Roof-Top Applications
|
|
- Hector Patrick
- 6 years ago
- Views:
Transcription
1 Roof-Top Non-Penetrating Flat Roof Mounts Pre galvanized mast, base and Rubber Mat Designed for DSS support FRM Non-Penetrating Roof Mount (1.25" O.D. Tubing, 60" Overall Mast Height) FRM Non-Penetrating Roof Mount (1.50" O.D. Tubing, 30" Overall Mast Height) FRM Non-Penetrating Roof Mount (1.66" O.D. Tubing, 30" Overall Mast Height) FRM Non-Penetrating Roof Mount (2.375" O.D. Tubing, 30" Overall Mast Height) FRM Non-Penetrating Roof Mount (2.375" O.D. Tubing, 60" Overall Mast Height)
2 Roof-Top Non-Penetrating Flat Roof Mounts - Heavy Duty Hot dip galvanized mast, base and Rubber Mat Designed for large dish/antenna support 60" Square Footprint JRM Non-Penetrating Roof Mount (2.375 OD Tubing, 5' Overall Mast Height) JRM Non-Penetrating Roof Mount (2.875 OD Tubing, 5' Overall Mast Height) JRM Non-Penetrating Roof Mount (2.375 OD Tubing, 10' Overall Mast Height) JRM Non-Penetrating Roof Mount (2.875 OD Tubing, 10' Overall Mast Height) 78" Square Footprint BRM Non-Penetrating Roof Mount, 2-3/8" OD x 120" Pipe Mount BRM Non-Penetrating Roof Mount, 3-1/2" OD x 120" Pipe Mount BRM Non-Penetrating Roof Mount, 4-1/2" OD x 120" Pipe Mount
3 Roof-Top Non-Penetrating Flat Roof Mount for 25N Hot dip galvanized mast, base and Rubber Mat Designed for 15N/20N/25N support Non Penetrating Roof Top for 25N Non-Penetrating Roof Frames Hot dip galv. frame, pipes and Rubber mats and pipe mounts Single sector roof mount Non-Penetrating Roof Frame, 10'-6" Wide Non-Penetrating Roof Frame, 10'-6". 2-3/8" OD pipe not included Non-Penetrating Roof Frame, 10'-6". Three 2-3/8" OD x 84" pipe mounts included Non-Penetrating Roof Frame, 10'-6". Three 2-3/8" OD x 108" pipe mounts included Non-Penetrating Roof Frame, 10'-6". Four 2-3/8" OD x 84" pipe mounts included Non-Penetrating Roof Frame, 10'-6". Four 2-3/8" OD x 108" pipe mounts included. Non-Penetrating Roof Frame, 12' Wide Non-Penetrating Roof Frame, 12'-6". 2-3/8" OD pipe not included Non-Penetrating Roof Frame, 12'-6". Three 2-3/8" OD x 84" pipe mounts included Non-Penetrating Roof Frame, 12'-6". Three 2-3/8" OD x 108" pipe mounts included Non-Penetrating Roof Frame, 12'-6". Four 2-3/8" OD x 84" pipe mounts included Non-Penetrating Roof Frame, 12'-6". Four 2-3/8" OD x 108" pipe mounts included. Non-Penetrating Roof Frame, 15' Wide Non-Penetrating Roof Frame, 15'. 2-3/8" OD pipe not included Non-Penetrating Roof Frame, 15'. Three 2-3/8" OD x 84" pipe mounts included Non-Penetrating Roof Frame, 15'. Three 2-3/8" OD x 108" pipe mounts included Non-Penetrating Roof Frame, 15'. Four 2-3/8" OD x 84" pipe mounts included Non-Penetrating Roof Frame, 15'. Four 2-3/8" OD x 108" pipe mounts included
4 Roof-Top Wall Mount Brackets Pre-galv. Clamps and incl. lag bolts Mast pipes up to 1-3/4" OD Knee brace included on 12" and larger Double Wall Mount Kit, 4" Wide, Fits 1" O.D. to 2" O.D. Mast Double Wall Mount Kit, 8" - Standard, Fits 1.25" O.D. to 1.75" O.D. Mast Double Wall Mount Kit, 12" - Standard, Fits 1.25" O.D. to 1.75" O.D. Mast Double Wall Mount Kit, 18" - Standard, Fits 1.25" O.D. to 1.75" O.D. Mast Double Wall Mount Kit, 24" - Standard, Fits 1.25" O.D. to 1.75" O.D. Mast
