TABLE OF CONTENTS. Impregnated... 1 NORDIC FENCE Fynbo FSC Certified... 1

Transcription

1

2 TABLE OF CONTENTS Impregnated... NORDIC FENCE Fynbo FSC Certified... Iron... NORDIC FENCE Lightweight model, GENERAL... NORDIC FENCE Lightweight model, with a grid filled... NORDIC FENCE Lightweight model, with net filled... NORDIC FENCE Heavy model... Patura handling system - panel... Patura handling system - panel with gate Accessories... 5 NORDIC FENCE Closing with spring, for iron doors powerful model... 5 NORDIC FENCE Closing with the chain of iron doors... 5 NORDIC FENCE Spring lock, wood door... 6 NORDIC FENCE Attack, the iron doors... 6 NORDIC FENCE Top hinges double, to wood door... 7 NORDIC FENCE Lock for wood door... 7 NORDIC FENCE Brackets for spring lock, to round posts... 8 NORDIC FENCE Brackets for spring lock, to square posts... 8 NORDIC FENCE Bottom hinges, to wood door... 9 NORDIC FENCE Door lock 8, wood door... 9 NORDIC FENCE Amphibian hat down to casting, for wood door... 9 NORDIC FENCE Stabel with French threaded UNIVERSALE... 0 NORDIC FENCE Stabel set, UNIVERSALE... 0 NORDIC FENCE Angle latch for lightweight gate, galvanised... Page of

3 IMPREGNATED NORDIC FENCE "Fynbo" FSC Certified Beautiful and robust, danish wooden door of pressure impregnated pine. In order to minimize competition and increase the strength of the window, is the vertical posts and the top done in glue wood. All doors are manufactured with holes up "to nuts, in order to avoid damage to people and animals. All bolts are stainless A2 quality. Accessories: In particular, assaults on 2-door (art. no ), spring lock (art. no ), appropriation (03-9 / -89) top hinges for wood posts (art. no / -94), the bottom hinges for wood posts ( art. no ), and Stacker (art. no. 037) cm 20 cm cm 80 cm cm 240 cm cm 300 cm cm 360 cm Page of 2

4 IRON NORDIC FENCE Lightweight model, GENERAL Frame: Made of 34 mm iron pipes, with drilled holes that allow the zinc to penetrate inside the box under the electroplating. Bar: Vertical 25 x 3 mm flat iron twisted and welded on the frame, with holes for the through-5 pcs Ø6 mm round iron. Tapering brace in Ø8 mm, is welded to the frame. Hinge: Made of one piece of heavy 50 x 6 mm flat iron. Can be adjusted up and down as you wish. Surface: hot galvanized finish, as 00% security against rust attacks. Accessories: Comes PLUS. Stacker (art. no. 03-7) and closing (art. no. 03-8) cm 50 cm cm 242 cm cm 302 cm cm 362 cm cm 422 cm NORDIC FENCE Lightweight model, with a grid filled Frame: Made of 34 mm iron pipes, with drilled holes that allow the zinc to penetrate inside the box under the electroplating. Bar: Vertical and horizontal Ø5, 5 mm round iron is the grid, with a mesh size of 75 x 75 mm. All the welds are done BEFORE electroplating. Hinge: Made of one piece of heavy 50 x 6 mm fladjern, Can be adjusted up and down as you wish. Surface: hot galvanized finish, as 00% security against rust attacks. Accessories: Comes PLUS. Stacker (art. no. 03-7) and closing (art. no. 03-8) cm 00 cm cm 50 cm cm 242 cm Page 2 of 2

5 IRON cm 302 cm cm 362 cm cm 20 cm cm 300 cm cm 200 cm cm 20 cm cm 300 cm NORDIC FENCE Lightweight model, with net filled Frame: Made of 34 mm iron pipes, with drilled holes that allow the zinc to penetrate inside the box under the electroplating. Bar: Vertical through 20 mm iron pipes welded on the frame, with horizontal 20 mm iron pipes welded in between. Net: Steel Merge in twine Ø2, 5 mm in size 55 x 55 mm, tightened up and tied to the frame with double bonds in a Ø2, 0 mm soft iron wire. Hinge: Made of one piece of heavy 50 x 6 mm flat iron. Surface: hot galvanized finish, as 00% security against rust attacks. Accessories: Comes PLUS. Stacker (art. no. 03-7) and closing (art. no. 03-8) cm 302 cm NORDIC FENCE Heavy model Frame: Produced by 2 pcs Ø48 mm iron pipes, welded on the vertical square tubes. Bar: 5 pcs Ø34 mm iron pipes welded on the frame. Hinge: adjustable eye bolts, curious to the nuts. Surface: hot galvanized finish, as 00% security against rust attacks. Accessories: Comes PLUS. Stacker (art. no. 03-7) and closing (art. no / -26) cm 53 cm Page 3 of 2

