WNA Series. Knobsets AVAILABLE STYLES AVAILABLE FINISHES. Finish A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA Code

Transcription

1 WNA Series Knobsets AVAILABLE STYLES Beverly Huntington Phoenix Troy AVAILABLE FINISHES Are in Brilliance finish in certain funtions Finish A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA Code

2 NOTES

3 Features Styles Weiser s SecuritiShield protects the lock mechanism for keyed sets. It also provides easier installation and stability on the door One piece chassis intergrated design for greater strength against prying Redesigned vertical screw positioning works best against downward force Installation as easy as with self aligning screw guides Grade 2, ANSI WNA Series WNA Series four-post knobsets with the SecuritiShield (Grade II, residential lock). These durable locks are rated as Medium Duty: recommended for use on both exterior and interior residential applications or indoor use for office buildings. BEVERLY HUNTINGTON PHOENIX The WNA Series knobsets are available in four distinct styles and a wide range of finishes. Various combinations of style and finish offer a knobset for use in all types of architecture, from classic to modern, from spartan to baroque. There s more, underneath the WNA knobsets beautiful appearance lies engineering efficiency. An independent pair of posts index the latch. Another pair takes on the mounting screws. Telescoping sleeves makes installation a cinch. A securitishield incorporates a onepiece, die-cast armour into the exterior trim. This protects the mechanism and makes it tough against any prying or attacks. These mechanisms are so solid they are backed by a Full Lifetime Warranty. Knobs and roses are made from top-grade brass and bronze. Double-treated with plating and chromate conversions, these knobsets are extremely durable against corrosion. For keyed exterior sets and selected interior sets, the Brilliance finish is the leading edge technology that promises brass and chrome finishes will not corrode, tarnish or discolour for a lifetime. TROY 1:1

4 Specifications WNA Series INSTALLATION 2 1/8" (54 mm) diameter cross bore. 1" (25 mm) diameter edge hole. ROSE DIAMETER 2 5/8" (67 mm). KNOB DIAMETER Beverly 2" (51 mm), Huntington 2" (51 mm), Phoenix 2 3/16" (56 mm), Troy 1 15/16" (49 mm), with cylinder 2 3/16" (56 mm). KNOB PROJECTION Beverly 2 3/8" (60 mm), Huntington 2 3/4" (70 mm), Phoenix 2 1/4" (57 mm), Troy 2 1/6" (52 mm) CYLINDERS Large size, 5 pin tumbler cylinder assembly, chromed cylinder plugs. No cylinder reversing necessary. ROSES Reinforced with die-cast SecuritiShield. EXTERIOR KNOBS AND ROSES Wrought brass. INTERNAL MECHANISMS Steel, double treated with plating and chromate conversion coating, to resist corrosion. BEARINGS AND CAMS Lubrication-free, anti-friction Delrin. LATCH BOLT 1/2" (13 mm) bolt projection latches furnished with all locks. POST INDEXING AND FLOATING HUB Automatically compensates for boring errors and eliminates bind. REVERSIBLE Keyed locks are useable as is for right or left hand doors. No cylinder reversing is necessary. DOOR THICKNESS Knob assemblies provide automatic adjustment to door thickness from 1 3/8" (35 mm) to 1 3/4" (45 mm). Can be furnished for doors over 1 3/4" (45 mm) when so ordered. When ordering for doors over 1 3/4" (45 mm) specify exact thickness of the door. CHROME PLATING Successive layers of nickel or chrome over pure brass for lifetime beauty. LATCHES WNA Series locks are supplied with adjustable latches to fit 2 3/8" (60 mm) and 2 3/4" (70 mm) backsets. Latches for 5" (127 mm) backsets will be supplied when specified. Standard latch face is 2 1/4" x 1" (57 x 25 mm) square cornered. Radius and Drive-in are available when specified. SPRINGS Non-corrosive stainless steel mechanism springs for lifetime service. LOCKING MECHANISMS AND SPINDLES Heavy steel. PACKING One set per box, with Screws and instructions for installing. 1:2

5 WNA Series Specifications Weiser SecuritiShield Protects the lock mechanism for keyed sets. It also provides easy installation and stability Installation is as easy as with self aligning screw guides Redesigned vertical screw positioning works best against downward pressure One-piece chassis integrated design for greater strength against prying WNA Series qualifies as an ANSI A156.2, Grade II lock. Listed by Underwriters s Laboratories Canada (ULC) when specified. WNA12 24 WNA17 24 WNA18 24 WNA101*12 WNA WNA WNA301*12 WNA WNA WNA501*12 WNA WNA WNA SHIPPING WEIGHT All shipping weights listed here are an approximation. Different styles and finishes might cause some variations. Lock Case Weight Function Qty. lbs. kg DOOR THICKNESS To order locks for doors other than basic, add the appropriate dash number suffix, as determined from the chart below, to the regular catalog number. If in doubt, or to order items not listed, specify the exact door thickness. Door Notes Thickness Suffix Range B 13/8" to 13/4" - (35 45 mm) 1 13/4" to 21/4" -1 (45 57 mm) Suffix Function Basic -1 WNA12 ALL RANGES WNA17 Note B Note 1 WNA18 Note B Note 1 WNA101 Note B Note 1 WNA161 Note B Note 1 WNA301 Note B Note 1 WNA331 Note B Note 1 WNA501 Note B Note 1 WNA531 Note B Note 1 WNA581 Note B Note 1 * Visual Packs in a Cut Case (C) 1:3

6 Functions WNA Series FUNCTION NUMBER DESCRIPTION WNA101 PASSAGE LATCHSET Spring latchbolt by knob from either side. Both knobs always free. BLANK PLATE WNA161 CONNECTING EXIT LOCK Deadlocking latchbolt operated by free turning knob inside. Blank plate outside. WNA301 PRIVACY BATH / BEDROOM Spring latchbolt by knob from either side, except when outside knob is locked by push in and turn-to-right action of entire inside knob. Emergency release opening in outside knob. Pushing any straight object, such as a nail, through the opening permits the outside knob to be rotated. Rotating inside knob to the left automatically releases outside knob. WNA331 PRIVACY BATH / BEDROOM Spring latchbolt by knob from either side, except when both trims are locked from inside by locking button. Emergency release opening in outside trim. Pushing any straight object, such as a nail, through the opening permits the outside knob to be rotated. Manually turning locking button unlocks both knobs. WNA501 KEYED ENTRY LOCKSET Deadlocking latchbolt by knob from either side, except when outside knob is locked by push in and turn-to-right action of entire inside knob. When outside knob is locked, latchbolt may be retracted by turning key or rotating inside knob to the left. WNA531 KEYED ENTRY LOCKSET Deadlocking latchbolt from either side, except when both trims are locked by turn button in inside trim. Turning key in outside knob or rotating inside turn button automatically releases both trims. RIGID WNA581 STOREROOM / EXIT LOCKSET Deadlocking latchbolt by key from outside and by knob inside. Outside knob is always rigid. Inside knob is always free. WNA12 DUMMY TRIM For push-pull or other friction catch doors. Installed with two wood screws. WNA17 DUMMY TRIM For push-pull or other friction catch doors. Installed with machine screw which engages threaded shank of knob through the door. WNA18 DUMMY TRIM SET For push-pull or other friction catch door. Installed with machine screw which engages threaded shank of knobs through the door. 1:4