Special Communication

Transcription

1 CATALOGUE 2018/2 Special Counication Antennas and Solutions for Blue Light and Armed Forces SPECIAL COMMUNICATION

2 Who we are and what we stand for Kathrein is a specialist for reliable, high-quality counication technologies. The company is driving innovation and technology in today s connected world. Its ability to provide solutions and services enables people all over the world to counicate, access information and use media, whether at home, at the office or on the road. The business covers a broad spectrum: from mobile counication, RFID and special solutions, to satellite reception and broadcast technology, to transmission and reception systems in vehicles. As a hidden champion and family-owned enterprise, Kathrein has been working on the technologies of tomorrow since The company takes pride in its dedicated employees and passion for customers and quality. Our Solutions BUSINESS SOLUTIONS MOBILE COMMUNICATION SAT SPECIAL COMMUNICATION BROADCAST AUTOMOTIVE Find out more about us at

3 MHz Directional Antennas Omni Antennas Indoor Antennas Special Purpose Antennas MHz MHz Directional Antennas Omni Antennas Indoor Antennas MHz MHz Directional Antennas Omni Antennas Indoor Antennas MHz Accessories Splitters and Tappers Dual-Band Combiners Low Noise Amplifier GPS Mechanical Accessories Kathrein s Remote Electrical Tilt System (RET) Accessories

4 4

5 Suary of Antenna Types, Antenna Line Products and Accessories The articles are listed by type number in numerical order. New or changed product. Type No. Page Type No. Page Type No. Page Type No. Page V K K K V V K K K K V K V K K K

6 Antenna Designs: Antenna Families / RET-system Distinguishing features Design Compact size and elegant design are the distinguishing features of Kathrein s antenna families. Radome The radomes cover the internal antenna components. The fiberglass material guarantees optimum performance with regards to stability, strength, UV resistance, painting and weather protection. The colour of the radome of outdoor panel antennas is similar to RAL Environmental influences Kathrein antenna designs are based on fundamental engineering knowledge and also on our decades of practical experience, during which the various constructions and materials used have proved their outstanding reliability. Environmental conditions Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS class 4.1 E. The antennas exceed this standard with regards to the following items: Low temperature: 55 C High temperature (dry): +60 C Environmental tests Kathrein antennas are designed according to the specifications as defined in ETS The homogenous design of Kathreins antenna families uses identical modules and materials. Extensive tests have been performed on typical samples and modules. The vibration test has been adapted relating to frequency and acceleration to the conditions of mast mounted antennas. Impedance Standard Impedance for all products is 50 Ω unless otherwise stated. Great variety of half-power beam width, gain values, electrical downtilt According to the antenna type selected, customers can choose from different half-power beam widths, gain values and electrical downtilts for panel antennas. Downtilts are either fixed or adjustable and controlled by remote electrical tilt system (RET). Low intermodulation products (typ. < 153 dbc) With many years of experience in the construction of antennas and intensive research into the effects of intermodulation, we offer optimized material and technology used for antennas (the given value refers to 3rd order products measured with 2 carriers of 20 W each). Excellent tracking Tracking states the syetry between the +45 and 45 polarized horizontal pattern. Bad tracking values lead to interferences in the network and reduced diversity performance. Kathreins special Tracking compensa tion reduces the average value measured at ±60 to < 2 3 db. 6

7 Antenna Designs: Antenna Families / RET-system Distinguishing features Multi-array design Besides standard single array antennas, Kathrein designs antennas providing multiple antenna arrays in one radome. These multi-array antennas do not only supply a future-proof multiplicity of diverse frequency bands for various technologies, but are also well-prepared for different MIMO-applications. The Kathrein portfolio contains a high variety of design solutions like interleaved and side-by-side antenna types or combinations of both as well as filter realizations. Multi-functional installation hardware Depending on the type, the antennas are equipped with up to 2 attachment points. Panels can be wall-mounted without any additional hardware. For mast-mounting, brackets and mechanical downtilt kits are available. To assist the installation technicians in aligning the panels, an azimuth adjustment tool can be supplied (see Mechanical Accessories). MTBF Statement Traditionally, passive components like antennas cannot be well calculated due to the lack of a sufficient number of components in the MTBF library. Unfortunately, this constraint results in a very inaccurate calculation. Thus, such results are technically questionable and unrealistic. In essence, antennas are made out of mechnical parts that do not show any failure rates. Only available failure rates can be calculated into an MTBF value. Consequently such components cannot be listed in any MTBF library. Remote Electrical Tilt System AISG Compliancy Kathrein hereby states that RET devices, as far as the functionality and features are described within the AISG / 3GPP standard, are compliant with the standard. NGMN-P-BASTA All antennas which are measured according to the specifications given in NGMN-P-BASTA White Paper Version 9.6 are clearly marked in the data sheet. Kathrein is changing over more and more data sheets to NGMN-P-BASTA. The latest data sheets can be found on our homepage. RET RFID Functionality Kathrein s latest Remote Control Unit (RCU) is equipped with an internal RFID reader. Most of our antennas are equipped with RFID tags in their spindles. With this, all relevant antenna data can automatically be read out by the RCU. Further information as well as an up-to-date list of the antennas can be found on our homepage. The according data sheets are marked by an RFID sign Connectors Partly, Kathrein s latest mobile counication antennas and antenna line products are equipped with connectors. The advantages of this connector are: Reduced dimensions on the bottom plate for more installation space Improved PIM stability and performance Easier installation, lower tightening torque The universal jack can be used with 3 different connector types (screw type, push-pull type and hand screw type). 7

8 Downtilting of Antennas with external RCU: Downtilt Possibilities Mechanical downtilt Electrical downtilt For further technical information please see Mechanical Accessories, page 85. Description of the adjustment mechanism (protective cap removed): ➀ Twist protection. ➁ Downtilt spindle with integrated scale. Manual adjustment procedure: ➀ Thread for fixing the protective cap or the RCU (Remote Control Unit). ➁ Gearwheel for RCU power drive. To set the downtilt angle exactly, you must look horizontally at the scale. The lower edge of the gear wheel must be used for alignment. 0 max. 0 max. Remove the protective cap and the twist protection completely. Remote Electrical Tilt (RET) For further technical information please see RET, pages 88 and 89. Description of bottom end cap (exemplary picture): Set downtilt angle by rotating the gearwheel. Screw on the twist protection and the protective cap again. Adjustment mechanism (protective cap removed) Ventilation hole Spindle with tilting scale female (long neck) Colour coding: Correlation of each RF input to: the corresponding adjustment mechanism the frequency range the polarization

9 Dimensions of Panels Antenna dimensions and detailed connector position can be found on our current data sheets. Please refer to the information on our latest data sheets which are available on our homepage: g Mobile Counication An example is shown below of how the antenna dimensions are displayed on our data sheets: Front view Bottom view ) 2) * * Y1 L Y1 L R2 L R1 L R2 L R1 L Y2 R Y2 R * * Dimensions refer to radome 3) 1) ) ) All dimensions in 9

10 Kathrein Antennas Product Description (Type) 6-Port Antenna LB/2HB 1.4m dBi 2x dBi Number of Ports Frequency Range(s) Length Horizontal Half-power Beam Width(s) Frequency Range and Gain Value 10

11 Suary Antennas MHz Type Type No. Height [] Page MHz Directional Antennas 2-Port Antenna dBi x 7-16 female 12 2-Port Antenna dBi 0 14 T x 7-16 female 13 2-Port Antenna dBi x 7-16 female 14 2-Port Antenna dBi x 7-16 female 15 2-Port Antenna dBi x 7-16 female 16 1-Port Antenna dBi female 17 1-Port Antenna dBi female 18 1-Port LogPer dBi female 19 4-Port Antenna dBi 2 T 16dBi 2 T x female 20 Omnidirectional Antennas 1-Port Omni dBi N female 21 1-Port Omni dBi K N female 21 1-Port Omni dBi K N female 22 1-Port Omni dBi K female 23 1-Port Omni dBi 8.5 T female 24 1-Port Omni dBi female 25 Indoor Omnidirectional Antennas 1-Port Omni dBi N female 26 1-Port Omni dBi N female 26 1-Port Omni dBi N female 26 1-Port Omni dBi N female 27 1-Port Omni dBi female 27 Indoor Directional Antennas Single-band 1-Port Indoor dBi N female 28 1-Port Indoor dBi N female 28 1-Port Indoor dBi N female 28 Special Purpose Antennas Special Purpose Antenna N female 29 Special Purpose Antenna GPS N female 30 Special Purpose Antenna K M 11 x 1 female 31 Special Purpose Antenna K N female 31 Special Purpose Antenna K N female 32 New or changed product 11

12 db db Panel Dual Polarization Half-power Beam Width X 2-Port Antenna m 12dBi Type No Frequency range MHz MHz Polarization +45, , 45 Gain 11.5 dbi 12 dbi Half-power beam width Copolar +45 / 45 Front-to-back ratio Isolation Impedance Horizontal: 68 Vertical: 37 > 25 db > 30 db 50 Ω Horizontal: Vertical: 32 VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Ice protection: Grounding: Radiator: Tin-plated copper. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded MHz: +45 / 45 Polarization Horizontal Pattern Vertical Pattern MHz: +45 / 45 Polarization Horizontal Pattern Vertical Pattern db db 32 Mechanical specifications 2 x 7-16 female Connector position Rearside Wind load Frontal: 500 N (at 150 km/h) Lateral: 220 N (at 150 km/h) Rearside: 715 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 992 / 492 / 190 Category of mounting hardware M (Medium) Weight 12 kg Packing size 1140 x 523 x For more information about additional mounting accessories please refer to page 85

13 db db db db Panel Dual Polarization Half-power Beam Width Adjust. Electrical Downtilt set by hand or by optional RCU (Remote Control Unit) 2-Port Antenna m 14dBi 0 14 T Type No X Frequency range MHz MHz Polarization +45, , 45 Gain (dbi) Tilt Horizontal Pattern: Half-power beam width Front-to-back ratio, copolar > 25 db (180 ±30 ) Cross polar ratio 0 Maindirection ±60 Typically: 25 db > 10 db Vertical Pattern: Half-power beam width Electrical tilt 0 14, continuously adjustable Isolation > 30 db Impedance 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc (2 x 43 dbm carrier) Max. power per input 400 W (at 50 C ambient temperature) MHz Material: Ice protection: Grounding: Radiator: Tin-plated copper. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded MHz: +45 / 45 Polarization Mechanical specifications 0 Horizontal Pattern Vertical Pattern 0 14 electrical downtilt MHz: +45 / 45 Polarization Horizontal Pattern Vertical Pattern 0 14 electrical downtilt 2 x 7-16 female Connector position Bottom Adjustment mechanism 1 x, Position bottom continuously adjustable Wind load Frontal: 1160 N (at 150 km/h) Lateral: 480 N (at 150 km/h) Rearside: 1870 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 1999 / 575 / 199 Category of mounting hardware H (Heavy) Weight 22 kg Packing size 2250 x 640 x 225 For more information about additional mounting accessories please refer to page 85 13

14 db db Panel Dual Polarization Half-power Beam Width X 2-Port Antenna m 15dBi Type No Frequency range MHz MHz Polarization +45, , 45 Gain 14.5 dbi 15 dbi Half-power beam width Copolar +45 / 45 Front-to-back ratio Isolation Impedance Horizontal: Vertical: 18 > 25 db > 30 db 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Ice protection: Grounding: Radiator: Tin-plated copper. Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded / 45 Polarization Horizontal Pattern Vertical Pattern 18 Mechanical specifications 2 x 7-16 female Connector position Rearside Wind load Frontal: 1100 N (at 150 km/h) Lateral: 440 N (at 150 km/h) Rearside: 1540 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 2000 / 492 / 190 Category of mounting hardware H (Heavy) Weight 19 kg Packing size 2080 x 523 x For more information about additional mounting accessories please refer to page 85

