The assembly kits with a width of 50 mm and 500 mm are equipped with 7.5 mm standard mounting rails. For accessories, see page /1. Siemens ET A1 10/008 /7
8 Siemens AG 008 Assembly Kits for Unequipped Distribution Boards 8GK4 assembly kits for horizontal terminal blocks Assembly kits for individual and project-related assembly, comprising: equipment racks, front cover for unequipped panels including supports, screws and mounting accessories The front cover for unequipped panels is sealable as standard and the quick-acting locking technique facilitates fast and reliable fixation on the supports Note: To mount the assembly kits in unequipped distribution boards, longitudinal stays are required per assembly kit. These must be ordered separately (see page /7). Version DT Order No. Price Assembly kits for horizontal terminal blocks Terminal blocks with graded design, separate With front cover Closed Height in mm (external dimensions) Width in mm (external dimensions) A 8GK KK GK KK A 8GK KK A 8GK4 401-KK A 8GK4 401-KK Note If using assembly kits with a mounting width of 500 mm, we recommend mounting a center stay. For accessories, see page /1 ff. /8 Siemens ET A1 10/008
9 Siemens AG 008 Assembly Kits for Unequipped Distribution Boards 8GK4 assembly kits with mounting plates Assembly kits for individual and project-related assembly, comprising: mounting plate, front cover for unequipped panels including supports, screws and mounting accessories The front cover for unequipped panels is sealable as standard and the quick-acting locking technique facilitates fast and reliable fixation on the supports Note: To mount the assembly kits in unequipped distribution boards, longitudinal stays are required per assembly kit. These must be ordered separately (see page /7). Version DT Order No. Price Assembly kits with mounting plates With front cover Closed Height in mm (external dimensions) Width in mm (external dimensions) A 8GK4 451-KK A 8GK KK A 8GK KK GK4 451-KK11 For accessories, see page /1 ff. 8GK4 assembly kits for unequipped panels Assembly kits for individual and project-related assembly, comprising: front cover for unequipped panels including supports, screws and mounting accessories The front cover for unequipped panels is sealable as standard and the quick-acting locking technique facilitates fast and reliable fixation on the supports Note: To mount the assembly kits in unequipped distribution boards, longitudinal stays are required per assembly kit. These must be ordered separately (see page /7). Version DT Order No. Price Assembly kits for unequipped panels Height in mm (external dimensions) Width in mm (external dimensions) A 8GK KK A 8GK KK A 8GK4 501-KK A 8GK4 501-KK GK KK A 8GK KK A 8GK KK A 8GK KK B 8GK KK For accessories, see page /1 ff. Siemens ET A1 10/008 /9
10 Siemens AG 008 Assembly Kits for Unequipped Distribution Boards 8GK4 assembly kits for 3NP40 fuse switch disconnectors Assembly kits for individual and project-related assembly, comprising: support plate, front cover for unequipped panels including supports, molded-plastic cover, screws and mounting accessories Dimensions of assembly kits (mm): - Height: Width: 50 - Panel-size grid dimensions: (H W) The front cover for unequipped panels is sealable as standard and the quick-acting locking technique facilitates fast and reliable fixation on the supports Note: To mount the assembly kits in unequipped distribution boards, longitudinal stays are required per assembly kit. These must be ordered separately (see page /7). Version DT Order No. Price Assembly kits for fuse switch disconnectors Up to 160 A Fixing plate with matching cover and molded-plastic cover Height in mm: 300 (external dimensions) Width in mm: 50 (external dimensions) For LV HRC fuse links of size NP40 10 (disconnector left) B 8GK4 551-KK NP40 10 B 8GK4 55-KK GK4 551-KK11 For LV HRC fuse links of size NP40 70 (disconnector left) B 8GK4 554-KK NP40 70 B 8GK4 555-KK GK4 554-KK11 For accessories, see page /1 ff. /10 Siemens ET A1 10/008
11 Siemens AG 008 Accessories Unequipped and partially equipped 8GK9 91-0KK10 Version DT Order No. Price Wall-mounting rails For all wall-mounted The distribution board allows fast and accurate mounting by one person Length in mm 50 B 8GK9 91-0KK A 8GK9 91-0KK A 8GK9 91-0KK A 8GK9 91-0KK A 8GK9 91-0KK Cabinet mounting lugs, flat For mounting and fixing a cabinet directly against the wall without spacing - 1 set = 4 lugs incl. screws A 8GK KK36 1 set 5 sets 039 For linking two cabinets and for mounting and fixing directly against the A 8GK KK37 1 set 1 set 039 wall without spacing - 8GK KK36 also required for the ends of a series of cabinets - 1 set = lugs incl. screws Hollow-wall sets For fixing flush-mounting in hollow-walls A 8GK KK8 1 set 1 set 039 8GK KK04 Locking systems Standard locking devices A 8GK KK Made of plastic -Black - With rotary handle for wall-mounted distribution board, degree of protection IP43 - Cannot be retrofitted to other locking devices Rotary handle locking devices for profile cylinders A 8GK KK For wall-mounted with degree of protection IP43/IP55, with mounting option for a profile semicylinder (length 40 mm) - Suitable for E01 or Senat tumbler -Black Lockable rotary handle A 8GK KK Incl. E01 lock and keys Profile semicylinders With E01 lock and two keys A 8GK KK GK KK07 With Senat tumbler and two keys C 8GK KK GK KK08 With 3-mm pin as double-bit lock A 8GK KK GK KK10 8GK KK0 8GD component flanges For fast and correct wiring With 44 possible knockouts Comprising elastic components Siemens nameplates Made of aluminum Self-adhesive Petrol Paint sticks RAL 9016 (traffic white) 1 g Paint spray cans RAL 9016 (traffic white) 400 ml A 8GK KK A 8GD A 8GK KK C 8GK KK Siemens ET A1 10/008 /11
12 Siemens AG 008 Accessories Quick-assembly kits and assembly kits Version DT Order No. Price Partitions For the visual and spatial separation of different potentials Material: plastic Vertical - Height 450 mm A 8GK KK Height 600 mm B 8GK KK Height 750 mm B 8GK KK Height 900 mm A 8GK KK Height 1050 mm A 8GK KK GK KK01 Horizontal - Width 50 mm A 8GK9 00-0KK GK9 00-0KK10 Supports for front cover for unequipped panels Short version Material: plastic 1 set = 4 supports A 8GK KK0 1 set 5 sets 039 8GK KK0 N-/PE bars A 8GK KK For mounting on longitudinal stays, with 9 clamping points, 16 mm 50 mm long 8GK KK10 8GK KK11 8GK KK00 8GK KK7 N/PE bars as plug-in terminal Each with 6 screw terminals from.5 to 16 mm and 1 plug-in terminals A 8GK KK from 1.5 to 4 mm for mounting on longitudinal stays at a 30 inclination With 6 screw terminals from.5 to 16 mm and 1 plug-in terminals from A 8GK KK to 4 mm for PE bar and one N bar each with screw terminals from.5to16mm and 10 plug-in terminals from 1.5 to 4 mm for mounting on longitudinal stays at a 30 inclination Blanking strips Color RAL 7035 (light gray) For 1 MW (1 MW = 18 mm) A 8GK KK Length 1 m, without pressure-relief joint, to cut to length A 8GK KK ALPHA assembly tools A 8GK KK For supports Short and long version With ergonomic handle for supports /1 Siemens ET A1 10/008 7
2/2 Introduction. Unequipped Distribution Boards 2/5 8GK1 surface and flush-mounting distribution boards
Siemens AG 010 ALPHA 160 - DIN Wall-Mounted Distribution Boards / Introduction Distribution Boards with Built-In Distribution Board Panels /4 8GK1 surface and flush-mounting with quickassembly kits Unequipped
More information5/2 Introduction. Unequipped Distribution Boards 5/4 Modular distribution boards 5/5 Add-on parts
ALPHA AS Modular Distribution Boards /2 Introduction Unequipped Distribution Boards /4 Modular distribution boards / Add-on parts Assembly Kits for Unequipped Distribution Boards /6 8GK4 assembly kits
More information4/2 Introduction. Marshaling Boxes 4/8 8GK1 surface-mounting distribution boards
ALPHA 630 - DIN Floor- Mounted Distribution Boards /2 Introduction Unequipped Distribution Boards /5 8GK1 surface-mounting distribution boards, IP3 /6 8GK1 surface-mounting distribution boards, IP55 Marshaling
More informationALPHA Distribution Boards and Terminal Blocks
ALPHA Distribution Boards and Terminal Blocks Catalog ET A1 2010 Answers for infrastructure. Related catalogs Contents ALPHA Distribution Boards and Terminal Blocks Order No.: PDF only: (E86060-K8210-A101-B2-7600)
More information17/2 Order information. 17/3 Approvals and certificates. 17/7 Contacts. 17/8 Online services. 17/9 Service and support. 17/10 Subject index
Appendix /2 Order information /3 Approvals and certificates /7 Contacts /8 Online services /9 Service and support /10 Subject index /14 Order number Index /36 Terms and condons of sale and delivery, Export
More informationEmpty enclosures AKL / AKi ITC - AKL / AKi Enclosures
4 basic enclosures up to 600 x 300 mm, with two different cover heights Box: choice of polystyrene (AKL) or glassfibre-reinforced polycarbonate, grey, similar to RAL 7035 Cover: grey (polystyrene or polycarbonate)
More information10/2 Product overview. 10/3 4AC3 0, 4AC3 1 bell transformers. 10/5 4AC AC3 6 transformers for permanent loads. 10/8 4AC2 4 power supply units
BETA Switching Transformers, Bells and Socket Outlets /2 Product overview /3 4AC3 0, 4AC3 1 bell transformers /5 4AC3 4... 4AC3 transformers for permanent loads /8 4AC2 4 power supply units / 7LQ2 2 bells
More informationTransformers, Power Supply Units and Socket Outlets
Transformers, Power Supply Units and Socket Outlets /2 Introduction /3 4AC3 bell transformers /4 4AC3 safety transformers /5 4AC2 power supply units /6 5TE6 REG socket outlets For further technical product
More informationOptiLine 45 Floor boxes
OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with
More informationDRIVIA cabinets LIMOGES Cedex France 1. DESCRIPTION, USE 3. DIMENSIONS 2. RANGE, CAT. NO. EQUIVALENCE TABLE
87045 LIMOGES Cedex France Tel: (+33) 05 55 06 87 87 Fax: (+33) 05 55 06 88 88 DRIVIA cabinets CONTENTS NTS PAGES 1. Description, use....1 2. Range, equivalence table...1 3. Dimensions...1 4. General characteristics...2
More informationMULTIBLOC 00.ST8 Size A, 690VAC Bottom Fitting, 1-,2-,4-pole
MULTIBLOC 00.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 00.ST8 comprises NH fuse switch disconnectors for 160A. They are designed for bottom
More information3. Barrier elements. Barrier posts. Stainles steel
3. Urban Equipment Building Equipment Stainles steel e 3.1 Tubular hoops 216-223 3.2 Access barriers 224-227 3.3 Height restriction barriers 228-231 3.4 Protective railing 232-237 3.5 City fence 238-240
More informationTechnical features table for miniature circuit-breakers SH 200 Series
Technical features table for miniature circuit-breakers SH 00 Series Standards Poles Tripping characteristics I n A frequency f Hz insulation voltage U i acc. to IEC/EN 60664-1 V Overvoltage category Pollution
More informationControls Contactors and Contactor Assemblies Special Applications
Controls Contactors and Contactor Assemblies Special Applications Price groups 1B, 1H /2 Introduction More information can be found on the Internet: see the opening information, page 13 - Contactors for
More informationPluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header
Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple
More informationSection five. Connection systems. Isobar 4 Evo MCB pan assemblies Mulitclip busbar and Polybloc 126. Comb busbars 127
Connection systems Section five Isobar 4 Evo MCB pan assemblies 122 1 Mulitclip busbar and Polybloc 126 Comb busbars 127 Terminals and installation accessories 128 129 121 Isobar 4 Evo MCB pan assemblies
More informationStandard program overview Steel smoke-proof doors
Smoke-proof doors Standard program overview Steel smoke-proof doors Pos. Product 1 RS-1 Steel door (thin rebated) Smoke-proof door in accordance EN 1634-3 / DIN 18095 Dimensions W 625-1350 H 1750-2500
More informationElectronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet
CDC 0 F0t07 Features Rated control supply voltage -8 V DC, -0 V AC Single-function timer with star-delta change-over One device includes 7 time ranges (0.0 s - 0 min) n/o contacts LEDs for status indication
More information19-in. Mini-Rack Cabinet, Type 1
Spec-00466 19-in. DP FX (763) Mini-Rack 422-2588 422-2661 Cabinet, Components and Accessories Free-Stand Networking Cabinets 19-in. Mini-Rack Cabinet, Type 1 Industry Standards NEMA Type 1 EIA 310-D /
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationElectronic timer CT-SDD.22
CDC 099 F0t0 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied W
More informationType CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
More informationCurrent / residual current and voltage transformers. Current / residual current and voltage transformers
Current / residual current and voltage transformers Current / residual current and voltage transformers 1 Overview Current transformer overview DIN rail current transformer with fuse Current transformer...
More informationContents. Han Hv ES / Han Hv E Technical characteristics Han Hv ES Technical characteristics Han Hv E Han 3 Hv ES
Contents S / Page Technical characteristics S............................. 04.10 Technical characteristics.............................. 04.11 3 S.............................................. 04.12 3...............................................
More information3RF A A 0 2. Switching function. Control voltage Operating voltage with heat sink 10 = 10.5 A. A = Zero-point switching
Main Characteristics: Zero-point switching LED display Various connection technologies Plug-in control terminal Degree of protection IP 2 Insulated mounting foot Standards / Approvals: DIN EN 697--3 UL
More informationStandard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories
Spec-00466 F763.422.2661 763.422.2588 Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories 19-in. Mini-Rack
More informationLINAX 4000L Continuous-line recorder
-48-852-0 4/2.99 1 to 4 line channels Format 144 mm x 144 mm, mounting depth 250 mm Combined recording table for roll chart (2 m) or fanfold chart (16 m) Measuring channels electrically isolated Rugged
More informationFolding sliding doors
Folding sliding doors Standard program overview Folding sliding doors Folding sliding doors single and double-skinned Product Dimensions in mm width/height Leaf thickness Min. headroom Min. lateral projection
More informationDetecting Devices. 8/2 Introduction
Detecting Devices /2 Introduction /4 General data / 3SE5, plastic enclosures /16 3SE2, plastic enclosures /22 3SE5, metal enclosures /30 3SE2, metal enclosures /39 3SE3, metal enclosures Compact design
More informationMotor-protective circuit-breaker, 3p, Ir=40-50A, screw connection. Product range PKZM4 motor protective circuit-breakers up to 65 A
DATASHEET - PKZM4-50 Delivery program Motor-protective circuit-breaker, 3p, Ir=40-50A, screw connection Part no. PKZM4-50 Catalog No. 222355 Eaton Catalog No. XTPR050DC1NL EL-Nummer 0004355161 (Norway)
More informationAtlantic. ip40-ip65 Metal distribution switchboard. Certifications. Technical features. Electrical properties
Atlantic ip40-ip65 Metal distribution switchboard Atlantic series is designed by metal cabinets combinations created for low Voltage electrical switchboards. This line of products show an innovative aesthetic,
More informationDIK 1,5 General data Technical data General
General data Order number 2715966 Type DIK 1,5 Barcode number 4017918061715 Unit pack 50 Pcs. Customs tariff 85369010000 Technical data General Number of levels 3 Number of connections 4 Color gray Insulating
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
DATASHEET - DILA-22(230V50HZ,240V60HZ) Delivery program Contactor relay, 2N/O+2N/C, AC Part no. DILA-22(230V50HZ,240V60HZ) Catalog No. 276399 Eaton Catalog No. XTRE10B22F EL-Nummer 0004130208 (Norway)
More informationRACK 19 AND NETWORKING SOLUTIONS FEATURES
RACK 19 AND NETWORKING SOLUTIONS FEATURES In full respect of the sustainability and compatibility philosophy, the system of suite cabinets E NUX can be integrated with a range of specific accessories for
More informationEuromas Polymas. Colour: Silver grey, similar to RAL 7001; special colours on request
Euromas Polymas Detailed product information can be found on www.bopla.de - 5 sizes - Versions with or without screwing systems - Quick-release fastener versions - Transparent lids on request - Terminals
More informationNo-wear isolation of potentials in terminal block design
TERMOPTO Overview No-wear isolation of potentials in terminal block design Space saving solid-state relay with PUSH IN connection technology The TERMOPTO opto modules are characterised by a particularly
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More informationMoeller Electric Corporation
EMR4-I Current Monitoring Relays 02/0053 EMR4-I1-2-A EMR4-I15-2-A EMR4-I15-2-B Mechanical lifespan operations x10 6 30 30 30 24-h cycle, 55 C, 93 % relative humidty, 96 h Ambient temperature min./max.
More informationIndustrial Controls. Catalog IC SIRIUS. Answers for industry.
Industrial Controls Catalog IC 10 2012 SIRIUS Answers for industry. Contactor Relays Siemens AG 2012 Overview Standards IEC 60947-1, EN 60947-1, IEC 60947--1, EN 60947--1 The 3TH42 and 3TH43 contactor
More informationElectronic timer CT-TGD.22
2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection
More informationFuse Links NV/NH gg with Striker Pin Dimensions
D E I A 9,8 G J H l l Fuse Links Electrical characteristics Rated voltage U n Rated current I n reaking capacity U n Melting characteristic ertified In accordance with Dimensions according to Two versions
More informationDescription Basic devices with positive operation contacts. Connection to SmartWire-DT yes in conjunction with DIL-SWD SmartWire DT contactor module
DATASHEET - DILA-22(24VDC) Delivery program Contactor relay, 2N/O+2N/C, DC current Part no. DILA-22(24VDC) Catalog No. 276414 Eaton Catalog No. XTRE10B22TD EL-Nummer 4130211 (Norway) Product range DILA
More informationTotally Integrated Power SIVACON 8PS LI busbar trunking system siemens.com/li-system
An integrated solution for safe and efficient power supply Totally Integrated Power SIVACON 8PS LI busbar trunking system siemens.com/li-system Contents Totally Integrated Power 2 SIVACON 8PS busbar trunking
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More informationAluminum. Fence Systems
Aluminum M Fence Systems Lifetime Warranty Aluminum Fence Systems Gates & Hardware The Morgan Series Aluminum Fence System is manufactured of the highest quality aluminum and all parts of the system are
More informationHARTING Han-Power T Solutions
HARTING Han-Power T Solutions Fields of Application HARTING industrial connectors are suitable in a wide variety of electronic and electrical applications. Power utilities Robotics Machine tool controls
More informationGeneral data. Technical data DIKD 1,5. General. Dimensions
General data Order number 2715979 Type DIKD 1,5 Barcode number 4017918061722 Unit pack 50 Pcs. Customs tariff 85369010000 Technical data General Number of levels 3 Number of connections 6 Color gray Insulating
More informationProLine P Precise Temperature Measurement at High Voltage Potentials up to 6.6 kv
Precise Temperature Measurement at High Voltage Potentials up to 6.6 kv When temperatures are to be measured using Pt100 resistance thermometers in high-voltage environments, standard temperature transmitters
More informationCablelink Plus Flush Technical
Cablelink Plus Flush Technical 107 technical hotline +44 (0)1268 563720 screeded floor systems is designed to provide power and data distribution highways in screeded floors. The robust system offers a
More informationOutput of three-phase motors at 50 Hz and 400 V
RT0, RH Coupling Relays (Interfaces) Description DC operation IEC 0 947 and EN 0 947 (VDE 00) The RT0 coupling relays for switching motors and RH for auxiliary circuits are laid out to the special requirements
More informationTRIO-PS/1AC/24DC/ 5. Extract from the online catalog. Order No.:
Extract from the online catalog TRIO-PS/1AC/24DC/ 5 Order No.: 2866310 DIN rail power supply unit, primary-switched mode, 1-phase, output: 24 V DC / 5 A Commercial data EAN 4046356046640 Pack 1 pcs. Customs
More informationElectronic timer CT-AWS Impulse-OFF with 1 c/o contact Data sheet
2CDC 251 121 F0004 1 5 2 4 3 6 Characteristics Single-function impulse-off timer One device includes 10 time ranges, from 0.05 s to 300 h, for the adjustment of the pulse time Remote potentiometer connection
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
Contactor relay, 2N/O+2N/C, AC Part no. DILA-22(24V60HZ) Catalog No. 276390 Eaton Catalog No. XTRE10B22B6 Delivery program Product range DILA relays Application Contactor relays Description Basic devices
More informationOperating tools. with partially insulated shaft Type 1, 2 and 3 in set
Accessories 40 Accessories 41 Operating Tools 42 45 Operating Tools WINSTA 46 47 Disconnection Tools 48 Cable Strippers 500 Wire Strippers 501 Cable Cutters 502 Crimping Tools 502 503 Test and Measurement
More informationSwitching relay terminal block; Relay with 1 changeover contact (1u); with miniature switching relay
relay - Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u); with miniature switching relay Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u);
More informationElectronic timer CT-SDS.22
CDC 0 F0t07 Features Rated control supply voltage 8 V DC, 0 V AC Single function timer with star delta change over One device includes 7 time ranges (0.0 s 0 min) n/o contacts LEDs for status indication
More informationALUMINUM. Fence Systems. Made. in the USA
Aluminum Fence Systems Gates and Hardware Made in the USA ALUMINUM M Fence Systems Lifetime Warranty KeyLinkFencing.com Table of Contents Gates and Hardware 3 Morgan Accessories 3 4000 Series 4 & 5 2000
More informationSwitching power supplies CP range, Linear power supplies CP-L range. Content
CP range, Linear power supplies CP-L range Content Switching power supplies, primary switch mode, CP range Benefits and advantages... 136 Approvals... 137 Ordering details... 138 Technical data... 11 Dimensional
More informationControl module CP-A CM
2CDC 271 002 F0t05 Features Pluggable onto redundancy unit CP A RU Threshold values adjustable (14 28 V) One relay output per monitored input / channel Approvals H UL 508, CAN/CSA C22.2 No.14 H UL 60950,
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Series - Low profile PCB relays 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16
More information400 Va.c., 500 Va.c., 690 V a.c. Rated current I n. 120 ka
Low voltage NV/NH knife-blade fuse-links Electrical characteristics Rated voltage U n 00 Va.c., 500 Va.c., 90 V a.c. Rated current I n - 0 A Breaking capacity at 1,1 U n ka Fusing characteristics gg, am,
More informationElectronic timer CT-ERS ON-delayed with 2 c/o contacts Data sheet
1SVR 430 103 F0200 CT-ERS 1 7 2 6 5 4 8 3 1 10 selectable time ranges, from 0.05 s to 300 h 2 Potentiometer with direct reading scale for the fine adjustment of the time delay 3 Sliding switch to set the
More informationResidual Current Operated Circuit-Breakers (RCCBs)
Product overview Residual Current Operated C ircuit-breakers (RCCBs) Number of poles Rated fault current I n ma Rated current I n A MW Auxiliary switches can be mounted (Type A) (Type B) 5SM1and 5SM3 RCCBs
More informationSRS IT cabinets. Installation height numbering as a standard
Among the core products of BKT ELEKTRONIK are metal IT cabinets and casings and related metal accessories. Cabinets are intended for passive and active network equipment with standard dimensions of 10",
More information300 Series Racks. 19" Wide Opening Stand-Alone Wall Cabinet with Adjustable Rails. Applications. Features. In The Box. Options
300 Series Racks 19" Wide Opening Stand-Alone Wall Cabinet with Adjustable Rails Applications The 300 Series is ideal to house electronic equipment for any type of application, both commercial and residential,
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationResidual Current-operated Circuit Breakers (RCCBs) F 360 and F 370 Range
Technical data System pro M Residual Current-operated Circuit Breakers (RCCBs) System pro M 1 When connecting aluminium conductors ensure that the contact surfaces of the conductors are cleaned, brushed
More informationSafety switches with slotted hole lever
Safety switches with slotted hole lever Selection diagram C1 C C C4 C5 Straight slotted hole lever Slotted hole lever at the left Slotted hole lever at the right (without bend) Slotted hole lever at the
More informationElectronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact The CT-TGD.12 is an electronic time relay with the function pulse generator. It is from the CT-D range. With their MDRC profile
