ITT Cannon Combination D-Sub Connectors
|
|
|
- Joel Lindsey
- 5 years ago
- Views:
Transcription
1 PPLICTIONS Video Coaxial Transmission (75Ω) RF and Telecom Transmission (50Ω) Power Interconnects (Up to 40) ITT Cannon Combination D-Sub Connectors RECTNGULR CONNECTOR SUITED FOR NETWORK ND COMMUNICTION PORTS ITT Cannon Combination D-Sub connectors offer the advantages of an industry standard shield I/O interconnect, with the flexibility of a customized special, designed for any application. This connector system is ideal for applications that require optimization of space while improving overall shielding. Combination D-Sub accomplishes this by combining multiple interconnect types into one fully-shielded product, decreasing the number I/O interfaces and reducing the possibility of EMI/RFI leakage. erospace Defense Industrial Transportation ITT CNNON COMINTION D-SU CONNECTORS FETURES OPTIMIZTION OF SPCE WHILE IMPROVING OVERLL SHEILDING Combination D-Sub connectors are ideal for applications that require optimization of space while improving overall shielding. Combination D-Sub accomplishes this by combining multiple interconnect types into one fully shielded product, decreasing the number of I/O interfaces and reducing the possibility of EMI/RFI leakage. These connectors are typically used where small space and overall shielding are of primary concern. VERSTILE CONTCT COMINTIONS These connectors can combine high power, high voltage, coaxial 50 & 75 ohm with pre-installed signal contacts. In addition, they are available in either solder or crimp terminations. Guide pins and sockets make for blind mating applications. Combination D-Sub connectors are available up to 8 size 8 cavities for the High Power, High Voltage, coaxial contacts and up to 46 signal contacts. FLEXIILITY Combination D-Sub connector series offers the advantages of an industry standard shield I/O interconnect with standard and European footprints, and the flexibility of a customized special, designed for any application. There is a wide range of contact and shell types available including RoHS compliant versions, dimpled shells, and stainless steel shells for durability. Please view the specifications for the various shell and contact platings available. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 167
2 ITT CNNON COMINTION D-SU CONNECTORS CNNON D-SU PREFIX D* D* D*U D*SF D*M D*M D*M D-SU FMILY ORIGINL D COMMERCIL D URGUN- D FLT CLE IDC D COMO D MRK I MRK II TERMINTION SOLDER CUP X X X - CRIMP ND INSERT - X X - X - X STRIGHT PC X - X - X X - RIGHT NGLE PC X - X - X X - WIRE WRP X X X - IDC X PRESS FIT PRE-WIRED CONTCT STYLE MCHINED X - X - X X X STMPED & FORMED FETURES X X X X ++H - X COMO - X - - X - X HIGH DENSITY X DOULE DENSITY MICRO (SUPER HIGH DENSITY) TECHNICL SPECIFICTION SHELL STEEL STEEL STEEL STEEL STEEL STEEL STEEL PLTING TIN TIN TIN TIN TIN TIN/CD TIN/CD INSULTOR PLSTIC, PLSTIC, PLSTIC, PLSTIC, PLSTIC, PLSTIC, PLSTIC, CONTCT LLOY LLOY LLOY LLOY LLOY LLOY LLOY PLTING CURRENT IN MPS TEMPERTURE -55 C TO 125 C -55 C TO 105 C -55 C TO 105 C -55 C TO 105 C -55 C TO 125 C -55 C TO 125 C -55 C TO 125 C TEST VOLTGE T SE LEVEL 1250 VC 500 VC 1000 VC 750 VC 1250 VC SIGNL 1000 VC COX/ HIGH POWER 2800 VC HIGH VOLTGE 1000 VC 1200 VC CONTCT RESISTNCE VILLE PC FOOT PRINTS MM MM MM - QULIFICTIONS M24308 M24308 For signal contacts ++Up to 40 amp on power 5 amp in coax and high voltage ll dimensions in inches, unless otherwise stated. 168 For assistance in North merica: sales@peigenesis.com
3 CNNON D-SU PREFIX D-SU FMILY D*NG PRESS FIT D D*W DISCRETE WIRE IDC D*M* NM* ZD* ZED* D*JK D*JT SPCE D LOW COST COMMERCIL D FILTER D TERMINTION SOLDER CUP - - X - - X - CRIMP ND INSERT - - X X - - X STRIGHT PC - - X X - X X RIGHT NGLE PC - - X X X X X WIRE WRP - - X IDC - X PRESS FIT X PRE-WIRED CONTCT STYLE MCHINED - - X - - X - STMPED & FORMED FETURES X - - X X - X COMO - - X D* DOULE DENSITY ITT CNNON COMINTION D-SU CONNECTORS HIGH DENSITY - - X X X - - DOULE DENSITY X - MICRO (SUPER HIGH DENSITY) X SHELL STEEL STEEL TECHNICL SPECIFICTION LUMINUM RSS STEEL STEEL STEEL STEEL STEEL PLTING TIN TIN ZINC/CD/GOLD TIN TIN TIN TIN/CD/ZINC INSULTOR CONTCT PLTING PLSTIC LLOY PLSTIC LLOY PLSTIC LLOY PLSTIC LLOY PLSTIC LLOY PLSTIC LLOY CURRENT IN MPS PLSTIC LLOY TEMPERTURE -55 C TO 125 C -55 C TO 125 C -55 C TO 125 C -55 C TO 105 C -55 C TO 105 C -55 C TO 125 C -55 C TO 85 C TEST VOLTGE T SE LEVEL CONTCT RESISTNCE VILLE PC FOOT PRINTS 1200 VC 1000 VC VC SIGNL 1000 VC COX/ HIGH POWER 2800 VC HIGH VOLTGE QULIFICTIONS - - ll dimensions in inches, unless otherwise stated. M P VC 1000 VC MM MM 250Vdc (100VDC WORKING) VC For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 169
4 ITT CNNON COMINTION D-SU CONNECTORS EXPLNTION SERIES D*M - Commercial Version D*MM - High Rel Version (50 micro in. Gold Plating) * - Shell Sizes: E,,, C, & D HRDWRE MODIFIER Omit in. (3.05mm) Through Hole C D E G H J L N O P Q S T U V W X Y Z - 90 Metal racket, #4-40 Fastener, & oardlock - 90 Metal racket, Fastener, & #4-40 Screwlock - #4-40 Cinch Nut - 90 Metal racket, Fastener, #4-40 Screwlock & oardlock in. (7.6mm) Standoff & #4-40 Screwlock - 90 Metal racket, Fastener, M-3 Screwlock, & oardlock - 90 Metal racket, M3 Fastener, & oardlock in. (7.6mm) Standoff with #4-40 Screwlock & oardlock - 90 Metal racket, Fastener, & M-3 Screwlock - 90 Metal racket, #4-40 Fastener in. (7.6mm) M3 Standoff with oardlock - 90 Metal racket & M3 Fastener in. (7.6mm) M3 Standoff in. (7.6mm) Standoff, M-3 Screwlock & oardlock in. (7.6mm) #4-40 Standoff in. (7.6mm) Standoff & M-3 Screwlock - M3 Clinch Nut - Dual Float Mount in. (7.6mm) #4-40 Standoff with oardlock HOW TO ORDER DM C 13C3 S J 197 Series Hardware Modifer Contact rrangement and *Contact Code (Total # of contacts, *# of size 8 cavities) CONTCT CODE (TOTL # OF CONTCTS *# OF SIZE 8 CVITIES) W - Empty Size 8 Cavities C - 75 Ohm Coax Installed (Straight or 90 ) X - 50 Ohm Coax Installed (Straight or 90 ) H - High Power Installed ( Standard ) P - High Power Installed ( Euro, 90 Only) V - High Voltage Installed (vailable in Straight PC Only) R - Mini High Power Installed (90 Only) G - Guide Pin or Guide Socket Installed M - 50 ohm coax contact installed, machined 50 micro in. gold N - 50 ohm coax contact installed, machined 30 micro in. gold CONTCT TYPE P - Male (Plug, Pin) S - Female (Receptacle, Socket) PRINTED CIRCUIT TERMNIL MODIFIER Omit - Solder Cup (Size 8 Contacts not Loaded on these Versions) J N V Y - 90 PC, Standard Footprint signal contacts - Straight, Standard PC tail diameter signal contacts - 90 PC, European Footprint signal contacts ( 10N ) - Straight, European PC tail diameter signal contacts ( OL4 ) MODIFICTION CODE Omit - Gold Plated Contacts, Yellow Chromate over Zinc on Shells Yellow Chromate coating over Cadmium Yellow Chromate coating over Zinc micro in. gold over 40 micro in. nickel, 500 mating cycles micro in. gold over 40 micro in. nickel, 200 mating cycles Gold Plated Contacts, Tin on Shells (Socket only) micro in. gold over 50 micro in. nickel micro in. gold over 85 micro in. nickel, recommend using 208 F225 - Stainless Steel Shells K87 Contact Type - Gold Plated Contacts, Tin with Dimples on Shells (Pin only) K micro in. Gold plated contacts, Tin on Shells (Socket Only) K micro in. Gold plated contacts, Tin with dimples on Shells (Pin Only) Printed Circuit Termnial Modifier Modification Code 170 For assistance in North merica: sales@peigenesis.com
5 HOW TO ORDER CONTCT RRNGEMENT (TOTL # OF CONTCTS *# OF SIZE 8 CVITIES) CONTCT RRNGEMENT SHELL SIZE CONTCT SIZE *K2 E 0 2 5*1 E 4 1 3* * * * * * ITT CNNON COMINTION D-SU CONNECTORS 17* * *8 C *6 C *5 C *4 C *3 C *2 C *7 D *4 D *2 D *1 D 46 1 *Insert contact code for size 8 cavities For Combo-D size 8 contacts, a see page For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 171