15 db db Panel Dual Polarization Half-power Beam Width 2-Port Antenna m dBi Type No X MHz Frequency range MHz MHz Polarization +45, , 45 Gain 2 x 10 dbi 2 x 10.5 dbi Half-power beam width Copolar +45 / 45 Horizontal: 88 Vertical: 40 Horizontal: 86 Vertical: 35 Front-to-back ratio, copolar > 20 db > 20 db Isolation > 30 db > 30 db Impedance 50 Ω 50 Ω VSWR < 1.5 < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Ice protection: Grounding: Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded MHz: +45 / 45 Polarization db 10 3 Mechanical specifications 0 0 Horizontal Pattern Vertical Pattern MHz: +45 / 45 Polarization x 7-16 female Connector position Bottom Wind load Frontal: 420 N (at 150 km/h) Lateral: 220 N (at 150 km/h) Rearside: 540 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 1007 / 317 / 193 Category of mounting hardware M (Medium) Weight 10.5 kg Packing size 1140 x 330 x db 3 0 Horizontal Pattern 0 Vertical Pattern For more information about additional mounting accessories please refer to page 85 15

16 db db Panel Dual Polarization Half-power Beam Width X 88 2-Port Antenna m dBi Type No Frequency range MHz MHz Polarization +45, , 45 Gain 2 x 13 dbi 2 x 13.5 dbi Half-power beam width Copolar +45 / 45 Horizontal: 88 Vertical: 20 Horizontal: 86 Vertical: 17 Front-to-back ratio, copolar > 20 db > 20 db Isolation > 30 db > 30 db Impedance 50 Ω 50 Ω VSWR < 1.5 < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Ice protection: Grounding: Reflector screen: Weather-proof aluminum. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded MHz: +45 / 45 Polarization db 10 3 Mechanical specifications 0 0 Horizontal Pattern Vertical Pattern MHz: +45 / 45 Polarization x 7-16 female Connector position Bottom Wind load Frontal: 890 N (at 150 km/h) Lateral: 480 N (at 150 km/h) Rearside: 1150 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 1997 / 317 / 193 Category of mounting hardware H (Heavy) Weight 18.5 kg Packing size 2130 x 330 x db 3 0 Horizontal Pattern 0 Vertical Pattern 16 For more information about additional mounting accessories please refer to page 85

17 db db Multi-band Panel Vertical Polarization Half-power Beam Width V MHz 1-Port Antenna m 12dBi Type No Frequency range MHz MHz Polarization Vertical Vertical Gain 11.5 dbi 12 dbi Half-power beam width Copolar +45 / 45 Horizontal: 68 Vertical: 37 Horizontal: 63 Vertical: 32 Front-to-back ratio > 18 db > 20 db Impedance 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Ice protection: Grounding: Reflector screen: Weather-proof aluminum. Radiator: Tin-plated copper. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded MHz db Mechanical specifications 0 Horizontal Pattern Vertical Pattern x 7-16 female Connector position Rearside Wind load Frontal: 500 N (at 150 km/h) Lateral: 220 N (at 150 km/h) Rearside: 715 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 992 / 492 / 190 Category of mounting hardware M (Medium) Weight 12 kg Packing size 1140 x 523 x db 0 Horizontal Pattern 0 Vertical Pattern For more information about additional mounting accessories please refer to page 85 17

18 db db db db Multi-band Panel Vertical Polarization Half-power Beam Width V 1-Port Antenna m 15dBi Type No Frequency range MHz MHz Polarization Vertical Vertical Gain 14.5 dbi 15 dbi Half-power beam width Copolar +45 / 45 Front-to-back ratio Impedance Horizontal: 68 Vertical: 18 > 20 db 50 Ω Horizontal: 63 Vertical: 16 VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Ice protection: Grounding: Reflector screen: Weather-proof aluminum. Radiator: Tin-plated copper. Radome: Fiberglass, colour: Grey. All screws and nuts: Stainless steel. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded MHz Horizontal Pattern Vertical Pattern MHz Mechanical specifications 1 x 7-16 female Connector position Rearside Wind load Frontal: 1100 N (at 150 km/h) Lateral: 440 N (at 150 km/h) Rearside: 1540 N (at 150 km/h) Max. wind velocity 200 km/h Height/width/depth 2000 / 492 / 190 Category of mounting hardware H (Heavy) Weight 20 kg Packing size 2080 x 523 x Horizontal Pattern 0 Vertical Pattern 18 For more information about additional mounting accessories please refer to page 85

19 db Logarithmic-periodic Vertical Polarization Half-power Beam Width Port LogPer Antenna m 87 9dBi Type No Frequency range MHz MHz MHz Polarization Vertical Gain 9.2 dbi 9 dbi 8.7 dbi Half-power beam width Horizontal: 80 Vertical: 61 Impedance V 87 Horizontal: 85 Vertical: Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Horizontal: 88 Vertical: MHz Scope of supply: Material: Attachment: Ice protection: Grounding: Antenna with weather protective casing for straight connectors. Radiator: Weather resistant aluminium. Radome: Fiberglass, colour: White. All screws and nuts: Stainless steel. To tubular masts of diameter depending on the separate available clamps. Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. All metal parts of the antenna including the mounting kit and the inner conductor are DC grounded MHz db Horizontal Pattern Vertical Pattern MHz Mechanical specifications db Horizontal Pattern Vertical Pattern MHz female Connector position Rearside, pointing downwards Wind load Frontal: 54 N (at 150 km/h) Lateral: 150 N (at 150 km/h) Max. wind velocity 180 km/h Height/width/depth 785 / 400 / 400 Weight 6 kg Packing size 915 x 485 x db 0 Horizontal Pattern Vertical Pattern For more information about additional mounting accessories please refer to page 85 19

20 db db Panel Dual Polarization HPBW Fixed Electrical DT X X X X Special Counications Preliminary Preliminary Issue Issue 4-Port Antenna / m 88 / 13/16dBi 2 /2 T Type No Frequency range MHz MHz Polarization +45, , 45 Gain 2 x 13 dbi 2 x 16 dbi Horizontal Pattern: Half-power beam width 88 Front-to-back ratio, copolar > 20 db > 20 db Vertical Pattern: Half-power beam width 14 8 Electrical tilt 2, fixed 2, fixed Impedance 50 Ω 50 Ω VSWR < 1.5 < 1.5 Isolation: Intrasystem > 25 db > 25 db Isolation: Intersystem > 25 db Intermodulation IM3 < 150 dbc < 150 dbc (2 x 43 dbm carrier) Max. power per input 250 W* 250 W* * (at 50 C ambient temperature) tion MHz: +45 / 45 Polarization Horizontal Pattern Vertical Pattern MHz: +45 /-45 Polarization MHz: +45 / 45 Polarization db db Horizontal Pattern Vertical Pattern Mechanical specifications 4 x female Connector Position Backside Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Lateral: Rearside: Max. Wind Velocity km/h mph Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply kg lb 2600 / 317 / / 12.5 / 7.6 H (Heavy) 26.0 / 28.2 (clamps incl.) 57.3 / 62.3 (clamps incl.) 2733 / 330 / / 13.0 / 9.5 Panel and 2 units of clamps for diameter Page 1 of 2 20 For more information about additional mounting accessories please refer to page 85

21 Omnidirectional Antennas Vertical Polarization V MHz : 1-Port Omni Antenna m 360 2dBi K862232: 1-Port Omni Antenna m 360 2dBi Type No K Frequency range MHz MHz Polarization Vertical Gain 2 dbi Impedance 50 Ω VSWR MHz: < MHz: < 1.5 < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 37 dbm carrier) Max. power 100 W (at 50 C ambient temperature) Height Material: Mounting: Grounding: Radiator: Brass. Radome: Fiberglass, dia. 21, colour: Grey. Base: Aluminum. Mounting U-bolt and all screws and nuts: Stainless steel. The antenna can be attached in two ways with the supplied mounting kit: 1. On the tip of a tubular mast of diameter (connecting cable runs inside the mast). 2. Laterally at the tip of a tubular mast of diameter (connecting cable runs outside the mast). All metal parts of the antenna including the mounting kit are DC grounded. On the tip of a tubular mast Laterally at the tip of a tubular mast db Vertical Pattern 78 Mechanical specifications Connector position Wind load (at 150 km/h) Max. wind velocity Radome diameter Weight Height Packing size N lbf km/h mph kg lb K x 97 x x 3.8 x 25.7 N female Bottom x 97 x x 3.8 x

22 Half-wave Dipole Side-mounted Vertical Polarization V n Omnidirectional antenna with variable antenna-to-mast distance. n Depending on the distance of the radiator from the mast edge and also on the mast diameter, various radiation patterns can be achieved. 1-Port Omni Antenna VPol dBi Type No. K Frequency range MHz Polarization Vertical Gain dbi 4 Impedance Ω 50 VSWR MHz: < MHz: < 1.5; A = λ/ MHz: < 2.0; A > λ/4 Max. power per input W 450 (at 50 C ambient temperature) Material: Attachment: Special features: Grounding: Radiator: Hot-dip galvanized steel. Horizontal support pipe: Stainless steel. Mount: Aluminum. Tightening band and all screws and nuts: Stainless steel. Feedpoint radome: Fiberglass. To tubular masts of diameter using supplied stainless steel tightening band (20 wide, 0.8 gauge) (0.8 wide, 0.03 gauge). The distance from tubular mast to radiator is adjustable from All metal parts of the antenna including the inner conductor and the supplied mount are DC grounded. Horizontal radiation pattern: Depending on the distance A (edge of pipe mast to dipole) see sketch Distance A M = 15 Nm All dimensions in Mechanical specifications Wind load (at 150 km/h) Max. wind velocity Length Weight Packing size N lbf km/h mph kg lb N female x 330 x x 13.0 x

23 db Omnidirectional Antenna Vertical Polarization V MHz 1-Port Omni Antenna m dBi Type No. K Frequency range MHz Polarization Vertical Gain 7.5 dbi Impedance 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel. Mounting: Anti-static protection: Lightning protection: The antenna can be attached laterally at the tip of a tubular mast of diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast). All metal parts of the antenna as well as the supplied clamp attachment are grounded. The inner conductor is capacitively coupled. The antenna is designed to withstand a lightning current of up to 150 KA (impulse: 10/350 µs), according to IEC parts 1 4 and VDE , and thereby fulfils the requirements of lightning protection class II. Grounding cross-section: 22 2 copper. maximum mast top Mechanical specifications Vertical Pattern 17 Connector position Wind load Max. wind velocity Height Radome diameter Weight Packing size 7-16 female Bottom 200 N (at 150 km/h) 200 km/h kg 3316 x 148 x 112 Side-mounting brackets see page

24 Omnidirectional Antenna Vertical Polarization V Fixed Electrical Downtilt Port Omni Antenna m 360 8dBi 8.5 T Type No Frequency range MHz Polarization Vertical Gain 8 dbi Electrical tilt 8.5, fixed Impedance 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel Mounting: Anti-static protection: Lightning protection: The antenna can be attached laterally at the tip of a tubular mast of diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast). All metal parts of the antenna as well as the supplied clamp attachment are grounded. The inner conductor is capacitively coupled. The antenna is designed to withstand a lightning current of up to 150 KA (impulse: 10/350 µs), according to IEC parts 1 4 and VDE , and thereby fulfils the requirements of lightning protection class II. Grounding cross-section: 22 2 copper. maximum mast top db 0 Vertical Pattern 8.5 electrical downtilt 14 Mechanical specifications Connector position Wind load Max. wind velocity Height Radome diameter Weight Packing size 7-16 female Bottom 220 N (at 150 km/h) 180 km/h kg 3376 x 196 x Side-mounting brackets see page

25 Omnidirectional Antenna Vertical Polarization V MHz 1-Port Omni Antenna m dBi Type No Frequency range MHz Polarization Vertical Gain 8.5 dbi Impedance 50 Ω VSWR < 1.5 Intermodulation IM3 < 150 dbc ( 2 x 43 dbm carrier) Max. power per input 500 W (at 50 C ambient temperature) Material: Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel. Mounting: Anti-static protection: Lightning protection: The antenna can be attached laterally at the tip of a tubular mast of diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast). All metal parts of the antenna as well as the supplied clamp attachment are grounded. The inner conductor is capacitively coupled. The antenna is designed to withstand a lightning current of up to 150 KA (impulse: 10/350 µs), according to IEC parts 1 4 and VDE , and thereby fulfils the requirements of lightning protection class II. Grounding cross-section: 22 2 copper. maximum mast top Vertical Pattern db 12 Mechanical specifications Connector position Wind load Max. wind velocity Height Radome diameter Weight Packing size 7-16 female Bottom 220 N (at 150 km/h) 180 km/h kg 3379 x 206 x 152 Side-mounting brackets see page

26 Indoor Omnidirectional Antennas Vertical Polarization V The antennas need no additional groundplane : 1-Port Indoor Antenna dBi : 1-Port Indoor Antenna dBi : 1-Port Indoor Antenna dBi Type No Frequency range MHz MHz MHz Polarization Vertical Vertical Vertical Gain Approx. 2 dbi Approx. 2 dbi Approx. 2 dbi Impedance 50 Ω 50 Ω 50 Ω VSWR < 2.0 < 2.0 < 2.0 Max. power 50 W (at 50 C ambient temperature) 1 x N female Protection class IP 30 Weight 429 g Packing size 267 x 267 x 114 Diameter 258 Height 77 (without connector) Material: Mounting: Grounding: Available accessories: Reflector: Aluminium. Radome: High impact polystyrol, colour: White. Additional painting is possible. Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the N connector a hole in the ceiling with a diameter of 35 is required. All metal parts including the inner conductor are DC grounded. Power splitters ( MHz) N connector, female 3 holes 5 diameter diameter 1 min. dia min. dia min. dia. 35 Press radome against installed reflector. Rotate radome until it locks in place. Pull downwards to remove radome. 26

27 1-Port Indoor Omni Antenna Vertical Polarization The Multi-band Omni Antenna covers all the bands of Tetra, 2G and 3G cellular, as well as Wi-Fi and LTE. The antenna is aesthetic and has unobtrusive profile that blends easily with any environment. The antenna is easy-installed and is highly recoended as an outstandig logistic solution for in-bulding installations. The antenna is PIM certified, thus making it suitable for all multi-carrier systems. V MHz 1-Port Indoor dBi Type No / Frequency range MHz Polarization Linear, Vertical Gain (typ.) dbi 1 (2*) Impedance Ω 50 VSWR (max.) 3:1 (2.5:1*) 2:1 2:1 2:1 1.9:1 1.9:1 Intermodulation IM3 dbc < 155 (2 x 20 dbm carrier) Max. power W 50 (at 50 C ambient temperature) Flaability UL94 Weight g 550 Diameter 275 Height 187 (without connector) : N female : female * Specifications for ground plate of 40 cm and up, above a metal surface, with a spacing of Material: Mounting: Grounding: Back plane: Aluminum; protected through chemical passivation. Radome: UV protected polycarbonate. Ceiling mounting. All metal parts including the inner conductor are DC grounded PATENT PENDING PLATE Connector DANGEROUS PLATE 3 x Connector

28 Indoor Directional Antennas Vertical Polarization Half-power Beam Width V : 1-Port Indoor Antenna dBi : 1-Port Indoor Antenna dBi : 1-Port Indoor Antenna dBi Type No Frequency range MHz MHz MHz Polarization Vertical Vertical Vertical Gain Approx. 7 dbi Approx. 7 dbi Approx. 7 dbi Half-power beam width Horizontal: Approx. 90 Horizontal: Approx. 90 Horizontal: Approx. 90 Impedance 50 Ω 50 Ω 50 Ω VSWR < 2.0 < 2.0 < 2.0 Max. power 50 W (at 50 C ambient temperature) N female connector Protection class IP 30 Weight 1390 g Packing size 315 x 252 x 62 Height/width/depth 302 x 243 x 50 Material: Mounting: Reflector: Copper. Radome: High impact polystyrol, colour: White. Additional painting is possible. Mounting plates: Stainless steel. Two holes of 6 diameter in the mounting plate. Screws are not supplied. 90 Grounding: Available accessories: All metal parts including the inner conductor are DC grounded. Power splitters ( MHz) 10 3 db 0 Horizontal Pattern Mounting: Mount the attachment plate to the wall using two screws of 4 diameter in the position as indicated. Align the antenna over the attachment plate. Pull the antenna down to the stop. 28

29 Special Purpose Antenna MHz Low profile antenna in fiberglass radome. The antenna fulfils the requirements according to EN MHz Type No Antenna N female Frequency range MHz VSWR < 1.7 Gain db 0 (ref. to the quarter-wave antenna) Impedance Ω 50 Polarization Vertical Max. power W 100 (at 50 C ambient temperature) Inner conductor DC grounded Radome weight g lb Total weight g lb Approx Packing size, L x W x H Height 150 x 90 x x 3.5 x Material: Radiator: Copper and brass. Flange: Aluminum. Radome: Fiberglass. All screws and nuts: Stainless steel. Colour: Grey. Sealing: Neoprene and silicon. Note: Don t use detergents that might harm the sealing. Mounting flange: contact area Mounting: On a conductive surface with a minimum size of 1000 x x 39.4 using 4 M10 bolts. seal Grounding and high voltage protection: This antenna, tested by an independent institute, is DC grounded to protect against lightning and high-tension lines Antenna 400 MHz 11 diameter contact area Mounting hole for the connector: 33 (max. 35) 1.3 (max. 1.4) diameter. Note: Keep mounting surface clear of paint for electrical contact. Evenness of opposite surface Use a cap nut or hex-head screw plus the enclosed sealing washer. Hex-head screw M10 torque 15 Nm 20 Nm Added sealing washer Cap nut M10 DIN 1587 torque 15 Nm 20 Nm Situation of mounting All dimensions in 29

30 Special Purpose Antenna MHz and GPS 1575 MHz Two-band antenna: MHz and GPS. The antenna can be operated in both frequency ranges simultaneously. Low profile antenna in fiberglass radome. The antenna fulfils the requirements according to EN Type No Antenna MHz N female Frequency range MHz VSWR < 1.7 Gain 0 db (ref. to the quarter-wave antenna) Impedance 50 Ω Polarization Vertical Max. power 100 W (at 50 C ambient temperature) Inner conductor DC grounded Antenna GPS Cable RG 316/U of 225 length with TNC male connector Frequency range ±1 MHz VSWR < 1.5 Polarization Right hand circular Gain (90 elevation) 2 db (ref. to the circularly polarized isotropic antenna) Impedance 50 Ω Inner conductor DC grounded Radome weight 186 g Total weight Approx. 500 g Packing size 150 x 90 x 190 Height 150 Material: Mounting: Radiator: Copper and brass. Flange: Aluminum. Radome: Fiberglass. All screws and nuts: Stainless steel. Colour: Grey. Sealing: Neoprene and silicon. Note: Don t use detergents that might harm the sealing. On a conductive surface with a minimum size of 1000 x 1000 using 4 M10 bolts. Mounting flange: contact area seal Antenna GPS Antenna 400 MHz 11 diameter 142 Grounding and high voltage protection: This antenna, tested by an independent institute and approved by the Deutsche Bahn AG, is DC grounded to protect against lightning and high-tension lines. 82 contact area Accessories: Warning: Low noise amplifier GPS (please order separately). If the antenna is operated without the preamplifier type no , please note the following points. Due to the fact that the inner conductor of the antenna GPS is DC grounded, the input of the GPS receiver is loaded with a DC short circuit. If the GPS receiver provides a remote DC power supply, this could damage the GPS receiver. At the input of the antenna GPS a level of 25 db below the signal applied at the input of the antenna MHz appears. Depending on the level of the signal applied at the input of the antenna MHz, the GPS receiver may be overloaded or damaged. Mounting hole for the connector: 33 (max. 35) diameter. Note: Keep mounting surface clear of paint for electrical contact. Evenness of opposite surface 0.2. Use a cap nut or hex-head screw plus the enclosed sealing washer. Hex-head screw M10 torque 15 Nm 20 Nm Added sealing washer Cap nut M10 DIN 1587 torque 15 Nm 20 Nm 15 Situation of mounting 30

31 Special Purpose Antenna MHz K , K MHz Tram and Bus Antenna Type No. K K Drill hole dimension M 11 x 1 female (the connector for cable RG 58 C/U is supplied) N female Frequency range MHz MHz VSWR MHz: < MHz: < MHz: < 1.9 Gain db 0 (ref. to the quarter-wave antenna) Impedance Ω 50 Polarization Vertical Max. power W 50 W (at 50 C ambient temperature) Weight g lb lb Packing size (outside) Height Mounting 117 x 117 x x 4.6 x On a conductive surface 70 x 70 cm 27.6 x 27.6 min. Material: Mounting: Special features: Radiator and base: Aluminum. Radome: High impact plastic. All screws and nuts: Stainless steel. The drilling diameter is 12 except the N connector versions: 17. A special zinc washer ensures a good contact at the edges of the hole. All metall parts of this antenna are DC grounded. Extreme robust and car-wash proof vehicular antenna. 31

32 Special Purpose Antenna MHz K Low profile broadband antenna in fiberglass radome. Type No. K N female Frequency range MHz VSWR < 1.5 Gain db 0 (ref. to the quarter-wave antenna) Impedance Ω 50 Polarization Vertical Max. power W 170 (at 50 C ambient temperature) Radome weight g lb Total weight g lb Packing size (outside) 151 x 87 x x 3.4 x 8.3 Material: Mounting: Grounding and high voltage protection: Radiator and Flange: Aluminum. Radome: Fiberglass, colour: Light grey. All screws and nuts: Stainless steel. Sealing: Neoprene and rubber. Note: Don t use detergents that might harm the sealing. On a conductive surface with a minimum size of 50 x 50 cm 19.7 x 19.7 by means of existing M10 studs. This antenna, tested by an independent institute, is DC grounded to protect against lightning and high-tension lines. Mounting flange: Dichtungsring Sealing O-ring nicht lackiert not painted nicht lackiert not painted All dimensions in Mounting hole for the connector: 33 (max. 35) diameter. Note: Keep mounting surface clear of paint for electrical contact. 32

33 33

34 Suary Directional Antennas MHz Type Type No. Height [] Connector female, type and position Page 1 x Lowband 2-Port Antenna dBi 0 8 T V , rearside 36 2 x Lowband 4-Port Antenna dBi 15.5dBi 2 12 T 2 12 T , bottom Port Antenna dBi 16.5dBi 1 10 T 1 10 T , bottom TETRA 1 x Lowband 4-Port Antenna dBi 16dBi 2 T 2 T x female 20 1 x Lowband 1 x Highband 2-Port Antenna C 8dBi 9dBi 0 T 0 T , bottom 51 4-Port Antenna dBi 13.5dBi 2 T 2 T , bottom Port Antenna dBi 17.5dBi 0 16 T 2 10 T , bottom Port Antenna dBi 18.5dBi 0 10 T 2 8 T V , bottom Port Antenna dBi 18.5dBi T 2 8 T V , bottom x Lowband 2 x Highband 6-Port Antenna dBi 17.5dBi 18dBi 2 16 T T T , bottom Port Antenna dBi 18dBi 18dBi 2 12 T T T , bottom Port Antenna dBi 18dBi 18dBi 1 10 T T T , bottom MHz 1-Port LogPer Antenna dBi 0 T V , bottom 36 34

35 Suary Omni Antennas Indoor Antennas MHz Omni Antennas Type No. Connector female Height [] Remarks Page Lowband 1-Port Omni Antenna dBi 0 T Lowband Highband 1-Port Omni Antenna / dBi 0 T N 202 indoor/outdoor 71 Indoor Antennas Type No. Connector female Height [] Page MHz Directional 2-Port 2-Port Indoor Antenna / / C 7dBi x Omnidirectional 1-Port 1-Port Omni dBi N female Port Omni dBi female Omnidirectional 2-Port 2-Port Indoor Antenna dBi x New or changed product Abbreviations: C: Integrated Combiner 35

36 1-Port LogPer Antenna Vertical Polarization Half-power Beam Width V 67 1-Port LogPer Antenna dBi Type No V02 Frequency range MHz VSWR < 1.6 < 1.5 < 1.5 < 1.5 < 1.5 < 1.5 Gain dbi Impedance Ω Polarization Vertical Vertical Vertical Vertical Vertical Vertical Front-to-back ratio db > 25 > 25 > 25 > 25 > 22 > 25 Half-power beam width horizontal vertical Intermodulation IM3 (2 x 43 dbm carrier) dbc < 150 < 150 < 150 < 150 < 150 < 150 Max. power W Total power W 500 (at 50 C ambient temperature) Mechanical specifications Connector position Wind load (at Rated Wind Speed: 150 km/h) Max. wind velocity Height / width / depth Weight Packing size 1 x 7-16 female Bottom N lbf Frontal 20 4 Lateral Rearside 30 7 km/h mph / 155 / / 6.1 / 30.9 kg 5.5 lb x 175 x x 6.9 x

37 2-Port Antenna Frequency Range HPBW R Port Antenna LB 2.3m dBi Type No. Lowband V02 R Frequency range MHz Polarization +45, , , 45 Average gain Tilt dbi Horizontal Pattern: Half-power beam width Front-to-back ratio, copolar db > 25 > 25 > 25 Cross polar ratio Maindirection 0 Sector ±60 db Typically: 25 Typically: > 10 Typically: 25 Typically: > 10 Typically: 25 Typically: > 10 Tracking, Avg. db 0.5 Squint ±2.5 Vertical Pattern: Half-power beam width Electrical tilt 0 8, continuously adjustable Sidelobe suppression for first sidelobe above main beam T db MHz Impedance Ω 50 VSWR < 1.5 Isolation, between ports db > 30 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. effective power per port Max. effective power for the antenna W 400 (at 50 C ambient temperature) 800 (at 50 C ambient temperature) Mechanical specifications Connector position Adjustment mechanism 2 x 7-16 female Rearside 1x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. wind velocity km/h mph Height/width/depth Category of mounting hardware Weight kg lb Packing size Scope of supply / 259 / / 10.2 / 3.9 M (Medium) 11.5 / 13.5 (clamps incl.) 25.4 / 29.8 (clamps incl.) 2536 x 272 x x 10.7 x 3.9 Panel and 2 units of clamps for diameter For more information about additional mounting accessories please refer to page 85 37

38 4-Port Antenna Frequency Range HPBW R R Port Antenna 2LB 2.0m 2x dBi Type No Left side, lowband R1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 14.8 ± ± ± ± 0.2 Horizontal Pattern: Azimuth Beamwidth 62 ± ± ± ± 2.1 Front-to-Back Ratio, Total Power, ± 30 db > 22 > 25 > 27 > 25 Cross Polar Discrimination over Sector db > 8.5 > 10.5 > 11.5 > 11.0 Azimuth Beam Port-to-Port Tracking db < 1.5 < 1.0 < 1.0 < 1.5 Vertical Pattern: Elevation Beamwidth 11.9 ± ± ± ± 0.4 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.7 < 0.7 < 0.7 < 0.7 First Upper Side Lobe Suppression db > 14 > 14 > 15 > 14 Cross Polar Isolation db > 30 Port to Port Isolation db > 27 (R1 // R2) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Max. Effective Power Ports R1 W 800 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 38 For more information about additional mounting accessories please refer to page 85

39 4-Port Antenna Right side, lowband R2, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 14.8 ± ± ± ± 0.3 Horizontal Pattern: Azimuth Beamwidth 63 ± ± ± ± 3.7 Front-to-Back Ratio, Total Power, ± 30 db > 22 > 24 > 26 > 27 Cross Polar Discrimination over Sector db > 8.0 > 12.5 > 13.0 > 13.0 Azimuth Beam Port-to-Port Tracking db < 1.5 < 1.5 < 1.0 < 2.0 Vertical Pattern: Elevation Beamwidth 11.6 ± ± ± ± 0.5 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.7 < 0.6 < 0.6 < 0.5 First Upper Side Lobe Suppression db > 14 > 16 > 16 > 16 Cross Polar Isolation db > 30 Port to Port Isolation db > 27 (R2 // R1) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Max. Effective Power Ports R2 W 800 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements MHz Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 27 Passive Intermodulation dbc < 153 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 1200 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 4 x female bottom FlexRET, continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb The Category of Mounting Hardware will change to XM during / 508 / / 20.0 / 6.9 XH (X-Heavy) 41.0 / 46.0 (clamps incl.) 90.4 / (clamps incl.) 2200 / 542 / / 21.3 / 10.6 Panel, FlexRET and clamps for diameter For more information about additional mounting accessories please refer to page 85 39

40 4-Port Antenna Frequency Range HPBW R R Port Antenna 2LB 2.4m 2x dBi Type No Left side, lowband R1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 15.6 ± ± ± ± 0.3 Horizontal Pattern: Azimuth Beamwidth 66 ± ± ± ± 2.9 Front-to-Back Ratio, Total Power, ± 30 db > 23 > 23 > 24 > 25 Cross Polar Discrimination over Sector db > 10.0 > 9.5 > 10.0 > 11.5 Azimuth Beam Port-to-Port Tracking db < 1.5 < 1.0 < 1.0 < 1.5 Vertical Pattern: Elevation Beamwidth 9.7 ± ± ± ± 0.4 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.4 < 0.4 < 0.4 < 0.4 First Upper Side Lobe Suppression db > 16 > 17 > 17 > 20 Cross Polar Isolation db > 30 Port to Port Isolation db > 27 (R1 // R2) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Max. Effective Power Ports R1 W 800 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 40 For more information about additional mounting accessories please refer to page 85

41 4-Port Antenna Right side, lowband R2, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 15.5 ± ± ± ± 0.3 Horizontal Pattern: Azimuth Beamwidth 67 ± ± ± ± 4.3 Front-to-Back Ratio, Total Power, ± 30 db > 22 > 23 > 24 > 26 Cross Polar Discrimination over Sector db > 9.5 > 10.5 > 10.0 > 11.5 Azimuth Beam Port-to-Port Tracking db < 0.5 < 1.0 < 0.5 < 1.5 Vertical Pattern: Elevation Beamwidth 9.9 ± ± ± ± 0.5 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.4 < 0.4 < 0.4 < 0.3 First Upper Side Lobe Suppression db > 18 > 21 > 20 > 20 Cross Polar Isolation db > 30 Port to Port Isolation db > 27 (R2 // R1) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Max. Effective Power Ports R2 W 800 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements MHz Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 27 Passive Intermodulation dbc < 153 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 1200 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 4 x female bottom FlexRET, continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb / 508 / / 20.0 / 6.9 XH (X-Heavy) 47.0 / 52.0 (clamps incl.) / (clamps incl.) 2635 / 542 / / 21.3 / 10.6 Panel, FlexRET and 1 unit of clamps for diameter For more information about additional mounting accessories please refer to page 85 41

42 1-Port Omni Antenna Vertical Polarization V 1-Port Omni dBi Type No Frequency range MHz Polarization Vertical Gain dbi 11 Impedance Ω 50 VSWR < 1.5 Intermodulation IM3 dbc < 150 ( 2 x 43 dbm carrier) Max. power W 500 (at 50 C ambient temperature) Mounting: The antenna can be attached laterally at the tip of a tubular mast of diameter with two U-bolt brackets supplied with the antenna (connecting cable runs outside the mast). Material: Radiator: Copper and brass. Radome: Fiberglass, color: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel Grounding Lightning protection: All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded. The inner conductor is capacitively coupled. The antenna is designed to withstand a lightning current of up to 150 KA (impulse: 10/350 µs), according to IEC parts 1 4 and VDE , and thereby fulfils the requirements of lightning protection class II. Grounding cross-section: 22 2 copper. Mechanical specifications maximum mast top female Connector position Bottom Wind load (at Rated Wind Speed: 150 km/h) N lbf Max. wind velocity km/h mph Height Radome diameter Weight Packing size kg 8.5 lb x 148 x x 5.8 x Side-mounting brackets see page

43 43

44 Suary Directional Antennas MHz Type Type No. Height [] Connector female, type and position Page MHz 1-Port LogPer Antenna dBi 0 T V , bottom 36 1 x Highband 2-Port Antenna dBi 0 T , bottom or top 46 2-Port Antenna dBi 4 T , bottom 47 2-Port Antenna dBi 0 12 T , bottom 48 2-Port Antenna dBi 2 14 T ESLS V , bottom 49 2-Port Antenna dBi 0 6 T , bottom 50 1 x Lowband 1 x Highband 2-Port Antenna C 8dBi 9dBi 0 T 0 T , bottom 51 4-Port Antenna dBi 13.5dBi 2 T 2 T , bottom Port Antenna dBi 17.5dBi 0 16 T 2 10 T , bottom Port Antenna dBi 18.5dBi 0 10 T 2 8 T V , bottom Port Antenna dBi 18.5dBi T 2 8 T V , bottom x Highband 4-Port Antenna dBi 18dBi 2 14 T 2 14 T ESLS , bottom x Highband Special Design 4-Port MicroCell dBi 7.5dBi 0 T 0 T , bottom and top 68 1 x Lowband 2 x Highband 6-Port Antenna dBi 17.5dBi 18dBi 2 16 T T T , bottom Port Antenna dBi 18dBi 18dBi 2 12 T T T , bottom Port Antenna dBi 18dBi 18dBi 1 10 T T T , bottom x Highband Special Design 6-Port Tri-Sector Slimpole dBi 0 T , bottom 69 44

45 Suary Omni Antennas Indoor Antennas MHz Omni Antennas Type No. Connector female Height [] Remarks Page Highband 1-Port Omni Antenna dBi 0 T N 115 indoor/outdoor 70 Lowband Highband 1-Port Omni Antenna / dBi 0 T N 202 indoor/outdoor 71 Indoor Antennas Type No. Connector female Height [] Page Directional 2-Port 2-Port Indoor Antenna / / C 7dBi x Omnidirectional 1-Port 1-Port Omni dBi N female Port Omni dBi female Omnidirectional 2-Port 2-Port Indoor Antenna dBi x New or changed product MHz Abbreviations: ESLS: Enhanced Side Lobe Suppression (above or below horizon) C: Integrated Combiner 45

46 2-Port Antenna Frequency Range HPBW Y Port Antenna HB 0.2m dBi Type No Highband Y Frequency range MHz Polarization +45, , , , 45 Gain dbi Horizontal Pattern: Half-power beam width Approx. 67 Approx. 62 Approx. 55 Approx. 53 Front-to-back ratio, copolar (180 ±30 ) db > 24 > 24 > 22 > 22 Cross polar ratio 0 db Typically: 20 Typically: 20 Typically: 24 Typically: 24 Cross polar ratio sector corner ±60 db > 10 > 9 > 8 > 8 Vertical Pattern: Half-power beam width Approx. 66 Approx. 60 Approx. 55 Approx. 53 Impedance Ω 50 VSWR < 1.5 Isolation, between ports db > 27 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. power per input W 100 (at 50 C ambient temperature) Max. power per antenna W 150 (at 50 C ambient temperature) Mechanical specifications 2 x 7-16 female Connector position * Bottom or top Wind load (at Rated N lbf Frontal: 35 8 Wind Speed: 150 km/h) Maximal: 35 8 Max. wind velocity km/h mph Height / width / depth Category of mounting hardware Weight Packing size Scope of Supply kg lb 155 / 155 / / 6.1 / 2.7 L (Light) 1.5 (tension bands incl.) 3.3 (tension bands incl.) 257 x 172 x x 6.8 x 3.6 Panel and 1 unit of tension bands for diameter * Inverted mounting: Connector position top: Change drain hole screw 46 For more information about additional mounting accessories please refer to page 85

47 2-Port Antenna Frequency Range HPBW Y Port Antenna HB 0.3m dBi Type No Highband Y Frequency range MHz Polarization +45, , , , 45 Gain dbi Horizontal Pattern: Half-power beam width Front-to-back ratio, copolar db > 30 > 28 > 28 > 27 Cross polar ratio Maindirection 0 Sector ±60 db Typically: > 20 > 8 Typically: > 20 > 8 Typically: > 20 > 8 Typically: > 20 > 8 Vertical Pattern: Half-power beam width Electrical tilt 3, fixed 3, fixed 4, fixed 4, fixed Impedance Ω 50 VSWR < 1.5 Isolation, between ports db > 28 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. power per input W 150 (at 50 C ambient temperature) Mechanical specifications 2 x 7-16 female Connector position Bottom Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. wind velocity km/h mph Height/width/depth Category of mounting hardware Weight kg lb Packing size Scope of supply 278 / 154 / / 6.1 / 2.7 L (Light) 1.8 (tension bands incl.) 4.0 (tension bands incl.) 375 x 172 x x 6.8 x 39.1 Panel and 1 unit of tension bands for diameter MHz For more information about additional mounting accessories please refer to page 85 47

48 2-Port Antenna Frequency Range HPBW Y Port Antenna HB 0.9m dBi Type No Highband Y Frequency range MHz Polarization +45, , , , 45 Gain at 0 tilt dbi Horizontal Pattern: Half-power beam width Front-to-back ratio (180 ±30 ) db > 25 > 25 > 23 > 23 Cross polar ratio 0 Sector ±60 db Typically: 25 > 10 Typically: 28 > 8 Typically: 28 > 8 Typically: 28 > 11 Vertical Pattern: Half-power beam width Electrical tilt 0 12, continuously adjustable Sidelobe suppression for first sidelobe above main beam T db Impedance Ω 50 VSWR < 1.5 Isolation, between ports db > 30 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. power per input W 250 (at 50 C ambient temperature) Mechanical specifications Connector position Adjustment mechanism 2 x 7-16 female Bottom 1x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. wind velocity km/h mph Height/width/depth Category of mounting hardware Weight kg lb Packing size Scope of supply / 155 / / 6.1 / 2.8 L (Light) 5 / 5.2 (clamps incl.) 11.0 / 11.5 (clamps incl.) 1146 x 172 x x 6.8 x 3.6 Panel and 1 unit of tension bands for diameter 48 For more information about additional mounting accessories please refer to page 85

49 2-Port Antenna Frequency Range HPBW Y Port Antenna HB 1.5 m dBi ESLS Type No. Highband V02 Y Frequency range MHz Polarization +45, , , , 45 Gain Tilt dbi Horizontal Pattern: Half-power beam width Front-to-back ratio (180 ±30 ) db > 25 > 25 > 25 > 25 Cross polar ratio 0 Sector ±60 db Typically: 25 > 10 Typically: 24 > 10 Typically: 25 > 10 Typically: 25 > 10 Tracking, Avg. db 1.5 Vertical Pattern: Half-power beam width Electrical tilt 2 14, continuously adjustable Sidelobe suppression for first sidelobe above main beam within 0 20 sector above horizon T db db Impedance Ω 50 VSWR < 1.5 Isolation, between ports db > 30 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. effective power per port Max. effective power for the antenna W 250 (at 50 C ambient temperature) 500 (at 50 C ambient temperature) Mechanical specifications Connector position Adjustment mechanism 2 x 7-16 female Bottom 1x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. wind velocity km/h mph Height/width/depth Category of mounting hardware Weight kg lb Packing size Scope of supply / 154 / / 6.0 / 2.8 M (Medium) 6.5 / 8.5 (clamps incl.) 4.3 / 18.7 (clamps incl.) 1725 x 172 x x 6.8 x 3.6 Panel and 2 units of clamps for diameter MHz For more information about additional mounting accessories please refer to page 85 49

50 2-Port Antenna Frequency Range HPBW Y Port Antenna HB 1.7m dBi Type No Highband Y Frequency range MHz Polarization +45, , , , 45 Gain at 0 tilt db Horizontal Pattern: Half-power beam width Front-to-back ratio (180 ±30 ) db > 28 > 28 > 25 > 25 Cross polar ratio 0 Sector ±60 db Typically: 25 > 10 Typically: 25 > 10 Typically: 25 > 10 Typically: 28 > 10 Tracking, Avg. db 1.5 Squint ±3 Vertical Pattern: Half-power beam width Electrical tilt 0 6, continuously adjustable Sidelobe supression for first sidelobe above main beam T db Impedance Ω 50 VSWR < 1.5 Isolation, between ports db > 30 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. power per input W 300 (at 50 C ambient temperature) Mechanical specifications Connector position Adjustment mechanism 2 x 7-16 female Bottom 1x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. wind velocity km/h mph Height/width/depth Category of mounting hardware Weight kg lb Packing size Scope of supply / 155 / / 6.1 / 2.8 M (Medium) 7 / 9.2 (clamps incl.) 15.4 / 20.3 (clamps incl.) 1934 x 172 x x 6.8 x 3.6 Panel and 2 units of clamps for diameter 50 For more information about additional mounting accessories please refer to page 85

51 2-Port Antenna Frequency Range HPBW R Y Port Antenna LB/HB 0.3m C dBi dBi Type No R1 Y Frequency range MHz Polarization +45, , , , , , , 45 Average gain (dbi) dbi 2 x x x x x x x 8.2 Horizontal Pattern: Half-power beam width Front-to-back ratio db Copolar: > 25 Copolar: > 25 Copolar: > 25 Copolar: > 25 Copolar: > 25 Copolar: > 25 Copolar: > 25 Cross polar ratio Maindirection 0 Sector ±60 db Typically: 15 > 8 Typically: 18 > 8 Typically: 20 > 8 Typically: 25 > 10 Typically: 25 > 10 Typically: 25 > 10 Typically: 25 > 10 Vertical Pattern: Half-power beam width Impedance Ω 50 VSWR < 1.5 Isolation: Intrasystem db > 30 > 30 > 27 > 25 Intermodulation IM3 dbc < 150 dbc (2 x 43 dbm carrier) Max. effective power per port W 200 (at 50 C ambient temperature) 100 (at 50 C ambient temperature) Max. effective power for the antenna W 300 (at 50 C ambient temperature) C C Mechanical specifications 2 x 7-16 female Connector position Bottom Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. wind velocity km/h mph Height / width / depth Category of mounting hardware Weight Packing size Scope of Supply kg lb 334 / 260 / / 10.2 / 5.4 L (Light) 2.8 (tension bands incl.) 6.2 (tension bands incl.) 495 x 272 x x 10.7 x 6.2 Panel and 1 unit of tension bands for diameter MHz For more information about additional mounting accessories please refer to page 85 51

52 4-Port Antenna Frequency Range HPBW R Y Port Antenna LB/HB 0.6m dBi dBi Type No Lowband R1, connector Frequency range MHz MHz MHz MHz Polarization +45, , , 45 Average gain dbi Horizontal Pattern: Half-power beam width Front-to-back ratio Total power, ± 30 db > 23 > 25 > 25 Cross polar ratio Maindirection 0 Sector ±60 db Typically: 25 > 8 Typically: 28 > 10 Typically: 28 > 10 Vertical Pattern: Half-power beam width Electrical tilt 2, fixed Impedance Ω 50 VSWR < 1.5 Isolation: Intrasystem db > 27, typ. > 30 > 30 > 28, typ. > 30 Isolation: Intersystem db > 26, typ. > 30 (R1 // Y1) Intermodulation IM3 dbc < 153 (2 x 43 dbm carrier) Max. effective power per port Max. effective power for the antenna W 250 (at 50 C ambient temperature) 400 (at 50 C ambient temperature) 52 For more information about additional mounting accessories please refer to page 85

53 4-Port Antenna Highband Y1, connector Frequency range MHz Polarization +45, , , , , 45 Average gain dbi Horizontal Pattern: Half-power beam width Front-to-back ratio Total power, ± 30 db > 26 > 27 > 27 > 27 > 25 Cross polar ratio Maindirection 0 Sector ±60 db Typically: 25 > 10 Vertical Pattern: Half-power beam width Electrical tilt 2, fixed Impedance Ω 50 VSWR < 1.5 Isolation: Intrasystem db > 26, typ. > 31 > 30, typ. > 31 Isolation: Intersystem db > 30 (Y1 // R1) Intermodulation IM3 dbc < 153 (2 x 43 dbm carrier) Max. effective power per port Max. effective power for the antenna W > 28 > > (at 50 C ambient temperature) 400 (at 50 C ambient temperature) Total power for the antenna W 800 (at 50 C ambient temperature) 25 > > 10 Mechanical specifications 4 x female Connector position Bottom Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. wind velocity km/h mph Height/width/depth Category of mounting hardware Weight kg lb Packing size Scope of supply 603 / 300 / / 11.8 / 6.0 M (Medium) 8.5 / 10.7 (clamps incl.) 18.7 / 23.6 (clamps incl.) 845 x 325 x x 12.8 x 7.6 Panel and 2 units of clamps for diameter MHz For more information about additional mounting accessories please refer to page 85 53

54 4-Port Antenna Frequency Range HPBW R Y Port Antenna LB/HB 1.4m dBi dBi Type No Lowband R1, connector Frequency range MHz Polarization +45, , , 45 Average gain Tilt dbi Horizontal Pattern: Half-power beam width Front-to-back ratio, copolar (180 ±30 ) db > 25 > 25 > 25 Cross polar ratio Maindirection 0 Sector ±60 db Typically: 25 > 10 Typically: 25 > 9 Typically: 25 > 8 Horizontal Pattern: Half-power beam width Electrical tilt 0 16, continuously adjustable Sidelobe suppression for first sidelobe above main beam T db Impedance Ω 50 VSWR < 1.5 Isolation: Intrasystem db > 30 Isolation: Intersystem db > 30 ( // MHz) Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. effective power per port Max. effective power for the antenna W 300 (at 50 C ambient temperature) 600 (at 50 C ambient temperature) For more information about additional mounting accessories please refer to page 85

55 4-Port Antenna Highband Y1, connector Frequency range MHz Polarization +45, , , , , 45 Average gain Tilt dbi Horizontal Pattern: Half-power beam width Front-to-back ratio, copolar (180 ±30 ) db > 25 > 28 > 29 > 26 > 25 Cross polar ratio Maindirection 0 Sector ±60 db Typically: 18 > 9 Horizontal Pattern: Half-power beam width Electrical tilt 2 10, continuously adjustable Sidelobe suppression for first sidelobe above main beam T db > 20 > > > > Impedance Ω 50 VSWR < 1.5 Isolation: Intrasystem db > 28 > 30 Isolation: Intersystem db > 30 ( // MHz) Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. effective power per port Max. effective power for the antenna W 200 (at 50 C ambient temperature) 400 (at 50 C ambient temperature) Mechanical specifications Connector position Adjustment mechanism 4 x 7-16 female (long neck) Bottom 2x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. wind velocity Height / width / depth Category of mounting hardware Weight Packing size Scope of supply km/h mph kg lb / 300 / / 11.8 / 6.0 M (Medium) 18 / 20 (clamps incl.) 39.7 / 44.1 (clamps incl.) 1726 x 322 x x 12.7 x 7.5 Panel and 2 units of clamps for diameter MHz For more information about additional mounting accessories please refer to page 85 55

56 4-Port Antenna Frequency Range HPBW R Y Port Antenna LB/HB 2.0m dBi dBi Type No V01 Lowband R1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 15.9 ± ± ± 0.3 Horizontal Pattern: Azimuth Beamwidth 69 ± ± ± 0.6 Front-to-Back Ratio, Total Power, ± 30 db > 23 > 25 > 26 Cross Polar Discrimination at Boresight db > 23 > 23 > 20 Cross Polar Discrimination over Sector db > 9.5 > 10.0 > 11.0 Vertical Pattern: Elevation Beamwidth 10.1 ± ± ± 0.4 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.5 < 0.5 < 0.6 First Upper Side Lobe Suppression db > 16 > 18 > 16 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 16 > 18 > 16 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (R1 // Y1) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Max. Effective Power Ports R1 W 800 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 56 For more information about additional mounting accessories please refer to page 85

57 4-Port Antenna V01 Highband Y1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 18.1 ± ± ± ± ± 0.3 Horizontal Pattern: Azimuth Beamwidth 64 ± ± ± ± ± 3.4 Front-to-Back Ratio, Total Power, ± 30 db > 25 > 26 > 27 > 26 > 25 Cross Polar Discrimination at Boresight db > 14 > 19 > 20 > 18 > 20 Cross Polar Discrimination over Sector db > 8.0 > 9.5 > 10.0 > 10.0 > 11.5 Vertical Pattern: Elevation Beamwidth 5.0 ± ± ± ± ± 0.2 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.2 < 0.2 < 0.3 < 0.2 < 0.3 First Upper Side Lobe Suppression db > 17 > 18 > 19 > 20 > 20 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 15 > 16 > 16 > 15 > 17 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (R1 // Y1) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Max. Effective Power Ports Y1 W 400 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 30 Passive Intermodulation dbc < 150 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 900 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 4 x 7-16 female long neck bottom 2x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb / 300 / / 11.8 / 6.0 M (Medium) 24.0 / 26.2 (clamps incl.) 52.9 / 57.8 (clamps incl.) 2316 / 322 / / 12.7 / 7.5 Panel and 2 units of clamps for diameter MHz For more information about additional mounting accessories please refer to page 85 57

58 4-Port Antenna Frequency Range HPBW R Y Port Antenna LB/HB 2.6m dBi dBi Type No V01 Lowband R1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 16.0 ± ± ± ± 0.2 Horizontal Pattern: Azimuth Beamwidth 71 ± ± ± ± 1.5 Front-to-Back Ratio, Total Power, ± 30 db > 22 > 24 > 26 > 27 Cross Polar Discrimination at Boresight db > 23 > 22 > 22 > 21 Cross Polar Discrimination over Sector db > 8.0 > 8.5 > 9.5 > 8.5 Vertical Pattern: Elevation Beamwidth 8.4 ± ± ± ± 0.3 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.3 < 0.3 < 0.3 < 0.3 First Upper Side Lobe Suppression db > 16 > 17 > 16 > 15 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 16 > 17 > 16 > 15 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (R1 // Y1) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Max. Effective Power Ports R1 W 800 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 58 For more information about additional mounting accessories please refer to page 85

59 4-Port Antenna V01 Highband Y1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 18.0 ± ± ± ± ± 0.4 Horizontal Pattern: Azimuth Beamwidth 64 ± ± ± ± ± 2.0 Front-to-Back Ratio, Total Power, ± 30 db > 25 > 26 > 27 > 25 > 26 Cross Polar Discrimination at Boresight db > 15 > 18 > 20 > 16 > 21 Cross Polar Discrimination over Sector db > 8.0 > 11.0 > 11.0 > 10.0 > 9.5 Vertical Pattern: Elevation Beamwidth 5.0 ± ± ± ± ± 0.2 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 First Upper Side Lobe Suppression db > 19 > 18 > 20 > 20 > 18 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 16 > 16 > 16 > 16 > 17 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (R1 // Y1) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Max. Effective Power Ports Y1 W 400 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 30 Passive Intermodulation dbc < 150 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 900 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 4 x 7-16 female long neck bottom 2x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb / 300 / / 11.8 / 6.0 H (Heavy) 29.0 / 31.2 (clamps incl.) 63.9 / 68.8 (clamps incl.) 2951 / 322 / / 12.7 / 7.5 Panel and 2 units of clamps for diameter MHz For more information about additional mounting accessories please refer to page 85 59

60 4-Port Antenna Frequency Range HPBW Y Y Port Antenna 2HB 1.5m 2x dBi ESLS Type No Left side, highband Y1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 17.3 ± ± ± ± 0.4 Horizontal Pattern: Azimuth Beamwidth 66 ± ± ± ± 2.6 Front-to-Back Ratio, Total Power, ± 30 db > 24 > 24 > 26 > 23 Cross Polar Discrimination at Boresight db > 22 > 22 > 22 > 18 Cross Polar Discrimination over Sector db > 12.5 > 10.0 > 9.5 > 13.0 Vertical Pattern: Elevation Beamwidth 6.8 ± ± ± ± 0.3 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.3 < 0.3 < 0.2 < 0.2 First Upper Side Lobe Suppression db > 20 > 20 > 20 > 20 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 17 > 17 > 16 > 16 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (Y1 // Y2) Max. Effective Power per Port W 250 (at 50 C ambient temperature) Max. Effective Power Ports Y1 W 500 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 60 For more information about additional mounting accessories please refer to page 85

61 4-Port Antenna Right side, highband Y2, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 17.1 ± ± ± ± 0.5 Horizontal Pattern: Azimuth Beamwidth 68 ± ± ± ± 2.0 Front-to-Back Ratio, Total Power, ± 30 db > 25 > 26 > 25 > 23 Cross Polar Discrimination at Boresight db > 22 > 22 > 22 > 19 Cross Polar Discrimination over Sector db > 13.5 > 11.0 > 9.5 > 12.0 Vertical Pattern: Elevation Beamwidth 6.8 ± ± ± ± 0.2 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.3 < 0.3 < 0.2 < 0.2 First Upper Side Lobe Suppression db > 19 > 19 > 20 > 20 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 18 > 17 > 17 > 15 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (Y2 // Y1) Max. Effective Power per Port W 250 (at 50 C ambient temperature) Max. Effective Power Ports Y2 W 500 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 30 Passive Intermodulation dbc < 153 (2 x 43 dbm carrier) Polarization 45, +45 Max. Effective Power 700 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 4 x female bottom 2x, Position bottom continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb / 275 / / 10.8 / 3.4 M (Medium) 13.0 / 15.2 (clamps incl.) 28.7 / 33.5 (clamps incl.) 1791 / 298 / / 11.7 / 4.7 Panel and 2 units of clamps for diameter MHz For more information about additional mounting accessories please refer to page 85 61

62 6-Port Antenna Frequency Range HPBW R1 Y1 Y Port Antenna LB/2HB 1.4m dBi 2x dBi Type No Left side, lowband R1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 13.5 ± ± ± ± 0.3 Horizontal Pattern: Azimuth Beamwidth 72 ± ± ± ± 2.2 Front-to-Back Ratio, Total Power, ± 30 db > 22 > 24 > 24 > 25 Cross Polar Discrimination at Boresight db > 23 > 23 > 24 > 22 Cross Polar Discrimination over Sector db > 7.0 > 7.0 > 7.0 > 7.5 Azimuth Beam Port-to-Port Tracking db < 2.0 < 1.5 < 2.0 < 2.5 Vertical Pattern: Elevation Beamwidth 17.4 ± ± ± ± 0.8 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.6 < 0.8 < 0.6 < 0.5 First Upper Side Lobe Suppression db > 15 > 16 > 16 > 19 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 22 > 20 > 20 > 20 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (R1 // Y1, Y2) Max. Effective Power per Port W 300 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Left side, highband Y1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 17.2 ± ± ± ± ± 0.6 Horizontal Pattern: Azimuth Beamwidth 62 ± ± ± ± ± 5.8 Front-to-Back Ratio, Total Power, ± 30 db > 24 > 28 > 26 > 24 > 24 Cross Polar Discrimination at Boresight db > 16 > 20 > 23 > 18 > 15 Cross Polar Discrimination over Sector db > 7.0 > 9.0 > 10.5 > 8.5 > 9.5 Azimuth Beam Port-to-Port Tracking db < 1.5 < 2.5 < 2.5 < 2.0 < 2.0 Vertical Pattern: Elevation Beamwidth 6.7 ± ± ± ± ± 0.3 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.3 < 0.2 < 0.2 < 0.2 < 0.2 First Upper Side Lobe Suppression db > 17 > 17 > 18 > 19 > 15 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 14 > 14 > 14 > 14 > 14 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (Y1 // R1, Y2) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 62 For more information about additional mounting accessories please refer to page 85

63 6-Port Antenna Right side, highband Y2, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 17.2 ± ± ± ± ± 0.4 Horizontal Pattern: Azimuth Beamwidth 65 ± ± ± ± ± 2.5 Front-to-Back Ratio, Total Power, ± 30 db > 24 > 23 > 23 > 24 > 25 Cross Polar Discrimination at Boresight db > 22 > 24 > 24 > 20 > 18 Cross Polar Discrimination over Sector db > 15.5 > 15.0 > 13.0 > 7.5 > 9.5 Azimuth Beam Port-to-Port Tracking db < 1.0 < 1.0 < 1.0 < 1.5 < 2.0 Vertical Pattern: Elevation Beamwidth 7.1 ± ± ± ± ± 0.3 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.2 < 0.2 < 0.2 < 0.3 < 0.2 First Upper Side Lobe Suppression db > 21 > 21 > 22 > 18 > 19 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 14 > 15 > 15 > 15 > 16 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (Y2 // R1, Y1) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 30 Passive Intermodulation dbc < 150 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 900 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 6 x 7-16 female bottom FlexRET, continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb / 377 / / 14.8 / 6.7 H (Heavy) 25.0 / 27.2 (clamps incl.) 55.1 / 59.9 (clamps incl.) 1602 / 397 / / 15.6 / 8.3 Panel, FlexRET and 2 units of clamps for diameter MHz For more information about additional mounting accessories please refer to page 85 63

64 6-Port Antenna Frequency Range HPBW R1 Y1 Y Port Antenna LB/2HB 1.9m dBi 2x dBi Type No Left side, lowband R1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 15.2 ± ± ± ± 0.3 Horizontal Pattern: Azimuth Beamwidth 69 ± ± ± ± 1.4 Front-to-Back Ratio, Total Power, ± 30 db > 23 > 25 > 26 > 26 Cross Polar Discrimination at Boresight db > 23 > 22 > 23 > 22 Cross Polar Discrimination over Sector db > 8.0 > 8.0 > 9.0 > 8.0 Azimuth Beam Port-to-Port Tracking db < 2.0 < 2.0 < 2.0 < 2.0 Vertical Pattern: Elevation Beamwidth 10.8 ± ± ± ± 0.4 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.5 < 0.5 < 0.4 < 0.5 First Upper Side Lobe Suppression db > 14 > 16 > 16 > 15 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 15 > 16 > 17 > 16 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (R1 // Y1,Y2) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Left side, highband Y1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 17.2 ± ± ± ± ± 0.6 Horizontal Pattern: Azimuth Beamwidth 65 ± ± ± ± ± 6.8 Front-to-Back Ratio, Total Power, ± 30 db > 26 > 27 > 26 > 23 > 23 Cross Polar Discrimination at Boresight db > 16 > 20 > 24 > 18 > 15 Cross Polar Discrimination over Sector db > 7.5 > 8.5 > 10.5 > 8.5 > 9.0 Azimuth Beam Port-to-Port Tracking db < 2.5 < 2.5 < 2.0 < 2.5 < 2.0 Vertical Pattern: Elevation Beamwidth 6.3 ± ± ± ± ± 0.3 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.2 < 0.2 < 0.2 < 0.1 < 0.1 First Upper Side Lobe Suppression db > 19 > 17 > 17 > 16 > 16 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 14 > 14 > 13 > 13 > 14 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (Y1 // R1, Y2) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 64 For more information about additional mounting accessories please refer to page 85

65 6-Port Antenna Right side, highband Y2, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 17.3 ± ± ± ± ± 0.6 Horizontal Pattern: Azimuth Beamwidth 65 ± ± ± ± ± 4.8 Front-to-Back Ratio, Total Power, ± 30 db > 22 > 24 > 24 > 25 > 26 Cross Polar Discrimination at Boresight db > 15 > 19 > 18 > 17 > 19 Cross Polar Discrimination over Sector db > 10.5 > 15.0 > 14.5 > 10.0 > 10.0 Azimuth Beam Port-to-Port Tracking db < 1.0 < 1.0 < 1.0 < 0.5 < 2.5 Vertical Pattern: Elevation Beamwidth 7.1 ± ± ± ± ± 0.3 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.3 < 0.3 < 0.3 < 0.3 < 0.3 First Upper Side Lobe Suppression db > 19 > 25 > 25 > 19 > 21 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 13 > 15 > 17 > 17 > 15 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (Y2 // R1, Y1) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 30 Passive Intermodulation dbc < 150 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 900 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 6 x 7-16 female bottom FlexRET, continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb / 377 / / 14.8 / 6.7 H (Heavy) 30.0 / 32.2 (clamps incl.) 66.1 / 70.9 (clamps incl.) 2121 / 397 / / 15.6 / 8.3 Panel, FlexRET and 2 units of clamps for diameter MHz For more information about additional mounting accessories please refer to page 85 65

66 6-Port Antenna Frequency Range HPBW R1 Y1 Y Port Antenna LB/2HB 2.4m dBi 2x dBi Type No Left side, lowband R1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 16.2 ± ± ± ± 0.2 Horizontal Pattern: Azimuth Beamwidth 67 ± ± ± ± 1.3 Front-to-Back Ratio, Total Power, ± 30 db > 21 > 24 > 26 > 27 Cross Polar Discrimination at Boresight db > 24 > 25 > 25 > 26 Cross Polar Discrimination over Sector db > 6.5 > 7.0 > 9.0 > 10.0 Azimuth Beam Port-to-Port Tracking db < 2.0 < 2.5 < 2.0 < 2.0 Vertical Pattern: Elevation Beamwidth 8.7 ± ± ± ± 0.4 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.3 < 0.4 < 0.4 < 0.4 First Upper Side Lobe Suppression db > 17 > 17 > 17 > 18 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 16 > 15 > 15 > 16 Cross Polar Isolation db > 30 Port to Port Isolation db > 30 (R1 // Y1,Y2) Max. Effective Power per Port W 400 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Left side, highband Y1, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 17.3 ± ± ± ± ± 0.7 Horizontal Pattern: Azimuth Beamwidth 65 ± ± ± ± ± 6.4 Front-to-Back Ratio, Total Power, ± 30 db > 25 > 25 > 25 > 24 > 23 Cross Polar Discrimination at Boresight db > 16 > 22 > 24 > 19 > 16 Cross Polar Discrimination over Sector db > 8.5 > 10.5 > 11.0 > 8.5 > 7.5 Azimuth Beam Port-to-Port Tracking db < 1.5 < 2.5 < 2.0 < 1.5 < 2.5 Vertical Pattern: Elevation Beamwidth 6.3 ± ± ± ± ± 0.3 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.5 < 0.4 < 0.4 < 0.3 < 0.3 First Upper Side Lobe Suppression db > 19 > 18 > 17 > 16 > 18 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 13 > 14 > 13 > 14 > 15 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (Y1 // R1, Y2) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 66 For more information about additional mounting accessories please refer to page 85

67 6-Port Antenna Right side, highband Y2, connector Frequency Range MHz Gain at mid Tilt dbi Gain over all Tilts dbi 17.4 ± ± ± ± ± 0.5 Horizontal Pattern: Azimuth Beamwidth 62 ± ± ± ± ± 3.6 Front-to-Back Ratio, Total Power, ± 30 db > 24 > 25 > 25 > 25 > 23 Cross Polar Discrimination at Boresight db > 22 > 23 > 21 > 16 > 16 Cross Polar Discrimination over Sector db > 16.0 > 16.0 > 13.0 > 8.0 > 7.5 Azimuth Beam Port-to-Port Tracking db < 1.5 < 1.0 < 1.0 < 1.5 < 2.0 Vertical Pattern: Elevation Beamwidth 7.1 ± ± ± ± ± 0.3 Electrical Downtilt continuously adjustable Tilt Accuracy < 0.2 < 0.3 < 0.3 < 0.4 < 0.2 First Upper Side Lobe Suppression db > 21 > 24 > 23 > 19 > 23 Upper Side Lobe Suppression, 20 Sector above Main Beam db > 14 > 15 > 15 > 15 > 17 Cross Polar Isolation db > 28 Port to Port Isolation db > 30 (Y2 // R1, Y1) Max. Effective Power per Port W 200 (at 50 C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Electrical specifications, all systems Impedance Ω 50 VSWR < 1.5 Return Loss db > 14 Interband Isolation db > 30 Passive Intermodulation dbc < 150 (2 x 43 dbm carrier) Polarization +45, 45 Max. Effective Power 900 (at 50 C ambient for the Antenna W temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifications Connector Position Adjustment Mechanism 6 x 7-16 female bottom FlexRET, continuously adjustable Wind load (at Rated N lbf Frontal: Wind Speed: 150 km/h) Maximal: Max. Wind Velocity Height / Width / Depth Category of Mounting Hardware Weight Packing Size Scope of Supply km/h mph kg lb / 377 / / 14.8 / 6.7 H (Heavy) 35.0 / 37.2 (clamps incl.) 77.1 / 81.9 (clamps incl.) 2641 / 397 / / 15.6 / 8.3 Panel, FlexRET and 2 units of clamps for diameter MHz For more information about additional mounting accessories please refer to page 85 67

68 4-Port Micro Cell Antenna Dual Polarization HPBW X X Port Micro Cell Antenna 2HB 0.5m 85 2x dBi Type No Use case Flexible Indoor Coverage Flexible Street Level Micro Cell Coverage Not for Macro Site Installation Pole and wall mounting Electrical data Per sector Frequency range MHz Polarization +45, 45 Gain dbi 7.5 Horizontal Pattern: Half-power beam width 85 Cross polar ratio 0 60 db 18 typ. 8 typ. Vertical Pattern: Half-power beam width 80 Electrical tilt (upright installation) 0, fixed Impedance Ω 50 Ω VSWR MHz: < MHz: < MHz: < 1.6 Isolation, between all db 25 (Intra- / Intersystem) ports Intermodulation IM3 dbc < 153 (2 x 43 dbm carrier) Max. power per input W 50 (at 50 C ambient temperature) Antenna in upright pole installation Connectors (4.3-10) covered by end cap Top view / connector view Mechanical specifications Adjustment mechanism Tilt adjustment mechanism (installation at right angle) Azimuth adjustment mechanism (upright installation) IP Protection class Wind load (at 150 km/h) Max. wind velocity Feeder cables Allowed diameter of mounting pole N lbf km/h mph Max. distance wall/pole when mounted Height / diameter 4 x female (2 x top, 2 x bottom, covered by end cap) Two continuously rotatable antenna modules (radiator and reflector) within the radome (set by hand) Set by hand Continuously for each sector (0 360 ) Set by hand Continuously for each sector (0 360 ) IP Max. ¼ High Flex (bending radius ) push pull and handscrew type, angular connector required / / 3.9 Category of mounting hardware L (Light) Weight kg 2.0 lb 4.4 Packing size 547 / 242 / / 9.5 /

69 Omni Slimpole Antenna Dual Polarization HPBW X Port Omni Slimpole dBi Type No Frequency range MHz Polarization +45, , , , 45 Gain dbi 2 x 5 2 x 5 2 x 5 2 x 5 Horizontal Pattern: Half-power beam width Omni Omni Omni Omni Deviation from db ±1 ±1 ±1.5 ±1.5 circularity Vertical Pattern: Half-power beam width Electrical tilt 0, fixed Impedance Ω 50 VSWR < 1.5 Isolation, db > 30 between ports Intermodulation IM3 dbc : < 150 (2 x 43 dbm carrier) Max. power per input W 100 (at 50 C ambient temperature) MHz Mechanical specifications Connector position Weight Wind load (at 150 km/h) Max. wind velocity Mechanical interface Packing size Height / diameter kg lb N lbf km/h mph 2 x N female Bottom Flange connection 8 x M6 at a graduated diameter of Evenness of the opposite surface: x 220 x x 8.7 x / /

70 1-Port Omni Antenna Vertical Polarization Indoor and outdoor use V 1-Port Omni Antenna HB 0.1m dBi Type No x N female Connector position Bottom or top Frequency range MHz VSWR < 1.8 Gain dbi 2 Impedance Ω 50 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Polarization Vertical Max. power W 50 (at 50 C ambient temperature) Weight g lb Radome diameter Height Fire load kwh Material: Mounting: Grounding: Radiator: Brass. Radome: Fiberglass, color: White. One hole mounting ( iches diameter) to surfaces of max thickness. All metal parts of the antenna and the mounting kit are DC grounded. The inner conductor is not DC grounded. 70

71 1-Port Omni Antenna Vertical Polarization Indoor and outdoor use / V 1-Port Omni Antenna LB/HB 0.2m / dBi Type No x N female Connector position Bottom or top Frequency range MHz / VSWR MHz < < < 2.5 Gain dbi 2 Impedance Ω 50 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Polarization Vertical Max. power W 50 (at 50 C ambient temperature) Weight Wind load (at 150 km/h) Radome diameter Height g lb N lbf Fire load kwh < Material: Mounting: Radiator: Brass. Radome: Fiberglass, colour: White. One hole mounting ( diameter) to surfaces of max thickness. 71

72 2-Port Indoor Antenna Dual Polarization HPBW Integrated Combiner X X C 2-Port Indoor Antenna LB/HB C 0.4m 80 / dBi dBi Type No Frequency range MHz Polarization +45, , 45 Gain dbi 7 8 Half-power beam width; hor., ver. typ. 80 typ. 65 Impedance Ω 50 VSWR MHz: MHz: 2.2 Isolation, between ports db MHz: MHz: MHz: 20 Max. power per port W 20 (at 50 C ambient temperature) Passive Intermodulation PIM 3 dbc < 140 (at 2 x 40 dbm carrier) 2 x female Protection class IP 30 Weight kg lb Packing size 417 / 281 / / 11.1 / 5.6 Height/width/depth 399 / 237 / / 9.3 / 2.5 Operating C temperature range Fire protection classification UL 94-V2 Fire load kwh C C Material: Mounting: Available accessories: Reflector: Brass. Radome: ASA / PC, colour: White. Position: Wall and ceiling possible. The antenna is mounted with four screws ( nominal diameter, srew head dia meter max ). Screws are not supplied. After antenna mounting install the antenna cover. Broadband power splitters and tappers ( MHz) Antenna rearside with four drilling holes Antenna and antenna cover All dimensions in 72

73 2-Port Indoor MIMO Omni Antenna Vertical Polarization The antenna can be operated in all indicated frequency ranges simultaneously. V V 2-Port Indoor Omni Antenna dBi Type No Frequency range Port 1 and Port 2 MHz Port Port Polarization Dual Vertical Gain, typ. dbi 2 Gain, max. dbi MHz: MHz: MHz: MHz: MHz: Impedance Ω 50 VSWR MHz: < MHz: < MHz: < MHz: < MHz: < 2.0 Isolation db MHz: > MHz: > MHz: > MHz: > MHz: > 20 Intermodulation IM3 (2 x 40 dbm carrier) dbc MHz: < MHz: < MHz: < MHz: < MHz: not relevant Max. power per input (at 50 C ambient temperature) Max. effektive power for the antenna W MHz: MHz: MHz: MHz: MHz: 5 W 20 (at 50 C ambient temperature) 2 x female (angular connector required) Protection class IP 30 Weight g 950 lb 2.1 Packing size Diameter (antenna module) Height (antenna module) 350 x 350 x x 13.8 x Fire load kwh 3.18 Material: Mounting: Reflector: Aluminum. Radome: ASA/PC blend, colour: White. Additional painting is possible. On-ceiling mounting: Mounting kit required Concealed antenna installation (ceiling thickness ): Mounting kit required Hidden antenna installation in double l ayer ceiling, floors or similar no additional mounting kit required Accessories (order separately if required) Type No. Description On-ceiling mounting kit Support ring for concealed antenna installation 73

74 74

75 Suary Splitters, Tappers, Dual-Band Combiners, Low Noise Amplifier Type Type No. Frequency range Remark Max. power Connector female Page Splitters 2-way Splitter MHz Indoor/Outdoor 300 W way Splitter MHz Indoor/Outdoor 300 W way Splitter MHz Indoor/Outdoor 300 W way Splitter MHz Indoor/Outdoor 700 W way Splitter K MHz Indoor/Outdoor 1000 W way Splitter K MHz Indoor/Outdoor 1000 W way Splitter MHz Indoor/Outdoor 100 W way Splitter MHz Indoor/Outdoor 100 W way Splitter MHz Indoor/Outdoor 100 W Tappers Continuously adjustable ratio Multi-band Tapper / / / dB MHz MHz MHz MHz Indoor/Outdoor 100 W Dual-Band Combiners Dual-Band Combiner (PMR, TETRA, TETRAPOL, CDMA 800, GSM 900, GSM 1800, UMTS, WLAN) More Combiners on request available MHz MHz Indoor/Outdoor 500 W Low Noise Amplifier GPS Low Noise Amplifier GPS MHz TNC N 84 Mechanical Accessories and Remote Electrical Tilt Product Line of Mounting Parts for Panel Antennas 85 Side-mounting Brackets for Omni Antennas Kathrein s Remote Electrical Tilt System (RET) New or changed product Accessories 75

76 Low-loss Power Splitters Multi-band Connector For indoor and outdoor use. 2-way Splitter way Splitter way Splitter Type No Connectors socket (50 Ω) Max. power (at 50 C 300 W ambient temperature) For connecting... antennas Frequency range MHz VSWR 1.25 (Port 1) 1.25 (Port 1) 1.35 (Port 1) Intermodulation IM3 155 dbc (2 x 20 W) typical: 160 dbc Impedance 50 Ω Insertion loss < 0.05 db Weight 964 g 1045 g 1134 g (without mounting kit) Dimensions (w x h x d) See drawings on following page Mounting: DC capability: Indoor use: No additional mounting material is necessary. Outdoor use: Mounting material is listed below (order separately). DC transmission between all terminations (suitable for remote power supply systems). Environmental conditions: ETS class 1.2 ETS class 2.3 ETS class 4.1 E Low temperature: 30 C High temperature (dry): +65 C IP Mounting material (order separately) Type Description Remarks Mounting kit clamp Mast: diameter

77 Low-loss Power Splitters Multi-band wallmast-mounting kit (Option) BN wallmast-mounting kit (Option) BN wallmast-mounting kit (Option) BN Accessories 77

78 Low-loss Power Splitters Multi-band For indoor and outdoor use. 2-way Splitter Type No Connector (female) 7-16 Max. power 700 W (at 50 C ambient temperature) For connecting... antennas 2 Frequency range MHz VSWR < 1.5 Intermodulation IM3 < 150 dbc (2 x 43 dbm carrier) Impedance 50 Ω Insertion loss < 0.05 db Weight 870 g Packing size 300 x 75 x 75 Material: Mounting: DC capability: Environmental conditions: Brass. Surface treatment: CuSnZn3 Bracket for wall mounting included in the scope of supply. For pipe mast mounting use clamps listed below (order separately). DC transmission between all terminations (suitable for remote power supply systems). ETS class 4.1 E Low temperature: 55 C High temperature (dry): +60 C IP SW input Clamps (order separately) Type Description Remarks clamp Mast: diameter clamp Mast: diameter clamp Mast: diameter clamp Mast: diameter clamp Mast: diameter

79 Power Splitters For indoor and outdoor use. 3-way Splitter way Splitter Type No. K K Connector (female) Max. power 1000 W (at 50 C ambient temperature) For connecting... antennas 3 4 Frequency range MHz VSWR < 1.1 Impedance 50 Ω Insertion loss < 0.05 db Max. size () [] 409 x 82 x 82 [16.1 x 3.2 x 3.2] Packing size () [] 425 x 93 x 107 [16.7 x 3.7 x 4.2] Material: Mounting: Case: Aluminum. Inner conductor: Brass. Bracket for wall mounting included in the scope of supply. For mounting to tubular masts use clamps as listed below (order separately). K Clamps (order separately) Type Description Remarks () [] clamps Mast diameter: [1. 2.2] clamps Mast diameter: [ ] clamps Mast diameter: [2.9.7] clamps Mast diameter: [ ] clamps Mast diameter: [ ] Accessories 79

80 Low-loss Power Splitters Multi-band For indoor and outdoor use. 2-way Splitter way Splitter way Splitter Type No Frequency range MHz For connecting... antennas Insertion loss db < 0.05 Impedance Ω 50 VSWR MHz MHz MHz < 1.3 < 1.3 < 1.5 < 1.3 < 1.4 < 1.5 Intermodulation IM3 dbc < 150 (2 x 43 dbm carrier) Max. power W 100 (at 50 C ambient temperature) Connector female Weight Profile cross-section Packing size Max. size kg lb x x x 73 x x 2.9 x / 66 / / 2.6 / 1.8 < 1.3 < 1.3 < Material: DC capability: Housing: Aluminum. Inner conductor: Brass. DC transmission between all terminations (suitbale for remote power supply systems). Environmental conditions: IP

81 Multi-band Low-loss Power Tapper / / / Continuously Adjustable Splitting Ratio 5.0 db 20.0 db For indoor and outdoor use. 2-way Tapper / / / Type No P 1 Frequency range MHz Power ratio between outputs (P 2 / P 1) db 5 to 20 continuously adjustable For connecting... antennas 2 Insertion loss db MHz: < MHz: < MHz: < MHz: < 0.7 Impedance Ω 50 VSWR MHz: < MHz: < MHz: < MHz: < 1.7 Intermodulation IM3 dbc MHz: < 150 ( 2 x 43 dbm carrier) MHz: < 150 ( 2 x 43 dbm carrier) MHz: < 150 ( 2 x 43 dbm carrier) MHz: not relevant Max. power W 100 (at 50 C ambient temperature) Connector female Power ratio adjustment mechanism Power ratio scale (P 2 /P 1 ) P 2 Weight kg lb Environmental conditions Indoor, outdoor use Protection class IP 65 Blocking unit Profile diameter Packing size x 80 x x 5.0 x Max. size (including connectors) 160 / 63 / / 2.5 / 2.0 Material: Housing: Aluminum. Inner conductor: Brass. DC capability: DC transmission only between input and port P 1. Splitting table (typical values) P 2 / P 1 [db] Splitting ratio P 1 / P 2 Splitting attenuation P 1 / P [db] P 2 / P [db] Accessories 81

82 Dual-Band Combiner MHz PMR / TETRA / TETRAPOL MHz CDMA 800 / GSM 900 / GSM 1800 / UMTS / WLAN Designed for co-siting purposes Enables feeder sharing Can be used as a combiner near the BTS or in a reciprocal function near the antenna Suitable for indoor or outdoor applications Wall or mast mounting External DC stop available as an accessory Very low insertion loss High input power Port 1 Port 2 Port 3 Port 3 Port Port Technical Data Type No Pass band Band 1 Band 2 Insertion loss Port 1 Port 3 Port 2 Port 3 Isolation Port 1 Port 2 VSWR Impedance power Band 1 / Band MHz MHz < 0.15 db ( MHz) < 0.15 db ( MHz) > 50 db ( / MHz) < 1.25 ( / / MHz) 50 Ω < 500 W / < 500 W Intermodulation products < 160 dbc (3 rd order; with 2 x 20 W) Temperature range C Connectors 7-16 female (long neck) Application Indoor or outdoor (IP 66) DC/AISG transparency Port 1 Port 3 Port 2 Port 3 Mounting Weight Packing size Dimensions (w x h x d) By-pass (max ma) Stop Wall mounting: With 4 screws (max. 8 diameter) / Mast mounting: With additional clamp set 4.0 kg 210 x 150 x x 64 x (including mounting brackets) 82

83 Dual-Band Combiner MHz PMR / TETRA / TETRAPOL MHz CDMA 800 / GSM 900 / GSM 1800 / UMTS / WLAN Attenuation/dB Diagram II Port 1 Port 3 Port 2 Port Frequency/MHz Attenuation/dB Diagram II Port 1 Port 3 Port 2 Port Frequency/MHz Port 1 Port 2 Port 3 Á Accessories (order separately) Type No. Clamp set suitable for mast diameter of Type No. Description V01 DC stop Ohm load Clamp Set DC Stop 50-Ohm load Accessories 83

84 Low Noise Amplifier GPS The low noise amplifier is designed for the use inside vehicles with train antennas with GPS. It includes a preselection filter to prevent the inter ference in case of simultaneous operation at the frequency range / MHz and GPS. The product fulfils the requirements according to EN Block Diagram lowpass bandpass filter GPS amplifier bandpass filter GPS amplifier bandpass filter GPS bias-t TCN female Output N female Type No Frequency MHz , L1-signal Gain db 25 ±2 Noise figure db < 2.0 VSWR (input, output) < 1.8 Operation voltage V , ripple < 50 mv, supplied at inner conductor RF-output Operation current ma 25 Connector input TNC female Connector output N female Dimensions (w x h x l) Mounting 70 x 22 x x 0.9 x holes, 4.5 diameter 4 holes, 0.2 diameter 1) ) ) (Antenna) TNC 1) Additional features: The maximum input power at the input of the amplifier at the frequency range MHz and MHz is limited to +25 dbm. The noise level at the GPS-frequency generated by the operation at the frequency range MHz and MHz should not exceed the thermal noise level at the input of the GPS Amplifier, otherwise the noise figure will be increased ) 3) Environmental conditions: Temperature range: 25 C +55 C (data as specified) 40 C +85 C (extended range) *) Please note: It is necessary to use four fixing screws to mount the LNA in case the installation height is more than 2 m. The system operator (receiver) needs to secure a current limit of < 1000 ma. EU-RED: Hereby, KATHREIN SE declares that the radio equipment type is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: *) Extended range of operation: Within an extended temperature range of 40 C +85 C and an extended supplied voltage range of 3.0 V 6.0 V operation is possible with the following restrictions: Noise figure: < 2.5 db Gain: > 20 db N Output (DC V) bottom top ceiling Hanging installation position All dimensions in 84

85 Product Line of Mounting Parts Type Windload Classification Pole Diameter in Type No. Remark Clamp light / medium light / medium / heavy light / medium / heavy Clamp XM (X-medium) XH (X-heavy) Downtilt kit XH (X-heavy) XH (X-heavy) light light / medium heavy Downtilt kit XM (X-medium) XH (X-heavy) Azimuth Adjustment Kit light / medium heavy Pole mounting adjustment angle ±30 (additional clamp needed) Azimuth Adjustment Kit light / medium Wall mounting adjustment angle ±30 Azimuth Adjustment Kit X-heavy Sector Clamp light / medium sector clamp heavy X-heavy Offset light / medium Mounting support clamp Clearance between heavy pole and antenna (additional clamp X-heavy needed) 2x Panel Mounting Kit Tension Band max. Panel width light / medium max. Panel width 325 heavy X-heavy light max. Panel width G F New or changed product Additional clamp needed Please note: Only usable without downtilt kit Accessories 85

86 Side-mounting Clamp Omnidirectional Antennas Large Pipe Type No For masts of diameter Antenna Mast b a b a 86

87 db db db Side-mounting Bracket Omnidirectional Antennas Type No Side-mounted bracket (for mast diameters of ) D Type No Fits for antenna type no. 800/900 MHz A Side-mounting is possible for four fixed distances between the tubular mast and the antenna: 800/900 MHz (holes 1 and 3) UMTS (hole 2) A = 100 = 0.3 λ A = 160 = 0.5 λ A = 240 = 0.75 λ A = 80 = 0.5 λ A A A A Bracket Antenna Antenna base Mast Bracket Hole 3 Hole 1 Hole 3 Hole 2 D D D D Pipe D Horizonal Radiation Pattern Spacing A Curve Pipe D Horizonal Radiation Pattern Spacing A Curve Pipe D Curve Horizonal Radiation Pattern Spacing A direction from mast to antenna direction from mast to antenna direction from mast to antenna Accessories 87

88 Kathrein s Remote Electrical Tilt System Functionality of Different RET Technologies RCU with RFID Feature External RCU V01 includes a RFID reader Antenna spindles are equipped with RFID tags The antenna specific data is stored on this tag: a Type number a Serial number a Configuration File With power on, the data is read out automatically from the tag by the RCU List of all updated antennas on our homepage: FlexRET Integrated RET module inside the antenna ( V01) Pre-configured with the antenna specific parameters: a Type number a Serial number a Configuration file Calibrated ex-factory The FlexRET module is exchangeable a Automatic data transfer in case of exchange with internal RFID tag a Only calibration is neccessary Daisy chain possibility with FlexRET antennas and / or external RCUs Same module for all antennas SingleRET or MultiRET selection possible Array allocation possible with special Site Sharing Adapter or Gender Adapter / Port Extender Site Sharing Adapter Needed whenever the AISG control of a FlexRET antenna shall be performed by a higher number of base stations (BTS) 2 different realizations available a 3-way Site Sharing Adapter: Type no FlexRET control with up to 3 BTS a 6-way Site Sharing Adapter: Type no FlexRET control with up to 6 BTS Daisy chaining of up to 3 FlexRET antennas Additional ALDs can be mounted prior to the Site Sharing Adapter Flexible allocation of antenna arrays to the different BTS units using a special software application via PC Each BTS can act independently Individual password protection of configuration possible Configuration can be sent to the Site Sharing Adapter with every AISG control device (BTS or e.g. Kathrein ALC) BTS or Operator A BTS or Operator B 3 x AISG in 1 x FlexRET out BTS or Operator C 88

89 MOBILE COMMUNICATION Kathrein s Remote Electrical Tilt System Functionality of Different RET Technologies Gender Adapter ( ) Can be used if 2 base stations (BTS) are interconnected to one coon FlexRET antenna Mounted on the FlexRET output of the module Converts the AISG output to an AISG input The allocation of the antenna arrays can easily be performed during the coissioning process via the BTS Port Extender ( ) Can be used if 2 BTS are interconnected to coon FlexRET antennas in daisy chain Mounted on the FlexRET module by 2 screws Converts 1 FlexRET input and output to 2 FlexRET inputs and outputs Daisy chaining with further FlexRET antennas and / or external RCUs The allocation of the antenna arrays can easily be performed during the coissioning process via the BTS Manuals for all our AISG control devices and for the Site Sharing Adapter as well as the corresponding software downloads can be found on our homepage in the section Technical Documents respectively Driver and Software. For details of the RET system please also see Kathrein s RET brochure. Remote Electrical Tilt System Overview of Products, Installation, Control Possibilities and FAQs Kathrein s overall RET system works in accordance with the AISG (Antenna Interface Standards Group) standard and 3GPP (3rd Generation Part ner ship Project). 89 Accessories