5 Roof-Top Wall Mount Brackets, Heavy Duty Pre-galv. Clamps and incl. lag bolts Mast pipes from 2" to 4" OD Knee brace included on 12" and larger Double Wall Mount Kit, 12" Wide, Fits 2" O.D. to 4" O.D. Mast Double Wall Mount Kit, 18" Wide, Fits 2" O.D. to 4" O.D. Mast Double Wall Mount Kit, 24" Wide, Fits 2" O.D. to 4" O.D. Mast Single Wall Mount Kit, 30" Wide, Fits 2" O.D. to 4" O.D. Mast Universal Wall Mount Hot dip galvanized w all mount and for hollow w all. Wall anchors for solid w alls Welded dual support arm w ith 2-3/8" OD mast pipe. Mounts to: Hollow or solid w all Wall Mount Assembly, Hollow Walls (2-3/8" OD x 0.154" WT x 63" Long) Wall Mount Assembly, Solid Walls (2-3/8" OD x 0.154" WT x 63" Long) Wall Mount Assembly, Hollow Walls (2-3/8" OD x 0.154" WT x 72" Long) Wall Mount Assembly, Solid Walls (2-3/8" OD x 0.154" WT x 72" Long)
6 Roof-Top Gable/Eave Mount Hot dip galvanized brackets and for hollow w alls. Pipe mast and solid w all anchors Welded brackets w ith mast size up to 3-1/2" OD. Mounts to: Hollow or solid w all Wall Mount Brackets for Hollow Walls. 1-1/2" to 3-1/2" OD. Kit of 2. Wall Mount Brackets for Solid Walls. 1-1/2" to 3-1/2" OD. Kit of Pole Wall Mount Tw o hot dip galvanized brackets and Wall anchors for solid w alls Welded dual level brackets. 4 bolt pattern. Mounts to: Hollow or solid w all Heavy Duty Wall Mount Brackets for Hollow Walls. 1-1/2" to 4-1/2" OD. Kit of 2. Heavy Duty Wall Mount Brackets for Solid Walls. 1-1/2" to 4-1/2" OD. Kit of
7 Roof-Top Wall Mounts Hot dip galv angles, clamps and Mast pipe and w all attachment Variable mast pipe location. 2-7/8" to 5" OD Pole Wall Mount Assembly 83.3 Double Wall Mount Kits, Wide Pow der coated mast pipe, base plate and Wall anchor Universal design w ith 1.66" OD mast pipe Universal Wall Mount, 1.66" OD Mast Pipe 3.0 Double Wall Mount Kits, Standard Galvanized steel support braces and connecting. Wall anchors and 1-1/4" mast tubing. Adjustable design w ith tw o support locations Mounts to: Gable/Eave location Adjustable Gable/Eave Mount (Adjusts 40"- 60")
8 Roof-Top Roof-Top Coax Bridge Kits Galv steel channel, 3 sleepers and 4, 8, 12 run version. Solid cover w ith PVC sleepers Mounts to: Nonpenetrating design Line Coax Bridge Kit Line Coax Bridge Kit Line Coax Bridge Kit Coax Bridge Splice Kits,Straight Galv steel channel and 4, 8, 12 run version. Mounts to: Roof-top bridge kit Line Coax Bridge Splice Kit, Straight Line Coax Bridge Splice Kit, Straight Line Coax Bridge Splice Kit, Straight
9 Roof-Top Coax Bridge Splice Kits, 0-45 degrees Galv steel splice and 4, 8, 12 run version. Mounts to: Roof-top bridge kit Line Coax Bridge Splice Kit, 0-45 degrees Line Coax Bridge Splice Kit, 0-45 degrees Line Coax Bridge Splice Kit, 0-45 degrees Coax Bridge Splice Kits, 0-90 degrees Galv steel channel and splices. Sleeper and 4, 8, 12 run version. Mounts to: Roof-top bridge kits Line Coax Bridge Splice Kit, 0-90 degrees Line Coax Bridge Splice Kit, 0-90 degrees Line Coax Bridge Splice Kit, 0-90 degrees
10 Roof-Top Coax Bridge Splice Kits, T-Splice Galv steel channel and splices. Sleeper and 4, 8, 12 run version. Mounts to: Roof-top bridge kits Line Coax Bridge Splice Kit, T-Splice Line Coax Bridge Splice Kit, T-Splice Line Coax Bridge Splice Kit, T-Splice PVC Sleepers PVC sleeper 4, 8, 12 run version. Mounts to: Roof-top bridge kits Hole PVC Sleeper Hole PVC Sleeper Line PVC Sleeper 3.4 Rubber Mats Rubber mat Helps to protect roof surface Mounts to: Roof-top bridge kits and Non-pens Rubber Mat, 1/8" x 36" x 42" Rubber Mat, 1/4" x 4" x 10' Rubber Mat, 1/2" x 18" x 48"
11 Roof-Top Penetrating Tripod Mounts Pre galvanized tube legs, corrosion resistint clamps and Mast pipe Various sizes, fully assembled Penetrating Tripod Mount, 36" Penetrating Tripod Mount, 60" Penetrating Tripod Mount - 120" Penetrating Tripod Mount - 120", Fits up to 2-1/4" Tubing 30.0 Heavy Duty Penetrating Tripod Mount Pre galvanized tube legs, corrosion resistint clamps and Fully assembled Penetrating Tri-Mast Mount, 60"
12 Roof-Top Penetrating Trimast Mounts Galvanized steel support angles, support mast and. Heavy duty design for larger antenna applications. 2" mounting pipe. Roof anchors Penetrating Tripod Mount, 60" - Heavy Duty 42.0 Tri-Sector Mount Rubber pads, screw s and glue Moisture/cushi on barrier betw een mount and mounting surface Roof Pad kits
13 Roof-Top Pitch Pad Kit Hot dip galvanized angle and mast pipes and anchor Supports 1-1/4" to 4-1/2" OD mast pipes. Mounts to: Flat or peaked roofs to 45 degrees Saw -Horse Penetrating Roofmount Assembly Square Chimney Mount Hot dip frame members and pipe mounts and roof beams 13'-6" w ide face, 10' and 15' tall. Mounts to: Roof s or platforms Tri-Sector Assembly, 10' Tall Tri-Sector Assembly, 15' Tall
14 Roof-Top Round Chimney Mount Hot dip galvanized pipe corners, threaded rod and. Cross arms and pipe mounts Chimney Mount Assembly, square. 12" - 48" face. Chimney Mount Assembly, square. 48" - 91" Chimney. Four 4-1/2" OD x 48" corner mounting pipes Mounts to: Square or rectangular sections from 12" to 91" Wall Anchor Hot dip galvanized pipe sectors, threaded rod and. Cross arms and pipe mounts Three 4-1/2" OD x 48" 120 degree sector mounting pipes Mounts to: Diameters from 8' to 11'- 6" Chimney Mount Assembly, round. 8' ' diameter
15 Roof-Top Light Duty Chimney Mount Pre-galvanized material and. Lightw eight design w ith tw o mast supports 1-1/4" mast tubing Mounts to: Various Chimney sizes up a 12' circumference /perimeter Z-Type Chimney Mount for up to 1-1/2" Dia. Tubing 1.0 Penetrating Saw Horse Mount 5/8" THD eye-bolt, nuts and w all plates. Threaded eyebolt design allow s allow s for adjustable w all/roof thicknesses Threaded Wall Anchor (5/8" x 18" Wall Anchor)
Transmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
More information1LG WALL MOUNTS - 1LG
WM WALL MOUNTS - 1LG 1LG The Universal One-Legged Mount (1LG) may be the one and only mount that can be installed on any part of any building. This mount is designed for many types of antennas home, TV,
More information50' - 100' Self Supporting Towers
The ROHN RSL tower reaches above line-of-site obstacles such as tree tops, hilly terrain and buildings. If your site is remote or rugged, ROHN tower manufacturer ships the lightweight tower to you knocked-down
More informationHex Head Bolt Set N - Includes lock nut. Used to connect male and female T connectors. Galvanized. 3/4" x 3-1/2". Standard Grade (f) Part #24279
a Standard Grade (3/16 ) and Commercial Grade(1/4 ) Tie Down Is designed for use with 1-1/2" thick lumber (minimum width 6"). All hardware is mounted with 3/8" carriage bolts. All male and female dock
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationPRODUCT CATALOG Meadowview Rd Junction City, OR fax
Made in the USA, since 1972 PRODUCT CATALOG Nichols Manufacturing 292 Meadowview Rd Junction City, OR 97448 541-485-60 sales@nicholsmanufacturing.com www.nicholsmanufacturing.com 122616 Nichols Manufacturing
More informationUltra Space Saver American Bicycle Security Company
The Ultra Space Saver is userfriendly and allows easy access to bikes. It provides convenient space for u-lock security on nearly any bike, including bikes with fenders and fork shocks. The double-sided
More informationBuilding + Mounting Learn about Rooftop Mounts
Building + Mounting Learn about Rooftop Mounts A Build-It-Ourselves Guide to Wireless Mesh Networks 1 Introduction For the best network connections to your neighbors, the best place to put a wireless router
More informationMast and Antennas for Field Day & Emergencies
Mast and Antennas for Field Day & Emergencies John A. Allocca, WB2LUA, July 2005 This is a 27 feet 1.5 diameter portable guyed mast with a 28 feet diameter footprint. It breaks down into four 6 feet sections
More informationOne-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. Two-sided rack, hot-dip galvanized
Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted to form a serial system, with boreholes for anchoring or plugging. Bicycle parking rack Frame of angular
More informationMidwest Roadside Safety Facility
19'-11 1/2" 6083 239'-11 1/2" 73139 Impact 1100C 25 43 5/16" 1100 upstream from the upstream face of the first shear fender downstream of the joint between barrier nos. 7 and 8 Upstream End Downstream
More informationNON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
More informationMax. Rec. Load. Wt. Per Inch lbs. kn lbs. kn lbs. kg. Wt. Per Inch lbs. kn lbs. kn lbs. kg 750 F (399 C)
FIG. 10 FIG. 15 & 15L Function: Designed for use in pipe hanger assemblies. (Type 304 or 316 Stainless Steel upon request) Ordering: Specify figure number, rod size, length (), material, and finish. 650
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationDowntown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
More informationSwerve Rack CUSTOM RACKS AVAILABLE
CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationTABLE OF CONTENTS. Impregnated... 1 NORDIC FENCE Fynbo FSC Certified... 1
TABLE OF CONTENTS Impregnated... NORDIC FENCE Fynbo FSC Certified... Iron... NORDIC FENCE Lightweight model, GENERAL... NORDIC FENCE Lightweight model, with a grid filled... NORDIC FENCE Lightweight model,
More informationset of safety brace steel cable draw-up gate kpl
0324101 7108020 8208100 Order-nr. Description Number 0324101 safety brace steel cable draw-up gate 2 7108020 hexagon-head tap bolt M8x20 galv. 2 8208100 hexagon nut M8 galv. 2 set of safety brace steel
More informationSIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
More informationMATERIALS LIST - DARQUEST INDUSTRIES, CORP.
MATERIALS LIST - DARQUEST INDUSTRIES, CORP. Order these items direct from Darquest QTY ITEM # DESCRIPTION PRICE ea. EXTENSION NAILS 0015 20d (3 3/4") ARDOX DECK NAILS -per lb. 0010 10d (2 7/8") ARDOX DECK
More informationMDOTProjectwise\Documents\Reference Documents\Traffic Reference\Statewide Special Details\Develop
500 460 MDOTProjectwise\Documents\Reference Documents\Traffic Reference\Statewide Special Details\Develop Check if Applicable TRAFFIC SIGNAL SPECIAL DETAILS INDEX/CHECKLIST *One completed checklist required
More informationSIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
More informationConcealed Thru-Roof Assemblies
Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for
More informationPole Line Hardware. Heavy-Duty Spool Rack (200 A) No. of Wires. Anti-Vibration Kit for Spool Rack. Heavy-Duty Spool Rack (400 A) No.
Heavy-Duty Spool Rack (200 A) SS401E - SS802E - SS803E - SS804E No. of Wires Overall Length SS401E 1 9-1/2 300 136.3 10 SS802E 2 17-1/2 520 236.3 SS803E 3 25-1/2 780 354.5 5 SS804E 4 33-1/2 1040 472.7
More informationRIDGE MAST MOUNT (RMM)
May 5, 009 Revision E ASSEMBLY MANUAL (RMM) General Dynamics Satcom Technologies 1500 PRODELIN DRIVE NEWTON NC 8658 88-464-4141 www.gdsatcom.com 1.0 INTRODUCTION: 1.1 Features: The Ridge Mast Mount (RMM)
More informationBollards, Column Guards, Corner Guards, Wheel Stops, Speed Humps & Fixings. Lockinex. ea i, ea u i
Bollards, Column Guards, Corner Guards, Wheel Stops, Speed Humps & Fixings Lockinex ea i, ea u i INTRODUCTION Protecting Building Curtilage, Assets & Personnel the Lockinex range of Bollards & Guards are
More informationCoro Character PVC Frame Instructions:
Coro Character PVC Frame Instructions: In this tutorial we will show you how to make a basic light weight frame for your Coro character. Then we will show you how to add on to your frame to help you either
More informationInstallation Instructions Hustler 6-BTV Trap Vertical
Installation Instructions Hustler 6-BTV Trap Vertical ASSEMBLY 1. Check the package contents against the parts list on page 2. 2. WARNING. Installation of this product near power lines is dangerous. For
More informationFlooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
More informationBuild Your Own Feeders Double-sided or Single-sided using Premier s panels!
Build Your Own Feeders Double-sided or Single-sided using Premier s panels! 800-282-6631 premier1supplies.com Premier s Double-Sided Feeder For large sheep and rams Material List 1. From Premier a. Four
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationSIGN MOUNTED BEACON SIG-027-A SINGLE SIGN MOUNTED FLASHING BEACON INSTALLED ON ONE WOOD POST DETAIL "A-1"
1 1/2" x 60" Galvanized (thread both ends) Top Bolt See Detail "A-1" and Slotted Channel Parallel Conduit Clamp Warning Sign 3 Equal Bolt Spacings (3 places at 12" min. spacing) (1) 3/8"x 7" min. (4"x
More informationASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL SIDEWALL WINDOW LATCHES Wall Panel Batten Strip Top Cap For Wall Base Beam For
ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL SIDEWALL WINDOW LATCHES Wall Panel Batten Strip Top Cap For Wall Base Beam For Wall Size: 60.8 1543mm Size: 60 1520mm 4 Panel Wall
More informationH O O P RAC K. Simple Security
H O O P RAC K Simple Security The Hoop Rack is a proven design that provides high security and easy bike parking. The Hoop Rack uses thick pipe construction and the full radius of the bend makes the Hoop
More informationA - Railing Frame Material Specifications
A - Railing Frame Material Specifications NOTE: We strongly recommend stainless steel for exterior applications. R-1 8/1/02 B Stainless Steel Spacers (For Horizontal Railing Double Post End Post using
More informationBOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
More informationBrackets and Tenons. Product Specifications. PB Series XA-TMDA8
Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation
More informationIIHS Side Impact Outrigger
IIHS Side Impact Outrigger Assembly Procedure Base Assembly (14.3 lbs) The base assembly consists of a ¼ thick steel plate, a ¼ thick piece of polyethylene, and mounting fixtures for the upper and lower
More informationOffering a full range of anchoring and tie down systems including:
Offering a full range of anchoring and tie down systems including: BE SURE TO CONSULT LOCAL REGULATORS FOR CODE QUESTIONS AND THE MANUFACTURERS INSTALLATION MANUAL FOR PROPER MATERIALS. Anchors Pan Systems
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wire Mesh Cable Tray System for Channeling of Cable Wiring A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Wall Mount Ceiling Mount s
More informationLok Fast Column Clamp General Information
Lok Fast Column Clamp General Information Gates Lok-Fast Column Clamp Has These Advantages: Can Be Job Built Gang Formed No Loose Pieces Designed For Rapid Placement of Concrete Rapid Locking Action 3
More informationPOLE LINE HARDWARE POLE LINE HARDWARE. HI-LINE UTILITY SUPPLY CO. Phone: Fax:
146 MACHINE BOLTS w/ square nut Rolled threads; s six inches or longer have con-type points. Hot dip galvanized. 860412 3/8" 4.5" 3" 250 8706 6" 3" 100 8707 7" 3" 100 8708 1/2" 8" 4" 100 8710 10" 4" 50
More informationBUY A COMPLETE MOLD CLAMP ASSEMBLY OR INDIVIDUAL PARTS
Machined Mold s FEATURES: Our complete line of mold clamps are available in an extensive range of sizes. s are available in open-toe and closed-toe styles, as well as heavy duty and extra heavy duty versions.
More informationBol FEATURES: SPECIFICATIONS: 8' 24' Round Tapered and Straight Wood Poles STRUCTURA INC. FIXTURE TYPE: PROJECT NAME:
Bol 8' 24' Round Tapered and Straight Wood Poles FIXTURE TYPE: PROJECT NAME: Round Taper Glulam solid wood and aluminum pole available in 8' 24' lengths. Tenon adapters, slip fitters and side bracket mounts
More informationCHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)
CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960
More informationPortable Antenna Systems
Portable Antenna Systems Dr. John A. Allocca, WB2LUA www.wb2lua.com 3/6/16 System 1 - HF / VHF / UHF Tripod VHF/UHF Antenna Dipole Mount HF Hamstick Case! 1 of! 5 Introduction This antenna configuration
More informationHorse Shelter 12 x
Horse Shelter 12 x 15 76110678 Hardware Kit 76900228 THANK YOU FOR PURCHASING THIS PRODUCT Behlen Country has been in the business of providing quality products for more than 75 years. Our products will
More informationInstallation Instructions Hustler 6-BTV Trap Vertical
Installation Instructions Hustler 6-BTV Trap Vertical ASSEMBLY 1. Check the package contents against the parts list on page 2. 2. WARNING. Installation of this product near power lines is dangerous. For
More informationSTRUCTURAL BRACKETS CATALOGUE
0/2 STRUCTURAL BRACKETS CATALOGUE SUPERIOR QUALITY, HOT DIP GALVANISED, HEAVY DUTY BRACKETS FOR FIXING TIMBER TO TIMBER, TIMBER TO CONCRETE, TIMBER TO STEEL The BOWMAC product range is designed to cut
More informationWALL TO FABRICATED FLOOR
WALL TO FABRICATED FLOOR PERIMETER WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN PARTITION WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN
More informationThe Queen Quilter Professional Quilters Kit Frame
The Queen Quilter Professional Quilters Kit Frame Assembly Instructions Table of Contents: Before you begin......................... Pg. 2 Wood parts............................. Pg. 3 Hardware..............................
More informationCIVIL CONSTRUCTION PRODUCT CATALOG VOL. I
CIVIL CONSTRUCTION PRODUCT CATALOG VOL. I Table of Contents Section Description A page CHANCE Helical Round Corner Square Shaft Products Introduction to Round and Square Shaft 3 Square Shaft (SS) Product
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wall Mount A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Floor Mount Wire Mesh Cable Tray System for Channeling of Cable Wiring Features
More informationBID TABULATION SHEET
Title: Guide Rail & Guide Rail Parts Opening Date: Thursday, January 5, 2017 @ 2:00 pm Contract #: CC-0039-17 Total Bids Received: Signed Proposal Stock Disclose BID TABULATION SHEET Non- Collusion Affirm
More informationAmbient Weather EZ Stable Mounting Kit with Mast for AcuRite Weather Stations User Manual
Ambient Weather EZ-30-12-100 Stable Mounting Kit with Mast for AcuRite Weather Stations User Manual Table of Contents 1. Introduction... 1 2. Accessories... 1 3. Parts... 2 4. Warnings... 2 5. Recommended
More informationH O O P RAC K. Simple Security
H O O P RAC K Simple Security The Hoop Rack is a proven design that provides high security and easy bike parking. The Hoop Rack uses thick pipe construction and the full radius of the bend makes the Hoop
More informationKwik-Lock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Installation Instructions Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationGLOSSARY OF TERMS SECTION 8
GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the
More informationPART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
More informationAssembly Instructions 10 X 10 Aluminum Roof Support
Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1
More informationS W E RV E RAC K. Simple Security. Simple Stability.
S W E RV E RAC K Simple Security. Simple Stability. The Swerve Rack is a proven design that provides high security and easy bike parking. The Swerve Rack uses thick pipe construction and the full radius
More informationThru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
More informationBrackets and Tenons. Product Specifications. PB Series
Brackets and Tenons Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion,
More informationRear Mount Installation Instructions
Rear Mount Installation Instructions Ford Transit Low Roof 130 WB Frame Kit Part #: DTC 0809-011 V1.0.10.12.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED
More informationLaser Safety Curtains Page 1 of 5
Laser Safety Curtains Page 1 of 5 Overview For any laser curtain intallation and or hardware questions please do not hesitate to contact Laservision USA at 1-800-393-5565 or chat with our Certified Laser
More informationB3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
More informationMAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases make the traffic signal aesthetically pleasing to the eye. In addition to the standar 4-piece, Pelco also manufactures the bases with an
More informationMechanical Support Systems, Inc.
Mechanical Support Systems, Inc. CATALOG February, 2014 www.thesmartsupports.com 408.601.0155 1 N E W W E B S I T E.N E W P R O D U C T S Mechanical Support Systems, Inc. is certified as a women s business
More informationAPPENDIX FENCE GENERAL NOTES
APPENDIX FENCE GENERAL NOTES 1. Fabric: 9 gage, 2" mesh, knuckle top and bottom, placed on the outside of posts, single fabric width for the entire height. 2. All fencing to be standard galvanized finish.
More informationStandard 25 Wide Structure
Standard 25 Wide Structure Truss Arch Style 2 piece 12ft c/c typical Arch Depth 12 Webbing Diameter 1/2 1 run straight 2 runs straight Wind Brace - up to 120 8 Wind Brace - up to 192 12 Wind Brace - over
More informationHeavy Duty I-Beam Trolley
Heavy Duty I-Beam Trolley ASSEMBLY INSTRUCTIONS I-BEAM TROLLEY Recommended Tools Level Tape Measure Pencil Drill with 1/8, 1/4, and 3/8, Drill Bits and Phillips Bit Socket Wrench with 9/16 Socket I-BEAM
More informationSTEEL PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports
More informationMODULAR HIGH TUNNEL INSTALLATION GUIDE
9615 Grandview Rd. Kansas City, MO 64137 Version: 15 JAN -2015 Sustainable Agriculture Solutions MODULAR HIGH TUNNEL INSTALLATION GUIDE (816) 444-7330 SmallFarmTools.com Thank you for purchasing a Modular
More informationGeneral Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
More informationInstructions and Parts List DR-12N Martin House
Form 36-99 Instructions and Parts List DR-N Martin House Note: It is necessary to install a post before house is put up, but the house can be assembled at any time. House parts Check parts against this
More informationALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
More informationSS1062, SS10621 & SS10621E Free Standing PWC & Fishing Boat Hoist SS1062 SS10621 SS10621E
SS1062, SS10621 & SS10621E Free Standing PWC & Fishing Boat Hoist SS1062 SS10621 SS10621E Midwest Industries, Inc. Page 1 Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003231 REV A 1/25/05 Bundles
More informationSTEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION
B SERIES INDUSTRIAL BENCHES TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLY Read through the assembly instructions
More informationSTRUCTURAL BRACKETS CATALOGUE
08/2011 STRUCTURAL BRACKETS CATALOGUE SUPERIOR QUALITY, HOT DIP GALVANISED, HEAVY DUTY BRACKETS FOR FIXING TIMBER TO TIMBER, TIMBER TO CONCRETE, TIMBER TO STEEL The BOWMAC product range is designed to
More informationSquare Straight Steel - 4 Bolt Base Light Poles
Quick Ship Square Bronze over Galvanized Straight Steel Pole - 4 Bolt Base Square Straight Steel - 4 Bolt Base Light Poles Optional Tenon Mounting (specify) "D" Top Diameter Arm Drilling Per Customer Specs.
More informationBarrier posts of steel tube Ø 76 mm, Ø 89 mm, 70 x 70 mm
of steel tube Ø 76 mm, Ø 89 mm, 70 x 70 mm Steel tube Ø 76, Ø 89, 70 x 70 mm with welded steel cap approx. 900 mm above ground, total length 1400 mm hot-dip galvanized and yellow coated with black stripes
More informationClamps 2 3/4" Mounting Bolts. Ground Wire Dia. (in) MBA-72 5/ /4" Ground Wire Dia. (in) Pole Clearance
Hook for supporting messenger during stringing operation Body tapped for 5/8 diameter bolt Independent clamping - messenger remains clamped if pole shrinkage occurs Teeth on legs to resist movement Aluminum
More informationTesting. Material testing will be according to applicable AASHTO, ASTM or Department methods as specified.
907.01 Section 907. FENCING MATERIALS 907.01 General Requirements. Materials for use in fencing property, right-of-way and other installations must comply with this section. 907.02 Testing. Material testing
More informationD.O.T. Bullet/Bicycle Rail System - Certs Available upon request
D.O.T. Picket Rail - Certs available upon request prior to ordering Top and Bottom Rail: 18-61-240 2 SCH 40 Pipe x 20-2-3/8 x 2.067 x.154 1.264 18-61-241 2 SCH 40 Pipe x 24-2-3/8 x 2.067 x.154 1.264 18-61-243
More informationUNIVERSAL BASES. #60UB - Universal Mounting Base. Same as above for 1/2 inside threads.
UNIVERSAL BASES #60U - Universal Mounting Base. This base can be used for vertical or horizontal mounting. Base is threaded for 3/8 inside threads. Made of bronze material for pastedown or fastening with
More informationAcrylic Claw Foot Tub
Acrylic Claw Foot Tub Wrench or socket Drill & Bits Parts Recommended 2-2 x12 boards 4 Lag Bolts 4 Flat Washers Be sure to re-inforce the floor before securing tub. We recommend 2-2 x12 s securely fastened
More informationHardware Pkg
ASSEMBLY INSTRUCTIONS Horse Shelter 12 x 15 76110678 Hardware Pkg. 76900228 THANK YOU FOR PURCHASING THIS PRODUCT For questions about this product, or parts inquiries, please contact our Customer Service
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationRHINO CART MOBILE FIXTURING STATION ALL-IN-ONE 2018 CATALOG CHARGE RIGHT THROUGH YOUR MOST CHALLENGING PROJECTS!
RINO CART MOBILE FIXTURING STATION Table + Fixture Kit ALL-IN-ONE M obility & Storage 2018 CATALOG CARGE RIGT TROUG YOUR MOST CALLENGING PROJECTS! Strong and Tools Strong and Tools MOBILE FIXTURING STATION
More informationSECTION 7 CHANNEL & SUPPORT SYSTEMS
SECTION 7 CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is adaptable for use in many
More informationMPA-9000 Universal Ceiling Projector Mount Kit
I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low
More informationCall (770) STEP 6: Caulk bolt hole within the bracket for protection from the elements.
Call (770) 777 7007 Structural Deck Support System: Product Numbers: H1-GQ, H2-GCL (Also applies to H1-GK and H2-GCR) STEP 1: Following the spacing guidelines per the deck design and joist layout, mark
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationModular Shelter Breezeway Assembly Instructions
Modular Shelter Breezeway Assembly Instructions Hardware Kit 76900188 THANK YOU FOR PURCHASING THIS PRODUCT Behlen Country has been in the business of providing quality products for more than 75 years.
More informationRHINO CART MOBILE FIXTURING STATION ALL-IN-ONE METRIC CATALOG CHARGE RIGHT THROUGH YOUR MOST CHALLENGING PROJECTS!
RINO CART MOBILE FIXTURING STATION Table + Fixture Kit ALL-IN-ONE M obility & Storage METRIC CATALOG CARGE RIGT TROUG YOUR MOST CALLENGING PROJECTS! Strong and Tools Strong and Tools MOBILE FIXTURING STATION
More informationPolyDock MAY RESULT IN PERSONAL INJURY OR DEATH AND WILL INVALIDATE THE
Floating PolyDock PolyDock Instructions and Safety Tips Floating PRODUCT PolyDock ASSEMBLY INSTRUCTIONS Instructions and Safety Tips - PUT SAFETY FIRST - PUT SAFETY FIRST 1. To avoid the risk of personal
More information8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
More informationAmbient Weather EZ Weather Station Tripod and Mast Assembly for AcuRite Weather Stations User Manual
Ambient Weather EZ-48-100 Weather Station Tripod and Mast Assembly for AcuRite Weather Stations User Manual Table of Contents 1. Introduction... 1 2. Accessories... 1 3. Parts... 2 4. Warnings... 2 5.
More information