More informationTemperature Input Module for Zone 1 Series 9482/32
www.stahl.de > 8 channels for temperature sensors > Intrinsically safe inputs Ex ia > For Pt-, Ni- and Cu-resistance temperature detectors according to DIN, IEC and GOST in 2-, 3- and 4-wire circuits >
More informationSolutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs
AGRICULTURAL LABORATORY & CLASSROOM FURNITURE Education to Industry for Your Workspace & Storage Needs www.ageducationalsolutions.com 864-256-0621 info@ageducationalsolutions.com Workbenches Potting Benches
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationMichigan State University Construction Standards SWITCHBOARDS, PANELBOARDS, AND CONTROL CENTERS PAGE
PAGE 262400-1 SECTION 262400 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationResidual Current Operated Circuit-Breakers (RCCBs)
Product Overview Residual Current Operated Circuit-Breakers (RCCBs) Residual current operated circuit-breakers Number of poles Rated current A Rated residual current ma MW Auxiliary contacts can be mounted
More informationInstructions Contact numbers to EN Coil terminal markings to EN Integrated diode-resistor combination Coil rating 2.
Delivery program Contactor relay, 2N/O+2N/C, DC current Part no. DILER-22-G(24VDC) Catalog No. 010042 Eaton Catalog No. XTRM10A22TD EL-Nummer 4130354 (Norway) Product range DILER Mini-contactors Application
More informationVoltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages For the monitoring of voltages in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationWAGO Application: Plastic Technology Center (SKZ) in Würzburg, Germany
522 WAGO Application: Plastic Technology Center (SKZ) in Würzburg, Germany WAGO Products: WAGO-I/O-SYSTEM with ETHERNET Controllers, DALI and EnOcean Components Wireless Technologie System Overview 524
More informationDATASHEET - ETR4-70-A. Delivery program. Timing relay, 2W, 0.05s-100h, multi-function, VAC/DC, potentiometer connection
DATASHEET - ETR4-70-A Delivery program Timing relay, 2W, 0.05s-100h, multi-function, 24-240VAC/DC, potentiometer connection Part no. ETR4-70-A Catalog No. 031888 Eaton Catalog No. XTTR6A100H70B EL-Nummer
More informationV2UM230V10 Art.Nr.: V2UM230V10P Art.Nr.: Control elements. Tripping delay. Function selector. Status indication 230 V AC/DC
P AC/DC voltage monitoring Multifunction Supply voltage 24 V DC or 230V AC/DC Supply circuit = Measuring circuit 1 change-over contact Width 22,5 mm Control elements Tripping delay Maximum threshold Minimum
More informationElectronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with true OFF-delay and 10 time ranges. All electronic timers from
More informationInstallation Instructions. Materials Needed. Parts Included. Tools You Will Need
Installation Instructions 27 Built In Wall Oven JKP15, JKP18, JKP27, JKP45, JKP56 JKS05, ZEK937, ZEK957 If you have questions, call 800-GE-CARES or visit our website at: www.geappliances.com Before you
More informationTJ TYPE. How to order of terminal blocks TJ XF Basic type Pole Rail TJX A29 FEATURES SPECIFICATIONS (RATINGS, PERFORMANCE)
UNIT TYPE FEATURES Withstand voltage test and sequence check can be easily conducted with testing tools. TJ type has the similar peformance of TX type, and rail and shaft assembly can be selected. Engineering
More informationDATASHEET - ETR4-51-A. Delivery program. Technical data General. Timing relay, star-delta, 50 ms, 1W, 3-60s, VAC/DC
DATASHEET - ETR4-51-A Timing relay, star-delta, 50 ms, 1W, 3-60s, 24-240VAC/DC Part no. ETR4-51-A Catalog No. 031884 Eaton Catalog No. XTTR6A60S51B EL-Nummer 0004133308 (Norway) Delivery program Product
More informationSLIDING DOOR SYSTEM_ S34 PRODUCT LIST. System description Accessories
SLIDING DOOR SYSTEM_ S34 PRODUCT LIST System description Accessories SLIDING DOOR SYSTEM_ S34 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ Profile finishes_ page 08 4.0_ Panels_ page 09
