APPLICATIONS. - Mounted with groove inwards: for covering of profile grooves

Size: px

Start display at page:

Download "APPLICATIONS. - Mounted with groove inwards: for covering of profile grooves"

Wilfred Mills
5 years ago
Views:

22.1072/0 - Available in yellow part no. 22.

1 . 1 - e g d - r e v o e d i l d n g n i l a e S s e l i f o r P 1 PROFILE SYSTEM 1.7 EDGE-, COVER-, SLIDE- AND SEALING PROFILES 7, E, C - S a COVER PROFILE part no /1 -HardPVC,grey - Available in lightgrey part no /2 - Available in black part no /0 - Available in orange part no /0 - Available in blue part no /0 - Available in yellow part no /0 - Weight 0,060 kg/m - Mounted with groove inwards: for covering of profile grooves - Mounted with groove outwards: attachment of panel elements up to 6 mm; thickness compensation for thin panels with silicon or rubber string -Snaporslipintoprofilegroove - Allowance for the panel elements: see page 170 COVER PROFILE 30 part no /1 -HardPVC,grey - Available in lightgrey part no /2 - Weight 0,040 kg/m -Mountedwiththegroovetotheinside:For closing of the profile -Mountedwiththegrooveontheoutside: To accommodate surface elements to 6mm thickness - Press onto profile groove 188 MINITEC PROFILE SYSTEM

2 SIGNAL PROFILE part no /2 - PVC, yellow-orange - Deliverable in red part no /3 - Deliverable in signal-yellow part no /4 - Weight 0,090 kg/m - Marking of safety relevant construction unitssuchasdoorsandriskzones - Coloured organization of constructions or parts -Clipinprofilegroove COVER PROFILE K part no /1 -ABS,grey - Weight 0,023 kg/m - Colour: yellow, part no /4 - Flush, dust-proof covering of profile grooves - Groove cross-section usable as installation conduit for wiring or piping - Information plates -Pressbyhandontoprofilegroove -Cutofwithpliers MINITEC PROFILE SYSTEM 189

grooves - Groove cross-section usable as installation conduit for wiring or piping

1021/0 - Aluminium, natural - Weight 0,030 kg/m - Also deliverable in aluminium anodized part no. 20.

3 COVER PROFILE G part no /0 -NBR,black - Hardness(Shore A) 70 - Weight 0,072 kg/m - Flush, dust-proof covering of profile grooves - Groove cross-section usable as installation conduit for wiring or piping -Pressbyhandontoprofilegroove -Cutofwithpliers 25m COVER PROFILE L part no /0 - Aluminium, natural - Weight 0,030 kg/m - Also deliverable in aluminium anodized part no /1 - Flush, dust-proof covering of profile grooves - Groove cross-section usable as installation conduit for wiring or piping - Information plates -Pressbyhandontoprofilegroove -Cutofwithpliers 190 MINITEC PROFILE SYSTEM

EDGE PROTECTION part no. diverse - PVC, black, strengthened with steel sheet - Edge Protection 0,5-1,5 part no. 22.

panel elements - Protection of MiniTec conduit - Protection of bores and openings -Sliponedgeofthepanelelement (1-3u.

4 EDGE PROTECTION part no. diverse - PVC, black, strengthened with steel sheet - Edge Protection 0,5-1,5 part no /0 Edge Protection 1-3 part no /0 Edge Protection 4-6 part no /0 - Weight(0,5-1,5) 0,050 kg/m - Weight(1-3) 0,120 kg/m - Weight(4-6) 0,190 kg/m - Length(0,5-1,5) 50 m - Edge protection for panel elements - Protection of MiniTec conduit - Protection of bores and openings -Sliponedgeofthepanelelement (1-3u.4-6) 100m INSERT SEAL 30 part no /0 - EPDM-AGV, black - Weight 0,05 kg/m max. 100m - Attachment and sealing of panel elements from2-5mmintheprofilegroove - Insert panel element into profile groove and press insert seal subsequently into free space between panel element and profile groove with blunt tool made of wood or plastic MINITEC PROFILE SYSTEM 191

