Trains and Buses. Antennas and Antenna Line Products MOBILE COMMUNICATION

Size: px

Start display at page:

Download "Trains and Buses. Antennas and Antenna Line Products MOBILE COMMUNICATION"

Edmund Powell
5 years ago
Views:

1 CATA L O G U E Trais ad Buses Ateas ad Atea Lie Products MOBILE COMMUNICATION

Who we are ad what we stad for Kathrei is a leadig iteratioal specialist for reliable, high-quality couicatio techologies. We are a iovatio ad techology leader i today's coected world.

2 Who we are ad what we stad for Kathrei is a leadig iteratioal specialist for reliable, high-quality couicatio techologies. We are a iovatio ad techology leader i today's coected world. Our ability to provide solutios ad systems eables people all over the world to couicate, access iformatio ad use media, whether at home, at the office or o the road. We cover a broad spectrum: from mobile couicatio ad RFID solutios, to satellite receptio, broadbad ad broadcast techology, to trasmissio ad receptio systems i vehicles. As a hidde champio ad family-owed eterprise, we have bee workig o the techologies of tomorrow sice We take pride i our dedicated employees ad our passio for customers ad quality. Our Solutios BUSINESS SOLUTIONS MOBILE COMMUNICATION SAT BROADBAND BROADCAST AUTOMOTIVE Fid out more about us at Catalogue Issue 01/2017 All data published i previous catalogue issues hereby becomes ivalid. We reserve the right to make alteratios i accordace with the requiremets of our customers, therefore for bidig data please check valid data sheets o our homepage: Please check our homepage for ew atea releases which are ot part of this actual prited catalogue. Please also see additioal iformatio o iside back cover. Our quality assurace system ad our evirometal maagemet system apply to the etire compay ad are certified by TÜV accordig to EN ISO 9001 ad EN ISO RoHS Our products are compliat to the EU Directive RoHS as well as to other evirometally relevat regulatios (e.g. REACH).

Suary Ateas for Trais ad Buses 87.5... 6000 MHz Type No. Frequecy Rage Frequecy Bads* Iput Coector (Atea / GPS Atea) Positioig System 727313 87.

8 K7023230 M 11 x 1 female 8 K702323 440 470 MHz M 11 x 1 female 8 70 cm bad K7023231 8 K702021 410 470 MHz 9 725892 410 430 MHz 10 K702121 450 470 MHz 10 741557 380 400 MHz 870 960 MHz 11 87010009

42 ± 1 MHz K702061 450 470 MHz 790 960 MHz 741009 870 960 MHz 70 cm bad / mobile couicatio Page 12 / TNC male GPS 13 14 15 K7021631 876 960 MHz 16 87010007 790 2700 MHz 17 87010023 694 2700 MHz 1575.

42 ± 1 MHz / TNC male GPS 19 87010012 694 6000 MHz 1558 1610 MHz / SMA female GPS, GLONASS, BEIDOU 20 87010022 694 6000 MHz 1558 1610 MHz / GPS, GLONASS, BEIDOU 20 86010142 1575.

Stadards / guidelies for Trai Ateas are listed o page 26 ad 27. For further iformatio, please cotact mobilcom@kathrei.de Multi-bad Combiers May trai ateas provide multiple frequecy bads withi oe atea.

3 Suary Ateas for Trais ad Buses MHz Type No. Frequecy Rage Frequecy Bads* Iput Coector (Atea / GPS Atea) Positioig System MHz FM radio 4 K MHz K UHF female 5 K m bad MHz K UHF female MHz MHz 7 K MHz M 11 x 1 female 8 K M 11 x 1 female 8 K MHz M 11 x 1 female 8 70 cm bad K K MHz MHz 10 K MHz MHz MHz MHz MHz MHz MHz ± 1 MHz K MHz MHz MHz 70 cm bad / mobile couicatio Page 12 / TNC male GPS K MHz MHz MHz ± 1 MHz / TNC male GPS MHz mobile couicatio ± 1 MHz / TNC male GPS MHz MHz / SMA female GPS, GLONASS, BEIDOU MHz MHz / GPS, GLONASS, BEIDOU MHz GPS TNC female 21 New product * All systems lyig i the specified frequecy bads ca be operated, e.g. GSM-R, GSM, UMTS, LTE, Istallatio Guidelies ca be foud from page 22 owards. Stadards / guidelies for Trai Ateas are listed o page 26 ad 27. For further iformatio, please cotact mobilcom@kathrei.de Multi-bad Combiers May trai ateas provide multiple frequecy bads withi oe atea. All these frequecy bads are fed ito the atea via oe coo atea iput. I order to combie the differet frequecy bads oto the coo atea iput, multi-bad combiers ca be used. Depedig o the umber of combied frequecy bads, e.g. dual-, triple- or quad-bad combiers ca be selected. Kathrei offers a variety of differet frequecy combiatios for multi-bad combiers. A accordig up-to-date product overview ca be foud i the curret catalogue for mobile couicatio products or o our homepage. Examples of multi-bad combiers: Dual-bad combier Triple-bad combier Quad-bad combier 3

4 Trai Atea MHz FM-broadcast receivig atea for rail vehicles i fiberglass radome. Oly for receivig. Type No Iput Frequecy rage MHz Impedace Ω 50 Ω Polarizatio Radome weight g lb Total weight g lb Packig size (outside) iches 151 x 90 x x 3.5 x 16.3 Moutig: Groudig ad high voltage protectio: Flage: Alumium. Radiator: Copper. Radome: Fiberglass; Colour: Light grey. All screws ad uts: Stailess steel. Sealig: Neopree ad EPDM. Note: Do t use detergets that might harm the sealig. O a coductive surface with a miimum size of 100 x 200 cm 39.4 x 78.7 iches by meas of existig M10 studs. This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies. Moutig flage: Dichtugsrig Sealig O-rig icht lackiert ot paited All dimesios i iches icht lackiert ot paited Moutig hole for the coector: 33 (max. 35) diameter. Note: Keep moutig surface clear of pait for electrical cotact. 4

Tram ad Bus Atea 146 174 MHz K50222.. Broadbad atea i fiberglass radome. Type No. K5022211 601620 K5022212 600055 Iput UHF female Frequecy rage MHz 143 162 but preferred rage: 146 156 VSWR < 1.

6 Packig size iches 260 x 260 x 130 10.2 x 10.2 x 5.1 Type No. K5022221 600825 K5022222 600057 Iput UHF female Frequecy rage MHz 152 178 but preferred rage : 156 174 VSWR < 1.4 Gai db 0 db (ref.

5 Tram ad Bus Atea MHz K Broadbad atea i fiberglass radome. Type No. K K Iput UHF female Frequecy rage MHz but preferred rage: VSWR < 1.4 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 100 (at 50 C ambiet temperature) Radome weight g lb Total weight g lb Packig size iches 260 x 260 x x 10.2 x 5.1 Type No. K K Iput UHF female Frequecy rage MHz but preferred rage : VSWR < 1.4 Gai db 0 db (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 100 (at 50 C ambiet temperature) Radome weight g lb Total weight g lb Packig size iches 260 x 260 x x 10.2 x 5.1 Radiator ad Base: Alumium. Radome: Fiberglass, colour: Grey. Studs ad all screws ad uts: Stailess steel. Sealig: Neopree ad polyurethae. Note: Do t use detergets that might harm the sealig. Moutig: O a coductive surface 1.0 x 2.0 m 39.4 x 78.7 iches mi. with 3 studs M10 ad couterflage. Note: No superstructures i this area. Groudig ad high voltage protectio: Scope of supply: DC grouded to protect agaist lightig ad high-tesio lies. Atea with 3 studs, each with 2 uts, 1 rubber gasket ad 1 couterflage. Drivig directio 5

6 Trai Atea MHz Alumium atea i fiberglass radome. Type No Iput Frequecy rage MHz VSWR < 2.0 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 100 (at 50 C ambiet temperature) Radome weight g lb Totel weight g lb Packig size (outside) iches 151 x 90 x x 3.5 x 16.3 Radiator ad flage: Alumium. Radome: Fiberglass, colour: Light grey. All screws ad uts: Stailess steel. Sealig: Neopree ad EPDM. Note: Do t use detergets that might harm the sealig. Moutig: O a coductive surface 200 x 100 cm 78.7 x 39.4 iches mi. with 4 studs M10. Groudig ad high voltage protectio: This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies. Moutig flage: Dichtugsrig Sealig O-rig icht lackiert ot paited icht lackiert ot paited All dimesios i iches Moutig hole for the coector: 33 (max. 35) diameter. Note: Keep moutig surface clear of pait for electrical cotact. 6

7 Trai Atea MHz Low profile atea i fiberglass radome. The atea fulfils the requiremets accordig to EN Type No Atea Iput Frequecy rage MHz VSWR < 1.7 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 100 (at 50 C ambiet temperature) Ier coductor DC grouded Radome weight g lb Total weight g lb Approx Packig size, L x W x H Height iches iches 150 x 90 x x 3.5 x Radiator: Copper ad brass. Flage: Alumium. Radome: Fiberglass. All screws ad uts: Stailess steel. Colour: Grey. Sealig: Neopree ad silico. Note: Do t use detergets that might harm the sealig. Moutig flage: cotact area Moutig: O a coductive surface with a miimum size of 1000 x x 39.4 iches usig 4 M10 bolts. seal Groudig ad high voltage protectio: This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies Iput Atea 400 MHz 11 diameter cotact area Moutig hole for the coector: 33 (max. 35) 1.3 (max. 1.4) iches diameter. Note: Keep moutig surface clear of pait for electrical cotact. Eveess of opposite surface iches. Use a cap ut or hex-head screw plus the eclosed sealig washer. Hex-head screw M10 torque 15 Nm 20 Nm Added sealig washer Cap ut M10 DIN 1587 torque 15 Nm 20 Nm Situatio of moutig All dimesios i iches 7

Tram ad Bus Atea 406... 470 MHz K702321., K702323. Frequecy rage 406 428 MHz Type No. K7023210 602284 Iput Drill hole dimesio iches M 11 x 1 female (the coector for cable RG 58 C/U is supplied). 12 0.

