One-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. Two-sided rack, hot-dip galvanized

Transcription

1 Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted to form a serial system, with boreholes for anchoring or plugging. Bicycle parking rack Frame of angular section oop 19 mm round tube eight: approx. 510 mm Alternating high and low racks Bicycle wheel width up to 55 mm Low rack one side: approx. 500 mm Two-side depth: approx. 600 mm One-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. 3 Bicycles 1050 mm Bicycles 1750 mm Bicycles 2100 mm Two-sided rack, hot-dip galvanized 2 x 3 Bicycles 1050 mm x 5 Bicycles 1750 mm x 6 Bicycles 2100 mm Bicycle stand with lean-on hoop Frame of angular section oop Ø 19 mm round tube, high and low rack Bicycle wheel width up to 55 mm Lean-on hoop Ø 26.9 mm round tube with reinforced side and eyelet, hoop with plastic coating eight: approx. 850 mm Depth: approx. 950 mm One-sided rack, hot-dip galvanized with lean-on hoop, space between bicycles 350 mm 2 Bicycles 700 mm Figure: 2 racks

2 Bicycle rack Bicycle rack serial parking Sturdy and weatherproof Parking rack made of Ø 12 mm round steel with welded square tube strut 40 x 40 mm. Vertical tube can be fixed by bolts eight approx. 500 mm above ground, for bicycle wheel width up to 55 mm, hot-dip galvanized approx mm approx mm 1600 mm approx. Model Stand-alone construction Stand-alone construction all brackets for casting in concrete for plugging down for plugging down Element length Total length with vertical tube approx. mm one-side one-side one-side Bicycle positioning straight left or straight left or straight left or 90 right right right 45 Number of spaces Spacing mm Depth of stand approx. mm approx.kg Part-No

3 Bicycle rack Individual stands Stand of Ø 12 mm round steel welded to vertical tube 40 x 40 mm height approx. 500 mm above ground, hot-dip galvanized Individual stand for casting in concrete approx.kg Part-No. one-side parking two-side parking Individual stand for plugging down Plugging plate 100 x 150 mm, 4 holes Ø 10 mm one-side parking two-side parking Individual stand for wall mounting straight positioning angled positioning Individual stand for casting in concrete, hot-dip galvanized Stand of Ø 20 mm round steel eight approx. 530 mm above ground Lean-on hoop stand for casting in concrete, hot-dip galvanized Steel tube Ø 42 mm Stand opening approx. 100 mm Total width approx. 200 mm Total length approx mm Total height approx. 850 mm

4 Easy parking of bicycles, theft proof locking, simple installation, high stability Bicycle lean-on hoop Steel tube Ø 60 x 2,5 mm with cross tubes Ø 42 x 2.5 mm total width 800 mm total height 1300 mm approx.kg Part-No. with flat head, for casting in concrete hot-dip galvanized hot-dip galvanized and coated DB B with ball head, for casting in concrete hot-dip galvanized hot-dip galvanized and coated DB B Lean-on hoop, for casting in concrete Can be used on both sides vertical steel tubes Ø 60 mm tubular frame Ø 48 mm total length approx mm height above ground approx. 900 mm completely welded, hot-dip galvanized Bicycle lean-on rack consists of three lean-on hoops of steel tube Ø 48 mm welded on flat bar 100 x 8 mm, 1800 mm long, with holes for plugging down. Total width approx. 700 mm oop spacing approx. 600 mm eight approx. 700 mm 219

5 Lean-on hoop of flat bar steel for casting in concrete, hot-dip galvanized and optionally powder-coated in DB 703 Total height approx mm Flat bar steel 50 x 12 mm without cross bar hot-dip galvanized hot-dip galvanized and coated DB 703 Total width approx.kg Part-No. Part-No 450 mm B 750 mm B 1000 mm B 450 mm B 750 mm B 1000 mm B Flat bar steel 80 x 12 mm without cross bar 450 mm B 750 mm B 1000 mm B 450 mm B 750 mm B 1000 mm B 220

6 Lean-on hoop made of steel tube for casting in concrete, hot-dip galvanized or optionally powder-coated in DB 703 total height approx mm Square tube 60 x 60 mm without cross bar hot-dip galvanized hot-dip galvanized and coated DB 703 Total width approx.kg Part-No. Part-No 450 mm B 750 mm B 1000 mm B 450 mm B 750 mm B 1000 mm B Square tube 60 x 40 mm without cross bar 450 mm B 750 mm B 1000 mm B 450 mm B 750 mm B 1000 mm B Bicycle lean-on hoops are manufactured to order. Orders cannot be cancelled, hoops cannot be returned. 221

7 Lean-on hoop made of steel tube for casting in concrete, hot-dip galvanized and optionally powder-coated in DB 703 Total height approx mm Square tube 80 x 20 mm without cross bar hot-dip galvanized hot-dip galvanized and coated DB 703 Total width approx.kg Part-No. Part-Nr 450 mm B 750 mm B 1000 mm B 450 mm B 750 mm B 1000 mm B Flat bar steel 80 x 12 mm Lean-on hoop of bent design for casting in concrete, hot-dip galvanized and optionally powder-coated in DB 703 total height approx mm without cross bar 750 mm B 1000 mm B 222

8 The functional shape of the aesthetic design of this lean-on hoop allows many different uses. Bicycle lean-on hoop Steel tube Ø 48 mm Total width approx mm eight above ground approx. 850 mm approx.kg Part-No. for casting in concrete hot-dip galvanized hot-dip galvanized and coated DB B for plugging down, with base plate Ø 150 mm and three Ø 14 mm holes hot-dip galvanized hot-dip galvanized and coated DB B Lean-on post with tube ring for plugging down, tube ring outside diameter 300 mm made of steel tube Ø 48 mm, vertical post steel tube Ø 60 mm, with base plate Ø 180 mm and four Ø 12 mm holes. Total height approx. 900 mm hot-dip galvanized and coated DB PB Lean-on barrier Flat bar steel 50 x 12 mm, hot-dip galvanized and coated DB 703, with 2 cross bars of stainless steel tube Ø 48 mm ground surface, total height: 1200 mm width 450 mm width 750 mm width 1000 mm approx.kg Part-No. approx.kg Part-No. approx.kg Part-No B B B Bicycle lean-on hoops are manufactured to order. Orders cannot be cancelled, hoops cannot be returned. 223