5 INSERT SEAL 2 part no /0 - EPDM, black - Weight 0,096 kg/m - Length 100 m - Not suitable for acrylic plastic and polycarbonate - Fastening and sealing of panel elements uptomthickness,directlyinthe profile groove - Insert panel into profile groove - Press insert seal subsequently into free space between panel element and profile groovewithblunttoolmadeofwoodor plastic -MaterialsØmcanbeclampedby usinginsertseal6partno /1on both sides INSERT SEAL 4 part no /0 - EPDM-AGV, black - Weight 0,070 kg/m - Length 100 m - Fastening and sealing of panel elements upto2-4mmintheprofilegroove - Also suitable for acrylic plastic and polycarbonate - Insert panel element into profile groove and press insert seal subsequently into free space between panel element and profile groove with blunt tool made of wood or plastic 192 MINITEC PROFILE SYSTEM

6 INSERT SEAL 5 part no /0 - EPDM-AGV, black - Weight 0,040 kg/m - Length 100 m - Fastening and sealing of panel elements upto5mmthickness,directlyinthe profile groove - Also suitable for acrylic plastic and polycarbonate - Insert panel into profile groove INSERT SEAL 6 part no /1 - EPDM-AGV, black - Weight 0,020 kg/m - Length 100 m - Oil-resistant execution, part no /3 - Fastening and sealing of panel elements upto6mmthickness,directlyinthe profile groove - Also suitable for acrylic plastic and polycarbonate - Insert panel into profile groove -MaterialsØmcanbeclampedby usinginsertseal6onbothsides MINITEC PROFILE SYSTEM 193

7 INSERT SEAL 6,5 part no /0 - EPDM-AGV, black - Weight 0,033 kg/m - Length 100 m - Fastening and sealing of panel elements upto6,5mmthickness,directlyinthe profile groove - Also suitable for acrylic plastic and polycarbonate - Insert panel into profile groove, press it subsequently with blunt tool made of wood or plastic -MaterialsØmcanbeclampedby usinginsertseal6,5onbothsides GUIDE PROFILE 2 part no /1 -Hard,PVC,grey - On request also deliverable in black part no /0 - Weight 0,270 kg/m -2-foldslidingdoorsmadeofpanel elementsofmax.6mm - Snap into profile groove - Suitable for subsequent mounting - For subsequent mounting of panel elements PVC-bars part no /0 aretobeinsertedintogroovesofthe lower guide profile -Forthepanelelementallowamin.of 20 mm reduction in y-direction, for direct fitting without PVC-bars allow a min. of 10 mm reduction in y-direction 194 MINITEC PROFILE SYSTEM

of10mmreductioniny-direction PVC-BAR part no. 22.

8 GUIDE PROFILE 3 part no /1 -Hard,PVC,grey - On request also deliverable in black part no /0 - Weight 0,342 kg/m - 3-fold sliding doors, made of panel elementsofmax.6mm - Snap into profile groove - Suitable for subsequent mounting - For subsequent mounting of panel elements PVC-bars part no /0 aretobeinsertedintogroovesofthe lower guide profile -Forthepanelelementallowamin. of 20 mm reduction in y-direction, for direct fitting without PVC-bars allow amin.of10mmreductioniny-direction PVC-BAR part no /0 - PA, natural -Ø6mm - Weight 0,040 kg/m -Guidingofwindowsordoorsinguide profiles -Insertinthelowergroovesofguide profiles2and3 3m MINITEC PROFILE SYSTEM 195

kg/m 50m -Sealingofdoors,lidsandother constructions

9 U-PROFILE part no /0 - Aluminium, anodized E6/EV1 - Weight 0,150 kg/m -Frameforscreensofmax.5mm -Glueonedgesofpanelelementswith suitable adhesive 6m SEALING LEDGE part no /0 -NBR,black - Hardness(Shore A) 70 - Weight 0,175 kg/m 50m -Sealingofdoors,lidsandother constructions against dust, water, noise etc. - Press into profile groove -1:Sealingofoneside: gapwidth=6-8mm -2:Sealingofbothsides: gapwidth=12-16mm 196 MINITEC PROFILE SYSTEM

10 SEALING PROFILE part no /0 -NBR,black - Hardness(Shore A) 70 - Weight 0,122 kg/m -Sealingofdoors,lidsandother constructions against water, dust and noise - Press into profile groove 50m SEALING LIP PROFILE part no /0 -NBR,black - Hardness(Shore A) 60 - Weight 0,245 kg/m -Sealingofdoors,lidsandother constructions against dust, water, noise, light etc. - Press into profile groove 75m MINITEC PROFILE SYSTEM 197

11 COVER PROFILE part no /0 -NBR,black - Hardness(Shore A) 70 - Weight 0,230 kg/m - Edge Protection - Buffer strip - Ladder rungs - Press into profile groove -Thelowersideoftheprofilehas2tear-off notches for adjustment of width to the aluminium profile 50m - Buffer for sliding doors - Cover Profile EPDM part no /1 SLIDE BAR 8 N 30 part no /0 - Hard plastic, black - Weight 0,178 kg/m - Guiding device for sliding doors and other sliding elements - Slide into profile groove -TheslidecanbefixedwithasetscrewM4 198 MINITEC PROFILE SYSTEM

8012/0 - Hard plastic, black - Weight 0,317 kg/m - Sliding support

12 SLIDE BAR 8 N part no /0 - Hard plastic, black - Weight 0,300 kg/m - Guiding device for sliding doors and other sliding elements - Lateral guide for conveyors - Slide into profile groove SLIDE BAR 8-40 A part no /0 - Hard plastic, black - Weight 0,317 kg/m - Sliding support - workpiece slide - Guide for lifting doors - Slide into profile groove -Slides MINITEC PROFILE SYSTEM 199

SLIDE BAR 8 part no. diverse - Hard plastic, black - B=25 part no. 22.

1088/1 - Weight 0,401 kg/m - B=45 part no. 22.

13 SLIDE BAR 8 part no. diverse - Hard plastic, black - B=25 part no /0 - Weight 0,311 kg/m - B=40 part no /1 - Weight 0,401 kg/m - B=45 part no /3 - Weight 0,463 kg/m - Sliding support - workpiece slide - Guide for lifting doors -Slides - Slide into profile groove SLIDE BAR 23 part no /0 - Hard plastic, black - Weight 0,673 kg/m - Sliding support - workpiece slide - Customer processing possible by additional machining allowance - Slide into profile groove 200 MINITEC PROFILE SYSTEM

lateral guide for flat components - slide for containers -

14 SLIDE BAR R part no /0 -PE,white - Weight 0,115 kg/m - Lateral guides -Slideways - Kan-Ban racks - Slide into profile groove - Suitable for all profiles - Protective surface and supporting plates SLIDE BAR F part no /0 -PE,white - highly wear resistant - Weight 0,098 kg - lateral guide for flat components - slide for containers - accumulator roller/ rail - slide into profile groove -secureslidebaratbothendswithset screw or adjustable end caps MINITEC PROFILE SYSTEM 201

Guiding device for sliding doors and other sliding elements - slide

15 ANGULAR SLIDE BAR 30 part no /0 -PE,black - highly wear resistant - Weight 0,248 kg/m - Guiding device for sliding doors and other sliding elements - slide into profile groove -TheslidecanbefixedwithasetscrewM4 ANGULAR SLIDE BAR part no /0 - Hard plastic, black - Weight 0,48 kg/m - Conveying systems - Belt conveyors - Lateral guides - Slide into profile groove 202 MINITEC PROFILE SYSTEM

-Slidethedoubleslideunitintoprofile groove of frame and sliding element -Securetheslidingelementatbothends

1041/0 - Hard plastic, black - Weight 0,387 kg/m - Parallel guide without difference in height

16 DOUBLE SLIDE BAR part no /0 - Hard plastic, black - Weight 0,420 kg/m - Simple workpiece slides - Guide for drawers -Slidethedoubleslideunitintoprofile groove of frame and sliding element -Securetheslidingelementatbothends withhexsocketcapscrewsm8x16 PARALLEL SLIDE BAR part no /0 - Hard plastic, black - Weight 0,387 kg/m - Parallel guide without difference in height -Slidingelementsthatareflushonthe outside - Slide into profile groove -Ifnecessary,theycanbelockedonone sidebymeansofstraightpinsm6x16 Profilex s.a. 6b, Z.I. In den Allern L-9911 Troisvierges Phone LU : Phone BE : Fax : info@profilex-systems.com MINITEC PROFILE SYSTEM 203

EDGE-, COVER-, SLIDEAND SEALING PROFILES

PROFILE SYSTEM EDGE-, COVER-, SLIDE- AND SEALING PROFILES s e l i f o r P gn i l aes dna - ed i l S, - r evoc, - egde EDGE-, COVER-, SLIDEAND SEALING PROFILES These profiles are used for groove covering