CEAG Products Main Catalogue Part 2: Chapter Ex-Control units and control stations. EATON 2.4.1

Transcription

1 CEAG Products Main Catalogue Part : Chapter... Ex-Control units and control stations EATON..

2 .. EATON

3 Ex-Control units and control stations Table of contents. GHG 73 Ex-Installation Switch A.... GHG Control Stations A...8 Ex-moulded plastic control stations GHG Ex-moulded plastic control stations GHG 3... Ex-moulded plastic control stations GHG GHG 3 Control Stations A... Ex-light metal control stations GHG Ex-light metal control stations GHG GHG Control Stations A...8 Ex-stainless steel control stations GHG Ex-stainless steel control stations GHG Ex Control Stations for Individual Configuration...3 Order code for individual control units...3 Ex-control stations - enclosures moulded plastic GHG / Ex-control stations - enclosures GHG 3 /... Ex-control stations - enclosures GHG... Ex-control stations - enclosures GHG Ex-control stations - enclosures GHG Built-in components pushbutton... Built-in components - key-operated pushbutton...8 Built-in components - key-operated switch...0 Built-in components - mushroom-head pushbutton... Built-in components - mini-control switch... Built-in components - potentiometer...70 Built-in components - signal lamp...7 Built-in components - measuring instrument AM /AM Built-in components - control switch Ex 3 and Ex Built-in components - terminals Ex-Control and Signal Units for Panel Mounting...8 Ex-pushbutton for panel mounting...83 Ex-key-operated pushbutton for panel mounting...87 Ex-key-operated switch for panel mounting...90 Ex-mushroom-head pushbutton for panel mounting...93 Ex-mini-control switch for panel mounting...97 Ex-control switch GHG 9 for panel mounting Ex-potentiometer for panel mounting Ex-signal lamp for panel mounting Ex-measuring instrument AM 7 for panel mounting Accessories for panel mounting Ex-Control Switches with Plastic Enclosure..... Ex-control switch GHG 9 and GHG Ex-Light Alloy Control Switches...0 Ex-control switch GHG 9 and GHG Ex-Light Alloy Control Stations... EATON..3

4 Ex-control units and control stations Material selection At the heart of every electrical system is the control station. Even under the most adverse conditions, CEAG control stations can be used and operated reliably. The enclosures consist of impact-resistant thermoplastic, glass-fibre-reinforced polyester, light alloy or stainless steel. The robust materials, thermoplastic and polyester, fulfil the specification for surface resistance < 0 9 Ω required by EN The well-tried enclosure materials have proven their high resistance to chemicals in indoor and outdoor installations especially in the chemical and off-shore industries. All metal parts are made of stainless steel. Combination of moulded plastic enclosures The modular design of the GHG x control-station series lets you combine distri bution modules with screwless snap-on mounting logically and at low cost. Standard sizes enable enclosure mounting via flanged joints. The screwless snap-on mounting system also allows the attachment of plastic or brass flanges on the enclosures. This mounting technique also lets you quickly and easily retrofit cable entries on the flanges. System modifications and extensions can thus be implemented in short time and with little effort... EATON

5 Ex-control units and control stations Panel mounting CEAG control and indicating elements can be integrated in panels with a wall thick ness of up to mm. The CEAG components for panel mounting, such as signal lamps, pushbuttons and switches, can be instantly plugged into the control and indicating elements on the panel via a bayonet-ring fitting. The single-wire installation is clear and simple. All panel-mounted apparatus can be retrofitted for cable connection with a slip-on strain relief and protec tive cap and is then completely certified. Planning and procurement of panel-mounted apparatus with different cable lengths is a thing of the past. Installation technology CEAG control stations have a well thought out design concept. The flameproof built-in components, such as signal lamps, pushbuttons and switches, are snap-on mounted to a rail moulded in the enclosure. They can be snapped out of the enclosure to facilitate cable-entry feeding. Notches in the mounting rails define the position of the built-in components and prevent them from being twisted out of place. Low-cut side walls allow a quick and optimised cable connection. CEAG control stations feature standard M moulded-plastic cable entries with an 8 to 7 mm clamping diameter. Alternatively, metal screws and flanges can be used for mounting. The metal flanges enable external earthing. The CEAG control stations are installed using pre-wired connection terminals. The wired built-in components are snap-on mounted on a stainless-steel fold-out mounting frame. To connect the control and indicating elements, the mounting frame is folded out, the cables are quickly and easily fed into enclosure and attached logically to the terminals. EATON..

6 . GHG 73 Ex-Installation Switch A 0 V for Zone,, and The explosion-protected installation switches are for use in the Zones,, and. The materials used have proved to be safe and reliable for both indoor and outdoor installations, in particular in chemical and offshore plants. The robust housings are made of a modified polyamide material. The large actuator surface of the installation switch allows perfect operation, even when wearing working gloves. A protective collar prevents inadvertent operation. The toggle has a luminescent label which is in accordance with 7 of the Workshop Regulations and is also free from radioactive additives. Due to the external fixing facility, the switch can be installed easily while the cover is closed. Cable entry from the top is made possible by turning the base. In special cases a through wiring is possible as one can see on the illustration opposite. Features Large toggle also for working gloves Safety standard IP Cable entry from the top or bottom Connecting terminals easily accessible.. EATON

7 Ex-installation switch Switch/Pushbutton Technical data Ex-installation switch and Ex-pushbuttons Marking accd. to 0/3/EU D II G Ex de IIC T / D II D Ex td A IP T80 C EC-Type Examination Certificate PTB 98 ATEX 3 IECEx Certificate of Conformity IECEx BKI Marking accd. to IECEx Ex ed IIC T Ex td A IP T7 C Permissible ambient temperature 0 C up to +0 C C up to + C (option) Rated voltage 0 V, 0-0 Hz Rated current A Connecting terminals Switch terminals: x. mm / PE-terminals: x. mm Degree of protection accd. to EN 09 IP Cable glands ) Ex e cable glands max. x M; x M0 thread Weight 0.3 kg Enclosure material Polyamide Ordering details Type Circuit Cable glands ) Order No. ON-OFF switch -pole x M GHG R007 - C up to + C x M GHG R008 L L(N) x M0 ) GHG R0003 x M GHG R00 Change-over switch x M GHG R00 - C up to + C x M0 ) GHG R0003 L x M GHG R00 x M GHG R907 Pushbutton x M GHG R000 - C up to + C x M GHG R0007 L L(N) x M GHG R000 ) Base enclosure can be rotated after wards (entry from top or down) ) Threaded only Other versions available on request Dimension drawing 8 X7 8 X7 X 8 X 8 3 Switch/pushbutton 3 X = fixing dimension 0 Dimensions in mm EATON..7

8 . GHG Control Stations A Moulded plastic for Zone,, and Reliable control of processes Even under the most adverse conditions, CEAG control stations can be used and operated reliably. The enclosures consist of low-temperature impact-resistant thermoplastic which fulfils the requirements of EN 0079 and provides a high resistance to chemicals. The well thought out design with low side walls allows optimum cable connection. Modular design Quick fixing allows up to three CEAG built-in components, such as signal lamps, pushbuttons and switches, to be snapped on a rail in the enclosure. They can be snapped out of the enclosure to facilitate cable-entry feeding. Notches in the mounting rails prevent the built-in components from being twisted out of place. Easy to install Wall mounting can be carried out via easily accessible fixing apertures when the enclosure cover is sealed. CEAG mounting pla tes offer a time-saving fixing tech nique. CEAG control stations feature standard M moulded-plastic cable entries with an 0 to 7. mm clamping diameter. Coupling pieces link enclosures to each other and prevent them from being twisted out of place. Alternatively, metal screws and flanges can be used for mounting the metal flanges also enable external earthing. Free mounting areas can be provided for retrofitting certified CEAG components. These are then factory sealed with blanking elements Features Flat side walls Quick fixing of all built-in components High chemical resistance Different enclosures can be combined..8 EATON

9 Ex-moulded plastic control stations GHG Type 83 Type 8 Type 8 Technical data Ex-control stations Type 8 I Type 8 I Type 83 Marking accd. to 0/3/EU D II G Ex ed ib m IIC T D II D Ex td A IP T80 C EC-Type Examination Certificate PTB 00 ATEX 37 IECEx Certificate of Conformity IECEx BKI Marking accd. to IECEx Ex e II T, Ex e ib IIC T, Ex ed IIC T or Ex ed ib IIC T Permissible ambient temperature 0 C up to +0 C C up to + C (option) Rated voltage 90 V AC Rated current A Rated making-/rated breaking capacity accd. EN Ex AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e 0. A Connecting terminals x. mm Protection class I Degree of protection accd. to EN 09 IP (standard) Cable glands/gland plates/enclosure drilling x M cable gland or x M0 thread with brass flange Enclosure material Polyamide Enclosure colour black Ex3 AC-: U e 30 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 30 V / I e 0. A Dimensions (L x W x H) Weight (empty) Type 8 8 x 8 x 77. mm 0. kg Dimensions (L x W x H) Weight (empty) Type 8 x 8 x 77. mm 0.3 kg Dimensions (L x W x H) Weight (empty) Type 83 x 8 x 77. mm 0. kg Type 8 with measuring instrument AM 7 Movement Moving iron Moving coil Marking accd. to 0/3/EU D II G Ex e II D II G Ex ib IIC Accuracy Class. Class. Overload range 0-fold - sec. 0-fold - sec. -fold - sec. 0-fold - sec. Measuring range n / A 0 - A direct 0-0 ma - 0 ma Inductance Li 0. mh Capacitance Ci 0. nf Open circuit voltage max. Ui 30 V Short circuit current max. Ii 0 ma Connecting terminals x. - mm Weight 0.70 kg ) Base enclosure can be rotated after wards (entry from top or down) Other versions available on request EATON..9

10 Ex-moulded plastic control stations GHG Type Type 8... Type Type Ordering details Type 8 with built-in component Content Built-in components Weight approx. Order No. 3 x pushbutton DRT NO + NC label: 0, I, START, STOP 3 x mushroom-head pushbutton SGTE NO + NC Emergency stop 0.0 kg GHG 800 R kg GHG 800 R000 3 x mushroom-head pushbutton SGTE ( ) NO + NC Emergency stop with key unlocking 0.0 kg GHG 800 R00 3 x double pushbutton DDT NO + NC I 0 label: 0, I, START, STOP 0. kg GHG 800 R x key-operated switch SLS I 0 II NO ( ) SW engaging-engaging-engaging label: I 0 II 0. kg GHG 800 R008 I II I 0 II 3 / 3 3 / x control switch SCT change-over SW engaging-engaging label: HAND AUTO label: 0 I label: I II x control switch SCT NO SW engaging-engaging-engaging label: HAND 0 AUTO label: I 0 II label: Local Remote Auto 0. kg 0. kg 0. kg 0. kg 0. kg 0. kg GHG 800 R0003 GHG 800 R000 GHG 800 R000 GHG 800 R000 GHG 800 R0007 GHG 800 R EATON

11 Ex-moulded plastic control stations GHG Type Type Type Type Ordering details Type 8 with built-in components Content Built-in components Weight approx. Order No. 3 x pushbutton DRT 0. kg GHG 800 R000 NO + NC each label: 0, I, START, STOP 3 X X 3 I 0 3 I 0 3 x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow x double pushbutton DDT NO + NC label: 0, I, START, STOP 0. kg GHG 800 R0003 x double pushbutton DDT NO + NC label: 0, I, START, STOP x mushroom-head pushbutton SGT NO + NC emergency stop 0I / 3 3 x control switch SCT change-over SW engaging-engaging label: 0 I x mushroom-head pushbutton SGTE NO + NC emergency stop 0.7 kg GHG 800 R kg GHG 800 R007 X X x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow x key-operated switch 3 3 I 0 II NO ( ) SW engaging-engaging-engaging label: I 0 II 0. kg GHG 800 R008 EATON..

12 Ex-moulded plastic control stations GHG Type Type Type Type Ordering details Type 83 with 3 built-in components Content Built-in components Weight approx. Order No. X X x signal lamp SIL 0-0 V AC/DC 3 3 coloured lens cover: white, red, green, yellow x pushbutton DRT NO + NC each label: 0, I, START, STOP X X 3 I I 3 X X 3 I 0 HA 3 / 0.7 kg GHG 8300 R000 x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow x double pushbutton DDT NO + NC label: 0, I, START, STOP x mushroom-head pushbutton SGTE NO + NC emergency stop 0.80 kg GHG 8300 R0003 x measuring instrument AM7 CT connection n/a Scale 0 00%/0% x control switch SCT NO + NC SW 8 engaging-engaging-spring return label: 0 I 0.9 kg GHG 8300 R003 x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow x double pushbutton DDT NO + NC label: 0, I, START, STOP x control switch SCT change-over SW engaging-engaging label: HAND - AUTO 0.80 kg GHG 8300 R000.. EATON

13 Ex-moulded plastic control stations GHG Measuring instrument AM7 Ordering details measuring instrument AM7, Type 8 Content Movement Weight Order No. Version direct measurement with x entry and cable gland M 0 - /. A Moving iron 0.70 kg GHG 88 R / 3.7 A Moving iron 0.70 kg GHG 88 R / 7. A Moving iron 0.70 kg GHG 88 R / A Moving iron 0.70 kg GHG 88 R / A Moving iron 0.70 kg GHG 88 R / ma 0-00% / 0% (Ri =30 Ω) Moving coil 0.80 kg GHG 88 R / ma 0-00% / 0% (Ri =30 Ω) Moving coil 0.80 kg GHG 88 R003 Version CT connection n/a with x entry and cable gland M 0 - /. A Moving iron 0.70 kg GHG 88 R / 3.7 A Moving iron 0.70 kg GHG 88 R / 7. A Moving iron 0.70 kg GHG 88 R / A Moving iron 0.70 kg GHG 88 R /. A Moving iron 0.70 kg GHG 88 R / 30 A Moving iron 0.70 kg GHG 88 R / A Moving iron 0.70 kg GHG 88 R / 0 A Moving iron 0.70 kg GHG 88 R / 7 A Moving iron 0.70 kg GHG 88 R / 90 A Moving iron 0.70 kg GHG 88 R /. A Moving iron 0.70 kg GHG 88 R / 0 A Moving iron 0.70 kg GHG 88 R % / 0% Moving iron 0.70 kg GHG 88 R000 Dimension drawing X X3 X7 X7 X7 Type 8 Type 8 Type X9 73 X X = fixing dimension Measuring instrument AM 7 Dimensions in mm EATON..3

14 Accessories for Ex-control stations Size Size Size Accessories Type Application Fixing method OU Order No. Mounting plate for type 8 Size Wall mounting screwless mounting GHG 0 93 R00 Size Pipe clamp screwless mounting GHG 0 93 R00 Size Trellis-work mounting screwless mounting GHG 0 93 R003 Size Wall mounting snap-on) GHG 0 93 R0 Size Trellis-work mounting snap-on) GHG 0 93 R0 Size Pipe clamp snap-on) GHG 0 93 R030 Type Application Fixing method OU Order No. Mounting plate for type 8 and 83 Size Wall mounting screwless mounting GHG 0 93 R00 Size Pipe clamp screwless mounting GHG 0 93 R00 Size Trellis-work mounting screwless mounting GHG 0 93 R00 Size Wall mounting snap-on ) GHG 0 93 R0 Size Trellis-work mounting snap-on ) GHG 0 93 R0 Size Pipe clamp snap-on ) GHG 0 93 R030 Plug-in fastener for CEAG modules with. mm and mm mounting size per pieces 0 GHG 0 93 R00 ) snap-on with snap-on mounting. mm Dimension drawing X X X X Size wall mounting Size pipe mounting Size trellis-work mounting X = fixing dimension Size wall mounting Dimensions in mm.. EATON

15 Ex-moulded plastic control stations GHG 3 Type 3... Type 3... Technical data Ex-control stations Type 3 I Type 3 Marking accd. to 0/3/EU D II G Ex ed ib m IIC T D II D Ex td A IP T80 C EC-Type Examination Certificate PTB 00 ATEX 37 IECEx Certificate of Conformity IECEx BKI Marking accd. to IECEx Ex e II T, Ex e ib IIC T, Ex ed IIC T or Ex ed ib IIC T Permissible ambient temperature 0 C up to +0 C C up to + C (option) Rated voltage 90 V AC (with control switch GHG 3 up to 00 V) Rated current A (with control switch GHG 3 max. 0 A) Rated making-/rated breaking capacity accd. EN Ex AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e 0. A Ex3 AC-: U e 30 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 30 V / I e 0. A Connecting terminals x mm Protection class I Degree of protection accd. to EN 09 IP Cable glands/gland plates/enclosure drilling x M cable gland incl. blanking plug or optional x M0 thread with internal brass plate Enclosure material Polyamide Enclosure colour black Dimensions (L x W x H) Weight (empty) Type 3 x 00 x 90 mm 0.7 kg Dimensions (L x W x H) Weight (empty) Type 3 x 00 x 90 mm 0.70 kg Type 3 with measuring instrument AM 7 Movement Moving iron Moving coil Marking accd. to 0/3/EU II G Ex e II II G Ex ib IIC Accuracy Class. Class. Overload range 0-fold - sec. 0-fold - sec. -fold - sec. 0-fold - sec. indicated :., optional :, :0 Measuring range n / A 0 - A direct 0-0 ma - 0 ma Inductance Li 0. mh Capacitance Ci 0. nf Open circuit voltage max. Ui 30 V Short circuit current max. Ii 0 ma Connecting terminals x. - mm Weight. kg ) Base enclosure can be rotated after wards (entry from top or down) Other versions available on request EATON..

