Quality SyStem Certified to iso 9001 and as9100

Transcription

1 610 Qulity SyStem ertifie to iso 9001 n S9100

2 AURORA EARING OMPANY ontents Pge No. engineering t - Prouct informtion ommercil/inustril units ro ens SPm, SP Mle Mole Rce Series...6 SP, SPG Femle Mole Rce Series...7 m, Mle 2 pc. Economy...8, G Femle 2 pc. Economy...9 Vm, V Mle Economy PTFE Line...10 V, VG Femle Economy PTFE Line...11 mm, m Mle 3 pc. Precision...12 m, mg Femle 3 pc. Precision...13 Km, K Mle 3 pc. er Resistnt...14 K, KG Femle 3 pc. er Resistnt...15 Km, K, m, Mle Lrge ore...16 K, KG,, G Femle Lrge ore...17 lrge ore Mle PTFE Line...18 lrge ore Femle PTFE Line...19 m & Mle 2 pc. igh Strength...20 Vm & V Mle 2 pc. igh Strength PTFE Line...21 m, Mle 3 pc. igh Strength...22, G Femle 3 pc. igh Strength...23 m-et, -et Mle orrosion Resistnt et, G-et Femle orrosion Resistnt...25 Sm, S Mle 3 pc. orrosion Resistnt...26 S, SG Femle 3 pc. orrosion Resistnt...27 Sm-e, S-e Mle 3 pc.stinless Steel...28 S-e, SG-e Femle 3 pc. Stinless Steel...29 ro en StuS...30 Jm nuts Inch n Metric...31 ro en linkges...32 metri ro ens n SPeril erings m-m, -m Mle 2 pc. Metric Economy m, G-m Femle 2 pc. Metric Economy...33 mm-m, m-m Mle 3 pc. Metric Precision...34 m-m, mg-m Femle 3 pc. Metric Precision...35 Km-m, K-m Mle 3 pc. Metric er Resistnt...36 K-m, KG-m Femle 3 pc. Metric er Resistnt...37 m-m, -m Mle 3 pc. Metric igh Strength m, G-m Femle 3 pc. Metric igh Strength...39 om-m Metric Sphericl erings...40 Pge No. frture re Sphericl Plin erings - evy Duty Metric...51 frture re Sphericl Plin erings - Extene ith ll Inch...52 frture re Sphericl Plin erings - Extene ith ll Metric...53 frture re Angulr ontct Sphericl Plin erings - Inch...54 frture re Angulr ontct Sphericl Plin erings - Metric...55 frture re Angulr ontct Sphericl Plin erings - Metric Ptfe...56 frture re erings Interchnge Guie...57 SuGGeSte ousing ores - Inch, Metric...58 SuGGeSte ousing ores - OM, OM, MI, AI, SI..59 SuGGeSte ousing ores - LOM, OM-M...60 SPeil units ll ering Ro Ens...61 igh Performnce units ro ens Xm, X Mle 3 pc. Extr Strength...62 Xm, X Mle 3 pc. igh Strength Alloy...63 rm, rxm Mle 3 pc. igh Strength Nickel Plte...64 Xm-t, X-t Mle igh Mislign/Strength PTFE Line...65 Prm-t, PrXm-t Mle 3 pc. igh Performnce PTFE Line..66 lm, l, Xlm, Xl Mle Aluminum 3pc Series...68 SPeril erings -t, -tg igh Mislignment PTFE Line...65 Pn-t, Pn-tG igh Performnce Nrrow PTFE Line...67 P-t, P-tG igh Performnce ie PTFE Line...67 militry Specifiction units ro ens Sm-t, S-t Mle igh Strength PTFE Line...70 S-t, SG-t Femle igh Strength PTFE Line...71 SPeril erings n-t, n-tg Nrrow PTFE Line t, -tg ie PTFE Line...73 SPeril erings om, om Stnr Series...41 om-k, om-k er Resistnt...42 om-e Stinless Series...43 lom Lrge Size...44 i, Si, mi...45 frture re Sphericl Plin erings - Inch...46 frture re Sphericl Plin erings - Metric...47 frture re Sphericl Plin erings - Inch Ptfe..48 frture re Sphericl Plin erings - Metric Ptfe..49 frture re Sphericl Plin erings - evy Duty Inch...50 ro ens Gmm, Gm Mle Generl Avition...74 Gm, GmG Femle Generl Avition...75 itionl t & referene Sphericl ering Instlltion...76, 77 Specil Size Rce r Prts...78 Inch/Metric onversion Tble...79 Engineering Informtion...80 Terms Trnsltions...81 exlusive Ro Ens n Linkges...82 exlusive 2D n 3D AD Drwings...83

3 uror ering ompny mnufcturing n worlwie supplier of the highest qulity ro ens n sphericl berings - nywhere! Generl informtion In 1971 new compny entere the ro en n sphericl bering mrketplce. This new firm, Auror ering ompny, soon becme mjor force in the ro en inustry. Known primrily for high qulity prouct n strong commitment to customer service, the firm rmticlly increse its mrket coverge n now serves nerly every inustry n erospce mrket. These mrkets inclue mong others: textile n pckging mchinery, mchine tools, business mchines, recretion n exercise equipment, griculturl n off highwy vehicles, commercil trnsporttion n high performnce rcing vehicles s well s militry equipment n commercil ir n spce crft. Over the yers, Auror ering hs retine its originl business philosophy of furnishing high qulity prouct t competitive prices. In ition, the compny's initil gols of proviing prompt elivery n furnishing service with personl touch hve been rigily mintine. Auror ering offers complete line of stnr ro en n sphericl berings. e lso esign n mnufcture specil berings to meet vriety of pplictions tht require custom engineere units or specil mterils. Now mrketing proucts worlwie, Auror ering fiels very competent sles force tht is vilble to ssist n provie you with prcticl n soun solution to ro en n sphericl bering ppliction problems n chllenges. Prout informtionengineering t ro ens Auror ering ompny ro ens re, unless note, mnufcture utilizing two construction styles. They re of the two or three-piece type. oth re me with the soli, or onepiece, rce construction metho n feture the vntges of metl-to-metl contct between bering components. (PTFE to metl interfce my lso be incorporte when specifie). The stnr two-piece style consists of boy n precision groun het trete steel bll. This type of construction llows the ro en boy to crry greter ril sttic lo. This configurtion lso offers greter mislignment cpbilities. A vriety of mterils n plting options for the component prts in this series re vilble. Any col-formble steel in stinless n lloy steel ctegories cn be specifie for the boy, n ll hrenble lloys such s n 440 stinless steel my be employe for the bll component. onsult our engineering eprtment for mterils to fit your specil ppliction. Mterils use in the stnr ctlog items re outline on the pproprite etil pge. SPeril erings These berings incorporte the single piece rce type construction, lso proviing excellent bll-to-rce conformity. They cn be re-lubricte through n nnulr groove in the outer rce with two interconnecting holes positione t 180 egrees. Vrious metls my lso be substitute in these types of units to meet specil requirements. Recommene housing bores re given on pges Ptfe line ro ens n SPeril erings omposite PTFE line rces re vilble s note in most ro en bering units n ll sphericl berings. The steel rce hs self-lubricting liner; PTFE impregnte woven fbric, chemiclly bone to the inner imeter of the rce, n is enote by the suffix T. All Auror ering liner style options re mintennce free n offer improve frictionl chrcteristics. They hve been evelope by Auror engineers specificlly for bering use, n re exclusive to Auror ering proucts. Except s note, AT1400 is supplie s the stnr liner in ll commercil units. It is esigne primrily to stisfy the emns of the commercil/inustril mrket s well s most high performnce pplictions. This liner cn be use in tempertures rnging from -65 to +250 F. AT3200 is n ultr-high performnce liner fully qulifie to SAE- AS81820 (formerly MIL ), evelope for militry n ircrft/erospce pplictions. This liner offers higher lo crrying cpcity s well s gretly increse ynmic wer chrcteristics n cn be use in tempertures rnging from -65 to +325 F. This liner is stnr on ll militry specifiction berings mnufcture by Auror ering, s well s certin high performnce commercil berings use in the utomotive rcing inustry. It cn lso be specifie on other line proucts mnufcture by Auror ering where emning pplictions require its superior performnce chrcteristics. AT2100 is use in commercil units with stinless steel rce construction. It is tilore for pplictions with queous environments. Auror ering lso hs vilble vriety of lternte liner configurtions to suit specil requirements. Auror 2 piece ro ens with the prefix V use Auror s jckete composite liner, resulting in the benefits of PTFE line bering t n economicl price. The three-piece style consists of boy, bll n rce. This type of unit, offering fully swge bering construction, fetures the vntges of mximum sphericl conformity between the bll n rce. It lso offers flexibility in tht mny ifferent types of mterils cn be interchnge in ech component prt, proviing combintions tht cn be tilore to meet just bout ny ppliction requirement. informtion on these n other liner configurtions cn be foun t 3

4 ril Stti lo Pity ro ens The ril sttic lo cpcity is bse upon the minimum mechnicl properties of the esign configurtion in the stresse re. The ril sttic lo cpcity clle out in the ro en specifiction chrts is efine s single cycle, uniirectionl pplie lo to cuse filure. Operting los shoul be bse on the sttic lo rtings, incorporting pproprite sfety fctors to suit the ppliction. hen ro en is to be pplie in full rottion, the surfce spee of the bll shoul be kept below 20 feet per minute or the rottionl spee shoul be below 100 RPM, whichever is lower, with the operting los not to excee 10% of the ril sttic lo. Lo rtings liste in the stnr etil pges re pplicble to ro ens supplie without grese fittings. Lo rtings for units employing fittings my be ffecte ue to lighter cross section in the stresse re. for informtion on the ro en ril sttic lo rtings with fittings n other specific lo rting informtion, consult the uror ering engineering eprtment. Xil Stti lo Pity ro ens Axil sttic lo cpcity is the force tht is pplie through the bore of the bll. For Auror two-piece ro ens, mximum xil sttic lo cpcity is recommene to be 15 percent of the ril sttic lo cpcity. For three-piece ro ens, mximum xil sttic lo cpcity is generlly recommene s 10 percent of ril sttic lo cpcity. It shoul be note, however, tht on three-piece units fctors such s rce mteril, boy mteril n imensions my ffect xil sttic lo cpcity. For further informtion, consult the Auror ering engineering eprtment. ril Stti limit lo Pity SPeril erings Ril sttic limit los re mximum sttic bse on the mximum permnent set in the bering rce of 0.2% of the bll imeter. If greter permnent set cn be llowe or if lternte rce mterils re use consult our engineering eprtment for chnge fctors. Operting los re bse on the ril sttic limit lo rting n pproprite sfety fctors shoul be utilize to suit the ppliction. Mx xil lo is recommene t 20 percent of the ril sttic lo. Extreme cre shoul be use on selecting sufficiently strong housing to ccept this type of bering. ering mislignment A ro en or sphericl bering's bility to mislign is mesure by the egree of the bll cn ccommote without interference. The of mislignment in ro en is limite by the bll with n he imeter s shown in figure 1. This rrngement is clle clevis mount, n is the type represente in the stnr ro en etil pges. If e mislignment is necessry, this cn be ccomplishe by utilizing spcers between the clevis mounting n bll fce, or by using specil ro ens esigne to meet specific requirements. Mislignment in sphericl bering is limite by the bll n rce with with respect to the bll imeter, illustrte in figure 3. This is the mounting type represente in the stnr etil pges for sphericl berings. Mounting rrngements for sphericl berings such s shown in figures 2 through 4 re lso use with ro ens. The mislignment is then clculte by selecting the proper formul below. 1 ngle of mislignment figure 2 figure 3 2 = Sin -1 - Sin -1 3 = Sin -1 - Sin -1 figure 4 4 = os -1 - Sin -1 A A R R R R 4 figure 1 1 = Sin -1 - Sin -1 D D reference letters - ll ore M-Outer Rce hmfer D - e Dimeter of Outer Rce Dimeter R - ll Dimeter - ousing ith A - (D-2M) ll ith

5 3-Piee n 2-Piee ering esign 3-Piece unit ousing insert onsists of ALL n RAE SSemle ousing n insert in Pre-StKinG PoSition SSemle ousing n insert in StKe PoSition hmfers on both sies NOTE - Re-Lube hole for lubriction through shnk of housing. Single piece rce, steel, het-trete (optionl), fetures swge construction for mximum performnce. Alternte rce mterils vilble to suit your ppliction. Note extension of rce beyon with of housing in the prestking position. After stking, the sies of rce hve been upset into chmfers. ll is subsequently loosene holing close tolernce fits between bll n rce. 2-Piece unit ousing rey for swging Precision groun bll - (vilble in lternte mterils) - for close tolernce fits. ousing n ll in pre-swging position. Sies of housing re close roun bll for mximum strength unit. 5

6 SPm & SP SerieS mle ro ens Mole Rce Economy oy - Low crbon steel, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. rce - Mole, selflubricting, reinforce Nylon. This series fetures mole rce compoun esigne to provie low friction, low moisture bsorbing properties. This series is lso vilble in stue configurtion. Specify by ing suffix S. Ex: SPM-8S ro en no DIMENSIONS IN INES ±.015 ll i. ±.062 thre unf-2 ril Sttic lo rg. t. SPm-3 SPm-4 SPm-5 SPm-6 SPm-7 SPm-8 SPm-10 SPm-12 SP-3 SP-4 SP-5 SP-6 SP-7 SP-8 SP-10 SP /4-28 5/ /8-24 7/ /2-20 5/8-18 3/ ,210 2,470 2,740 4,210 5,350 6,430 8,300 10, ro en no ±.38 ll i. ± 1.57 thre unf-2 ril Sttic lo newtons rg. t. Grms 6 SPm-3 SPm-4 SPm-5 SPm-6 SPm-7 SPm-8 SPm-10 SPm-12 SP-3 SP-4 SP-5 SP-6 SP-7 SP-8 SP-10 SP /4-28 5/ /8-24 7/ /2-20 5/8-18 3/ ,382 10,987 12,188 18,726 23,797 28,601 36,918 48,

7 SP & SPG SerieS femle ro ens Mole Rce Economy oy - Low crbon steel, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. rce - Mole, selflubricting, reinforce Nylon. This series fetures mole rce compoun esigne to provie low friction, low moisture bsorbing properties. This series is lso vilble in stue configurtion. Specify by ing suffix S. Ex: SP-8S ROD END NO DIMENSIONS IN INES ±.015 K ±.015 J ±.015 ll i. ±.062 thre unf-2 ril Sttic lo rg. t. SP-3 SP-4 SP-5 SP-6 SP-7 SP-8 SP-10 SP-12 SPG-3 SPG-4 SPG-5 SPG-6 SPG-7 SPG-8 SPG-10 SPG /4-28 5/ /8-24 7/ /2-20 5/8-18 3/ ,210 2,470 2,740 4,100 5,350 6,430 8,300 10, ROD END NO ±.38 K ±.38 J ±.38 ll i. ± 1.57 thre unf-2 ril Sttic lo newtons rg. t. Grms SP-3 SP-4 SP-5 SP-6 SP-7 SP-8 SP-10 SP-12 SPG-3 SPG-4 SPG-5 SPG-6 SPG-7 SPG-8 SPG-10 SPG /4-28 5/ /8-24 7/ /2-20 5/8-18 3/ ,382 10,987 12,188 18,237 23,797 28,601 36,918 48,

8 m & SerieS mle ro ens Generl Purpose - Economy Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese consult our engineering eprtment. oy - Low crbon steel, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. Grese fittings not vilble on these sizes. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: M-6Z F Flush type fitting Ex: M-6F ro en no. m-3 m-4 m-5 m-6 m-7 m-8 m-10 m DIMENSIONS IN INES ± ll i thre unf /4-28 5/ /8-24 7/ /2-20 5/8-18 3/ ril Sttic lo 1,204 2,212 3,577 5,068 6,345 8,338 9,713 14,207 rg. t ro en no. m-3 m-4 m-5 m-6 m-7 m-8 m-10 m ± ll i thre unf /4-28 5/ /8-24 7/ /2-20 5/8-18 3/ ril Sttic lo newtons 5,355 9,839 15,910 22,542 28,223 37,087 43,203 63,193 rg. t. Grms

9 & G SerieS femle ro ens Generl Purpose - Economy oy - Low crbon steel, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. Left hn units hve ientifiction groove ner en of shnk. Grese fittings not vilble on these sizes. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: -6Z F Flush type fitting Ex: -6F ro en no G-3 G-4 G-5 G-6 G-7 G-8 G-10 G DIMENSIONS IN INES ± K J ll i thre unf /4-28 5/ /8-24 7/ /2-20 5/8-18 3/ ril Sttic lo 2,079 3,208 3,824 5,087 6,385 9,096 9,713 14,207 rg. t ro en no G-3 G-4 G-5 G-6 G-7 G-8 G-10 G ± K ± J ± ll i thre unf /4-28 5/ /8-24 7/ /2-20 5/8-18 3/ ril Sttic lo newtons 9,247 14,269 17,009 22,627 28,400 40,459 43,203 63,193 rg. t. Grms

10 Vm & V SerieS mle ro ens Generl Purpose - Economy - Self-Lubricting oy - Low crbon steel, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. ushing - Steel cke, PTFE omposite ro en no DIMENSIONS IN INES ±.015 ll i thre unf-3 ril Sttic lo Vm-5 V / , Vm-6 V / , Vm-7 V / , Vm-8 V / , Vm-10 V / , Vm-12 V / , rg. t. 10 ro en no ±.38 ll i thre unf-3 ril Sttic lo newtons Vm-5 V / , Vm-6 V / , Vm-7 V / , Vm-8 V / , Vm-10 V / , Vm-12 V / , rg. t. Grms

11 V & VG SerieS femle ro ens Generl Purpose - Economy - Self-Lubricting oy - Low crbon steel, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. ushing - Steel cke, PTFE omposite Left hn units hve ientifiction groove ner en of shnk. ro en no DIMENSIONS IN INES ±.015 K J ll i thre unf-2 ril Sttic lo V-5 VG / , V-6 VG / , V-7 VG / , V-8 VG / , V-10 VG / , V-12 VG / , rg. t. ro en no ±.38 K ±.25 J ±.25 ll i thre unf-2 ril Sttic lo newtons V-5 VG / , V-6 VG / , V-7 VG / , V-8 VG / , V-10 VG / , V-12 VG / , rg. t. Grms 11

12 mm & m SerieS mle ro ens Generl Purpose - Precision (PTFE Liners Avilble) oy - rbon steel protective cote for corrosion resistnce. No. 16 series stnr boy is lloy steel not het trete. rce - rbon steel, protective cote for corrosion resistnce heck vilbility. Grese fitting not vilble. 1 Thres 6-32 UN. 2 Thres 1-14 UNS. 3 Tolernce vrition: D ±.020, A ±.020, , , 4 Tolernce vrition: D ±.51, A ±.51, +.089, -.013, ±.25 ro en no DIMENSIONS IN INES ±.015 ll i thre unf-3 ril Sttic lo mm-2 m mm-3 m , mm-4 m / , mm-5 m / , mm-6 m / , mm-7 m / , mm-8 m / , mm-10 m / , mm-12 m / , mm-14 m / , mm-14-1 m / , mm-16 m / , mm-16-1 m , mm-16-2 m , ro en no ±.38 ±.25 ll i. ll - Alloy steel, het trete, hr chrome plte. notes - All sizes vilble with stus upon request. Units re supplie without grese fittings. hen grese fittings re require, specify by ing suffixes s esignte. Z Zerk type fitting Ex: MM-6Z F Flush type fitting Ex: MM-6F T PTFE liner Ex: MM-6T Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese consult our engineering eprtment thre unf-3 ril Sttic lo newtons rg. t. rg. t. Grms mm-2 m ,236 6 mm-3 m , mm-4 m / , mm-5 m / , mm-6 m / , mm-7 m / , mm-8 m / , mm-10 m / , mm-12 m / , mm-14 m / , mm-14-1 m / , mm-16 m / ,670 1,091 mm-16-1 m , mm-16-2 m ,

13 m & mg SerieS femle ro ens Generl Purpose - Precision (PTFE Liners Avilble) oy - rbon steel protective cote for corrosion resistnce. No. 16 series stnr boy is lloy steel not het trete. rce - rbon steel, protective cote for corrosion resistnce ro en no DIMENSIONS IN INES ±.015 K J ll i thre unf-2 ril Sttic lo m-2 mg , m-3 mg , m-4 mg / , m-5 mg / , m-6 mg / , m-7 mg / , m-8 mg / , m-10 mg / , m-12 mg / , m-14 mg / , m-14-1 mg / , m-16 mg / , m-16-1 mg , m-16-2 mg , ro en no ll - Alloy steel, het trete, hr chrome plte. notes - All sizes vilble with stus upon request. heck for vilbility Left hn units hve ientifiction groove ner en of shnk 1 Thres 6-32 UN 2 Thres 1-14 UNS 3 Tolernce vrition: D ±.020, A ± , ,, K ±.015, J ± Tolernce vrition: D ±.51, A ± , -.013, ±.25, K ±.38, J ± ±.38 ±.25 K ±.25 J ±.25 Grese fitting not vilble. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: M-6Z F Flush type fitting Ex: M-6F T PTFE liner Ex: M-6T ll i thre unf-2 ril Sttic lo newtons m-2 mg ,344 9 m-3 mg , m-4 mg / , m-5 mg / , rg. t. rg. t. Grms m-6 mg / , m-7 mg / , m-8 mg / , m-10 mg / , m-12 mg / , m-14 mg / , m-14-1 mg / , m-16 mg / , m-16-1 mg ,670 1,093 m-16-2 mg ,670 1,093 13

14 Km & K SerieS mle ro ens Generl Purpose - Precision - er Resistnt oy - rbon steel protective cote for corrosion resistnce. No. 16 series stnr boy is lloy steel not het trete. rce - Alloy steel, het trete, protective cote for corrosion resistnce heck for vilbility. 1 Tolernce vrition: D ±.020, A ±.020, , , 2 Tolernce vrition: D ±.51, A ±.51, +.089, -.013, ±.25 3 Thres 1-14 UNS. ro en no DIMENSIONS IN INES ±.015 ll i. ll - Alloy steel, het trete, hr chrome plte. notes - All sizes vilble with stus upon request. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: KM-6Z F Flush type fitting Ex: KM-6F Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese consult our engineering eprtment thre unf-3 ril Sttic lo Km-3 K , Km-4 K / , Km-5 K / , Km-6 K / , Km-7 K / , Km-8 K / , Km-10 K / , Km-12 K / , Km-14 K / , Km-16 K / , Km-16-1 K , Km-16-2 K , rg. t ro en no ±.38 ±.25 ll i thre unf-3 ril Sttic lo newtons rg. t. Grms Km-3 K , Km-4 K / , Km-5 K / , Km-6 K / , Km-7 K / , Km-8 K / , Km-10 K / , Km-12 K / , Km-14 K / , Km-16 K / ,670 1,091 Km-16-1 K , Km-16-1 K ,

15 K & KG SerieS femle ro ens Generl Purpose - Precision - er Resistnt oy - rbon steel protective cote for corrosion resistnce. No. 16 series stnr boy is lloy steel not het trete. rce - Alloy steel, het trete, protective cote for corrosion resistnce ro en no ll - Alloy steel, het trete, hr chrome plte. notes - All sizes vilble with stus upon request. heck for vilbility Left hn units hve ientifiction groove ner en of shnk. 1 Tolernce vrition: D ±.020, A ± , ,, K ±.015, J ± Tolernce vrition: D ±.51, A ± , -.013, ±.25, K ±.38, J ±.38 3 Thres 1-14 UNS DIMENSIONS IN INES ±.015 K J ll i. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte Z Zerk type fitting F Flush type fitting thre unf-2 ril Sttic lo Ex: K-6Z Ex: K-6F K-3 KG , K-4 KG / , K-5 KG / , K-6 KG / , K-7 KG / , K-8 KG / , K-10 KG / , K-12 KG / , K-14 KG / , K-16 KG / , K-16-1 KG , K-16-2 KG , rg. t ro en no ±.38 ±.25 K ±.25 J ±.25 ll i thre unf-2 ril Sttic lo newtons K-3 KG , K-4 KG / , K-5 KG / , K-6 KG / , rg. t. Grms K-7 KG / , K-8 KG / , K-10 KG / , K-12 KG / , K-14 KG / , K-16 KG / , K-16-1 KG ,670 1,093 K-16-2 KG ,670 1,093 15

16 ro ens 1 1/4, 1 1/2 & 2 SizeS lrge ore SerieS mle ro ens Generl Purpose & igh Strength Precision er Resistnt (PTFE Liners Avilble) oy (K-Series) - Alloy steel, protective cote for corrosion resistnce. oy (-Series) - Alloy steel, het trete, protective cote for corrosion resistnce. rce steel, het trete, protective cote for corrosion resistnce. ll steel, het trete, protective cote for corrosion resistnce. 1 Tolernce vrition: 2 Thres 2-12 UN-3A Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: KM-24Z-1 F Flush type fitting Ex: KM-24F-1 T PTFE liner Ex: KM-24T-1 1 K-SerieS oy non et-trete ro en no ±.020 DIMENSIONS IN INES ±.040 ±.030 ll i thre unf-3 ril Sttic lo rg. t. Km-20-1 K / , Km-24-1 K / , Km-32-1 K , SerieS/Xm-SerieS oy et-trete ro en no ±.020 DIMENSIONS IN INES ±.040 ±.030 ll i thre unf-3 ril Sttic lo rg. t. m / , Xm-20-1 X , m / , Xm-24-1 X / , m ,

17 lrge ore SerieS femle ro ens Generl Purpose & igh Strength Precision er Resistnt (PTFE Liners Avilble) ro ens 1 1/4, 1 1/2 & 2 SizeS oy (K-Series) - Alloy steel, protective cote for corrosion resistnce. oy (-Series) - Alloy steel, het trete, protective cote for corrosion resistnce. rce steel, het trete, protective cote for corrosion resistnce. ll steel, het trete, protective cote for corrosion resistnce. 1 Tolernce vrition:, K ±.015, J ±.015, F ± Thres 2-12 UN-2 Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: K-24Z-1 F Flush type fitting Ex: K-24F-1 T PTFE liner Ex: K-24T-1 1 K-SerieS oy non et-trete ro en no ±.020 ±.040 DIMENSIONS IN INES ±.030 K ±.045 J ±.030 f ±.030 ll i thre unf-2 ril Sttic lo rg. t. K-20-1 KG / , K-24-1 KG / , K-32-1 KG , SerieS oy et-trete ro en no ±.020 ±.040 DIMENSIONS IN INES ±.030 K ±.045 J ±.030 f ±.030 ll i thre unf-2 ril Sttic lo rg. t G / , G / , G ,

18 ro ens 1 1/4, 1 1/2 & 2 SizeS lrge ore SerieS mle ro ens Generl Purpose & igh Strength Precision PTFE Line oy (m-series) - Alloy steel, protective cote for corrosion resistnce. oy (-Series) - Alloy steel, het trete, protective cote for corrosion resistnce. rce - rbon steel, PTFE line. ll - Alloy steel, het trete, hr chrome plte. 1 Thres 2-12 UN-3A m-series oy non et-trete ro en no ±.020 DIMENSIONS IN INES ±.040 ±.030 ll i thre unf-3 ril Sttic lo rg. t. mm-20t m-20t / , mm-24t m-24t / , mm-32t m-32t , SerieS oy et-trete 18 ro en no ±.020 DIMENSIONS IN INES ±.040 ±.030 ll i thre unf-3 ril Sttic lo rg. t. m-20t -20t / , m-24t -24t / , m-32t -32t ,

19 lrge ore SerieS femle ro ens Generl Purpose & igh Strength Precision PTFE Line ro ens 1 1/4, 1 1/2 & 2 SizeS oy (m-series) - Alloy steel, protective cote for corrosion resistnce. oy (-Series) - Alloy steel, het trete, protective cote for corrosion resistnce. rce - rbon steel, PTFE line. ll - Alloy steel, het trete, hr chrome plte. 1Thres 2-12 UN-2 m-series oy non et-trete ro en no ±.020 ±.040 DIMENSIONS IN INES ±.030 K ±.045 J ±.030 f ±.030 ll i thre unf-2 ril Sttic lo rg. t. m-20t mg-20t / , m-24t mg-24t / , m-32t mg-32t , SerieS oy et-trete ro en no ±.020 ±.040 DIMENSIONS IN INES ±.030 K ±.045 J ±.030 f ±.030 ll i thre unf-2 ril Sttic lo rg. t. -20t G-20t / , t G-24t / , t G-32t ,

20 m & SerieS mle ro ens igh Strength Economy Series oy - Alloy steel, het trete, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: AM-6Z F Flush type fitting Ex: AM-6F Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese consult our engineering eprtment. Grese fitting not vilble on this size. 20 ro en no DIMENSIONS IN INES ±.015 ll i thre unf-3 ril Sttic lo m / , m / , m / , m / , m / , m / , ro en no ll i thre unf-3 ril Sttic lo newtons m / , m / , m / , m / , m / , m / , rg. t. rg. t. Grms

21 Vm & V SerieS mle ro ens igh Strength Self Lubricting Economy Series oy - Alloy steel, het trete, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. ushing - Steel cke, PTFE omposite ro en no DIMENSIONS IN INES ±.015 ll i thre unf-3 ril Sttic lo Vm-5 V / , Vm-6 V / , Vm-7 V / , Vm-8 V / , Vm-10 V / , Vm-12 V / , rg. t. ro en no ll i thre unf-3 ril Sttic lo newtons Vm-5 V / , Vm-6 V / , Vm-7 V / , Vm-8 V / , Vm-10 V / , Vm-12 V / , rg. t. Grms 21

22 m & SerieS mle ro ens igh Strength Alloy Precision (PTFE Liners Avilble) oy - Alloy steel, het trete, protective cote for corrosion resistnce. rce - Alloy steel, het trete, protective cote for corrosion resistnce (rbon steel with PTFE Liners) heck for vilbility. 1 Tolernce vrition: D ±.020, A ±.020, , , heck for vilbility. 2 Tolernce vrition: D ±.51, A ±.51, , -.013, +.25 heck for vilbility. 3 Thres 1-14 UNS. ro en no DIMENSIONS IN INES ll i thre unf-3 ril Sttic lo m , m / , m / , m / , m / , m / , m / , m / , m / , m / , m / , m / , m , m , ro en no ±.25 ±.25 ll i. ll - Alloy steel, het trete, hr chrome plte. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: AM-6Z F Flush type fitting Ex: AM-6F T PTFE liner Ex: AM-6T Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese consult our engineering eprtment thre unf-3 ril Sttic lo newtons rg. t. rg. t. Grms m , m / , m / , m / , m / , m / , m / , m / , m / , m / , m / , m / ,937 1,091 m , m ,

23 & G SerieS femle ro ens igh Strength Alloy Precision (PTFE Liners Avilble) oy - Alloy steel, het trete, protective cote for corrosion resistnce. rce - Alloy steel, het trete, protective cote for corrosion resistnce (rbon steel with PTFE Liners) ro en no DIMENSIONS IN INES K J ll i thre unf-3 ril Sttic lo -3 G , G / , G / , G / , G / , G / , G / , G / , G / , G / , G , G , ro en no ll - Alloy steel, het trete, hr chrome plte. heck for vilbility. 1 Tolernce vrition: D ±.020, A , ,, K ±.015, J ±.015 heck for vilbility. 2 Tolernce vrition: D ±.51, A , -.013, ±.25, K ±.38, J +.38 heck for vilbility. 3 Thres 1-14 UNS 4 Notes 1 n 2 both hve UNF-2 thres ±.25 ±.25 K ±.25 J ±.25 ll i. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: A-6Z F Flush type fitting Ex: A-6F T PTFE liner Ex: A-6T thre unf-3 ril Sttic lo newtons -3 G , G / , G / , G / , rg. t. rg. t. Grms -7 G / , G / , G / , G / , G / , G / , G ,937 1, G ,937 1,093 23

24 m-et & -et SerieS StinleSS Steel mle ro ens orrosion Resistnt Precision Self Lubricting oy P stinless steel (AMS 5342). ll stinless steel (AMS 5630), het trete, hr chrome plte. ushing P stinless steel, het trete, PTFE line. ro en no DIMENSIONS IN INES ±.015 ll i thre unf-3 ril Sttic lo m-5et -5et / , m-6et -6et / , m-7et -7et / , m-8et -8et / , m-10et -10et / , m-12et -12et / , rg. t. 24 ro en no ll i thre unf-3 ril Sttic lo newtons m-5et -5et / , m-6et -6et / , m-7et -7et / , m-8et -8et / , m-10et -10et / , m-12et -12et / , rg. t. Grms

25 -et & G-et SerieS StinleSS Steel femle ro ens orrosion Resistnt Precision Self Lubricting oy P stinless steel (AMS 5342). ll stinless steel (AMS 5630), het trete, hr chrome plte. ushing P stinless steel, het trete, PTFE line. ro en no DIMENSIONS IN INES ±.015 K J ll i thre unf-2 ril Sttic lo -5et G-5et / , et G-6et / , et G-7et / , et G-8et / , et G-10et / , et G-12et / , rg. t. ro en no ±.38 K ±.25 J ±.25 ll i thre unf-2 ril Sttic lo newtons -5et G-5et / , et G-6et / , et G-7et / , et G-8et / , et G-10et / , et G-12et / , rg. t. Grms 25

26 Sm & S SerieS mle ro ens orrosion Resistnt Precision (PTFE Liners Avilble) oy - rbon steel, Electroless nickel plte. rce - Stinless steel, het trete. ll - Alloy steel, het trete, hr chrome plte. notes - All sizes vilble with stus upon request. Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese consult our engineering eprtment. ro en no DIMENSIONS IN INES ±.015 ll i. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: SM-6Z F Flush type fitting Ex: SM-6F T PTFE liner Ex: SM-6T thre unf-3 ril Sttic lo Sm-3 S , Sm-4 S / , Sm-5 S / , Sm-6 S / , Sm-7 S / , Sm-8 S / , Sm-10 S / , Sm-12 S / , rg. t. 26 ro en no ±.25 ll i thre unf-3 ril Sttic lo newtons Sm-3 S , Sm-4 S / , Sm-5 S / , Sm-6 S / , Sm-7 S / , Sm-8 S / , Sm-10 S / , Sm-12 S / , rg. t. Grms

27 S & SG SerieS femle ro ens orrosion Resistnt Precision (PTFE Liners Avilble) oy - rbon steel, Electroless nickel plte. rce - Stinless steel, het trete. ll - Alloy steel, het trete, hr chrome plte. notes - All sizes vilble with stus upon request. Left hn units hve ientifiction groove ner en of shnk. ro en no DIMENSIONS IN INES ±.015 K J Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: S-6Z F Flush type fitting Ex: S-6F T PTFE liner Ex: S-6T ll i thre unf-2 ril Sttic lo S-3 SG , S-4 SG / , S-5 SG / , S-6 SG / , S-7 SG / , S-8 SG / , S-10 SG / , S-12 SG / , rg. t. ro en no ±.38 ±.25 K ±.25 J ±.25 ll i thre unf-2 ril Sttic lo newtons S-3 SG , S-4 SG / , S-5 SG / , S-6 SG / , S-7 SG / , S-8 SG / , S-10 SG / , S-12 SG / , rg. t. Grms 27

28 Sm-e & S-e SerieS StinleSS Steel mle ro ens orrosion Resistnt Precision (PTFE Liners Avilble) 1 Tolernce vrition: D ±.020, A ±.020, , , 2 Tolernce vrition: D ±.51, A ±.51, +.089, -.013, ±.25 oy P stinless steel (AMS 5643), het trete. rce P stinless steel (AMS 5643), het trete. ll stinless steel (AMS 5630), het trete, hr chrome plte. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: SM-6EZ F Flush type fitting Ex: SM-6EF T PTFE liner Ex: SM-6ET Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese consult our engineering eprtment ro en no. ro en no DIMENSIONS IN INES ±.015 ±.38 ±.25 ll i. ll i thre unf-3 thre unf-3 ril Sttic lo Sm-3e S-3e , Sm-4e S-4e / , Sm-5e S-5e / , Sm-6e S-6e / , Sm-7e S-7e / , Sm-8e S-8e / , Sm-10e S-10e / , Sm-12e S-12e / , Sm-16e S-16e / , ril Sttic lo newtons rg. t. rg. t. Grms Sm-3e S-3e , Sm-4e S-4e / , Sm-5e S-5e / , Sm-6e S-6e / , Sm-7e S-7e / , Sm-8e S-8e / , Sm-10e S-10e / , Sm-12e S-12e / , Sm-16e S-16e / ,468 1,091

29 S-e & SG-e SerieS StinleSS Steel femle ro ens orrosion Resistnt Precision (PTFE Liners Avilble) oy P stinless steel (AMS 5643), het trete. rce P stinless steel (AMS 5643), het trete. ll stinless steel (AMS 5630), het trete, hr chrome plte. 1 Tolernce vrition: D ±. 020, A ±.020, , , ± Tolernce vrition: D ±. 51, A ±.51, , , ± Notes 1 n 2 both hve UNF-2 thres. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: S-6EZ F Flush type fitting Ex: S-6EF T PTFE liner Ex: S-6ET 1 2 ro en no. ro en no DIMENSIONS IN INES ±.015 ±.38 ±.25 K K ±.25 J J ±.25 ll i. ll i thre unf-3 thre unf-3 ril Sttic lo S-3e SG-3e , S-4e SG-4e / , S-5e SG-5e / , S-6e SG-6e / , S-7e SG-7e / , S-8e SG-8e / , S-10e SG-10e / , S-12e SG-12e / , S-16e SG-16e / , ril Sttic lo newtons S-3e SG-3e , S-4e SG-4e / , S-5e SG-5e / , S-6e SG-6e / , S-7e SG-7e / , S-8e SG-8e / , S-10e SG-10e / , S-12e SG-12e / , S-16e SG-16e / , rg. t. rg. t. Grms 29

30 ro en StuS notes: 1. Stu configurtion is shown s 2-piece mle, but is lso vilble in 2-piece femle, most 3-piece mle n femle configurtions, n the AI, MI, n SI sphericl bering configurtions. Stus re specificlly not vilble in the XAM n OM series. 2. Grese fittings re not vilble on the M-3S, M-4S, M-5S, or -3S ro ens. Units re supplie without grese fittings. hen grese fittings re require, specify by ing suffix Z or F. (ex.: M-8SZ) 3. The stnr grese fitting loction ( hn loction) is configure with the stu fcing wy from you while holing the ro en. If fitting must be oriente on the opposite sie of the ro en, specify the hn loction. 4. The ril sttic lo cpcity is bse on the sher strength of the stu. 5. Thre UN-2A 6. Stu sizes 3 through 12 re normlly stocke, size 2 n 16 re vilble on specil orer. Ro ens with stus instlle re normlly only stocke in the M/ series mle ro ens, n /G femle ro ens. Stus re instlle in ro ens of other series on specil orer bsis Stu Size l ±.015 DIMENSIONS IN INES n m ex Size thre unf Piece totl 3 - Piece totl ril Sttic lo N/A , , , , , N/A 42 8,178

31 Jm nuts Inch n Metric notes: 1. ex Jm Nuts re Gre 5 mteril (Meium crbon steel, quenche n tempere to 150,000 psi mximum). 2. Right hn three jm nuts re zinc plte cler n hn three jm nuts re zinc plte yellow. Jm nut no. Jm nut no. thre thre thre unf-2 DIMENSIONS IN INES f G Jnr-0332 Jnl Jnr-0428 Jnl Jnr-0524 Jnl Jnr-0624 Jnl Jnr-0720 Jnl Jnr-0820 Jnl Jnr-1018 Jnl Jnr-1216 Jnl Jnr-1414 Jnl Jnr-1612 Jnl Jnr-1614 Jnl Jnr-2012 Jnl Jnr-2412 Jnl Jnr-3212 Jnl thre thre thre -6 f G Jnr-m5 Jnl-m5 M5X Jnr-m6 Jnl-m6 M6X Jnrf-m8 Jnlf-m8 M8X Jnr-m8 Jnl-m8 M8X Jnrf-m10 Jnlf-m10 M10X Jnr-m10 Jnl-m10 M10X Jnrf-m12 Jnlf-m12 M12X Jnr-m12 Jnl-m12 M12X Jnrf-m14 Jnlf-m14 M14X Jnr-m14 Jnl-m14 M14X Jnrf-m16 Jnlf-m16 M16X Jnr-m16 Jnl-m16 M16X Jnrf-m20 Jnlf-m20 M20X Jnr-m20 Jnl-m20 M20X Jnr-m25 Jnl-m25 M24X Jnr-m30 Jnl-m30 M30X

32 ro en linkges Ajustble or Fixe enters eyon ro ens n sphericl berings for instlltion into customer components, Auror ering lso mnufctures linkges on specil orer bsis. Linkges cn be combine with mle or femle ro ens n the pproprite connector, resulting in linkges with justble centers, or the pproprite ro en or sphericl insert cn be incorporte into fixe length linkge. Linkges re not normlly stocke, n minimum orer quntities re require. Virtully ll Auror proucts, in inch or metric series, cn be incorporte in these custom engineere proucts. ontct Auror sles for further informtion. 32

33 m-m & -m SerieS mle ro ens metri ro ens Generl Purpose Economy oy - rbon steel, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. mle ro en no ±.40 ll i. ± 1.00 ll i. ± 1.00 thre thre ril Sttic lo newtons m-m3 -m M3 X ,775 7 m-m5 -m M5 X , m-m6 -m M6 X , m-m8 -m M8 X , m-m10 -m M10 X , m-m12 -m M12 X , m-m14 -m M14 X , m-m16 -m M16 X , m-m18 -m M18 X , m-m20 -m M20 X , femle ro en no m & G-m SerieS femle ro ens heck for vilbility. See pge 4. X Designtes metric thres. ±.40 K ±.25 J ±.25 Left hn units hve ientifiction groove ner en of shnk. Z Zerk type fitting - M-M10Z (Not vilble for 3, 5, 6, & 8). Z Zerk type fitting - -M10Z (Not vilble for 3 & 5) ril Sttic lo newtons rg. t. Grms -m3 G-m M3 X , m5 G-m M5 X , m6 G-m M6 X , m8 G-m M8 X , m10 G-m M10 X , m12 G-m M12 X , m14 G-m M14 X , m16 G-m M16 X , m18 G-m M18 X , m20 G-m M20 X , rg. t. Grms 33

34 mm-m & m-m SerieS mle ro ens - metri Generl Purpose Precision (PTFE Liners Avilble) heck for vilbility. See pge 4. X Designtes metric thres. 1 Tolernce vrition: D ±.51, A ±.51 oy - rbon steel, protective cote for corrosion resistnce. rce - rbon steel, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. Grese fitting not vilble on this size. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: MM-M10Z F Flush type fitting Ex: MM-M10F T PTFE Liner Ex: MM-M10T Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese consult our engineering eprtment ro en no ±.40 ±.38 ll i. ± 1.00 thre ril Sttic lo newtons rg. t. Grms mm-m3 m-m M3 X ,775 7 mm-m5 m-m M5 X , mm-m6 m-m M6 X , mmf-m8 mf-m M8 X , mm-m8 m-m M8 X , mmf-m10 mf-m M10 X , mm-m10 m-m M10 X , mmf-m12 mf-m M12 X , mm-m12 m-m M12 X , mmf-m14 mf-m M14 X , mm-m14 m-m M14 X , mmf-m16 mf-m M16 X , mm-m16 m-m M16 X , mm-m18 m-m M18 X , mmf-m20 mf-m M20 X , mm-m20 m-m M20 X , mm-m22 m-m M22 X , mm-m25 m-m M24 X , mm-m30 m-m M30 X ,238 1,090

35 m-m & mg-m SerieS femle ro ens - metri Generl Purpose Precision (PTFE Liners Avilble) oy - rbon steel, protective cote for corrosion resistnce. rce - rbon steel, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. heck for vilbility. See pge 4. X Designtes metric thres. Left hn units hve ientifiction groove. 1 Tolernce vrition: D ±.51, A ±.51 Grese fitting not vilble on this size. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: M-M10Z F Flush type fitting Ex: M-M10F T PTFE Liner Ex: M-M10T 1 ro en no ±.40 ±.38 K ±.25 J ±.25 ll i. ± 1.00 thre ril Sttic lo newtons m-m3 mg-m M3 X , m-m5 mg-m M5 X , m-m6 mg-m M6 X , mf-m8 mgf-m M8 X , m-m8 mg-m M8 X , mf-m10 mgf-m M10 X , m-m10 mg-m M10 X , mf-m12 mgf-m M12 X , m-m12 mg-m M12 X , mf-m14 mgf-m M14 X , m-m14 mg-m M14 X , mf-m16 mgf-m M16 X , m-m16 mg-m M16 X , m-m18 mg-m M18 X , mf-m20 mgf-m M20 X , m-m20 mg-m M20 X , m-m22 mg-m M22 X , m-m25 mg-m M24 X , m-m30 mg-m M30 X , rg. t. Grms 35

36 Km-m & K-m SerieS mle ro ens - metri er Resistnt Precision oy - rbon steel, protective cote for corrosion resistnce. rce - Alloy steel, het trete, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. heck for vilbility. See pge 4. X Designtes metric thres. 1 Tolernce vrition: D ±.51, A ±.51 Grese fitting not vilble on this size. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: KM-M10Z F Flush type fitting Ex: KM-M10F Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese consult our engineering eprtment. 36 ro en no ±.40 Km-m3 K-m M3 X ,775 7 Km-m5 K-m M5 X , Km-m6 K-m M6 X , Kmf-m8 Kf-m M8 X , Km-m8 K-m M8 X , Kmf-m10 Kf-m M10 X , Km-m10 K-m M10 X , Kmf-m12 Kf-m M12 X , Km-m12 K-m M12 X , Kmf-m14 Kf-m M14 X , Km-m14 K-m M14 X , Kmf-m16 Kf-m M16 X , Km-m16 K-m M16 X , Km-m18 K-m M18 X , Kmf-m20 Kf-m M20 X , Km-m20 Km-m22 Km-m25 Km-m30 K-m20 K-m22 K-m25 K-m M20 X M22 X M24 X M30 X ,952 56, , , ,090 ±.38 ll i. ± 1.00 thre ril Sttic lo newtons rg. t. Grms

37 K-m & KG-m SerieS femle ro ens - metri er resistnt Precision oy - rbon steel, protective cote for corrosion resistnce. rce - Alloy steel, het trete, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. heck for vilbility. See pge 4. X Designtes metric thres. Left hn units hve ientifiction groove. 1 Tolernce vrition: D ±.51, A ±.51 Grese fitting not vilble on this size. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: K-M10Z F Flush type fitting Ex: K-M10F 1 ro en no ±.40 ±.38 K ±.25 J ±.25 ll i. ± 1.00 thre ril Sttic lo newtons K-m3 KG-m M3 X , K-m5 KG-m M5 X , K-m6 KG-m M6 X , Kf-m8 KGf-m M8 X , K-m8 KG-m M8 X , Kf-m10 KGf-m M10 X , K-m10 KG-m M10 X , Kf-m12 KGf-m M12 X , K-m12 KG-m M12 X , Kf-m14 KGf-m M14 X , K-m14 KG-m M14 X , Kf-m16 KGf-m M16 X , K-m16 KG-m M16 X , K-m18 KG-m M18 X , Kf-m20 KGf-m M20 X , K-m20 KG-m M20 X , K-m22 KG-m M22 X , K-m25 KG-m M24 X , K-m30 KG-m M30 X , rg. t. Grms 37

38 m-m & -m SerieS mle ro ens - metri igh Strength Alloy Precision (PTFE Liners Avilble) oy - Alloy steel, het trete, protective cote for corrosion resistnce. rce - Alloy steel, het trete, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. heck for vilbility. See pge 4. X Designtes metric thres. 1 Tolernce vrition: D ±.51, A ±.51 Grese fitting not vilble on this size. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: AM-M10Z F Flush type fitting Ex: AM-M10F T PTFE Liner Ex: AM-M10T 38 1 ro en no ±.40 ±.38 ll i. ± 1.00 thre ril Sttic lo newtons rg. t. Grms m-m3 -m M3 X ,344 7 m-m5 -m M5 X , m-m6 -m M6 X , mf-m8 f-m M8 X , m-m8 -m M8 X , mf-m10 f-m M10 X , m-m10 -m M10 X , mf-m12 f-m M12 X , m-m12 -m M12 X , mf-m14 f-m M14 X , m-m14 -m M14 X , mf-m16 f-m M16 X , m-m16 -m M16 X , m-m18 -m M18 X , mf-m20 f-m M20 X , m-m20 -m M20 X , m-m22 -m M22 X , m-m25 -m M24 X , m-m30 -m M30 X ,331 1,090

39 -m & G-m SerieS femle ro ens - metri igh Strength Alloy Precision (PTFE Liners Avilble) oy - Alloy steel, het trete, protective cote for corrosion resistnce. rce - Alloy steel, het trete, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. heck for vilbility. See pge 4. X Designtes metric thres. 1 Tolernce vrition: D ±.51, A ±.51 Grese fitting not vilble on this size. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: A-M10Z F Flush type fitting Ex: A-M10F T PTFE Liner Ex: A-M10T ro en no ±.40 ±.38 K ±.25 J ±.25 ll i. ± 1.00 thre ril Sttic lo newtons -m3 G-m M3 X , m5 G-m M5 X , m6 G-m M6 X , f-m8 Gf-m M8 X , m8 G-m M8 X , f-m10 Gf-m M10 X , m10 G-m M10 X , f-m12 Gf-m M12 X , m12 G-m M12 X , f-m14 Gf-m M14 X , m14 G-m M14 X , f-m16 Gf-m M16 X , m16 G-m M16 X , m18 G-m M18 X , f-m20 Gf-m M20 X , m20 G-m M20 X , m22 G-m M22 X , m25 G-m M24 X , m30 G-m M30 X , rg. t. Grms 1 39

40 om-m SerieS SPeril erings - metri (PTFE Liners Avilble) 1 1 outer member - rbon steel, protective cote for corrosion resistnce. rce - rbon steel, I.D. protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. heck for vilbility. 1 PTFE Liners use suffix T Ex: OM-M10T. PTFE line prts o not hve lubriction groove in rce. 2 se upon mximum permnent set of.5% of bll O.D. (See pge 4) 40 ering no o flt i m hmfer ll i ril Sttic limit lo newtons 2 om-m ,758 4 om-m ,555 9 om-m , om-m , om-m , om-m , om-m , om-m , om-m , om-m , om-m , om-m , om-m , rg. t. Grms

41 om & om SerieS SPeril erings (PTFE Liners Avilble) 1 rce - rbon steel, I.D. protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. ering no ore tolernce on these items is s follows - IN: , ; METRI: +.064, DIMENSIONS IN INES o flt i 1 PTFE Liners use suffix T Ex: OM-10T 2 PTFE Line prts hve no lubriction groove in rce. ole mnufctures option. m hmfer ll i ril Sttic limit lo om , om , om , om , om , om , om , om , om , om , om , rg. t. om , om , om , om , om , om , ering no o flt i m hmfer ll i ril Sttic limit lo om ,464 6 om , om , om , om , om , om , om , om , om , om , rg. t. Grms om , om , om , om , om , om ,485 1,198 41

42 om-k & om-k SerieS SPeril erings (PTFE Liners Avilble) 1 rce - Alloy steel, het trete, I.D. protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. heck for vilbility ore tolernce on these items is s follows - IN: , ; METRI: +.064, ering no DIMENSIONS IN INES o flt i 1 PTFE Liners use suffix T Ex: OM-6TK 2 PTFE Line prts hve no lubriction groove in rce. ole mnufctures option. m hmfer ll i ril Sttic limit lo om-3k , om-4k , om-5k , om-6k , om-7k , om-8k , om-9k , om-10k , om-12k , om-14k , om-16k , rg. t. 42 om-16k , om-19k , om-20k , om-24k , om-28k , om-32k , ering no o flt i m hmfer ll i ril Sttic limit lo newtons om-3k ,701 6 om-4k , om-5k , om-6k , om-7k , om-8k , om-9k , om-10k , om-12k , om-14k , om-16k , rg. t. Grms om-16k , om-19k , om-20k , om-24k , om-28k ,176, om-32k ,448,228 1,198

43 om-e SerieS SPeril erings (PTFE Liners Avilble) 1 rce P stinless steel (AMS 5643), het trete. ll stinless steel (AMS 5630), het trete, chrome plte. heck for vilbility on ll sizes. ering no DIMENSIONS IN INES o flt i m hmfer 1 PTFE Liners use suffix T Ex: OM-6ET 2 PTFE Line prts hve no lubriction groove in rce. ole mnufctures option. ll i ril Sttic limit lo om-3e , om-4e , om-5e , om-6e , om-7e , om-8e , om-9e , om-10e , om-12e , om-14e , om-16e , rg. t. ering no o flt i m hmfer ll i ril Sttic limit lo newtons om-3e ,701 6 om-4e , om-5e , om-6e , om-7e , om-8e , om-9e , om-10e , om-12e , om-14e , om-16e , rg. t. Grms 43

44 lom SerieS lrge Size SPeril erings (PTFE Liners Avilble) 1 tese erings not normlly StoKe - ek for Vilility. ering no DIMENSIONS IN INES o flt i m hmfer ll i outer member - rbon steel, protective cote for corrosion resistnce. rce - rbon steel, expose surfces fter instlltion protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. 1 PTFE Liners use suffix T Ex: LOM-6T 2 PTFE Line prts hve no lubriction groove in rce. ril Sttic limit lo lom , lom , lom , lom , lom , lom , lom , lom , lom , lom , lom , lom , lom , rg. t. 44 ering no o flt i m hmfer ll i ril Sttic limit lo newtons rg. t. Grms lom ,509 9 lom , lom , lom , lom , lom , lom , lom , lom , lom , lom , lom ,000 1,080 lom ,826 1,701

45 i, Si, n mi SerieS Sphericl erings (PTFE Liners Avilble) 1 Series mi i Si ll Alloy steel, het trete, hr chrome plte. Alloy steel, het trete, hr chrome plte. Alloy steel, het trete, hr chrome plte. ore Tolernce on these items is s follows - IN: , ; METRI: +.089, rce rbon steel, I.D. protective cote for corrosion resistnce, oil cote. Alloy steel, het trete, I.D. protective cote for corrosion resistnce, oil cote. Stinless steel, het trete, oil cote. 1 PTFE Liners use suffix T Ex: AI-6T 2 PTFE Line prts hve no lubriction groove in rce. ole mnufctures option. ering no DIMENSIONS IN INES o flt i. m hmfer ll i. ril Sttic limit lo i-3 Si-3 mi ,370 6, i-4 Si-4 mi ,620 8, i-5 Si-5 mi ,600 12, i-6 Si-6 mi ,677 17, i-7 Si-7 mi ,194 21, i-8 Si-8 mi ,740 28, i-10 Si-10 mi ,290 37, i-12 Si-12 mi ,448 48, i-14 Si-14 mi ,653 58, i-16 Si-16 mi ,000 90, mi i-si rg. t. ering no o flt i. m hmfer ll i. ril Sttic limit lo newtons i-3 Si-3 mi ,438 29,157 7 i-4 Si-4 mi ,998 37, i-5 Si-5 mi ,253 57, i-6 Si-6 mi ,939 77, i-7 Si-7 mi ,135 94, i-8 Si-8 mi , , i-10 Si-10 mi , , i-12 Si-12 mi , , i-14 Si-14 mi , , i-16 Si-16 mi , , mi i-si rg. t. Grms 45

46 SPeril Plin erings Inch Open & Sele Gez..eS open Gez..eS-2rS Sele Gez..eS open Gez..eS-2rS Sele rce steel, het trete, protective cote for corrosion resistnce. ll steel, het trete, protective cote for corrosion resistnce. ril Stti lo Pity These los re the mximum sfe operting los for sttionry pplictions, n ssumes sufficiently rigi housing n shft. The ril sttic lo cpcity provies 1.5 fctor of sfety ginst sttic frcture. lurition erings shoul only be use s elivere for sttic pplictions. For ynmic pplictions, lithium-bse grese with EP n MOS 2 itives is especilly suitble. Lubricnts of this type re recommene for operting tempertures between -40 F n F (-40 n +121 ). For operting tempertures outsie of this rnge, consult lubricnt mnufcturer. erings shoul be equtely lubricte before instlltion, n relubricte t suitble intervls bse on ppliction emns. Demn fctors inclue lo n lo irection, mislignment n frequency, mbient temperture n contmintion level. 46 ering no. open Sele ore i. rce i. DIMENSIONS IN INES ll ith rce ith o flt i. ll mfr. m rce mfr. mx. min. mx. min. mx. min. mx. min. min. min. min. ril Sttic limit lo rg. t. Gez008eS , Gez010eS , Gez012eS Gez012eS-2rS , Gez014eS Gez014eS-2rS , Gez016eS Gez016eS-2rS , Gez020eS Gez020eS-2rS , Gez022eS Gez022eS-2rS , Gez024eS Gez024eS-2rS , Gez028eS Gez028eS-2rS , Gez032eS Gez032eS-2rS , Gez036eS Gez036eS-2rS , Gez040eS Gez040eS-2rS , Gez044eS Gez044eS-2rS , Gez048eS Gez048eS-2rS , Gez052eS Gez052eS-2rS , Gez056eS Gez056eS-2rS , Gez060eS Gez060eS-2rS , Gez064eS Gez064eS-2rS , Gez068eS Gez068eS-2rS , Gez072eS Gez072eS-2rS , Gez076eS Gez076eS-2rS , Gez080eS Gez080eS-2rS , Gez096eS Gez096eS-2rS ,168,

47 SPeril Plin erings Metric Open & Sele Ge..eS open Ge..eS-2rS Sele rce steel, het trete, protective cote for corrosion resistnce. ll steel, het trete, protective cote for corrosion resistnce. Ge..eS open Ge..eS-2rS Sele ril Stti lo Pity These los re the mximum sfe operting los for sttionry pplictions, n ssumes sufficiently rigi housing n shft. The ril sttic lo cpcity provies 1.5 fctor of sfety ginst sttic frcture lurition erings shoul only be use s elivere for sttic pplictions. For ynmic pplictions, lithium-bse grese with EP n MOS 2 itives is especilly suitble. Lubricnts of this type re recommene for operting tempertures between -40 F n F (-40 n +121 ). For operting tempertures outsie of this rnge, consult lubricnt mnufcturer. erings shoul be equtely lubricte before instlltion, n relubricte t suitble intervls bse on ppliction emns. Demn fctors inclue lo n lo irection, mislignment n frequency, mbient temperture n contmintion level. GE-12E only vilble without lube grooves n holes. Double frcture ering no. open Sele ore i. rce i. ll ith rce ith o flt i. ll mfr. m rce mfr. mx. min. mx. min. mx. min. mx. min. min. min. min. ril Sttic limit lo kn rg. t. Grms Ge12e Ge15eS Ge15eS-2rS Ge17eS Ge17eS-2rS Ge20eS Ge20eS-2rS Ge25eS Ge25eS-2rS Ge30eS Ge30eS-2rS Ge35eS Ge35eS-2rS Ge40eS Ge40eS-2rS Ge45eS Ge45eS-2rS Ge50eS Ge50eS-2rS Ge60eS Ge60eS-2rS ,220 1,040 Ge70eS Ge70eS-2rS ,560 1,550 Ge80eS Ge80eS-2rS ,000 2,310 Ge90eS Ge90eS-2rS ,440 2,750 Ge100eS Ge100eS-2rS ,030 4,450 Ge110eS Ge110eS-2rS ,270 4,820 Ge120eS Ge120eS-2rS ,750 8,050 Ge140eS Ge140eS-2rS ,355 11,020 Ge160eS Ge160eS-2rS ,800 14,010 47

48 SPeril Plin erings Inch Sele PTFE Line Gez..et-2rS Sele rce steel, het trete, single frcture, PTFE line. ll steel, het trete, hr chrome plte. ril Stti lo Pity These los re the mximum sfe operting los for sttionry pplictions, n ssumes sufficiently rigi housing n shft. The ril sttic lo cpcity provies 1.5 fctor of sfety ginst sttic frcture. lurition Self lubricting PTFE liner. 48 ering no. Sele ore i. rce i. DIMENSIONS IN INES ll ith rce ith o flt i. ll mfr. m rce mfr. ril Sttic limit lo rg. t. mx. min. mx. min. mx. min. mx. min. min. min. min. Gez012et-2rS , Gez014et-2rS , Gez016et-2rS , Gez020et-2rS , Gez022et-2rS , Gez024et-2rS , Gez028et-2rS , Gez032et-2rS , Gez036et-2rS , Gez040et-2rS , Gez044et-2rS , Gez048et-2rS , Gez052et-2rS , Gez056et-2rS , Gez060et-2rS , Gez064et-2rS , Gez068et-2rS , Gez072et-2rS , Gez076et-2rS , Gez080et-2rS , Gez096et-2rS ,177,

49 SPeril Plin erings Metric Sele PTFE Line Ge..et-2rS Sele rce steel, het trete, single frcture, PTFE line. ll steel, het trete, hr chrome plte. ril Stti lo Pity These los re the mximum sfe operting los for sttionry pplictions, n ssumes sufficiently rigi housing n shft. The ril sttic lo cpcity provies 1.5 fctor of sfety ginst sttic frcture. lurition Self lubricting PTFE liner. Prts 140mm n bove hve ouble frcture rce. ering no. Sele ore i. rce i. ll ith rce ith o flt i. ll mfr. m rce mfr. ril Sttic limit lo kn rg. t. Grms mx. min. mx. min. mx. min. mx. min. min. min. min. Ge15et-2rS Ge17et-2rS Ge20et-2rS Ge25et-2rS Ge30et-2rS Ge35et-2rS Ge40et-2rS Ge45et-2rS Ge50et-2rS Ge60et-2rS ,040 Ge70et-2rS ,550 Ge80et-2rS ,140 2,310 Ge90et-2rS ,370 2,750 Ge100et-2rS ,730 4,450 Ge110et-2rS ,860 4,820 Ge120et-2rS ,700 8,050 Ge140Xt-2rS ,000 11,020 Ge160Xt-2rS ,800 14,010 49

50 SPERIAL PLAIN EARINGS evy Duty Inch Open & Sele GeGz..eS open GeGz..eS-2rS Sele GeGz..eS open GeGz..eS-2rS Sele rce steel, het trete, protective cote for corrosion resistnce. ll steel, het trete, protective cote for corrosion resistnce. ril Stti lo Pity These los re the mximum sfe operting los for sttionry pplictions, n ssumes sufficiently rigi housing n shft. The ril sttic lo cpcity provies 1.5 fctor of sfety ginst sttic frcture. lurition erings shoul only be use s elivere for sttic pplictions. For ynmic pplictions, lithium-bse grese with EP n MOS 2 itives is especilly suitble. Lubricnts of this type re recommene for operting tempertures between -40 F n F (-40 n +121 ). For operting tempertures outsie of this rnge, consult lubricnt mnufcturer. erings shoul be equtely lubricte before instlltion, n relubricte t suitble intervls bse on ppliction emns. Demn fctors inclue lo n lo irection, mislignment n frequency, mbient temperture n contmintion level. 50 ering no. open Sele ore i. rce i. DIMENSIONS IN INES ll ith rce ith o flt i. ll mfr. m rce mfr. mx. min. mx. min. mx. min. mx. min. min. min. min. ril Sttic limit lo rg. t. GeGz020eS GeGz020eS-2rS , GeGz024eS GeGz024eS-2rS , GeGz028eS GeGz028eS-2rS , GeGz032eS GeGz032eS-2rS , GeGz036eS GeGz036eS-2rS , GeGz040eS GeGz040eS-2rS , GeGz044eS GeGz044eS-2rS , GeGz048eS GeGz048eS-2rS , GeGz052eS GeGz052eS-2rS , GeGz056eS GeGz056eS-2rS , GeGz060eS GeGz060eS-2rS , GeGz064eS GeGz064eS-2rS , GeGz072eS GeGz072eS-2rS , GeGz088eS GeGz088eS-2rS ,168,

51 SPERIAL PLAIN EARINGS evy Duty Metric Open & Sele GeG..eS open GeG..eS-2rS Sele rce steel, het trete, protective cote for corrosion resistnce. ll steel, het trete, protective cote for corrosion resistnce. GeG..eS open GeG..eS-2rS Sele ril Stti lo Pity These los re the mximum sfe operting los for sttionry pplictions, n ssumes sufficiently rigi housing n shft. The ril sttic lo cpcity provies 1.5 fctor of sfety ginst sttic frcture lurition erings shoul only be use s elivere for sttic pplictions. For ynmic pplictions, lithium-bse grese with EP n MOS 2 itives is especilly suitble. Lubricnts of this type re recommene for operting tempertures between -40 F n F (-40 n +121 ). For operting tempertures outsie of this rnge, consult lubricnt mnufcturer. erings shoul be equtely lubricte before instlltion, n relubricte t suitble intervls bse on ppliction emns. Demn fctors inclue lo n lo irection, mislignment n frequency, mbient temperture n contmintion level. ering no. open Sele ore i. rce i. ll ith rce ith o flt i. ll mfr. m rce mfr. mx. min. mx. min. mx. min. mx. min. min. min. min. ril Sttic limit lo kn rg. t. Grms GeG12e GeG15eS GeG15eS-2rS GeG17eS GeG17eS-2rS GeG20eS GeG20eS-2rS GeG25eS GeG25eS-2rS GeG30eS GeG30eS-2rS GeG35eS GeG35eS-2rS GeG40eS GeG40eS-2rS GeG45eS GeG45eS-2rS GeG50eS GeG50eS-2rS ,220 1,420 GeG60eS GeG60eS-2rS ,560 2,090 GeG70eS GeG70eS-2rS ,000 3,010 GeG80eS GeG80eS-2rS ,440 3,610 GeG90eS GeG90eS-2rS ,030 5,500 GeG100eS GeG100eS-2rS ,270 6,040 GeG110eS GeG110eS-2rS ,750 9,740 GeG120eS GeG120eS-2rS ,350 15,100 GeG140eS GeG140eS-2rS ,800 18,900 GeG160eS GeG160eS-2rS ,650 24,800 51

52 SPERIAL PLAIN EARINGS Extene ith ll Inch Open & Sele Gez..eS open Gez..eS-2rS Sele Gez..eS open Gez..eS-2rS Sele rce steel, het trete, protective cote for corrosion resistnce. ll steel, het trete, protective cote for corrosion resistnce. ril Stti lo Pity These los re the mximum sfe operting los for sttionry pplictions, n ssumes sufficiently rigi housing n shft. The ril sttic lo cpcity provies 1.5 fctor of sfety ginst sttic frcture. lurition erings shoul only be use s elivere for sttic pplictions. For ynmic pplictions, lithium-bse grese with EP n MOS 2 itives is especilly suitble. Lubricnts of this type re recommene for operting tempertures between -40 F n F (-40 n +121 ). For operting tempertures outsie of this rnge, consult lubricnt mnufcturer. erings shoul be equtely lubricte before instlltion, n relubricte t suitble intervls bse on ppliction emns. Demn fctors inclue lo n lo irection, mislignment n frequency, mbient temperture n contmintion level. 52 ering no. open Sele ore i. rce i. DIMENSIONS IN INES ll ith rce ith o flt i. ll mfr. m rce mfr. mx. min. mx. min. mx. min. mx. min. min. min. min. ril Sttic limit lo rg. t. Gez008eS Gez008eS-2rS , Gez010eS Gez010eS-2rS , Gez012eS Gez012eS-2rS , Gez014eS Gez014eS-2rS , Gez016eS Gez016eS-2rS , Gez020eS Gez020eS-2rS , Gez022eS Gez022eS-2rS , Gez024eS Gez024eS-2rS , Gez028eS Gez028eS-2rS , Gez032eS Gez032eS-2rS , Gez036eS Gez036eS-2rS , Gez040eS Gez040eS-2rS , Gez044eS Gez044eS-2rS , Gez048eS Gez048eS-2rS , Gez052eS Gez052eS-2rS , Gez056eS Gez056eS-2rS , Gez060eS Gez060eS-2rS , Gez064eS Gez064eS-2rS , Gez072eS Gez072eS-2rS , Gez080eS Gez080eS-2rS , Gez096eS Gez096eS-2rS ,168,

53 SPERIAL PLAIN EARINGS Extene ith ll Metric Open & Sele Gee..eS open Gee..eS-2rS Sele rce steel, het trete, protective cote for corrosion resistnce. ll steel, het trete, protective cote for corrosion resistnce. ril Stti lo Pity These los re the mximum sfe operting los for sttionry pplictions, n ssumes sufficiently rigi housing n shft. The ril sttic lo cpcity provies 1.5 fctor of sfety ginst sttic frcture lurition erings shoul only be use s elivere for sttic pplictions. For ynmic pplictions, lithium-bse grese with EP n MOS 2 itives is especilly suitble. Lubricnts of this type re recommene for operting tempertures between -40 F n F (-40 n +121 ). For operting tempertures outsie of this rnge, consult lubricnt mnufcturer. erings shoul be equtely lubricte before instlltion, n relubricte t suitble intervls bse on ppliction emns. Demn fctors inclue lo n lo irection, mislignment n frequency, mbient temperture n contmintion level. ering no. open Sele ore i. rce i. ll ith rce ith o flt i. ll mfr. m rce mfr. mx. min. mx. min. mx. min. mx. min. min. min. min. ril Sttic limit lo kn rg. t. Grms Gee12eS Gee15eS Gee15eS-2rS Gee16eS Gee16eS-2rS Gee17eS Gee17eS-2rS Gee20eS Gee20eS-2rS Gee25eS Gee25eS-2rS Gee30eS Gee30eS-2rS Gee32eS Gee32eS-2rS Gee35eS Gee35eS-2rS Gee40eS Gee40eS-2rS Gee45eS Gee45eS-2rS Gee50eS Gee50eS-2rS Gee60eS Gee60eS-2rS ,220 1,110 Gee63eS Gee63eS-2rS ,260 1,270 Gee70eS Gee70eS-2rS ,560 1,690 Gee80eS Gee80eS-2rS ,000 2,550 Gee90eS Gee90eS-2rS ,440 3,040 Gee100eS Gee100eS-2rS ,030 4,870 Gee110eS Gee110eS-2rS ,270 5,530 Gee125eS Gee125eS-2rS ,750 8,190 Gee160eS Gee160eS-2rS ,800 15,800 Gee200eS Gee200eS-2rS ,600 31,700 Gee250eS Gee250eS-2rS , ,000 Gee320eS Gee320eS-2rS , ,000 53

54 ANGULAR ONTAT SPERIAL PLAIN EARINGS Inch Gz..S open rce steel, het trete, protective cote for corrosion resistnce ll steel, het trete, protective cote for corrosion resistnce. lurition erings shoul only be use s elivere for sttic pplictions. For ynmic pplictions, lithium-bse grese with EP n MOS 2 itives is especilly suitble. Lubricnts of this type re recommene for operting tempertures between -40 F n F (-40 n +121 ). For operting tempertures outsie of this rnge, consult lubricnt mnufcturer. erings shoul be equtely lubricte before instlltion, n relubricte t suitble intervls bse on ppliction emns. Demn fctors inclue lo n lo irection, mislignment n frequency, mbient temperture n contmintion level. 54 ering no. DIMENSIONS IN INES Sttic thrust t Sphericl S,m i. loc. en to ll, rce lo rg. t. open ore i. rce i. ll ith rce ith Shere ole mfr. i. mx. min. mx. min. mx. min. mx. min. min. Gz008S , Gz010S , Gz012S , Gz014S , Gz016S , Gz020S , Gz022S , Gz024S , Gz028S , Gz032S , Gz036S , Gz040S , Gz044S , Gz048S , Gz052S , Gz056S , Gz060S , Gz064S , Gz072S , Gz080S , Gz096S ,

55 ANGULAR ONTAT SPERIAL PLAIN EARINGS Metric G..S open rce steel, het trete, protective cote for corrosion resistnce. ll steel, het trete, protective cote for corrosion resistnce. lurition erings shoul only be use s elivere for sttic pplictions. For ynmic pplictions, lithium-bse grese with EP n MOS 2 itives is especilly suitble. Lubricnts of this type re recommene for operting tempertures between -40 F n F (-40 n +121 ). For operting tempertures outsie of this rnge, consult lubricnt mnufcturer. erings shoul be equtely lubricte before instlltion, n relubricte t suitble intervls bse on ppliction emns. Demn fctors inclue lo n lo irection, mislignment n frequency, mbient temperture n contmintion level. ering no. Sttic thrust t Sphericl S,m i. loc. en to ll, rce lo rg. t. open ore i. rce i. ll ith rce ith Shere ole mfr. Grms i. kn mx. min. mx. min. mx. min. mx. min. min. G25S G28S G30S G32S G35S G40S G45S G50S G55S G60S G65S G70S ,030 1,040 G75S ,129 1,120 G80S ,290 1,540 G85S ,422 1,610 G90S ,580 2,090 G95S ,750 2,220 G100S ,923 2,340 G105S ,116 2,930 G110S ,318 3,680 G120S ,735 3,970 G130S ,550 5,920 G140S ,740 6,330 G150S ,270 8,010 G160S ,850 9,790 G170S ,950 12,300 G180S ,970 17,400 G190S ,500 18,200 G200S ,420 23,800 55

56 ANGULAR ONTAT SPERIAL PLAIN EARINGS Metric PTFE Line G..t 56 ering no. lurition Self lubricting PTFE liner. rce steel, het trete, PTFE line. ll steel, het trete, hr chrome plte. Sttic thrust lo kn rg. t. Grms open t Sphericl S,m i. loc. ll, rce ore i. rce i. ll ith rce ith Shere mfr. mx. min. mx. min. mx. min. mx. min. i. min. G25t G28t G30t G32t G35t G40t G45t G50t G55t G60t G65t G70t ,040 G75t ,120 G80t ,120 1,540 G85t ,240 1,610 G90t ,380 2,090 G95t ,530 2,220 G100t ,680 2,340 G105t ,850 2,930 G110t ,020 3,680 G120t ,390 3,970 G130t ,110 5,920 G140t ,270 6,330 G150t ,730 8,010 G160t ,240 9,790 G170t ,200 12,300 G180t ,100 17,400 G190t ,560 18,200 G200t ,360 23,800

57 FRATURE RAE EARINGS INTERANGE GUIE Also known s split rce berings or light series berings These types of berings re first n foremost intene for sttic situtions where potentil mislignments exist tht cn not be ccommote by plne bushings or clevises n pins. hile these berings re most commonly use in pplictions with hevy sttic los with initil or ssembly mislignment, they re lso use for ynmic pplictions with slow ynmic mislignment, either pivotl, rottionl, or combintion. For ynmic pplictions subject to regulr mislignment, full swge bering such s the OM series is recommene. U = Approximte bore in inches. (ex. 5 =.5, 15 = 1.5 ) V = elow 1, ore in 1/16. Above 1 bore in whole inch + frction in 1/16 (ex. 8 = 1/2, 108 = 1 1/2 ) = ore is nerest metric equivlent for inch size. (ex. 12 =.5,.5 = 12.7 mm.) X = ore in 1/16. (ex. 8 = 1/2, 1/2 = 8/16 ) Y = ore in mm. (ex. 20 = 20mm.) Y= OD in mm. Y= ore in mm. + bore of next size prt offere (ex = 20mm. bore, 25mm is bore of next lrger size prt offere) Tble to be use s reference guie. Ultimte interchngebility shoul be etermine by compring relevnt mnufcturers specifictions. These re just some of the bering styles n configurtions offere by Auror. Aitionl configurtions inclue specil sizes, PTFE liners,stinless Steel, very lrge bore prts, n more. Plese consult fctory for further informtion, specifictions, n interchnges to prt numbers/mnufcturers not liste. 57

58 SuGGeSte ousing ores Sphericl Plin erings iso 7 - Fit recommene for light los where xil isplcement is require fter instlltion. iso m7 - Press fit where bering is subjecte to combintion, reversing, or shock los. iso n7 - Recommene fit when using light lloy housing (i.e. luminum). extr evy PreSS fit - Recommene fit for pplictions with extreme shock los tht cn lso tolerte elevte brekwy torques. A sufficiently rigi housing is ssume. tbles re representtive of metl to metl prts, plese consult our engineering eprtment regring Ptfe line prts. for GeG, GeGz, Ge, Gez, G, Gz series, consult fctory 58 ering SerieS Gez..eS Gez..eS..2rS A DIMENSIONS IN INES Suggeste ousing ore For Press Fit of Sphericl Plin erings ering outsie imeter iso 7 iso m7 iso n7 extr evy Press fit mx. min. mx. min. mx. min. mx. min. mx. min ering SerieS Ge..eS Ge..eS..2rS A Suggeste ousing ore For Press Fit of Sphericl Plin erings ering outsie imeter iso 7 iso m7 iso n7 extr evy Press fit mx. min. mx. min. mx. min. mx. min. mx. min

59 SuGGeSte ousing ores OM, OM, MI, AI & SI Sphericl erings ering SerieS om om mx. min. mx. min ering SerieS om om A ering outsie imeter A ering outsie imeter om & om Series DIMENSIONS IN INES Suggeste ousing ore For Press Fit of Sphericl erings Steel ousing mx. min. mx. luminum ousing Suggeste ousing ore For Press Fit of Sphericl erings Steel ousing luminum ousing min Dimensions given in the tbles below re for berings fbricte of stnr rce mterils. Shoul other mterils be use, consult our engineering eprtment for moifiction of these imensions. tbles re representtive of metl to metl prts, plese consult our engineering eprtment regring Ptfe line prts. ering SerieS mi i Si ering outsie imeter mi, i & Si Series DIMENSIONS IN INES Suggeste ousing ore For Press Fit of Sphericl erings Steel ousing mx. min. mx. luminum ousing min ering SerieS mi i Si A A ering outsie imeter Suggeste ousing ore For Press Fit of Sphericl erings Steel ousing mx. min. mx. luminum ousing min

60 SuGGeSte ousing ores LOM & OM-M Sphericl erings ering SerieS lom A ering outsie imeter lom SerieS DIMENSIONS IN INES Suggeste ousing ore For Press Fit of Sphericl erings Steel ousing mx. min. mx. luminum ousing min these tbles re representtive of metl to metl prts, plese consult our engineering eprtment regring Ptfe line prts. ering SerieS om-m A ering outsie imeter om-m SerieS DIMENSIONS IN INES Suggeste ousing ore For Press Fit of Metric Sphericl erings Steel ousing luminum ousing mx. min. mx. min ering SerieS lom A ering outsie imeter Suggeste ousing ore For Press Fit of Sphericl erings Steel ousing luminum ousing mx. min. mx. min ering SerieS om-m A ering outsie imeter Suggeste ousing ore For Press Fit of Metric Sphericl erings Steel ousing luminum ousing mx. min. mx. min

61 SerieS ll ering, Self-ligning Ro Ens ousing mteril - utile iron onsult our Engineering Deprtment for lo rtings n RPM informtion. Shft i. unit no. DIMENSIONS IN INES e f G J K o thre Size rg. t. 1/ / /8 2 1/16 5/8 7/ /16 11/16 11/16 3/ /32 1/2-20 UNF.63 5/ / /8 2 1/16 5/8 7/ /16 11/16 11/16 3/ /32 1/2-20 UNF.63 3/ / /2 2 1/4 23/32 3/ /16 3/4 3/4 13/ /32 1/2-13 UN.75 heck for vilbility. Shft i. unit no. e f G J K o thre Size rg. t. 1/ /2-20 UNF 284 5/ /2-20 UNF 284 3/ /2-13 UN

62 Xm & X SerieS mle ro ens Extr Strength evy Duty Shnk (PTFE Liners Avilble) Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese consult our engineering eprtment. oy - rbon steel, protective cote for corrosion resistnce. rce - Alloy steel, het trete protective cote for corrosion resistnce. (rbon steel with PTFE liners.) ll - Alloy steel, het trete, hr chrome plte. notes - All sizes vilble with stus upon request. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: XM-6Z F Flush type fitting Ex: XM-6F T PTFE Liner Ex: XM-6T ro en no DIMENSIONS IN INES ±.015 ll i thre unf-3 ril Sttic lo Xm-3 X / , Xm-4 X / , Xm-5 X / , Xm-6 X / , Xm-7 X / , Xm-8 X / , Xm-10 X / , Xm-12 X / , Xm-12-1 X / , Xm-14-1 X / , rg. t. 62 ro en no ±.38 ±.25 ll i thre unf-3 ril Sttic lo newtons Xm-3 X / , Xm-4 X / , Xm-5 X / , Xm-6 X / , Xm-7 X / , Xm-8 X / , Xm-10 X / , Xm-12 X / , Xm-12-1 X / , Xm-14-1 X / , rg. t. Grms

63 Xm & X SerieS mle ro ens igh Strength Alloy evy Duty Shnk (PTFE Liners Avilble) oy - Alloy steel, het trete, protective cote for corrosion resistnce. rce - Alloy steel, het trete protective cote for corrosion resistnce. (rbon steel with PTFE liners.) ll - Alloy steel, het trete, hr chrome plte. notes - All sizes vilble with stus upon request. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: XAM-6Z F Flush type fitting Ex: XAM-6F T PTFE Liner Ex: XAM-6T Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese consult our engineering eprtment. ro en no DIMENSIONS IN INES ±.015 ll i thre unf-3 ril Sttic lo Xm-3 X / , Xm-4 X / , Xm-5 X / , Xm-6 X / , Xm-7 X / , Xm-8 X / , Xm-10 X / , Xm-12 X / , rg. t. ro en no ±.38 ±.25 ll i thre unf-3 ril Sttic lo newtons Xm-3 X / , Xm-4 X / , Xm-5 X / , Xm-6 X / , Xm-7 X / , Xm-8 X / , Xm-10 X / , Xm-12 X / , rg. t. Grms 63

64 rm, r, rxm, rx SerieS mle ro ens igh Strength Alloy (PTFE Liners Avilble) rm rxm oy - Alloy steel, het trete, nickel or chrome plte. rce - Alloy steel, het trete, nickel plte. ll - Alloy steel, het trete, hr chrome plte. 64 heck for vilbility 1 Thres UNF-3A rm evy uty ro en no DIMENSIONS IN INES ll i thre unjf-3 ril Sttic lo rm-3 r , rm-4 r / , rm-5 r / , rm-6 r / , rm-7 r / , rm-8 r / , rm-10 r / , rm r / , rm-12 r / , rxm extr evy uty ro en no DIMENSIONS IN INES ll i thre unjf-3 PTFE Liners use suffix T Ex: RAM-10T ril Sttic lo rxm-3 rx / , rxm-4 rx / , rxm-5 rx / , rxm-6 rx / , rxm-7 rx / , rxm-8 rx / , rxm-10 rx / , rg. t. rg. t.

65 ig mislignment SerieS mle ro ens & SPeril erings Xm-t oy steel, het trete, protective cote for corrosion resistnce. rce steel, het trete, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. Ptfe liner - (AT 3200) Permnently bone to rce insie imeter. Qulifie to SAE- AS81820 (formerly MIL ) -t, -tg Xm-t ro en no DIMENSIONS IN INES ll i. ±.031 thre unjf-3 o Shouler i. ril Sttic lo Xm-4t X-4t / , Xm-5t X-5t / , Xm-6t X-6t / , Xm-7t X-7t / , Xm-8t X-8t / , Xm-10t X-10t / , Xm-12t X-12t / , t rg. t. ering no. Groove Plin DIMENSIONS IN INES m o P S min. G r ll i. ril Sttic limit lo -4tG -4t , tG -5t , tG -6t , tG -7t , tG -8t , tG -10t , tG -12t , tG -14t , rg. t. 65

66 Performne ring SerieS PRM-T & PRXM-T Series Mle Ro Ens - PTFE Line Prm-t oy steel, het trete, protective cote for corrosion resistnce. rce - Stinless steel (17-4 P per AMS 5643), het trete PrXm-t ll - Alloy steel, het trete, hr chrome plte. Mnufcturers option: 440 stinless steel, het trete. Ptfe liner - (AT 3200) Permnently bone to rce insie imeter. Qulifie to SAE-AS81820 (formerly MIL ) Prm-t - Performne ring SerieS 66 ro en no DIMENSIONS IN INES ll i. ±.031 thre unjf-3 ril Sttic lo no lo rottionl rekwy torque in- Prm-5t Pr-5t / , Prm-6t Pr-6t / , Prm-7t Pr-7t / , Prm-8t Pr-8t / , Prm-10t Pr-10t / , Prm-12t Pr-12t / , PrXm-t - Performne ring - evy uty SnK SerieS ro en no DIMENSIONS IN INES ll i. ±.031 thre unjf-3 ril Sttic lo no lo rottionl rekwy torque in- PrXm-4t PrX-4t / , PrXm-5t PrX-5t / , PrXm-6t PrX-6t / , PrXm-7t PrX-7t / , PrXm-8t PrX-8t / , PrXm-10t PrX-10t / , rg. t. rg. t.

67 Performne ring SerieS PN-TG & PN-T Series, P-TG & P-T Series Sphericl erings - PTFE Line ll - Alloy steel, het trete, hr chrome plte. Mnufcturers option: 440 stinless steel, het trete. rce P stinless steel (AMS 5643), het trete Ptfe liner - (AT 3200) Permnently bone to rce insie imeter. Qulifie to SAE-AS81820 (formerly MIL ) ering no. Groove Groove Plin ering no. Plin GrooVe SerieS Pn-tG & Pn-t - Performne ring SPeril nrro SerieS DIMENSIONS IN INES o min. o min. P P-tG & P-t - Performne ring SPeril ie SerieS DIMENSIONS IN INES P S min. S min. G r ll i. Sttic limit lo ril xil no lo rottionl rekwy torque in.- P-3tG P-3t ,500 1, P-4tG P-4t ,500 1, P-5tG P-5t ,400 1, P-6tG P-6t ,700 2, P-7tG P-7t ,700 3, P-8tG P-8t ,400 4, P-9tG P-9t ,600 5, P-10tG P-10t ,000 6, P-12tG P-12t ,000 7, G r ll i. Sttic limit lo ril Plin SerieS xil no lo rottionl rekwy torque in.- Pn-3tG Pn-3t , Pn-4tG Pn-4t , Pn-5tG Pn-5t , Pn-6tG Pn-6t ,540 1, Pn-7tG Pn-7t ,200 1, Pn-8tG Pn-8t ,900 2, Pn-9tG Pn-9t ,200 3, Pn-10tG Pn-10t ,500 4, Pn-12tG Pn-12t ,400 6, rg. t. rg. t. 67

68 lm & l SerieS Xlm & Xl mle ro ens (PTFE Liners Avilble) lm Xlm oy - Aluminum T651, hr noize. rce - rbon steel, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. Thres re 1/2-20 UNJF-3A. PTFE Liners use suffix T Ex: XALM-8T lm - luminum SerieS ro en no DIMENSIONS IN INES ±.015 ll i thre unf-3 ril Sttic lo lm-8 l / , lm-10 l / , lm-12 l / , Xlm - luminum SerieS rg. t. 68 ro en no DIMENSIONS IN INES ±.015 ll i thre unf-3 ril Sttic lo Xlm-8 Xl / , Xlm-10 Xl / , rg. t.

69 militry SPeifition erings Generl Informtion Auror ering ompny's reputtion for esigning n proucing high qulity commercil ro ens n sphericl berings hs grown extensively since the inception of the orgniztion. Auror ering hs rpily expne its vrious prouct lines n now serves virtully every mjor inustril mrket. In ll of these mrkets, Auror ering hs consistently emonstrte its reputtion for furnishing relible prouct. As result, more n more firms sought help from our engineers n mnufcturing specilists to solve ifficult pplictions problems in high performnce equipment. For exmple, Auror ering ws pioneer in eveloping specil line of ro ens for the high temperture turbine engine inustry. ecuse of the specil skills evelope by our engineering n mnufcturing personnel in the commercil bering mrkets, our recognize expertise ttrcte the ttention of the militry specifiction bering mrket, which inclues the ircrft/erospce inustry. Frequently, our engineers hve been clle upon to evelop custom-esigne units for sophisticte erospce pplictions. In some instnces, our stnr commercil series of commercil ro ens n sphericl berings were more thn equte for ircrft/erospce usge. onsequently, Auror ering ompny ecie to ggressively enter the militry specifiction bering mrketplce. e now offer six stnr lines tht re presente in the following pges. Plese note tht the berings liste utilize AT 3200, Auror's exclusive PTFE bering liner fully qulifie to SAE-AS81820 (formerly MIL ). The berings re mnufcture to conform to the imensions, mterils n configurtions of the pproprite iniviul militry bering specifiction. They re fully qulifie n pprove for procurement uner these specifictions. In ition, Auror lso hs two stnr lines of berings in the generl vition fiel. onsult Auror ering engineering for itionl informtion. Sles engineers specilizing in the vition fiel re vilble to iscuss your prticulr ppliction nees. 69

70 Sm-t & S-t mle ro ens igh Strength Aerospce Series SAE-AS81935/1 (Right ) & SAE-AS81935/1 (Left ) tle i oy Alloy steel (AMS-S-5000), het trete, cmium plte. ll stinless steel (AMS 5630), het trete. rce P stinless steel (AMS 5643), het trete. liner - AT 3200 bering liner, permnently bone to rce I.D., qulifie to SAE- AS ro en no DIMENSIONS IN INES o min. S mx. ousing i.. ll i. G K P ±.031 thre unjf-3 Sm-3t S-3t / Sm-4t S-4t / Sm-5t S-5t / Sm-6t S-6t / Sm-7t S-7t / Sm-8t S-8t / Sm-10t S-10t / Sm-12t S-12t / Sm-14t S-14t / Sm-16t S-16t / rg. t. 70 Temperture Rnge: -65 F to F No lo rottionl brekwy torque cn be vrie to meet specific ppliction requirements. A Letter K to prefix to esignte keywy, Ex. : ASMK-6T. As pplicble, keywy will conform to SAE-AS81935/3 or NAS 559. All thres re rolle fter het tretment, n conform to UNJF-3A per AS AT 3200 ering Liner System is qulifie for procurement uner SAE-AS Ro En erings liste re mnufcture to conform to the imensions, mterils n configurtions of SAE-AS81935/1, n re pprove for procurement uner this specifiction. onsult fctory for itionl informtion. tle ii ro en no. ril Sttic lo ftigue lo xil Proof lo no lo rottionl rekwy torque in- min. mx. Sm-3t S-3t 2,360 1,470 1, Sm-4t S-4t 4,860 2,380 1, Sm-5t S-5t 7,180 2,770 1, Sm-6t S-6t 8,550 3,570 1, Sm-7t S-7t 12,000 4,800 1, Sm-8t S-8t 19,500 7,680 2, Sm-10t S-10t 21,900 9,180 2, Sm-12t S-12t 29,300 11,600 2, Sm-14t S-14t 34,500 13,100 3, Sm-16t S-16t 80,300 30,400 4,

71 S-t & SG-t femle ro ens igh Strength Aerospce Series SAE-AS81935/2 (Right ) & SAE-AS81935/2 (Left ) oy Alloy steel (AMS-S-5000), het trete, cmium plte. ll stinless steel (AMS 5630), het trete. rce P stinless steel (AMS 5643), het trete. liner - AT 3200 bering liner, permnently bone to rce I.D., qulifie to SAE-AS tle i.12 Rius Min. ro en no o min. DIMENSIONS IN INES S mx. ousing i.. e K i. J f ll i. P mx. min. thre unjf-3 rg. t. S-3t SG-3t / S-4t SG-4t / S-5t SG-5t / S-6t SG-6t / S-7t SG-7t / S-8t SG-8t / S-10t SG-10t / S-12t SG-12t / S-14t SG-14t / S-16t SG-16t / tle ii ro en no. ril Sttic lo ftigue lo xil Proof lo no lo rottionl rekwy torque in- min. mx. S-3t SG-3t 2,360 1,470 1, S-4t SG-4t 4,860 2,380 1, S-5t SG-5t 7,180 3,020 1, S-6t SG-6t 8,550 3,570 1, S-7t SG-7t 12,000 4,800 1, S-8t SG-8t 19,500 8,260 2, S-10t SG-10t 21,900 9,180 2, S-12t SG-12t 29,300 11,600 2, S-14t SG-14t 34,500 13,100 3, S-16t SG-16t 80,300 30,400 4, Temperture Rnge: -65 F to F No lo rottionl brekwy torque cn be vrie to meet specific ppliction requirements. A Letter K to prefix to esignte keywy, Ex. : ASK-6T. As pplicble, keywy will conform to SAE-AS81935/3 or NAS 559. All thres conform to UNJF-3 per AS AT 3200 ering Liner System is qulifie for procurement uner SAE-AS Ro En erings liste re mnufcture to conform to the imensions, mterils n configurtions of SAE-AS81935/2, n re pprove for procurement uner this specifiction. onsult fctory for itionl informtion. 71

72 n-t & n-tg SPeril erings Nrrow Aerospce Series SAE-AS14101 n SAE-AS14104 GrooVe SerieS Plin SerieS ll stinless steel (AMS 5630), het trete. rce P stinless steel (AMS 5643), het trete. liner - AT 3200 bering liner, permnently bone to rce I.D., qulifie to SAE- AS Temperture Rnge: -65 F to F No lo rottionl brekwy torque cn be vrie to meet specific ppliction requirements. AT 3200 ering Liner System is qulifie for procurement uner SAE-AS erings liste re mnufcture to conform to the imensions, mterils n configurtions of Militry Specifictions SAE-AS14101 (groove) n SAE-AS14104 (plin), n re pprove for procurement uner this specifiction. onsult fctory for itionl informtion. 72 ering no. Groove Plin DIMENSIONS IN INES o min. P S min. G r ll i. Sttic limit lo ril xil oscillt -ing lo no lo rottionl rekwy torque in- n-3tg n-3t , , n-4tg n-4t , , n-5tg n-5t , , n-6tg n-6t ,540 1,100 6, n-7tg n-7t ,200 1,400 8, n-8tg n-8t ,900 2,100 10, n-9tg n-9t ,200 3,680 13, n-10tg n-10t ,500 4,720 16, n-12tg n-12t ,400 6,750 23, n-14tg n-14t ,200 9,350 30, n-16tg n-16t ,200 12,160 38, rg. t. lb

73 -t & -tg SPeril erings ie Aerospce Series SAE-AS14102 n SAE-AS14103 GrooVe SerieS Plin SerieS ll stinless steel (AMS 5630), het trete. rce P stinless steel (AMS 5643), het trete. liner - AT 3200 bering liner, permnently bone to rce I.D., qulifie to SAE- AS Temperture Rnge: -65 F to F No lo rottionl brekwy torque cn be vrie to meet specific ppliction requirements. AT 3200 ering Liner System is qulifie for procurement uner SAE-AS erings liste re mnufcture to conform to the imensions, mterils n configurtions of Militry Specifictions SAE-AS14103 (groove) n SAE- AS14102 (plin), n re pprove for procurement uner this specifiction. onsult fctory for itionl informtion. ering no. Groove Plin DIMENSIONS IN INES o min. P S min. G r ll i. Sttic limit lo ril xil oscillt -ing lo no lo rottionl rekwy torque in- -3tG -3t ,500 1,770 4, tG -4t ,500 1,770 4, tG -5t ,400 1,640 6, tG -6t ,700 2,630 8, tG -7t ,700 3,650 11, tG -8t ,400 4,970 14, tG -9t ,600 5,370 18, tG -10t ,000 6,130 20, tG -12t ,000 7,730 26, tG -14t ,200 10,800 33, tG -16t ,000 19,300 56, rg. t. lb 73

74 Gmm-m & Gm-m SerieS mle ro ens Generl Avition Precision etil etil oy - rbon steel, protective cote for corrosion resistnce. rce - rbon steel, protective cote for corrosion resistnce. Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese contct our engineering eprtment. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: GMM-3MZ-470 F Flush type fitting Ex: GMM-3MF-470 ll - Alloy steel, het trete, hr chrome plte. notes - Units re mgnetic prticle inspecte fter ssembly. 74 ering no. ll Shouler onfigurtion DIMENSIONS IN INES ±.005 ±.015 ±.010 o Shouler i. ll i. min. f rille ole i ref thre unf-3 ril Sttic lo Gmm-3m-470 Gm-3m-470 See etil / , Gmm-3m-570 Gm-3m-570 See etil / , Gmm-3m-670 Gm-3m-670 See etil / , Gmm-3m-680 Gm-3m-680 See etil / , Gmm-4m-470 Gm-4m-470 See etil / , Gmm-4m-675 Gm-4m-675 See etil / , Gmm-4m-680 Gm-4m-680 See etil / , rg. t.

75 Gm-m & GmG-m SerieS femle ro ens Generl Avition Precision etil etil oy - rbon steel, protective cote for corrosion resistnce. rce - rbon steel, protective cote for corrosion resistnce. ll - Alloy steel, het trete, hr chrome plte. notes - Units re mgnetic prticle inspecte fter ssembly. Left hn units ientifiction groove ner en of shnk. Units re supplie without grese fittings. hen grese fitting is require, specify by ing suffix s esignte. Z Zerk type fitting Ex: GM-3MZ-470 F Flush type fitting Ex: GM-3MF-470 Lo rtings pply only to ro ens without grese fittings. For lo rtings with fittings, plese consult our engineering eprtment. ering no. ll Shouler onfigurtion ±.005 DIMENSIONS IN INES ±.015 ±.010 K ±.010 J ±.010 n ±.005 o Shouler i. ll i thre unf- 3 ril Sttic lo Gm-3m-470 GmG-3m-470 See etil / , Gm-3m-471 GmG-3m-471 See etil / , Gm-3m-480 GmG-3m-480 See etil / , Gm-3m-570 GmG-3m-570 See etil / , Gm-4m-470 GmG-4m-470 See etil / , Gm-4m-595 GmG-4m-595 See etil / , rg. t. 75

76 instlltion of SPeril ering SPERIAL EARING INSTALLATION Proper instlltion of the bering is importnt to prevent bering filure s well s housing mge. Uner no circumstnces shoul tool tht inuces shock or impct to the bering be use. The use of n rbor press or hyrulic press is recommene. A tool s shown bove (Figure 1) is vise. All force is to be pplie on the bering rce fce (not on bll). A le chmfer or rius on the bering n/or housing is vitl. AMFER FOR GROOVE TYPES ousing mfer - GrooVe erings GROOVE TYPE A.020 GROOVE TYPE.030 GROOVE TYPE.050 StKinG GrooVe types 76

77 instlltion of SPeril ering it StKinG GrooVeS tools n StKinG metos SPERIAL EARING INSTALLATION The berings hve grooves in ech sie of the bering rce fce, leving smll lip. Stking tools (s shown bove in Figure 2) re then use to stke the lip over the chmfer eges of the housing. A typicl rrngement consists of two ienticl nvils n one guie pin which is secure by set screw in the bottom nvil. PROEDURES 1. Instll bering into housing s shown in Figure 1 (pg. 64) n position bering symmetricl bout housing centerline. 2. Align bering with stking tool n guie pin s shown in Figure A tril stke ssembly shoul be me to etermine stking force necessry to meet thrust lo requirements. Proper stking force is require becuse excessive pressure coul result in bering istortion long with life. 4. Pressure estblishe by tril ssembly is to be pplie. After first stke is complete rotte ssembly 90 n re-pply. Repet opertion through minimum of three rottions to insure 360 uniformity of stke. 5. After stking, slight gp my exist between rce lip n housing chmfer. This slight gp (shown below) my not be cuse for rejection if bering meets or excees thrust los. 77

78 REFERENE Specil Size Rce r Prts Prts commonly use in the rce cr inustry, long with common prt number references. hile not ctloge, mny of these prts re stocke. heck with eler or fctory for vilbility. uror Prt # ommon Prt # thre escription / note AM-4T-9 R /16-24 AM-6T P /2-20 AM-6T /8-18 AM-6T P /2-20 AM /4-16 Soli ro eye AM-14T AM-14T /8-14 et trete rce M /4-16 OM-8T-7 21NZ et trete rce OM-8T P OM-8T Mil steel rce OM-8T Drg Shocks OM-10T P A-5TG-3 AYT-5V XAM-8T /2-20 igh Mislignment LOM-10T LS10, RS PRXM-7T /2-20 P-8T-3 RR08D/E RXAM-8T /4-16 RAM-16T ,643 lb. RSL RAM-16T / ,643 lb. RSL XAM-6T P /2-20 XAM-8T /4-16 XAM-8T-5 MNR08U /2-20 XM / piece. Line:VXM-8 D note: Dimensions re for reference only, n my not fully reflect ctul prt specifictions. heck ctlog or fctory for relte series mteril specifictions, tolernces, etc. 78

79 referene Inch / Metric onversion Tble Most commonly use conversions in ol. IN MM IN MM IN MM IN MM frt. e. frt. e. frt. e. frt. e / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / IN/METRI ONVERSION FATORS Inches x 25.4 = Millimeters Pouns x.4536 = Kilogrms Pouns(Force)x = Newtons Millimeters x = Inches Kilogrms x = Pouns Newtons x.2248 = Pouns(Force) Sq. Inches x = Sq. entimeters Lbs. per In. 2 x.0703 = kg per cm 2 Temperture onversion (Approximte) Sq. entimeters x.155 = Sq. Inches kg per cm 2 x = Lbs. per In. 2 Degrees = (Degrees F -32)(.5556) Degrees F = (Degrees )(1.8)

80 REFERENE Engineering Informtion tp rill SizeS for in tres Screw thre ommercil tp rills thre size root i. Size or number eciml equiv /4-28 5/ /8-24 7/ /2-13 1/2-20 5/8-11 5/8-18 3/4-16 7/ / / / I Q 25/64 27/64 29/64 17/32 37/64 11/16 13/16 59/64 15/ / / / / us ritin frne Germny itly JPn isi.s. fnor in uni JiS M 15 X 15 k S A tp rill Size metri tres tre Size/tP M3 X 0.5 M5 X 0.8 M6 X 1.0 M8 X 1.25 M10 X 1.5 M12 X 1.75 M14 X 2.0 M16 X 2.0 M18 X 1.5 M20 X 1.5 M22 X 1.5 M24 X 2.0 M30 X 2.0 metri rill Size The tbles bove re to be use s guies only. onsult the pproprite reference to etermine best size bse on fit requirements, mterils use, etc. STEEL DESIGNATION ROSS REFERENE TALE M M 5 20 Mn 5 G 22 Mn 3 SMn M 44 SUM M 07 S SMn 36 F 9 Mn 36 SUM DS D 4 25 rmo 4 25 rmo 4 SM M D 4 TS 41 rmo 4 41 rmo SM M ND 6 24 rnimo 6 35 NirMo 6 SNM A r r 6 SUJ S 21 Z 10 NF X 10 rnis 18 9 X 10 rnis 1809 SUS S 21 Z 3 14 X7 r 14 X 12r 13 SUS Z 100 D 17 X 105 rmo 17 SUS Z 5 NU 17.4 X 5 rniunb SUS 80 This tble is to be use s guie to ssist in fining comprble metl esigntions only. True interchnge cn be etermine only by compring chemicl composition, mechnicl properties, n mnufcturing technologies. 80

81 REFERENE Terms Trnsltions english french Germn itlin Portugese Spnish Aerospce Aérosptil Luftfhrt Aerospzile Aeroespcil Aeroespcil Aluminum Aluminium Aluminium Alluminio Aluminio Aluminio Axil Axile Axil Assili Axil Axil ll gue interieure Innenringe Anello Interno nel intero Esfer oy orps Geheuse Test orpo cuerpo A se to enter bse pour centrer longueur Abstn, Unterseite zur Mitte lunghezz, bse l centro istânci, bse o centro ltur, bse centro ore Alesges ohrung foro Furo gujero ommercil Kommerziell uso generico omercil omercil hrome plte chromge verchromt cromtur Plc o cromo cromo D Dimeter Dimetre Durchmesser Dimetro Dimetro Dimetro Femle thre Filetges Femelle Innengewine Filetttur inter Rosc Feme rosc hembr Grese Fitting Grisseur Schmiernippel Ingrsstore lubrificor lubricor e or Rce ith lrgeur e logement Geheusebreite / Lgersschlenbreite spessore test / spessore boccol lrgur extern o nel nchur e l pist Inustril gre Inustriel Inustrie-Qulitet qulità inustrile Inustril Keywy Rinure e lvette Keilnute Scnltur cunero Left guche Links sinistr invers Rosc izquier Lo cpcity cpcite e chrges belstbr cpcità i crico pcie crg pci e rg Mle thre Filetges mle Aussengewine mschio filettto Rosc mcho Rosc mcho Militry Specifiction Spécifictions Militires Militär-Vorschrift Specific Militre Especificção Militr Especificcion Militr á Mislignment ngulires Kippwinkel ribltmento inclinco eslinemiento Rce Logement Lgerschle boccol / nello esterno nel externo Pist Ril Rile Ril Rili Ril Ril Right Normes, Droite Rechts estr norml Rosc Derech Ril Sttic Lo chrge sttique sttische Trgzhl rico Sttico pcies e crg esttic rg ril mxim Ro en Embouts Gelenkkopf, pl. Gelenkkoepfe Teste Snoo Terminis Rotulres bezs e rticulción Sphericl bering Rotules Gelenklger Snoi Sferici Rotuls Rotul Esferic Stinless steel Acier Inoxyble Rostfrei Acciio inox Aco inox Acero inoxible Steel Acier Sthl Acciio Aco Acero Thre Filetge Gewine Filetttur Rosc Rosc Thre Length longueur u filetge Gewinelenge lunghezz el filetto comprimento rosc Longitu e Rosc ith of bll lrgeur bille Innenringbreite spessore nello interno lrgur intern o nel nchur e l esfer A guie to trnslte common ro en inustry terms from English to note lnguge. This is guie only. onsulttion with pproprite lnguge references is recommene for best ccurcy. 81

82 AURORA EARING OMPANY... exlusive: SPeilly esigne ro ens n linkges i illustrte re vriety of specil linkges n ro ens. let us esign specils to meet your specific pplictions. 82

83 ... TE MOTION -TRANSFER SPEIALISTS EXLUSIVE: 2 AN 3 A RAINGS OF AURORA EARING RO EN AN SPERIAL EARINGS Auror ering hs evelope AD rwing librry of its entire ctlog offering of Ro En n Sphericl erings, incluing Mil Spec pprove prts. These 2D n 3D imges re importble into most mjor AD n soli moeling pckges, n inclues both line rwings n 3D moels. The entire progrm n librry cn be viewe on our exclusive Auror ering D, vilble free upon request. This D lso inclues the Auror ering ommercil n Avition proucts ctlogs. in ition, files re ccessible t try us online where we re more thn website, we re resource! The Auror ering website is more thn just n Internet loction for the Auror ering prouct ctlog. It llows immeite ccess to: - exclusive Auror ering AD rwing librry - technicl resources such s inustry terms n efinitions - nswers to frequently ske technicl questions - reprints of rticles regring ro ens n sphericl berings - in-epth technicl t - interchnge guies for prts use in specilize inustries AEROSPAE MILITARY MOTORSPORTS MARINE TRANSPORTATION ATTRATIONS PAkAGING 83

84 uror ering ompny 901 ucutt ro montgomery, il u.s.. Pone: (630) fx: (630) This ctlog is being provie s convenience n is for informtionl purposes only. The Auror ering ompny bers no responsibility for the ccurcy of the ctlog or for tht of informtion presente therein. ontct the Auror ering ompny for nswers to questions regring its content.