6 ITT CNNON COMINTION D-SU CONNECTORS CONTCTS & TOOLS CLE (SIZE 8) LOOSE CONTCTS COXIL 75 OHM RG CLE KIT GOLD KIT 30 IN. GOLD KIT 50 IN. GOLD NUMER OVER NI OVER NI OVER NI CENTER CRIMP TOOL OUTER CRIMP TOOL RG 179/U D D D CHT-750HM CCTP-DM RG 179/U D D D CHT-750HM CCTP-DM CLE (SIZE 8) LOOSE CONTCTS COXIL 50 OHM STRIGHT STRIGHT CRIMP RID RG CLE NUMER 50µ IN. D OLD NEW MIN. Plug 196/U 178/U DM53740 DM ,80 (.739) 24,00 (.945) 1,00 (.040) Plug 187/U 179/U 188/U 316/U DM DM ,80 (.739) 24,00 (.945) 1,70 (.067) Plug - RD316 DM ,80 (.739) 24,00 (.945) 1,70 (.067) Plug 195/U 180/U DM DM ,50 (.847) 26,34 (1.037) 2,79 (.110) Plug 58/U 58/U DM DM ,50 (.847) 26,34 (1.037) 3,18 (.125) Receptacle 196/U 178/U DM53742 DM ,80 (.739) 24,00 (.945) 1,00 (.040) Receptacle 187/U 179/U 188/U 316/U DM DM ,80 (.739) 24,00 (.945) 1,70 (.067) Receptacle - RD316 DM ,80 (.739) 24,00 (.945) 1,70 (.067) Receptacle 195/U 180/U DM DM ,50 (.847) 26,34 (1.037) 2,79 (.110) Receptacle 58/U 58/U DM DM ,50 (.847) 26,34 (1.037) 3,18 (.125) STRIGHT SOLDER RID RG CLE NUMER 50µ IN. OLD NEW Plug 196/U 178/U DM DM ,80 (.739) 24,00 (.945) 1,00 (.040) Plug 187/U 179/U 188/U 316/U DM DM ,80 (.739) 24,00 (.945) 1,70 (.067) Plug - RD316 DM ,80 (.739) 24,00 (.945) 1,70 (.067) Plug 195/U 180/U DM DM ,50 (.847) 26,34 (1.037) 2,79 (.110) Plug 58/U 58/U DM DM ,50 (.847) 26,34 (1.037) 3,18 (.125) Plug (Short Type) 196/U 178/U DM DM ,00 (.670) 22,20 (.874) 1,14 (.045) Receptacle 196/U 178/U DM DM ,80 (.739) 24,00 (.945) 1,00 (.040) Receptacle 187/U 179/U 188/U- 316/U DM DM ,80 (.739) 24,00 (.945) 1,70 (.067) Receptacle - RD316 DM ,80 (.739) 24,00 (.945) 1,70 (.067) Receptacle 195/U 180/U DM DM ,50 (.847) 26,34 (1.037) 2,79 (.110) Receptacle 58/U 58/U DM DM ,50 (.847) 26,34 (1.037) 3,18 (.125) Receptacle (Short Type) 196/U 178/U DM DM ,00 (.670) 22,20 (.874) 1,14 (.045) For crimp tooling and extraction tool, a see page 173. ll dimensions in millimeters (inches in parentheses) D MIN. 172 For assistance in North merica: sales@peigenesis.com
7 RG CLE NUMER OLD NEW CONTCTS & TOOLS CLE (SIZE 8) LOOSE CONTCTS COXIL 50 OHM 90º 90 CRIMP RID 50µ IN. C D ±0,13 (.005) 196/U 178/U DM53741 DM ,46 (.530) 18,92 (.745) 15,10 (.594) 1,14 (.045) 187/U 179/U 188/U 316/U DM DM ,46 (.530) 18,92 (.745) 15,10 (.594) 1,83 (.072) 195/U 180/U DM DM ,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 58/U 58/U DM DM ,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 196/U 178/U DM DM ,46 (.530) 18,92 (.745) 15,09 (.594) 1,14 (.045) 187/U 179/U 188/U 316/U DM DM ,46 (.530) 18,92 (.745) 15,09 (.594) 1,83 (.072) 195/U 180/U DM DM ,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 58/U 58/U DM DM ,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 90 SOLDER RID ITT CNNON COMINTION D-SU CONNECTORS RG CLE NUMER OLD NEW 50µ IN. 196/U 178/U DM DM ,46 (.530) 18,92 (.745) 15,10 (.594) 1,00 (.040) 187/U 179/U 188/U 316/U DM DM ,46 (.530) 18,92 (.745) 15,10 (.594) 1,70 (.067) 195/U 180/U DM DM ,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 58/U 58/U DM DM ,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 196/U 178/U DM DM ,46 (.530) 18,92 (.745) 15,09 (.594) 1,00 (.040) 187/U 179/U 188/U 316/U DM DM ,46 (.530) 18,92 (.745) 15,09 (.594) 1,70 (.067) 195/U 180/U DM DM ,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 58/U 58/U DM DM ,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) C D MIN. CRIMP TOOLING EXTRCTION TOOL CET-C RG CLE TOOL PRT NUMER NUMER DESCRIPTION CLOSURE 196/U, 178/U CCT-DM C 187/U, 179/U, 188/U, 316/U CCT-DM 195/U, 180/U, 58/U, 58/U CCT-DM For all size 8 Combo-D contacts, high power, high voltage and coaxial types. ll dimensions in millimeters (inches in parentheses) For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 173
