Ground-to-Air. Antennas and Antenna Line Products BROADCAST

Transcription

1 Groud-to-Air Ateas ad Atea Lie Products BROADCAST

2 Who we are ad what we stad for Kathrei is a leadig iteratioal specialist for reliable, high-quality commuicatio techologies. We are a iovatio ad techology leader i today's coected world. Our ability to provide solutios ad systems eables people all over the world to commuicate, access iformatio ad use media, whether at home, at the office or o the road. We cover a broad spectrum: from mobile commuicatio ad RFID solutios, to satellite receptio, broadbad ad broadcast techology, to trasmissio ad receptio systems i vehicles. As a hidde champio ad family-owed eterprise, we have bee workig o the techologies of tomorrow sice We take pride i our dedicated employees ad our passio for customers ad quality. Our Solutios BUSINESS SOLUTIONS MOBILE COMMUNICATION SAT BROADBAND BROADCAST AUTOMOTIVE Fid out more about us at Catalogue Issue 2/217 All data published i previous catalogue issues hereby becomes ivalid. We reserve the right to make alteratios i accordace with the requiremets of our customers, therefore for bidig data please check valid data sheets o our homepage: Please also see additioal iformatio o iside back cover. Our quality assurace system ad our evirometal maagemet system apply to the etire compay ad are certified by TÜV accordig to EN ISO 91 ad EN ISO 141. RoHS Our products are compliat to the EU Directive RoHS as well as to other evirometally relevat regulatios (e.g. REACH).

3 Ateas for Commuicatio Ateas for Commuicatio Ateas for Navigatio Ateas for Navigatio Electrical Accessories Electrical Accessories Mechaical Accessories Mechaical Accessories Services Services

4 Summary of Types The articles are listed by type umber i umerical order. Type No. Page Type No. Page Type No. Page Type No. Page K , , K , K K B 56, K , K K K , K K , , K , , 6 K , , 61 K , K , , K K , 21 K K , , K52... K , , K , 11 K , , K , 9 K , K , K5... K , , K , 7 K , , K K , , K , K , K , , K K , 45 K , K , K

5 Ateas for Groud-to-Air Commuicatio VHF Bad 1 16 MHz UHF Bad MHz Ateas for Commuicatio Atea Type Page Yagi Ateas 6 7 Pael Ateas 8 11 Dipole Ateas Omidirectioal Ateas

6 Yagi Atea Polarizatio MHz V -elemet broadbad-yagi. Order No. 696 K5181 Iput N female Max. power 16 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 1.5 Gai 4 d Impedace 5 Ω Polarizatio Vertical Atea height 16 mm Packig size 15 x 115 x 9 mm Weight 1 kg Widload 25 N (at 16 km/h) Max. wid velocity 2 km/h (icl. 1/2 radial ice) 16 mm Material: Moutig: Groudig: Scope of supply: Hot-dip galvaized steel. All screws ad uts: Stailess steel. To pipes of mm OD by meas of hot-dip galvaized steel clamp, supplied. The atea is DC grouded by a cross sectio of 256 mm 2 hot-dip galvaized steel. Atea icludig moutig hardware. 95 mm Radiatio Patter (at mid-bad) Horizotal Radiatio Patter Vertical Radiatio Patter 6

7 Moutig Istructio Ateas for Commuicatio 7

8 Pael Atea MHz Polarizatio H V Broadbad Pael Atea. Weather-resistat alumium. Order No. 625 K5211 Iput Max. power iput Frequecy rage N female 155 W (at 5 C ambiet temperature) 88 W (at 5 C ambiet temperature) MHz VSWR < 1.4 Gai 7 d Impedace 5 Ω Polarizatio Horizotal or vertical Width/height/depth 16 / 16 / 7 mm Packig size 162 x 85 x 2 mm Weight 12 kg Lateral wid load 56 N (at 16 km/h) Max. wid velocity w/o ice 1/2 radial ice 2 km/h 12 km/h Material: Scope of supply: Moutig: Lightig protectio: Reflector scree ad dipoles: Heavy duty alodied alumium. Moutig clamps: Hot dip galvaized steel. All screws ad uts: Stailess steel. Atea icludig moutig hardware. To masts of mm OD. All metal parts of the atea are DC grouded. 7 mm 16 mm 16 mm Radiatio Patter (at mid-bad) i E-plae i H-plae 8

9 Moutig Istructio Ateas for Commuicatio 1 2 For horizotal polarizatio istall moutig clamps here Moutig to pipes of mm diameter 9

10 Pael Atea 1 16 MHz Polarizatio H V Heavy duty pael atea. Hot-dip galvaized steel with at least 85 µm zic layer. 64 mm Order No K521 Iput N female Max. power 159 W (at 5 C ambiet temperature) Frequecy rage 1 16 MHz VSWR < 1. Gai 8 d Impedace 5 Ω Polarizatio Horizotal or vertical Height/width/depth 19 x 19 x 64 mm Packig size 2 x 2 x 85 mm Weight 5 kg Wid load 12 N (at 16 km/h) Max. wid velocity 2 km/h (icl. 1/2 radial ice) 19 mm Material: Moutig: Groudig: Scope of supply: Special features: Hot-dip galvaized steel. All screws ad uts: Stailess steel. By meas of a pair of hot-dip gavaized steel clamps to pipes of mm OD, or the pair of clamps to pipes of mm. All metal parts of the atea icludig the moutig kit are DC grouded. Pael without moutig hardware. The fiberglass cover of the radiators keeps the electrical characteristics, eve uder heavy icig coditios, early costat. 19 mm Radiatio Patter (at mid-bad) i H-plae i E-plae 1

11 Moutig Istructio Ateas for Commuicatio 1 1 ø , 2: Pair of clamps for pipes of mm OD or pair of clamps for pipes of mm OD Required metric wreches: 19 mm ad 24 mm 11

12 Dipole Atea Polarizatio MHz V Dipole atea. Hot-dip galvaized steel. Order No. 641 K5511 Iput N female coector Coector positio Bottom, iside flage Max. power 28 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 1.5 Gai 5 d Impedace 5 Ω Polarizatio Vertical Atea height 294 mm Packig size x 51 x 2 mm Weight 2 kg Wid load 7 N (at 16 km/h) Max. wid velocity w/o ice 1/2 radial ice 2 km/h 15 km/h 7 mm 294 mm Material: Moutig: Groudig: Scope of supply: Hot-dip galvaized steel. All screws ad uts: Stailess steel. Flage 19 mm OD for moutig o a flaged pipe (see rearside). The atea is DC grouded by a cross-sectio of 42 mm 2 hot-dip galvaized steel. Atea with eopree O-rig at the flage, but without moutig hardware. Radiatio Patter (at mid-bad) 41 Mast 1 1 Horizotal Radiatio Patter Vertical Radiatio Patter 12

13 Moutig Istructio Ateas for Commuicatio ø 18 mm 15 mm 19 mm 1

14 Dipole Atea Polarizatio MHz V High gai dipole atea. Hot-dip galvaized steel. Order No. 642 K5521 Iput N female Coector positio Bottom iside flage Max. power 22 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 1.5 Gai 8 d Impedace 5 Ω Polarizatio Vertical Packig size 6 x 51 x 2 mm ad x 51 x 2 mm Weight 54 kg Wid load 95 N (at 16 km/h) Max. wid velocity w/o ice 1/2 radial ice Material: Moutig: 17 km/h 15 km/h Hot-dip galvaized steel. All screws ad uts: Stailess steel. Flage 21 mm OD for moutig o a flaged supportig pipe (see moutig istructio). 7 mm 64 mm Groudig: Scope of supply: The atea is DC grouded by a cross-sectio of 798 mm 2 hot-dip galvaized steel. Atea with eopree O-rig at the flage, but without moutig hardware. Radiatio Patter (at mid-bad) 24 Mast 1 1 Horizotal Radiatio Patter Vertical Radiatio Patter 14

15 Moutig Istructio Ateas for Commuicatio required metric wreches: 19 mm ø 18 mm 17 mm 21 mm 15

16 Dipole Atea Polarizatio MHz V Dipole atea. Hot-dip galvaized steel. Order No K75111 Iput N female Coector positio Bottom, iside flage Max. power 26 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 1.7 Gai 5.5 d Impedace 5 Ω Polarizatio Vertical Weight 18 kg Atea height Approx. 18 mm Packig size 145 x 4 x 2 mm Wid load 2 N (at 16 km/h) Max. wid velocity 2 km/h (icl. 1/2 radial ice) Material: Hot-dip galvaized steel. All screws ad uts: Stailess steel. 25 mm approx. 18 mm Moutig: Groudig: See flage drawig. The upper flage is suitable for istallatio of a obstructio light. All metal parts of the atea icludig the moutig kit are DC grouded. Radiatio Patter 225 MHz 4 MHz 18 9 /29 Mast 1 1 Horizotal Patter Vertical Patter 16

17 Moutig Istructio Ateas for Commuicatio 1 mm 1 mm ø 9 mm ø 14 mm ø 14 mm 1 mm 1 mm 17

18 Dipole Atea Polarizatio MHz V High-gai dipole atea. Hot-dip galvaized steel. Order No K75211 Iput N female Coector positio Bottom, iside flage Max. power W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 1.7 Gai 8 d Impedace 5 Ω Polarizatio Vertical Weight 4 kg Atea height 274 mm Packig size 28 x 4 x 2 mm Widload 45 N (at 16 km/h) Max. wid velocity 2 km/h (icl. 1/2 radial ice) 25 mm Material: Moutig: Groudig: Hot-dip galvaized steel. All screws ad uts: Stailess steel. See flage drawig. The upper flage is suitable for istallatio of a obstructio light. All metal parts of the atea icludig the moutig kit are DC grouded. 274 mm Radiatio Patter 225 MHz 4 MHz /16 Mast 1 1 Horizotal Patter Vertical Patter 18

19 Moutig Istructio Ateas for Commuicatio 1 mm 1 mm ø 9 mm ø 14 mm required metric wreches: 19 mm ø 17 mm 15 mm 19 mm 19

20 Omidirectioal Atea Polarizatio MHz V Broadbad alumium groudplae-atea with stailess steel radials. Order No K51261 Iput Coector positio Max. power Frequecy rage VSWR Gai Impedace Polarizatio Height Packig size Weight Wid load Max. wid velocity w/o ice 1/2 radial ice N female Bottom, i the atea base 6 W (at 5 C ambiet temperature) MHz < 1.6 ( MHz) < 2. ( MHz) d 5 Ω Vertical L 1 : 4 mm, L 2 : 7 mm 1 x 85 x 72 mm 1.5 kg 5 N (at 16 km/h) 2 km/h 15 km/h L 2 L1 A Material: Moutig: Groudig: Scopy of supply: Radiator: Heavy duty alodied alumium. Radials: Stailess steel 8 mm diameter. Base: High stregth cast alumium. All screws ad uts: Stailess steel. The atea ca be moutig by meas of a supplied stailess steel clamp i such a maer as to permit the cable to be ru either iside a 4 54 mm pipe (Fig. A) or outside a 2 54 mm pipe (Fig. B). The atea is DC grouded by a cross sectio of 12 mm 2 alumium. Atea icludig moutig hardware. B Radiatio Patter (at mid-bad) 78 1 Horizotal Radiatio Patter 1 Vertical Radiatio Patter 2

21 Moutig Istructio Ateas for Commuicatio A A: for pipes of 4 54 mm Ø B: for pipes of 2 54 mm Ø B Side moutig o a mast Brackets for pipes of 55 to 15 mm OD are available for this moutig mode: Distace betwee pipe ad atea 5 mm 1 mm Order No K K614 With this moutig mode the stadig wave ratio (VSWR) will be altered somewhat as a factor of clearace ad mast diameter. 21

22 Omidirectioal Atea Polarizatio MHz V 4 dipoles roud a mast coected via power splitter. Order No Iput 7-16 female Max. power 4 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 1.5 Gai d Horizotal radiatio patter: ±1.5 Deviatio from circularity Impedace 5 Ω Polarisatio Vertical Height 15 mm Weight 2 kg (for a mast of 5 mm diameter) Wid load 2.5 kn (at 18 km/h ad 4 cm radial ice) Max. wid velocity 2 km/h Material: Moutig: Groudig: Scope of supply: Hot-dip galvaized steel. O a pipe mast with a diameter of 2 6 mm. Please specify exact diameter with order. All metal parts of the atea icludig the delivered moutig kit are DC grouded. Atea icl. power splitter ad cables (pipe mast ot supplied). Radiatio Patter (at mid-bad) 78 1 Horizotal Radiatio Patter (for mast diameter 4 mm) 1 Vertical Radiatio Patter 22

23 Moutig Istructio ~ 45 mm Ateas for Commuicatio ~ 11 mm ~ 15 mm Do ot shorte the coectig cables. Fix the coectig cables adequately to pipe mast. Clamps (supplied): clamp rage 2 4 mm (order o ) or clamp rage 4 6 mm (order o ) 7-16 female 2

24 Omidirectioal Atea Polarizatio MHz V Broadbad omidirectioal atea i fiberglass radome. Order No. 671 K55211 Iput N female Coector positio Bottom, iside flage Max. power 11 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 2. Gai d Impedace 5 Ω Polarizatio Vertical Height Approx. 1 mm Packig size 14 x 15 x 15 mm Weight 5.2 kg Wid load 12 N (at 16 km/h) Max. wid velocity 2 km/h (icl. 1/2 radial ice) 12 mm diameter 1 mm Material: Moutig: Groudig: Scope of supply: Alumium radiator i fiberglass radome. Colour: Grey RAL 71. Hot-dip galvaized steel bottom. All screws ad uts: Stailess steel. By meas of 4 studs M12 to flage 1 mm diameter. The atea is DC grouded by a cross sectio of 26 mm 2 alumium. Atea icludig 1 eopree O-rig ad 4 moutig studs, each with 2 uts ad 1 washer. Radiatio Patter (at mid-bad) 78 1 Horizotal Radiatio Patter 1 Vertical Radiatio Patter 24

25 Moutig Istructio Ateas for Commuicatio 1 mm 1 mm M 12 x 5 flage 1 mm required metric wreches: 19 mm 25

26 Omidirectioal Atea Polarizatio MHz V Broadbad omidirectioal atea. Hot-dip galvaized steel. Order No K5521 Iput N female Coector positio Bottom, iside flage Max. power 1 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 2. Gai d Impedace 5 Ω Polarizatio Vertical Height 175 mm Packig size 19 x 14 x 14 mm Weight 6.6 kg Wid load 125 N (at 16 km/h) Max. wid velocity 2 km/h (icl. 1/2 radial ice) 7 mm diameter 175 mm Material: Moutig: Groudig: Scope of supply: Hot-dip galvaized steel pipes ad mouts. All screws ad uts: Stailess steel. Flage 1 mm OD for moutig o a flaged supportig pipe (see moutig istructio). The atea is DC grouded by a cross sectio of 218 mm 2 hot-dip galvaized steel. Atea with eopree O-rig at the flage, but without moutig hardware. Radiatio Patter (at mid-bad) 78 1 Horizotal Radiatio Patter 1 Vertical Radiatio Patter 26

27 Moutig Istructio Ateas for Commuicatio Ø 14 mm 1 mm 1 mm 27

28 Omidirectioal Atea Polarizatio MHz V 2-elemet / -elemet atea, cosistig of stacked, idepedetly fed dipoles arraged i lie. Order No Iput N female No. of dipoles 2 Coector positio Bottom, iside flage Max. power 4 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 1.8 Gai.5 d Horizotal radiatio patter Deviatio from circularity±. for each dipole Impedace 5 Ω Polarizatio Vertical Decouplig > 27 betwee adjacet dipoles > 25 betwee adjacet dipoles Radome diameter 12 mm Height 4 mm 6 mm Weight kg 54 kg Wid load 48 N (at 16 km/h) 7 N (at 16 km/h) Max. wid velocity 2 km/h Height Material: Moutig: Groudig: Scope of supply: Radiator: Hot-dip galvaized steel. Radome: Fiberglass, colour: Brow (RAL 119). Flage: Hot-dip galvaized steel (72746), Alumium (7298). All screws ad uts: Stailess steel. See flage drawigs. The atea is DC grouded by a cross sectio of 11 mm 2 hot-dip galvaized steel. Atea with eopree O-rig at the flage, but without moutig hardware. Radiatio Patter (at mid-bad) Horizotal Radiatio Patter Vertical Radiatio Patter 28

29 Moutig Istructio Ateas for Commuicatio mm 18 mm 225 mm 265 mm 28 mm 2 mm Mout the alumium flage o plae surface oly (max. ueveess.5 mm) Put the O-rig carefully ito the circular groove of the flage Moutig screws: M16 stailess or hot-dip galvaized steel (mi. stregth 5.6 accord. DIN 267) Max. torque: 5 Nm (screws should be greased with MoS 2 ) Put a stailess steel washer betwee alumium flage ad screw head or ut 29

30 Omidirectioal Atea Polarizatio MHz V Omidirectioal atea i fiberglass radome. Order No Iput N female Coector positio Bottom, iside flage Max. power 2 W (at 5 C ambiet temperature) Frequecy rage MHz MHz MHz VSWR < 2. < 1.7 < 1.8 Gai. d.5 d 4.5 d Horizotal radiatio patter ±. Devitatio from circularity Impedace 5 Ω Polarizatio Vertical Radome diameter 188 mm 12 mm 12 mm Height 46 mm 4 mm 6 mm Weight 46 kg kg 51 kg Wid load 765 N 4 N 7 N (at 16 km/h) Max. wid velocity 2 km/h Height Material: Moutig: Groudig: Scope of supply: Radiator: Hot-dip galvaized steel. Radome: Fiberglass, colour: Brow (RAL 119). Flage: Alumium (OD 2 mm). Hot-dip galvaized steel (OD 265 mm). All screws ad uts: Stailess steel. See flage drawigs. The atea is DC grouded by a cross sectio of 214 mm 2 (71954) ad 11 mm 2 (717265, ) hot-dip galvaized steel. Atea with eopree O-rig at the flage, but without moutig hardware. Radiatio Patter (at mid-bad) Horizotal Radiatio Patter Vertical Radiatio Patter Vertical Radiatio Patter Vertical Radiatio Patter

31 Moutig Istructio Ateas for Commuicatio mm 18 mm 225 mm 265 mm 28 mm 2 mm Mout the alumium flage o plae surface oly (max. ueveess.5 mm) Put the O-rig carefully ito the circular groove of the flage Moutig screws: M16 stailess or hot-dip galvaized steel (mi. stregth 5.6 accord. DIN 267) Max. torque: 5 Nm (screws should be greased with MoS 2 ) Put a stailess steel washer betwee alumium flage ad screw head or ut 1

32 Omidirectioal Atea Polarizatio Broadbad Omidirectioal Atea. Self supportig radome MHz V New product Order No Iput 7-16 female Max. power Up to 2 MHz: 1 W Up to 5 MHz: 6 W Frequecy rage 11 5 MHz VSWR 1.8 Gai d Half-power beam width E-plae: approx. 9 H-plae: 6 Impedace 5 Ω Polarizatio Vertical Legth 1 mm Weight (bracket excluded) 21 kg Wid load 75 N (at 16 km/h) Max. wid velocity 24 km/h mm diameter Material: Moutig: Groudig: Scope of supply: Alumium radiator i fiberglass radome. Colour: Grey RAL 75. Weather-proof alumium bottom. All screws ad uts: Stailess steel. See flage drawig. All metal parts of the atea icludig the moutig kit ad the ier coductor are DC grouded. Atea without moutig hardware. Radiatio Patters (typical) 1 Horizotal Radiatio Patter 1 Vertical Radiatio Patter VHF-Bad UHF-Bad 2

33 Moutig Istructio Prelimiary Issue Ateas for Commuicatio Bottom flage: F G 8 G M12 5 Draiage, please do ot cover! F 7-16 female iput All dimesios i mm

34 Omidirectioal Atea Polarizatio / MHz V Omidirectioal 2-uit atea. Cosistig of oe VHF ad oe UHF dipole i a commo fiberglass radome. Order No. colour: brow colour: red/white/red System VHF UHF Iput N female N female Max. power 1 W (at 5 C ambiet temperature) Frequecy rage MHz MHz VSWR < 1.8 < 2. Gai d 1 d Horizotal radiatio patter: Deviatio from circularity Impedace Polarizatio Decouplig Radome diameter Height Weight Wid load Max. wid velocity ±. ±. (225 MHz) ±1 (4 MHz) 5 Ω Vertical MHz: > MHz: > mm 6 mm 8 kg 59 N (at 16 km/h) 241 km/h 6 mm Material: Moutig: Groudig: Scope of supply: Radiator: Hot-dip galvaized steel. Radome: Fiberglass. Base: Alumium. See flage drawig. The atea is DC grouded by a cross sectio of 214 mm 2 steel. Atea with eopree O-rig at the flage, but without moutig hardware. 4

35 Moutig Istructio Ateas for Commuicatio 18 mm 28 mm 2 mm Mout oly o a plae surface with max. ueveess.5 mm Put the O-rig carefully ito the circular groove of the flage Moutig screws: M 16 stailess or hot-dip galvaized steel (mi. stregth 5.6 accord. DIN 267) Max. torque: 5 Nm (screws should be greased with MoS2) Put a stailess steel washer betwee alumium flage ad screw head or ut 5

36 Omidirectioal Atea Polarizatio / MHz V Multiple atea. Cosistig of 2 VHF ad 2 UHF omidirectioal ateas. Order No System VHF UHF Iput 2 x N female 2 x N female Coector positio Bottom Bottom Max. power 1 W 1 W (at 5 C ambiet temperature) Frequecy rage MHz MHz Horizotal radiatio patter: Deviatio from circularity < ±. < ±1 Gai d 1 d Impedace 5 Ω Polarizatio Vertical Decouplig UHF UHF: > 25 VHF VHF: > 25 UHF VHF: > 2 Height 716 mm Weight 8 kg Bedig momet (y y) 5 Nm (at 16 km/h) Wid load 1 N (at 16 km/h) Max. wid velocity 2 km/h Material: Moutig: Groudig: Scope of supply: Radiator: Hot-dip galvaized steel. Radome: Fiberglass (color: Orage/white/orage). Flage: Alumium. All screws ad uts: Stailess steel. See flage drawig. The metal parts of the atea are DC grouded. Atea with eopree O-rig at the flage, but without moutig hardware. 6

37 Moutig Istructio Ateas for Commuicatio 18 mm 28 mm 2 mm Mout the flage o plae surface oly (max. ueveess.5 mm) Put the O-rig carefully ito the circular groove of the flage Moutig screws: M16 stailess or hot-dip galvaized steel (mi. stregth 5.6 accord. DIN 267) Max. torque: 5 Nm (screws should be greased with MoS 2 ) Put a stailess steel washer betwee flage ad screw head or ut 7

38 Omidirectioal Atea Polarizatio MHz V 6 dipoles roud a mast coected via power splitter. Order No Iput 7-16 female Max. power 65 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 2. Gai d Horizotal radiatio patter: Deviatio from circularity Impedace Polarizatio Weight Wid load Max. wid velocity Mastdiameter 5 mm: ±1. (225 MHz) ±1.5 (25 MHz) ±.5 (4 MHz) 5 Ω Vertical 4 kg (for a mast of 5 mm dia.).5 kn (at 18 km/h ad 4 cm radial ice) 2 km/h Material: Moutig: Groudig: Scope of supply: Hot-dip galvaized steel. All screws ad uts: Stailess steel. O a pipe mast with a dia. of 25 6 mm. Please specify exact dia. with order. All parts of the atea icludig the delivered moutig kit are DC grouded. Atea icl. power splitter ad cables (pipe mast ot supplied). Radiatio Patter (at mid-bad) 225 MHz 1 MHz 4 MHz 1 Vertical Radiatio Patter 8

39 Moutig Istructio approx. 27 mm Ateas for Commuicatio approx. 75 mm approx. 54 mm Do ot shorte the coectig cables. Fix the coectig cables adequately to pipe mast female mast diameter 25 6 mm 9

40 Omidirectioal Atea Polarizatio MHz V Omidirectioal broadbad atea. Order No K75111 Iput N female Coector positio At the lower ed of the support pipe Max. Power 29 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 1.8 Gai.5 d Impedace 5 Ω Polarizatio Vertical Packig size 125 x 52 x 52 mm Weight 9.5 kg Widload 16 N (at 16 km/h) Max. wid velocity 2 km/h (icl. 1/2 radial ice) Material: Moutig: Groudig: Scope of supply: Hot-dip galvaized steel. All screws ad uts: Stailess steel. Parallel moutig at the top of the mast by meas of two butt straps (see moutig istructio). The atea is DC grouded by a cross-sectio of 4 mm 2 hot-dip galvaized steel. Atea without moutig hardware. Radiatio Patter 225 MHz 1 MHz 4 MHz 1 1 Horizotal Radiatio Patter Vertical Radiatio Patter 4

41 Moutig Istructio Ateas for Commuicatio ø14 41

42 Omidirectioal Atea Polarizatio MHz V Multi-elemet atea. Cosistig of several stacked ad separately fed dipoles arraged i lie. Stadard models: Multiple-uit atea Order No K K K K Iput N female Coector positio Bottom, iside flage Numer of dipoles Max. power 11 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 2. Gai each dipole 1 d Impedace 5 Ω Polarizatio Vertical Decouplig > 27 betwee adjacet dipoles Weight 29 kg 7 kg 49 kg 67 kg Radome diameter 188 mm Height 265 mm 69 mm 47 mm 577 mm Bedig momet 56 Nm 17 Nm 178 Nm 269 Nm at 16 km/h (at attachmet poit) Wid load 4 N 59 N 76 N 94 N (at 16 km/h) Max. wid velocity 2 km/h Height Material: Moutig: Scope of supply: Groudig: Radiatig elemets: Hot-dip galvaized steel. Base: Weatherproof alumium. Radome: Fiberglass, colour: Brow. Iteral screws ad uts: Stailess steel. See flage drawig. Atea with eopree O-rig at the flage, but without screws. The atea is DC grouded by a cross sectio of 214 mm 2 hot-dip galvaized steel. For stadard models 78 (45 ) Horizotal Radiatio Patter Vertical Radiatio Patter Radiatio Patter 225 MHz 4 MHz 42

43 Moutig Istructio Ateas for Commuicatio K mm 28 mm 2 mm Mout the alumium flage o plae surface oly (max. ueveess.5 mm) Put the O-rig carefully ito the circular groove of the flage Moutig screws: M16 stailess or hot-dip galvaized steel (mi. stregth 5.6 accord. DIN 267) Max. torque: 5 Nm (screws should be greased with MoS 2 ) Put a stailess steel washer betwee alumium flage ad screw head or ut 4

44 Omidirectioal Atea Polarizatio MHz V Special models of gai ateas. With a itegrated power splitter. Omidirectioal gai atea Order No Iput N female Coector positio Bottom, iside flage Max. power 11 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 2. Gai d 7 d Impedace 5 Ω Polarizatio Vertical Decouplig > 27 betwee adjacet dipoles Weight 29 kg 67 kg Radome diameter 188 mm Height 265 mm 577 mm Bedig momet 56 Nm 269 Nm at 16 km/h (at attachmet poit) Wid load 4 N 94 N (at 16 km/h) Max. wid velocity 2 km/h Height Material: Moutig: Scope of supply: Groudig: Radiatig elemets: Hot-dip galvaized steel. Base: Weatherproof alumium. Radome: Fiberglass, colour: Brow. Iteral screws ad uts: Stailess steel. See flage drawig. Atea with eopree O-rig at the flage, but without screws. The atea is DC grouded by a cross sectio of 214 mm 2 hot-dip galvaized steel. Radiatio Patter (typical) 4 1 Horizotal Radiatio Patter Vertical Radiatio Patter (example 72141) 44

45 Moutig Istructio Ateas for Commuicatio mm 28 mm 2 mm Mout the alumium flage o plae surface oly (max. ueveess.5 mm) Put the O-rig carefully ito the circular groove of the flage Moutig screws: M16 stailess or hot-dip galvaized steel (mi. stregth 5.6 accord. DIN 267) Max. torque: 5 Nm (screws should be greased with MoS 2 ) Put a stailess steel washer betwee alumium flage ad screw head or ut 45

46 46

47 Ateas for Navigatio ad Moitorig Atea Type Frequecy Rage Page Marker Beaco Atea MHz 49 Localizer Moitor Atea MHz 5 51 Glide Path Ateas 28 6 MHz DME Ateas MHz Ateas for Navigatio ADS-B Ateas MHz MHz

48 48

49 Yagi Atea Polarizatio MHz H 4-elemet yagi atea. Marker Beaco atea i upright positio. Order No Iput N female Coector positio See photo Max. power 15 W Frequecy rage MHz VSWR < 1.4 Gai 4.9 d Impedace 5 Ω Polarizatio Horizotal Height/width 198 / 28 mm Packig size 2424 x 2118 x 182 mm Weight 22 kg Widload 59 N (at 16 km/h) Max. wid velocity 18 km/h coector ~198 mm Ateas for Navigatio Material: Motage: Groudig: Hot-dip galvaized steel. Mast: Usig the supplied flage 12 x 14 mm. Walls: Usig the moutig kit All metal parts of the atea icludig the delivered moutig kit are DC grouded. ~28 mm Supplied flage: All dimesios i mm 14 t = 6 mm Radiatio Patter (at mid-bad) i H-plae i E-plae 49

50 Yagi Atea Polarizatio MHz H -elemet yagi atea. Localizer moitor atea. ~115 Order No Iput N female Max. power W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 1. Gai 5 d Impedace 5 Ω Polarizatio Horizotal Frot-to-back ratio > 15 Packig size 1525 x 119 x 92 mm Weight 1 kg Wid load 22 N (at 15 km/h) Max. wid velocity 15 km/h ~1475 Material: Moutig: Lightig protectio: Hot-dip galvaized steel. All screws ad uts: Stailess steel. To pipes of mm diameter by meas of hot-dip galvaized steel clamp, supplied. All metal parts of this atea are DC grouded. Radiatio Patter (at mid-bad) Horizotal Radiatio Patter Vertical Radiatio Patter 5

51 Moutig Istructio Clamp rage mm diameter Ateas for Navigatio 51

52 Dipole Atea Polarizatio 28 6 MHz H Half-wave dipole i frot of a reflctor scree. I fiberglass radome. Moitor atea for glide-path sigal. Order No Iput N female Coector positio Rearside Max. power 6 W (at 5 C ambiet temperature) Frequecy rage 28 6 MHz VSWR < 1. Gai 4 d Impedace 5 Ω Polarizatio Horizotal Height/width/depth / 48 / 15 mm Weight 4. kg Wid load 14 N (at 16 km/h) Max. wid velocity 2 km/h (icl. 1/2 radial ice) Material: Moutig: Groudig: Ice protectio: Scope of supply: Radiators: Heavy duty alumium. Reflector scree: High stregth alumium alloy sheet. Radome: Impact-resistat fiberglass. Hot-dip galvaized steel clamps. All screws ad uts: Stailess steel. To pipes of 6 12 mm OD by meas of hot-dip galvaized steel clamp, supplied. The atea is DC grouded by a cross sectio of 4 mm 2 alumium. The rugged, impact-resistat fiberglass radome keeps the electrical characteristics, eve uder heaviest icig, early costat. Atea icludig moutig hardware. Radiatio Patter (at mid-bad) Horizotal Radiatio Patter Vertical Padiatio Patter 52

53 Moutig Istructio Ateas for Navigatio 5

54 Pael Atea Polarizatio MHz H Glide path atea. 4 dipole pael protected by fiberglass radome. Icludes radiatio moitorig system. Order No Iput N female Max. power iput (CW) 6 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 1.1 Gai 8.5 d Impedace 5 Ω Polarizatio Horizotal Max. curret (DC) 1 A (betwee ier ad outer coductor) Width/height/depth 1 / 5 / 19 mm Packig size 16 x 5 x 5 cm Weight 12 kg Wid load (at 16 km/h) Frotal: 625 N Rearside: 875 N Lateral: 8 N Max. wid velocity w/o ice 1/2 radial ice 22 km/h 16 km/h Material: Moutig: Lightig protectio: Scope of supply: Radiators: Heavy duty cast alumium 5 x 2 mm. Reflector scree: High stregth alumium alloy sheet. Radome: Impact-resistat fiberglass. Hot-dip galvaized steel clamps. All screws ad uts: Stailess steel. E.g. by meas of hot-dip galvaized steel clamps (optioal) to be ordered separately. The atea is DC grouded by a cross sectio of 24 mm 2 alumium. Atea with two weather protective rubber caps for the coectors, but without moutig hardware. RF moitor system Iput N female Frequecy rage MHz VSWR < 1. Couplig atteuatio ±4 Radiatio Patter (at mid-bad) Horizotal Radiatio Patter Vertical Radiatio Patter 54

55 Moutig Istructio Moitorig 91 mm Ateas for Navigatio Atea 4 Dimesios i mm 55

56 Pael Atea Polarizatio MHz H Glide path atea. 8 dipole pael protected by fiberglass radome. Icludes radiatio moitorig system. Order No. 7116B Iput N female Max. power iput (CW) 6 W (at 5 C ambiet temperature) Frequecy rage MHz VSWR < 1.1 Gai 12 d Impedace 5 Ω Polarizatio Horizotal Max. curret (DC) 1 A (betwee ier ad outer coductor) Width/height/depth 2 / 5 / 19 mm Packig size 21 x 51 x 26 mm Weight 19 kg Wid load (at 16 km/h) Frotal: 125 N Rearside: 175 N Lateral: 8 N Max. wid velocity 2 km/h (icl. 1/2 radial ice) Material: Dipole system: Cast alumium. Reflector: Weatherproof alumium. Radome: Fiberglass (white). Hot-dip galvaized steel clamps. All screws ad uts: Stailess steel. Moutig: Groudig: Scope of supply: E.g. by meas of hot-dip galvaized steel brackets (optioal), to be ordered separately. The atea is DC grouded icludig the ier coductors. Atea with two weather protective rubber caps for the coectors, but without moutig hardware. RF moitor system Iput N female Frequecy rage MHz VSWR < 1. Couplig atteuatio 1 ±1 Radiatio Patter (at mid-bad) Horizotal Radiatio Patter Vertical Radiatio Patter 56

57 Moutig Istructio 185 mm Ateas for Navigatio Moitorig Atea Dimesios i mm 57

58 Omidirectioal Atea Polarizatio MHz V DME atea cosists of a umber of idetical, decoupled half-wave dipoles, phase-feedig cables ad trasformer. Two atea moitor probes itegrated. Widely immue to damage from lightig. Type icludes top mouted LED obstructio light. Order No Obstructio light Yes No Frequecy rage MHz VSWR < 1.8 (atea iput) Gai 9 ±.5 i Impedace 5 Ω Horizotal patter Omidirectioal: Devitatio from omi better ±1.5 Vertical patter uptilt ±.5 Couplig atteuatio 25 ± (atea/moitor probes) RF peak power 1 kw, modulated as per ICAO recommedatio Polarizatio Vertical Temperature rage 4 to +6 C ambiet Material: Moutig: Groudig: Obstructio light: Dipoles, decouplig elemets, supportig tube ad trasformer: High quality brass. Base: Weather-resistat alumium. Radome: Fiberglass, colour: Grey. All screws ad uts: Stailess steel. To pipes of 6 62 mm OD by meas of moutig clamps, supplied. The atea is DC grouded by a cross sectio of 98 mm 2 brass. The atea is fitted with a double LED obstructio light. The obstructio light is precofigured as follows: operatio with 1 LED ad activated failure detectio. I case of a malfuctio of the mai LED, the secod LED will be activated automatically. Techical data Supply voltage V, ~5 6 Hz Power iput 7 W Average life ~1, h Please ote: The istallatio team must be properly qualified ad also be familiar with the relevat atioal safety regulatios! No observace of followig stadards may damage or destroy the devices ad severe ijuries may occur! Radiatio Patter (at mid-bad) Mechaical specificatios Horizotal Radiatio Patter 1 Vertical Radiatio Patter Iput N female N female Coector positio Bottom Bottom Wid load 7 N 29 N (at 15 km/h with 12 mm radial ice) Max. wid velocity 2 km/h 241 km/h (icl. 12 mm radial ice) Weight 2 kg 2 kg Radome diameter 86 mm 86 mm Legth 24 mm 2657 mm Packig size [mm] 18 x 28 x 278 x 28 x 58

59 Moutig Istructio 6 OL: Obstructio light M1, M2: Atea moitor probe A: RF iput LED obstructio light M A M 1 M 2 OL N L 1 Ateas for Navigatio Bottom view MS12R-12S-P /8" 24G NEF Istallatio hits for LED obstructio light: For coectio to electric power supply a shielded cable with a shieldig grade of at least 8% ad a cross-sectio of at least 2 x 1.5 mm 2 is recommeded. The cable should t have a protectio earth (PE) wire. Due to electrical safety reasos it is madatory that the light is coected to a residual curret device (RCD) with a recommeded maximum residual curret of ma. Atea support pipe must be properly grouded. Electr. ceter Cable examples: LAPP ÖLFLEX CLASSIC 415 CP 2x1,5 Helukabel OZ-6-Y-CY 2x1,5 (Art.Nr.: 11546) Necessary cable coector: 1x Ampheol MS11R-12S-S Observace of stadards: DIN VDE 1 DIN VDE 185 DIN VDE

60 Pael Atea Polarizatio MHz V DME atea. 4 dipole pael protected by fiberglass radome. Icludes radiatio moitorig system. Order No Iputs (atea ad N female moitorig probes) Coector positios Rearside Frequecy rage MHz VSWR < 1.6 (atea iput) Gai 14 d Impedace 5 Ω Couplig atteuatio 25 ± 2 ± (atea/moitorig probes) Beam tilt + 4 ±.5 R. F. peak power 1 kw; duty cycle 2% Polarizatio Vertical Temperature rage 4 C to +6 C ambiet Height/width/depth 15 / 255 / 15 mm Packig size 142 x 6 x 25 mm Weight 12 kg Wid load Frotal: 675 N (at 16 km/h) Lateral: 5 N (at 16 km/h) Rearside: 65 N (at 16 km/h) Max. wid velocity 2 km/h (icl. 1/2 radial ice) Material: Moutig: Groudig: Scope of supply: Radiators: Brass. Reflector scree: High stregth alumium alloy sheet. Cover: Fiberglass. Clamps: Hot dip galvaized steel. All screws ad uts: Stailess steel To pipes of 4 95 mm OD by meas of moutig clamps, supplied. Optioal clamps for larger OD see accessories list. The atea is DC grouded via moutig clamps. The ier coductors are also DC grouded. Atea icludig clamps ad three weather protective rubber caps for the coectors. Radiatio Patters (at mid-bad) Horizotal Radiatio Patter Vertical Radiatio Patter 6

61 Moutig Istructio M1 Torque: M8 2 Nm M1 25 Nm Ateas for Navigatio M1, M2 = coectors moitorig system A = coector RF iput A M2 Accessories Type No. Descriptio Remarks Weight approx. Uits per atea clamp Mast: mm diameter 1.1 kg 2 (icluded i the scope of supply) clamp Mast: 28 6 mm diameter.8 kg 2 (order separately if required) clamp Mast: mm diameter 2.7 kg 2 (order separately if required) clamp Mast: 21 8 mm diameter 4.8 kg 2 (order separately if required) offset i combiatio with the clamps 1. kg 2 (order separately if required) 61

62 Omidirectioal Atea Polarizatio MHz MHz V ADS-B atea cosists of a umber of idetical, decoupled half-wave dipoles, phase-feedig cables ad trasformer. Two atea moitor probes itegrated. Widely immue to damage from lightig. Miimized coe of silece. Order No Frequecy rage VSWR Gai Impedace Horizotal patter / MHz < 1.8 (atea iput) 11.5 ±.5 i 5 Ω Omidirectioal: Devitatio from omi better ±1.5 Vertical patter uptilt 2 ±.5 Couplig atteuatio 25 ± (atea/moitor probes) R. F. peak power 1 kw, modulated as per ICAO recommedatio Polarizatio Vertical Temperature rage 55 to +7 C ambiet Material: Moutig: Groudig: Dipoles, decouplig elemets, supportig tube ad trasformer: High quality brass. Base: Weather-resistat alumium. Radome: Fiberglass, colour: Grey. All screws ad uts: Stailess steel. To pipes of 6 62 mm OD by meas of moutig clamps, supplied. The atea is DC grouded by a cross sectio of 98 mm 2 brass. Radiatio Patter (at mid-bad) Mechaical specificatios Iput N female Coector positio Bottom 1 1 Wid load 8 N (at 15 km/h with 12 mm radial ice) Horizotal Radiatio Patter Vertical Radiatio Patter Max. wid velocity Weight Radome diameter 2 km/h km/h whe usig plastic guy wires (e.g. parafilropes) 26 kg 86 mm Height 48 mm Packig size 58 x 28 x mm 62

63 Moutig Istructio 6 ø62 A M 1 M 12 M 2 Ateas for Navigatio 14 ø 86 8 Electr. ceter 5/8" 24G NEF

64 64

65 Electrical Accessories Discriptio Page Bad-pass Filter, S-P Filter, Circulators, Decouplig Uits, - Coupler Coaxial Cables ad Accessories 75 Power Splitters Ω Loads Electrical Accessories 65

66 Bad-pass Filter MHz The bad-pass filter is suitable as receivig or trasmittig filter, for oe trasmittig or receivig chael. max. 21 mm It ca be used: to improve the iput selectivity of receivers ad amplifiers, to icrease the isolatio of trasmitters, whose respective ateas are mouted close together, to suppress oise sidebads ad itermodulatio products, as a compoet to form combiers. Desig ad costructio: The bad-pass filter is desiged as a temperature stabilized λ/4 coaxial resoator. The pass bad frequecy as well as the iput ad output couplig are adjustable. Filter characteristics: Narrow pass bad rage with low isertio loss, high stop bad atteuatio, variable filter respose correspodig to the desired stop bad atteuatio. 77 mm Combiatio of several bad-pass filters: Several bad-pass filters ca be itercoected usig cables of a electrical legth of λ/4. This causes a icrease i the edge steepess of the filter curve as well as the badwidth of the pass bad. The idividual filters are tued to the ceter frequecy of the complete filter. Isertio loss of the filter combiatio = Sum isertio loss of the idividual filters + cable atteuatio of the itercoectig cables (about.1 per cable). Stop bad atteuatio of the filter combiatio = Sum stop bad atteuatio of idividual filters + additioal stop bad atteuatio. 19 mm 19 mm If the stop bad atteuatio of the idividual filters exceeds 1, approximately the followig applies: additioal stop bad atteuatio = ( 1) x 5 ; = umber of idividual filters. For special applicatios bad-pass filters ca also be itercoected with S-P filters. Tuig: The bad-pass filter is tued to the desired pass bad frequecy ad isertio loss at the factory. Please specify desired pass bad frequecy ad isertio loss (curve A, B, C, D) whe orderig. The pass bad filter ca also be tued o site usig the supplied istructios. Techical Data Order No K Frequecy rage MHz Isertio loss VSWR < 1.5 Impedace 5 Ω Iput power < 2 W Temperature rage +6 C Coectors N female, silver-plated Material Outer coductor: Alumium Ier coductor: Brass, silver-plated Istallatio Free stadig or wall moutig with moutig agles Attached hardware Filter with 2 moutig agles ad 2 coectig pieces Weight 1 kg Packig size 27 x 1125 x 27 mm Dimesios (w x h x d) 19 x max. 98 x 19 mm (with tuig rod) 66

67 Bad-pass Filter MHz Typical atteuatio curves Tuig examples: Bad-pass Filter 6174 (K642151) Atteuatio/ Atteuatio/ A B C Atteuatio/ A B C f f 25 5 A B 6174 (K642151) Electrical Accessories 4 C f Frequecy/ MHz Curve A B C Isertio loss

68 S-P Filter MHz The S-P filter (Stop-Pass filter) is used to atteuate iterferig sigals located extremely close to the operatioal frequecy. It ca be used: i the trasmissio path to suppress side bad oise ad to atteuate itermodulatio products at the receivig frequecies, i the receivig path to atteuate trasmittig frequecies, as a compoet for combiers with very low frequecy spacig. max. 21 mm Desig ad costructio: The S-P filter is desiged as a high Q temperature stabilized λ/4 coaxial resoator. Usig a special temperature stabilized couplig, high stop bad atteuatio ca be adjusted very close to the pass bad frequecy. Filter characteristics: Narrow pass bad rage with low isertio loss, high stop bad atteuatio at the stop bad frequecy. Eve i case of very small spacig betwee the pass bad ad the stop bad frequecy a high stop bad atteuatio is achieved, which ca ot be achieved usig stadard bad-pass filters of the same size. 19 mm 77 mm Combiatio of several S-P filters: Several S-P filters ca be itercoected by cables with a electrical legth of λ/4. 19 mm Isertio loss of the filter combiatio = Sum isertio loss of the idividual filters + cable atteuatio of the itercoectig cables (about.1 per cable). Stop bad atteuatio of the filter combiatio = Sum stop bad atteuatio of the idividual filters + additioal stop bad atteuatio. If the stop bad atteuatio of the idividual filters exceeds 1, approximately the followig applies: additioal stop bad atteuatio = ( 1) x 5 ; = umber of idividual filters. For special applicatios S-P filters ca also be itercoected with bad-pass filters. Tuig: The S-P filter is tued to the desired pass bad ad stop bad frequecy at the factory. Please specify desired pass bad ad stop bad frequecy whe orderig. The S-P filter ca also be tued o site usig the supplied istructios. Techical Data Order No K K Pass frequecy Below stop frequecy Above stop frequecy Frequecy rage MHz Frequecy separtio Miimum Maximum Isertio loss.2 MHz 5 MHz.5 ±.15 VSWR < 1.5 Impedace 5 Ω Iput power < 2 W Temperature rage 2 +6 C Effect of temperature <.2 khz / C Coectors N female Material Outer coductor: Alumium Ier coductor: Brass, silver-plated Istallatio Free stadig or wall moutig with moutig agles Attached hardware S-P filter with 2 moutig agles ad 2 coectig pieces Weight 1 kg Packig size 27 x 1125 x 27 mm Dimesios (w x h x d) 19 x max. 98 x 19 mm (with tuig rod) 68

69 S-P Filter MHz Typical atteuatio curves Tuig examples: (K642161) Pass frequecy below stop frequecy f A B C D EF G H -.2 f.1 A B 5 C 1 D E 15 F 2 Atteuatio/ G H f Frequecy/MHz Atteuatio/ (K642171) Pass frequecy above stop frequecy A B C D E F f f.2 A B C D E F G H Electrical Accessories G 1 2 H f Frequecy/MHz Curve A B C D E F G H Frequecy separatio stop bad frequecy / pass bad frequecy.2 MHz. MHz.4 MHz.5 MHz.6 MHz.8 MHz 1. MHz 1.2 MHz 69

70 Circulator MHz The circulator ca be used: to icrease the couplig atteuatio betwee trasmitters, to reduce itermodulatio products, to prevet adverse effects to umatched load impedace o amplifier performace. Fuctio: The circulator is a o-reciprocal compoet with low isertio loss i the forward directio (1 2) ad high atteuatio i the reverse directio (2 1). The impedace at the iput (1) of the circulator is costat ad idepedet of the impedace of the compoets followig, sice the reflected power at the output (2) is passed to the absorber port (), which must be termiated with a absorber. Dimesios of the absorbers: The absorber at port () must be dimesioed to be able to absorb the maximum power reflected at output (2). 1 2 Techical Data Order No Frequecy rage MHz Isertio loss 1 2 <.8 Isolatio 2 1 > 4 VSWR < 1.25 Impedace 5 Ω Iput power (CW) < 12 W Temperature rage C Coectors x N female Material Brass case, ickel plated Weight 1.2 kg Dimesios (w x h x d) 18 x 2 x 9 mm (icl. coectors) 7

71 Decouplig uit MHz This decouplig uit ca be used to icrease the isolatio betwee trasmitters, if the used ateas are situated very close together. The decouplig uit cosists of a double circulator ad a absorber. The impedace at the iput of the decouplig uit is costat ad is idepedet of the atea s VSWR. The sigal received or reflected by the atea is fed to the absorber. Output 2 25 W Electrical Accessories 1 Iput Techical Data Order No Frequecy rage MHz Isertio loss 1 Ö 2 <.8 Isolatio > 4 VSWR < 1.25 Impedace 5 Ω Iput power < 1 W Retur power < 25 W Temperature rage C Coectors N female Istallatio With 2 screws (max. 4 mm diameter) Weight 1.8 kg Packig size 241 x 22 x 115 mm Dimesios (w x h x d) See figure

72 - Coupler (9 Hybrid) 1 15 MHz The - coupler ca be used: as decoupled power splitter with a ratio of 1:1, for the decoupled combiig of two trasmitters with arbitrarily low frequecy spacig (at - loss), for the decoupled combiig of two receivers with arbitrarily low frequecy spacig, for the decoupled combiig of two trasmitter/ receiver uits, whose itegrated duplexers are withi the same frequecy rage, as a frequecy idepedet 9 phase shifter, as a compoet to form combiers. Desig ad fuctio: The - coupler has four ports, two of which are decoupled from each other. For example effective power eterig ito port 1 is distributed ito ports 2 ad. Port 4 is decoupled ad without power if ports 2 ad are ideally matched. I practice a absorber of suitable power is to be plaed for accordig to the mismatch of ports 2 ad. 1 Atteuatio 1 2 / Atteuatio 1 / Typical atteuatio 1 2 ad 1 vs frequecy Frequecy/MHz 15 Techical Data Atteuatio 2 vs VSWR at port 1 Order No K6271 Coectors Frequecy rage Atteuatio 1 2 / 1 Atteuatio 2 Directivity N female 1 15 MHz ±.4 See diagram > 5 Atteuatio 2 / 25 VSWR < 1.6 Impedace 5 Ω Max. power 5 W Material Brass, silver-plated Colour Grey (RAL 72) Istallatio With 2 screws (max. 6 mm diameter) Weight 1.6 kg Packig size 91 x 54 x 126 mm 2 15 Dimesios (w x h x d) 625 x 4 x 95 mm (icl. coectors) Note: VSWR ad atteuatio are measured whe the remaiig ports are termiated with 5-Ω loads VSWR at port 1 (with 5-Ω load at port 4) 72

73 Circulator MHz The circulator ca be used: to icrease the couplig atteuatio betwee trasmitters, to reduce itermodulatio products, to prevet adverse effects to umatched load impedace o amplifier performace. Fuctio: The circulator is a o-reciprocal compoet with low isertio loss i the forward directio (1 2) ad high atteuatio i the reverse directio (2 1). The impedace at the iput (1) of the circulator is costat ad idepedet of the impedace of the compoets followig, sice the reflected power at the output (2) is passed to the absorber port (), which must be termiated with a absorber. Dimesios of the absorbers: The absorber at port () must be dimesioed to be able to absorb the maximum power reflected at output (2). 1 2 Electrical Accessories Techical Data Order No Frequecy rage MHz Isertio loss 1 2 < 1.8 Isolatio 2 1 > 5 VSWR < 1.4 Impedace 5 Ω Iput power (CW) < 1 W Temperature rage C Coectors x N female Material Brass case, ickel plated Weight Approx. 1.2 kg Dimesios (w x h x d) 18 x 2 x 9 mm (icl. coectors) 15 W 7

74 Decouplig uit MHz This decouplig uit ca be used to icrease the isolatio betwee trasmitters, if the used ateas are situated very close together. The decouplig uit cosists of a double circulator ad a absorber. The impedace at the iput of the decouplig uit is costat ad is idepedet of the atea s VSWR. The sigal received or reflected by the atea is fed to the absorber. Output 2 25 W 1 Iput Techical Data Order No Frequecy rage MHz Isertio loss 1 Ö 2 < 1.8 Isolatio > 5 VSWR < 1.4 Impedace 5 Ω Iput power < 1 W Retur power < 25 W Temperature rage C Coectors N female Istallatio With 2 screws (max. 4 mm diameter) Weight 1.6 kg Packig size 241 x 22 x 115 mm Dimesios (w x h x d) See figure

75 Coaxial Cables ad Accessories KATHREIN supplies products of high quality brads. Brach cables completely cofigurated, phase-adjusted ad fully tested. Feeder cables icl. accessories up to 6 1 /8ʺ. Fire retardat jacket available. Air or foam dielectric cables. Photo: RFS Photo: RFS Electrical Accessories 75

76 Power Splitter MHz / MHz , New product Power Splitters for low-loss coectio of several ateas: Frequecy rage MHz For coectig... ateas Legth L approx. mm Max. power Watt Type No. for female coectio (equipmet ad atea side) 7-16 N 7-16 N L 1 mm Impedace: 5 Ω Iput ad output: N female or 7-16 female coector VSWR: < 1.15 Isertio loss: Material: Moutig: Pressurizatio: <.5 (of the trasformatio lie) Outer coductor: Brass with protective grey pait. Ier coductor: Brass or alumium. O flat surfaces usig the stadard moutig equipmet supplied (Bracket arm, 1 mm). To tubes of 4 mm diameter by meas of 2 tesio bad clamps Type No (please order separately). The pressurizatio-tight trasformer housig has a vetilatio tube to balace out excess pressure. For pressurized operatio (typically at mbar) this vetilatio tube must be closed with the supplied sealig screw. IP 65 (closed vetiatio tube for pressurized operatio) IP 5 (opeed vetilatio tube for o-presserized operatio) Optioal moutig accessory: Tesio bad clamp 76

77 Moutig Istructio Power Splitter , Tesio bad clamp, top view 2. Tesio bad clamp, side view. Wrap the tesio bad aroud the mast, bed it ad lock it. 4. Tighte the tesio bad by the bolt marked. Electrical Accessories 5. Fix the splitter via the brackets supplied to the tesio bad clamp as show. 77

78 Load 5 Ω 5-Ω loads are suited as absorbers for small ad medium power. They are used: as termiatio for trasmitters or amplifiers used for testig, measurig or tuig, as termiatio for circulators, directioal couplers, hybrid rig juctios ad decoupled power splitters. Special features of the loads are: very low VSWR withi a wide frequecy rage, high stability ad RF shieldig due to the closed alumium costructio, arbitrary istallatio positio because of covectioal coolig, 5 W ad 1 W models ca be istalled o frot or rear paels of electrical equipmet for heat dissipatio. 1.5 Watt * Type No Coector Frequecy rage VSWR 2 MHz 2 4 MHz 7-16 male 4 MHz < 1.1 < 1. Applicatio Idoor or outdoor (IP 65) Weight 12 g Packig size Approx. 5 x 9 x 1 mm Dimesios 4 / 2 mm diameter Watt * Type No K Coector Frequecy rage VSWR 1 MHz 1 2 MHz 2 27 MHz Applicatio Weight Packig size Dimesios N male 27 MHz < 1.8 < 1.15 < 1.2 Idoor 4 g 9 x 6 x 25 mm / 21 mm diameter

79 Load 5 Ω 1 Watt * Type No K Coector Frequecy rage VSWR 1 MHz 1 2 MHz 2 27 MHz Applicatio Weight Packig size Dimesios (w x h x d) N male 27 MHz < 1.8 < 1.15 < 1.2 Idoor Approx. 25 g 5 x 9 x 1 mm 4 x 82 x 85 mm (icludig coector) 25 Watt * Type No K Coector Frequecy rage VSWR 1 MHz 1 2 MHz 2 27 MHz Applicatio Weight Packig size Dimesios (w x h x d) 5 Watt * 7-16 male 27 MHz < 1.8 < 1.15 < 1.2 Idoor Approx. 5 g 5 x 1 x 15 mm 5 x 94 x 124 mm (icl. coector) Electrical Accessories Type No K K K K Coector N female N male 7-16 female 7-16 male Frequecy rage 27 MHz VSWR 1 MHz 1 2 MHz 2 27 MHz Applicatio Weight Packig size Dimesios (w x h x d) 67 x 9 x 1 mm (icl. coector) 67 x 9 x 18 mm (icl. coector) < 1.8 < 1.15 < 1.2 Idoor Approx. 8 g 8 x 95 x 145 mm 67 x 9 x 14 mm (icl. coector) 67 x 9 x 1 mm (icl. coector) Watt * Type No K Coector 7-16 female Frequecy rage 1 MHz VSWR 1 MHz < 1.8 Applicatio Idoor Weight Approx. 2.4 kg Packig size 1 x 195 x 18 mm Dimesios (w x h x d) 114 x 17 x 156 mm (icl. coector) * Rated power at 4 C ambiet temperature. The max. power ratig icreases or decreases with fallig or risig ambiet temperature. 79

80 8

81 Mechaical Accessories Descriptio Page Moutig Hardware for VHF Ateas 82 Stad-off Brackets 8 Moutig Hardware for Power Splitters 84 Mechaical Accessories 81

82 Moutig Hardware for VHF Ateas Compoets for moutig VHF ateas to tube masts. Material: Hot-dip galvaized steel. Stailess steel bolts ad uts are supplied. Pair of clamps for oe VHF pael Order No. Old type umber* Suitable for tube mast of mm Weight kg K K * Number oly for referece, do ot use for orderig! 82

83 Accessories Stad-off Brackets Whe mouted to the tip of a mast, the ateas described i this catalogue radiate horizotally i a circular fashio. However, they ca also be mouted laterally to a mast by usig a extesio bracket. Depedig o the spacig ad the mast diameter, various types of radiatio patters ca be achieved. Bracket with fixed spacig Type No K K Weight 2 kg 7 kg.2 kg 8.5 kg Distace A: 5 mm 1 mm Suitable for ateas with a maximum wid load of 215 N (at 15 km/h) 85 N (at 15 km/h) Suitable for ateas with moutig kit to pipe masts of 2 54 mm diameter. Attachmet By meas of moutig kit (supplied) to pipes of 55 mm 15 mm 15 mm 265 mm diameter: 55 mm 15 mm 15 mm 265 mm Material Hot-dip galvaized steel. Wid load 6 N (at 15 km/h) 6 N (at 15 km/h) K61 M1: M A = 5 Nm 6169 K614 M1: M A = 5 Nm pipe diameter 44.5 x pipe diameter 44.5 x Bracket with adjustable spacig A Implemetatio Stad-off fig. A Double stad off fig. B fig. C A: mm D: 45 mm A D Type No K K Weight 6.6 kg 1.7 kg 6 kg Distace A: mi. max. Suitable for Attachmet Material Wid load 2 54 mm diameter 125 mm 68 mm 1 mm 24 mm ateas with moutig kit to pipe masts of 9 mm diameter 5 94 mm diameter By meas of moutig kit (supplied) to pipes of 45 N (at 15 km/h) mm diameter Hot-dip galvaized steel 1 N (at 15 km/h) 4 15 mm diameter 65 N (at 15 km/h) Mechaical Accessories 74 mm 245 mm Double Bracket 125 to 68 mm 74 mm Pipe 48. x 2.6 mm (1 mm legth) free legth 65 mm 4 x 4 mm 125 to 68 mm x 4 mm Pipe 76.1 x 2.6 mm free legth 18 mm 4 x 4 mm 1 to 24 mm L x 4 Pipe 7 x 4 mm free legth 25 mm L x 4 fig. A fig. B fig. C 2 1 8

84 Moutig Hardware for Power Splitters Compoets for moutig power splitters to tube masts. Stailess steel bolts ad uts are supplied. Tesio bad for moutig medium power splitters Order No. Suitable for tube mast of mm Weight kg

85 Services Kathrei also offers full turkey-projects for Groud-to-Air Atea Systems, e.g. cosistig of: Site Survey System Plaig Customized Egieerig Fixatio Desig Hardware Delivery Istallatio ad Commissioig Services 85