More informationDetecting Devices. 8/2 Introduction
Siemens AG 29 Detecting Devices /2 Introduction 3SE5, 3SE2, 3SE3 Position Switches /4 General data /11 3SE5, plastic and metal enclosures /2 3SE2, plastic enclosures /26 3SE2, metal enclosures /36 3SE3,
More informationgesis MINI 2, 3 and 5 pole
2 gesis MINI 2, 3 and 5 pole Application example General Electronic components become increasingly smaller. Consumer devices become smaller and the electrical connection must therefore become smaller,
More information120/240 Watt AC-DC Front End with PFC W Series Convert Select 120 Convert Select 240
Industrial Environment AC-DC Converters >100 Watt W Series 120/240 Watt AC-DC Front End with PFC W Series Convert Select 120 Convert Select 240 Rugged 35 mm DIN-rail snap-fit design 3000 V AC input to
More informationControls Solid-State Switching Devices
Controls Solid-State Switching Devices /2 Introduction Solid-State Switching Devices /3 General data Solid-State Relays /5 General data /6 3RF21 solid-state relays, 22.5 mm /12 3RF20 solid-state relays,
More informationCEAG Products Main Catalogue Part 2: Chapter Ex-Control units and control stations. EATON 2.4.1
CEAG Products Main Catalogue Part : Chapter... Ex-Control units and control stations www.crouse-hinds.de EATON.. .. EATON www.crouse-hinds.de Ex-Control units and control stations Table of contents. GHG
More informationACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE
acorn WIRE ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES 10 22 13 WIRE MESH PARTITION 10 22 16 FOLDING GATE GUIDE Page 4 / 5 No. 130A All wire type for normal industrial use. 7, 8, 9, 10 and
More informationABB NEW. Three-phase monitoring relays. CM-PVS.31 and CM-PVS.41 Data sheet. Features J. Approvals. Marks. Order data. Order data - Accessories
2CDC 251 042 F0t08 CM-PVS.31 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage Threshold values for over- and undervoltage are adjustable
More informationLiquid level monitors and controls
Liquid level monitors and controls ontent M-ENE, M-ENE MAX... / 8 M-ENS... / 83 M-ENS UP/DOWN... / 84 M-ENN... / 85 M-ENN UP/DOWN... / 86 Accessories for liquid level relays... / 87 Technical data M-ENE,
More informationInstallation Instructions
Installation Instructions 30 Built-In Wall Oven with Microwave JTP86, JT965 If you have questions, call 1.800.GE.CARES or visit our website at: ge.com Before You Begin Read these instructions carefully
More informationCurrent monitoring relays CM-SRS.2 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationPower supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
More informationType: EASY719 AC RC Article No.: Ordering information Relay outputs Quantity 6 Power supply V DC 115/230 V AC. Description
Type: EASY719 AC RC Article No.: 274115 Ordering information Relay outputs Quantity 6 Power supply V DC 115/230 V AC Description 12 digital inputs 6 relay outputs LCD display Operating buttons Screw terminals
More informationHahn AT-G. The simple hinge for light aluminium doors. Quick secure Wide variety of uses
Hahn AT-G The simple hinge for light aluminium doors! Quick secure Wide variety of uses 2 Hahn AT-G The simple hinge for light aluminium doors Constructed of extruded aluminium well-suited to withstand
More informationZUCCHINI MS - LOW TO MEDIUM POWER BUSBAR
ZUCCHINI MS - LOW TO MEDIUM POWER BUSBAR The flexibility of the Zucchini MS range during planning and installation makes it ideal for frequently changing requirements in small to medium sized commercial
More informationTheta 60R. Technical Data Sheet. Special Features. Fig. 2 Theta R, 2 channel version, in housing S17 hole mounting brackets pulled out.
Technical Data Sheet Theta 60R 60 R 60 R Fig. Theta R, channel version, in housing S7 clipped on to a top - hat rail. Fig. Theta R, channel version, in housing S7 hole mounting brackets pulled out. Theta
More information