6 IRON cm 304 cm cm 365 cm Patura handling system - panel Patura Panel for handling cattle and large horses. The handling panel is made of hot dip galvanized flat tubes 50 x 30 x.5 mm for the highest level of stability. Two of the tubes are turned, which improves the stability further. The panel measures 300 cm in width and 70 cm in height. The panels are connected with chains and stainless screws cm 300 cm Patura handling system - panel with gate Patura Panel with gate for handling cattle and large horses. The panel is made of hot dip galvanised flat tubes 50 x 30 x.5 mm for the highest level of stability. Two of the tubes are turned, which improves the stability further. The handling panel with gate measures 300 cm in width and 220 cm in height. The gate is locked with a spring lock. The panels are connected with chains and stainless screws cm 300 cm Page 4 of 2

7 ACCESSORIES NORDIC FENCE Closing with spring, for iron doors powerful model Spring loaded lock with the nut. Can be used in connection with the assembly of heavy iron doors NORDIC FENCE Closing with the chain of iron doors Complete sets included. chain and seizures. Can be used in all types of iron doors Page 5 of 2

8 ACCESSORIES NORDIC FENCE Spring lock, wood door Spring steel grip of attaching the door frame. Comes excl. attacks, for installation on a door column. For wood doors with Hard wood's uprights in 4 x 4 and 6 x 6 cm. Can be used for side and inside doors. Internal dimensions of U-hinge is approx. 7.5 cm NORDIC FENCE Attack, the iron doors 2 sizes. Comes inc. bolt for installation on the cover. screwed on the door frame at the top of the one wicket, by closing of 2 doors against each other ,5 cm ,3 cm Page 6 of 2

9 ACCESSORIES NORDIC FENCE Top hinges double, to wood door The doors of 20 cm used small hinges. The doors of 240 cm or more used large hinges. Comes inc. nails and screws. For all NSHs wood doors, or for mounting on other door frames in max. 7 cm in thickness cm cm NORDIC FENCE Lock for wood door screwed on the door frame in max. 8 cm thick. Screwed on the top of the door frame of the one wicket, by the closing of the double doors Page 7 of 2

10 ACCESSORIES NORDIC FENCE Brackets for spring lock, to round posts For installation on round posts NORDIC FENCE Brackets for spring lock, to square posts Hot galvanized. : 50 mm. for installation on square posts NORDIC FENCE Bottom hinges, to wood door For all NSHs wood doors, or for mounting on other door frames in max. 7 cm in thickness. Comes inc. nails and screws. for mounting on the door frame. Page 8 of 2

11 ACCESSORIES cm NORDIC FENCE Door lock 8 ", wood door screwed on the door frame bottom NORDIC FENCE Amphibian hat down to casting, for wood door galvanized. Size: Ø4/45 x L250 mm. Wells size: Ø2 mm. In connection with the installation of wooden doors, build up ass double doors Page 9 of 2

12 ACCESSORIES NORDIC FENCE Stabel with French threaded UNIVERSALE Length: 50 mm. Use. For all types of doors, mounted on wood poles NORDIC FENCE Stabel set, UNIVERSALE Set of 2 stack inc. nuts and washers. Hot galvanized. M20 x 275 mm. One stack is equipped with extra long tap and hole, for the security gate. For all types of doors, mounted on wood poles NORDIC FENCE Angle latch for lightweight gate, galvanised Use: As latch for lightweight gate, when attaching to wooden post or wall. Length: 30 cm Page 0 of 2

13 ACCESSORIES Page of 2

14

15

16 ACCESSORIES Page 2 of 2