Inc. BT Series. BW Series

Transcription

1 Inc BT Series BW Series

2 Inc. Fast Installation One of the prime features of the RangeRack cable tray design is that the channel-style siderails accept spring nuts. This eliminates the need for any drilling and makes for an extremely fast and simple installation. No Drilling All-aluminum Construction: lightweight - 1 person can easily install - less weight for the whole site easy to cut and easy to drill, if necessary connections do not require jumper cables across them non-magnetic properties reduce induction and electrical losses to a minimum very attractive looking, no painting required never any rust problems RangeRack cable tray is classified by UL and c CSA us tested and approved for use in Canada and USA and complies with the electrical codes of both countries (CEC and NEC) Fast Delivery 90% of our orders ship in less than a week, a market leader! A large inventory of popular items are in stock for immediate delivery. Call us toll free or price your own projects at

3 BT Series Cable Tray Siderail Height 1-5/8" (41mm) CSA certified Class 'A' c us Classified by UL Features Unique Design 1. Each rung is inserted through a die-punched hole in the siderail, maximizing the strength. Low-Profile Siderail Allows the end of one cable tray to butt up to the side of another tray for applications where radiused fittings are not required. 2. Rung gets MIG welded inside the siderail. 3. This leaves a clean, smooth finished product with no welds in the area where cables will be run. your own projects at 1

4 BT Series - Cable Tray BT Series - Straight Section CSA rated Class 'A', 37 kg/m, 25 lbs/ft. Classified by UL to NEC (2011 Edition), NEMA VE and ANSI/NFPA 70 Each length of tray requires 2 couplings and fasteners (not included) The recommended coupling and fasteners (per length of tray) are: 2 x BA320 (coupling), 4 x BB200 (5/16" spring nut), 4 x BB210 (5/16" bolt), 4 x BB220 (5/16" flat washer) For extra strength, the BA321 coupling is available To suspend BT Series cable tray, the recommended spacing is every 5'-0" The recommended hanger angle is the BA310, or for applications where electrical isolation is required use the BA313 Cable tray can be cut to a custom length for a cutting fee of $ '-0" and 20'-0" lengths of cable tray can be made available if required To ensure rung strength is sufficient, only 6" spacing is offered in 24", 30" and 36" widths Widths of 24", 30" and 36" have not been CSA tested. Best Value 'A' 'B' 'C' Prix BT $ BT $98.00 BT $93.00 BT $ BT $ BT $94.00 BT $ BT $ BT $86.00 BT $ BT $ BT $ BT $ BT $ BT $ BT Series 'A' 'B' 'C' Prix BT $ BT $ BT $ BT $ BT $ BT $ BT $ BT $ BT $ BT $ BT $ BT $ BT $ BT $ BT $ BT Series - Fittings BT145VI - 45 Vertical Inside Elbow BT190VI - 90 Vertical Inside Elbow 'A' Rad. Rad. BT145VI $ $77.30 BT145VI $ $80.00 BT145VI $ $96.00 BT145VI $ $86.90 BT145VI $ $ " Max. 'A' Rad. Rad. BT190VI $ $ BT190VI $ $ BT190VI $ $ BT190VI $ $ BT190VI $ $ BT145VO - 45 Vertical Outside Elbow 'A' Rad. Rad. BT145VO $ $77.30 BT145VO $ $80.00 BT145VO $ $83.30 BT145VO $ $86.90 BT145VO $ $91.60 BT190VO - 90 Vertical Outside Elbow 'A' Rad. Rad. BT190VO $ $ BT190VO $ $ BT190VO $ $ BT190VO $ $ BT190VO $ $ BT145H - 45 Horizontal Elbow 9" Max. 'A' Rad. Rad. BT145H $ $90.00 BT145H $ $92.00 BT145H $ $96.00 BT145H $ $ BT145H $ $ BT190H - 90 Horizontal Elbow 9" Max. 'A' Rad. Rad. BT190H $ $ BT190H $ $ BT190H $ $ BT190H $ $ BT190H $ $ Call us toll free