16 Ex-moulded plastic control stations GHG 3 Type Type Type Type Ordering details Type 3 with built-in components Content Built-in components Weight approx. Order No. 3 x pushbutton DRT NO + NC each 3 label: 0, I, START, STOP X X x signal lamp SIL 0-0 V AC/DC 3 I 0 3 x double pushbutton DDT I kg GHG 3 00 R000 coloured lens cover: white, red, green, yellow x double pushbutton DDT NO + NC label: 0, I, START, STOP 0.90 kg GHG 3 00 R000 NO + NC label: 0, I, START, STOP x mushroom-head pushbutton SGTE NO + NC emergency stop x measuring instrument AM CT connection n/a 3 I kg GHG 3 00 R0003 Scale 0 00%/0% x double pushbutton DDT NC + NO label: 0, I, START, STOP 0.9 kg GHG 3 00 R000.. EATON

17 Ex-moulded plastic control stations GHG 3 Type Type Type Ordering details Type 3 with control switch GHG 3 Content Built-in components Weight approx. Order No. 0 I 0 II 90 0 I 90 I I II 90 0 II III I 90 /7 8 / /3 / x control switch GHG 3 change-over SW engaging-engaging label: HAND - AUTO label: 0 I x control switch GHG 3 NO SW engaging-engaging-engaging label: HAND 0 AUTO label: I 0 II x control switch GHG 3 NO + NC SW 8 engaging-engaging-spring return label: 0 I label: AUS-Betrieb-EIN label: 0 IN START x control switch GHG 3 C/O SW engaging-engaging label: I II label: HAND AUTO 0.70 kg 0.70 kg 0.70 kg 0.70 kg 0.70 kg 0.70 kg 0.70 kg 0.70 kg 0.70 kg GHG R0003 GHG R000 GHG R000 GHG R000 GHG R00 GHG R003 GHG R00 GHG R00 GHG R00 x control switch GHG 3 NO + NC SW engaging-engaging-engaging label: I II III 0.8 kg GHG R007 x control switch GHG 3 NO + NC SW 8 engaging-engaging-spring return label: 0 I label: AUS-Betrieb-EIN label: 0 IN START 0.8 kg 0.8 kg 0.8 kg GHG R008 GHG R009 GHG R000 EATON..7

18 Ex-moulded plastic control stations GHG 3 Type Type Type Type Ordering details Type 3 with built-in components Content Built-in components Weight approx. Order No. 0 I 0 II 90 0 I 90 /7 8 / x measuring instrument AM CT connection n/a Scale 0 00%/0% x control switch GHG 3 change-over SW spring return-engaging label: 0 I.3 kg GHG 3 00 R000 x measuring instrument AM CT connection n/a Scale 0 00%/0% x control switch GHG 3 NO SW engaging-engaging-engaging label: I 0 II.3 kg GHG 3 00 R0008 x measuring instrument AM CT connection n/a Scale 0 00%/0% x control switch GHG 3 NO + NC SW 8 engaging-engaging-spring return label: 0 I.3 kg GHG 3 00 R EATON

19 Ex-moulded plastic control stations GHG 3 Type 3... Type Type Ordering details Type 3 with built-in components Content Built-in components Weight approx. Order No. x measuring instrument AM7 CT connection n/a I I 90 / Scale 0 00%/0% x double pushbutton DDT NO + NC label: 0, I, START, STOP x mushroom-head pushbutton SGT NO + NC emergency stop x measuring instrument AM7 CT connection n/a Scale 0 00%/0% x mushroom-head pushbutton SGTE NO + NC emergency stop x control switch GHG 3 change-over SW engaging-engaging label: 0 I x measuring instrument AM7 CT connection n/a Scale 0 00%/0% x mushroom-head pushbutton SGTE NO + NC emergency stop x control switch GHG 3 NO + NC SW 8 engaging-engaging-spring return label: 0 I.0 kg GHG 3 0 R000. kg GHG 3 0 R000. kg GHG 3 0 R00 EATON..9

20 Ex-moulded plastic control stations GHG 3 Type Type Type Ordering details Type 3 with built-in components Content Built-in components Weight approx. Order No. X X x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow x pushbutton DRT NO + NC label: 0, I, START, STOP x mushroom-head pushbutton SGTE NO + NC emergency stop X X 3 I 0 X X. kg GHG 3 R000 x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow x double pushbutton DDT NO + NC label: 0, I, START, STOP 3 I 0 X X 3 I I 0 II ( ) 3 3. kg GHG 3 R000 x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow x double pushbutton DDT NO + NC label: 0, I, START, STOP x mushroom-head pushbutton SGTE NO + NC emergency stop x key-operated switch NO SW engaging-engaging-engaging label: I 0 II. kg GHG 3 R EATON

21 Accessories for Ex-control stations Size Size 3 Size Accessories Type Application Fixing method OU Order No. Mounting plate for type 3 Size Wall mounting screwless mounting GHG 0 93 R00 Size Pipe clamp screwless mounting GHG 0 93 R00 Size Trellis-work mounting screwless mounting GHG 0 93 R00 Size Wall mounting snap on * GHG 0 93 R08 Size Trellis-work mounting snap on * GHG 0 93 R08 Size Pipe clamp snap on * GHG 0 93 R03 Type Application Fixing method OU Order No. Mounting plate for type 3 Size 3 Wall mounting screwless mounting GHG 0 93 R08 Size 3 Pipe clamp screwless mounting GHG 0 93 R00 Size 3 Trellis-work mounting screwless mounting GHG 0 93 R08 Size Wall mounting snap on * GHG 0 93 R08 Size Trellis-work mounting snap on * GHG 0 93 R08 Size Pipe clamp snap on * GHG 0 93 R03 Plug-in fastener for CEAG modules with. mm and mm mounting size per pieces 0 GHG 0 93 R00 * snap-on with snap-on mounting. mm Dimension drawing X88 90 X X9 X X 8 X 97.. Type 3 Type X X Size wall mounting X30 Size X = fixing dimension Size trellis-work mounting Dimensions in mm EATON..

22 .3 GHG 3 Control Stations A Light alloy version for Zone,, and Light-alloy control stations in explosion-protected design are equipped with up to four components. These control stations are made of high-quality cast aluminium-silicon (AlSi). A robust plastic powder coating according to RAL 703 protects the CEAG control stations against aggres sive atmospheres and chemicals. Cover screws as well as all internal and external metal parts are made of stainless steel. CEAG flameproof built-in components, such as signal lamps, pushbuttons and switches, provide snap-on mounting on rails screwed into the enclosures. To facilitate insertion of cables into the entries, the built-in components can be snapped out of the enclosures. Notches in the mounting rails define the position of the built-in components and prevent them from being twisted out of place. Free mounting areas can be provided for retrofitting certified CEAG components. These are then factory sealed with blanking elements. Features High mechanical, chemical and thermal resistance Individual configuration Impact-resistant plastic powder coating.. EATON

23 Ex-light metal control stations GHG 3 Measuring instrument AM7 Type 3 8 Type 3 8 Technical data Ex-control stations Type 3 8 I Type 3 8 Marking accd. to 0/3/EU D II G Ex ed ibm IIC T D II D Ex td A IP T80 C EC-Type Examination Certificate PTB 00 ATEX 37 IECEx Certificate of Conformity IECEx BKI Marking accd. to IECEx Ex e II T, Ex e ib IIC T, Ec ed IIC T or Ex ed ib IIC T Permissible ambient temperature 0 C up to +0 C C up to + C (option) Rated voltage 90 V AC (with control switch GHG 3 to 00 V) Rated current A (with control switch GHG 3 max. 0 A) Rated making-/rated breaking capacity accd. EN Ex AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e 0.8 A Connecting terminals x mm Protection class I Degree of protection accd. to EN 09 IP Cable glands/gland plates/enclosure drilling x M0 threaded entry Enclosure material High quality cast aluminium (AISi) Enclosure colour grey RAL 703 Ex3 AC-: U e 30 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 30 V / I e 0. A Dimensions (L x W x H) Weight (empty) Type 3 8 x 0 x 8 mm 0.8 kg Dimensions (L x W x H) Weight (empty) Type x 0 x 8 mm. kg Type 3 8 with measuring instrument AM 7 Movement Moving iron Moving coil Marking accd. to 0/3/EU D II G Ex e II D II G Ex ib IIC Accuracy Class. Class. Overload range 0-fold - sec. 0-fold - sec. -fold - sec. 0-fold - sec. indicated :., optional :, :0 Measuring range n / A 0 - A direct 0-0 ma - 0 ma Inductance Li 0. mh Capacitance Ci 0. nf Open circuit voltage max. Ui 30 V Short circuit current max. Ii 0 ma Connecting terminals x. - mm Weight. kg ) Base enclosure can be rotated after wards (entry from top or down) Other versions available on request EATON..3

24 Ex-light metal control stations GHG 3 8 Type Type Type Type Ordering details Type 3 8 with built-in components Content Built-in components Weight approx. Order No. 3 x pushbutton DRT NO + NC each 3 label: 0, I, START, STOP X X x signal lamp SIL 0-0 V AC/DC 3 I 0 3 x double pushbutton DDT I 0 3. kg GHG R000 coloured lens cover: white, red, green, yellow x double pushbutton DDT NO + NC label: 0, I, START, STOP.30 kg GHG R000 NO + NC label: 0, I, START, STOP x mushroom-head pushbutton SGTE NO + NC emergency stop x measuring instrument AM CT connection n/a 3 I 0.30 kg GHG R0003 Scale 0 00%/0% x double pushbutton DDT NO + NC label: 0, I, START, STOP.3 kg GHG R000.. EATON

25 Ex-light metal control stations GHG 3 8 Type Type Type Ordering details Type 3 8 with built-in components Content Built-in components Weight approx. Order No. X X x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow x pushbutton DRT NO + NC label: 0, I, START, STOP x mushroom-head pushbutton SGTE NO + NC emergency stop X X 3 I 0 X X 3 x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow x double pushbutton DDT NO + NC label: 0, I, START, STOP.0 kg GHG R000 I 0 X X 3 I 0 3 I 0 II ( ) kg GHG R000 x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow label: I 0 II x double pushbutton DDT NO + NC label: 0, I, START, STOP x mushroom-head pushbutton SGTE NO + NC emergency stop x key-operated switch NO SW engaging-engaging-engaging label: I 0 II.0 kg GHG R EATON..

26 Ex-light metal control stations GHG 3 8 Measuring instrument AM7 Ordering details Type 3 8 with measuring instrument AM7 Content Movement Weight approx. Order No. Version direct measurement with x threaded entry M0 0 /. A Moving iron. kg GHG 3 88 R / 3.7 A Moving iron. kg GHG 3 88 R / 7. A Moving iron. kg GHG 3 88 R / A Moving iron. kg GHG 3 88 R / A Moving iron. kg GHG 3 88 R / ma 0-00% / 0% (Ri =30 Ω) Moving coil.3 kg GHG 3 88 R / ma 0-00% / 0% (Ri =30 Ω) Moving coil.3 kg GHG 3 88 R003 Version CT connection n/a with x threaded entry M0 0 /. A Moving iron. kg GHG 3 88 R / 3.7 A Moving iron. kg GHG 3 88 R / 7. A Moving iron. kg GHG 3 88 R / A Moving iron. kg GHG 3 88 R /. A Moving iron. kg GHG 3 88 R / 30 A Moving iron. kg GHG 3 88 R / A Moving iron. kg GHG 3 88 R / 0 A Moving iron. kg GHG 3 88 R / 7 A Moving iron. kg GHG 3 88 R / 90 A Moving iron. kg GHG 3 88 R /. A Moving iron. kg GHG 3 88 R / 0 A Moving iron. kg GHG 3 88 R % / 0% Moving iron. kg GHG 3 88 R0033 Dimension drawing Z Z Z 0 X 0 X 0 X 0 X8 0 8 X Ø Z X8 0 8 Ø Z 0.8 Z Type 3 8 Ø 7 Type 3 8 X = fixing dimension Type 3 8 Dimensions in mm.. EATON

27 EATON..7

28 . GHG Control Stations A Stainless steel version for Zone,, and CEAG explosion-protected control stations made of high-grade 3L stainless steel are designed to accommodate up to four built-in components. These stainless-steel control stations with electro-polished sur faces offer protection for applications in the off-shore industry and at sites with especially severe mechanical, chemical and climatic conditions. CEAG flameproof built-in components, such as signal lamps, pushbuttons and switches, provide snap-on mounting on rails screwed into the enclosures. To facilitate insertion of cables into the entries, the built-in components can be snapped out of the enclosures. Notches in the mounting rails define the position of the built-in components and prevent them from being twisted out of place. Free mounting areas can be provided for retrofitting certified CEAG components. These are then factory sealed with blanking elements. Features High mechanical, chemical and thermal resistance Individual configuration..8 EATON

29 Ex-stainless steel control stations GHG Type 8.. Type GHG 8 Type GHG 8 Technical data Ex-control stations Type 8 I Type 8 Marking accd. to 0/3/EU D II G Ex ed ib m IIC T D II D Ex td A IP T80 C EC-Type Examination Certificate PTB 00 ATEX 37 IECEx Certificate of Conformity IECEx BKI Marking accd. to IECEx Ex e II T, Ex e ib IIC T, Ec ed IIC T or Ex ed ib IIC T Permissible ambient temperature 0 C up to +0 C C up to + C (option) Rated voltage 90 V AC (with control switch GHG 3 up to 00 V) Rated current A (with control switch GHG 3 max. 0 A) Rated making-/rated breaking capacity Ex accd. EN AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A with gold contact points max. 0. A Connecting terminals x mm Protection class I Degree of protection accd. to EN 09 IP Cable glands/gland plates/enclosure drilling x thread Ø mm for cable gland M0 Enclosure material Stainless steel AISI 3 L Ex3 AC-: U e 30 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 30 V / I e 0. A Dimensions (L x W x H) Weight (empty) Type 8 x 0 x 7 mm.0 kg Dimensions (L x W x H) Weight (empty) Type 8 8 x 0 x 7 mm.0 kg Type 8 with measuring instrument AM 7 Movement Moving iron Moving coil Marking accd. to 0/3/EU D II G Ex e II D II G Ex ib IIC Accuracy Class. Class. Overload range 0-fold - sec. 0-fold - sec. -fold - sec. 0-fold - sec. indicated :. Measuring range n / A 0 - A direct 0-0 ma - 0 ma Inductance Li 0. mh Capacitance Ci 0. nf Open circuit voltage max. Ui 30 V Short circuit current max. Ii 0 ma Connecting terminals x. - mm Weight. kg ) Base enclosure can be rotated after wards (entry from top or down) Other versions available on request EATON..9

30 Ex-stainless steel control stations GHG 8 Type Type Type Type Ordering details Type 8 with built-in components Content* Built-in components Weight approx. Order No. 3 x pushbutton DRT NO + NC each 3 label: 0, I, START, STOP X X x signal lamp SIL 0-0 V AC/DC 3 I 0 3 x double pushbutton DDT I kg GHG 800 R000 coloured lens cover: white, red, green, yellow x double pushbutton DDT NO + NC label: 0, I, START, STOP.8 kg GHG 800 R000 NO + NC label: 0, I, START, STOP x mushroom-head pushbutton SGTE NO + NC emergency stop x measuring instrument AM CT connection n/a 3 I 0 *Without external fixing lugs (see accessories NO. 9.30).8 kg GHG 800 R0003 Scale 0 00%/0% x double pushbutton DDT NO + NC label: 0, I, START, STOP.8 kg GHG 800 R EATON

31 Ex-stainless steel control stations GHG 8 Type Type Type Ordering details Type 8 with built-in components Content* Built-in components Weight approx. Order No. X X x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow x pushbutton DRT NO + NC label: 0, I, START, STOP x mushroom-head pushbutton SGT NO + NC emergency stop X X 3 I 0 X X 3 I 0 X X 3 I 0 3 I 0 II 3 3 ( ) *Without external fixing lugs (see accessories NO. 9.30).80 kg GHG 800 R000 x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow x double pushbutton DDT NO + NC label: 0, I, START, STOP.80 kg GHG 800 R000 x signal lamp SIL 0-0 V AC/DC coloured lens cover: white, red, green, yellow x double pushbutton DDT NO + NC label: 0, I, START, STOP x mushroom-head pushbutton SGT NO + NC emergency stop x key-operated switch NO SW engaging-engaging-engaging label: I 0 II.90 kg GHG 800 R EATON..3

32 Ex-stainless steel control stations GHG 8 Type 8.. Ordering details Type 8 with measuring instrument AM7 Content Movement Weight approx. Order No. Version direct measurement with x threaded entry Ø mm (without external fixing lugs) 0 /. A Moving iron. kg GHG 88 R / 3.7 A Moving iron. kg GHG 88 R / 7. A Moving iron. kg GHG 88 R / A Moving iron. kg GHG 88 R / A Moving iron. kg GHG 88 R / ma 0-00% / 0% (Ri =30 Ω) Moving coil.3 kg GHG 88 R / ma 0-00% / 0% (Ri =30 Ω) Moving coil.3 kg GHG 88 R003 Version CT connection n/a with x threaded entry Ø mm (without external fixing lugs) 0 /. A Moving iron. kg GHG 88 R / 3.7 A Moving iron. kg GHG 88 R / 7. A Moving iron. kg GHG 88 R / A Moving iron. kg GHG 88 R /. A Moving iron. kg GHG 88 R / 30 A Moving iron. kg GHG 88 R / A Moving iron. kg GHG 88 R / 0 A Moving iron. kg GHG 88 R / 7 A Moving iron. kg GHG 88 R / 90 A Moving iron. kg GHG 88 R /. A Moving iron. kg GHG 88 R / 0 A Moving iron. kg GHG 88 R % / 0% Moving iron. kg GHG 88 R0033 Accessories Type External fixing lugs ( pcs) Order No. GHG 0 9 R003 Dimension drawing X ) X93. M X ) X33 ) 8 X0. M Type 8 X Type 8 X X = fixing dimension ) Scope of delivery without fixing lugs Type 8 X Dimensions in mm..3 EATON

33 EATON..33

34 . Ex Control Stations for Individual Configuration Moulded-plastic version for Zone. and CEAG control stations can be combined according to customers specifications. Quick fixing allows up to three CEAG built-in components, such as signal lamps, pushbuttons and switches, to be snapped on a rail in the enclosure. The enclosures consist of low-temperature impact-resistant thermoplastic which fulfils the requirements of EN 0079 and provides a high resistance to chemicals. The well thought out design with low side walls allows optimum cable connection. The components can be snapped out of the enclosure to facilitate cable-entry feeding. Notches in the mounting rails prevent the built-in components from being twisted out of place. CEAG s optional mounting plates offer a time-saving fixing technique. Coupling pieces link enclosures to each other and prevent them from being twisted out of place. Alternatively, metal screws and flanges can be used for mounting the metal flanges also enable external earthing. The built-in components differ in size. The diverse enclosure types allow variable combinations of these components. Example diagrams of the enclosure types show the placement options for the built-in components with numbers or predefined positions. Free mounting areas can be provided for retrofitting certified CEAG components. These are then factory sealed with blanking elements. Features Flat side walls Quick fixing for all built-in components High chemical resistance Different enclosures can be combined..3 EATON

35 Ex-control stations Customised control stations, covered by type examination certificates, can be individually combined from CEAG s numerous built-in components. A coding system for these components with unique designations can be used for planning, selection and ordering. The sum of the code numbers designates a complete control station. For the selection of control units and components, please see page..3 pp. Double pushbutton DDT -pole and -pole Pushbutton DRT Signal lamp SIL Measuring instrument AM7 Mushroom-head pushbutton SGTE Control switch SCT Key-operated pushbutton SLT and key-operated switch SLS Control switch GHG 3 Terminal block KLM Potentiometer POT For an easy selection of certified components two temperature information are provided:. Operating temperature range This defines the max. permitted temperature range of component in the installed state. This has to be considered when configuring. Ambient temperature range These temperature range defines the expected ambient temperature range for a fully planned equipment and is based on the experiences of configured devices at normal installation conditions. However, it must be observed in any case, the conditions of the type examination certificate. These temperatures are purely based on explosion protection. Mechanical and electrical function based on the installation situation (e.g. self-heating) have to be considered. For binding function ambient temperatures please refer to the product manual. EATON..3

36 Order code for individual control units Individual control units can be defined by groups of components:. Empty Enclosure. Components per mounting area 3. Accessories. Cable glands Code : Empty enclosure Code : Components per mounting area (max. ) Code for enclosure A C D() (D) E F Mounting area MA A C D() (D) E F Mounting area MA MA 8 A C D() (D) E F Mounting area 3 MA3 MA 8 A C D() (D) E F Mounting area MA MA 3 83 MA 3 Pushbutton DRT -pole -pole Signal lamp SIL 3 MA 3 Doublel-pushbutton DDT -pole -pole Potentiometer POT MA 8 Key-operated pushbutton SLT -pole -pole Control switch Ex 3 Ex 9 3 MA MA Key-operated switch SLS -pole -pole Measuring instrument AM AM 7 MA Mushroom-head pushbutton SGTE SGT Terminal block KLM..3 EATON

37 Order code for individual control units Example: Enclosure Type 3, Code : 3.. Code 3 MA: ZUB 9 Pushbutton (MA), Code MA: DRT 00 Code 3 MA: ZUB 9 Signal lamp (MA3) Code MA3: SIL 0 Code 3 MA3: ZUB 0 Emergency stop Code MA SGTE 3 Code 3 MA: -- Mushroom head pushbutton (MA) Code MA: DDT Code : GEH GK M Double pushbutton (MA) Code 3: Labels and padlocking facility Code : Cable entries and flanges A B C Mounting area MA... A B C Mounting area MA... A B C Mounting area 3 MA3... A B C Mounting area MA... A B C D E Metal flange plate FLM Label with holder ZUB 0 Plastic cable gland GK Padlocking facility mushroom-head pushbutton ZUB Padlocking facility with hammer ZUB 0 Plastic trumpet-shaped cable gland TR Padlocking facility mushroom-head pushbutton ZUB Position for drilling/gland Padlocking facility double pushbutton ZUB EATON..37

38 Ex-control stations - enclosures moulded plastic GHG / 3 Type 8 Type 8 Type 3 Type 3 Technical data Ex-control stations Type. and 3. for individual configuration Marking accd. to 0/3/EU D II G Ex ed ib m IIC T ) D II D Ex td A IP T80 C EC-Type Examination Certificate PTB 00 ATEX 37 ) IECEx Certificate of Conformity IECEx BKI ) Marking accd. to IECEx Ex e II T, Ex e ib IIC T, Ex ed IIC T or Ex ed ib IIC T ) Permissible ambient temperature 0 C up to +0 C ) C up to + C (option) Rated voltage 90 V AC Rated current A Connecting terminals x mm Protection class I Degree of protection accd. to EN 09 IP (standard) Enclosure material Polyamide Enclosure colour black Cable glands/gland plates/enclosure drilling Dimensions (L x W x H) Weight (empty) Components arrangement Type 8 Ex e cable glands max. x M; x M0 thread 8 x 8 x 77. mm 0. kg mounting area Cable glands/gland plates/enclosure drilling Dimensions (L x W x H) Weight (empty) Components arrangement Type 8 Ex e cable glands max. x M; x M0 thread x 8 x 77. mm 0.3 kg mounting areas Cable glands/gland plates/enclosure drilling Dimensions (L x W x H) Weight (empty) Components arrangement Type 83 Ex e cable glands max. x M; x M0 thread x 8 x 77. mm 0. kg 3 mounting areas Cable glands/gland plates/enclosure drilling Dimensions (L x W x H) Weight (empty) Components arrangement Type 3 Ex e cable glands max. x M; 3 x M0 thread x 00 x 90 mm 0.7 kg mounting areas Cable glands/gland plates/enclosure drilling Dimensions (L x W x H) Weight (empty) Components arrangement Type 3 Ex e cable glands max. x M; 3 x M0 thread x 00 x 90 mm 0.70 kg mounting areas ) Data for ready configurated product..38 EATON

39 Ex-control stations - enclosures GHG / 3 Type 3 Type 3 Type 8 Type 8 Ordering codes (Code ). Enclosure. Components arrangement/terminals 3. Labels/. Cable glands Mounting Mounting Mounting Mounting padlocking facility area area area 3 area 8 ) X X X 8 X X X X 83 X X X X X 3 X X X X 3 X X X X X X Possible components (Code ) Component Code Component Code Pushbutton (-pole or -pole ) ) DRT Measuring instrument AM7 ) Double pushbutton (-pole or -pole ) ) DDT Measuring instrument AM Key-operated pushbutton (-pole or -pole ) ) SLT Signal lamp SIL Key-operated switch (-pole or -pole ) ) SLS Potentiometer POT Control switch (-pole or -pole ) ) SCT Terminal block ( mm ) KLM Mushroom-head pushbutton (-pole or -pole ) ) SGT Blanking element BLV Control switch GHG 3 3) ) -pole component not possible ) mounting areas are needed 3) only for type 3., mounting areas are needed EATON..39

40 Ex-control stations - enclosures GHG / 3 Type 8 Type 8 Type 3 Type 3 Mounting areas I Dimension drawing AM Type 8 8 X. X7 AM AM X Type 8 X7 3 AM AM X3 Type 83 X7 AM EX3 Floor AM7 EX3 Floors 00 X88 X Type 3 AM AM7 AM7 00 X EX3 Floor EX3 Floors EX3 Floors X 8 Type 3 X = fixing dimension Dimensions in mm..0 EATON

41 Ex-control stations - enclosures GHG 3 / Type 8 Type 8 Type 3 8 Type 3 8 Technical data Ex-control stations type 3. and. for individual configuration Marking accd. to 0/3/EU D II G Ex ed ib m IIC T ) D II D Ex td A IP T80 C EC-Type Examination Certificate PTB 00 ATEX 37 ) IECEx Certificate of Conformity IECEx BKI ) Marking accd. to IECEx Ex e II T, Ex e ib IIC T, Ex ed IIC T or Ex ed ib IIC T ) Permissible ambient temperature 0 C up to +0 C ) C up to + C (option) Rated voltage 90 V AC Rated current A Connecting terminals see technical data for built-in components PE-connecting terminals x mm Protection class I Degree of protection accd. to EN 09 IP (standard) Type 3 8 Type 3 8 Cable glands/gland plates/enclosure drilling max. x M; x M0 max. x M; x M0 Dimensions (L x W x H) x 0 x 8 mm x 0 x 8 mm Weight (empty) 0.8 kg. kg Enclosure material cast aluminium-silicon (AISi) cast aluminium-silicon (AISi) Enclosure colour grey RAL 703 grey RAL 703 Components arrangement mounting areas mounting areas Cable glands/gland plates/enclosure drilling Type 8 Type 8 max. 3 x Ø for cable gland M0 max. x ø. for cable gland M max. x Ø for cable gland M0 max. x Ø. for cable gland M Dimensions (L x W x H) x 0 x 7 mm 8 x 0 x 7 mm Weight (empty).0 kg.0 kg Enclosure material stainless steel AISI 3 L stainless steel AISI 3 L Enclosure colour polished polished Components arrangement mounting areas mounting areas ) Data for ready configurated product EATON..

42 Ex-control stations - enclosures GHG 3 / Type 3 8 Type 3 8 Type 8 Type 8 Ordering codes (Code ). Enclosure. Components arrangement/terminals 3. Labels/. Cable glands Mounting Mounting Mounting Mounting padlocking facility area area area 3 area 3 8 X X X X 3 8 X X X X X X 8 X X X X 8 X X X X X X Possible components (Code ) Component Code Component Code Pushbutton (-pole or -pole ) ) DRT Measuring instrument AM7 ) Double pushbutton (-pole or -pole ) ) DDT Measuring instrument AM Key-operated pushbutton (-pole or -pole ) ) SLT Signal lamp SIL Key-operated switch (-pole or -pole ) ) SLS Potentiometer POT Control switch (-pole or -pole ) ) SCT Terminal block ( mm ) KLM Mushroom-head pushbutton (-pole or -pole ) ) SGT Blanking element BLV Control switch GHG 3 ) ) mounting areas are needed.. EATON

43 Ex-control stations - enclosures GHG 3 / Type 8 Type 8 Type 3 8 Type 3 8 Mounting areas I Dimension drawing AM AM7 Z Ø Z X 0 Type 3 8 X8 0 8 Z AM AM X 0 Type 3 8 X8 0 8 AM AM7 X ) X93. M Type 8 X AM 3 AM7 X33 ) 8 X0. M Type 8 X = fixing dimension X Dimensions in mm EATON..3

44 Ex-control stations - enclosures GHG Type 3 Type 8 3 Type 9 3 Type 7 3 Technical data Marking accd. to 0/3/EU D II G Ex de ia/ib m [ia/ib] IIC T ) D II D Ex td A IP/IP T80 C EC-Type Examination Certificate PTB 99 ATEX 0 ) IECEx Certificate of Conformity IECEx BKI ) Marking accd. to IECEx Ex de ia/ib m [ia/ib] IIC T.. T ) Ex-control stations Typ, 8, 9, and 7 for individual configuration Ex td A IP T80 C Permissible ambient temperature 0 C up to +0 C ) Rated voltage Rated current Connecting terminals C up to + C (option) 90 V AC 0 A PE-Connecting terminals x mm Protection class Degree of protection accd. to EN 09 Cable glands/gland plates/enclosure drilling Enclosure material Enclosure colour see technical data for built-in components I IP (standard) as ordered accd. to manufacturer s specification glass-fibre reinforced polyester black Type 3 Connecting terminals max. 0 terminals UT Dimensions (L x W x H) 7 x 3 x 3 mm Weight (empty). kg with mounting framework Components arrangement mounting areas Type 8 3 Connecting terminals max. 30 terminals UT Dimensions (L x W x H) 7 x 7 x 3 mm Weight (empty). kg with mounting framework Components arrangement distance 0 mm max. 8 mounting areas distance 0 mm max. mounting areas distance 0 mm max. mounting areas Type 9 3 Connecting terminals max. 0 terminals UT Dimensions (L x W x H) x 7 x 3 mm Weight (empty). kg with mounting framework Components arrangement distance 0 mm max. 3 mounting areas distance 0 mm max. 30 mounting areas distance 0 mm max. mounting areas Type 7 3 Connecting terminals max. 90 terminals UT Dimensions (L x W x H) 87 x 7 x 3 mm Weight (empty). kg with mounting framework distance 0 mm max. mounting areas Components arrangement distance 0 mm max. mounting areas distance 0 mm max. 3 mounting areas ) Data for ready configurated product.. EATON

45 Ex-control stations - enclosures GHG Type 7 3 Type 9 3 Type 8 3 Type 3 Ordering codes (Code ). Enclosure. Components arrangement/terminals 3. Labels/. Cable glands Mounting Mounting Mounting Mounting padlocking facility X X X 8 3 X X X X 9 3 X X X X X 7 3 X X X X X X Possible components (Code ) Component Code Component Code Pushbutton (-pole or -pole ) ) DRT Measuring instrument AM7 ) Double pushbutton (-pole or -pole ) ) DDT Measuring instrument AM Key-operated pushbutton (-pole or -pole ) ) SLT Signal lamp SIL Key-operated switch (-pole or -pole ) ) SLS Potentiometer POT Control switch (-pole or -pole ) ) SCT Terminal block ( mm ) KLM... A ) Mushroom-head pushbutton (-pole or -pole ) ) SGT Terminal block ( mm ) KLM... B Control switch GHG 3 ) Blanking element BLV ) mounting areas are needed ) Serial terminals and PE-Terminal are mounted on a rail below the hinged frame EATON..

46 Ex-control stations - enclosures GHG Type 3 Type 8 3 Type 9 3 Type 7 3 Mounting areas I Dimension drawing Distance between centres 0 mm Distance between centres 0, 0 and 0 mm for positioning of built-in components X 0 3 Distance between centres 0 mm X Z Z 3 Ø 7 Type 3 Type 8 3 X = fixing dimension Dimensions in mm Distance between centres 0 mm 8 7 X X 7 = mounting space for switch, pushbutton (-pole) or signal lamp = mounting space for switch, pushbutton (-pole) ampere- or voltmeter.. EATON

47 Ex-control stations - enclosures GHG Type 7 3 Type 9 3 Type 8 3 Type 3 Mounting areas I Dimension drawing Distance between centres 0 mm Distance between centres 0 mm Distance between centres 0 mm Distance between centres 0 mm Distance between centres 0 mm X 7 3 Distance between centres 0 mm 8 7 X 7 3 X 0 87 X 793 X 7 Type 9 3 Type 7 3 X = fixing dimension Dimensions in mm EATON..7

48 Ex-control stations - enclosures GHG 3 Type 3 3 Technical data Ex-control stations Typ 3 3 for individual configuration Marking accd. to 0/3/EU D II G Ex ed ia/ib m IIC T ) D II D Ex td A IP T80 C EC-Type Examination Certificate PTB 0 ATEX ) Permissible ambient temperature 0 C up to +0 C ) C up to + C (option) Rated voltage 90 V AC Rated current 3 A Connecting terminals as ordered accd. to manufacturer s specification PE-Connecting terminals x mm Protection class I Degree of protection accd. to EN 09 IP Cable glands/gland plates/enclosure drilling as ordered accd. to manufacturer s specification Dimensions (L x W x H) 80 x 80 x 90 mm Weight.3 kg with mounting framework Enclosure material cast aluminium-silicon (AISi) Enclosure colour grey RAL 703 Components arrangement max. 9 mounting areas ) Data for ready configurated product Ordering codes (Code ). Enclosure. Components arrangement/terminals 3. Labels/. Cable glands Mounting Mounting Mounting padlocking facility X X X X X Possible components (Code ) Component Code Component Code Pushbutton (-pole or -pole ) ) DRT Measuring instrument AM7 ) Double pushbutton (-pole or -pole ) ) DDT Measuring instrument AM Key-operated pushbutton (-pole or -pole ) ) SLT Signal lamp SIL Key-operated switch (-pole or -pole ) ) SLS Potentiometer POT Control switch (-pole or -pole ) ) SCT Terminal block ( mm ) KLM... A ) Mushroom-head pushbutton (-pole or -pole ) ) SGT Terminal block ( mm ) KLM... B Control switch GHG 3 ) Blanking element BLV ) mounting areas are needed ) Serial terminals and PE-Terminal are mounted on a rail below the hinged frame..8 EATON

49 Ex-control stations - enclosures GHG 3 Type 3 3 Mounting areas I Dimension drawing Z X Distance between centres 0, 0 and 0 mm for positioning of built-in components Dimensions in mm 0 X 0 0 Z 90 0,8 [, Type 3 3 X = fixing dimension = mounting space for switch, pushbutton (-pole) or signal lamp = mounting space for switch, pushbutton (-pole) ampere- or voltmeter EATON..9

50 Ex-control stations - enclosures GHG. 33 Type 33 Type 8 33 Type 9 33 Type 7 33 Technical data Marking accd. to 0/3/EU D II G Ex de ia/ib m [ia/ib] IIC T ) D II D Ex td A IP/IP T80 C EC-Type Examination Certificate PTB 99 ATEX 0 ) IECEx Certificate of Conformity IECEx BKI ) Marking accd. to IECEx Ex de ia/ib m [ia/ib] IIC T.. T ) Ex-control stations Typ, 8, 9, and 7 stainless steel for individual configuration Ex td A IP T80 C Permissible ambient temperature 0 C up to +0 C ) Rated voltage Rated current Connecting terminals PE-Connecting terminals Protection class Degree of protection accd. to EN 09 Cable glands/gland plates/enclosure drilling Enclosure material Enclosure colour C up to + C (option) 90 V AC 0 A see technical data for built-in components x mm I IP (standard) as ordered accd. to manufacturer s specification Stainless steel AISI 3 L polished Type 33 Connecting terminals max. 0 terminals UT Dimensions (L x W x H) 3. x 7 x mm Weight (empty) 3. kg with mounting framework Components arrangement mounting areas Type 8 33 Connecting terminals max. 30 terminals UT Dimensions (L x W x H) 3. x 3. x mm Weight (empty) 7. kg with mounting framework Components arrangement distance 0 mm max. 8 mounting areas distance 0 mm max. mounting areas distance 0 mm max. mounting areas Type 9 33 Connecting terminals max. 0 terminals UT Dimensions (L x W x H) 7 x 3. x mm Weight (empty). kg with mounting framework Components arrangement distance 0 mm max. 3 mounting areas distance 0 mm max. 30 mounting areas distance 0 mm max. mounting areas Type 7 33 Connecting terminals max. 90 terminals UT Dimensions (L x W x H) 9. x 3. x mm Weight (empty). kg with mounting framework Components arrangement distance 0 mm max. mounting areas distance 0 mm max. mounting areas distance 0 mm max. 3 mounting areas ) Data for ready configurated product..0 EATON

51 Ex-control stations Type 7 33 Type 9 33 Type 8 33 Type 33 Ordering codes (Code ). Enclosure. Components arrangement/terminals 3. Labels/. Cable glands Mounting Mounting Mounting Mounting padlocking facility X X X 8 33 X X X X 9 33 X X X X X 7 33 X X X X X X Possible components (Code ) Component Code Component Code Pushbutton (-pole or -pole ) ) DRT Measuring instrument AM7 ) Double pushbutton (-pole or -pole ) ) DDT Measuring instrument AM Key-operated pushbutton (-pole or -pole ) ) SLT Signal lamp SIL Key-operated switch (-pole or -pole ) ) SLS Potentiometer POT Control switch (-pole or -pole ) ) SCT Terminal block ( mm ) KLM... A ) Mushroom-head pushbutton (-pole or -pole ) ) SGT Terminal block ( mm ) KLM... B Control switch GHG 3 ) Blanking element BLV ) mounting areas are needed ) Serial terminals and PE-Terminal are mounted on a rail below the hinged frame EATON..

52 Ex-control stations - enclosures GHG. 33 Type 33 Type 8 33 Type 9 33 Type 7 33 Mounting area I Dimension drawing Distance between centres 0 mm Distance between centres 0, 0 and 0 mm 3 X 7 Distance between centres 0 mm 3. X Distance between centres 0 mm X3. 3. Type 33 Type 8 33 X = fixing dimension Dimensions in mm 3. X 7 = mounting space for switch, pushbutton (-pole) or signal lamp = mounting space for switch, pushbutton (-pole) ampere- or voltmeter.. EATON

53 Ex-control stations - enclosures GHG. 33 Type 7 33 Type 9 33 Type 8 33 Type 33 Mounting area I Dimension drawing Distance between centres 0 mm Distance between centres 0 mm 0 mm Distance between centres 0 mm Distance between centres 0 mm X Distance between centres 0 mm X X 87 7 X. Type 9 33 Type 7 33 X = fixing dimension Dimensions in mm EATON..3

54 Built-in components pushbutton DRT x -pole DRT x -pole DDT x -pole DDT x -pole Technical data Marking accd. to 0/3/EU Ex-pushbutton DRT and double pushbutton DDT D II G Ex de IIC/IIB Gb / D I M Ex de I Mb EC-Type Examination Certificate IBExU ATEX 030 U IECEx Certificate of Conformity IECEx IBE.000U Marking accd. to IECEx Ex de IIC Gb Ex de IIB Gb Ex de I Mb Operating temperature C up to +80 C (IIC) 0 C up to +80 C (IIB) Application temperature ) C up to + C (IIC) 0 C up to + C (IIB) Rated voltage 00 V AC Rated current A Rated current with gold contact points 0. A Rated making-/rated breaking capacity accd. EN Degree of protection accd. to EN 09 Type of mounting Enclosure colour Gasket material AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A IP (installed condition) DIN rail mounting grey Neoprene (standard), Fluorsilikon or Viton on request -pole version Connecting terminals x. mm Dimensions (L x W x H) 9 x 3 x mm Weight 0. kg -pole version ) Connecting terminals x. mm Dimensions (L x W x H) 9 x 73 x mm Weight 0.3 kg ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. ) The -pole pushbutton needs two mounting areas. The actuator will be in the middle of the two mounting areas... EATON

55 Built-in components pushbutton DDT x -pole DDT x -pole DRT x -pole DRT x -pole Ordering code for component (Code ) Code Component Code A Pushbutton, for enclosure mounting DRT Double pushbutton, for enclosure mounting DDT Code Circuit Contacts Code DRT DDT silver contact points gold contact points C NC 3 NO NO + NC NC NC + 3 NO NC + NO NC + NO NO EATON..

56 Built-in components pushbutton DRT x -pole DRT x -pole DDT x -pole DDT x -pole Ordering code for component (Code ) Code Label Inscription Code Inscription Code D, D 0, I, Start, Stop I 003 I I STOP 00 START 007 emergency stop 008 LANGSAM 009 SCHNELL 00 EMERG.STOP 0 0 ARRET 0 MARCHE 0 AUF 0 AB 07 Neutral white 08 Neutral green 09 0, I, Arret, Marche 00 UP 0 DOWN 0 ZU 0 ON 07 OFF Neutral rot 033 Neutral yellow 03 EIN 03 AUS 037 AUTO 039 HAND 00 SENKEN 0 HEBEN 0 LINKS 03 RECHTS 0 FAST 0 SLOW 0 RESET 07 OPEN 08.. EATON

57 Built-in components pushbutton DDT x -pole DDT x -pole DRT x -pole DRT x -pole Ordering code for component (Code ) Content Circuit Code Ordering code A B C D D Pushbutton with silver contact points Version with standard label (0, I, START, STOP) NC NC 3 DRT NO NO DRT NO + NC NO + NC DRT NC NC 0 DRT NO + NC 3 NO + NC DRT NO + NC NO + NC DRT NC + 3 NO NC + 3 NO 3 DRT NO NO DRT Double pushbutton with gold contact points Version with standard label (0, I, START, STOP) NC NC DDT NO NO 7 DDT NO + NC NO + NC 8 DDT NC NC DRT NO + NC 3 NO + NC DRT NO + NC NO + NC 7 DRT NC + 3 NO NC + 3 NO 8 DRT NO NO 9 DRT EATON..7

58 Built-in components - key-operated pushbutton Technical data SLT x -pole Marking accd. to 0/3/EU SLT x -pole Ex-key-operated pushbutton SLT D II G Ex de IIC/IIB Gb / D I M Ex de I Mb EC-Type Examination Certificate IBExU ATEX 030 U IECEx Certificate of Conformity IECEx IBE.000U Marking accd. to IECEx Ex de IIC Gb / Ex de IIB Gb / Ex de I Mb Operating temperature range C up to +80 C (IIC) / 0 C up to +80 C (IIB) Application temperature ) C up to + C (IIC) / 0 C up to + C (IIB) Rated voltage 00 V AC Rated current A Rated current with gold contact points 0. A Rated making-/rated breaking capacity accd. EN Degree of protection accd. to EN 09 Type of mounting Enclosure colour Gasket material Latch point AC-: U e 0 V / I e A / U e 00 V / I e A DC-3: U e V / I e A / U e 0 V / I e A IP (installed condition) DIN rail mounting grey Neoprene (standard), Fluoric Silicone or Viton on request CEAG (others on request) -pole version Connecting terminals x. mm Dimensions (L x W x H) 9 x 3 x mm Weight 0. kg -pole version ) Connecting terminals x. mm Dimensions (L x W x H) 9 x 73 x mm Weight 0.3 kg ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. ) The -pole pushbutton needs two mounting areas. The actuator wil be in the middle of the two mounting areas. Ordering code for component (Code ) Content Circuit Code Ordering code A B C D D Key-operated pushbutton with silver contact points Version with contact function: lockable/removable/lockable/removable (Code 0) NC NC 3 SLT NO NO SLT NO + NC NO + NC SLT NO + NC NO + NC SLT NC NC 0 SLT NO NO SLT NO + NC 3 NO + NC SLT NO + 3 NC NO + 3 NC 3 SLT Key-operated pushbutton with gold contact points Version with contact function: lockable/removable/lockable/removable (Code 0) NO + NC NO + NC 7 SLT NC NC SLT NO NO 9 SLT NO + NC 3 NO + NC SLT NO + 3 NC NO + 3 NC 8 SLT EATON

59 Built-in components key-operated pushbutton SLT x -pole SLT x -pole Ordering code for component (Code ) Code Component Code A Key-operated pushbutton SLT Code Circuit Contacts Code silver contact points gold contact points C NC 3 NO NO + NC 3 8 NC () NC + 3 NO 3 () NC + NO 3 7 () NC + NO () NO () Code Function Pushbutton not pressed Key Pushbutton pressed Key Code D lockable removable lockable removable 0 lockable removable lockable not removable lockable removable not lockable not removable lockable not removable lockable removable 3 not lockable not removable lockable removable not lockable removable auto lockable removable EATON..9

60 Built-in components - key-operated switch SLS x -pole SLS x -pole Technical data Marking accd. to 0/3/EU Key-operated switch SLS D II G Ex de IIC/IIB Gb / D I M Ex de I Mb EC-Type Examination Certificate IBExU ATEX 030 U IECEx Certificate of Conformity IECEx IBE.000U Marking accd. to IECEx Ex de IIC Gb Ex de IIB Gb Ex de I Mb Operating temperature range C up to +80 C (IIC) 0 C up to +80 C (IIB) Application temperature ) C up to + C (IIC) 0 C up to + C (IIB) Rated voltage 00 V AC Rated current A Rated current with gold contact points 0. A Rated making-/rated breaking capacity accd. EN Switching system Degree of protection accd. to EN 09 Type of mounting Enclosure colour Latch point AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e 0.8 A U e 0 V / I e 0. A engaging engaging engaging IP (installed condition) DIN rail mounting grey CEAG (others on request) -pole version Connecting terminals x. mm Dimensions (L x W x H) 9 x 3 x mm Weight 0. kg -pole version ) Connecting terminals x. mm Dimensions (L x W x H) 9 x 73 x mm Weight 0.3 kg ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. ) The -pole pushbutton needs two mounting areas. The actuator will be in the middle of the two mounting areas...0 EATON

61 Built-in components -key-operated switch SLS x -pole SLS x -pole Ordering code for component (Code ) Code Component Code A Key-switch SLS Code Circuit Contacts Code silver contact points gold contact points NO I 0 II 3/3 0 ( ) 90 NO NO NC + NO 3 I 0 II ( ) 90 () () 90 3 NO () 90 3/3 33/ Code Contact label Inscription Code D I 0 II 0 Fern 0 Ort 0 Hand 0 Auto 03 Example for ordering code (Code ) Contact system Ordering code A C D Key switch with silver contact points and label I 0 II 0 SLS SLS EATON..

62 Built-in components - mushroom-head pushbutton SGTE x -pole SGTE x -pole SGT x -pole SGT x -pole Technical data Marking accd. to 0/3/EU Ex-mushroom-head pushbutton (emergency stop SGTE and normal version SGT ) D II G Ex de IIC/IIB Gb / D I M Ex de I Mb EC-Type Examination Certificate IBExU ATEX 030 U IECEx Certificate of Conformity IECEx IBE.000U Marking accd. to IECEx Ex de IIC Gb Ex de IIB Gb Ex de I Mb Operating temperature range C up to +80 C (IIC) 0 C up to +80 C (IIB) Application temperature ) C up to + C (IIC) 0 C up to + C (IIB) Rated voltage 00 V AC Rated current A Rated current with gold contact points 0. A Rated making-/rated breaking capacity accd. EN Degree of protection accd. to EN 09 Type of mounting Enclosure colour Gasket material AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A IP (installed condition) DIN rail mounting grey Neoprene (standard), Fluoric Silicone or Viton on request -pole version Connecting terminals x. mm Dimensions (L x W x H) 9 x 3 x mm Weight 0. kg -pole version Connecting terminals x. mm Dimensions (L x W x H) 9 x 73 x mm Weight 0.3 kg ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. ) The -pole pushbutton needs two mounting areas. The actuator will be in the middle of the two mounting areas. The pushbutton Emergency Stop will be equipped with a black plate in the centre of the pushbutton actuator... EATON

63 Built-in components - mushroom-head pushbutton SGT x -pole SGT x -pole SGTE x -pole SGTE x -pole Ordering code for component (Code ) Code Component Code A Mushroom-head pushbutton SGT Mushroom-head pushbutton (emergency stop) SGTE Code Circuit Contacts Code silver contact points gold contact points C NC 3 NO NO + NC 3 8 NC NC + 3 NO NC + NO NC + NO NO EATON..3

64 Built-in components - mushroom-head pushbutton SGTE x -pole SGTE x -pole SGT x -pole SGT x -pole Ordering code for component (Code ) Code Label Inscription Code Inscription Code D emergency stop (German - Englisch) ) 0 00 emergency stop (German - French) ) I I 00 0, I, START, STOP 0 STOP emergency stop 008 I 03 SCHNELL 00 I I 0 _ 0 0 MARCHE 0 STOP 0 AB 07 START 07 Neutral green 09 LANGSAM 09 UP 0 SCHNELL 0 ZU 0 _ OFF 08 ARRET - 03 MARCHE Neutral yellow 03 0, I, Arret, Marche 0 AUS 037 UP HAND 00 DOWN HEBEN 0 ZU RECHTS 0 ON 7 SLOW 0 OFF 8 OPEN Code Mushroom head inscription Colour Code E red yellow ) black ) 3 pushbutton Code Function released engaged unlocking Code F not lockable not lockable n/a (pushbutton function) ) not lockable lockable hand released not lockable lockable key released 3 ) only SGTE ) only SGT.. EATON

65 Built-in components - mushroom-head pushbutton SGT x -pole SGT x -pole SGTE x -pole SGTE x -pole Ordering code for component (Code ) Circuit Ordering code A C D E F EMERGENCY STOP mushroom-head pushbutton red, with silver contact points Version with inscription D/E, hand released NC SGTE 0 3 NO SGTE 0 NO + NC SGTE 0 NO + NC SGTE 0 NC SGTE 0 0 NO SGTE 0 3 NO + NC SGTE 0 NO + 3 NC SGTE 0 3 Mushroom-head pushbutton with silver contact points, without locking, mushroom head, black Version with standard label (0, I, START, STOP) NC SGT NO SGT NO + NC SGT NO + NC SGT NC SGT NO SGT NO + NC SGT NO + 3 NC SGT EATON..

66 Built-in components - mini-control switch SCT x -pole SCT x -pole Technical data Marking accd. to 0/3/EU Ex-Mini-control switch SCT D II G Ex de IIC/IIB Gb / D I M Ex de I Mb EC-Type Examination Certificate IBExU ATEX 030 U IECEx Certificate of Conformity IECEx IBE.000U Marking accd. to IECEx Ex de IIC Gb Ex de IIB Gb Ex de I Mb Operating temperature range C up to +80 C (IIC) 0 C up to +80 C (IIB) Application temperature ) C up to + C (IIC) 0 C up to + C (IIB) Rated voltage 00 V AC Rated current A Rated current with gold contact points 0. A Rated making-/rated breaking capacity accd. EN Degree of protection accd. to EN 09 Type of mounting Enclosure colour AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A IP (installed condition) DIN rail mounting grey -pole version Connecting terminals x. mm Dimensions in mm (L x W x H) 9 x 3 x Weight 0. kg -pole version) Connecting terminals x. mm Dimensions (L x W x H) 9 x 73 x mm Weight 0.3 kg ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. ) The -pole pushbutton needs two mounting areas. The actuator will be in the middle of the two mounting areas... EATON

67 Built-in components - mini-control switch SCT x -pole SCT x -pole Ordering code for component (Code ) Code A - C - D - E Code Component Ordering code A Mini Control switch SCT Code Switching system Version Code C spring engaging spring O O v engaging engaging engaging O O engaging engaging 90 O 7 spring engaging engaging 7 O O 8 engaging engaging spring 8 O O 9 engaging spring 9 90 O EATON..7

68 Built-in components - mini-control switch SCT x -pole SCT x -pole Ordering code for component (Code ) Code A - C - D - E Code Circuit Contacts Code silver contact points gold contact points D 3 / / v v /3 33/ EATON

69 Built-in components - mini-control switch SCT x -pole SCT x -pole Ordering code for component (Code ) Code Inscription Code Inscription Code E 0 I 0 0 I II 8 I II 0 AUS AUTO EIN 9 STOP START 03 AUS HAND AUTO 0 HAND AUTO 0 ÖRTLICH AUS FERN SENKEN HEBEN 0 START NORMAL STOP REMOTE LOCAL 0 OFF 0 ON 3 I 0 II 07 HAND OFF AUTO AUS BETRIEB EIN 08 0 IN START AUS 0 EIN 09 MAN AUTO AUF 0 AB 0 START STOP 7 Entriegelt 0 Verriegelt HEBEN SENKEN 8 OUT OF HAND OFF ON 9 LOCAL REMOTE AUTO 3 AUS EIN 30 Other lables on request Example for ordering code (Code ) Circuit Switching system Contacts Ordering code Code A C D E Control switch with silver contact points Switch can be locked in all positions I II 0 SCT 0 or 0 0 I 03 SCT 03 or 3 0 I II 0 SCT 0 or 0 I 0 II 0 SCT 0 or 07 I 0 II 0 SCT 0 or 07 0 I 7 07 SCT 7 07 or EATON..9

70 Built-in components - potentiometer Potentiometer Technical data Marking accd. to 0/3/EU Ex-potentiometer POT D II G Ex de IIC/IIB Gb / D I M Ex de I Mb EC-Type Examination Certificate IBExU ATEX 030 U IECEx Certificate of Conformity IECEx IBE.000U Marking accd. to IECEx Ex de IIC Gb Ex de IIB Gb Ex de I Mb Operating temperature range C up to +80 C (IIC) 0 C up to +80 C (IIB) Application temperature ) C up to + C (IIC) 0 C up to + C (IIB) Rated voltage up to 0 V Power consumption (VA) max. W Resistance range Ohm Tolerance ± 0 % Connecting terminals x. mm Degree of protection accd. to EN 09 IP (installed condition) Dimensions (L x W x H) approx. 9 x 3 x mm Weight 0. kg Type of mounting DIN rail mounting Enclosure colour grey Angle of rotation 70 Scale 0-00 % ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. Ordering code for component (Code ) - code A - C Code Component Code A Potentiometer POT Code Resistance Code C 0-00 Ohm Ohm Ohm Ohm Ohm Ohm Ohm 0 Example for ordering code (Code ) Content Code Potentiometer W % tolerance 0-00 Ohm POT Ohm POT Ohm POT EATON

71 Built-in components - signal lamp Signal lamp Technical data Marking accd. to 0/3/EU Ex-signal lamp SIL EC-Type Examination Certificate IBExU ATEX 07 U IECEx Certificate of Conformity IECEx IBE 3.003U Marking accd. to IECEx Ex de IIC/IIB Gb Ex d ia IIC/IIB Gb Operating temperature range C up to +8 C (IIC) 0 C up to +8 C (IIB) Application temperature ) C up to +0 C (IIC) 0 C up to +0 C (IIB) Rated voltage (Ex ed IIC) (Ex d ia IIC) (Ex ed IIC) Rated current 0 V to V 0 V up to 30 V (Ex d ia IIC) V up to V Max. values for Ex ia D II G Ex d e IIC/IIB Gb / D II G Ex d ia IIC/IIB Gb 0 V up to V AC/DC 0 V up to 30 V DC V up to V AC/DC approx. - ma max. ma max. ma Ui = 30 V DC, Ii = 00 ma, Pi = 70 mw Connecting terminals x. mm Degree of protection accd. to EN 09 IP Dimensions (L x W x H) approx. 9 x 3 x mm Weight 0. kg Type of mounting DIN rail mounting Enclosure colour grey ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. Ordering code for component (Code ) - code A - C - D Code Component Code A Signal lamp SIL Code Colour of the lens Code C white yellow red 3 blue green Code Voltage Code D 0 V - V AC/DC 0 0 V - 30 V DC (Ex-i)) 3 V - V AC/DC ) Supply by valve-driver components, e. gl., with data: Uo = 0 V - 8 V DC with Ri = 00 Ω - 00 Ω or Uo = 0 V - 8 V DC with Ri = 00 Ω - 00 Ω No effective Ci and Li values. Example for ordering code (Code ) Content Ordering code A C D Signal lamp SIL (examples) Universal voltage 0 V - 0 V AC/DC white SIL 0 For intrinsically safe circuits 8 V up to 30 V DC blue SIL 3 Low voltage V up to V AC/DC red SIL 3 EATON..7

72 Built-in components - measuring instrument AM /AM 7 AM AM 7 Technical data Ex-measuring instrument AM /AM 7 Moving iron Moving coil Marking accd. to 0/3/EU D II G Ex e II / D II G Ex e mb II D I M Ex e I EC-Type Examination Certificate PTB 99 ATEX 03 U Application temperature 0 C up to +0 C C up to + C (option) Rated voltage up to 0 V (AM ) up to 70 V (AM 7) Power consumption (VA) max. 0.3 A Overload range 0 fold - sec. fold - sec. 0 fold - sec. indicated :., optional :, :0 D II G Ex ib IIC D I M Ex ib I 0 fold - sec. Measuring range max. 0 - A direct / n / A 0/ - ma Inductance Li < 0. mh Capacitance Ci < 0. nf Winding specification of moving coil. windings Internal resistance. Ω ±30 % Open circuit voltage max. Ui 30 V Connecting terminals max. li 0 ma Accuracy Class. Class. Movement Moving iron Moving coil Connecting terminals x. - mm Degree of protection accd. to EN 09 IP (installed condition) Display size 0 x 0 mm (AM ) 8 x 8 mm (AM 7) Weight 0.3 kg Type of mounting DIN rail mounting Enclosure material Polycarbonate..7 EATON

73 Built-in components - measuring instrument AM /AM 7 AM 7 AM Ordering code for component (Code ) Code A - C - D Code Component Code A Measuring instrument AM AM Measuring instrument AM 7 AM 7 Code Movement Code C Direct connection CT connection n/ A CT connection n/ A 3 Power connection 0-0/ ma (Scale 0-00% / 0%) ) Power connection - 0/ ma (Scale 0-00% / 0%) ) Moving-coil connection 0-0/ ma (Scale 0-00% / 0%) ) 3) 7 Moving-coil connection - 0/ ma (Scale 0-00% / 0%) ) 3) 8 Code Measuring range Code Measuring range Code D /. A / 3.7 A ) / 0 A 0 - / 7. A ) / A 0-0 / A ) / 300 A 0 - /. A / 37 A / 30 A ) / 0 A / A / 00 A / 0 A / 70 A / 7 A 0-00 / 900 A 0-0 / 90 A 0 00% / 0% 33 ) Movements 0-0 ma / - 0 ma and with moving-coil connection are only available with scale 0-00 %/0 %v ) Version for direct connection or with CT connection n/ A possible. 3) Moving coil only for Ex-i or Ex-d flameproof applications - Other interchangeable scales available on request Example for ordering code (Code ) Movement Measuring range Ordering code Measuring instrument AM A C D Version with direct connection Direct (moving iron) 0 - /. A AM 0 Direct (moving iron) 0-0 / A AM / ma (moving coil) 0-00% / 0% AM 33-0 / ma (moving coil) 0-00% / 0% AM 33 Moving iron measuring instrument AM 7 Version with CT connection n/a Converter n / A 0-00% / 0% AM7 33 Moving-coil measuring instrument AM (Ex-i application only) Version with direct connection 0-0 / ma 0-00% / 0% AM / ma 0-00% / 0% AM EATON..73

74 Built-in components - control switch Ex 3 and Ex 9 Ex 3 Ex 9 Technical data Ex-Built-in components for individual control stations Control switch Ex 3 and Ex 9 Ex 3 Ex 9 Marking accd. to 0/3/EU D I M Ex d e I Mb D II G Ex de IIC D II G Ex d e IIB/IIC Gb D II G Ex d ia/ib IIB/IIC Gb IECEx Certificate of Conformity IECEx IBE U Marking accd. to IECEx Ex d e I Mb Ex d e IIB/IIC Gb Ex d ia/ib IIB/IIC Gb EC-Type Examination Certificate BVS 3 ATEX E 07U PTB 98 ATEX 8 U Operating temperature range C up to +80 C (IIC) 0 C up to +80 C (IIB) Application temperature ) C up to + C (IIC) 0 C up to + C (IIB) Rated voltage up to 00 V up to 00 V Rated current 0 A A) Rated current with gold contact points 0. A 0. A Rated making-/rated breaking capacity accd. EN AC-: U e 30 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 30 V / I e 0. A 0 C up to +0 C C up to + C (option) AC-: U e 30 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 30 V / I e 0.3 A Connecting terminals x mm x mm or x mm Weight level: level: 3 level: approx. 0. kg approx. 0.3 kg approx. 0. kg approx. 0.0 kg approx. 0. kg Type of mounting DIN rail mounting Enclosure colour grey black ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. ) min. cross section of used cable A:. mm..7 EATON

75 Built-in components - control switch Ex 3 and Ex 9 Ex 9 Ex 3 Ordering code for component (Code ) Code A - C - D - E - F Code Component Code A Ex 3 Ex 3 Ex 9 Ex 9 Code Switching system Code C spring engaging spring O O engaging engaging engaging O O engaging engaging 90 O spring engaging engaging 7 O O engaging engaging spring 8 O O D Contacts Silver contact points Code Contacts Silver contact points Code / I II 0 I I II I I I I 0 II 90 I I 0 II 90 /3 Versions with gold contact points are available on request. Versions with compulsory NO are possible. I I II III 90 0 I I I II 0 II /3 /7 8 /3 / EATON..7

76 Built-in components - control switch Ex 3 and Ex 9 Ex 3 Ex 9 Ordering code for component (Code ) Code A - C - D - E - F Code Inscription (labels) Code Inscription (labels) Code E 0 I 0 0 I II 8 I II 0 AUS AUTO EIN 9 STOP START 03 AUS HAND AUTO 0 HAND AUTO 0 ÖRTLICH AUS FERN SENKEN HEBEN 0 START NORMAL STOP REMOTE LOCAL 0 OFF 0 ON 3 I 0 II 07 HAND OFF AUTO AUS BETRIEB EIN 08 0 IN START AUS 0 EIN 09 MAN AUTO AUF 0 AB 0 START STOP 7 Entriegelt 0 Verriegelt HEBEN SENKEN 8 OUT OF HAND OFF ON 9 LOCAL REMOTE AUTO 3 AUS EIN 30 STOP 0 START HAND AUTO 3 HAND 0 AUTO ON OFF 3 AUF AUS ZU I II III 33 Code Padlocking facility Code F none 0 centre right left 3 Example for ordering code (Code ) Content Component Contacts Label Padlocking facility Ordering code A Switching system B C Code D Code E A B C D E Ex 3 90 O I I - II 0 none 0 Ex Ex 3 O O 3 I II / I II 07 centre Ex Ex 9 90 O 3 I II / I - II 0 left 3 Ex Ex 9 90 O 3 I II I 0 right Ex Other combination available on request..7 EATON

77 Built-in components - terminals UT PE UT MKX Technical data Ex-Built-in components for individual control stations Terminals MXK -Ex UT / UT PE Marking accd. to 0/3/EU D II G Ex e II D II G Ex e II D II D Ex e II EC-Type Examination Certificate PTB 99 ATEX 33U KEMA 0 ATEX 08 U IECEx Certificate of Conformity IECEx KEMA 0.007U Marking accd. to IECEx Ex e II Application temperature 0 C up to + C 0 C up to + C Rated voltage up to 0 V up to 90 V Rated current max. 7 A max. 30 A Connecting terminals mm 0. mm - mm multi-wire 0. mm - mm solid-wire Dimensions (L x W x H). mm width 7.7 mm x. mm Weight 0.0 kg 0.0 kg Type of mounting NS 3 DIN rail mounting NS 3 DIN rail mounting Enclosure colour grey grey EATON..77

78 Built-in components - terminals MKX UT UT PE Ordering code for component (Code ) Code A - C - D - E - F Code Component Code A KLM KLM Code Content Code C Ex-e Ex-i Code Terminal type Code D Terminal block MXK-Ex max. terminals B Terminal insert max. 3 terminals E Terminals UT / UT PE A Code Number of terminals Code E ect. ect. Other variants, e.g. modules with resistors or fine-wire fuses, available on request. Example for ordering code (Code ) Content Number Ordering code A C D E F Terminal block MXK -EX x Ex-e terminals MXK + KLM B 00 0 PE-terminal, Ex-e connection terminals Terminal UK x Ex-e terminals UT + PE-terminals, Ex-e terminals KLM A EATON

79 Built-in components ZUB 7 ZUB 3 ZUB ZUB 0 Ordering code for labels and locking facilities (Code 3) Code A - B - C - D Code Label Code A.0 x 3 mm ZUB x 7 mm with holder ZUB 0 Code Inscription Code B text to be determinated... Code Padlocking facility for operating element Material Code C with flap (blank) pushbutton stainless steel ZUB with flap (red) pushbutton stainless steel ZUB 3 with flap without 0 activated double pushbutton stainless steel ZUB with flap with 0 activated double pushbutton stainless steel ZUB 7 with flap (blank) mushroom-head pushbutton stainless steel ZUB 0 with flap (red) mushroom-head pushbutton stainless steel ZUB 0 with bolt and chain mushroom-head pushbutton stainless steel ZUB Fire alarm (red) with hammer mushroom-head pushbutton stainless steel ZUB Fire alarm (red) with hammer activates alarm when broken stainless steel ZUB 0 with flap, not activated pushbutton plastic ZUB 3 with flap, with activated pushbutton plastic ZUB with flap, with activated mushroom-head pushbutton plastic ZUB with flap, not activated mushroom-head pushbutton plastic ZUB protective collar yellow pushbutton / mushroom-head pushbutton light alloy ZUB 30 protective collar red pushbutton / mushroom-head pushbutton light alloy ZUB 3 Code Mounting area Code D... Example for ordering code Content Number Ordering code A B C D Protective collar yellow at mounting area 3 X ZUB EATON..79

80 Built-in components - accessories Metal flange FLM Cable gland GK Trumpet shaped cable gland TR Screw plug SV Ordering code for cable glands and flanges (Code ) Code A - B - C - D - E Code Content Component Code A Entry type Entry direct in enclosure GEH Entry via plastic flange FLK Entry via metal flange FLM Code Content Component Code B Entry side Entry side on bottom (left or right), Position Entry side on top (left or right) 3, Code Content Component Code C Entry element Only entry OE Threaded entry BO Screw plug SV Cable plastic gland GK Cable metal* gland GM* Cable entry with plastic plug GV Trumpet-shaped plastic gland TR Code Content Component Code D Size M, M, M0, M, M3, M0, M0, M3 M.. Ø, Ø d.. Code Content Component Code E Number Number of entries..(no) Example for ordering code Content Number Ordering code A B C D E cable entries M moulded plastic, Version without plug direct from below into the enclosure GEH GK M EATON

81 EATON..8

82 . Ex-Control and Signal Units for Panel Mounting Certified products for individual designed panels CEAG control and indicating elements can be integrated in panels with a wall thick ness of up to mm. The CEAG components for panel mounting, such as signal lamps, pushbuttons and switches, can be instantly plugged into the control and indicating elements on the panel via bayonet-ring fitting. The single-wire instal lation is clear and simple. All panel-mounted apparatus can be retrofitted for cable connection with a slip-on strain relief and protective cover and is then completely certified. Planning and procurement of panel-mounted apparatus with different cable lengths is a thing of the past. The completely certified measuring instruments for direct and indirect measurement are available for different amperage ranges. The instruments are equipped with a transformer for easy adaptation to other ranges on the interchangeable scales. Features Bayonet-ring catch for quick one-hand mounting Complete certification of built-in apparatus Connection terminals for variable, low-cost wiring Standard actuator-element size of Ø 30. mm..8 EATON

83 Ex-pushbutton for panel mounting Double pushbutton Pushbutton Technical data Pushbutton Typ 8 8 and double pushbutton Typ 8 8 Complete certificate ) Component certificate Marking accd. to 0/3/EU D II G Ex de IIC T D II G Ex de IIC/IIB Gb D I M Ex de I Mb EC-Type Examination Certificate PTB 99 ATEX 03 IBExU ATEX 030 U IECEx Certificate of Conformity IECEx IBE.000 U Marking accd. to IECEx Ex de IIC/IIB Gb Ex de I Mb Operating temperature range - C up to + 80 C C up to +80 C (IIC) 0 C up to +80 C (IIB) Permissible ambient temperature - C up to + 0 C Application temperature ) C up to + C (IIC) 0 C up to + C (IIB) Rated voltage 00 V AC 00 V AC Rated current A A Rated current with gold contact points 0. A 0. A Rated making-/rated breaking capacity accd. EN AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A Connecting terminals x. mm x. mm Degree of protection accd. to EN 09 IP ) / IP ) (double pushbutton) IP00 Dimensions (L x W x H) approx. 0 x 38 x 7 mm approx. 9 x 38 x 7 mm Weight 0. kg 0.0 kg Cable gland Mx. Ø - mm -- Type of mounting Ø 30.3 mm fixing hole Ø 30.3 mm fixing hole Enclosure colour grey grey Gasket material Neoprene (standard), Fluoric Silicone or Viton on request ) with protective cover IP / IP ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. EATON..83

84 Ex-pushbutton for panel mounting Pushbutton Double pushbutton Ordering code for components Code A - B - C - (C) Code A B C C Order No. GHG 8 8 R Code Component Code A Pushbutton GHG 8 8 Double pushbutton GHG 8 8 Code Circuit Contacts Code silver contact points gold contact points B NC 3 NO NO + NC 8 3 Code Inscription (label) Code Inscription Code C, C 0, I, Start, Stop I 03 I I 0 0 STOP 0 START 07 LANGSAM 09 SCHNELL 0 EMERG.STOP 3 ARRET MARCHE AUF AB 7 Neutral white 8 Neutral grün 9 0, I, Arret, Marche 0 UP DOWN ZU ON 7 OFF Neutral rot 33 Neutral yellow 3 EIN 3 AUS 37 Neutral black 38 AUTO 39 Neutral blau 0 HAND 0 SENKEN HEBEN LINKS 3 RECHTS FAST SLOW RESET 7 OPEN 8..8 EATON

85 Ex-pushbutton for panel mounting Double pushbutton Pushbutton Example for order No Content Label Order No. Circuit A B C C Pushbutton without protective cover, silver contact points NC (0, I, START, STOP) GHG R000 NO (0, I, START, STOP) GHG 8 8 R000 NO + NC (0, I, START, STOP) GHG 8 8 R000 Double pushbutton without protective cover, with gold contact points NC (0, I, START, STOP) GHG 8 8 R00 0 NO (0, I, START, STOP) GHG R00 0 NO + NC (0, I, START, STOP) GHG R00 0 Accessories Type OU Order No. Protective cover to meet IP GHG R000 Please pay attention that only order units (OU) according to the ordering details can be delivered. EATON..8

86 Ex-pushbutton for panel mounting Pushbutton Double pushbutton Dimension drawing 8 7 (Double-)pushbutton without protective cover Ø (Double-)pushbutton with protective cover Ø Minimum distances Dimensions in mm..8 EATON

87 Ex-key-operated pushbutton for panel mounting Key-operated pushbutton Technical data Key-operated pushbutton Typ 8 8 Complete certificate) Component certificate Marking accd. to 0/3/EU D II G Ex de IIC T D II G Ex de IIC/IIB Gb D I M Ex de I Mb EC-Type Examination Certificate PTB 99 ATEX 03 IBExU ATEX 030 U IECEx Certificate of Conformity IECEx IBE.000 U Marking accd. to IECEx Ex de IIC/IIB Gb Ex de I Mb Operating temperature range - C up to + 80 C C up to +80 C (IIC) 0 C up to +80 C (IIB) Permissible ambient temperature - C up to + 0 C Application temperature ) C up to + C (IIC) 0 C up to + C (IIB) Rated voltage 00 V AC 00 V AC Rated current A A Rated current with gold contact points 0. A 0. A Rated making-/rated breaking capacity accd. EN AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A Connecting terminals x. mm x. mm Degree of protection accd. to EN 09 IP) IP00 Dimensions (L x W x H) approx. 8 x 38 x 7 mm approx. 33 x 38 x 7 mm Weight 0.30 kg 0.3 kg Cable gland Mx. Ø - mm -- Type of mounting Ø 30.3 mm fixing hole Ø 30.3 mm fixing hole Enclosure colour grey grey Gasket material Neoprene (standard), Fluoric Silicone or Viton on request ) with protective cover IP ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. EATON..87

88 Ex-key-operated pushbutton for panel mounting Key-operated pushbutton Ordering code for components Code A - B - C - (C) Code A B C Order No. GHG 8 8 _ R00 Code Component Code A Key-operated pushbutton GHG 8 Code Circuit Contacts Code silver contact points gold contact points B NC 3 NO NO + NC 8 3 Code released Key engaged Key Code C lockable removable lockable removable 0 lockable removable lockable not removable lockable removable not lockable not removable lockable not removable lockable removable 3 not lockable not removable lockable removable not lockable removable autom. lockable removable Example for order No. Content Label Order No released engaged A B C Key-operated switch with silver contact points, without protective cover NO + NC lockable, Key removable lockable, Key removable GHG 8 8 R00 0 NC lockable, Key removable lockable, Key not removable GHG R00 NO lockable, Key removable not lockable, Key not removable GHG 8 8 R00 Key-operated switch with gold contact points, without protective cover NO + NC lockable, Key removable lockable, Key removable GHG R00 0 NC lockable, Key removable lockable, Key not removable GHG 8 8 R00 NO lockable, Key removable not lockable, Key not removable GHG R00 Accessories Type OU Order No. Protective cover to meet IP GHG R000 Please pay attention that only order units (OU) according to the ordering details can be delivered...88 EATON

89 Ex-key-operated pushbutton for panel mounting Key-operated pushbutton Dimension drawing 7 77 Key-operated switch without protective cover 38 Key-operated switch with protective cover Ø Minimum distances Dimensions in mm 7 EATON..89

90 Ex-key-operated switch for panel mounting Key-operated switch Technical data Key-operated switch Type 8 89 Complete certificate ) Component certificate Marking accd. to 0/3/EU D II G Ex de IIC T D II G Ex de IIC/IIB Gb D I M Ex de I Mb EC-Type Examination Certificate PTB 99 ATEX 03 IBExU ATEX 030 U IECEx Certificate of Conformity IECEx IBE.000 U Marking accd. to IECEx Ex de IIC/IIB Gb Ex de I Mb Operating temperature range - C up to + 80 C C up to +80 C (IIC) 0 C up to +80 C (IIB) Permissible ambient temperature - C up to + 0 C Application temperature ) C up to + C (IIC) 0 C up to + C (IIB) Rated voltage 00 V AC 00 V AC Rated current A A Rated current with gold contact points 0. A 0. A Rated making-/rated breaking capacity accd. EN AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A Connecting terminals x. mm x. mm Degree of protection accd. to EN 09 IP ) IP00 Dimensions (L x W x H) approx. 88 x 38 x 7 mm approx. 39 x 38 x 7 mm Weight 0.30kg 0. kg Cable gland Mx. Ø - mm -- Type of mounting Ø 30.3 mm fixing hole Ø 30.3 mm fixing hole Enclosure colour grey grey Gasket material Neoprene (standard), Fluoric Silicone or Viton on request ) with protective cover IP ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/ EATON

91 Ex-key-operated switch for panel mounting Key-operated switch Ordering code for components A - B - C - (C) Code A B C Order No. GHG 8 89 R Code Component Code A Key-operated switch GHG 8 89 Code Circuit Contacts Code silver contact points gold contact points B NC I 0 II 3/3 7 ( ) 90 NO ( ) I 0 II Code Inscription Code C I II 07 Fern Ort 08 Hand Auto 09 Example for order No. Switching Contact- Label Order No. mechanism system A C D Key-operated switch, without protective cover I 0 II 3/3 I 0 II GHG 8 89 R 07 ( ) FERN 0 ORT GHG 8 89 R HAND 0 AUTO GHG 8 89 R I 0 II GHG 8 89 R 07 I 0 II ( ) FERN 0 ORT GHG 8 89 R HAND 0 AUTO GHG 8 89 R 09 Switch can be locked in all positions and key can be removed in all positions Key-operated switch with gold contact points, without protective cover I 0 II 3/3 I 0 II GHG 8 89 R 7 07 ( ) FERN 0 ORT GHG 8 89 R HAND 0 AUTO GHG 8 89 R I 0 II GHG 8 89 R 8 07 I 0 II ( ) FERN 0 ORT GHG 8 89 R HAND 0 AUTO GHG 8 89 R 8 09 Accessories Type OU Order No. Protective cover to meet IP GHG R000 Please pay attention that only order units (OU) according to the ordering details can be delivered. EATON..9

92 Ex-key-operated switch for panel mounting Key-operated switch Dimension drawing 7 77 Key-operated switch without protective cover Key-operated switch with protective cover Ø Minimum distances Dimensions in mm..9 EATON

93 Ex-mushroom-head pushbutton for panel mounting Mushroom-head pushbutton Emergency-Stop pushbutton Technical data Mushroom-head pushbutton (Emergency stop and normal version) Complete certificate) Component certificate Marking accd. to 0/3/EU D II G Ex de IIC T D II G Ex de IIC/IIB Gb D I M Ex de I Mb EC-Type Examination Certificate PTB 99 ATEX 03 IBExU ATEX 030 U IECEx Certificate of Conformity IECEx IBE.000 U Marking accd. to IECEx Ex de IIC/IIB Gb Ex de I Mb Operating temperature range - C up to + 80 C C up to +80 C (IIC) 0 C up to +80 C (IIB) Permissible ambient temperature - C up to + 0 C Application temperature ) C up to + C (IIC) 0 C up to + C (IIB) Rated voltage 00 V AC 00 V AC Rated current A A Rated current with gold contact points 0. A 0. A Rated making-/rated breaking capacity accd. EN AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A Connecting terminals x. mm x. mm Degree of protection accd. to EN 09 IP) IP00 Dimensions (L x W x H) approx. x 38 x 7 mm approx. 39 x 38 x 7 mm Weight 0.30 kg 0. kg Cable gland Mx. Ø - mm -- Type of mounting Ø 30.3 mm fixing hole Ø 30.3 mm fixing hole Enclosure colour grey grey Gasket material Neoprene (standard), Fluoric Silicone or Viton on request ) with protective cover IP ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. EATON..93

94 Ex-mushroom-head pushbutton for panel mounting Emergency-Stop pushbutton Mushroom-head pushbutton Ordering code for components Code A - B - C - D - E Code A B C D E Order No. GHG 8 8 _ R Code Component Code A Mushroom-head pushbutton GHG 8 8 Code Circuit Contacts Code manual key released silver contact points gold contact points B NC 3 NO NO + NC Code Mushroom-head pushbutton inscription and colour Code C emergency stop EMERGENCY STOP (German - English) ) emergency stop ARRET D URGENCE (German - French) ) red yellow ) black ) 3 Code released engaged unlocking Code D not lockable not lockable n/a (pushbutton function) ) not lockable lockable hand released ) not lockable lockable key released 3 ) Code Inscription (label) Code Inscription Code E 0, I, Start, Stop I 03 I I 0 0 STOP 0 START 07 NOT-AUS) 00 ) only emergency stop mushroom head pushbutton ) only mushroom-head pushbutton normal version..9 EATON

95 Ex-mushroom-head pushbutton for panel mounting Mushroom-head pushbutton Emergency-Stop pushbutton Example for order No. Contact Pushbutton colour Inscription Order No. system A B C D E EMERGENCY STOP mushroom-head pushbutton red, with silver contact points, without protective cover content with inscription D/E, hand released NC red German/English GHG R 00 NC red German/French GHG R 00 NO red German/English GHG 8 8 R 00 NO red German/French GHG 8 8 R 00 NO + NC red German/English GHG 8 8 R 00 NO + NC red German/French GHG 8 8 R 00 Version with inscription D/E, key released NC red German/English GHG R 3 00 NC red German/French GHG R 3 00 NO red German/English GHG 8 8 R 3 00 NO red German/French GHG 8 8 R 3 00 NO + NC red German/English GHG 8 8 R 3 00 NO + NC red German/French GHG 8 8 R 3 00 Mushroom-head pushbutton, with silver contact points, without protective cover version with inscription D/E, pushbutton function only NC black 0, I, START, STOP GHG R 3 0 NC yellow 0, I, START, STOP GHG R 0 NO black 0, I, START, STOP GHG 8 8 R 3 0 NO yellow 0, I, START, STOP GHG 8 8 R 0 NO + NC black 0, I, START, STOP GHG 8 8 R 3 0 NO + NC yellow 0, I, START, STOP GHG 8 8 R 0 Accessories Type OU Order No. Protective cover to meet IP GHG R000 Please pay attention that only order units (OU) according to the ordering details can be delivered. EATON..9

96 Ex-mushroom-head pushbutton for panel mounting Mushroom-head pushbutton Mushroom-head pushbutton Dimension drawing Mushroom-head pushbutton without protective cover with key release Mushroom-head pushbutton without protective cover Mushroom-head pushbutton with protective cover Ø Minimum distances Dimensions in mm..9 EATON

97 Ex-mini-control switch for panel mounting Mini-control switch Technical data Mini-control switch Type Complete certificate ) Component certificate Marking accd. to 0/3/EU D II G Ex de IIC T D II G Ex de IIC/IIB Gb D I M Ex de I Mb EC-Type Examination Certificate PTB 99 ATEX 03 IBExU ATEX 030 U IECEx Certificate of Conformity IECEx IBE.000 U Marking accd. to IECEx Ex de IIC/IIB Gb Ex de I Mb Operating temperature range - C up to + 80 C C up to +80 C (IIC) 0 C up to +80 C (IIB) Permissible ambient temperature - C up to + 0 C Application temperature ) C up to + C (IIC) 0 C up to + C (IIB) Rated voltage 00 V AC 00 V AC Rated current A A Rated current with gold contact points 0. A 0. A Rated making-/rated breaking capacity accd. EN AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A AC-: U e 0 V / I e A U e 00 V / I e A DC-3: U e V / I e A U e 0 V / I e A Connecting terminals x. mm x. mm Degree of protection accd. to EN 09 IP) IP00 Dimensions (L x W x H) approx. 0 x 38 x 7 mm approx. 0 x 38 x 7 mm Weight 0. kg 0.0kg Cable gland Mx. Ø - mm -- Type of mounting Ø 30.3 mm fixing hole Ø 30.3 mm fixing hole Enclosure colour grey grey Gasket material Neoprene (standard), Fluoric Silicone or Viton on request ) with protective cover IP ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. EATON..97

98 Ex-mini-control switch for panel mounting Mini-control switch Ordering code for components Code A - B - C - D - E Code A B C D E Order No. GHG 8 89 _ R Code Component Code A Mini-control switch GHG 8 89 Code Contact material Code B silver 0 gold Code Switching system C spring engaging spring O O engaging engaging engaging O O engaging engaging 90 O spring engaging engaging 7 O O engaging engaging spring 8 O O Code Contacts Code D / / ) only emergency stop mushroom head pushbutton ) only mushroom-head pushbutton normal version 3 7 Code Inscription (label) Code Inscription (label) Code E 0 I 0 HAND 0 AUTO I II 0 AUF AUS ZU STOP START 03 HAND AUS AUTO 7 HAND AUTO 0 0 I II 8 SENKEN HEBEN 0 AUS AUTO EIN 9 REMOTE LOCAL 0 AUS HAND AUTO 0 I 0 II 07 ÖRTLICH AUS FERN AUS BETRIEB EIN 08 START NORMAL STOP AUS 0 EIN 09 OFF 0 ON 3 AUF 0 AB 0 HAND OFF AUTO STOP 0 START 0 IN START..98 EATON

99 Ex-mini-control switch for panel mounting Mini-control switch Example for order No. Switching Code Circuit Code Label Order No. mechanism A B C D Key-operated switch, without protective cover 90 O 90 O 90 O O O O O O O / / I II GHG R I GHG R 0 I II GHG R 0 3 I 0 II GHG R 3 07 I 0 II GHG R I GHG R Accessories Type OU Order No. Protective cover to meet IP GHG R000 Please pay attention that only order units (OU) according to the ordering details can be delivered. Dimension drawing Mini-control switch without protective cover Mini-control switch with protective cover Minimum distances Dimensions in mm EATON..99

100 Ex-control switch GHG 9 for panel mounting Control switch GHG 9 Technical data Control switch GHG 9 Marking accd. to 0/3/EU D II G Ex de IIC/IIB Gb D II G Ex de ib [ia/ib] IIC/IIB Gb EC-Type Examination Certificate BVS ATEX E 07 U ) Operating temperature range C up to +80 C (IIC) C up to +80 C (IIB) Application temperature ) C up to +80 C (IIC) C up to +80 C (IIB) IECEx Certificate of Conformity IECEx BVS.007 U Marking accd. to IECEx Ex de IIC Gb Ex de IIB Gb Rated voltage up to 90 V AC Rated current up to 0 A Rated current with gold contact points up to 0. A Rated making-/rated breaking capacity accd. EN AC-3: U e 30 V / I e 8 A U e 00 V / I e A AC-: U e V / I e A U e 30 V / I e 0. A x. mm flexibel, mm starr 0. kg Ø 30.3 mm fixing hole grey Connecting terminals Weight Type of mounting Enclosure colour ) Must be installed in a certified enclosure ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/ EATON

101 Ex-control switch GHG 9 for panel mounting Control switch GHG 9 Ordering code for component (Code ) Code A - B - C - D ) Code Component Code A Control switch GHG 9 9 Code Switching system Code B spring engaging spring O O engaging engaging engaging O O engaging engaging 90 O spring engaging engaging 7 O O engaging engaging spring 8 O O D Contacts Silver contact points Code Contacts Silver contact points Code I I I 90 I 90 I 0 II II 3 /3 /7 8 /3 / I 0 II 90 I II 0 I 90 /3 /7 9/ 8 0 /3 / Code Inscription (labels) Code Inscription (labels) Code E 0 I 0 0 I II 8 I II 0 AUS AUTO EIN 9 STOP START 03 AUS HAND AUTO 0 HAND AUTO 0 ÖRTLICH AUS FERN SENKEN HEBEN 0 START NORMAL STOP REMOTE LOCAL 0 OFF 0 ON 3 I 0 II 07 HAND OFF AUTO AUS BETRIEB EIN 08 0 IN START AUS 0 EIN 09 MAN AUTO AUF 0 AB 0 START STOP 7 Entriegelt 0 Verriegelt HEBEN SENKEN 8 OUT OF HAND OFF ON 9 LOCAL REMOTE AUTO 3 AUS EIN 30 STOP 0 START HAND AUTO 3 HAND 0 AUTO ON OFF 3 AUF AUS ZU I II III 33 Versions with gold contact points are available on request. ) The code will represent only a selected part of configuration. 9/ EATON..0

102 Ex-control switch GHG 9 for panel mounting Control switch GHG 9 Example for ordering code (Code ) Content A GHG 9 Switching system 90 O Code B Contact Code C Label Code D Order code 3 0 I 09 0 I 0 GHG R00 GHG 9 90 O I 037 STOP START GHG R GHG 9 90 O 7 8 I II /3 / I - II 0 GHG R008 Dimension drawing a 3 Dimensions in mm 30 7 Control switch with dimension a switch compartment 3 mm switch compartments 8 mm 3 switch compartments 99 mm EATON

103 Ex-potentiometer for panel mounting Potentiometer Technical data Potentiometer Type 8 83 Complete certificate) Component certificate Marking accd. to 0/3/EU D II G Ex de IIC T D II G Ex de IIC/IIB Gb D I M Ex de I Mb EC-Type Examination Certificate PTB 99 ATEX 03 IBExU ATEX 030 U IECEx Certificate of Conformity IECEx IBE.000 U Marking accd. to IECEx Ex de IIC/IIB Gb Ex de I Mb Operating temperature range - C up to + 80 C C up to +80 C (IIC) 0 C up to +80 C (IIB) Permissible ambient temperature - C up to + 0 C Application temperature ) C up to + C (IIC) 0 C up to + C (IIB) Rated voltage up to 0 V AC up to 0 V AC Power consumption (VA) max. W max. W Resistance range Ω Ω Tolerance ± 0 % ± 0 % Connecting terminals x. mm x. mm Degree of protection accd. to EN 09 IP) IP00 Dimensions (L x W x H) 0 x 38 x 7 mm 0 x 38 x 7 mm Weight 0.0 kg 0. kg Type of mounting Ø 30.3 mm fixing hole Ø 30.3 mm fixing hole Enclosure colour grey grey Angle of rotation Scale 0-00 % 0-00 % ) with protective cover IP ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. EATON..03

104 Ex-potentiometer for panel mounting Potentiometer Ordering code for component (Code ) - code A - B Code A B Order No. GHG 8 83 R00 Ordering code for component (Code ) - code A - B Code Component Code A Potentiometer GHG 8 83 R00 Code Resistance Code C 0-00 Ohm 0-0 Ohm 0-70 Ohm Ohm 0-00 Ohm Ohm Ohm Example for ordering code (Code ) Content Order No. A B Potentiometer W % tolerance, without protective cover 0-00 Ohm GHG 8 83 R Ohm GHG 8 83 R Ohm GHG 8 83 R00 Accessories Type OU Order No. Protective cover to meet IP GHG R000 Please pay attention that only order units (OU) according to the ordering details can be delivered. Dimension drawing Ø Potentiometer without protective cover Potentiometer with protective cover Minimum distances Dimensions in mm..0 EATON

105 Ex-signal lamp for panel mounting Signal lamp Technical data Signal lamp Type Complete certificate ) Component certificate Marking accd. to 0/3/EU D II G Ex de IIC T D II G Ex d ia IIC/IIB Gb D II G Ex de IIC/IIB Gb D I M Ex d e IIC/IIB Gb EC-Type Examination Certificate PTB 99 ATEX 03 IBExU ATEX 07 U IECEx Certificate of Conformity IECEx IBE.000 U Marking accd. to IECEx Ex de IIC/IIB Gb Ex de I Mb Operating temperature range C up to +8 C (IIC) 0 C up to +8 C (IIB) Permissible ambient temperature C up to + 0 C Application temperature ) C up to +0 C (IIC) 0 C up to +0 C (IIB) Rated voltage Ex ed IIC) (LED) (Ex d ia IIC) (Ex ed IIC) 0 V up to V AC/DC 0 V up to 30 V DC V up to V AC/DC 0 V up to V AC/DC 0 V up to 30 V DC V up to V AC/DC Rated current (0 V up to 0 V) (LED) (0 V up to 30 V Ex d ia IIC) ( V up to V) DC approx. - ma max. ma max. ma max. ma max. ma max. value for Ex ia Ui = 30 V DC, Ii = 00 ma, Pi = 70 mw Ui = 30 V DC, Ii = 00 ma, Pi = 70 mw Connecting terminals x. mm x. mm Degree of protection accd. to EN 09 IP ) IP00 Dimensions (L x W x H) 7 x 38 x 7 mm 99 x 38 x 7 mm Weight 0.0 kg 0. kg Type of mounting Ø 30.3 mm fixing hole Ø 30.3 mm fixing hole Enclosure colour grey grey Angle of rotation Scale 0-00 % 0-00 % ) with protective cover IP ) The limits of the operating temperature range and the max. permissible temperature rise of the components have to be taken into account. See also pages..3/3. EATON..0

106 Ex-signal lamp for panel mounting Signal lamp Ordering code for component (Code ) - code A - B Code A B Order No. GHG R00 Ordering code for component (Code ) - code A - B Code Component Code A Signal lamp GHG R00 Code Voltage Code B 0 V - V AC/DC 0 V - 30 V DC (Ex-i ) ) V - V AC/DC 3 Example for ordering code (Code ) Content Order No. A B Version without protective cover with lens cover yellow, red, green and white Universal voltage 0 V - V AC/DC GHG R00 For intrinsically safe circuits (0 V up to 30 V DC)) GHG R00 Low voltage V up to V AC/DC GHG R00 3 ) Supply by valve-driver components, e.g., with data U o = 0 V 8 V DC with R i = 00 Ω 00 Ω or U o = 0 V 8 V DC with R i = 00 Ω 00 Ω No effective Ci and Li values. Accessories Type OU Order No. Protective cover to meet IP GHG R000 Please pay attention that only order units (OU) according to the ordering details can be delivered. Dimension drawing Signal lamp without protective cover Signal lamp with protective cover Ø Minimum distances Dimensions in mm..0 EATON

107 Ex-measuring instrument AM 7 for panel mounting Interchangeable scales Measuring instrument Technical data Type 8 with measuring instrument AM 7 Moving iron Moving coil Marking accd. to 0/3/EU D II G Ex e II / D II G Ex e mb II D II G Ex ib IIC EC-Type Examination Certificate PTB 00 ATEX 37 PTB 00 ATEX 37 Permissible ambient temperature 0 C up to +0 C C up to + C (option) 0 C up to +0 C C up to + C (option) Rated voltage up to 90 V AC up to 90 V AC Power consumption (VA) max. 0.3 VA max. 0.3 VA Overload range 0 fold - sec. 0-fold - sec. fold - sec. 0 fold - sec. indicated :., optional : Measuring range max. 0 - A direct / n / A 0/ - ma Winding specification of moving coil. windings Internal resistance. Ω ± 30 % Inductance Li < 0. mh Capacitance Ci < 0. nf Open circuit voltage Ui 30 V Short circuit current max. Ii 0 ma Accuracy Class. Class. Connecting terminals x. - mm Degree of protection accd. to EN 09 IP Cable glands/gland plates/enclosure drilling x M cable gland Dimensions (L x W x H) 0 x 9 x mm Display size AM 7 7 x 7 mm Weight 0.8 kg Type of mounting DIN rail mounting Enclosure colour grey EATON..07

108 Ex-measuring instrument AM 7 for panel mounting Measuring instrument Interchangeable scales Ordering code for component (Code ) - code A - B - C Code A B C Order No. GHG 88 R0 _ Ordering code for component (Code ) - code A - B Code Component Code A Measuring instrument AM 7 GHG 88 Code Voltage Code B Direct connection CT connection /A Power connection 0-0/ ma (Scale 0-00% / 0%) ) Power connection - 0/ ma (Scale 0-00% / 0%) ) Moving-coil connection 0-0/ ma (Scale 0-00% / 0%) ) 3) 7 Moving-coil connection - 0/ ma (Scale 0-00% / 0%) ) 3) 8 Code Measuring range/scale Code C Measuring range/scale Code C C /. A / 3.7 A ) / 0 A / 7. A ) / A / A ) / 300 A /. A / 37 A / 30 A ) / 0 A / A / 00 A / 0 A / 70 A / 7 A / 900 A / 90 A % / 0% 033 ) Movements 0-0 ma/ - 0 ma and with moving-coil connection are only avilable with scale 0-00%/ 0%. ) Version for direct connection or with CT connection n/ A possible. 3) Moving coil only for Ex-i or Ex-d flameproof applications Other interchangeable scales available on request...08 EATON

109 Ex-measuring instrument AM 7 for panel mounting Interchangeable scales Measuring instrument Example for order No. Measuring range Movement Order No. Measuring instrument AM 7, direct measurement Version with x cable gland M 0 /. A Moving iron GHG 88 R / 3.7 A Moving iron GHG 88 R / 7. A Moving iron GHG 88 R / A Moving iron GHG 88 R / A Moving iron GHG 88 R / ma 0-00% / 0% (Ri = 30 Ω) Moving coil GHG 88 R / ma 0-00% / 0% (Ri = 30 Ω) Moving coil GHG 88 R003 Measuring instrument AM 7, CT connection n/a Version with x cable gland M 0 /. A Moving iron GHG 88 R / 3.7 A Moving iron GHG 88 R / 7. A Moving iron GHG 88 R / A Moving iron GHG 88 R /. A Moving iron GHG 88 R / 30 A Moving iron GHG 88 R / A Moving iron GHG 88 R / 0 A Moving iron GHG 88 R / 7 A Moving iron GHG 88 R / 90 A Moving iron GHG 88 R /. A Moving iron GHG 88 R / 0 A Moving iron GHG 88 R / A Moving iron GHG 88 R / 300 A Moving iron GHG 88 R / 37 A Moving iron GHG 88 R / 0 A Moving iron GHG 88 R / 00 A Moving iron GHG 88 R / 70 A Moving iron GHG 88 R / 900 A Moving iron GHG 88 R % / 0% Moving iron GHG 88 R003 Dimension drawing Required cut-out Dimensions in mm EATON..09

110 Accessories for panel mounting Interchangeable scales Ordering details Scale Order unit Order No. AM Order No. AM7 Interchangeable scales for measuring instrument, CT connection n/a for AM /AM /. A 0 pieces GHG 0 9 R000 GHG 0 98 R / 3.7 A 0 pieces GHG 0 9 R000 GHG 0 98 R / 7. A 0 pieces GHG 0 9 R0003 GHG 0 98 R / A 0 pieces GHG 0 9 R000 GHG 0 98 R /. A 0 pieces GHG 0 9 R000 GHG 0 98 R / 30 A 0 pieces GHG 0 9 R000 GHG 0 98 R / 37. A 0 pieces GHG 0 9 R00 GHG 0 98 R / A 0 pieces GHG 0 9 R0007 GHG 0 98 R / 0 A 0 pieces GHG 0 9 R0008 GHG 0 98 R / 7 A 0 pieces GHG 0 9 R0009 GHG 0 98 R / 90 A 0 pieces GHG 0 9 R000 GHG 0 98 R /. A 0 pieces GHG 0 9 R00 GHG 0 98 R / 0 A 0 pieces GHG 0 9 R00 GHG 0 98 R / A 0 pieces GHG 0 9 R003 GHG 0 98 R / 300 A 0 pieces GHG 0 9 R00 GHG 0 98 R / 37 A 0 pieces GHG 0 9 R00 GHG 0 98 R / 0 A 0 pieces GHG 0 9 R00 GHG 0 98 R / 00 A 0 pieces GHG 0 9 R007 GHG 0 98 R / 70 A 0 pieces GHG 0 9 R008 GHG 0 98 R / 900 A 0 pieces GHG 0 9 R009 GHG 0 98 R % / 0% 0 pieces GHG 0 9 R000 GHG 0 98 R00 Special scales available on request...0 EATON

111 Accessories for panel mounting Labels Ordering code Labels for pushbutton Inscription Code Inscription Code 0, I, Start, Stop I 003 I I 00 D 00 STOP 00 START 007 emergency stop 008 LANGSAM 009 SCHNELL 00 EMERG.STOP 0 0 ARRET 0 MARCHE 0 AUF 0 AB 07 Neutral white 08 Neutral grün 09 0, I, Arret, Marche 00 UP 0 DOWN 0 ZU 0 ON 07 OFF Neutral rot 033 Neutral yellow 03 EIN 03 AUS 037 AUTO 039 HAND 00 SENKEN 0 HEBEN 0 LINKS 03 RECHTS 0 FAST 0 SLOW 0 RESET 07 OPEN 08 HALT 09 I I I 070 VOR 073 ZURÜCK 07 FIRE ALARM 09 FORWARD 09 REVERSE 09 RUN 00 HIGH 0 LOW 0 LP HQ LQ 7 STÖR. QUITT SPERREN 3 ENTSPERREN ENTRIEGELN VERRIEGELN EATON..

112 Accessories for panel mounting Flap with 0-activation Plastic flap Combination piece Labels Ordering code Content Operating element OU Order No. Padlocking facility with flap (blank) Mushroom-head pushbutton GHG 0 90 R0 with flap (red) Mushroom-head pushbutton GHG 0 90 R0 with bolt and chain (blank) Mushroom-head pushbutton GHG 0 90 R0 Fire alarm (red)) with hammer Mushroom-head pushbutton GHG 0 90 R08 Fire alarm (red) with hammer Mushroom-head pushbutton GHG 0 90 R0 with plastic flap Mushroom-head pushbutton activated GHG 0 99 R000 with plastic flap Mushroom-head pushbutton non-activated GHG 0 99 R000 with plastic flap Pushbutton activated GHG 0 99 R0003 with plastic flap Pushbutton non-activated GHG 0 99 R000 with plastic flap Emergency Stop GHG 0 99 R000 with flap (blank) GHG 0 90 R03 with flap (red) Pushbutton Pushbutton GHG 0 90 R033 with lap without 0 -activation (blank) Double pushbutton GHG 0 90 R03 with lap with 0 -activation (blank) Double pushbutton GHG 0 90 R0 with bracket ( set) Switch GHG 3/8 GHG 0 97 R000 ) released when window is broken select appropriate activation element. Type Content OU Order No. Protective collar Protective collar (yellow) for pushbutton and mushroom-head pushbutton GHG 0 90 R033 Protective collar (yellow) for pushbutton and mushroom-head pushbutton GHG 0 90 R03 Protective collar (yellow) for pushbutton and mushroom-head pushbutton 0 GHG 0 90 R03 Protective collar (red) for pushbutton and mushroom-head pushbutton GHG 0 90 R03 Protective collar (red) for pushbutton and mushroom-head pushbutton GHG 0 90 R037 Protective collar (red) for pushbutton and mushroom-head pushbutton 0 GHG 0 90 R038 Type Content OU Order No. Labels and tools for control switches Labels with label holder Blank (can be engraved) 0 GHG 0 93 R000 Combination piece for control station type incl. twist protection and sealing GHG 0 9 R000 Mounting and dismantling tool for lock nuts on operating elements Spanner GHG 0 9 R000 Blanking element for control units incl. seal and lock nut 0 GHG 0 90 R000 Protective cap for panel-mounted operating elements GHG R000 Please pay attention that only order units (OU) according to the ordering details can be delivered... EATON

113 EATON..3

114 .7 Ex-Control Switches with Plastic Enclosure With or without measuring instruments for Zone and The GHG 9 control switch series features an easy-to-install and easy-to-connect design. This control switch can be implemented with up to contacts and for to switch positions. Thus, practically all applications in modern control engineering can be covered. Contacts are protected against contact to VBG and have a terminal cross section of up to mm for the connection of single and multi-wire conductors. The rated current of the control switch at 00 V is A. The external contours of the enclosure facilitate access to the connection terminals and thus allow easy installation. Further installation advantages result from the snap-on/snapoff switch contact block and measuring instrument. A labyrinth seal in the cover guarantees the degree of protection IP. The impact-resistant, glass-fibre-reinforced polyester enclosure material is a prerequisite for withstanding even the most rugged industrial operating conditions. The switch can be padlocked using the inte grated locking facility. The locking position is indicated by a red pin. An interchangeable apparatus label and a neutral switch-position label are supplied with each switch. With CEAG installation system, control switches can be installed with high cost-efficiency. The control switches are also available on request with snapon metal or moulded-plastic flanges. Features Decisive cost saving with the CEAG mounting system Easily accessible connection terminals Degree of protection IP Cable connection range up to mm Integrated locking facility Optional forced contact on request.. EATON

115 Ex-control switch GHG 9 and GHG 93 GHG 93 GHG 9 Technical data Ex-control switch Typ 9 without and Typ 93 with measuring instrument with GHG 9 Switch with GHG 8 Switch Marking accd. to 0/3/EU D II G Ex ed ia IIC T/T D II D Ex td A IP T80 C D II G Ex ad ia IIC T/T D II D Ex td A IP T80 C EC-Type Examination Certificate PTB 99 ATEX 3 PTB 99 ATEX 3 IECEx Certificate of Conformity IECEx BKI IECEx BKI Marking accord. to IECEx Ex ed ia IIC T or T Ex td A IP T9 C Ex ed ia IIC T or T Ex td A IP T9 C Permissible ambient temperature 0 C up to +0 C C up to +7 C (T)... + C (T) Option Rated voltage max. 00 V max. 90 V Rated current A 0 A Rated current with gold contact points 0. A Overload range (Type 93 only) 0 fold - sec. fold - sec. 0 fold - sec. indicated :. Measuring range (type only 93) max. 0 - A direct / n / A Accuracy (type 93 only) Class. Movement (type 93 only) Moving iron Rated making-/rated breaking capacity AC-: U e 30 V / I e A accd. EN U e 00 V / I e A DC-3: U e V / I e A U e 30 V / I e 0.3 A Connecting terminals x mm or x mm Degree of protection accd. to EN 09 IP ) ) Cable glands/gland plates/enclosure drilling x M cable gland Dimensions (L x W x H) GHG 9 GHG 93 Weight GHG 9 GHG 93 Enclosure material Enclosure colour ) Brass flange for metal entries available on request 70 x 0 x 9 mm x 0 x 9 mm approx..0 kg ( level) approx.. kg ( level) approx..0 kg (3 level) approx..90 kg ( level) approx..0 kg ( level) approx..0 kg (3 level) glass-fibre reinforced polyester black AC-: U e 30 V / I e 8 A U e 00 V / I e A DC-3: U e V / I e A U e 30 V / I e 0. A ) Control switches with direct indicating measuring instruments in the standard version are delivered with looping terminals and PE terminal as well as M3 and M cable entries. EATON..

116 Ex-control switch GHG 9 and GHG 93 GHG 9 GHG 93 Ordering code for control switch (Code ) Code A - B - B - C - D - E - E - F Code A B B C D E E F ) Order No. GHG 9 Code Component Code A Control switch GHG 9 Control switch with measuring instrument GHG 93 Code Switching system Code B spring engaging spring engaging engaging engaging engaging engaging spring engaging engaging engaging engaging spring O O O O 90 O O O O O Code Contact code for silver contact points Contact silver contact points B /3 3 I II I I II I I I /3 I 0 II I II III I 0 II I I 07 7 I II /3 / I 0 7 /3 /7 I 0 II Other versions as well as gold contact points are available on request. Code Inscription (labels) Code Inscription (labels) Code C 0 I 00 0 I II 08 I II 00 AUS AUTO EIN 09 STOP START 003 AUS HAND AUTO 00 HAND AUTO 00 ÖRTLICH AUS FERN 0 SENKEN HEBEN 00 START NORMAL STOP 0 REMOTE LOCAL 00 OFF 0 ON 03 I 0 II 007 HAND OFF AUTO 0 AUS BETRIEB EIN IN START 0 AUS 0 EIN 009 MAN AUTO 0 AUF 0 AB 00 START STOP 07 Entriegelt 0 Verriegelt 0 HEBEN SENKEN 08 OUT OF HAND 0 OFF ON 09 LOCAL REMOTE AUTO 03 AUS EIN 030 STOP 0 START 0 HAND AUTO 03 HAND 0 AUTO 0 ON OFF 03 AUF AUS ZU 0 I II III 033 HAND AUS AUTO EATON

117 Ex-control switch GHG 9 and GHG 93 GHG 93 GHG 9 Ordering code for control switch (Code ) Code A - B - B - C - D - E - E - F Code Component Code D none 0 centre left right 3 Code Movement Code E Direct connection 0 CT connection /A 0 Connection 0-0/ ma (scale 0-00% / 0%) 0 Connection - 0/ ma (scale 0-00% / 0%) 0 Moving-coil connection 0-0/ ma (scale 0-00% / 0%) 07 Moving-coil connection - 0/ ma (scale 0-00% / 0%) 08 Code Measuring range/scale Code Measuring range/scale Code E /. A / 3.7 A ) / 0 A / 7. A ) / A / A ) / 300 A /. A / 37 A / 30 A ) / 0 A / A / 00 A / 0 A / 70 A / 7 A / 900 A / 90 A % / 0% 03 Code Built-in components Description F Entry type entry direct in enclosure GEH entry via plastic flange FLK entry via metal flange FLM F Entry element only threaded entry BO screw plug SV cable entry moulded plastic GK cable entry moulded metal) GM) cable entry with plug GV F3 Size M, M, M0, M, M3, M0 M Ø.. Ø, Ø F Number number of entries.. ) The code will represent only a selected part of configuration. ) Only available with metal flange EATON..7

118 Ex-control switch GHG 9 and GHG 93 GHG 9 GHG 93 Example for ordering code (Code ) Control switch with silver contact points, Switching system, Circuit 03, Labels HAND-0-AUTO, can be locked at 0, Measuring instrument AM7 for CT connection n/a, Scale 0-0/7 A, Cable gland x threaded entry M on bottom direct entry. Code A B B C D E E F F F3 F GHG 93 / / 03 / 0 / / / 0 / GEH / BO / M / Ordering details Switching system Circuit Code Labels Order No. Control switch Typ 9 with silver contact points Version with padlocking facility in 0 -, or position right (Code 3), cable gland x M bottom. 3 0 I I GHG R I 0 0 I GHG R I I GHG R I I GHG R I I GHG R I I GHG R I 0 II / /8 0 I 0 II GHG R I II III HAND OFF AUTO GHG 9 00 R000 Switching system Circuit Code Labels Order No. Control switch with measuring instrument type 93 with silver contact points. Version with padlocking facility in 0 -, or position left, measuring instrument AM 7 for CT connection n/a, Scale 0-00/0 %. x M3 bottom. 3 0 I I GHG R I 0 0 I GHG R EATON

119 Ex-control switch GHG 9 and GHG 93 GHG 93 GHG 9 Accessories Type Application Fixing method OU Order No. Mounting plate for type 9 Size wall mounting snap on GHG 0 93 R00 Size pipe clamp snap on GHG 0 93 R00 Size trellis-work mounting snap on GHG 0 93 R00 Size wall mounting snap on * GHG 0 93 R08 Size trellis-work mounting snap on * GHG 0 93 R08 Size pipe clamp snap on * GHG 0 93 R03 Type Application Fixing method OU Order No. Mounting plate for type 93 Size 3 wall mounting snap on GHG 0 93 R08 Size 3 pipe clamp snap on GHG 0 93 R00 Size 3 trellis-work mounting snap on GHG 0 93 R08 Size wall mounting snap on * GHG 0 93 R08 Size trellis-work mounting snap on * GHG 0 93 R08 Size pipe clamp snap on * GHG 0 93 R03 Plug-in fastener for CEAG modules with. mm and mm fixing elements pieces 0 GHG 0 93 R00 *snap-on with snap-on mounting. mm Dimension drawing X0 X97 X9 9 X 3- GHG 9 GHG 93 X = fixing dimensions Dimensions in mm EATON..9

120 .8 Ex-Light Alloy Control Switches Light alloy Version for Zone and CEAG explosion-protected control switch es are made of high-quality cast aluminiumsilicon (AlSi). A robust plastic powder coating according to RAL 703 protects the CEAG control switches against aggressive atmospheres and chemicals. Cover screws as well as all internal and external metal parts are made of stainless steel. These switches feature an easy-to-install and easy-toconnect design. The cam switch version allows implementation of many variants, covering almost all applications in modern control engineering. An optional locking facility allows to secure the switch against unauthorised or inadvertent actuation with a padlock. Features High mechanical, chemical and thermal resistance Impact-resistant plastic powder coating Snap-on switch holder..0 EATON

121 Ex-control switch GHG 9 and GHG 9 GHG 9 GHG 9 Technical data Ex-control switch Typ 9 without and Typ 9 with measuring instrument with GHG 9 switch with GHG 8 switch Marking accd. to 0/3/EU D II G Ex ed ia IIC T/T D II D Ex td A IP T80 C D II G Ex ed ia IIC T/T D II D Ex td A IP T80 C EC-Type Examination Certificate PTB 99 ATEX 3 PTB 99 ATEX 3 IECEx Certificate of Conformity IECEx BKI IECEx BKI Marking accord. to IECEx Ex ed ia IIC T or T Ex td A IP T9 C Ex ed ia IIC T or T Ex td A IP T9 C Permissible ambient temperature 0 C up to +0 C C up to +7 C (T)... + C (T) option Rated voltage max. 00 V max. 90 V Rated current A 0 A Rated current with gold contact points 0. A Overload range (type 93 only) 0 fold - sec. fold - sec. 0 fold - sec. indicated :. Measuring range (type 93 only) max. 0 - A direct / n / A Accuracy (type 93 only) Class. Circuit (type 93 only) Moving iron Rated making-/rated breaking capacity AC-: U e 30 V / I e A accd. EN U e 00 V / I e A DC-3: U e V / I e A U e 30 V / I e 0.3 A Connecting terminals x mm or x mm Degree of protection accd. to EN 09 IP ) ) Cable glands/gland plates/enclosure drilling x M cable gland, x threaded plug M Dimensions (L x W x H) GHG 9 GHG 9 Weight GHG 9 GHG 9 Enclosure material Enclosure colour grey RAL 703 ) Brass flange for metal entries available on request 70 x 30 x 9 mm 0 x 0 x 9 mm approx..90 kg ( level) approx..0 kg ( level) approx..90 kg ( level) approx. 3.0 kg ( level) high quality cast aluminium-silicon (AlSi) AC-: U e 30 V / I e 8 A U e 00 V / I e A DC-3: U e V / I e A U e 30 V / I e 0. A ) Control switches with direct indicating measuring instruments in the standard version are delivered with looping terminals and PE terminal as well as M3 and M cable entries. EATON..

122 Ex-control switch GHG 9 and GHG 9 GHG 9 GHG 9 Ordering code for control switch (Code ) Code A - B - B - C - D - E - E - F Code A B B C D E E F ) Order No. GHG 9 Code Component Code A Control switch GHG 9 Control switch with measuring instrument GHG 9 Code Switching system Code B spring engaging spring engaging engaging engaging engaging engaging spring engaging engaging engaging engaging spring O O O O 90 O O O O O Code Contact code for silver contact points Contact silver contact points B /3 3 I II I I II I I I /3 I 0 II I II III I 0 II I I 07 7 I II /3 / I 0 7 /3 /7 I 0 II Other versions as well as gold contact points are available on request. Code Inscription (labels) Code Inscription (labels) Code C 0 I 00 0 I II 08 I II 00 AUS AUTO EIN 09 STOP START 003 AUS HAND AUTO 00 HAND AUTO 00 ÖRTLICH AUS FERN 0 SENKEN HEBEN 00 START NORMAL STOP 0 REMOTE LOCAL 00 OFF 0 ON 03 I 0 II 007 HAND OFF AUTO 0 AUS BETRIEB EIN IN START 0 AUS 0 EIN 009 MAN AUTO 0 AUF 0 AB 00 START STOP 07 Entriegelt 0 Verriegelt 0 HEBEN SENKEN 08 OUT OF HAND 0 OFF ON 09 LOCAL REMOTE AUTO 03 AUS EIN 030 STOP 0 START 0 HAND AUTO 03 HAND 0 AUTO 0 ON OFF 03 AUF AUS ZU 0 I II III 033 HAND AUS AUTO EATON

123 Ex-control switch GHG 9 and GHG 9 GHG 9 GHG 9 Ordering code for control switch (Code ) Code A - B - B - C - D - E - E - F Code Component Code D none 0 centre left right 3 Code Movement Code E Direct connection 0 CT connection /A 0 Connection 0-0/ ma (scale 0-00% / 0%) 0 Connection - 0/ ma (scale 0-00% / 0%) 0 Moving-coil connection 0-0/ ma (scale 0-00% / 0%) 07 Moving-coil connection - 0/ ma (scale 0-00% / 0%) 08 Code Measuring range/scale Code Measuring range/scale Code E /. A / 3.7 A ) / 0 A / 7. A ) / A / A ) / 300 A /. A / 37 A / 30 A ) / 0 A / A / 00 A / 0 A / 70 A / 7 A / 900 A / 90 A % / 0% 03 Code Built-in components Description F Entry type entry direct in enclosure GEH entry via plastic flange FLK entry via metal flange FLM F Entry element only threaded entry BO screw plug SV cable entry moulded plastic GK cable entry moulded metal) GM) cable entry with plug GV F3 Size M, M, M0, M, M3, M0 M Ø.. Ø, Ø F Number number of entries.. ) The code will represent only a selected part of configuration. ) Only available with metal flange EATON..3

124 Ex-control switch GHG 9 and GHG 9 GHG 9 GHG 9 Example for ordering code (Code ) Control switch with silver contact points, Switching system, Circuit 03, Labels HAND-0-AUTO, can be locked 0, Measuring instrument AM7 for CT connection n/a, Scale 0-0/7 A, Cable entry x threaded entry M on bottom direct entry. Code A B B C D E E F F F3 F GHG 9 / / 03 / 0 / / / 0 / GEH / BO / M / Ordering details Switching system Circuit Code Labels Order No. Control switch type 9 with silver contact points Version with locking facility in 0 -, or position right (Code 3), cable gland x M bottom. 3 0 I I GHG R I 0 0 I GHG R I I GHG R I I GHG R I I GHG R I I GHG R I 0 II / /8 0 I 0 II GHG R000 Switching system Circuit Code Labels Order No. Control switch with measuring instrument type 9 with silver contact points. Version with padlocking facility in 0 -, or position left, measuring instrument AM 7 for CT connection n/a, Scale 0-00/0 %. x M3 bottom. 3 0 I I GHG R I 0 0 I GHG R000.. EATON

125 Ex-control switch GHG 9 and GHG 9 GHG 9 GHG 9 Dimension drawing Z Z 90 Z 0,3 GHG 9 GHG 9 Dimensions in mm 70 X 0 X0 30 Ø 7,8 90 Z 0,8 Ø, 0 X 0 X0 0 X = fixing dimensions EATON..

126 .9 Ex-Light Alloy Control Stations Ex-d pushbutton and control switches for Zone and Ex-d explosion-protected control stations made of light alloy metal are equipped with up to three components to switch and control processes in areas of Zone,, and at no risk of explosion. Built-in components, such as signal lamps, push buttons and switches are ready installed inside of the enclosures. To facilitate insertion of cables into the entries, Ex-d threads for 3/ Ex-d cable glands are available at the enclosures. A high IP degree of protection allows universal use in areas at risk of explosion. The light metal control stations have an outside earthing connection. Features High degree of protection IP7 High mechanical, chemical and thermal resistance Individual configuration.. EATON