8 ITT CNNON COMINTION D-SU CONNECTORS CLE (SIZE 8) LOOSE CONTCTS HIGH POWER SOLDER CLE (SIZE 8) LOOSE CONTCTS HIGH POWER CRIMP CONTCTS & TOOLS WIRE SIZE CURRENT RTING 50µ IN. 8 WG 40 DM DM WG 20 DM DM WG 10 DM DM WIRE SIZE CURRENT RTING 50µ IN. 8 WG 40 DM DM WG 20 DM DM WG 10 DM DM For extraction tool, a see page 173 WIRE SIZE CURRENT RTING 30 IN. NI 50µ IN. 8 WG 40 DM DM DM ,60 (.181) 5,84 (.230) 12 WG 20 DM DM DM ,54 (.100) 5,54 (.218) 16 WG 10 DM DM DM ,07 (.067) 2,59 (.102) Ø Ø WIRE SIZE CURRENT RTING 30 IN. NI 50µ IN. Ø Ø 8 WG 40 DM DM DM ,60 (.181) 5,84 (.230) 12 WG 20 DM DM DM ,54 (.100) 5,54 (.218) 16 WG 10 DM DM DM ,07 (.067) 2,59 (.102) For extraction tool, a see page 173. HIGH POWER CRIMP TOOLING ll dimensions in millimeters (inches in parentheses) WIRE SIZE CRIMP TOOL LOCTOR (TOOL SETTING NUMER) 8 WG M300-T TP968 (6) 10 WG M300-T TP968 (5) 12/14 WG M300-T TP968 (1) 16 WG FT-8 TH554 (6) 18 WG FT-8 TH554 (5) 174 For assistance in North merica: sales@peigenesis.com
9 CLE (SIZE 8) LOOSE CONTCTS HIGH VOLTGE STRIGHT CONTCTS & TOOLS WIRE SIZE 50µ IN. 20 WG DM51157 DM WIRE SIZE 50µ IN. 20 WG DM51155 DM CLE (SIZE 8) LOOSE CONTCTS HIGH VOLTGE 90º ITT CNNON COMINTION D-SU CONNECTORS WIRE SIZE 50µ IN. 20 WG DM DM WIRE SIZE 50µ IN. 20 WG DM DM For extraction tool, a see page 173. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 175
10 ITT CNNON COMINTION D-SU CONNECTORS PC (SIZE 8) LOOSE CONTCTS COXIL 75 OHM STRIGHT DM PC (SIZE 8) LOOSE CONTCTS COXIL 75 OHM 90 DM CONTCTS & TOOLS DM DM PC (SIZE 8) LOOSE CONTCTS HIGH POWER STRIGHT PIN DM SOCKET DM PC (SIZE 8) LOOSE CONTCTS HIGH POWER 90 PIN DM SOCKET DM SHELL SIZE PRT ØC NUMER ± 0,25 (.010) ±0,25 (.010) ±0,13 (.005) DE, D, D, DC DM ,62 (.418) 26,64 (1.049) 3,18 (.125) DD DM ,41 (.528) 26,64 (1.049) 3,18 (.125) EUROPEN FOOTPRINT DE, DM ,06 (.711) 11,00 (.433) 2,90 (.114) D, D, DC, DD For extraction tool, a see page 173. ll dimensions in millimeters (inches in parentheses) SHELL SIZE PRT ØC NUMER ± 0,25 (.010) ±0,25 (.010) ±0,13 (.005) DE, D, D, DC DM ,41 (.528) 26,52 (1.044) 3,18 (.125) DD DM ,62 (.418) 26,52 (1.044) 3,18 (.125) EUROPEN FOOTPRINT DE, DM ,00 (.433) 17,93 (.706) 2,90 (.114) D, D, DC, DD 176 For assistance in North merica: sales@peigenesis.com
11 PC (SIZE 8) LOOSE CONTCTS HIGH VOLTGE STRIGHT CONTCTS & TOOLS PC (SIZE 8) LOOSE CONTCTS HIGH POWER 90 PIN DM SHELL SIZE PRT NUMER ± 0,25 (.010) ±0,25 (.010) ØC ±0,13 (.005) DE, D, D, DC DM ,62 (.418) 26,64 (1.049) 3,18 (.125) DD DM ,41 (.528) 26,64 (1.049) 3,18 (.125) EUROPEN FOOTPRINT DE, D, D, DC, DD DM ,06 (.711) 11,00 (.433) 2,90 (.114) SOCKET DM SHELL SIZE PRT NUMER ± 0,25 (.010) ±0,25 (.010) ØC ±0,13 (.005) DE, D, D, DC DM ,41 (.528) 26,52 (1.044) 3,18 (.125) DD DM ,62 (.418) 26,52 (1.044) 3,18 (.125) EUROPEN FOOTPRINT DE, D, D, DC, DD DM ,00 (.433) 17,93 (.706) 2,90 (.114) ITT CNNON COMINTION D-SU CONNECTORS GOLD OVER DM µ IN. DM GOLD OVER DM µ IN. DM For extraction tool, a see page 173. ll dimensions in millimeters (inches in parentheses) For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 177
12 ITT CNNON COMINTION D-SU CONNECTORS CONTCTS & TOOLS GUIDE PIN ND SOCKET Installs into any Combo D, Size 8 cavity. This guide pin and socket system is ideal for blind mate applications where space is limited. PC GUIDE PIN PRT MTERIL FINISH NUMER DM LLOY TIN PC GUIDE SOCKET PRT NUMER MTERIL FINISH LLOY TIN For extraction tool, a see page For assistance in North merica: sales@peigenesis.com
D Subminiature Combo D
Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2
Cover headline Cover headline D-Subminiature Product Overview
Cover headline Cover headline D-Subminiature Product Overview D-Subminiature Connectors Key Markets & Applications Invented by Cannon engineers in 1952 for aircraft radio systems, the D-Subminiature was
Cover headline Cover headline D-Subminiature Product Overview
Cover headline Cover headline D-Subminiature Product Overview D-Subminiature Connectors D*M, D*MM, D*MA with NM, NMB option connectors are used when non magnetic characteristics are required. Hermetic
Cover headline Cover headline D-Subminiature Product Overview
Cover headline Cover headline D-Subminiature Product Overview D-Subminiature Connectors Key Markets & Applications ITT Cannon s D-Subminiature product line is engineered to perform in the harshest environments.
IT - ITS - ITS-RG - ITZ Connectors
CONNECTOR CONTCTS Series Presentation Contacts in this chapter can be used for the following circular connector series: IT, ITZ, ITS and ITS RG. Threaded IT series have been designed to be fully conform