5 BT Series - Fittings BT290H - Horizontal Tee BTC Fill-in 9" Max. Each fitting requires fasteners (not included). The fasteners required are 4 x BB200 (5/16" spring nut), 4 x BB210 (5/16" bolt), 4 x BB220 (5/16" flat washer) BTC145 $66.60 'A' 'B' Rad. Rad. BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT290H $ $ BT490H - Horizontal Cross 9" Max. 'A' 'B' Rad. Rad. BT490H $ $ BT490H $ $ BT490H $ $ BT490H $ $ BT490H $ $ BT490H $ $ BT490H $ $ BT490H $ $ BT490H $ $ BT490H $ $ BT490H $ $ BT490H $ $ BT490H $ $ BT490H $ $ BT490H $ $ BTM190 - Mini 90 Elbow BTM290 - Mini Tee BTM490 - Mini Cross BTR - Horizontal Reducer Fitting This fitting fastens to the outside of the cable tray, eliminating the need for couplings Each fitting requires fasteners (not included) The fasteners required are 4 x BB200 (5/16" spring nut), 4 x BB210 (5/16" bolt), 4 x BB220 (5/16" flat washer) Includes 1 - BA310 hanger angle fastened to the fitting BTM $83.30 The 2 inside angles of this fitting fasten to the outside of the cable tray, reducing the quantity of couplings required. Each fitting requires accessories and fasteners (not included). The recommended coupling and fasteners are: 2 x BA320 (coupling), 6 x BB200 (5/16" spring nut), 6 x BB210 (5/16" bolt), 6 x BB220 (5/16" flat washer) B BTM $78.00 This fitting fastens to the outside of the cable tray, eliminating the need for couplings Each fitting requires fasteners (not included) The fasteners required are 8 x BB200 (5/16" spring nut), 8 x BB210 (5/16" bolt), 8 x BB220 (5/16" flat washer) B BTM $83.30 'A' 'B' BTR -9-6 $84.00 BTR $84.00 BTR $86.00 BTR $86.00 BTR $88.00 BTR $90.00 BTR $94.00 BTR $94.00 BTR $94.00 BTR $94.00 your own projects at 3

6 Technical Info Construction Siderail: Extruded Aluminum Alloy 6063 Continuous open channel that accepts spring nuts for a no-drilling, fast and easy installation Nominal Height 1-5/8" (41mm) Loading Height 11/16" (17mm) Minimum Cross-Sectional Area of one pair 0.70 in 2 (451.5mm 2 ) Rung: Extruded Aluminum Alloy 6061 Rounded Edges Inserted through the wall of the siderail to give maximum strength and to eliminate having welds in the area where cables will be run. Certification: CSA, c CSA us, CEC, C22.2 No Classified by UL to NEC (2011 Edition), NEMA VE and ANSI/NFPA 70. Classified by UL as to its suitability as an equipment grounding conductor only (4PH7) Width Dimensions Width 'A' Width 'B' 6 =6" (150mm) 7-9/16" (190mm) 9 = 9" (230mm) 10-9/16" (270mm) 12 = 12" (300mm) 13-9/16" (340mm) 18 = 18" (450mm) 19-9/16" (500mm) *24 = 24" (600mm) *25-9/16" (650mm) *30 = 30" (750mm) *31-9/16" (800mm) *36 = 36" (900mm) *37-9/16" (950mm) * Not CSA Tested Each length of tray is clearly labeled as shown. BT Series Cable Tray Load Ratings Class 'A' Cable Tray Cable Tray Standard CSA C22.2 No /NEMA VE Table 1 Span/load class designation -- USA (See Clauses 4.8.1, 4.8.2, and (c).) Load, kg/m (lb/ft) Span, m (ft) 1.5 (5) 2.4 (8) 3.0 (10) 3.7 (12) 6.0 (20) 37 (25) 5AA 8AA 10AA 12AA 20AA 74 (50) 5A 8A 10A 12A 20A 112 (75) - 8B 10A 12A 20A 149 (100) - 8C - 12C 20C Note: These ratings are also used in Mexico. Table 2 Span/load class designation - Canada (See Clauses 4.8.1, 4.8.2, and 6.1.2(c).) Load,kg/m Span, m A A A D D C A E D C E C D E C E Maximum Rated Simple Beam Load 25 lb/ft(pi) (37 kg/m) * For the testing procedure, the distance between supports was 10'-0" (3m). RangeRack recommends 5'-0" (1.5m) as the distance between supports for Class 'A' cable tray. This way loading can be significantly increased. CSA and NEMA load ratings have a 1.5 safety factor. Cable tray CSA tested was 18" (450mm) wide x 12" (300mm) rung spacing on a simple support span. Continuous support spans may reduce deflection by as much as 50%. Printed in Canada Made in Canada 4 Call us toll free

7 BW Series Cable Tray Siderail Height 4" (100mm) CSA certified Class 'C' c us Classified by UL Features Unique Design Continuous open siderail channels accept spring nuts and make for a no-drilling, fast and easy installation of accessories Continuous open channel on rungs allows use of pipe clamps on top and bottom for heavy cables or conduit Slotted holes on 1" (25mm) centers to easily tie down cables on top and bottom Rungs also accept spring nuts for maximum versatility, eg; bracing equipment underneath, etc Compatibility: RangeRack accessories (eg. couplings, hanger angles, cable hangers, etc) are compatible with each cable tray series (eg. BT, BW). your own projects at 5

8 BW Series - Cable Tray BW4 Series - Straight Section CSA rated Class 'C', 97 kg/m, 65 lbs/ft. Classified by UL to NEC (2011 Edition), NEMA VE and ANSI/NFPA 70 Each length of tray requires 2 couplings and fasteners (not included) The recommended coupling and fasteners(per length of tray) are: 2 x BA320 (coupling), 4 x BB200 (5/16" spring nut), 4 x BB210 (5/16" bolt), 4 x BB220 (5/16" flat washer) For extra strength, the BA321 coupling is available To suspend BW4 Series cable tray, the recommended spacing is every 10'-0" The recommended hanger angle is the BA310, or for applications where electrical isolation is required use the BA313 Cable tray can be cut to a custom length for a cutting fee of $5.00 Best Value 'A' 'B' 'C' BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ 'A' 'B' 'C' BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW $ BW Series - Fittings BW4-145VI - 45 Vertical Inside Elbow BW4-190VI - 90 Vertical Inside Elbow 'A' Rad. Rad. BW4-145VI $ $ BW4-145VI $ $ BW4-145VI $ $ BW4-145VI $ $ BW4-145VI $ $ BW4-145VI $ $ BW4-145VI $ $ " Max. 'A' Rad. Rad. BW4-190VI $ $ BW4-190VI $ $ BW4-190VI $ $ BW4-190VI $ $ BW4-190VI $ $ BW4-190VI $ $ BW4-190VI $ $ BW4-145VO - 45 Vertical Outside Elbow BW4-190VO - 90 Vertical Outside Elbow BW4-145H - 45 Horizontal Elbow 9" Max. 'A' Rad. Rad. BW4-145VO $ $ BW4-145VO $ $ BW4-145VO $ $ BW4-145VO $ $ BW4-145VO $ $ BW4-145VO $ $ BW4-145VO $ $ BW4-190H - 90 Horizontal Elbow 9" Max. 'A' Rad. Rad. BW4-190VO $ $ BW4-190VO $ $ BW4-190VO $ $ BW4-190VO $ $ BW4-190VO $ $ BW4-190VO $ $ BW4-190VO $ $ 'A' Rad. Rad. BW4-145H $ $88.00 BW4-145H $ $91.50 BW4-145H $ $95.20 BW4-145H $ $ BW4-145H $ $ BW4-145H $ $ BW4-145H $ $ 'A' Rad. Rad. BW4-190H $ $ BW4-190H $ $ BW4-190H $ $ BW4-190H $ $ BW4-190H $ $ BW4-190H $ $ BW4-190H $ $ Call us toll free

9 BW Series - Fittings BW4-290H Horizontal Tee 'A' 'B' Rad. Rad. BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ BW4-290H $ $ " Max. BW4-490H Horizontal Cross 9" Max. 'A' 'B' Rad. Rad. BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-490H $ $ BW4-LR Horizontal Reducer Fitting, Left 'A' 'B' BW4-LR -9-6 $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4-LR $ BW4M-490H Mini Cross BW4-RR Horizontal Reducer Fitting, Right 'A' 'B' BW4-RR -9-6 $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ BW4-RR $ This fitting fastens to the outside of the cable tray, eliminating theneed for couplings. Each fitting requires fasteners (not included). The fasteners required are 8 x BB200 (5/16" spring nut), 8 x BB210 (5/16" bolt), 8 x BB220 'A' 'B' (5/16" flat washer). BW4M-490H $85.00 BW4M-190H Mini 90 Elbow The inside angle of this fitting fastens to the outside of the cable tray, reducing the quantity of couplings required. Each fitting requires accessories and fasteners(not included). The recommended coupling and fasteners are: 2 x BA320 (coupling), 4 x BB200 (5/16" spring nut), 4 x BB210 (5/16" bolt), 4 x BB220 (5/16" flat washer). 'A' BW4M-190H-12 $85.00 BW4M-290H Mini Tee The 2 inside angles of this fitting fasten to the outside of the cable tray, reducing the quantity of couplings required. Each fitting requires accessories and fasteners (not included). The recommended coupling and fasteners are: 2 x BA320 (coupling), 6 x BB200 (5/16" spring nut), 6 x BB210 (5/16" bolt), 6 x BB220 (5/16" flat washer). 'A' 'B' BW4M-290H $85.00 your own projects at 7

10 Technical Info Construction BW Series Cable Tray Load Ratings Class 'C' Cable Tray Table 1 of Standard CSA C22.2 No /NEMA VE Span/load class designation - USA (See Clauses 4.8.1, 4.8.2, and 6.1.2(c).) Siderail: Extruded Aluminum Alloy 6063 Continuous open channel that accepts spring nuts for a no-drilling, fast and easy installation Nominal Height 4" (100mm) Loading Height 3-1/4" (83mm) Minimum cross-sectional area of 1 pair 1.00 in 2 (645mm 2 ) Rung: Extruded Aluminum Alloy Rounded Edges Continuous open channel that accepts spring nuts or pipe clamps for added versatility. Slotted holes on 1" (25mm) centres for easy tying down of cables Every second rung is inverted to allow for underside mounting of cables and conduit Wide rung gives maximum cable bearing surface. Certification: CSA, c CSA us, CEC, C22.2 No Classified by UL to NEC (2011 Edition), NEMA VE and ANSI/NFPA 70. Classified by UL as to its suitability as an equipment grounding conductor only (4PH7) Load, kg/m (lb/ft) Span, m (ft) 1.5 (5) 2.4 (8) 3.0 (10) 3.7 (12) 6.0 (20) 37 (25) 5AA 8AA 10AA 12AA 20AA 74 (50) 5A 8A 10A 12A 20A 112 (75) - 8B 10A 12A 20A 149 (100) - 8C - 12C 20C Note: These ratings are also used in Mexico. Table 2 Span/load class designation - Canada (See Clauses 4.8.1, 4.8.2, and 6.1.2(c).) Load,kg/m Span, m D D C E D C E C D E C E Each length of tray is clearly labeled as shown. Width Dimensions: 65 lb/ft(pi) (97 kg/m) Width 'A' Width 'B' 6 = 6" (150mm) 7-9/16" (190mm) 9 = 9" (230mm) 10-9/16" (270mm) 12 = 12" (300mm) 13-9/16" (340mm) 18 = 18" (450mm) 19-9/16" (500mm) 24 = 24" (600mm) 25-9/16" (650mm) 30 = 30" (750mm) 31-9/16" (800mm) 36 = 36" (900mm) 37-9/16" (950mm) Maximum recommended distance between supports 10'-0" (3m). CSA and NEMA load ratings have a 1.5 safety factor. Cable tray tested was 36" (900mm) wide x 12" (300mm) rung spacing on a simple support span. Continuous support spans may reduce deflection by as much as 50%. Made in Canada Printed in Canada 8 Call us toll free

11 Accessories All Aluminum Accessories your own projects at 9

12 Accessories BA300-2 Hole angle - small Used to connect cable tray flush to another object. BA301-2 Hole angle connector Used to connect cable tray to the wall, or cable tray to cable tray when they butt 90 to each other. For a stronger connection, the 4 - hole angle connector BA302 is recommended as it offers much greater rigidity BA302-4-Hole angle connector Used to connect cable tray to the wall, or cable tray to cable tray when they butt 90 to each other. A very popular item that offers the greatest strength for your system BA303 - Wall angle Holds vertical tray away from the wall. BA303-2 BA303-3 BA303-4 BA305 - Angle BA BA BA BA307 - Transition angle Included in the BA10 Series brace kits Holds a length of CHT channel snugly under the cable tray BA307-B - Transition angle BA308 - Transition angle To secure lengths of CHT channel to the cable tray. BA308-L (left) and BA308-R (right - shown) BA308 -L BA308 -R BA309 - Transition angle BA309L To secure vertical lengths of cable tray or channel. BA310 - Hanger angle Our most popular hanger angle Accepts up to 1/2" threaded rod to suspend the cable tray from the ceiling If electrical isolation is required, 2 - BB973 nylon shoulder washers can be used to accept up to 3/8" threaded rod BA309R BA309 -L BA309 -R 10 Call us toll free

13 Accessories BA313 - Heavy duty hanger angle BA314 - Heavy duty flat coupling Accepts up to 3/4" threaded rod to suspend the cable tray from the ceiling If electrical isolation is required, 2 - BB981 nylon shoulder washers can be used to accept up to 1/2" threaded rod BA315 - Flat coupling Not recommended for straight splices of horizontal cable tray BA316 - Joiner Coupling Used in rare cases where 2 parallel lengths of cable tray need to be joined Requires BB555 #10 x 1/2" self drilling screws (not included) BA320 - Channel coupling The most popular coupling. BA321 - Heavy-duty channel coupling Not recommended for use on radiused fittings. BA322 - Flat coupling BA angle (Right) Goes with BA324 to allow you to tee off horizontal cable tray and go up or down at a 45 angle. BA BA BA BA324-L BA angle (Left) Goes with BA323 to allow you to tee off horizontal cable tray and go up or down at a 45 angle. BA325 - Adjustable coupling Sold individually Each BA325 requires 2 spring nuts (BB200), 2 bolts (BB210) and 2 flat washers (BB220). BA324-R your own projects at 11

14 Accessories BA340 - Retainer bar Increases the loading depth on the BT Series cable tray Recommended 18" (450mm) spacing Custom heights available - please enquire BA340-3 BA340-4 BA340-5 BA340-6 BA346 - Cable hanger (small) To isolate supplementary cables (eg: ground cables) from the main cable tray Has a width of 1-5/8". The drop and length can be specified to suit. Recommended 18" (450mm) spacing B BA BA BA347 - Cable hanger (large) To isolate supplementary cables (eg: ground cables) from the main cable tray Has a width of 2-1/4". The drop and length can be specified to suit. Recommended 18" (450mm) spacing B BA BA350 - Wire duct hanger Supports supplementary pvc wire duct on the side of the cable tray The drop and length can be specified to suit. B BA BA BA BA4 - Tray end (BT) BA4 - Tray end (BW) Neatly closes off the end of a cable tray run. Neatly closes off the end of a cable tray run. BA4-06 BA4-09 BA4-12 BA4-18 BA4-24 B BA BA BA BA BA BA BA BA5 - Side-wall bracket BA6 - End-wall bracket BA5-00 Gives a 1-1/2" (40mm) clearance from the wall Requires 2 J-bolts (BB316 for BT Series, BB318 for BW4 Series) If electrical isolation is required, requires 2 - BB973 nylon shoulder washers and 1 - BB955 nylon flat washer per j-bolt. BA5-00 BA5-06 BA5-09 BA5-12 BA5-18 BA5-24 BA5-30 BA5-36 BA6-00 Requires 2 J-bolts (BB316 for BT Series, BB318 for BW4 Series) If electrical isolation is required, requires 2 - BB973 nylon shoulder washers and 1 - BB955 nylon flat washer per J-bolt. BA6-00 BA6-06 BA6-09 BA6-12 BA6-18 BA6-24 BA6-30 BA Call us toll free

15 Accessories BA7 - Threaded rod ceiling bracket Accepts up to 1/2" (13mm) threaded rod Simply screws to the ceiling for a fast installation BA7-00 BA7-06 BA7-09 BA7-12 BA7-18 BA7-24 BA7-30 BA7-36 BA8 - Under-slung cable support Provides a supplementary level for extra cables Can be used as feet for floor mount applications on 5'-0" (1500mm) centres BA8-06 BA8-09 BA8-12 BA8-18 BA8-24 BA8-30 BA8-36 BA9 - Horizontal-vertical bracket Allows vertical cable tray to be securely fastened to horizontal cable tray Requires 4 spring nuts (BB200), 4 bolts (BB210) and 4 flat washers (BB220). BA10 - Brace kit This brace kit securely braces racks or equipment below the cable tray. Variations can be made to suit specific applications. We supply nylon washers to provide electrical isolation from the cable tray. BA9-06 BA9-09 BA9-12 BA9-18 B BA A BA A BA A BA B BA C BA11 - Dropout (BT) Clips tightly on the rung, no fasteners required. BA11 - Dropout (BW) Clips to the rung, no fasteners required Exact Length BA /4" BA /4" BA /4" BA /4" BA /4" Exact B Length BA /2" BA /2" BA /2" BA /2" BA /2" BA /2" BA /2" your own projects at 13

16 Accessories BA11S - Side Dropout (BT) Includes 2 removable posts, 3" long, gray PVC material. 3/4" radius inside of cable tray, 2" radius on the outside. Requires 2 spring nuts (BB200), 2 bolts (BB210) and 2 flat washers (BB220). Exact B Length BA11S BA11S BA11S BA11S BA11S BA11S-4 - Side Dropout (BW) Includes 2 removable posts, 3" long, gray PVC material. 3/4" radius inside of cable tray, 2" radius on the outside. Requires 2 spring nuts (BB200), 2 bolts (BB210) and 2 flat washers (BB220). Exact B Length BA11S BA11S BA11S BA11S BA11S BA12 - Reducing connector (BT) A cost effective way to connect 2 different widths of cable tray. Requires 4 spring nuts (BB200), 4 bolts (BB210) and 4 flat washers (BB220). BA12 is an economical alternative to the BTR Horizontal Reducer Fitting. BA12-03 BA12-06 BA12-09 BA12-12 BA12-15 BA12-18 BA12 - Reducing connector (BW) A cost effective way to connect 2 different widths of cable tray. Requires 4 spring nuts (BB200), 4 bolts (BB210) and 4 flat washers (BB220). An economical alternative to the BW4-LR or BW4-RR Horizontal Reducer Fitting. B BA BA BA BA BA BA BA BA BA BA BA13 - Solid Bottom Tray Sheet (BT & BW) BA16S - Straight Divider (BW) This.050" (1mm) thick aluminum sheet is for locations where security or cable safety is a concern. Comes in 10'-0" (3048mm) lengths and lays on top of the rungs. Good for BT Series and BW4 Series cable tray. BA13-06 BA13-09 BA13-12 BA13-18 BA13-24 BA '-0" (3048mm) long Requires BB955 #10 x 1/2" self drilling screws (not included). B BA16S -4 BA13 - Fitting Solid Bottom Tray Sheet (BT & BW) To order, simply add "BA13-" before the part number of the fitting, eg: BA13-BW4-290H Made from.050" (1mm) aluminum material. Good for BT Series and BW4 Series cable tray. Simply lays on top of the rungs. BA16F - Flexible Divider (BW) 10'-0" (3048mm) long Requires BB955 #10 x 1/2" self drilling screws (not included). B BA16F -4 BA VO - 90 Vertical Outside Divider (BW) Requires BB955 #10 x 1/2" self drilling screws (not included). B Rad. BA VO -12 BA VO -24 BA VI - 90 Vertical Inside Divider (BW) Requires BB955 #10 x 1/2" self drilling screws (not included). B Rad. BA VI -12 BA VI Call us toll free

17 Accessories BA VO - 45 Vertical Outside Divider (BW) Requires BB955 #10 x 1/2" self drilling screws (not included). B Rad. BA VO -12 BA VO -24 BA18 - Solid cable tray cover (BW) 10'-0" (3048mm) long Made from.050" (1mm) aluminum material Requires BB955 #10 x 1/2" self drilling screws (not included) B BA BA BA BA BA BA BA BA VI - 45 Vertical Inside Divider (BW) Requires BB955 #10 x 1/2" self drilling screws (not included). B Rad. BA VI -12 BA VI -24 BA18 - Solid cable tray cover (BT) 10'-0" (3048mm) long Made from.050" (1mm) aluminum material Requires BB955 #10 x 1/2" self drilling screws (not included) BA18-06 BA18-09 BA18-12 BA18-18 BA18-24 BA18 - Solid cable tray cover (BT & BW) To order, simply add "BA18-" before the part number of the fitting, eg: BA18-BW4-290H Made from.050" (1mm) aluminum material. Requires BB955 #10 x 1/2" self drilling screws (not included) CSB - Ceiling hanger bracket Simpy screws to the ceiling to suspend the cable tray Very popular for the time saved during installation, no threaded rod to cut and multiple nuts and bolts to work with Any drop length can be made, please specify your requirement. B CSB CSB CSB CSB CSB CSB CSB CSB CSB CSB CSB CSB CSB CCT - Center Hanger Facilitates suspension of the cable tray in the centre Allows for very easy cable installation and removal Accepts up to 5/8" threaded rod If electrical isolation is required, 2 - BB981 nylon shoulder washers can be used to accept up to 1/2" threaded rod CHT - 7/8" x 1-5/8" Aluminum Channel Accepts spring nuts Available in 8-0 (2438mm), 10-0 (3048mm), 12-0 (3658mm) and 20-0 (6096mm). Can be cut to a specified length This particular item is also used as the siderail of the BT Series cable tray. CCT -06 CCT -09 CCT -12 CCT -18 CCT -24 CCT -30 CCT -36 Length (inches) CHT - 96 CHT -120 CHT -144 CHT -240 CCX - Center Support Bracket CHW - 11/16" x 1-9/16" Aluminum Channel Accepts up to 1/2" threaded rod Requires 2 spring nuts (BB200), B 2 bolts (BB210) CCX and 2 flat CCX washers CCX (BB220). CCX CCX CCX CCX Accepts spring nuts Available in 10'-0" (3048mm) Can be cut to a specified length This particular item is also used as the rung of the BW4 Series cable tray. Length (inches) CHW -120 your own projects at 15

18 Fasteners All fasteners are zinc-plated in accordance with ASTM B 633 as per standard CSA C22.2 No /NEMA VE and can be safely coupled with aluminum. Spring nut Flat washer Simply insert anywhere along the length of the cable tray siderail to fasten all accessories. Fits in the rung of the BW4 Series cable tray for added flexibility. Recommended Size 5/16" (BB200) is the recommended size to use with all the cable tray accessories. Thread Size BB199 1/4" BB200 5/16" BB201 3/8" BB203 1/2" BB205 5/8" No discount offered for order quantity of less than 100. Size BB219 1/4" Recommended Size BB220 5/16" BB221 3/8" BB223 1/2" BB225 5/8" Bolt Lock washer Recommended Size No discount offered for order quantity of less than 100. Thread Size BB210 5/16" x 3/4" BB211 5/16" x 1" BB215 3/8" x 3/4" No discount offered for order quantity of less than 100. Size BB229 1/4" BB230 5/16" BB231 3/8" BB233 1/2" BB235 5/8" Hex nut J-bolt (BW) No discount offered for order quantity of less than 100. Thread Size BB239 1/4" BB240 5/16" BB241 3/8" BB243 1/2" BB245 5/8" Secures BW Series siderail Required for BA5 Series side-wall brackets and BA6 Series end-wall brackets. Size BB318 3/8" x 3-3/4" J-bolt (BT) Threaded Rod Hooks over BT Series siderail Required for BA5 Series side-wall brackets and BA6 Series end-wall brackets. 10'-0" long, zinc plated. Size BB316 3/8" x 3-3/4" Size BB436 1/4" x 120" BB437 5/16" x 120" BB438 3/8" x 120" BB440 1/2" x 120" BB442 5/8" x 120" Self drilling metal screw Required for BA11 Series dropouts used on BW Series Required for BA16 Series dividers and BA18 Series solid cover No discount offered for order quantity of less than 100 Size BB555 10" x 1/2" BB886 - Plastic end cap Fits into the end of the cable tray channel. 16 Call us toll free

19 Fasteners BB912 - Nylon bushing 1 - BB912 with 2 - BB940 allows 5/8" threaded rod to be electrically isolated with hanger angle BA313 A more cost effective way to isolate the BA313 is to use 1/2" treaded rod with 2 - BB981 A:.75" B:.625" T:.170" BB926 - Nylon flat washer 1 - BB926 with 1 - BB968 isolates most BA3 Series accessories and the CSB ceiling hanger bracket A: 1.5" B:.375" T:.080" BB933 - Nylon flat washer A: 2" B:.51" T:.062" BB940 - Nylon flat washer 1 - BB912 with 2 - BB940 allows 5/8" threaded rod to be electrically isolated with hanger angle BA313 A more cost effective way to isolate the BA313 is to use 1/2" treaded rod with 2 - BB981 A: 1.25" B: 0.625" T: 0.063" BB955 - Nylon flat washer 1 - BB955 with 2 BB973 allows j-bolts to be isolated with BA5 Series sidewall brackets and BA6 Series end-wall brackets. A: 2.26" B: 1.01" T:.075" BB960 - Nylon shoulder washer Used on the BA302 to isolate the screw that secures the cable tray to a wall. A:.562" B:.26" C:.375" T1:.060" T2:.062" BB968 - Nylon shoulder washer 1 - BB926 with 1 - BB968 isolates many BA3 Series accessories and the CSB ceiling hanger bracket. A:.75" B:.323" C:.375" T1:.047" T2:.047" BB973 - Nylon shoulder washer 1 - BB955 with 2 - BB973 allows j-bolts to be electrically isolated with BA5 Series sidewall brackets and BA6 Series end-wall brackets 2 - BB973 nylon shoulder washers isolate up to 3/8" threaded rod with the BA310 hanger angle. A: 1.005" B:.453" C:.500" T1:.050" T2:.070" T2:.047" BB976 - Nylon shoulder washer A: 1.000" B:.375" C:.500" T1:.195" T2:.125" BB981 - Nylon shoulder washer 2 - BB981 isolates up to 1/2" threaded rod with the BA313 heavy duty hanger angle A: 1.125" B:.515" C:.740" T1:.093" T2:.062" T2:.047" your own projects at 17

20 List For a full product description and product dimensions, consult the previous pages of this brochure. ACCESSORIES BA300 $2.80 BA301 $2.80 BA302 $2.80 BA303-2 $3.15 BA303-3 $3.30 BA303-4 $3.50 BA305 $2.80 BA307 $2.80 BA307-B $3.80 BA308L $8.35 BA308R $8.35 BA309L $9.50 BA309R $9.50 BA310 $2.80 BA313 $2.80 BA314 $7.00 BA315 $2.80 BA316 $5.25 BA320 $3.33 BA321 $5.25 BA $3.75 BA $3.75 BA $3.75 BA324-L $6.75 BA324-R $6.75 BA325 $7.00 BA340-3 $1.75 BA340-4 $1.95 BA340-5 $2.10 BA340-6 $2.30 B BA $3.44 BA $3.85 B BA $4.76 B BA $9.15 BA $11.00 BA $12.90 BA4-06 $9.75 BA4-09 $11.00 BA4-12 $12.65 BA4-18 $15.50 BA4-24 $18.35 B BA $14.30 BA $16.00 BA $17.25 BA $21.40 BA $25.55 BA $28.60 BA $32.15 BA5-00 $12.30 BA5-06 $17.50 BA5-09 $20.00 BA5-12 $22.50 BA5-18 $27.00 BA5-24 $38.00 BA5-30 $43.00 BA5-36 $49.00 BA6-00 $12.30 BA6-06 $13.00 BA6-09 $14.50 BA6-12 $16.00 BA6-18 $19.00 BA6-24 $22.00 BA6-30 $25.00 BA6-36 $28.00 BA7-00 $8.50 BA7-06 $12.50 BA7-09 $13.40 BA7-12 $14.25 BA7-18 $16.65 BA7-24 $18.75 BA7-30 $21.15 BA7-36 $23.50 BA8-06 $12.60 BA8-09 $14.00 BA8-12 $15.35 BA8-18 $18.20 BA8-24 $21.10 BA8-30 $23.80 BA8 BA4-36 $26.50 BA9-06 $25.40 BA4BA9-09 $31.00 BA9-12 $36.95 BA9-18 $46.90 B BA A $27.70 BA5 BA A $28.30 BA A $29.00 BA B $37.00 BA C $29.00 BA11-06 $13.80 BA11-09 $14.60 BA6 BA11-12 $17.60 BA11-18 $21.75 BA11-24 $25.90 B BA $13.80 BA $14.60 BA $17.60 BA $21.75 BA $25.90 BA $30.10 BA $34.00 B BA11S $50.00 BA7 BA11S $52.00 BA11S $53.00 BA11S $57.00 BA11S $60.00 B BA11S $50.00 BA8 BA11S $52.00 BA11S $53.00 BA11S $57.00 BA11S $60.00 BA12-03 $8.30 BA12-06 $9.80 BA12-09 $10.40 BA12 BA9-12 $11.00 BA12-15 $11.50 BA12-18 $ BA5-00 BA6-00 Call us toll free

21 List BA12 (BW) B BA $11.50 BA $14.20 BA $17.50 BA $17.50 BA $24.20 BA $21.80 BA $29.10 BA $26.60 BA $34.50 BA $31.60 BA13 BA16S BA16F BA VO BA VI B B B Rad. BA13-06 $28.00 BA16S-4 $24.00 BA16F -4 $37.00 BA VO -12 $39.00 BA13-09 $36.00 BA VO -24 $44.30 BA13-12 $41.70 BA13-18 $54.80 BA13-24 $71.50 BA13-30 $84.70 BA VO BA13-36 $ B Rad. BA VI BA VO -12 $36.00 BA VO -24 $38.50 B Rad. BA VI -12 $39.00 BA VI -24 $44.30 B Rad. BA VI -12 $36.00 BA VI -24 $38.50 CSB CHW BA18 (BT) BA18-06 $30.00 BA18-09 $37.50 BA18-12 $44.50 BA18-18 $59.00 BA18-24 $72.00 BA18 (BW) B BA $36.30 BA $43.00 BA $50.00 BA $65.00 BA $78.50 BA $93.50 BA $ B CSB $16.95 CSB $18.00 CSB $14.60 CSB $16.00 CSB $17.25 CSB $19.35 CSB $21.75 CSB $23.80 CSB $22.00 CSB $26.90 CSB $22.40 CSB $24.70 CSB $30.00 CCT CCT -06 $31.00 CCT -09 $31.50 CCT -12 $33.00 CCT -18 $34.00 CCT -24 $41.00 CCT -30 $44.00 CCT -36 $49.00 CCX B CCX $25.00 CCX $26.00 CCX $26.00 CCX $28.00 CCX $30.50 CCX $32.00 CCX $34.00 Length (inches) CHW -120 $1.80 /ft. CHT Length (inches) CHT - 96 $2.75/ft. CHT -120 $2.75/ft. CHT -144 $2.75/ft. CHT -240 $2.75/ft. Fasteners Thread Size BB199 1/4" $1.25 /ea. BB200 5/16" $1.12 /ea. BB201 3/8" $1.35 /ea. BB203 1/2" $1.55 /ea. BB205 5/8" $6.85 /ea. Thread Size BB210 5/16 x 3/4 $15.00 /c BB211 5/16 x 1 $16.00 /c BB215 3/8 x 3/4 $16.00 /c Size BB219 1/4" $6.00 /c BB220 5/16" $6.00 /c BB221 3/8" $11.00 /c BB223 1/2" $20.00 /c BB225 5/8" $29.00 /c Size BB229 1/4" $6.00 /c BB230 5/16" $7.00 /c BB231 3/8" $8.00 /c BB233 1/2" $10.00 /c BB235 5/8" $16.00 /c Thread Size BB239 1/4" $7.00 /c BB240 5/16" $8.00 /c BB241 3/8" $11.00 /c BB243 1/2" $18.00 /c BB245 5/8" $23.00 /c Size BB316 3/8" x 3-3/4" BB886 $0.52 /ea. $2.20 /ea. Size BB318 3/8" x 3-3/4" BB926 $1.03 $4.16 /ea. Size BB436 1/4" x 120" $9.00 BB437 5/16" x 120" $11.00 BB438 3/8" x 120" $13.00 BB440 1/2" x 120" $21.00 BB442 5/8" x 120" $25.00 Size BB555 #10 x 1/2" $13.00 /c BB886 $0.85 /ea. BB933 $1.03 BB940 $0.61 BB955 $1.16 BB960 $0.42 BB968 $0.49 BB973 $0.88 BB976 $1.64 BB981 $0.63 your own projects at 19

22 Notes: Printed in Canada Made in Canada 20 Call us toll free

23 Inc. RangeRack cable tray was designed in 1994 at the specific request of the telecom industry for a lightweight cable tray system that was strong, yet fast and easy to install. Our mission here at RangeRack Inc, is to continue providing our clients with the market-leading products and customer service that our company has become known for. Located in Pointe-Claire (Montreal), Quebec, our modern production facility is equipped to meet any special requirement you may have.

24 Inc. RangeRack has succeeded in satisfying many: national cell phone network providers (eg: Bell, Telus, Rogers, AT&T, Verizon Wireless, Sprint, US Cellular and T-Mobile) national railway company signal houses (eg: Amtrak, CN) cable TV network providers (eg: Cogeco, Videotron) cabling contractors electrical contractors for various commercial and industrial projects, eg: - factories and industrial shops - banks - LAN rooms - POP (point of presence) substations - schools and universities - hospitals All RangeRack products are manufactured to the highest standard of quality using only the best grade of material available. Call us toll free. your own projects at RangeRack, Inc. 100-C Hymus Blvd. Pointe-Claire, Quebec Canada H9R 1E4 Tel: Fax: info@rangerack.ca Printed in Canada Made in Canada