8 Tram ad Bus Atea MHz K , K Frequecy rage MHz Type No. K Iput Drill hole dimesio iches M 11 x 1 female (the coector for cable RG 58 C/U is supplied) Frequecy rage MHz MHz VSWR MHz: < MHz: < MHz: < 1.9 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 50 W (at 50 C ambiet temperature) Weight g lb lb Packig size (outside) Height Moutig iches iches 117 x 117 x x 4.6 x O a coductive surface 70 x 70 cm 27.6 x 27.6 iches mi. Frequecy rage MHz Type No. K K K Iput Drill hole dimesio Frequecy rage iches M 11 x 1 female M 11 x 1 female (the coector for (the coector for cable cable RG 58 C/U RG 213/U is supplied). is supplied) MHz VSWR MHz: < MHz: < MHz: < 1.7 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Ω Polarizatio Max. power W 50 W (at 50 C ambiet temperature) Weight g lb Packig size (outside) Height Moutig iches iches x 117 x x 4.6 x O a coductive surface 50 x 50 cm 19.7 x 19.7 iches mi. Moutig: Special features: Radiator ad base: Alumium. Radome: High impact plastic. All screws ad uts: Stailess steel. The drillig diameter is 12 except the N coector versios: 17. A special zic washer esures a good cotact at the edges of the hole. All metall parts of this atea are DC grouded. Extreme robust ad car-wash proof vehicular atea. 8

9 Trai Atea MHz K Low profile broadbad atea i fiberglass radome. Type No. K Iput Frequecy rage MHz VSWR < 1.5 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 170 (at 50 C ambiet temperature) Radome weight g lb Total weight g lb Packig size (outside) iches 151 x 87 x x 3.4 x 8.3 Moutig: Groudig ad high voltage protectio: Radiator ad Flage: Alumium. Radome: Fiberglass, colour: Light grey. All screws ad uts: Stailess steel. Sealig: Neopree ad rubber. Note: Do t use detergets that might harm the sealig. O a coductive surface with a miimum size of 50 x 50 cm 19.7 x 19.7 iches by meas of existig M10 studs. This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies. Moutig flage: Dichtugsrig Sealig O-rig icht lackiert ot paited icht lackiert ot paited All dimesios i iches Moutig hole for the coector: 33 (max. 35) diameter. Note: Keep moutig surface clear of pait for electrical cotact. 9

10 Trai Atea / MHz , K db gai broadbad atea i fiberglas radome. Type No K Iput Frequecy rage MHz VSWR < 1.5 Gai db 2 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 640 (at 50 C ambiet temperature) Radome weight g lb lb Weight g lb Packig size (outside) iches 151 x 90 x x 3.5 x 163 Moutig: Groudig ad high voltage protectio: Radiator ad Flage: Alumium. Radome: Fiberglass, color: Light grey. All screws ad uts: Stailess steel. Sealig: Neopree ad EPDM. Note: Do t use detergets that might harm the sealig. O a coductive surface with a miimum size of 50 x 50 cm 19.7 x 19.7 iches by meas of existig M10 studs. This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies. Moutig flage: Dichtugsrig Sealig O-rig icht lackiert ot paited icht lackiert ot paited All dimesios i iches Moutig hole for the coector: 33 (max. 35) diameter. Note: Keep moutig surface clear of pait for electrical cotact. 10

11 Trai Atea MHz ad MHz Two-bad atea i fiberglass radome workig i the MHz ad MHz rage. The atea ca be operated i both frequecy rages simultaeously by usig the combier Type No Iput Frequecy rage MHz ad VSWR < 1.5 Gai db 0 db (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 500 W (at 50 C ambiet temperature) Radome weight g lb Total weight g lb Packig size (outside) iches 151 x 87 x x 3.4 x 8.3 Moutig flage: Radiator: Brass. Flage: Alumium. Radome: Fiberglass; Colour: Light grey. All screws ad uts: Stailess steel. Sealig: Neopree ad rubber. Note: Do t use detergets that might harm the sealig icht lackiert ot paited Moutig: O a coductive surface with a miimum size of 50 x 50 cm 19.7 x 19.7 iches by meas of existig M10 studs Groudig ad high voltage protectio: Accessories: Combier (order separately) This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies Dichtugsrig Sealig O-rig Type No Pass bad Bad 1 Bad 2 Isertio loss Port 1 Port 3 Port 2 Port 3 MHz MHz db db < 0.5 ( MHz) < 0.5 ( MHz) Isolatio Port 1 Port 2 db > 45 VSWR < 1.2 Impedace Ω 50 Iput power Bad 1 Bad 2 Itermodulatio products W W < 50 < 50 dbc < 160 (2d/3rd order; with 2 x 20 W) Temperature rage C Coectors Applicatio Idoor DC trasparecy Port 1 Port 3 Port 2 Port 3 Port 3 Port 2 By-pass (max. 2500mA) short circuited stop Weight g lb Packig size 285 x 55 x 125 iches 11.2 x 2.2 x 4.9 Dimesios (w x h x d) iches x 32 x (without coectors) 9.0 x 1.3 x 4.4 (without coectors) Port 2 All dimesios i iches Moutig hole for the coector: 33 (max. 35) diameter. Note: Keep moutig surface clear of pait for electrical cotact. Port icht lackiert ot paited Port 3 11

12 Trai Atea MHz ad MHz Two-bad Atea: MHz / MHz Low profile atea i fiberglass radome. The atea fulfils the requiremets accordig to EN Type No Atea two-bad Iput Frequecy rage MHz VSWR < 1.5 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 100 (at 50 C ambiet temperature) Ier coductor DC grouded Radome weight g lb Total weight g lb Approx Packig size, L x W x H iches 150 x 90 x x 3.5 x 7.5 Height iches Moutig flage: Radiator: Copper ad brass. Flage: Alumium. Radome: Fiberglass. All screws ad uts: Stailess steel. Colour: Grey. Sealig: Neopree ad silico. Note: Do t use detergets that might harm the sealig cotact area seal Moutig: Groudig ad high voltage protectio: O a coductive surface with a miimum size of 1000 x x 39.4 iches usig 4 M10 bolts. This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies ) 1) Iput Atea 450 MHz / 900 MHz diameter cotact area Moutig hole for the coector: 33 (max. 35) 1.3 (max. 1.4) iches diameter. Note: Keep moutig surface clear of pait for electrical cotact. Eveess of opposite surface iches. Use a cap ut or hex-head screw plus the eclosed sealig washer. Hex-head screw M10 torque 15 Nm 20 Nm Added sealig washer Cap ut M10 DIN 1587 torque 15 Nm 20 Nm Situatio of moutig All dimesios i iches 12