Amphenol MS3450 (Matrix ) Series MIL-DTL-5015
mphenol MS3450 (Matrix ) Series MIL-DTL-5015 HIGH-PERFORMNCE LTERNTIVE TO OLDER MIL-DTL-5015 SOLDER TYPES The MIL-DTL-5015 Rear-Release Threaded MS3450 Matrix series uses rear-release crimp contacts with
RR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS M, CRIMP TYPE
INCH-POUND MIL-DTL-83513/3J 6 July 2016 SUPERSEDING MIL-DTL-83513/3J w/mendment 2 4 September 2013 DETIL SPECIFICTION SHEET CONNECTORS, ELECTRICL, RECTNGULR, PLUG, MICROMINITURE, POLRIZED SHELL, PIN CONTCTS,
SMB Connectors, 50 Ohm
SM Connectors, 50 Ohm Straight Plugs Max. 21.10 [.830] Max. Outer Other Metal s Dielectric Style 178, 178, 178, 196, 196 Gold Gold Nickel TEFLON MIL 413985-6 MIL 413985-1 Gold Gold Nickel TEFLON MIL 413985-3
Hi Density Card Connector SPECIFICATIONS: STANDARD MATERIALS AND FINISHES
Hi Density ard onnector SPEIFITIONS: The micro-miniature card connector series 106 is designed for a space conscious industry. The hi-density card configuration connector provides an extremely dense and
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/90/102427427.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
Cannon Trident Connectors
Contacts General recommendations for the selection of Trident contacts are listed below. Platings: Tin is recommended for most applications (with 50 or fewer mating cycles). It is cost effective and matches
F Series Pushbutton Switches
Switches Features/Benefits Up to poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection
D Subminiature Connectors
Subminiature onnectors Subminiature ontents The ITT annon Subminiature family of connectors has grown to include a wide variety of styles, options and accessories and is often the most economical solution
Connector Dimensions. Part Number
CIRCULAR PLASTIC CONNECTORS CONTACT VERSIONS 3, 4, 7, 9, 12 & 25 position models 1 to 8 amps per contact Mixed signal and power or coax available recognized components File No. 102195 Each connector half
DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS M, SOLDER TYPE
INCH-POUND MIL-DTL-83513/1H 29 October 2008 SUPERSEDING MIL-DTL-83513/1G 25 June 2002 DETIL SPECIFICTION SHEET CONNECTORS, ELECTRICL, RECTNGULR, PLUG, MICROMINITURE, POLRIZED SHELL, PIN CONTCTS, CLSS M,
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
ITT Cannon Military/High Reliability D-Sub connectors
APPLICATIONS FEATURES ITT Cannon Military/High Reliability D-Sub connectors Medical Equipment Hand Held Test Equipment Robotics OPTIMIZATION OF SPACE RECTANGULAR CONNECTOR SUITED FOR NETWORK AND COMMUNICATION
M20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
Preliminary. Datasheet
Features/Benefits IP68 sealed to endure harsh environments,000,000 life cycle Longer solder leads for ease of wire installation Multiple housing styles Up to 5 resistive load Wirelead options available
Ø1,37 (.054) MIN Ø2,67 (.105) MAX Ø1,35 (.053) MAX Ø4,83 (.190) MAX 1,78 (.070) MAX 0,84 (.033) SEE NOTE # 2 1,91 (.075) MIN MIN CLOSED ENTRY CONTACT
SSMB / SSMC This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC). They provide
Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/86/94150234.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
SECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
CALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
Incremental encoders Solid shaft with square flange pulses per revolution
Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil Pulses per revolution up to 5000 High protection up to IP 67 High resistnce
SMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
FILTER RACK & PANEL. connectors
FILTER RACK & PANEL connectors table of contents ARINC 404...3 Layouts...3 Shell Sizes 1-4...4 How to order...5 ARINC 600...6 Layouts...6 Shell Sizes 1-3....7 How to order...9 MIL-DTL-83527...9 Layouts...9
SERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
D-Sub. D Subminiature Selector Guide C. D- Subminiature. Series D*H MIL-DTL D*NM. Wire Gauge Range AWG. up to AWG 20 AWG AWG 18-30
