2.19. Fixing systems for installing luminaires. Complete systems and single components

Transcription

1 .19 for installing luminaires Complete systems and single components The one-off manufacture of individual assembly systems for installing lighting systems is often very costly. The patented Complete ssembly System is a low-cost, standard fixing system for light fittings on industrial rails, walls or steel beam constructions. Stability and material specially developed shaping method that ensures a high degree of stability is used for this programme. Stainless steel with optimised material strength is used in environments with aggressive media. Components that are not made of stainless steel are hot-dip galvanised after manufacture in accordance with DIN EN ISO ssembly The assembly systems have been designed for inside and outside areas. The compact system kits can be assembled by just one person in a very short time. ll individual parts are simply fitted together and fastened by screws. Since there is no need for drilling or welding, it is possible to work in hazardous areas without a hot work permit. Safety The assembly system is always installed from the safe side of the work platform, i.e. without scaffolding! The specified handrail height and the avoidance of protruding metal parts or screws in the construction provides a high standard of safety. Cost-saving maintenance The use of tilting luminaire masts results in decisive cost advantages due to minimised maintenance. Thus, for example, changing a lamp without scaffolding or assembly aids is possible for just one person in a very short time. The costs for cleaning and repair work can also be minimised. Features Easy to install Corrosion protected (stainless steel or hot-dip galvanized) Extra solid construction ensures high wind load resistance 1..1 ETON

2 Type OU Order No. Pole-system bent 90 Light pole, 90 bend and drilling hole f. LTR 48 and LTRS 48: type LM 48-0/0 - FT, hot-dip galvanized Light pole 90 bend and drilling hole f. LTR 48 and LTRS 48: type LM 48 - /0 - FT, hot-dip galvanized Light fitting support pipe with cable outlet: type LTR FT, hot-dip galvanized Light fitting support pipe with cable outlet: type LTR FT, hot-dip galvanized Light fitting support pipe with cable outlet: type LTR FT, hot-dip galvanized Light fitting support pipe clamp 90 twisted: type LTRS 48 - FT, hot-dip galvanized Pole-system bent Light pole, bend, for pole-mounting light fittings: type LMZ 48 - /190 - FT, hot-dip galvanized Light pole, bend,, e.g. for floodlights: type LM 48 - /190 - FT, hot-dip galvanized Light pole whip form, bend: type LMP 48 - /10 - FT, hot-dip galvanized Light pole whip form, bend: type LMP /10 - FT, hot-dip galvanized Light pole whip form, bend: type LMP /800 - FT, hot-dip galvanized Wall-mounted light pole whip form, bend, with cable outlet: type LMW /10 - FT, hot-dip galvanized Wall-mounted light pole whip form, bend, with cable outlet: type LMW /800 - FT, hot-dip galvanized Light pole fixture for wall mounting, set pcs.: type LMHW 48 - FT, hot-dip galvanized Light pole clamp Light pole clamp, fixed, UMHS 48/48 - FT, hot-dip galvanized Light pole clamp, fixed, with pole slip protection UMHSD 48/48 - FT, hot-dip galvanized Light pole clamp, swivel, with pole slip protection, UMHK 48/48 - ER, stainless steel Light pole clamp, fixed, UMHS 48/48 - ER, stainless steel Light pole clamp, fixed, with pole slip protection UMHSD 48/48 - ER, stainless steel Light pole clamp, swivel, with pole slip protection, UMHK 48/48 - FT, hot-dip galvanized End caps for poles and pipes End cap with cable outlet Ø mm: type SEL 48 - K, plastic End cap closed: type SEG 48 - K, plastic End cap open: type SEO 48 - K, plastic Canopy for fluorescent light fittings Canopy for fluorescent light fittings W LSD ER 100 mm length, hole spacing: 400 mm Canopy for fluorescent light fittings W LSD ER 1600 mm length, hole spacing: 700 mm ETON

3 .19 / ccessories/led Modules/Lamps Type OU Order No. Pipe clamps pcs. pipe clamps R1 (1 1/4 ), Ø 38-4 mm with screws and polyamide washer, hot-dip galvanized pcs. pipe clamps R14 (1 1/4 ), Ø 38-4 mm with screws and polyamide washer, stainless steel pcs. pipe clamps R (1 1/ ), Ø mm with screws and polyamide washer, hot-dip galvanized pcs. pipe clamps R4 (1 1/ ), Ø mm with screws and polyamide washer, stainless steel pcs. pipe clamps R3 (''), Ø mm with screws and polyamide washer, hot-dip galvanized pcs. pipe clamps R34 (''), Ø mm with screws and polyamide washer, stainless steel pcs. pipe clamp 8 (1 1/") D mm for B 1.. with screws and polyamide washer, hot-dip galvanized 1 NOR pcs. pipe clamp 9 (") D mm for B 1.. with screws and polyamide washer, hot-dip galvanized 1 NOR pcs. pipe clamp, two-part, for pipe mounting LB 48 - FT with screws and polyamide washer, hot-dip galvanized Fixing accessories pcs. luminaire mounting bracket with angle, wall mounting LH - FT, hot-dip galvanized pcs. luminaire mounting bracket with angle, wall mounting LH 45 - FT, hot-dip galvanized pcs. wall mounting bracket with angle, with screws and polyamide washer, hot-dip galvanized pcs. wall bracket with screws and polyamide washer, hot-dip galvanized 1 NOR pcs. wall bracket W 7,, for pole-mounting fitting Ø 4 mm, hot-dip galvanized pcs. ceiling mounting bracket D 9 with screws and polyamide washer, stainless steel pcs. ceiling mounting bracket 5 with screws and polyamide washer, hot-dip galvanized 1 NOR pcs. C-bracket for luminaire mounting LB-C50 - ER, stainless steel pcs. hexagon screw x 0 for luminaire mounting, with polyamide washer pcs. eye bolt for luminaire mounting, hot-dip galvanized pcs. eye bolt for luminaire mounting, stainless steel pcs. eye bolt - 1 for luminaire mounting, hot-dip galvanized 1 NOR Hexagon box spanner SW 13 for opening/closing fluorescent light fittings ellk/m and nllk/m LED-Modules / Lamps Type pplication Order No K Order No K LED module 400 for ellk 9 0/ incl. conversion kit LED module 800 for ellk 9 036/36 incl. conversion kit LED module 400 for ellk 9 0/ LED Ready LED module 800 for ellk 9 036/36 LED Ready Type pplication Order No. Fluorescent lamp G13 T8/Ø 6 mm W lm Fluorescent lamp G13 T8/Ø 6 mm W lm Fluorescent lamp G13 T8/Ø 6 mm W lm Fluorescent lamp G13 T8 W Ultimate Fluorescent lamp G13 T8 36 W Ultimate Fluorescent lamp G13 T8 58 W Ultimate ETON

4 Dimension drawing.19 Light pole 90 bended Light fitting support pipe with cable outlet Light fitting support pipe clamp 90 twisted: Ø 8, Ø Ø 100 Ø 00 LMZ 48 - /190 - FT LM 48 - /190 - FT LMW /800 - FT LMW /10 - FT 00 Ø 4 00 Ø 8,50 Ø LMP 48 - /10 - FT/ LMP /10 - FT/ LMP /800 - FT LMHW 48 - FT UMHS 48/48 - FT/ER - UMHSD 48/48 - FT/ER 800/10 Bohrung Ø 9 drilling Ø 9 Bohrung Ø 11 drilling Ø / ,5 +0,5 165 UMHK 48/48 - ER / FT End cap SEL 48 / SEG / SEO LSD ER/ LSD ER Ø 48 Länge lenght Dimensions in mm ETON 1..11

5 .19 Dimension drawing / ccessories Pipe clamp Pipe clamp LB 48 - FT Leuchtenmontagebügel LH - FT LH 45 - FT D x Ø 9 (85) 9 Type R1/R14 R/R4/8 R3/R34/9 D 38-4 mm mm mm Ø48.3 (1) (68) Wandarm W7 Ceiling bracket D9 C-bracket Eye bolt Ø x Ø ,5 Ø 9, x16 Wandbügel Ceiling bracket 5 R Dimensions in mm 1..1 ETON