Trai Atea 430 470 MHz / 870 960 MHz ad GPS 1575 MHz 87010006 Multi-bad atea: 430 470 MHz / 870 960 MHz ad GPS. The atea ca be operated i all frequecy rages simultaeously.

13 Trai Atea MHz / MHz ad GPS 1575 MHz Multi-bad atea: MHz / MHz ad GPS. The atea ca be operated i all frequecy rages simultaeously. Low profile atea i fiberglass radome. The atea fulfils the requiremets accordig to EN Type No Atea multi-bad Iput Frequecy rage MHz VSWR < 1.5 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 100 (at 50 C ambiet temperature) Ier coductor DC grouded Atea GPS Iput Cable RG 316/U of 225 legth with TNC male coector Frequecy rage MHz ±1 VSWR < 1.5 Polarizatio Right had circular Gai (90 elevatio) db 2 (ref. to the circularly polarized isotropic atea) Impedace Ω 50 Ier coductor DC grouded Radome weight g lb Weight g lb Approx Packig size Height iches iches 150 x 90 x x 3.5 x Radiator: Copper ad brass. Flage: Alumium. Radome: Fiberglass. All screws ad uts: Stailess steel. Colour: Grey. Sealig: Neopree ad silico. Note: Do t use detergets that might harm the sealig. Moutig flage: ) ) cotact area seal Iput Atea GPS Iput Atea 450 MHz / 900 MHz diameter Moutig: Groudig ad high voltage protectio: Accessories: Warig: O a coductive surface with a miimum size of 1000 x x 39.4 iches usig 4 M10 bolts. This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies. Low oise amplifier GPS (please order separately). If the atea is operated without the preamplifier type o , please ote the followig poits. Due to the fact that the ier coductor of the atea GPS is DC grouded, the iput of the GPS receiver is loaded with a DC short circuit. If the GPS receiver provides a remote DC power supply, this could damage the GPS receiver. At the iput of the atea GPS a level of 25 db below the sigal applied at the iput of the atea two-bad appears. Depedig o the level of the sigal applied at the iput of the atea two-bad, the GPS receiver may be overloaded or damaged Situatio of moutig cotact area Moutig hole for the coector: 33 (max. 35) 1.3 (max. 1.4) iches diameter. Note: Keep moutig surface clear of pait for electrical cotact. Eveess of opposite surface iches. Use a cap ut or hex-head screw plus the eclosed sealig washer. Hex-head screw M10 torque 15 Nm 20 Nm Added sealig washer All dimesios i iches Cap ut M10 DIN 1587 torque 15 Nm 20 Nm

Trai Atea 450 470 MHz ad 790 960 MHz K702061 Two-bad atea i fiberglass radome workig i the 450 470 MHz ad 790 960 MHz rage.

14 Trai Atea MHz ad MHz K Two-bad atea i fiberglass radome workig i the MHz ad MHz rage. The atea ca be operated i both frequecy rages simultaeously by usig the combier Type No. K Iput Frequecy rage MHz ad VSWR < 1.5 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 500 (at 50 C ambiet temperature) Radome weight g lb Total weight g lm Packig size (outside) iches 151 x 87 x x 3.4 x 8.3 Radiator: Brass. Flage: Alumium. Radome: Fiberglass; Colour: Light grey. All screws ad uts: Stailess steel. Sealig: Neopree. Note: Do t use detergets that might harm the sealig. Moutig flage: icht lackiert ot paited Moutig: O a coductive surface with a miimum size of 50 x 50 cm 19.7 x 19.7 iches by meas of 4 existig M10 studs Groudig ad high voltage protectio: Accessories: Combier (order separately) This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies Dichtugsrig Sealig O-rig Type No Pass bad Bad 1 Bad 2 Isertio loss Port 1 Port 3 Port 2 Port 3 MHz MHz db db < 0.5 ( MHz) < 0.5 ( MHz) Isolatio Port 1 Port 2 db > 45 VSWR < 1.2 Impedace Ω 50 Iput power Bad 1 Bad 2 Itermodulatio products W W < 50 < 50 dbc < 160 (2d/3rd order; with 2 x 20 W) Temperature rage C Coectors Applicatio Idoor DC trasparecy Port 1 Port 3 Port 2 Port 3 Port 3 Port 2 By-pass (max. 2500mA) short circuited stop Weight g lb Packig size 285 x 55 x 125 iches 11.2 x 2.2 x 4.9 Dimesios (w x h x d) iches x 32 x (without coectors) 9.0 x 1.3 x 4.4 (without coectors) Port 2 All dimesios i iches Moutig hole for the coector: 33 (max. 35) diameter. Note: Keep moutig surface clear of pait for electrical cotact. Port icht lackiert ot paited Port 3 14

15 Trai Atea MHz Broadbad atea of very low profile i fiberglass radome. Special radome suitable for high-speed trais. The atea fulfils the requiremets accordig to EN Type No Iput Frequecy rage MHz MHz VSWR < 1.5 Gai db 0 db (ref. to quarter-wave atea) Impedace Ω 50 Ω Polarizatio Max. power W 100 W (at 50 C ambiet temperature) Radome weight g lb Total weight g lb Packig size (outside) iches 137 x 92 x x 3.6 x Moutig: Groudig ad high voltage protectio: Radiator: Brass. Flage: Alumium. Radome: Fiberglass; Colour: Light grey. All screws ad uts: Stailess steel. Sealig: Neopree ad itrile rubber. Note: Do t use detergets that might harm the sealig O a coductive surface of a miimum size of 50 x 50 cm 19.7 x 19.7 iches by meas of 4 existig M10 studs. This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies. Moutig flage: ot paited sealig O-rig ot paited Moutig hole for the coector: 33 (max. 35) diameter. Note: Keep moutig surface clear of pait for electrical cotact. All dimesios i iches. 15

Trai Atea 876 960 MHz K7021631 Broadbad gai atea i fiberglass radome. Type No. K7021631 602382 Iput Frequecy rage MHz 876 960 VSWR < 1.5 Gai db 3.5 (ref.

16 Trai Atea MHz K Broadbad gai atea i fiberglass radome. Type No. K Iput Frequecy rage MHz VSWR < 1.5 Gai db 3.5 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 500 (at 50 C ambiet temperature) Radome weight g lb 365 g Total weight g lb 1000 g Packig size (outside) iches 151 x 90 x x 3.5 x 16.3 Moutig: Groudig ad high voltage protectio: Radiator: Brass. Flage: Alumium. Radome: Fiberglass, colour: Light grey. All screws ad uts: Stailess steel. Sealig: Neopree ad EPDM. Note: Do t use detergets that might harm the sealig. O a coductive surface with a miimum size of 50 x 50 cm 19.7 x 19.7 iches by meas of 4 existig M10 studs. This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies. Moutig flage: Dichtugsrig Sealig O-rig icht lackiert ot paited icht lackiert ot paited All dimesios i iches Moutig hole for the coector: 33 (max. 35) diameter. Note: Keep moutig surface clear of pait for electrical cotact. 16

17 Trai Atea MHz Multi-bad atea: 800/900/1800/1900/UMTS/LTE/W-LAN. The atea ca be operated i all frequecy rages simultaeously. Low profile atea i fiberglass radome. The atea fulfils the requiremets accordig to EN Type No Atea multi-bad Iput Frequecy rage MHz MHz VSWR MHz: < MHz: < MHz: < MHz: < 2.0 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 100 (at 50 C ambiet temperature) Ier coductor DC grouded Radome weight g lb Total weight g lb Approx Packig size, L x W x H Height iches iches 152 x 91 x x 3.6 x Radiator: Copper ad brass. Flage: Alumium. Radome: Fiberglass. All screws ad uts: Stailess steel. Colour: Grey. Sealig: Neopree ad silico. Note: Do t use detergets that might harm the sealig. Moutig flage: cotact area seal Moutig: Groudig ad high voltage protectio: O a coductive surface with a miimum size of 50 x 50 cm 19.7 x 19.7 iches usig 4 M10 bolts. This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies ) 1) Iput Atea MHz diameter cotact area Moutig hole for the coector: 33 (max. 35) 1.3 (max. 1.4) iches diameter. Note: Keep moutig surface clear of pait for electrical cotact. Eveess of opposite surface iches. Use a cap ut or hex-head screw plus the eclosed sealig washer. Hex-head screw M10 torque 15 Nm 20 Nm Added sealig washer Cap ut M10 DIN 1587 torque 15 Nm 20 Nm Situatio of moutig All dimesios i iches 17

18 Trai Atea MHz ad GPS 1575 MHz Multi-bad atea: 700/800/900/1800/1900/UMTS/2600/ LTE/W-LAN ad GPS. The atea ca be operated i all frequecy rages simultaeously. Low profile atea i fiberglass radome. The atea fulfils the requiremets accordig to EN Type No Atea multi-bad Iput Frequecy rage MHz VSWR MHz: < MHz: < MHz: < MHz: < 2.0 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 100 (at 50 C ambiet temperature) Ier coductor DC grouded Atea GPS Iput Cable RG 316/U of 225 legth with TNC male coector Frequecy rage MHz ±1 VSWR < 1.5 Polarizatio Right had circular Gai (90 elevatio) db 2 (ref. to the circularly polarized isotropic atea) Impedace Ω 50 Ier coductor DC grouded Radome weight g lb Total weight g lb Packig size Height iches iches 152 x 91 x x 3.6 x Moutig flage: ) ) cotact area seal Iput Atea GPS Iput Atea MHz Radiator: Copper ad brass. Flage: Alumium. Radome: Fiberglass. All screws ad uts: Stailess steel. Colour: Grey. Sealig: Neopree ad silico. Note: Do t use detergets that might harm the sealig diameter Moutig: Groudig ad high voltage protectio: Accessories: Warig: O a coductive surface with a miimum size of 50 x 50 cm 19.7 x 19.7 iches usig 4 M10 bolts. This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies. Low oise amplifier GPS (please order separately). If the atea is operated without the preamplifier type o , please ote the followig poits. Due to the fact that the ier coductor of the atea GPS is DC grouded, the iput of the GPS receiver is loaded with a DC short circuit. If the GPS receiver provides a remote DC power supply, this could damage the GPS receiver. At the iput of the atea GPS a level of 25 db below the sigal applied at the iput of the atea multi-bad appears. Depedig o the level of the sigal applied at the iput of the atea multi-bad, the GPS receiver may be overloaded or damaged cotact area Moutig hole for the coector: 33 (max. 35) 1.3 (max. 1.4) iches diameter. Note: Keep moutig surface clear of pait for electrical cotact. Eveess of opposite surface iches. Use a cap ut or hex-head screw plus the eclosed sealig washer. Hex-head screw M10 torque 15 Nm 20 Nm Added sealig washer Cap ut M10 DIN 1587 torque 15 Nm 20 Nm Situatio of moutig All dimesios i iches 18

Trai Atea 790 2700 MHz ad GPS 1575 MHz 87010003 Multi-bad atea: 800/900/1800/1900/UMTS/ LTE/W-LAN ad GPS. The atea ca be operated i all frequecy rages simultaeously.

19 Trai Atea MHz ad GPS 1575 MHz Multi-bad atea: 800/900/1800/1900/UMTS/ LTE/W-LAN ad GPS. The atea ca be operated i all frequecy rages simultaeously. Low profile atea i fiberglass radome. The atea fulfils the requiremets accordig to EN Type No Atea multi-bad Iput Frequecy rage MHz VSWR MHz: < MHz: < MHz: < MHz: < 2.0 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 100 (at 50 C ambiet temperature) Ier coductor DC grouded Atea GPS Iput Cable RG 316/U of 225 legth with TNC male coector Frequecy rage MHz ±1 VSWR < 1.5 Polarizatio Right had circular Gai (90 elevatio) db 2 (ref. to the circularly polarized isotropic atea) Impedace Ω 50 Ier coductor DC grouded Radome weight g lb Total weight g lb Approx Packig size Height iches iches 152 x 91 x x 3.6 x Moutig flage: ) ) cotact area seal Iput Atea GPS Iput Atea MHz Radiator: Copper ad brass. Flage: Alumium. Radome: Fiberglass. All screws ad uts: Stailess steel. Colour: Grey. Sealig: Neopree ad silico. Note: Do t use detergets that might harm the sealig diameter Moutig: O a coductive surface with a miimum size of 50 x 50 cm usig 4 M10 bolts cotact area Groudig ad high voltage protectio: Accessories: Warig: This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies. Low oise amplifier GPS (please order separately). If the atea is operated without the preamplifier type o , please ote the followig poits. Due to the fact that the ier coductor of the atea GPS is DC grouded, the iput of the GPS receiver is loaded with a DC short circuit. If the GPS receiver provides a remote DC power supply, this could damage the GPS receiver. At the iput of the atea GPS a level of 25 db below the sigal applied at the iput of the atea multi-bad appears. Depedig o the level of the sigal applied at the iput of the atea multi-bad, the GPS receiver may be overloaded or damaged. Moutig hole for the coector: 33 (max. 35) 1.3 (max. 1.4) iches diameter. Note: Keep moutig surface clear of pait for electrical cotact. Eveess of opposite surface iches. Use a cap ut or hex-head screw plus the eclosed sealig washer. Hex-head screw M10 torque 15 Nm 20 Nm Added sealig washer Cap ut M10 DIN 1587 torque 15 Nm 20 Nm Situatio of moutig All dimesios i iches 19

Trai Atea 694 6000 MHz ad GPS, GLONASS, BEIDOU 87010012, 87010022 Prelimiary Issue Multi-bad atea: 700/800/900/1800/1900/UMTS/2600/3500/5000/ LTE/W-LAN ad GPS, GLONASS, BEIDOU.

20 Trai Atea MHz ad GPS, GLONASS, BEIDOU , Prelimiary Issue Multi-bad atea: 700/800/900/1800/1900/UMTS/2600/3500/5000/ LTE/W-LAN ad GPS, GLONASS, BEIDOU. The atea ca be operated i all frequecy rages simultaeously. Low profile atea i fiberglass radome. The atea fulfils the requiremets accordig to EN Type No Atea multi-bad Iput Frequecy rage MHz VSWR MHz: < MHz: < MHz: < 1.7 Gai db 0 (ref. to the quarter-wave atea) Impedace Ω 50 Polarizatio Max. power W 40 (at 50 C ambiet temperature) Ier coductor DC grouded Atea GPS / Galileo / GLONASS / BEIDOU Frequecy rage MHz Polarizatio Right had circular Gai (90 Elevatio) dbi BEIDOU: 1 typ. GPS / Galileo: 2.5 typ. GLONASS: 1.5 typ. Itegrated LNA Frequecy rage MHz VSWR < 2.0 Gai db 22 (at 1.1 V voltage) (at 5.5 V voltage) Noise figure db 3 typ. VSWR < 2.0 Operatio voltage V Operatio curret ma Iput SMA female iches cable legth Radome weight g lb Total weight g lb ~ 570 ~ 1.26 Packig size iches 170 x 120 x x 4.7 x 3.9 Moutig flage: diameter Height iches Moutig: Radiator: Alumium Flage: Alumium. Radome: Fiberglass. All screws ad uts: Stailess steel. Colour: Grey. Sealig: Polyuretha ad silico. Note: Do t use detergets that might harm the sealig. O a coductive surface with a miimum size of 50 x 50 cm 19.7 x 19.7 iches usig 4 M10 bolts. Moutig hole for the coector: 33 (max. 35) 1.3 (max. 1.4) iches diameter. Note: Keep moutig surface clear of pait for electrical cotact. Eveess of opposite surface iches. Use a cap ut or hex-head screw plus the eclosed sealig washer. Groudig ad high voltage protectio: This atea, tested by a idepedet istitute, is DC grouded to protect agaist lightig ad high-tesio lies. Hex-head screw M10 torque 15 Nm 20 Nm Added sealig washer Cap ut M10 DIN 1587 torque 15 Nm 20 Nm Situatio of moutig All dimesios i iches 20

Low Noise Amplifier GPS 86010142 The low oise amplifier 86010142 is desiged for the use iside vehicles with trai ateas with GPS.

