MC100LVELT22 3.3V Dual LVTTL/LVCMOS to Differential LVPECL Translator Description The MC100LVELT22 is a dual LVTTL/LVCMOS to differential LVPECL trans
|
|
- Erika Clark
- 5 years ago
- Views:
Transcription
1 3.3V ual LVTTL/LVMOS to ifferential LVPEL Translator escription The is a dual LVTTL/LVMOS to differential LVPEL translator. ecause LVPEL (Low Voltage Positive EL) levels are used, only +3.3 V and ground are required. The small outline -lead package and the low skew, dual gate design of the LVELT22 makes it ideal for applications which require the translation of a clock and a data signal. Features 350 ps Typical Propagation elay <00 ps Output to Output Skew Flow Through Pinouts The 00 Series ontains Temperature ompensation LVPEL Operating Range: V = 3.0 V to 3. V with GN = 0 V When Unused TTL Input is left Open, Q Output will efault High Pb Free Packages are vailable SOI SUFFIX SE 75 TSSOP T SUFFIX SE 94R MRKING IGRMS* KVT22 LYW KR22 LYW FN MN SUFFIX SE 506 4I M 4 = ssembly Location L = Wafer Lot Y = Year W = Work Week M = ate ode = Pb Free Package (Note: Microdot may be in either location) *For additional marking information, refer to pplication Note N002/. ORERING INFORMTION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. m/on/ Semiconductor omponents Industries, LL, 200 Publication Order Number: ugust, 200 Rev. /
2 Table. PIN ESRIPTION Q0 V PIN FUNTION Q0 Q Q 2 3 LVPEL LVTTL/ LVMOS GN Qn, Qn LVPEL ifferential Outputs 0, LVTTL/LVMOS Inputs V Positive Supply GN Ground EP (FN only) Thermal exposed pad must be connected to a sufficient thermal conduit. Electrically connect to the most negative supply (GN) or leave unconnected, floating open. Figure. Lead Pinout (Top View) and Logic iagram EP Table 2. TTRIUTES haracteristics Value Internal Input Pulldown Resistor N/ Internal Input Pullup Resistor N/ ES Protection Human ody Model Machine Model > 4 kv > 200 V Table 3. MXIMUM RTINGS Moisture Sensitivity, Indefinite Time Out of rypack (Note ) Level Flammability Rating Oxygen Index: 2 to 34 UL 94 V 0.25 in Transistor ount 64 Meets or exceeds JEE Spec EI/JES7 Latchup Test. For additional information, see pplication Note N003/. Symbol Parameter ondition ondition 2 Rating Unit V Positive Power Supply GN = 0 V 7 V V I Input Voltage GN = 0 V V I V 7 V I out Output urrent ontinuous Surge T Operating Temperature Range 40 to +5 T stg Storage Temperature Range 65 to +50 J Thermal Resistance (Junction to mbient) 0 lfpm 500 lfpm SO SO J Thermal Resistance (Junction to ase) std bd SO 4 to 44 ± 5% J Thermal Resistance (Junction to mbient) 0 lfpm 500 lfpm TSSOP TSSOP J Thermal Resistance (Junction to ase) std bd TSSOP 4 to 44 ± 5% J Thermal Resistance (Junction to mbient) 0 lfpm 500 lfpm FN FN m m T sol Wave Solder Pb Pb Free <2 to 3 24 <2 to J Thermal Resistance (Junction to ase) (Note 2) FN 35 to 40 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating onditions is not implied. Extended exposure to stresses above the Recommended Operating onditions may affect device reliability. 2. JEE standard multilayer board 2S2P (2 signal, 2 power) m/on/ 2
3 Table 4. LVPEL HRTERISTIS V = 3.3 V; GN = 0.0 V (Note 3) Symbol haracteristic Min Typ Max Min Typ Max Min Typ Max Unit I Power Supply urrent m V OH Output HIGH Voltage (Note 4) mv V OL Output LOW Voltage (Note 4) mv NOTE: evice will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. evice specification limit values are applied individually under normal operating conditions and not valid simultaneously. 3. Output parameters vary : with V. V can vary ±0.5 V. 4. Outputs are terminated through a 50 ohm resistor to V 2 volts. Table 5. LVTTL/LVMOS INPUT HRTERISTIS V = 3.3 V; T = 40 to 5 (Note 5) Symbol haracteristic Min Typ Max Unit ondition I IH Input HIGH urrent 20 V IN = 2.7 V I IHH Input HIGH urrent 00 V IN = V I IL Input LOW urrent 0.2 m V IN = 0.5 V V IK.2 V I IN = m V IH Input HIGH Voltage 2.0 V V IL Input LOW Voltage 0. V NOTE: evice will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. evice specification limit values are applied individually under normal operating conditions and not valid simultaneously. 5. V can vary ±0.5 V. Table 6. HRTERISTIS V = 3.3 V; GN = 0.0 V (Note 6) Symbol haracteristic Min Typ Max Min Typ Max Min Typ Max Unit f max Maximum Toggle Frequency 350 MHz t PLH Propagation elay (Note 7) ps t skew Skew Output to Output Part to Part ps tjitter Random lock Jitter (RMS).6 ps t r /t f Output Rise/Fall Time (20 0%) ps NOTE: evice will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. evice specification limit values are applied individually under normal operating conditions and not valid simultaneously. 6. V can vary ±0.5 V. 7. Specifications for standard TTL input signal. m/on/ 3
4 river evice Q Q Z o = 50 Z o = 50 Receiver evice V TT V TT = V 3.0 V Figure. Typical Termination for Output river and evice Evaluation (See pplication Note N020/ Termination of EL Logic evices.) ORERING INFORMTION evice Package Shipping SOI 9 Units / Rail G SOI 9 Units / Rail R2 SOI 2500 / Tape & Reel R2G SOI 2500 / Tape & Reel T TSSOP 00 Units / Rail TG TSSOP 00 Units / Rail TR2 TSSOP 2500 / Tape & Reel TR2G TSSOP 2500 / Tape & Reel MNR4 FN 000 / Tape & Reel MNRG FN 000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications rochure, R0/. Resource Reference of pplication Notes N405/ EL lock istribution Techniques N406/ esigning with PEL (EL at +5.0 V) N503/ ELinPS I/O SPiE Modeling Kit N504/ Metastability and the ELinPS Family N56/ Interfacing etween LVS and EL N672/ The EL Translator Guide N00/ Odd Number ounters esign N002/ Marking and ate odes N020/ Termination of EL Logic evices N066/ Interfacing with ELinPS N090/ haracteristics of EL evices m/on/ 4
5 PKGE IMENSIONS X Y 5 4 S 0.25 (0.00) M Y SOI N SE ISSUE H M K NOTES:. IMENSIONING N TOLERNING PER NSI Y4.5M, ONTROLLING IMENSION: MILLIMETER. 3. IMENSION N O NOT INLUE MOL PROTRUSION. 4. MXIMUM MOL PROTRUSION 0.5 (0.006) PER SIE. 5. IMENSION OES NOT INLUE MR PROTRUSION. LLOWLE MR PROTRUSION SHLL E 0.27 (0.005) TOTL IN EXESS OF THE IMENSION T MXIMUM MTERIL ONITION THRU RE OSOLETE. NEW STNR IS Z H G 0.25 (0.00) M Z Y S X S SETING PLNE 0.0 (0.004) N X 45 M J MILLIMETERS INHES IM MIN MX MIN MX G.27 S S H J K M 0 0 N S SOLERING FOOTPRINT* SLE 6: mm inches *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLERRM/. m/on/ 5
6 PKGE IMENSIONS TSSOP T SUFFIX PLSTI TSSOP PKGE SE 94R 02 ISSUE 0.5 (0.006) T 0.5 (0.006) T L U U S 2X L/2 PIN IENT S 5 x K REF 0.0 (0.004) M T U S V S V 4 U F 0.25 (0.00) M NOTES:. IMENSIONING N TOLERNING PER NSI Y4.5M, ONTROLLING IMENSION: MILLIMETER. 3. IMENSION OES NOT INLUE MOL FLSH. PROTRUSIONS OR GTE URRS. MOL FLSH OR GTE URRS SHLL NOT EXEE 0.5 (0.006) PER SIE. 4. IMENSION OES NOT INLUE INTERLE FLSH OR PROTRUSION. INTERLE FLSH OR PROTRUSION SHLL NOT EXEE 0.25 (0.00) PER SIE. 5. TERMINL NUMERS RE SHOWN FOR REFERENE ONLY. 6. IMENSION N RE TO E ETERMINE T TUM PLNE -W (0.004) T SETING PLNE G ETIL E ETIL E W MILLIMETERS INHES IM MIN MX MIN MX F G 0.65 S S K L 4.90 S 0.93 S M m/on/ 6
7 PKGE IMENSIONS FN SE ISSUE PIN ONE REFERENE NOTES:. IMENSIONING N TOLERNING PER SME Y4.5M, ONTROLLING IMENSION: MILLIMETERS. 3. IMENSION b PPLIES TO PLTE TERMINL N IS MESURE ETWEEN 0.25 N 0.30 MM FROM TERMINL. 4. OPLNRITY PPLIES TO THE EXPOSE P S WELL S THE TERMINLS. 2 X X 0.0 ÇÇÇÇ ÇÇÇÇ ÇÇÇÇ TOP VIEW E MILLIMETERS IM MIN MX REF b S E 2.00 S E e 0.50 S K 0.20 L X SETING PLNE 0.0 SIE VIEW (3) 2 e e/2 4 X L K E2 5 X b NOTE 3 OTTOM VIEW ELinPS is a trademark of Semiconductor omponents INdustries, LL (SILL). ON Semiconductor and are registered trademarks of Semiconductor omponents Industries, LL (SILL). SILL reserves the right to make changes without further notice to any products herein. SILL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SILL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SILL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. ll operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SILL does not convey any license under its patent rights nor the rights of others. SILL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SILL product could create a situation where personal injury or death may occur. Should uyer purchase or use SILL products for any such unintended or unauthorized application, uyer shall indemnify and hold SILL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SILL was negligent regarding the design or manufacture of the part. SILL is an Equal Opportunity/ffirmative ction Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PULITION ORERING INFORMTION LITERTURE FULFILLMENT: Literature istribution enter for ON Semiconductor P.O. ox 563, enver, olorado 027 US Phone: or Toll Free US/anada Fax: or Toll Free US/anada orderlit@onsemi.com N. merican Technical Support: Toll Free US/anada Europe, Middle East and frica Technical Support: Phone: Japan ustomer Focus enter Phone: ON Semiconductor Website: Order Literature: m/on/ / 7 For additional information, please contact your local Sales Representative
MC100EPT V Dual LVTTL/LVCMOS to Differential LVPECL Translator
3.3V ual LVTTL/LVMOS to ifferential LVPEL Translator escription The is a dual LVTTL/LVMOS to differential LVPEL translator. Because LVPEL (Positive EL) levels are used only +3.3 V and ground are required.
More informationMC10ELT24, MC100ELT24. 5V TTL to Differential ECL Translator
M0ELT24, M00ELT24 5V TTL to ifferential EL Translator escription The M0ELT/00ELT24 is a TTL to differential EL translator. Because EL levels are used a +5 V, 5.2 V (or 4.5 V) and ground are required. The
More informationMC10EPT20, MC100EPT V LVTTL/LVCMOS to Differential LVPECL Translator
3.3V LVTTL/LVMOS to ifferential LVPEL Translator The M0EPT20 is a 3.3 V TTL/MOS to differential PEL translator. Because PEL (Positive EL) levels are used, only +3.3 V and ground are required. The small
More informationMC100EPT V Dual LVTTL/LVCMOS to Differential LVPECL Translator
M00EPT22 3.3V ual LVTTL/LVMOS to ifferential LVPEL Translator escription The M00EPT22 is a dual LVTTL/LVMOS to differential LVPEL translator. Because LVPEL (Positive EL) levels are used only +3.3 V and
More informationMC10EL52, MC100EL52. 5V ECL Differential Data and Clock D Flip Flop
5 EL ifferential ata and lock Flip Flop escription The M0EL/00EL52 is a differential data, differential clock flip-flop with reset. The device is functionally equivalent to the E452 device with higher
More informationMC10EP11, MC100EP V / 5V ECL 1:2 Differential Fanout Buffer
3.3V / 5V EL :2 ifferential Fanout Buffer escription The M0/00EP is a differential :2 fanout buffer. The device is pin and functionally equivalent to the LVEL device. With performance much faster than
More informationMC100LVELT20 Product Preview 3.3VНLVTTL/LVCMOS to Differential LVPECL Translator Description The MC100LVELT20 is a 3.3 V TTL/CMOS to differential PECL
Product Preview 3.3VНLVTTL/LVCMOS to ifferential LVPECL Translator escription The is a 3.3 V TTL/CMOS to differential PECL translator. Because PECL (Positive ECL) levels are used, only + 3.3 V and ground
More informationNB3L553/D. 2.5 V / 3.3 V / 5.0 V 1:4 Clock Fanout Buffer
2.5 V / 3.3 V / 5.0 V :4 lock Fanout Buffer Description The NB3L553 is a low skew to 4 clock fanout buffer, designed for clock distribution in mind. The NB3L553 specifically guarantees low output to output
More informationMC10ELT22, MC100ELT22. 5VНDual TTL to Differential PECL Translator
5VНual TTL to ifferential PECL Translator The MC0ELT/00ELT22 is a dual TTL to differential PECL translator. Because PECL (Positive ECL) levels are used only +5 V and ground are required. The small outline
More informationMC GHz Low Power Prescaler With Stand-By Mode
2.5 GHz Low Power Prescaler With Stand-By Mode Description The M1295 is a single modulus prescaler for low power frequency division of a 2.5 GHz high frequency input signal. MOSAI V technology is utilized
More informationMC10EP51, MC100EP V / 5V ECL D Flip-Flop with Reset and Differential Clock
3.3V / 5V E Flip-Flop with Reset and ifferential lock escription The M0/00EP5 is a differential clock flip flop with reset. The device is functionally equivalent to the E5 and VE5 devices. The reset input
More informationMC10EL16, MC100EL V ECL Differential Receiver
MC0EL6, MC00EL6 5.0 V ECL ifferential Receiver The MC0EL/00EL6 is a differential receiver. The device is functionally equivalent to the E6 device with higher performance capabilities. With output transition
More informationMC100EP16VS. 3.3V / 5V ECL Differential Receiver/Driver with Variable Output Swing
3.3V / 5V ECL ifferential Receiver/river with Variable Output Swing escription The MC00EP6VS is a differential receiver with variable output amplitude. The device is functionally equivalent to the 00EP6
More informationNBXDBA V, MHz / MHz LVPECL Clock Oscillator
. V, 106.25 MHz / 212.5 MHz LVPECL Clock Oscillator The NBXBA012 dual frequency crystal oscillator (XO) is designed to meet today s requirements for. V LVPECL clock generation applications. The device
More informationLOGIC DIAGRAM AND PINOUT ASSIGNMENT V CC TTL PECL 3. MARKING DIAGRAMS* ORDERING INFORMATION PIN DESCRIPTION HLT20 ALYW KLT20 ALYW
The MC0ELT/00ELT20 is a TTL to differential PECL translator. Because PECL (Positive ECL) levels are used, only +5 V and ground are required. The small outline -lead package and the single gate of the ELT20
More informationMC10EL33, MC100EL33. 5V ECL 4 Divider
5V EL 4 Divider Description The M0EL/00EL33 is an integrated 4 divider. The differential clock inputs and the V BB allow a differential, single-ended or A coupled interface to the device. The V BB pin,
More informationMC10EP08, MC100EP V / 5V ECL 2-Input Differential XOR/XNOR
MC0EP0, MC00EP0 3.3V / 5V ECL 2-Input ifferential XOR/XNOR escription The MC0/00EP0 is a differential XOR/XNOR gate. The EP0 is ideal for applications requiring the fastest AC performance available. The
More informationNB4N121K. 3.3V Differential 1:21 Differential Fanout Clock Driver with HCSL level Output
3.3V ifferential 1:21 ifferential Fanout lock river with HSL level Output escription The is a lock differential input fanout distribution 1 to 21 HSL level differential outputs, optimized for ultra low
More informationNBXDBA V, 75 MHz / 150 MHz LVPECL Clock Oscillator
. V, 75 MHz / 150 MHz LVPECL Clock Oscillator The NBXBA009 dual frequency crystal oscillator (XO) is designed to meet today s requirements for. V LVPECL clock generation applications. The device uses a
More informationNBXDBA019, NBXHBA019, NBXSBA V, 125 MHz / 250 MHz LVPECL Clock Oscillator
NBXBA019, NBXHBA019, NBXSBA019. V, 15 MHz / 50 MHz LVPECL Clock Oscillator The single and dual frequency crystal oscillator (XO) is designed to meet today s requirements for. V LVPECL clock generation
More informationNBXDPA V / 3.3 V, MHz / MHz LVDS Clock Oscillator
2.5 V / 3.3 V, 156.25 MHz / 312.5 MHz LVS Clock Oscillator The NBXPA017 dual frequency crystal oscillator (XO) is designed to meet today s requirements for 2.5 V and 3.3 V LVS clock generation applications.
More informationNBVSPA V, MHz LVDS Voltage-Controlled Clock Oscillator (VCXO) PureEdge Product Series
2.5 V, 212.00 MHz LVS Voltage-Controlled Clock Oscillator (VCXO) PureEdge Product Series The NBVSPA01 voltage controlled crystal oscillator (VCXO) is designed to meet today s requirements for 2.5 V LVS
More informationNBXDBA V, 62.5 MHz / 125 MHz LVPECL Clock Oscillator
. V, 62.5 MHz / 125 MHz LVPECL Clock Oscillator The NBXBA014 dual frequency crystal oscillator (XO) is designed to meet today s requirements for. V LVPECL clock generation applications. The device uses
More informationNBXDPA V / 3.3 V, 125 MHz / 250 MHz LVDS Clock Oscillator
2.5 V / 3.3 V, 125 MHz / 250 MHz LVS Clock Oscillator The NBXPA019 dual frequency crystal oscillator (XO) is designed to meet today s requirements for 2.5 V and 3.3 V LVS clock generation applications.
More informationNB4N855S 3.3 V, 1.5 Gb/s Dual AnyLevel to LVDS Receiver/Driver/Buffer/ Translator
3.3 V,.5 Gb/s ual AnyLevel to LVS Receiver/river/Buffer/ Translator escription NB4N55S is a clock or data Receiver/river/Buffer/Translator capable of translating AnyLevel input signal (LVPECL, CML, HSTL,
More informationNBXSBA /3.3 V, MHz LVPECL Clock Oscillator
2.5/. V, 5. MHz LVPECL Clock Oscillator The NBXSBA051, single frequency, crystal oscillator (XO) is designed to meet today s requirements for 2.5/. V LVPECL clock generation applications. The device uses
More informationMC100LVEP V / 3.3V ECL 2-Input Differential AND/NAND
M00VEP05 2.5V / 3.3V E 2-Input ifferential AN/NAN escription The M00VEP05 is a 2 input differential AN/NAN gate. The M00VEP05 is the low voltage version of the M00EP05 and is functionally equivalent to
More informationNBXHGA /3.3 V, MHz LVPECL Clock Oscillator
2.5/. V, 125.00 MHz LVPECL Clock Oscillator The NBXHGA019, single frequency, crystal oscillator (XO) is designed to meet today s requirements for 2.5/. V LVPECL clock generation applications. The device
More informationNBXSBA024, NBXSBB024, NBXMBB V / 3.3 V, MHz LVPECL Clock Oscillator
NBXSBA0, NBXSBB0, NBXMBB0.5 V /. V, 6.08 MHz LVPECL Clock Oscillator The single frequency, crystal oscillator (XO) is designed to meet today s requirements for.5 V /. V LVPECL clock generation applications.
More informationMC10EP51, MC100EP V / 5VНECL D Flip Flop with Reset and Differential Clock
3.3V / 5VНEC Flip Flop with Reset and ifferential Clock escription The MC0/00EP5 is a differential clock flip flop with reset. The device is functionally equivalent to the E5 and VE5 devices. The reset
More informationMBR5H100MFST3G NRVB5H100MFST3G. SWITCHMODE Power Rectifiers SCHOTTKY BARRIER RECTIFIERS 5 AMPERES 100 VOLTS
MBRHMFS, NRVBHMFS SWITHMODE Power Rectifiers These state of the art devices have the following features: Features Low Power Loss / High Efficiency New Package Provides apability of Inspection and Probe
More informationMC10EP142, MC100EP V / 5 VНECL 9 Bit Shift Register
MCEP42, MCEP42 3.3 V / 5 VНECL 9 Bit Shift Register The MCEP/EP42 is a 9 bit shift register, designed with byte-parity applications in mind. The MC/EP42 is capable of performing serial/parallel data into
More informationMC10EP57, MC100EP V / 5V ECL 4:1 Differential Multiplexer
3.3V / 5V ECL 4:1 Differential Multiplexer Description The MC10/100EP57 is a fully differential 4:1 multiplexer. By leaving the SEL1 line open (pulled LOW via the input pulldown resistors) the device can
More informationMARKING DIAGRAMS* ORDERING INFORMATION KPT23 ALYW SO 8 D SUFFIX CASE 751 TSSOP 8 DT SUFFIX CASE 948R KA23 ALYW
The MC00EPT23 is a dual differential LVPECL to LVTTL translator. Because LVPECL (Positive ECL) levels are used, only +3.3 V and ground are required. The small outline -lead package and the dual gate design
More informationNB3N502/D. 14 MHz to 190 MHz PLL Clock Multiplier
4 MHz to 90 MHz PLL Clock Multiplier Description The NB3N502 is a clock multiplier device that generates a low jitter, TTL/CMOS level output clock which is a precise multiple of the external input reference
More informationMC100LVEL V ECL D Flip Flop with Set and Reset
M00VE3 3.3V E Flip Flop with et and Reset escription The M00VE3 is a flip-flop with set and reset. The device is functionally equivalent to the E3 device but operates from a 3.3 V supply. With propagation
More informationMC100EPT22/D. MARKING DIAGRAMS* ORDERING INFORMATION SO 8 D SUFFIX CASE 751 KPT22 ALYW TSSOP 8 DT SUFFIX CASE 948R KA22 ALYW
The MC00EPT22 is a dual LVTTL/LVCMOS to differential LVPECL translator. Because LVPECL (Positive ECL) levels are used only +3.3 V and ground are required. The small outline lead package and the single
More informationNB7V52M. 1.8V / 2.5V Differential D Flip-Flop w/ Reset and CML Outputs. Multi Level Inputs w/ Internal Termination
1.8V / 2.5V ifferential Flip-Flop w/ Reset and CML Outputs Multi Level Inputs w/ Internal Termination escription The is a 10 GHz differential flip flop with a differential asynchronous Reset. The differential
More informationMM3Z2V4T1 SERIES. Zener Voltage Regulators. 200 mw SOD 323 Surface Mount
Zener Voltage Regulators mw Surface Mount This series of Zener diodes is packaged in a surface mount package that has a power dissipation of mw. They are designed to provide voltage regulation protection
More informationMC10EL31, MC100EL31. 5 V ECL D Flip Flop With Set and Reset
M0E3, M00E3 5 V E Flip Flop With et and Reset The M0E/00E3 is a flip-flop with set and reset. The device is functionally equivalent to the E3 device with higher performance capabilities. With propagation
More informationNB6L V / 3.3V Differential 2 X 2 Crosspoint Switch with LVPECL Outputs. Multi-Level Inputs w/ Internal Termination
.5V / 3.3V ifferential X Crosspoint Switch with LVPECL Outputs Multi-Level Inputs w/ Internal Termination escription The NB6L7 is a clock or data high-bandwidth fully differential x Crosspoint Switch with
More informationNTR4170NT3G. Power MOSFET. 30 V, 3.1 A, Single N Channel, SOT 23
NTR47N Power MOSFET V,. A, Single N Channel, SOT Features Low R S(on) Low Gate Charge Low Threshold Voltage Halide Free This is a Pb Free evice Applications Power Converters for Portables Battery Management
More informationP2I2305NZ. 3.3V 1:5 Clock Buffer
3.3V :5 Clock Buffer Functional Description P2I2305NZ is a low cost high speed buffer designed to accept one clock input and distribute up to five clocks in mobile PC systems and desktop PC systems. The
More informationNB3N508S. 3.3V, 216 MHz PureEdge VCXO Clock Generator with M LVDS Output
3.3V, 216 MHz PureEdge VCXO Clock Generator with M LVDS Output Description The NB3N508S is a high precision, low phase noise Voltage Controlled Crystal Oscillator (VCXO) and phase lock loop (PLL) that
More information7WB Bit Bus Switch. The 7WB3126 is an advanced high speed low power 2 bit bus switch in ultra small footprints.
2-Bit Bus Switch The WB326 is an advanced high speed low power 2 bit bus switch in ultra small footprints. Features High Speed: t PD = 0.25 ns (Max) @ V CC = 4.5 V 3 Switch Connection Between 2 Ports Power
More informationNB7L32M. 2.5V/3.3V, 14GHz 2 Clock Divider w/cml Output and Internal Termination
2.5V/3.3V, 14GHz 2 Clock ivider w/cml Output and Internal Termination escription The NB7L32M is an integrated 2 divider with differential clock inputs and asynchronous reset. ifferential clock inputs incorporate
More informationMC100EL29. 5VНECL Dual Differential Data and Clock D Flip Flop With Set and Reset
MCE29 5НEC ual ifferential ata and Clock Flip Flop With Set and Reset escription The MCE29 is a dual master slave flip flop. The device features fully differential ata and Clock inputs as well as outputs.
More informationMC100EPT V LVTTL/LVCMOS to LVPECL Translator Description The MC100EPT622 is a 10- Bit LVTTL/LVCMOS to LVPECL translator. Because LVPECL (Positiv
3.3V VTT/VCMOS to VPEC Translator Description The is a 0- Bit VTT/VCMOS to VPEC translator. Because VPEC (Positive EC) levels are used only +3.3 V and ground are required. The device has an OR- ed enable
More informationNB6N11S. 3.3 V 1:2 AnyLevel Input to LVDS Fanout Buffer / Translator
NB6NS 3.3 V :2 AnyLevel Input to LVS Fanout Buffer / Translator escription The NB6NS is a differential :2 Clock or ata Receiver and will accept AnyLevel input signals: LVPECL, CML, LVCMOS, LVTTL, or LVS.
More informationNTMFS5C604NL. Power MOSFET. 60 V, 1.2 m, 276 A, Single N Channel
NTMFSC64NL Power MOSFET 6 V,. m, 76 A, Single N Channel Features Small Footprint (x6 mm) for Compact esign Low R S(on) to Minimize Conduction Losses Low Q G and Capacitance to Minimize river Losses These
More informationMC100EPT V LVTTL/LVCMOS to LVPECL Translator
MCEPT622 3.3V VTT/VCMOS to VPEC Translator Description The MCEPT622 is a 0 Bit VTT/VCMOS to VPEC translator. Because VPEC (Positive EC) levels are used only +3.3 V and ground are required. The device has
More informationNTJS3151P. Trench Power MOSFET. 12 V, 3.3 A, Single P Channel, ESD Protected SC 88
NTJS5P Trench Power MOSFET V,. A, Single P Channel, ES Protected SC 88 Features Leading Trench Technology for Low R S(ON) Extending Battery Life SC 88 Small Outline (x mm, SC7 Equivalent) Gate iodes for
More informationNB3N106K. 3.3V Differential 1:6 Fanout Clock Driver with HCSL Outputs
3.3V Differential 1:6 Fanout Clock Driver with HCSL Outputs Description The is a differential 1:6 Clock fanout buffer with High speed Current Steering Logic (HCSL) outputs optimized for ultra low propagation
More informationMC100EL30. 5VНECL Triple D Flip Flop with Set and Reset
MCE30 5VНEC Triple Flip Flop with et and Reset The MCE30 is a triple master slave flip flop with differential outputs. ata enters the master latch when the clock input is OW and transfers to the slave
More informationNB3N853531E. 3.3 V Xtal or LVTTL/LVCMOS Input 2:1 MUX to 1:4 LVPECL Fanout Buffer
3.3 V Xtal or LVTTL/LVCMOS Input 2:1 MUX to 1:4 LVPECL Fanout Buffer Description The NB3N853531E is a low skew 3.3 V supply 1:4 clock distribution fanout buffer. An input MUX selects either a Fundamental
More informationMARKING DIAGRAMS* ORDERING INFORMATION 8 1 SO 8 D SUFFIX CASE 751 KEP51 ALYW HEP51 ALYW 8 1 TSSOP 8 DT SUFFIX CASE 948R KP51 ALYW
The MC0/EP5 is a differential clock flip flop with reset. The device is functionally equivalent to the E5 and VE5 devices. The reset input is an asynchronous, level triggered signal. ata enters the master
More informationLOW POWER SCHOTTKY. GUARANTEED OPERATING RANGES ORDERING INFORMATION
The SN74LS64 is a high speed 8-Bit Serial-In Parallel-Out Shift Register. Serial data is entered through a 2-Input AN gate synchronous with the LOW to HIGH transition of the clock. The device features
More informationMECL PLL COMPONENTS 64/65, 128/129 LOW POWER DUAL MODULUS PRESCALER WITH STAND BY MODE
Order this document by 253/ The 253 is a super low power 64/65, 2/29 dual modulus prescaler. Motorola s advanced ipolar MOSI V technology is utilized to achieve low power dissipation of 4.3 mw at a minimum
More informationNVTFS5124PL. Power MOSFET 60 V, 6 A, 260 m, Single P Channel
Power MOSFET V, A, m, Single P Channel Features Small Footprint (3.3 x 3.3 mm) for Compact esign Low R S(on) to Minimize Conduction Losses Low Q G and Capacitance to Minimize river Losses NVTFS5PLWF Wettable
More informationNB2879A. Low Power, Reduced EMI Clock Synthesizer
Low Power, Reduced EMI Clock Synthesizer The NB2879A is a versatile spread spectrum frequency modulator designed specifically for a wide range of clock frequencies. The NB2879A reduces ElectroMagnetic
More informationMC10H352. Quad CMOS to PECL* Translator
Quad CMOS to PECL* Translator Description The MC10H352 is a quad translator for interfacing data between a CMOS logic section and the PECL section of digital systems when only a +5.0 Vdc power supply is
More informationNVTFS5826NL. Power MOSFET 60 V, 24 m, 20 A, Single N Channel
Power MOSFET 6 V, 24 m, 2 A, Single N Channel Features Small Footprint (3.3 x 3.3 mm) for Compact esign Low R S(on) to Minimize Conduction Losses Low Capacitance to Minimize river Losses NVTFS5826NLWF
More informationMJD340 (NPN) MJD350 (PNP) High Voltage Power Transistors. DPAK For Surface Mount Applications SILICON POWER TRANSISTORS 0.5 AMPERE 300 VOLTS, 15 WATTS
MJD (NPN) MJD (PNP) High oltage Power Transistors For Surface Mount pplications Designed for line operated audio output amplifier, switchmode power supply drivers and other switching applications. Features
More informationMBRD620CTG Series, NRVBD640CTG Series. Switch Mode Power Rectifiers. DPAK 3 Surface Mount Package SCHOTTKY BARRIER RECTIFIERS 6.0 AMPERES, VOLTS
MBRD62CTG Series, NRVBD64CTG Series Switch Mode Power Rectifiers DPK 3 Surface Mount Package These state of the art devices are designed for use in switching power supplies, inverters and as free wheeling
More informationPCS2I2309NZ. 3.3 V 1:9 Clock Buffer
. V 1:9 Clock Buffer Functional Description PCS2I209NZ is a low cost high speed buffer designed to accept one clock input and distribute up to nine clocks in mobile PC systems and desktop PC systems. The
More informationNB6L V/3.3 V Multilevel Input to Differential LVPECL/LVNECL 1:2 Clock or Data Fanout Buffer/Translator
.5 V/3.3 V Multilevel Input to ifferential LVPECL/LVNECL : Clock or ata Fanout Buffer/Translator The NB6L is an enhanced differential : clock or data fanout buffer/translator. The device has the same pinout
More informationNVTFS5116PL. Power MOSFET. 60 V, 14 A, 52 m, Single P Channel
Power MOSFET 6 V, 4 A, 52 m, Single P Channel Features Small Footprint (3.3 x 3.3 mm) for Compact esign Low R S(on) to Minimize Conduction Losses Low Capacitance to Minimize river Losses NVTFS56PLWF Wettable
More informationNB3N108K. 3.3V Differential 1:8 Fanout Clock Data Driver with HCSL Outputs
3.3V Differential 1:8 Fanout Clock Data with HCSL Outputs Description The is a differential 1:8 Clock fanout buffer with High speed Current Steering Logic (HCSL) outputs optimized for ultra low propagation
More informationMBD301G, MMBD301LT1G. Silicon Hot-Carrier Diodes. SCHOTTKY Barrier Diodes 30 VOLTS SILICON HOT CARRIER DETECTOR AND SWITCHING DIODES
Silicon Hot-Carrier iodes SCHOTTKY Barrier iodes These devices are designed primarily for high efficiency UHF and VHF detector applications. They are readily adaptable to many other fast switching RF and
More informationP3P85R01A. 3.3V, 75 MHz to 200 MHz LVCMOS TIMING SAFE Peak EMI Reduction Device
3.3V, 75 MHz to 200 MHz LVCMOS TIMING SAFE Peak EMI Reduction Device Functional Description P3P85R0A is a versatile, 3.3 V, LVCMOS, wide frequency range, TIMING SAFE Peak EMI reduction device. TIMING SAFE
More informationMSR860G, MSRF860G. Switch-mode Soft Recovery Power Rectifiers. Plastic TO 220 Package SOFT RECOVERY POWER RECTIFIER 8.0 AMPERES, 600 VOLTS
MSRG, MSRFG Switch-mode Soft Recovery Power Rectifiers Plastic TO Package These state of the art devices are designed for use as free wheeling diodes in variable speed motor control applications and switching
More informationMBRS260T3G NRVBS260T3G. Surface Mount Schottky Power Rectifier. SMB Power Surface Mount Package SCHOTTKY BARRIER RECTIFIER 2.0 AMPERES, 60 VOLTS
MBRS60T3G, NRVBS60T3G Surface Mount Schottky Power Rectifier Power Surface Mount Package This device employs the Schottky Barrier principle in a metal to silicon power rectifier. Features epitaxial construction
More informationNJD1718, NJVNJD1718. Power Transistors. PNP Silicon DPAK For Surface Mount Applications SILICON POWER TRANSISTORS 2 AMPERES 50 VOLTS 15 WATTS
Power Transistors PNP Silicon For Surface Mount pplications Designed for highgain audio amplifier and power switching applications. Features Low ollectoremitter Saturation oltage High Switching Speed Epoxy
More informationMBR7030WTG. Switch Mode Power Rectifier SCHOTTKY BARRIER RECTIFIER 70 AMPERES, 30 VOLTS
Switch Mode Power Rectifier The Switch Mode power rectifier, a state of the art device, employs the use of the Schottky Barrier principle with a Platinum barrier metal. Features Dual Diode Construction;
More informationNTMKB4895NT3G. Power MOSFET 30 V, 82 A, Single N Channel, ICEPAK
Power MOSFET V,, Single N Channel, Features Low Package Inductance Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses
More informationNTMFS4936NCT3G. NTMFS4936NC Power MOSFET 30 V, 79 A, Single N Channel, SO 8 FL
NTMFS4936N, NTMFS4936NC Power MOSFET 3 V, 79 A, Single N Channel, Features Low R S(on), Low Capacitance and Optimized Gate Charge to Minimize Conduction, river and Switching Losses Next Generation Enhanced
More informationNTMFS5H409NL. Power MOSFET. 40 V, 1.1 m, 270 A, Single N Channel
Power MOSFET 4 V,. m, 7 A, Single N Channel Features Small Footprint (5x6 mm) for Compact esign Low R S(on) to Minimize Conduction Losses Low Q G and Capacitance to Minimize river Losses These evices are
More informationMUN5316DW1, NSBC143TPDXV6. Complementary Bias Resistor Transistors R1 = 4.7 k, R2 = k. NPN and PNP Transistors with Monolithic Bias Resistor Network
MUN3W, NSB3TPXV omplementary Bias Resistor Transistors R =.7 k, R2 = k NPN and PNP Transistors with Monolithic Bias Resistor Network This series of digital transistors is designed to replace a single device
More informationARCHIVE INFORMATION. Freescale Semiconductor, I MECL PLL COMPONENTS 8/9, 16/17 DUAL MODULUS PRESCALER ARCHIVED BY FREESCALE SEMICONDUCTOR, INC.
nc. Order this document by M226A/ The M226 is a high frequency, low voltage dual modulus prescaler used in phase locked loop (PLL) applications. The M226A can be used with MOS synthesizers requiring positive
More informationNTMFS4H01N Power MOSFET
NTMFS4HN Power MOSFET V, 334 A, Single N Channel, SO 8FL Features Optimized esign to Minimize Conduction and Switching Losses Optimized Package to Minimize Parasitic Inductances Optimized material for
More informationMUN5214DW1, NSBC114YDXV6, NSBC114YDP6 Dual NPN Bias Resistor Transistors R1 = 10 k, R2 = 47 k
MUN524W, NSB4YXV6, NSB4YP6 ual NPN Bias Resistor Transistors R = 0 k, R2 = 47 k NPN Transistors with Monolithic Bias Resistor Network This series of digital transistors is designed to replace a single
More informationMBRS2H100T3G NBRS2H100T3G, MBRA2H100T3G NRVBA2H100T3G, Surface Mount Schottky Power Rectifier SMA/SMB Power Surface Mount Package
MBRS2HT3G, NBRS2HT3G, MBR2HT3G, NRVB2HT3G, Surface Mount Schottky Power Rectifier SM/ Power Surface Mount Package This device employs the Schottky Barrier principle in a metal to silicon power rectifier.
More informationMC10H603, MC100H Bit Latch ECL to TTL Translator
9 Bit atch EC to TT Tralator escription The MC10/100603 is a 9 bit, dual supply EC to TT tralator. evices in the ON Semiconductor 9 bit tralator series utilize the 28 lead PCC for optimal power pinning,
More informationMBRA140T3G NRVBA140T3G. Surface Mount Schottky Power Rectifier. SMA Power Surface Mount Package SCHOTTKY BARRIER RECTIFIER 1.
MBR14T3G, NRVB14T3G Surface Mount Schottky Power Rectifier SM Power Surface Mount Package This device employs the Schottky Barrier principle in a large area metal to silicon power diode. State of the art
More informationPCS2P2309/D. 3.3V 1:9 Clock Buffer. Functional Description. Features. Block Diagram
3.3V 1:9 Clock Buffer Features One-Input to Nine-Output Buffer/Driver Buffers all frequencies from DC to 133.33MHz Low power consumption for mobile applications Less than 32mA at 66.6MHz with unloaded
More informationMBRA130LT3G NRVBA130LT3G. Surface Mount Schottky Power Rectifier. SMA Power Surface Mount Package SCHOTTKY BARRIER RECTIFIER 1.0 AMPERES, 30 VOLTS
MBR13LT3G, NRVB13LT3G Surface Mount Schottky Power Rectifier SM Power Surface Mount Package This device employs the Schottky Barrier principle in a metal to silicon power rectifier. Features epitaxial
More informationNTHS2101P. Power MOSFET. 8.0 V, 7.5 A P Channel ChipFET
NTHSP Power MOSFET. V,. A P Channel ChipFET Features Offers an Ultra Low R S(on) Solution in the ChipFET Package Miniature ChipFET Package % Smaller Footprint than TSOP making it an Ideal evice for Applications
More informationMMSZ5221BT1 Series. Zener Voltage Regulators. 500 mw SOD 123 Surface Mount
MMSZ5BT Series Preferred Device Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices
More informationMBRS240LT3G NRVBS240LT3G. Surface Mount Schottky Power Rectifier. SMB Power Surface Mount Package SCHOTTKY BARRIER RECTIFIER 2.0 AMPERES, 40 VOLTS
MBRS24LT3G, NRVBS24LT3G Surface Mount Schottky Power Rectifier Power Surface Mount Package These devices employ the Schottky Barrier principle in a metal to silicon power rectifier. Features epitaxial
More informationNUF4211MNT1G. 4-Channel EMI Filter with Integrated ESD Protection
4-hannel EMI Filter with Integrated ESD Protection The NUF4211MN is a four channel ( R ) Pi style EMI filter array with integrated ESD protection. Its typical component values of R = 100 and = 8.5 pf deliver
More informationMJD340, NJVMJD340T4G (NPN), MJD350, NJVMJD350T4G (PNP) High Voltage Power Transistors DPAK For Surface Mount Applications
MJD34, NJMJD34T4G (NPN), MJD3, NJMJD3T4G (PNP) High oltage Power Transistors For Surface Mount pplications Designed for line operated audio output amplifier, switchmode power supply drivers and other switching
More informationNUP4302MR6T1G. Schottky Diode Array for Four Data Line ESD Protection
Schottky Diode Array for Four Data Line ESD Protection The NUP432MR6 is designed to protect high speed data line interface from ESD, EFT and lighting. Features Very Low Forward Voltage Drop Fast Switching
More informationNB3V8312C. Ultra-Low Jitter, Low Skew 1:12 LVCMOS/LVTTL Fanout Buffer
Ultra-Low Jitter, Low Skew : LCMOS/LTTL Fanout Buffer The is a high performance, low skew LCMOS fanout buffer which can distribute ultra low jitter clocks from an LCMOS/LTTL input up to 50 MHz. The LCMOS
More informationMECL PLL COMPONENTS 64/65, 128/129 DUAL MODULUS PRESCALER
Order this document by M222LVA/ The M222LVA can be used with MOS synthesizers requiring positive edges to trigger internal counters such as Motorola s M45XXX series in a PLL to provide tuning signals up
More informationNCN Differential Channel 1:2 Mux/Demux Switch for PCI Express Gen3
4-Differential Channel 1:2 Mux/Demux Switch for PCI Express Gen3 The NCN3411 is a 4 Channel differential SPDT switch designed to route PCI Express Gen3 signals. When used in a PCI Express application,
More informationMC100EP V 2:1:9 Differential HSTL/PECL/LVDS to HSTL Clock Driver with LVTTL Clock Select and Enable
3.3 2:: Differential HSTL/PECL/LDS to HSTL Clock Driver with LTTL Clock Select and Enable Description The MC00EP80 is a low skew 2:: differential clock driver, designed with clock distribution in mind,
More informationMUN5331DW1, NSBC123EPDXV6. Complementary Bias Resistor Transistors R1 = 2.2 k, R2 = 2.2 k
MUN5W, NSBEPXV6 omplementary Bias Resistor Transistors R =. k, R =. k NPN and PNP Transistors with Monolithic Bias Resistor Network This series of digital transistors is designed to replace a single device
More informationNB4N840M. 3.3V 3.2Gb/s Dual Differential Clock/Data 2 x 2 Crosspoint Switch with CML Output and Internal Termination
3.3V 3.2Gb/s Dual Differential Clock/Data 2 x 2 Crosspoint Switch with Output and Internal Termination Description The NB4N84M is a high bandwidth fully differential dual 2 x 2 crosspoint switch with inputs/outputs
More informationMURA215T3G SURA8215T3G MURA220T3G SURA8220T3G. Surface Mount Ultrafast Power Rectifiers ULTRAFAST RECTIFIERS 2 AMPERES, VOLTS
MURTG, SUR8TG, MURTG, SUR8TG Preferred Devices Surface Mount Ultrafast Power Rectifiers Ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface
More informationMURA105, SURA8105, MURA110, SURA8110. Surface Mount Ultrafast Power Rectifiers ULTRAFAST RECTIFIERS 1 AMPERE, VOLTS
MUR5, SUR85, MUR, SUR8 Surface Mount Ultrafast Power Rectifiers Ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface mount applications where
More information