4000 Series mounted closers

Transcription

1 4000 mouted closers APPLICATIONS For alumium, hollow metal, or wood swigig doors ad frames. Ca be used with hige or pivot mouted door. Adapter plates ad other istallatio accessories available for uusual coditios. FEATURES COMMON TO 4000 SERIES Each closer (except 4050, 4050T, 4040XP, 4040XPT, 4030, 4030T) is desiged for a specific moutig; hige side, top jamb, or parallel arm. 4040XP closer with regular or hold-ope arm mouts hige side or top jamb. 4030, 4040XP ad 4050 regular parallel arm closers iclude 62PA SHOE required to parallel arm mout either regular or hold-ope arm. Haded for right or left swigig doors, except for 4000T, 4030, 4030T, 4040XP, 4050, 4050T ad 4040XPT. Closers to meet ADA reduced opeig force requiremets except 4000T. Adjustable hydraulic backcheck cushios opeig swig prior to 90. Separate regulatio of geeral closig speed ad latchig speed. Joits i regular arm ad shoe adapt to ueve trim. Reversible shoe to boost latchig power o double lever arms. Available i a wide rage of stadard or optioal custom powder coat fiishes to bled with door ad frame. Plated fiishes available to accet door ad frame. Not desiged for exterior moutig or exposed to elemets. DESIGN ASSISTANCE LCN has bee providig reliable solutios to uique door cotrol problems sice Desig ad specificatio assistace are oly a phoe call away. Cotact LCN for assistace or techical iformatio at or FAX (Order Etry), Fax for Product Support. WARRANTY 30 year limited warraty; 25 year limited warraty (4050). See Geeral Iformatio Sectio for complete warraty details. SPECIFICATIONS Refer to SPECIFICATIONS sectio for suggested architectural specificatios. MATERIALS High stregth cast iro or cast alumium (4050) cylider. Forged steel mai arms. Oe piece forged steel pisto. Double heat treated piio. LCN s all weather Liquid X fluid performs to temperature rages from 120 F (49 C) to -30 F (-35 C) without ay seasoal adjustmet. LCN's stadard all weather fluid performs to temperature rages from 120 F (49 C) to -30 F (-35 C).. High efficiecy, full complemet, low frictio bearigs. Tamper resistat regulatig screws. Full rack ad piio hydraulic actio. Quiet, low frictio track ad roller combiatio for all sigle lever arm (track style) closers. FINISHES Available i six stadard or optioal custom powder coat fiishes to bled with door ad frame. LCN s powder coat fiishes surpass 100 hours of salt spray which is over four times the ANSI stadard for corrosio resistace. For istallatios where a higher level of corrosive resistace is required, LCN offers a optioal special rust ihibitig (SRI) pretreatmet. Closers that combie the exclusive LCN powder coat fiish ad the SRI pre-treatmet exceed the ANSI stadard for corrosio resistace eve further. Plated fiishes are available as a optio to accet door ad frame. (SRI ot available with plated fiishes). LISTINGS & APPROVALS UL listed for self-closig doors without hold-ope uder SWINGING DOOR CLOSERS (GVEV) file R1943. Tested ad certified uder ANSI Stadard A156.4 Grade Oe. Cosult factory for details. Cosult factory for other listigs such as; cul, Califoria State Fire Marshal, Bureau of Stadards ad Appeals. POSITIVE PRESSURE LCN closers have bee certified for three hours by UL to be i compliace with UL 10C. Cotact LCN for specific details o door closer fire ratigs. FASTENERS 4010, 4010T, 4020, 4020T, 4040XP, 4040XPT, 4050, 4050T, 4110, 4110T closers are shipped with: A stadard SELF-REAMING ad TAPPING SCREW (SRT) pack that cotais Philips head SRT screws to istall the closer. 4000T series closers are shipped with: A stadard WOOD ad MACHINE SCREW (WMS) pack that cotais Philips head wood ad machie screws to istall the closer. 4030, 4030T series closers are shipped with: A stadard WOOD ad SELF-TAPPING MACHINE SCREW (WMS) pack that cotais Phillips head wood ad self-tappig machie screws to istall the closer.stadard LCN thru bolts (TB) ca be istalled o 1-3/4 (44 mm) thick doors with 1/4-20 machie screws. Optioal thru bolt (TB) sizes are available for 1-5/8 (41 mm) or 1-3/8 (35 mm) door thickess, but this must be specified whe orderig. Drill 25/64 for steel doors or Drill 3/8 for wood doors Notes: 1. For Thru Bolts, specify door thickess if other tha 1-3/4 (44mm), represeted i diagram as dimesio "X". 2. Phillips head, metric machie screws are available, please specify. 3. LCN recommeds the use of wood screws, available i optioal WMS screw packs, for wood door applicatios. MAINTENANCE Closers mouted accordig to LCN istallatio istructios require o periodic maiteace or adjustmets. 2 LCN Door Cotrol Catalog

2 Features The 4040XPT is LCN s most flexible heavy duty track closer desiged specifically for iterior doors i istitutioal ad other rugged high traffic applicatios. Certificatios Body Costructio Fluid Hadig Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy America Act Cast Iro Body Full Complemet Bearigs 1-1/2 Diameter Pisto 3/4 Diameter Double Heat Treated Piio Joural All Weather Liquid X Fluid No-Haded Size Adjustable Sprig Size 1-4 Warraty 30 years Cover Fasteers Moutig Arms Fiishes/Colors/ Powder Coat Plastic, Stadard Metal, Optioal Self Reamig ad Tappig Screws (SRT) Pull side o door, pull side top jamb, push side o door Stadard Arm ad Track with Roller Alumium (689) Statuary Broze (690) Light Broze (691) Black (693) Dark Broze (695) Brass (696) Custom colors optioal Optioal SRI primer - powder coat oly Optioal plated fiishes Special Templates Customized istallatio templates or products may be available to solve uusual applicatios. Cotact LCN Product Support for assistace. HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING PARALLEL ARM STOP FACE POWDER COAT PLATED FINISH PLASTIC METAL COVER NON-HANDED NON-SIZED ACCESSIBILITY CYLINDER DELAYED ACTION AVB 110 *ARM FUNCTION REGULAR (DOUBLE) 120 STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS 95 AVAILABLE NOT AVAILABLE Closer available with less tha 5.0 lbs. opeig force o 36 door. * Maximum opeig/hold-ope poit with stadard template. LCN Door Cotrol Catalog 47

3 Moutig details Hige (Pull Side) Moutig 2" 51 mm 22-3/4" 578 mm 1-7/16" 37 mm 3-11/16" 94 mm 1-1/16" 27 mm 2-1/4" 57 mm 1-1/4" 32 mm 7/16" 11 mm 12-1/4" 311 mm 3-1/2" 89 mm 4040XPT-18 Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 120 Optioal track bumper assembly assists backcheck i cushioig the opeig swig of the door It is ot iteded to replace a auxiliary stop Reveal Top Rail Head Frame Clearace Maximum Opeig Should ot exceed 1/8 (3 mm) for stadard arm Less tha 3-3/4 (95 mm) requires PLATE, 4040XPT-18. Plate requires 1-13/16 (44 mm) miimum Requires 1-1/4 (32 mm) miimum 2-1/4 (57 mm) behid door required for 90 istallatio Templatig allows 120 with stadard arm, limited to 110 whe optioal bumper is istalled Hold-ope poits at 85, 90, 95, 100, 105, or 110, depedig o the clip locatio i track Notes: May track style door closers are capable of allowig 180 of door swig The majority of track style closers are at their weakest closig force i the rage Cosult factory for applicatios where door must swig LCN Door Cotrol Catalog

4 Moutig details Top Jamb (Pull Side) Moutig 4-3/8" 111 mm 12-1/4" 311 mm 3-1/2" 89 mm 4-1/16" 103 mm 1-1/16" 27 mm 2-1/4" 57 mm 1-1/4" 32 mm 2-5/8" 67 mm 22-3/4" 578 mm 4040XPT-18TJ Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 180 Optioal track bumper assembly assists backcheck i cushioig the opeig swig of the door It is ot iteded to replace a auxiliary stop Reveal Head Frame Clearace Maximum Opeig Should ot exceed 1/8 (3 mm) Less tha 3-7/8 (98 mm), requires PLATE, 4040XPT-18TJ. Plate requires 1-3/4 (44 mm) miimum 1-1/4 (32 mm) behid door required for 180 istallatio Templatig allows 180 with stadard track arm, limited to 110 with optioal bumper istalled Cosult factory if door will be held ope at 180 Hold-ope poits at 85, 90, 95, 100, 105 or 110 with hold-ope tracks Notes: May track style door closers are capable of allowig 180 of door swig The majority of track style closers are at their weakest closig force i the rage Cosult factory for applicatios where a exterior or large/heavy door must swig 180 LCN Door Cotrol Catalog 49

5 Moutig details Stop Face (Push Side) Moutig 4-5/8" 118 mm 22-3/4" 578 mm 3-1/2" 89 mm 5-1/4" 133 mm 1-1/16" 27 mm 2-1/4" 57 mm 1-1/4" 32 mm 2-7/16" 62 mm 12-1/4" 311 mm 5-1/4" 133 mm 4040XPT-18 Butt Higes Should ot exceed 5 (127 mm) i width Auxiliary Stop Recommeded at hold-ope poit or where a door caot swig 120 Optioal track bumper assembly assists backcheck i cushioig the opeig swig of the door It is ot iteded to replace a auxiliary stop Clearace Top Rail Stop Width Maximum Opeig Projects 2-1/4 (57 mm) from face of door Less tha 5-1/4 (133 mm) measured from the stop, requires PLATE, 4040XPT-18 Plate requires 3-1/2 (89 mm) miimum Miimum 1-1/4 (32 mm) Templatig allows 120 with stadard track arm, limited to 110 with optioal bumper tracks Hold-ope poits at 85, 90, 95, 100, 105 or 110 with hold-ope tracks Notes: May track style door closers are capable of allowig 180 of door swig The majority of track style closers are at their weakest closig force i the rage Cosult factory for applicatios where door must swig LCN Door Cotrol Catalog phoe: fax: rev. 5/16

6 Accessories Cylider Covers 4040XPT-3071 Cast Iro Cylider Assembly No-haded Stadard 4040XPT-72 Plastic Cover No-haded Sap-o Stadard 4040XPT-72MC Metal Cover Haded Required for plated fiishes ad custom powder coat fiishes Optioal Arms 4040XPT-3077T Stadard Arm No-haded Arm does ot iclude track roller 4040XPT-3077DE Double Egress Arm Haded For double egress doors ad frames Does ot iclude track roller Maximum reveal is 2-11/16 (68mm) Optioal Tracks 4040XPT-3038 Stadard Track 4040XPT-3038B Stadard Track with Bumper 4040XPT-3038H Hold-Ope Track 4040XPT-3038HB Hold-Ope Track with Bumper No-haded No-haded No-haded No-haded No hold-ope Will accept hold-ope clip ad/ or bumper assembly Stadard No hold-ope Will accept hold-ope clip Optioal With hold-ope clip istalled Will accept bumper assembly Optioal With hold-ope clip ad bumper assembly istalled Optioal LCN Door Cotrol Catalog 51

7 Accessories Istallatio Accessories 4040XPT-18 Plate 4040XPT-18TJ Plate 4040XPT-169 Track Bumper 4040XPT-3054 Hold-Ope Clip Required for pull side (door mout) istallatios where top rail is less tha 3-3/4 (95 mm) - Requires miimum 1-3/4 (44 mm) top rail Required for push side (door mout) istallatios where top rail is less tha 5-1/4 (133 mm) measured from the stop Required for pull side top jamb istallatios where head frame is less tha 3-7/8 (98 mm) Requires miimum 1-3/4 (44 mm) head frame Mouts i track to assist backcheck, does ot replace auxiliary stop Limits maximum opeig. Cosists of bumper, bumper post, ad moutig screw Mouts i track to provide hold-ope fuctio) Hold-ope poit cotrolled by clip locatio Cosists of clip ad moutig screws Requires 4040XPT-3034H Hold-Ope Track Roller - Requires miimum 3-1/2 (89 mm) top rail 4040XPT-3034 Track Roller Quiet, low frictio roller assembly Shoulder dimesio X = 1/8 (3mm) 4040XPT-3034H Hold-Ope Track Roller Quiet, low frictio roller assembly Shoulder dimesio X = 1/8 (3mm) 52 LCN Door Cotrol Catalog

8 How-to-order 4040XPT closers 1. Select fiish Stadard Powder Coat Alumium, Dark Broze, Statuary, Light Broze, Black, Brass. Closer optios Cover Metal (specify right or left had) (MC) Fiish Custom Powder Coat (RAL) (haded metal cover required) Plated Fiish, US (haded metal cover required) SRI primer (use with powder coat fiishes oly) Track Regular with Bumper (BUMPER) Hold-Ope (HO) Hold-Ope with Bumper (HBUMPER) Table of sizes Specific Screw Pack TB* w/self-reamig ad Tappig Screws (TBSRT) Wood & Machie Screw (WMS) TB*, Wood & Machie Screw (TBWMS) TORX Machie Screw (TORX) TB* & TORX Machie Screw (TBTORX) * Specify door thickess if other tha 1-3/4. Istallatio Accessories Plate, 4040XPT-18 Plate, 4040XPT-18TJ Special Template ST- Closer will be shipped with: - Stadard cylider - Stadard cover - Stadard arm - Track roller - Stadard track - Self-reamig ad tappig screws uless optios listed below are selected. Orderig Iformatio No-Sized 4040XPT cylider is adjustable from sizes 1 thru 4 ad is shipped set to size XPT Iterior door width mm mm Miimum door width mm size 2 size 3 size mm Idicates recommeded rage of door width for closer size. Reduced opeig force 4040XPT closers CAUTION! Ay maual door closer, icludig those certified by BHMA to coform to ANSI Stadard A156.4, that is selected, istalled ad adjusted based o ADA or other reduced opeig force requiremets may ot provide sufficiet power to reliably close ad latch a door. Refer to POWER OPERATORS sectio for iformatio o systems that meet reduced opeig force requiremets without effectig closig power. DOOR WIDTH * lbs. N/A N/A N/A 5.0* lbs. 4040XPT 4040XPT 4040XPT * Maximum opeig force. LCN Door Cotrol Catalog 53