21 Low Noise Amplifier GPS The low oise amplifier is desiged for the use iside vehicles with trai ateas with GPS. It icludes a preselectio filter to prevet the iter ferece i case of simultaeous operatio at the frequecy rage / MHz ad GPS. The product fulfils the requiremets accordig to EN Block Diagram lowpass badpass filter GPS amplifier badpass filter GPS amplifier badpass filter GPS bias-t Iput TNC female Output Type No Frequecy MHz , L1-sigal Gai db 25 ±2 Noise figure db < 2.0 VSWR (iput, output) < 1.8 Operatio voltage V, ripple < 50 mv, supplied at ier coductor RF-output Operatio curret ma 25 Coector iput TNC female Coector output Dimesios (w x h x l) Moutig iches iches 70 x 22 x x 0.9 x holes, 4.5 diameter 4 holes, 0.2 diameter 1) ) ) Iput (Atea) TNC 1) Additioal features: The maximum iput power at the iput of the amplifier at the frequecy rage MHz ad MHz is limited to +25 dbm ) The oise level at the GPS-frequecy geerated by the operatio at the frequecy rage MHz ad MHz should ot exceed the thermal oise level at the iput of the GPS-amplifier, otherwise the oise figure will be icreased. N 3) Evirometal coditios: Temperature rage: 25 C +55 C (data as specified) 40 C +85 C (exteded rage) *) Output (DC V) Protectio class: IP 54 (DIN / IEC 144) (hagig istallatio positio) ceilig *) Exteded rage of operatio: Withi a exteded temperature rage of 40 C +85 C ad a exteded supplied voltage rage of 3.0 V 6.0 V operatio is possible with the followig restrictios: Noise figure: < 2.5 db Gai: > 20 db bottom top Hagig istallatio positio All dimesios i iches 21

22 Istallatio Guidelies Abstract Quality is the Key Trai ateas made by Kathrei are well kow as reliable ad highly sophisticated products. Our ateas are distiguished by excellet voltage protectio agaist accidetally high voltage cotacts due to well developed groudig elemets implemeted i the overall desig. Trai ateas are subject to extreme evirometal coditios ad have to withstad tremedous operatioal coditios. The followig documets will help to uderstad fuctioality ad give iformatio about proper istallatio procedures. Desig Depedig o frequecy ad desig costraits, Kathrei ateas are desiged as λ/4 radiators or as λ/2 radiators. For proper fuctioality, λ/4 radiators have to be mouted o a coductive surface creatig a groud plae. Trai ateas are usually vertically polarized. The impedace is 50 Ohm. Kathrei atea desigs are tested i accordace with the stadards idicated o page 26 ad 27. A key feature of Kathrei ateas to pass these requiremets is the ability to limit the coector voltage to 60 V i case of cotact with high tesio lies. A curret flow of 40 ka over a time frame of 100 ms ad high voltages of up to 42 kv could be applied uder worst case coditios. Trai Ateas Low Noise Amplifier (GPS) 22

23 Istallatio Guidelies Istallatio Groud Plae Fudametal RF basics require metallic surfaces for certai atea desigs. Utilizig λ/4 techologies depeds o a sufficiet groud plae surface to fially distribute RF wave ito the surroudigs. Therefore, these particular ateas eed to be mouted agaist a coductive surface to create the required groud plae. Each data sheet gives detailed iformatio about the surface size. We strogly recoed ot to stay uder the miimum moutig requiremets. Ateas easily will lose VSWR performace, ad their radiatio patter may chage dramatically. λ/4 E - Field electrical groud plae Horizo 10 3 db virtual field lies 0 Figure 1: Electrical field ad radiatio patter of a λ/4 atea desig Metallic Surfaces I most of the cases, the roofs of trais are made out of metallic materials. These materials have a reasoable coductivity to achieve best radiatio results. For safety reasos, these surfaces eed to offer sufficiet groudig to fially lead high voltages ad currets to groud. No-Metallic Surfaces Trai desigs appear more ad more with o- metallic surfaces mostly preset at the frot or the ed of a trai. Apparetly those areas are preferred istallatio areas for ateas. desigs may apply to create such a plae. Metallic foils might be placed udereath a o-metallic trai body. Other metals might be lamiated ito fiberglass costructios. The atea flage eeds to have good electrical cotact to these additioal groud plaes. The same madatory rule applies as with metallic surfaces: A sufficiet groudig of the atea eeds to be cosidered i the desig. Ay kid of groudig eeds to hadle high currets ad voltages, ad fially lead them to groud. As explaied previously, ateas require groud plaes made out of coductive material. Several 23

Istallatio Guidelies Groudig I case of a accidet or a failure of the high tesio lie (overhead cotact lie), high voltage ad curret might be applied to the atea.

24 Istallatio Guidelies Groudig I case of a accidet or a failure of the high tesio lie (overhead cotact lie), high voltage ad curret might be applied to the atea. To protect people ad equipmet, the coector voltage of the atea is ot to exceed 60 V. To guaratee low coector voltages, atea flages eed to be grouded thoroughly. separate groud ig of the atea moutig flage is required. Upaited areas ear the four moutig holes of the atea flage. groudig rod To achieve best coductivity, moutig surfaces at the atea socket ad the matig surface of the trai should be clea. Ay pait residues or other types of pollutio eed to be removed prior to the moutig process. I case of o-metallic roof surfaces with a additioal groud plae of e. g. thi material, a Figure 2: Iside groudig Moutig Most ateas are desiged with a stadardized foot prit of the moutig socket. Dimesios are stated i the data sheets. Moutig Positio The ateas have to be mouted directly to the groud plae. Moutig Sockets Most atea sockets offer four screw holes to tighte the flage agaist the moutig surface. We recoed the followig: Moutig agaist a separate flage with itegrated moutig bolts. This flage is usually welded to the trai. Depedig o the overall moutig situatio (please refer to Obstacles close to the atea ) it is temptig to elevate ateas agaist the trai roofs with high flages or other objects. To avoid mistuig ad malfuctioig ateas, it is madatory ot to mout ay such objects betwee the atea ad the roof. Resoace frequecy, radiatio patter, ad VSWR would chage dramatically or could be lost completely. I geeral, moutig screws or uts should ot add more tha 15 to the moutig surface, especially if cap uts are used. I case of a atea istallatio with screws through the atea socket ito the vehicle, particular attetio should be paid to the sealig of the screws uder cosideratio of the groudig istructios. Figure 3: Low profile broad bad atea with moutig screws 24

25 Istallatio Guidelies Sealig To avoid corrosio ad leakage ito the vehicle, atea coectors must be sealed agaist the moutig plate. Every Kathrei atea is supplied with detailed moutig istructios. A O-rig is supplied with each atea to seal the through hole i the vehicle body agaist the atea coector. For certai types, this rig rus aroud the whole flage. To achieve advaced sealig, matig surfaces betwee the atea socket ad moutig flage/moutig surfaces have to be flat. Sealig also eeds to be performed aroud moutig holes if o moutig flages are used. Corrosio at matig surfaces betwee the atea ad the moutig plae is critical for proper fuctioig of the atea. Paitig For optical reasos, the color of trai ateas sometimes has to match certai other colors. Kathrei ateas are particularly suitable for subsequet, log-lastig paitig sice the visible parts (radomes) are geerally made of fiberglass (polyester), to which pait adheres very well. A thi layer of pait evetually has oly a egligible ifluece o the electrical characteristics. We recoed that paitig is oly applied to visible surfaces: e.g. Fiberglass radome Atea socket, upper surface please refer to istructios stated i our data sheets The cotact area o the lower part of the flage must be kept free of pait at all times. Geeral remarks: We recoed that paitig is oly performed by qualified professioal paitig compaies. If required, paitig o site may also be possible (ad permissible). Suitable coercial paits cosist of oe or two compoets. The maufacturer s istructio for use ad processig must be observed. Paits with metallic effects or metallic compoets are ot permissible. Obstacles Close to the Atea For proper wave propagatio from the atea ito the surroudig area, the roof should be flat without ay obstacles. Trais sometimes have a umber of structures for multiple purposes o their roofs. Ay obstacles close to the atea may impact radiatio patter ad radiated waves. It is difficult to give geeral guidelies about miimum distaces. As a rule of thumb, ateas should face o obstacles withi a radius of approximately 1 m or more. Distaces to Other Ateas The distace to other ateas depeds o the required atea isolatio. This value has to be clarified with the suppliers of the istalled mobile couicatio system. A isolatio of 30 db is a preferred value. Geerally speakig, a distace of approximately 5 7 lambda is required for ateas operatig the same frequecy bad. Due to the selectivity of differet systems, ateas operatig i differet frequecy bads require distaces that ca be eve smaller. 25

26 Overview of Stadards / Guidelies for Trai Ateas K K UL94 HB DIN EN : 2013 DIN 5510 T2 IP Class (whe mouted properly) IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 EN EN EN EN (evirometal coditios) EN EN EN EN EN EN ETS class 2.2 ETS T 1.2 ETS T 5.2 ETS T 2.2 ETS T 1.2 Product complies with the stadard/guidelies Product does ot meet the stadard/guidelies 26

27 Overview of Stadards / Guidelies for Trai Ateas K K * * IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 Product complies with the stadard/guidelies Product does ot meet the stadard/guidelies * At the date of publicatio, test still pedig 27

28 KATHREIN-Werke KG Ato-Kathrei-Straße Roseheim, Germay Phoe mobilcom@kathrei.de /0117/PSA Techical data subject to chage. Title: fotolia.com LuckyImages

Special Communication. Antennas and Solutions for Blue Light and Armed Forces SPECIAL COMMUNICATION

Special Communication. Antennas and Solutions for Blue Light and Armed Forces SPECIAL COMMUNICATION CATA L O G U E Special Couicatio Ateas ad Solutios for Blue Light ad Armed Forces SPECIAL COMMUNICATION Who we are ad what we stad for Kathrei is a leadig iteratioal specialist for reliable, high-quality