WIRE MESH TRAY TRAY ACCESSORIES FITTINGS

Transcription

1 WIRE MESH TRAY TRAY ACCESSORIES FITTINGS 548 Nicola Place Port Coqutilam, BC V3B 0K4 Canada Direct Tel: Main Tel: Toll Free: Tel:

2 WIRE MESH TRAY STRAIGHT LENGTH Pg ACCESSORIES Pg PEAKED COVER FLAT COVER SUPPORT & BRACKETS DIVIDER DROP OUTS SPLICE BARS SPLICE KITS BOLTS WASHERS TRAPEZE HANGER Tel:

3 WIRE MESH TRAY Wire mesh tray is a wire mesh style cable tray system designed for sensitive cable applications in the data and communications industry. It utilizes high mechanical strength steel wire that is welded into a 2 x 4 grid system. This grid system supports and carries cables. By using wire mesh tray s welded mesh, sensitive cables and fiber optics receive additional support and are safe from any damage due to sharp edges. Model No: WT-GRSX 60 Model No: WT-GRSX 110 Special Order MODEL No: Height (H) Width (W) Load Diameter IEC Rating (at 1.5 m span) NEMA Rating (at 6.6 ft span) cm in mm in kg lbs mm in kg/m lb/ft WT-GRSX WT-GRSX WT-GRSX WT-GRSX WT-GRSX WT-GRSX WT-GRSX WT-GRSX WT-GRSX WT-GRSX WT-GRSX WT-GRSX SPECIAL ORDER No: Height (H) Width (W) Load Diameter IEC Rating (at 1.5 m span) NEMA Rating (at 6.6 ft span) cm in mm in kg lbs mm in kg/m lb/ft WT-GRSX WT-GRSX WT-GRSX WT-GRSX WT-GRSX WT-GRSX *All model number and special order numbers available in either steel (V) or (F) *(V) galvanized according to DIN , blued - powder coat finish available on request *(F) hot dip galvanized after fabrication (HDGAF) accodring to DIN EN ISO 1461 *Minimum order quantities required for WT-GRSX & WT-GRSX Tel:

4 WIRE MESH TRAY - BEND REQUIREMENTS When determining how much extra basket tray to quote for making 90 or 45 bends, remember that each basket tray piece has 30 sections. The number of sections required to make the bend is determined by the width of the tray. The following is a breakdown of some common requirements for 90 bends (cut in half for 45 bends). Width (W) Number of Sections Number of Splices mm in WT-GRHKM WT-GRHKM WT-GRHKM WT-GRHKM WT-GRHKM WT-GRHKM WT-GRHKM WT-GRHKM BOLT/WIRE MESH CUTTER Model No: WT-GTBS 500 V Tel:

5 WIRE MESH TRAY - ACCESSORIES Legend Material Description V Galvanized according to DIN , blued (powder coat finish available on request) S Pre-galvanized according to DIN EN Steel F Hot dip galvanized after fabrication (HDGAF) according to DIN EN ISO 1461 FG Geomet galvanized E3 Stainless Steel , (AISI 304) Stainless Steel E (AISI 316) UNIVERSAL SPLICE KIT Model No: WT-GRHKM 6x15 V F E3 E5 J-HOOK BOLT Model No: WT-GRSM 6 V E3 MUSHROOM HEAD BOLT/WASHER Model No: WT-FLM 6x20 V F E5 DIVIDER MOUNTING CLAMP Model No: WT-GRVC Tel:

6 WIRE MESH TRAY - ACCESSORIES UNIVERSAL WIRE MESH MOUNTING BRACKET Model No: WT-GRBP 6 UNIVERSAL MOUNTING BRACKET Model No: WT-GRWGK 10 S E3 SPLICE & COUNTERSPLICE WASHER Model No: WT-GTL 20 or WT-GTL 30 V FG E3 E5 LARGE CLAMPING BRACKET Model No: WT-GTL 40 V FG E3 E5 CENTER HANGER Model No: WT-GRKB 10 E5 CENTER HANGING BRACKET Model No: WT-GRMB 50 S E5 Tel:

7 WIRE MESH TRAY - ACCESSORIES TRAPEZE HANGER Model No: WT-GTAB 85 S FG E5 CABLE DROP OUT Model No: WT-GTKA 50 S FG E3 LARGE CABLE DROP OUT Model No: WT-DROPOUT??? TRAPEZE SUPPORT Model No: WT-GTTW S FG E R7.154 COVER FOR WIRE MESH TRAY Model No: WT-GRD PEAKED COVER FOR WIRE MESH TRAY Model No: WT-GRD / Tel:

8 WIRE MESH TRAY - ACCESSORIES WALL BRACKET Model No: WT-GTTKS S FG E5 DIVIDER Model No: WT-RW 50, WT-RW 85, or WT-RW110 HORIZONTAL STRAIGHT SPLICE BAR Model No: WT-GTVL 300 V F E3 E5 BOLTLESS SPLICE BAR Model No: WT-GRVSX 5 or WT-GRVSX 4 S E3 E5 ADJUSTABLE VERTICAL SPLICE PLATE Model No: WT-GRGV 50 HORIZONTAL 90 SPLICE BAR Model No: WT-GRWV 20/250 V F E3 E5 Tel: