Mesh cable tray systems

Size: px

Start display at page:

Download "Mesh cable tray systems"

August Smith
6 years ago
Views:

1 Mesh cable tray systems

Quick Screwless Safe OBO Bettermann's mesh cable tray systems are the ideal basis for quick, safe and economical cable routing in all areas of professional electrical installations.

2 Quick Screwless Safe OBO Bettermann's mesh cable tray systems are the ideal basis for quick, safe and economical cable routing in all areas of professional electrical installations. The GR Magic, the Magic G mesh cable tray and the C mesh cable tray with their various shapes, side heights, surfaces and range of accessories are ideal for satisfying the most varied cable routing requirements. The systems are well thought through and extremely efficient when in daily use. Installation time is an important factor when it comes to choosing whether to buy a product or not. With the GR-Magic mesh cable tray in both the standard design or as a G mesh cable tray, OBO Bettermann can offer a true system innovation. Thanks to the patented connection system developed by OBO, the mesh cable tray can be mounted in a matter of seconds without any connectors or tools. Just connect the two parts and you're done. The system has therefore redefined the concepts of rapid mounting and flexibility. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 2

3 Logical The OBO mesh cable tray system Magic mesh cable tray Side height F Pre-galvanised G Electrogalvanised FT Hot-dip galvanised A2 Stainless steel A4 Stainless steel * For fixing on brackets, suspension fittings and spacer clamps Magic G mesh cable tray Side height G Electrogalvanised FT Hot-dip galvanised A2 Stainless steel A4 Stainless steel * For direct wall or ceiling mounting 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 C mesh cable tray Side height 50 FT Hot-dip galvanised A2 Stainless steel For fixing on brackets, suspension fittings and spacer clamps * Further combinations of surfaces and systems on request *

Magic mesh cable tray The new GR-Magic mesh cable tray really speeds up installation and manages this with no loss of stability and load-bearing capacity.

4 Magic mesh cable tray The new GR-Magic mesh cable tray really speeds up installation and manages this with no loss of stability and load-bearing capacity. The moulded connectors for screwless quick mounting ensure extremely quick installation times, even for complex mounting operations. Load tests show that GR-Magic systems can fully match up to traditional screw connections. The mesh cable trays are available with side heights of 5, 55 and 05 in the electrogalvanised Titan look version, hot-dip galvanised version and in stainless steel. The comprehensive range of practical accessories, such as mesh cable tray bends, clamping pieces, quick connectors, barrier strips, suspension profiles, brackets, etc., ensures that the product range is complete down to the smallest detail. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 4

Compliant with standards The electrical properties are also first class: the values required by the VDE guidelines 069 and in the new IEC/EN 657 Cable management.

5 Compliant with standards The electrical properties are also first class: the values required by the VDE guidelines 069 and in the new IEC/EN 657 Cable management. Cable tray systems and cable ladder systems are achieved easily. In addition, the system satisfies the stringent NEMA requirements for the American market. As a result, the GR-Magic mesh cable tray can also be used as a protective conductor. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 5

6 Function maintenance Laying system/support system: GRM screwless straight connection, fire-tested Safety cables: E0-E90 Tested and approved cable system with function maintenance according to DIN 402 Part 2 Function maintenance with the GR-Magic Function maintenance with the GR-Magic Besides rapid mounting and the wide range of applications, the GR- Magic offers another key benefit: it can be used to maintain function for fire safety purposes in order to ensure supply to safety-related systems for a certain period of time in the event of a fire. The GR Magic has proven its stability in an impressive manner in fire testing according to DIN 402 Part 2. This installation design was put through its paces with a cable load of 5 kg/m and a support distance of.5 m. Thanks to the GR-Magic, a further support system is now available for which function maintenance comes assured. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 6

Impressive range of accessories In addition to providing quick straight connections, the innovative GR-Magic range of accessories is also easy to handle and use thanks to its screwless connections.

7 Impressive range of accessories In addition to providing quick straight connections, the innovative GR-Magic range of accessories is also easy to handle and use thanks to its screwless connections. For example, the mesh cable trays can be flexibly installed on mounting rails using fastening clips or on wall and support brackets using clamping lugs. Cut mesh cable trays without moulded connectors are easy to join together with a quick connector, while barrier strips are fastened with a clamping piece and cable exit plates with clamping lugs. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 7

8 Magic down to the last detail The system's effectiveness is provided by the perfectly formed mesh cable tray for screwless straight connection, complemented by the wide range of well-thought-out system components. The many lockable and clamp-on elements continue the basic principle of the Magic system down to the last detail. Exceptional ease of use is also a priority for all additional fastening and system components, for example when creating bends of different radii with special corner connectors mesh cable tray bend Quick connector 4 Mesh cable tray connector, long 5 Corner connector 6 Wall and central fastener 7 Mounting plate MPG 8 Wall and support bracket 9 Side holder 0 Centre suspension Ceiling bracket, variable 2 Spacer clamp Earthing terminal with earthing screw 4 Cable exit plate 5 Fastening element for junction boxes 6 Installation profile 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 8

9 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 9

10 As flexible as your work Mesh cable trays cannot always be routed lengthways. Depending on the application, it is necessary to overcome structural obstacles or to make unusual changes of direction, horizontally and vertically. As the OBO mesh cable trays can be cut to size as required and the system has an extensive range of accessories, it can be adapted to any structural conditions. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 0

Backwaren GmbH Product: mesh cable tray in various widths

11 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Reference Lieken Brot-und Backwaren GmbH Product: mesh cable tray in various widths and side heights Units: 2.5 km Location of use: industrial and administrative areas

A variety of surfaces The mesh cable trays are available in a wide variety of surface designs that enable them to be used both indoors and outdoors.

This provides the mesh cable trays with an unmistakable, high-quality optical appearance, which closely resembles stainless steel making it ideal for use in false ceilings and where in view.

12 A variety of surfaces The mesh cable trays are available in a wide variety of surface designs that enable them to be used both indoors and outdoors. For indoors, OBO has developed the electrogalvanised surface further and made it even more visually appealing. The result is the new OBO Titan look. This provides the mesh cable trays with an unmistakable, high-quality optical appearance, which closely resembles stainless steel making it ideal for use in false ceilings and where in view. For use in aggressive environments as well as in the food industry, OBO offers the GR mesh cable tray in the stainless steel.40 and.440 versions. The mesh cable trays are made from quality stainless steel wires and pickled in a subsequent process. This protects the wires against extreme chemical loads. As they are taste-neutral and resistant to cleaning agents, disinfectants and sterilisers, these mesh cable tray systems can also be used in the food industry. F Surface Hot galvanisation Coating thickness Average value approx. 8-0 µm Standards Galvanisation to DIN EN Location of use Indoors Surface Coating thickness Standards Location of use G Electrogalvanisation Average value approx μm Electrolytic galvanisation in accordance with DIN EN 229 Indoors 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 2

Surface FT Hot-dip galvanisation Coating thickness Average value approx.

Stainless steel A2 European material designation:.

humidity and aggressive atmosphere, food industry, chemical and pharmaceuticals industry 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

13 Surface FT Hot-dip galvanisation Coating thickness Average value approx µm Standards Location of use Galvanisation according to the hot-dip method to DIN EN ISO 46 Outdoors A2 Material Designations Special features Location of use Stainless steel A2 European material designation:.40 American material designation: AISI 04 Welded components are also passivated; unwelded components are rinsed and degreased Industrial areas with high levels of humidity and aggressive atmosphere, food industry, chemical and pharmaceuticals industry 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Material Designations Special features Location of use A4 Stainless steel A4 European material designation:.440/.4404/.457 American material designation: AISI 6/6L/6Ti Welded components are also passivated; unwelded components are rinsed and degreased Buildings or areas with almost constant condensation and high levels of impurities, coastal or offshore areas with high levels of salt

Magic G mesh cable tray The system for direct wall and ceiling mounting Optimum room usage Even if space is tight, the Magic G mesh cable tray can be mounted almost anywhere.

This system also scores highly thanks to its screwless design.

14 Magic G mesh cable tray The system for direct wall and ceiling mounting Optimum room usage Even if space is tight, the Magic G mesh cable tray can be mounted almost anywhere. It can be attached directly to walls and ceilings in almost any position, providing optimum cable routing particularly in false ceilings, server rooms and office buildings. This system also scores highly thanks to its screwless design. A variety of materials Dry rooms, wet rooms, outdoor areas, the food industry or tunnel construction the GR-Magic has the right surface for any area. The product range runs from electrogalvanised and hot-dip galvanised right through to stainless steel variants. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 4

C mesh cable tray Maximum load-bearing capacity and versatility 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 The C mesh cable tray system from OBO Bettermann can fulfil the

15 C mesh cable tray Maximum load-bearing capacity and versatility 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 The C mesh cable tray system from OBO Bettermann can fulfil the highest requirements for load capacities and versatility. The C shape allows support widths of up to three metres. With a side height of 50 and optimised accessories such as clamping pieces, barrier strips or installation profiles, the system is the perfect complement to OBO's complete mesh cable tray portfolio. It is used both in industry and in all other areas of professional electrical installations. 5

16 Tested quality The in-house BET Test Centre continually monitors and tests the quality of OBO products. Here, OBO simulates the loads that the mesh cable tray systems have to withstand on a constant basis. We determine the maximum load capacity and carrying capacity of the system, as well as its resistance to corrosion. We are able to prove standardised testing of EMC properties using test reports. In other words, OBO places paramount importance on safety. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 6

04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 The KTS testing

Thanks to its continuous further development and adaptation to the latest requirements,

For example, the tests required by DIN EN 657 can be carried out.

17 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 The KTS testing system was specially constructed for the testing of OBO Bettermann cable support systems. Thanks to its continuous further development and adaptation to the latest requirements, it can offer comprehensive testing options. For example, the tests required by DIN EN 657 can be carried out. These prove the safe working load (SWL) and therefore the reliable load-bearing capacity of the systems. Tested quality without compromise made by OBO. 7

18 Side height 5 GR-Magic mesh cable tray GRM 5 50 G GRM 5 00 G GRM 5 50 G GRM 5 0 G GRM 5 00 G GRM 5 50 FT GRM 5 00 FT GRM 5 50 FT GRM 5 0 FT GRM 5 00 FT St Steel G Width Wire Electrogalvanised FT Hot-dip galvanised m No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00 (exception: GRM 5/50 = x 00 ). Mesh cable tray with shaped connector of side height 5. kg/00 m Dimensions GRM 5 50 G GRM 5 00 G GRM 5 50 G GRM 5 0 G GRM 5 00 G Length B Wire Useful crosssection cm² Load 8 GRM 5 50 G GRM 5 00 G GRM 5 50 G GRM 5 0 G GRM 5 00 G.0 m.5 m 2.0 m Load diagram, GR-Magic mesh cable tray, type GRM 5 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

19 Side height 5 GR-Magic mesh cable tray Width GRM 5 50VA40 GRM 5 00VA40 GRM 5 50VA40 GRM 5 0VA40 GRM 5 00VA40 GRM 5 50VA440 GRM 5 00VA440 GRM 5 50VA440 GRM 5 0VA440 GRM 5 00VA440 Wire V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 m kg/00 m No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00 (exception: GRM 5/50 = x 00 ). Mesh cable tray with shaped connector of side height 5. GRM 5 50VA40 GRM 5 00VA40 GRM 5 50VA40 GRM 5 0VA40 GRM 5 00VA40 Length B Useful crosssection cm² Dimensions 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GRM 5 50VA40 GRM 5 00VA40 GRM 5 50VA40 GRM 5 0VA40 GRM 5 00VA40.0 m.5 m 2.0 m Load diagram, GR-Magic mesh cable tray, type GRM 5 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Load 9

20 Side height 5 Barrier strip TSG 0 FS St Steel Plate H thickness L V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 Ti FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Barrier strip for separation of cables of different voltages or functions. m kg/00 m TSG 0 DD TSG 0 VA TSG 0 VA Barrier strip connector TSGV VA40 0 kg/ V2A Stainless steel, grade 0 Barrier strip connector for screwless connection of the TSG barrier strip in all side heights Hold-down clamp for barrier strip fastening KS GR VA40 V2A Stainless steel, grade 0 Hold-down clamp for fastening barrier strips in mesh cable trays. 0 kg/ Hold-down clamp for barrier strip fastening GKT 8 G kg/ GKT 8 FT GKT 8 VA GKT 8 VA St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Clamp for fastening barrier strip in mesh cable trays. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

21 Side height 55 GR-Magic mesh cable tray GRM F GRM F GRM 55 0 F GRM F GRM F GRM F GRM F GRM G GRM G GRM G GRM 55 0 G GRM G GRM G GRM G GRM G GRM G GRM G Width Wire St Steel F Hot-dip galvanised G Electrogalvanised m kg/00 m No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00 (exception: GRM 55/50 = x 00 ). Description, surface F = pre-galvanised wires according to DIN EN 0244/2 (surface approx. 0 µm). Mesh cable tray with shaped connector of side height 55. GRM F GRM F GRM 55 0 F GRM F GRM F GRM F GRM F Length B Wire Useful crosssection cm² Dimensions 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GRM F GRM F GRM 55 0 F GRM F GRM F GRM F GRM F.0 m.5 m 2.0 m 2.5 m Load diagram, GR-Magic mesh cable tray, type GRM 55 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Load 2

Side height 55 GR-Magic mesh cable tray Width GRM 55 50 FT GRM 55 00 FT GRM 55 50 FT GRM 55 0 FT GRM 55 0 4.

800 244.00 287.700.600 60045 60046 60048 6004 60042 600424 600428 60042 60046 No additional connection components are required for the mesh cable tray, it is simply interlocked.

22 Side height 55 GR-Magic mesh cable tray Width GRM FT GRM FT GRM FT GRM 55 0 FT GRM FT GRM FT GRM FT GRM FT GRM FT St Steel FT Hot-dip galvanised Wire m kg/00 m No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00 (exception: GRM 55/50 = x 00 ). Mesh cable tray with shaped connector of side height 55. Dimensions GRM FT GRM FT GRM FT GRM 55 0 FT GRM FT GRM FT GRM FT GRM FT GRM FT Length B Wire Useful crosssection cm² Load 22 GRM FT GRM FT GRM FT GRM 55 0 FT GRM FT GRM FT GRM FT GRM FT GRM FT.0 m.5 m 2.0 m 2.5 m Load diagram, GR-Magic mesh cable tray, type GRM 55 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

Side height 55 GR-Magic mesh cable tray Width GRM 55 50VA40 GRM 55 00VA40 GRM 55 50VA40 GRM 55 0VA40 GRM 55 00VA40 GRM 55 400VA40 GRM 55 500VA40 GRM 55 600VA40 GRM 55 50VA440 GRM 55 00VA440 GRM 55

8 50.9 00.9 50.9 0.9 00 4.8 400 4.8 500 4.8 600 4.8 V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 GB Stained m kg/00 m 67.000

23 Side height 55 GR-Magic mesh cable tray Width GRM 55 50VA40 GRM 55 00VA40 GRM 55 50VA40 GRM 55 0VA40 GRM 55 00VA40 GRM VA40 GRM VA40 GRM VA40 GRM 55 50VA440 GRM 55 00VA440 GRM 55 50VA440 GRM 55 0VA440 GRM 55 00VA440 GRM VA440 GRM VA440 GRM VA440 Wire V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 GB Stained m kg/00 m No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00 (exception: GRM 55/50 = x 00 ). Mesh cable tray with shaped connector of side height 55. GRM 55 50VA40 GRM 55 00VA40 GRM 55 50VA40 GRM 55 0VA40 GRM 55 00VA40 GRM VA40 GRM VA40 GRM VA40 Length B Useful crosssection cm² Dimensions 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GRM 55 50VA40 GRM 55 00VA40 GRM 55 50VA40 GRM 55 0VA40 GRM 55 00VA40 GRM VA40 GRM VA40 GRM VA40.0 m.5 m 2.0 m 2.5 m Load diagram, mesh cable tray GRM 55 VA Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Load 2

Side height 55 GR-Magic mesh cable tray with barrier strip Length GRM-T 55 00 G GRM-T 55 0 G GRM-T 55 00 G GRM-T 55 400 G GRM-T 55 500 G St Steel G Electrogalvanised Wire 000.9 000.9 000 4.8 000 4.

The grid width is 50 x 00. Mesh cable tray with shaped connector and welded barrier strips of side height 55.

24 Side height 55 GR-Magic mesh cable tray with barrier strip Length GRM-T G GRM-T 55 0 G GRM-T G GRM-T G GRM-T G St Steel G Electrogalvanised Wire m kg/00 m No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00. Mesh cable tray with shaped connector and welded barrier strips of side height 55. Dimensions GRM-T G GRM-T 55 0 G GRM-T G GRM-T G GRM-T G Length B Wire Useful crosssection cm² Load 24 GRM-T G GRM-T 55 0 G GRM-T G GRM-T G GRM-T G.0 m.5 m 2.0 m Load diagram, GR-Magic mesh cable tray, type GRM-T 55 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

Side height 55 GR-Magic mesh cable tray with barrier strip Length Wire m kg/00 m GRM-2T 55 0 G 000.9 88.0 600695 GRM-2T 55 00 G 000 4.8 282.700 600696 GRM-2T 55 400 G 000 4.8 6.

25 Side height 55 GR-Magic mesh cable tray with barrier strip Length Wire m kg/00 m GRM-2T 55 0 G GRM-2T G GRM-2T G GRM-2T G St Steel G Electrogalvanised No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00. Mesh cable tray with shaped connector and two welded barrier strips of side height 55. GRM-2T 55 0 G GRM-2T G GRM-2T G GRM-2T G Length B Wire Useful crosssection cm² Dimensions 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GRM-2T 55 0 G GRM-2T G GRM-2T G GRM-2T G.0 m.5 m 2.0 m Load diagram, GR-Magic mesh cable tray, type GRM-2T 55 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Load

26 Side height 55 Barrier strip TSG 45 FS St Steel Plate H thickness L V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 Ti FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Barrier strip for separation of cables of different voltages or functions. m kg/00 m TSG 45 DD TSG 45 VA TSG 45 VA Barrier strip connector TSGV VA40 0 kg/ V2A Stainless steel, grade 0 Barrier strip connector for screwless connection of the TSG barrier strip in all side heights Hold-down clamp for barrier strip fastening KS GR VA40 V2A Stainless steel, grade 0 Hold-down clamp for fastening barrier strips in mesh cable trays. 0 kg/ Hold-down clamp for barrier strip fastening GKT 8 G kg/ GKT 8 FT GKT 8 VA GKT 8 VA St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Clamp for fastening barrier strip in mesh cable trays. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 26

27 Side height mesh cable tray bend GRB G GRB G GRB 90 5 G GRB G GRB G GRB G GRB G GRB FT GRB FT GRB 90 5 FT GRB FT GRB FT GRB FT GRB FT St Steel G Width Wire Electrogalvanised FT Hot-dip galvanised 90 bend, horizontal, for all mesh cable trays of 55 side height. kg/ KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 27

28 Side height 05 GR-Magic mesh cable tray GRM G GRM G GRM 05 0 G GRM G GRM G GRM G GRM G GRM G GRM FT GRM FT GRM 05 0 FT GRM FT GRM FT GRM FT GRM FT GRM FT St Steel G Length Wire Electrogalvanised FT Hot-dip galvanised m No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00. Mesh cable tray with shaped connector of side height 05. kg/00 m Dimensions GRM G GRM G GRM 05 0 G GRM G GRM G GRM G GRM G GRM G Length B Wire Useful crosssection cm² Load 28 GRM G GRM G GRM 05 0 G GRM G GRM G GRM G GRM G GRM G.0 m.5 m 2.0 m.0 m Load diagram, mesh cable tray, type GRM 05 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

29 Side height 05 GR-Magic mesh cable tray Width GRM05 00VA40 GRM05 50VA40 GRM05 0VA40 GRM05 00VA40 GRM05 400VA40 GRM05 500VA40 GRM05 600VA40 GRM05 00VA440 GRM05 50VA440 GRM05 0VA440 GRM05 00VA440 GRM05 400VA440 GRM05 500VA440 GRM05 600VA440 Wire V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 GB Stained m kg/00 m No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is 50 x 00. Mesh cable tray with shaped connector of side height 05. GRM05 00VA40 GRM05 50VA40 GRM05 0VA40 GRM05 00VA40 GRM05 400VA40 GRM05 500VA40 GRM05 600VA40 Length B Useful crosssection cm² Dimensions 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GRM05 00VA40 GRM05 50VA40 GRM05 0VA40 GRM05 00VA40 GRM05 400VA40 GRM05 500VA40 GRM05 600VA40.0 m.5 m 2.0 m.0 m Load diagram, mesh cable tray, type GRM 05 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Load 29

30 Side height 05 Barrier strip TSG 85 FS Plate H thickness L St Steel V2A Stainless steel, grade 04 FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Barrier strip for separation of cables of different voltages or functions. m kg/00 m TSG 85 DD TSG 85 VA Barrier strip connector TSGV VA40 0 kg/ V2A Stainless steel, grade 0 Barrier strip connector for screwless connection of the TSG barrier strip in all side heights Hold-down clamp for barrier strip fastening KS GR VA40 V2A Stainless steel, grade 0 Hold-down clamp for fastening barrier strips in mesh cable trays. 0 kg/ Hold-down clamp for barrier strip fastening GKT 8 G kg/ GKT 8 FT GKT 8 VA GKT 8 VA St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Clamp for fastening barrier strip in mesh cable trays. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 0

31 Side height mesh cable tray bend GRB 90 0 G GRB 90 5 G GRB 90 G GRB 90 0 G GRB G GRB G GRB G GRB G GRB 90 0 FT GRB 90 5 FT GRB 90 FT GRB 90 0 FT GRB FT GRB FT GRB FT GRB FT St Steel G Width Wire Electrogalvanised FT Hot-dip galvanised 90 bend, horizontal, for all mesh cable trays of 05 side height. kg/ KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

32 Accessories for side height 5, 55, 05 Joint connector 4 28 GSV 4 G GSV 4 FT GSV 4 VA GSV 4 VA St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Screwed version of joint connector for mesh cable trays. Figure: Positioning and quantity of mesh cable tray connectors = 2 units 0-00 = units = 4 units = 5 units kg/ Quick connector GRS.9 DD GRS 4.8 DD kg/ St Steel DD Strip galvanised zinc/aluminium, Double Dip When selecting the connector, please take the appropriate wire thickness of the mesh cable tray into account. Quick connector for screwless straight connection of mesh cable trays without special tools, for mesh cable trays up to a width of 50. Figure: Positioning and quantity of mesh cable tray connectors = 2 units Mesh cable tray connector, long GRV 245 FS Width 245 kg/ GRV 245 DD GRV 245 VA St Steel V4A Stainless steel, grade 6 L FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Two straight connectors, type GRV 245, are used for each connection point. Can be used from a mesh cable tray width of 00. Long mesh cable tray connectors for screwless straight connection of mesh cable trays. Side connector K 262 FT kg/ K 262 VA St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Including screw of type FRS M6 x. Screwed version of joint connector for mesh cable trays. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 2

33 t b d Accessories for side height 5, 55, 05 Corner connector GEV 6 G GEV 6 FT GEV 6 VA GEV 6 VA St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised Including FRS M6 x 2 bolt with flange nut Corner connector for the creation of mesh cable tray bend elements. kg/ Slotted steel strap Dimension 5050 X FT 5050 X M FT Hole size Length x 6,5 x x 6,5 x kg/ e 5 St Steel FT Hot-dip galvanised Perforated slotted steel strap in strips. Slotted steel strap, bent Dimension 5050 X FT x St Steel FT Hot-dip galvanised Set includes four clamps, type GKS 4. Bent slotted steel strap for creation of bends and tees. kg/ Hold-down clamp 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GKS 4 G kg/ GKS 4 FT GKS 4 VA GKS 4 VA St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Clamp for fixing mesh cable trays to wall or support brackets. GKB 4 G kg/ GKB 4 VA St Steel V2A Stainless steel, grade 04 G Electrogalvanised Clamp for fastening mesh cable trays of width 50 to the floor Hold-down clamp

34 Accessories for side height 5, 55, 05 Hold-down clamp 24 7 GKB 8 G kg/ GKB 8 VA St Steel V2A Stainless steel, grade 04 G Electrogalvanised Hold-down clamp for floor fastening of mesh cable trays. Hold-down clamp GKS FS GKS 50 FS GKS FT GKS 50 FT GKS V4A GKS 50 V4A Hole St Steel V4A Stainless steel, grade 6 L FS Strip-galvanised FT Hot-dip galvanised Clamp for fastening mesh cable trays kg/ Earthing clip 99 Shipping box 50 kg/ St Steel G Electrogalvanised For cables to 6 ² and flat conductors Fit: cable to 6 ² x max. FL 0 With riveted brass connection terminal and one cylinder bolt, M5 x 2, with two cylinder bolts, M6 x 6 Connection and earthing terminal 48 M6 0 VEK-GRM.9 FS VEK-GRM 4.8 FS kg/ St Steel FS Strip-galvanised The connection and earthing terminal is used to reduce electrical resistance and therefore improves the electric conductivity in mesh cable systems in the area of the joint allowing to fulfil the high demands in terms of the transition resistance according to e.g. NEMA and CSA. Furthermore, the connection and earthing terminal is compulsory when used as a protective conductor in a mesh cable tray system (Note: National regulations have to be followed when creating such a system). 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 4

35 Accessories for side height 5, 55, 05 EKL M6 EKL 5 M6 CuZn Brass L l Cross section SW ² Thread Accessories M M Earthing terminal for fastening the equipotential bonding wire to the cable support system. kg/ Earthing screw Hole 0 SH KAB FS 6054 SH KAB FS St Steel FS Strip-galvanised Conduit take off bracket with perforation for accepting cable glands. KAB GR FS 0 Side holder for cable gland kg/ kg/ KAB GR FT KAB GR VA St Steel V2A Stainless steel, grade 04 FS Strip-galvanised FT Hot-dip galvanised The drop-out plate allows compliance with specific bend radii (fibre-optic cables), thus preventing possible cable breaks. Can be mounted in a lengthwise direction and at the side, can be arranged for greater widths. Drop-out plate Mounting plate 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Height Width 40 kg/ MP UNI FS MP UNI DD MP UNI VA St Steel V2A Stainless steel, grade 04 FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Mounting plate, for fastening on the side rail of cable support systems. 5

36 Accessories for side height 5, 55, 05 Fastening element for mesh cable tray Identification clip BE TS GR PC Polycarbonate 0 kg/ The fastening element BE TS GR can be used to attach OBO junction boxes, type T60 and T00, to all standard mesh cable trays in a few actions, quickly and without tools. This is all done without using tools. This keeps the junction box securely in position. However, it can be quickly dismantled as necessary. KS GR OR KS GR ZGB KS GR LBL KS GR SGN Colour kg/00. Pastel orange Zinc yellow Light blue Signal green PA Polyamide The identification clip is fastened to the mesh cable tray without screws simply by attaching it. Bolt cutter Length GR BS 450 St Steel Bolt cutter for cutting mesh cable trays. kg/ End cap Colour GR KS.9 OR Pure orange GR KS 4.8 OR Pure orange PVC Polyvinylchloride 5 End cap to cover cut wire ends of mesh cable trays kg/ KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 6

37 Accessories for side height 5, 55, 05 Cover, unperforated DRLU 050 FS DRLU 00 FS DRLU 50 FS DRLU 0 FS DRLU 00 FS DRLU 400 FS DRLU 500 FS DRLU 600 FS DRLU 050 DD DRLU 00 DD DRLU 50 DD DRLU 0 DD DRLU 00 DD DRLU 400 DD DRLU 500 DD DRLU 600 DD DRLU 050 VA40 DRLU 00 VA40 DRLU 50 VA40 DRLU 0 VA40 DRLU 00 VA40 DRLU 400 VA40 DRLU 500 VA40 DRLU 600 VA40 DRLU 050 VA457 DRLU 00 VA457 DRLU 50 VA457 DRLU 0 VA457 DRLU 00 VA457 DRLU 400 VA457 DRLU 500 VA457 DRLU 600 VA457 Width Plate thickness Length St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 Ti FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip m Transverse bead from 500 width. Cover for cable trays and mesh cable trays. When using covers outdoors, additional measures against the influence of wind must be taken. kg/00 m B+4 Cover clamp, universal DKU VA40 kg/ KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 V2A Stainless steel, grade 0 Depending on the tray width, 4 6 cover clamps are required for secure fastening of a m cover. Cover clamp for universal fastening of covers on cable trays, mesh cable trays and AZ channels. The cover clamp is not suitable for use with mesh cable trays with a side height of

38 Mounting systems Wall mounting for type GRM 5x50 8, WH GRM5 FT St Steel V4A Stainless steel, grade 6 FT Hot-dip galvanised Side height Width 5 50 Wall mounting for wall fastening of mesh cable trays, type GRM 5x50 0 kg/ WH GRM5 VA Wall clamp/central hanger K 2 88 FS K2 88 VA St Steel V2A Stainless steel, grade 04 FS Strip-galvanised Recoendation: As wall mounting up to max. mesh cable tray width 0. As centre suspension up to max. mesh cable tray width 0. As a trapeze suspension from a width of 00. Wall clamp and central hanger for mesh cable trays. kg/ Mounting plate MPG 65 FT MPG 90 FT MPG 65 VA4404 MPG 90 VA4404 A B Dimension x Dimension y St Steel V4A Stainless steel, grade 6 L FT Hot-dip galvanised Mounting plate for screwless wall fastening of mesh cable trays kg/ KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 8

Mounting systems TPSAG 45 FS TPSAG 95 FS TPSAG 245 FS TPSAG 45 FS TPSAG 45 FT TPSAG 95 FT TPSAG 245 FT TPSAG 45 FT TPSAG 45 VA40 TPSAG 95 VA40 TPSAG 245 VA40 TPSAG 45 VA40 For width F in kn kn 00.

39 Mounting systems TPSAG 45 FS TPSAG 95 FS TPSAG 245 FS TPSAG 45 FS TPSAG 45 FT TPSAG 95 FT TPSAG 245 FT TPSAG 45 FT TPSAG 45 VA40 TPSAG 95 VA40 TPSAG 245 VA40 TPSAG 45 VA40 For width F in kn kn St Steel V2A Stainless steel, grade 04 FS Strip-galvanised FT Hot-dip galvanised TP support / wall and support bracket kg/ If the bracket is fastened directly to the wall or the profiles are screwed together, then, for reasons of stability, always use the spacer, type DS 4. TP bracket with clamping lugs for screwless mesh cable tray fastening. TPSAG 45 FS TPSAG 95 FS TPSAG 245 FS TPSAG 45 FS B L Dimensions Load diagram, bracket TPSAG Bending of the bracket tip at permitted bracket load Permitted bracket load in kn without man load Load curve with bracket lengths in Load Characteristic anchor load values for TP bracket Wall fastening Max. load F [kn] Bracket width [] Anchor type BZ-U 8-0-4/95,00 0,80 0,70 0,50 BZ-U /0,50,00 0,90 0,55 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Max. total load F = cable weight + cable tray + bracket. The load capacity values increase considerably when used in uncracked concrete. The values given are based on concrete of strength class C/. Observe the installation conditions of the DIBt approval (anchors). 9

40 Mounting systems Wall and support bracket MWAG 2 Width MWAG 2 FS MWAG 2 2 FS MWAG 2 FS MWAG 2 4 FS St Steel FS Strip-galvanised F in kn kn Including truss-head bolt M0 x for fastening to U supports. Light-duty wall and support bracket for screwless mesh cable tray fastening. kg/ Dimensions MWAG 2 FS MWAG 2 2 FS MWAG 2 FS MWAG 2 4 FS B A H Hole Load Load diagram, bracket type MWAG 2 Bending of the bracket tip at permitted bracket load Permitted bracket load in kn without man load Load curve with bracket lengths in Characteristic anchor load values for wall and support bracket MWAG 2 Wall fastening Max. load F [kn] Bracket width [] Anchor type BZ-U 8-0-2/75, 0,95 0,70 0,65 BZ-U 0-0-0/90,,,, Max. total load F = cable weight + cable tray + bracket. The load capacity values increase considerably when used in uncracked concrete. The values given are based on concrete of strength class C/. Observe the installation conditions of the DIBt approval (anchors). Load values for MWAG 2 on suspended support Max. total load F in kn Support US K/ - 60 US K/ 70 - US 5 K/ - 60 US 5 K/ 70 - Bracket length in ,,,,,,,,,,,,,,,, 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 40

41 Mounting systems AW G 5 FT AW G 5 6 FT AW G 5 2 FT AW G 5 FT AW G 5 4 FT AW G 5 5 FT AW G 5 6 FT AWG 5 VA40 AWG 5 2 VA40 AWG 5 VA40 AWG 5 4 VA40 AWG 5 5 VA40 AWG 5 6 VA40 AWG 5 VA457 AWG 5 2 VA457 AWG 5 VA457 AWG 5 4 VA457 AWG 5 5 VA457 AWG 5 6 VA457 St Steel GB Stained Width F in kn kn Wall and support bracket AWG kg/ V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 Ti FT Hot-dip galvanised Fastening of the bracket to the U support of width 400 or greater using hexagonal bolt through both sides of the support. Please insert suitable spacers. Light-duty wall and support bracket with welded head plate for screwless mesh cable tray fastening. AW G 5 FT AW G 5 6 FT AW G 5 2 FT AW G 5 FT AW G 5 4 FT AW G 5 5 FT AW G 5 6 FT B A H Hole Dimensions Load diagram, bracket type AW G 5 Bending of the bracket tip at permitted bracket load Permitted bracket load in kn without man load Load curve with bracket lengths in Load 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Characteristic anchor load values for wall and support bracket AW G 5 Wall fastening Max. load F [kn] Bracket width [] Anchor type BZ-U 8-0-2/75,0 0,90 0,80 0,65 0,55 0,50 0,45 0,45 BZ-U 0-0-0/90,50,50,40,0 0,95 0,85 0,80 0,80 Max. total load F = cable weight + cable tray + bracket. The load capacity values increase considerably when used in uncracked concrete. The values given are based on concrete of strength class C/. Observe the installation conditions of the DIBt approval (anchors). Support US K/ - 60 US K/ 70 - US 5 K/ - 60 US 5 K/ 70 - Max. total load F in kn Bracket length in ,50,50,0,0,50,50,0,0,50,50,50,50,50,50,40,50 4

42 Mounting systems Threaded rod 78 M6 M G 78 M8 M G 78 M0 M G 78 M2 M G 78 M6 2M G 78 M8 2M G 78 M0 2M G 78 M2 2M G 78 M6 M V2A 78 M8 M V2A 78 M0 M V2A 78 M2 M V2A 78 M6 2M V2A 78 M8 2M V2A 78 M0 2M V2A 78 M2 2M V2A 78 M6 M V4A 78 M8 M V4A 78 M0 M V4A 78 M2 M V4A 78 M6 2M V4A 78 M8 2M V4A 78 M0 2M V4A 78 M2 2M V4A St Steel G Electrogalvanised Threaded rod to DIN 976. d L Thread M M M M M M M M M M M M M M M M M M M M M M M M V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 Ti kg/ Side holder Side holder, universal For threaded rod 50 kg/ SH M0 FS M SH M0 FT M SH M0 A4 M St Steel V4A Stainless steel, grade 6 FS Strip-galvanised FT Hot-dip galvanised Side holder for suspension of mesh cable trays. SHU M2 FS 50 kg/ SHU M2 DD SHU M2 VA SHU M2 VA St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 Ti FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Side holder to fasten cable trays, mesh cable trays and cable ladders to ceilings using a threaded rod. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 42

43 Mounting systems Centre suspension GMA M6 FS GMA M8 FS GMA M0 FS GMA M6 FT GMA M8 FT GMA M0 FT GMA M6 VA440 GMA M8 VA440 GMA M0 VA440 Hole St Steel V4A Stainless steel, grade 6 FS Strip-galvanised FT Hot-dip galvanised kg/ When filling with cables, please ensure an even distribution. The maximum recoended mesh cable tray width is 0. Two-part centre suspension of mesh cable trays GMS 70 FS GMS 270 FS GMS 70 FS GMS 470 FS GMS 570 FS GMS 70 VA4404 GMS 270 VA4404 GMS 70 VA4404 GMS 470 VA4404 GMS 570 VA4404 B St Steel V4A Stainless steel, grade 6 L FS Strip-galvanised Centre suspension including hold-down clamp for mesh cable tray suspensions. 0 0 kg/ Centre suspension b Version kg/00. BC GR 4.8 VA 7 For wire thicknesses.9 and V2A Stainless steel, grade 0 Hold-down clip for the screwless mounting of mesh cable trays onto MS profile rails. Hold-down clip 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 4

Mounting systems TP wall and ceiling bracket TPDG 45 FS TPDG 95 FS TPDG 245 FS TPDG 45 FS TPDG 45 FT TPDG 245 FT TPDG 45 FT TPDG 45 VA40 TPDG 95 VA40 TPDG 245 VA40 TPDG 45 VA40 For width F in kn

5.000 9.00 68.000 8.000 665906 66594 665922 665949 665977 66598 665985 665989 66599 66599 665995 Important!

44 Mounting systems TP wall and ceiling bracket TPDG 45 FS TPDG 95 FS TPDG 245 FS TPDG 45 FS TPDG 45 FT TPDG 245 FT TPDG 45 FT TPDG 45 VA40 TPDG 95 VA40 TPDG 245 VA40 TPDG 45 VA40 For width F in kn ceiling kn St Steel V2A Stainless steel, grade 04 FS Strip-galvanised FT Hot-dip galvanised F in kn Wall kn kg/ Important! If the ceiling bracket is fastened directly to the wall or ceiling, then, for reasons of stability, always use the spacer, type DS 4. Max. side height of the cable support system 60. TP wall and ceiling bracket with clamping lugs for screwless mesh cable tray fastening Dimensions TPDG 45 FS TPDG 95 FS TPDG 245 FS TPDG 45 FS B L Load TP profile Load diagram, ceiling bracket TPDG Bending of the bracket tip at permitted bracket load Permitted bracket load in kn without man load Load curve with bracket lengths in Characteristic anchor load values for TPDG wall and ceiling bracket Wall fastening Max. load F [kn] Bracket length [] Anchor type BZ-U 8-0-4/95,00 0,70 0,50 0,40 0,0 BZ-U /0,50 0,90 0,55 0,45 0,5 Anchor type BZ-U 8-0-4/95 BZ-U /0 Ceiling fastening Max. load F [kn] Bracket width [] ,0 0,80 0,50 0,5 0,,0 0,80 0,50 0,5 0, Max. total load F = cable weight + cable tray + ceiling bracket. The load capacity values increase considerably when used in uncracked concrete. The values given are based on concrete of strength class C/. Length kg/00. TPSG 000 FS TPSG 000 FT St Steel FS Strip-galvanised FT Hot-dip galvanised TP profile with clamping lugs. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 44

45 Mounting systems End cap Colour TPS KS OR Pastel orange PE Polyethylene End cap to cover ends of TP supports. 0 kg/ Spacer DS 4 FS kg/ DS 4 FT DS 4 VA St Steel V2A Stainless steel, grade 04 FS Strip-galvanised FT Hot-dip galvanised For static reasons, the spacer is always used to prevent the profile from deforming when the fastening bolts are tightened. Spacer for use in profiles, type TP. Dimension 50 kg/ FRS 0x TPS F M 0 x FRS 0x TPS A2 M 0 x St Steel V2A Stainless steel, A2 F Hot-dip galvanised Truss-head bolt with square neck. With washer and hexagonal nut. Truss-head bolt Hexagonal bolt L d SKS 0x60 F Dimension M 0 x SW 7 St Steel F Hot-dip galvanised Hexagonal bolt for universal fixing of structure components. kg/ KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 45

46 Mounting systems Stand-off bracket B+6 B DBLG 050 FS DBLG 00 FS DBLG 50 FS DBLG 0 FS DBLG 00 FS DBLG 400 FS DBLG 500 FS DBLG 600 FS DBLG 050 FT DBLG 00 FT DBLG 50 FT DBLG 0 FT DBLG 00 FT DBLG 400 FT DBLG 500 FT DBLG 600 FT B kg/ x 5 St Steel FS Strip-galvanised FT Hot-dip galvanised Screwless fastening of the mesh cable tray on the stand-off bracket. Stand-off bracket for stand-off of mesh cable trays on the floor or on the wall. Tray fastening system set 0 kg with TrayFix large TrayFix-0-L From tray width 00 kg/00., Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO cable tray systems MKSM, SKSM and IKSM Adapted to OBO mesh cable tray systems with a minimum width of 00 Set consisting of TrayFix mounting adapter and concrete block including base for FangFix-System 0 kg Tray fastening system set 0 kg with TrayFix small TrayFix-0-S From tray width 00 kg/00., Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO mesh cable systems with a minimum width of 00 Set consisting of clamping piece, fastening plug and concrete block including base for FangFix- System 0 kg Tray fastening system set 6 kg with TrayFix large TrayFix-6-L From tray width 00 kg/00., Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO cable tray systems MKSM, SKSM and IKSM Adapted to OBO mesh cable tray systems with a minimum width of 00 Set consisting of TrayFix mounting adapter and concrete block including base for FangFix-System 6 kg 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 46

47 Mounting systems TrayFix-6-S From tray width 00 Tray fastening system set 6 kg with TrayFix small kg/00., Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO mesh cable systems with a minimum width of 00 Set consisting of clamping piece, fastening plug and concrete block including base for FangFix- System 6 kg Mesh angle Wire GW FT Length m 50 kg/00 m St Steel FT Hot-dip galvanised 0 00 Mesh angle for routing cables in steel girders. Beam clamp KL FT KL 0 FT Height kg/ St Steel FT Hot-dip galvanised When selecting the beam clamp, please take the flange thickness of the steel girder into account. Beam clamp for fastening the mesh angle, type GW 40/80 to steel girders. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 47

48 G mesh cable tray Magic G mesh cable tray Magic, side height 50 G-GRM G St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Side Wire height 50.9 Electrogalvanised FT Hot-dip galvanised m kg/00 m G-GRM FT G-GRM 50 50V2A G-GRM 50 50V4A G-shaped mesh cable tray made of spot-welded steel wire with different side heights and widths. Direct wall or ceiling mounting possible. Load capacity details regarding the different mounting methods are available upon request. Dimensions G-GRM G B H C A Wire Length Load G-GRM 50/50 Support spacing [m] Load [] Fastening variant Wall fastening K Ceiling fastening K Hook rail for G mesh cable tray Length Width Side height kg/ G-GRM-R50 FS G-GRM-R50VA St Steel V2A Stainless steel, grade 04 FS Strip-galvanised 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 48

49 G mesh cable tray Magic G-GRM G Side Wire height 75.9 G mesh cable tray Magic, side height 75 m kg/00 m G-GRM FT G-GRM 75 50V2A G-GRM 75 50V4A St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised G-shaped mesh cable tray made of spot-welded steel wire with different side heights and widths. Direct wall or ceiling mounting possible. Load capacity details regarding the different mounting methods are available upon request. Magnetic shield insulation 5 db. G-GRM G B H C A Wire Length Dimensions G-GRM 75/50 Support spacing [m] Load [] Fastening variant Bracket MWAG Wall fastening K Ceiling fastening K Load Hook rail for G mesh cable tray 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Length Width Side height kg/ G-GRM-R75 FS G-GRM-R75VA St Steel V2A Stainless steel, grade 04 FS Strip-galvanised 49

50 G mesh cable tray Magic G mesh cable tray Magic, side height G-GRM 75 G St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Side Wire height.9 Electrogalvanised FT Hot-dip galvanised m kg/00 m G-GRM 75 FT G-GRM 75V2A G-GRM 75V4A G-shaped mesh cable tray made of spot-welded steel wire with different side heights and widths. Direct wall or ceiling mounting possible. Load capacity details regarding the different mounting methods are available upon request. Magnetic shield insulation 5 db. Dimensions G-GRM 75 G B H C A Wire Length Load G-GRM /75 Support spacing [m] Load [] Fastening variant Bracket MWAG Wall fastening K Ceiling fastening K Hook rail for G mesh cable tray Length Width Side height kg/ G-GRM-R FS G-GRM-RVA St Steel V2A Stainless steel, grade 04 FS Strip-galvanised 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 50

G mesh cable tray Magic G-GRM 50 00 G Side Wire height 50.9 G mesh cable tray Magic, side height 50 m kg/00 m 28.000 6005544 G-GRM 50 00 FT 50.9 0.900 6005529 G-GRM 50 00V2A 50.9 28.

000 6005574 St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised G-shaped mesh cable tray made of spot-welded steel wire with different side

51 G mesh cable tray Magic G-GRM G Side Wire height 50.9 G mesh cable tray Magic, side height 50 m kg/00 m G-GRM FT G-GRM 50 00V2A G-GRM 50 00V4A St Steel V2A Stainless steel, grade 04 V4A Stainless steel, grade 6 G Electrogalvanised FT Hot-dip galvanised G-shaped mesh cable tray made of spot-welded steel wire with different side heights and widths. Direct wall or ceiling mounting possible. Load capacity details regarding the different mounting methods are available upon request. Magnetic shield insulation 5 db. G-GRM G B H C A Wire Length Dimensions G-GRM 50/00 Support spacing [m] Load [] Fastening variant Bracket MWAG Wall fastening K Ceiling fastening K Load Hook rail for G mesh cable tray 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 Length Width Side height kg/ G-GRM-R50 FS G-GRM-R50VA St Steel V2A Stainless steel, grade 04 FS Strip-galvanised 5

C mesh cable tray C mesh cable tray CGR Dimensions CGR 50 50 FT CGR 50 00 FT CGR 50 0 FT CGR 50 00 FT CGR 50 400 FT CGR 50 50 VA40 CGR 50 00VA40 CGR 50 0VA40 CGR 50 00VA40 CGR 50 400VA40 St Steel V2A

CGR 50 50 FT CGR 50 00 FT CGR 50 0 FT CGR 50 00 FT CGR 50 400 FT Length Side height Width Wire 50 4.5 50 4.5 50 4.5 50 4.5 50 4.5 50 4.5 50 4.5 50 4.5 50 4.5 50 4.5 Wire Useful crosssection cm² 000 50 4.

52 C mesh cable tray C mesh cable tray CGR Dimensions CGR FT CGR FT CGR 50 0 FT CGR FT CGR FT CGR VA40 CGR 50 00VA40 CGR 50 0VA40 CGR 50 00VA40 CGR VA40 St Steel V2A Stainless steel, grade 04 GB Stained FT Hot-dip galvanised C-shaped mesh cable tray made of spot-welded steel wire of side height 50. CGR FT CGR FT CGR 50 0 FT CGR FT CGR FT Length Side height Width Wire Wire Useful crosssection cm² m kg/00 m Load 52 CGR FT CGR FT CGR 50 0 FT CGR FT CGR FT.0 m.5 m 2.0 m Load diagram, C mesh cable tray, type CGR 50 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7

53 C mesh cable tray TSG 0 DD Plate H thickness L St Steel V2A Stainless steel, grade 04 DD Strip galvanised zinc/aluminium, Double Dip Barrier strip for separation of cables of different voltages or functions. m kg/00 m Barrier strip TSG 0 VA TSGV VA40 0 kg/ V2A Stainless steel, grade 0 Barrier strip connector for screwless connection of the TSG barrier strip in all side heights. Barrier strip connector Hold-down clamp for barrier strip fastening KS GR VA40 V2A Stainless steel, grade 0 Hold-down clamp for fastening barrier strips in mesh cable trays. 0 kg/ Hold-down clamp for barrier strip fastening 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 GKT 8 FT kg/ GKT 8 VA St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Clamp for fastening barrier strip in mesh cable trays

54 C mesh cable tray Joint connector 4 28 GSV 4 FT GSV 4 VA St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Screwed version of joint connector for mesh cable trays. Figure: Positioning and quantity of mesh cable tray connectors = 2 units 0-00 = units = 4 units = 5 units kg/ mounting angle 0 78 MW 45 SL0 FT kg/ MW 45 SL0VA St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Each with two clamps of type KS 2/5. 45 installation profile, vertical, for C mesh cable tray and GR-Magic mesh cable tray with a side height of mounting angle MW 90 SL7 FT MW 90 SL2 FT MW 90 SL7VA40 MW 90 SL2VA40 kg/ St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Each with two clamps of type KS 2/5. 90 installation profile, vertical, for C mesh cable tray and GR-Magic mesh cable tray with a side height of Hold-down clamp M Hold-down clamp 22 4 KS 2 5 FT 00 kg/ KS 2 5 VA St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Including M6 locknut. Clamp for mounting bracket, type MW 45 and MW 90. GKS 4 FT kg/ GKS 4 VA St Steel V2A Stainless steel, grade 04 FT Hot-dip galvanised Including FRS M6 x bolt with flange nut. Clamp for fixing mesh cable trays to wall or support brackets. 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 54

55 C mesh cable tray Hook screw Thread HS M6x A2 M6 V2A Stainless steel, A2 Hook screw for fastening cable tracks on the bracket. 00 kg/ Flange nut d h SW Resistance class KM M6 A A2-70 V2A Stainless steel, A2 Combination nut with washer based on EN kg/ KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 55

Side height 55 Mesh cable tray GR Length GR 55 00 G GR 55 450 G GR 55 500 G GR 55 600 G St Steel G Electrogalvanised Wire 000 6 000 6 000 6 000 6 The grid width is 50 x 00.

40 60068 600684 600685 600687 Dimensions GR 55 00 G GR 55 450 G GR 55 500 G GR 55 600 G Length B Wire Useful crosssection cm² 000 00 6 48 000 450 6 66 000 500 6 78 000 600 6 888 Load GR 55 00 G.5 m 2.

56 Side height 55 Mesh cable tray GR Length GR G GR G GR G GR G St Steel G Electrogalvanised Wire The grid width is 50 x 00. Mesh cable tray made of spot-welded steel wire of side height 55. Magnetic shield insulation without cover 5 db, with cover db. m kg/00 m Dimensions GR G GR G GR G GR G Length B Wire Useful crosssection cm² Load GR G.5 m 2.0 m.8.0 m GR G.8 GR G.8 GR G.56.5 Permitted cable tray/ladder load in without man load Support width in m Rail bend in at permitted Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS Broschüre Gitterrinnen 7 / en / 0/08/7 (LLExport_04607) / 0/08/7 56

We are Chalfant. We are OBO. We are One.

RKS-Magic We are Chalfant. We are OBO. We are One. chalfant-obo.com Chalfant Manufacturing Company Chalfant Manufacturing has more than seventy years of experience designing and producing quality cable