D Subminiature Selector Guide D-Sub D- Subminiature Series D*NM D*H MIL-DTL-24308 Wire Gauge Range WG WG 18-30 up to WG 20 WG 18-30 Mating ycles 500 500 500 RoHS confirm vailable No No Layout 9, 15, 25,
ITT Cannon Military/High Reliability D-Subminiature connectors
ITT Cannon Military/High Reliability D-Subminiature connectors RECTANGULAR CONNECTOR SUITED FOR NETWORK AND COMMUNICATION PORTS ITT Cannon Military/High Reliability D-Subminiature connectors are used in
Quick Reference Guide KOAXXA SMA RF Interconnects
Quick Reference Guide KOXX SM RF Interconnects TE Connectivity introduces its next generation of RF products with KOXX RF interconnects. This product family premiers with the KOXX SM product line that
Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/30 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 1, SIZE 20 SIGNAL
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/40 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, SOCKET CONTACTS, SHELL SIZE 5, SIZE 20 SIGNAL CONTACTS
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
Section : Right ngle Printed ircuit oard Receptacles With Pin ontacts, Right ngle Termination, 0-04P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board
OBSOLETE. NOT the LATEST REVISION. Quick Reference Guide KOAXXA SMA RF Interconnects. KOAXXA.com
Quick Reference Guide KOXX SM RF Interconnects KOXX.com TE Connectivity introduces its next generation of RF products with KOXX RF interconnects. This product family premiers with the KOXX SM product line
Male Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
RF COAXIAL CONNECTORS
RF COAXIAL CONNECTORS 17550 Gillette Avenue, Irvine, California 92614 www.sabritec.com Telephone (949) 250-1244 Fax (949) 250-1009 157 CoAXIAL CONNECTORS SCX Coaxial INTRODUCTION Sabritec offers a complete
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/33 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, PIN CONTACTS, SHELL SIZE 3, SIZE 20 SIGNAL CONTACTS
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
STANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution programmable (interpolated system)
Incrementl encoders Solid shft with clmping or synchro flnge 1 6556 pulses per revolution progrmmle (interpolted system) EIL580P - solid shft - OptoPulse Fetures Size mm Precise opticl sensing (interpolted)
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
SECTION 7 R114 / R115 / R116 / R117 / R112
SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead
N SERIES Coaxial Connectors
Coaxial Connectors Description The Jy Chyun coaxial N connectors are largely products designed to support the applications of the receptor antennas, station equipment, communication systems, and for test
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution
Incrementl encoders Solid shft with clmping or synchro flnge 0 5000 pulses per revolution ExEIL580 - solid shft Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Clmping or synchro flnge
UHV Feedthrough, Conflat compatible flange
NC Interface NC Interface Grounded and Feedthroughs UHV Feedthrough, 110116 Conflat compatible flange UHV female cable 4 assembly, 110180, stainless steel Accufast connector and Kapton insulated coaxial
RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
Hyperboloid Contacts for High Performance Connectors
Hyperboloid Contacts for High Performance Connectors ICS SERIES Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate Contacts are high quality, high reliability hyperboloid
CASS. Consolidated Automated Support System. Mass InterConnect Solutions...creating order out of wiring chaos
CASS Consolidated Automated Support System Mass InterConnect Solutions...creating order out of wiring chaos Consolidated Automated Support System CASS The Consolidated Automated Support System (CASS) is
0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
Quick Reference Guide RF Coaxial Connectors
Quick Reference Guide Coaxial RF Products: Quick View Product Operating Frequency (Max.) Impedance VSWR Durability (Mating Cycles) Operating Temp. Coupling Style Standard 7/16 7 GHz 50 Ω 1.02 + 0.03f up
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/90/101430850.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
UHV Double-Ended SMA Feedthrough, , Conflat compatible flange
SMA Interface SMA Interface Grounded and Feedthroughs UHV Double-Ended SMA Feedthrough, 110730, Conflat compatible flange UHV male SMA cable 5 assembly, 110755, Kapton insulated 50-ohm coaxial cable Features
22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm
ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,
high speed RACk & PANeL connectors
high speed Rk & PNeL connectors technical characteristics specifications temperature rating: -55 c to + 5 c corrosion: MIL-STD-0 Method 0, Test ondition shock: MIL-STD-0 Method, Test ondition Vibration:
QUADRAX /TWINAX CONNECTOR SERIES. MIL-DTL Style Connectors
QUADRAX /TWINAX CONNECTOR SERIES MIL-DTL-8999 Style Connectors QUADRAX AND TWINAX CONNECTORS MIL-DTL-8999 Twinax/Quadrax Plug 0.56 0. 0.85 0.05 Shell Size B Dia. +.008 -.0 K Max S Dia. Max Z Max 9 0.7
QUANTITY DISCOUNTS ARE AVAILABLE FOR CONNECTORS AND ADAPTORS
ONNETORS and DPTORS SUMMRY QUNTITY DISOUNTS RE VILLE FOR ONNETORS ND DPTORS ONNETORS ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ ÂÂ EI Flange 7/16" DIN N FME SM and SM TN UHF Mini-UHF MMX Micro Miniature Reverse
RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402
RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402 RF Connectors Technical Data Sheet PE4790 Configuration SMA Male Reverse Polarity Connector MIL-STD-348 50 Ohms Right
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
CATALOG. AEROSPACE * MEDICAL * AUTOMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949)
CATALOG AEROSPACE * MEDICAL * AUMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949) 636-9677 www.milspecwest.com MICRO CONNECR REFERENCE MILSPECWEST MICROTECH COMTRONICS DESCRIPTION MSW-G-B-02S-040* DP-2S-1 CMR-O2-B-02S
AirBorn 4321 AirBorn Drive Addison, TX United States
AirBorn Series Body Size (number of contacts) Contact Type Hardware Type JULY 2009 AirBorn has been manufacturing high reliability interconnect systems for more than 45 years with leading-edge, innovative
Standard I/O, 15 Position
The 9157 series was specifically designed for portable equipment. AVX now offers this two-part system as a standard product. The fixed SMT socket is designed to be housed within the confined dimensional
AMP Precision Pin and Socket Contacts. Spring, Stainless Steel. Pin
Signal Contacts Type III+, Crimp, Snap-In [.0625 +.0010.0020 [1.588 +0.025 0.051] Body Spring, Stainless Steel Spring, Stainless Steel [9.91] Min. Ferrule, Brass, Nickel Flash.113 [2.87] Max. and See chart.
Cannon Combo D. Specifications. Standard materials & finishes. Materials and Finishes
Cannon Combo D Combination D Subminiature connectors for the advantages of an industry standard shield I/O interconnect, with the flexibility of a customized special, designed for any application. This
RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].
![RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].](/thumbs/90/101629325.jpg "RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].")
RP SMA Male Connector Solder Attachment for PE-SR402AL, PE-SR402FL, PE-SR402FLJ, PE- SR402TN, RG402, Gold Plated Brass Body RF Connectors Technical Data Sheet PE44724 Configuration SMA Male Reverse Polarity
D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB D*U Series Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with
Test Cable Assemblies
Test Cable Assemblies DC-65 GHz 8851 SW Old Kansas Ave. Stuart, FL 34997 USA +1-772-286-9300 +1-800-544-5594 sales@emc-rflabs.com www.emc-rflabs.com Premium Test Cable Lab-Flex 200 Frequency to 31 GHz
SW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
The GPO male interface is compliant to MIL-STD-348, and it is in accordance with MIL-PRF-39012a and DESC 94007/94008.
GPO, GPPO and G3PO Application Notes Corning Gilbert s push-on connector products allow users flexibility in modular and board layout (in high density situations), frequency bandwidths from DC to 100 GHz
SMA Description Applications Features
MCX SMA Description SMA connectors are adaptable to interconnection requirements of both systems and components.s - Corm offers a wide variety of cable connectors,receptacles, feed thrus, end launches,
SPECIFICATIONS MATERIALS. Terminations M1 M2 M3 M51 M52 M53 M54 M6 M6N M7 VS2 V2N VS3 VS4 VS5
M Series Minature SPECIFICTIS CTCT RTING: Dependent upon contact material See page. MECHNICL LIFE: 0,000 make-and-break cycles. CTCT RESISTNCE: 0m max. initial @ -VDC 00m for both silver and gold plated
From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
CTC Series. Environmentally sealed cable-to-cable interconnects
CTC Series Environmentally sealed cable-to-cable interconnects We Connect When it matters most For more than a century, ITT Cannon has developed innovative interconnect solutions for the world s harshest
Cannon Trident T2P Contact. Interconnect Solutions
Cannon Trident T2P Contact Interconnect Solutions Trident T2P stamped and formed contact Technical overview ITT has been manufacturing Trident contacts for decades. These contacts have enjoyed a rich history
SMA - 50 Ohm Connectors
For Flexible Cable Straight Crimp Type Plug - Captivated Contact CABLE TYPE RG-178/U, 196 1.20 +.025 f (GHz) 0-12.4 GHz 142-0402-001 142-0402-006 RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141,
Cannon Trident T2P Contact. Interconnect Solutions
Cannon Trident T2P Contact Interconnect Solutions Trident T2P contact system Features & Benefits ITT introduces a new design and enhanced version of the well known T2P stamped and formed contact system.
Amphenol RF MCX. MCX Connectors MCX. Description. Features/Benefits. Applications
Amphenol RF 20 Connectors Description connectors conform to the European CECC 22000 spec and were introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the
EPIC EAB, EAC, and EPT Series
EPIC EB, EC, and EPT eries Industrial Circular Connectors tandard Off-The-helf... Category Description: ome Target pplications Number of s: Rated Voltage: Rated (Peak) Current: Coupling Type: Housing tyles:
CABLE ASSEMBLY CATALOG
CABLE ASSEMBLY CATALOG AEROSPACE * MEDICAL * AUMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949) 636-9677 www.milspecwest.com MILSPEC CONNECRS Milspecwest is known for Micro connectors. With many years of connector
CA SERIES PRECISION REGULATED, LOW RIPPLE HIGH VOLTAGE DC TO DC CONVERTERS
Proven Reliability CA SERIES PRECISION REGULATED, LOW RIPPLE HIGH DC TO DC CONVERTERS 200V to 2000V @ Watt PRODUCT SELECTION TABLE NOW UL RECOGNIZED PRODUCT DESCRIPTION Precision regulated, very low noise,
D-subminiature Metal Shell and All Plastic Solder Cup and IDC T* Series
D-subminiature Metal Shell and All Plastic Solder Cup and IDC FEATURES Offered in 9, 15, 25, and 37 position plugs and sockets. Available in Solder Cup and IDC (insulation displacement) terminations for
711 Series Single Way DB-1a
711 Series Single Way DB-1a Data Bus Interconnection System Data Bus Interconnection System designed for data transmission as defined by MIL-STD-1553B, STANAG 3838 and DEF STAN 00-18 (Part 2). This system
JULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.
M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
SC39 Quick Release Connectors Derived from MIL-DTL Series III
uick Release Connectors Derived from MIL-DTL-38999 Series III Main Features: CONTACTS More than 30 contacts arrangements Size 8, 12, 16, 20, 22D, 23 contacts Signal, power, twinax, coaxial, quadrax contacts
D-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the
EMI Filtered Connectors from performance to board space, to cost, we offer many reasons and options for managing EMI at the signal & power I/O
MI ed onnectors from performance to board space, to cost, we offer many reasons and options for managing MI at the signal & power I/O Series errite ed onnectors offer a low cost, space saving solution
NEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
Lightning Series Mil-Dtl Fiber Optic Transceiver, RS-485 DC to 1.0MHz Applications, Multimode, 850nM Quad Port, Jam-Nut Receptacle
Lightning Series Mil-Dtl-38999 Fiber Optic Transceiver, RS-485 DC to 1.0MHz pplications, Multimode, 850nM Quad Port, Jam-Nut Receptacle FTURS Suitable for RS-485 datalinks at datarates from DC to 1.0MHz
Pin Contacts Military Part No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.
EXTENDED DUTY CRIMP CONTACTS SIZE #12 COAXIAL CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches