Bol FEATURES: SPECIFICATIONS: 8' 24' Round Tapered and Straight Wood Poles STRUCTURA INC. FIXTURE TYPE: PROJECT NAME:

Aura FEATURES: SPECIFICATIONS: Illuminated Wooden Linear Pendant STRUCTURA INC. FIXTURE TYPE: PROJECT NAME:

Illuminated Wooden Linear Pendant FIXTURE TYPE: PROJECT NAME: Solid wood exterior/interior LE linear pendant. FEATURES: Available in to 1 lengths Smooth, dot free illumination immable IP5 power supply

SECTION STEEL LIGHTING STANDARDS. 1. Electrical conduit and fittings; Section

02760-1 of 5 SECTION 02760 STEEL LIGHTING STANDARDS 02760.01 GENERAL A. Description Steel lighting standards shall include, but not necessarily be limited to, furnishing and installing steel lighting poles,

ROUND STEEL POLE STRAIGHT

PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 7 ROUND STEEL POLE SPECIFICATIONS: Pole Shaft The pole shaft is fabricated from hot rolled steel tubing of onepiece construction with a

HSAF Era Stepped Aluminum Fluted Pole revision 10/6/15 kl_hasf_spec.pdf

Type: Job: Catalog number: Approvals: / / / / / / Pole Cat. No. Mounting Arm Drilling Pole Finish Optional Optional Pole Optional Duplex Option Base Cove Top Cap/Finial Receptical Specifications Conduit

Square Straight Steel - 4 Bolt Base Light Poles

Quick Ship Square Bronze over Galvanized Straight Steel Pole - 4 Bolt Base Square Straight Steel - 4 Bolt Base Light Poles Optional Tenon Mounting (specify) "D" Top Diameter Arm Drilling Per Customer Specs.

Project: Type: Qty: QH2L. Series Optics Mounting Light Engine CCT Finish Voltage Option. Options QH2L 27 3 /8" 23 3 /16" 3 1 /2" O.D. Pole.

Series Optics Mounting Light Engine CCT Finish Voltage QHL Quadro H LED R R R3 R4 R5 Type I Type II Type III Type IV Type V Project: Type: Qty: QHL _ Series Optics Mounting Light Engine CCT Finish Voltage

Brackets and Tenons. Product Specifications. PB Series XA-TMDA8

Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation

Single 180 Double 180 Triple. 180 Quad

Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation

Brackets and Tenons. Product Specifications. PB Series

Brackets and Tenons Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion,

A. Product Data: For each electrical identification product indicated.

SECTION 16075 - ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

SQUARE STEEL POLE STRAIGHT

PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 8 SQUARE STEEL POLE SPECIFICATIONS: Pole Shaft The pole shaft is fabricated from hot rolled steel tubing of onepiece construction with

MAST ARMS & POLES. Ornamental Pole Top & Bases

Ornamental Pole Top & Bases Pelco s decorative pole top and bases make the traffic signal aesthetically pleasing to the eye. In addition to the standar 4-piece, Pelco also manufactures the bases with an

EML17 LED. Munich Pendant. Ordering Guide: EML17 LED

EML17 LED Munich Pendant CATALOG # Project Type This European shaped pendant or wall mount luminaire consists of a driver housing and skirt with an internal light engine with a choice of two lens options.

B. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.

SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.

5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.

2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc

A. Deviation from this standard must be approved by the Project Architect.

September 2012, rev. 00 26 5600 Exterior Lighting PART 1. GENERAL 1.01 Related Documents A. Deviation from this standard must be approved by the Project Architect. B. Drawings and general provisions of

5G350 Nominal 33W 5G530 Nominal 48W 5G700 Nominal 64W 5G105 Nominal 97W 5G140 Nominal 126W K K. 1 DM or HL only. Cannot be combined.

Project: Type: Qty: BLL _ Series Mounting Optics Light Engine CCT Finish Voltage Options _ Pole Series Height Finish Pole Options Series Mounting Optics Light Engine CCT Finish Voltage Options BLL Beta

Notch Bollard LED 5YEAR LED WARRANTY. Order Code: Pole Order Code: Series Height Finish Options. Customer: Date: Project: Qty: Type: ft.

Date: Customer: Project: Type: Qty: Order Code: T Series - - - - - - - - T Pole Order Code: - - - Series Height Finish Options Height ft. ft. ft. ft. ft. ft. *For other heights, please consult factory

SECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).

PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3

Olivio Medio LED 5YEAR LED WARRANTY. Order Code: Pole Order Code: Series Height Finish Options. Customer: Date: Project: Qty: Type:

Date: Customer: Project: Type: Qty: Olivio Medio LED Order Code: OLML - - - - - - - Pole Order Code: - - - Series eight Finish Options OLML Series OLML Olivio Medio LED Optics S09 Spot, 9 o F40 Medium,

GENERAL ISOMETRIC LAYOUT

EXISTING OR PROPOSED WIPER WALL SUPPORT STRUCTURE GATE LID CARBATHAN HG 0 WEB GRAY LOWER PAN GRATING ALUMINUM WIPER WALL CARBATHANE HG, 90 GRAY STRUCTURAL SPECIFICATIONS:. FLOODGATE MATERIAL TO BE ALUMINUM

Single 180 Double 180 Triple. 180 Quad. 110 Lewis Road, Wantirna South, VIC 3152

Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation

One-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. Two-sided rack, hot-dip galvanized

Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted to form a serial system, with boreholes for anchoring or plugging. Bicycle parking rack Frame of angular

COMPACT DECK. Compact Deck SOUTHERN FOREST PRODUCTS ASSOCIATION SOUTHEASTERN LUMBER MANUFACTURERS ASSOCIATION

COMPACT DECK SOUTHERN FOREST PRODUCTS ASSOCIATION SOUTHEASTERN LUMBER MANUFACTURERS ASSOCIATION P.O. BOX 641700 KENNER, LA 70064-1700 (504) 443-4464 FAX (504) 443-6612 www.southernpine.com Compact Deck

AUXILIARY FRAMING AND ACCESSORIES

CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION

1.1 SUMMARY. A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards.

PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards. B. See Division 5 Section "Pipe and Tube Railings"

B. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.

SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.

Olivio Grande LED 5YEAR LED WARRANTY. Order Code: Pole Order Code: Series Height Finish Options. Customer: Date: Project: Qty: Type:

Date: Customer: Project: Type: Qty: Order Code: OLGL - - - - - - - Pole Order Code: - - - Series eight Finish Options OLGL Series OLGL Olivio Grande LED Optics S09 Spot, 9 o F40 Flood Medium, 44 o F80

EMMEGI ARCHITECTURAL FENCING MASTER SPECIFICATION SECTION METAL FENCING, GATES & RAILING SYSTEM PART 1 GENERAL

EMMEGI ARCHITECTURAL FENCING MASTER SPECIFICATION SECTION 05720 METAL FENCING, GATES & RAILING SYSTEM PART 1 GENERAL EMMEGI ARCHITECTURAL FENCING is a high quality steel fencing system comprised of a hybrid

Tools Needed. 8 per column: stainless steel or hot-dipped galvanized bolts. Mallet

Structural VINYL PERGOLA SuperiorPlasticProducts.com Tools Needed Drill Safety Glasses 1 Hammer Drill & 1/2" Masonry Bit Tape Measure & Pencil Drill Bits 1/8" 1/4" 5/8" Level 8 per column: Ratchet & Sockets

SECTION SHEET METAL FLASHING AND TRIM

SECTION 07620 PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Formed roof drainage sheet metal fabrications. 2. Formed low-slope roof sheet metal fabrications. 1.2 SUBMITTALS A. Shop Drawings: Show

Tenons Adaptors

No Fault Poles, Tenons & Adaptors Poles Tenons Adaptors Poles and Accessories Bringing You Quality Lighting Products... Dedicated to producing and delivering quality lighting products, We are proud to

New Product Release: October 2014 Boone Racks

New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance

TENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018

SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

Olivio Grande LED Candelabra Pole Top

Date: Customer: Project: Type: Qty: Olivio Grande LED Candelabra Pole Top Order Code: OLGL - - - - - - - Pole Order Code: AT524 - - - Series Height Finish Options OLGL Series OLGL Olivio Grande LED Optics

INSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls

INSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls James C. White Company, Inc. Greenville, SC PAGE 5 Standard Instrument Stands SINGLE WALL STAND

Metal Halide - Ceramic, Medium Base ED17. H050 50w H070 70w H w H w HPS - Medium Base ED17

SILL 5 Yoke Mount Project: Type: Qty: S5 Series Mounting Reflector Lamping Lamp Color Finish _ Options Pole Series Height Finish Options Voltage Series S5 SILL Cityliter 5 Yoke Mount Mounting Reflector

FLOOR ANCHOR SYSTEM APPLICATIONS L TRACK APPLICATIONS

FLOOR ANCHOR SYSTEM APPLICATIONS Sure-Lok recommends the following for floor anchor system layout and installation. These recommendations are not all-inclusive and may not be applicable to every system

INSTALLATION INSTRUCTIONS 480-4SBB / 480-6SBB SURFACE MOUNT BOX w/battery COMPARTMENT

480-4SBB / 480-6SBB SURFACE MOUNT BOX w/battery PARTMENT 4-5/8 [117mm] 1-3/4 [44mm] 4X HOLES 4-5/8 [117mm] 4X INTEGRAL PINS BATTERY PARTMENT ACCESS COVER BLACK ABS MATERIAL BOX EQUIPPED FOR WIRED OR WIRELESS

Beam Pattern. Lamping C K (coated lamp) NOL Lamp not included C737 NOL. Lamp not included K (clear lamp) NOL

SILL PR022 Projector Floodlights Project: Type: Qty: PR022 Series _ Beam Pattern _ Lamping _ Lamp Color _ Mounting _ Finish _ Voltage Lens Accessories Options Series Beam Pattern Lamping Lamp Color Mounting

_ PR020 Series. Lamping. Color. SA Stake Mount K NOL Lamp not included. Single Pole Top Double Pole Top Triple Pole Top Quad Pole Top

SILL PR020 Projector Floodlights Project: Type: _ PR020 Series Beam Pattern _ Lamping _ Lamp Color _ Mounting _ Finish _ Qty: _ Voltage Lens Accessories Options Series Beam Pattern Lamping Lamp Color Mounting

TO O L K IT. Public Bike Repair

TO O L K IT Public Bike Repair The Dero Tool Kit includes all the necessary tools to perform most routine maintenance and adjustments on most bikes. All the tools are securely fastened with stainless steel

INFUSIONS and METALWORKS Wings Accent and Acoustical Clouds

INFUSIONS and METALWORKS Wings Accent and Acoustical Clouds Assembly and Installation Instructions 1. GENERAL 1.1 Product Description Wings is a decorative ceiling element consisting of a 10 foot long

METALWORKS Wings Accent and Acoustical Clouds Installation Instructions

CEILING SYSTEMS Between us, ideas become reality METALWORKS Wings Accent and Acoustical Clouds Installation Instructions 1. GENERAL 1.1. Product Description MetalWorks Wings is a decorative ceiling element

SECTION ARCHITECTURAL WOOD CASEWORK

SECTION 06410 - ARCHITECTURAL WOOD CASEWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Wood cabinets for opaque finish. B. Flush wood paneling for transparent finish. C. Factory finishing. 1.02 RELATED REQUIREMENTS

Lateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later

Lateral Support Decks over 24 above grade require lateral support* *Exceptions to be discussed later Decking Types of Decking: -2x4s & 2x6s -five quarter span rated decking boards -Wood plastic composite

UNIFIED FACILITIES GUIDE SPECIFICATIONS

USACE / NAVFAC / AFCEC / NASA UFGS-08 33 13 (May 2009) Change 2-11/12 --------------------------- Preparing Activity: USACE Nontechnical Title Revision (August 2015) UNIFIED FACILITIES GUIDE SPECIFICATIONS

!When using electrical equipment, basic safety precautions should always be followed, including the following: INSTALLATION INSTRUCTIONS

TABLE OF CONTENTS: SHEET 2: MULLION SYSTEM INSTALLATION SHEET 3: REMOTE DRIVER BOX INSTALLATION SHEET 4: 2 X 4 EXTERIOR WITH TRANSITION PLATE INSTALLATION SHEET 5: 2 X 4 INSTALLATION SHEET 6: 4 X 4 EXTERIOR

Testing. Material testing will be according to applicable AASHTO, ASTM or Department methods as specified.

907.01 Section 907. FENCING MATERIALS 907.01 General Requirements. Materials for use in fencing property, right-of-way and other installations must comply with this section. 907.02 Testing. Material testing

Product Guide Specification

Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat,

CYCL E STAT IO N. High Capacity

CYCL E STAT IO N High Capacity The Dero Cycle Station provides high-capacity, covered bike parking for bicycle commuters. With a high roof and open platform, the Dero Cycle Station allows bike corrals,

Downtown Rack. Custom logo option available

Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking

SIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD

Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"

SECTION WIREWAYS FOR RADIOLOGY EQUIPMENT

PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 05 36 WIREWAYS FOR RADIOLOGY EQUIPMENT SPEC WRITER NOTE: Delete between //----// if not applicable to project. Also, delete any other item or paragraph not applicable

RSB-RCS/L SERIES The RSB-RCS/L Series rectangular shoebox is offered in a variety of lighting distributions with sharp cutoff to meet the challenging demands of today s site lighting projects. Fixture

ULT R A SPAC E SAV E R

ULT R A SPAC E SAV E R Double Capacity, Modular Construction The Ultra Space Saver provides easy and ample space for u-lock security on nearly any bike, including bikes with fenders. Thanks to design enhancements,

Swerve Rack CUSTOM RACKS AVAILABLE

CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.

SECTION SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO BROOKFIELD NB-500 EXTREME DUTY OPERATOR

SECTION 084229.33 SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO BROOKFIELD NB-500 EXTREME DUTY OPERATOR PART 1-GENERAL 1.01 DESCRIPTION A. This section describes

B. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.

SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section includes standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.

Today s Service Station

F I X IT Today s Service Station The Fixit includes all the tools necessary to perform basic bike repairs and maintenance, from changing a flat to adjusting brakes and derailleurs. The tools and air pump

SIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP

Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"

Subject: Specification Compliance

Subject: 08 11 13 Specification Compliance CURRIES product quality and performance is equal to or exceeds the manufacturers listed in most 08 11 13 Specification. 16 gauge top and bottom caps must be specified

SECTION INTERIOR SIGNAGE

SECTION 10 14 02 INTERIOR SIGNAGE PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by

SIGNALS AND LIGHTING FIELD GUIDE

CHAPTER 16 SIGNAL AND LIGHT POLES SIGNAL AND LIGHT POLES The standards and requirements for installing traffic control signal and light poles are presented in this chapter. 16.1 Traffic Control Signal

Yield Sign, R1-2 w/ Black Back. Size SF PNC 30=30 36=36. Curve Right Sign, W1-2R w/ Black Back. Size SF PNC 24=24.

Regulatory Signs MUTCD Compliant Stop Sign, R1-1 w/ Black Back SF-6000 - - - PNC Yield Sign, R1-2 w/ Black Back SF-2025 - - - PNC No Outlet Sign, W14-2 w/ Black Back SF-2033 - - - PNC Dead End, W14-1 w/

SECTION CARPENTRY

SECTION 06100 CARPENTRY PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Carpentry work including grounds, nailers, blocking, miscellaneous framing, plywood backing panels, plywood sheathing, preservative

TABLE OF CONTENTS: SHEET 3: REMOTE DRIVER BOX INSTALLATION SHEET 7: OCTAGON JUNCTION BOX INSTALLATION

TABLE OF CONTENTS: SHEET 2: MULLION SYSTEM INSTALLATION SHEET 3: REMOTE DRIVER BOX INSTALLATION SHEET 4: 2 X 4 EXTERIOR TRANSITION PLATE INSTALLATION SHEET 5: 2 X 4 EXTERIOR INSTALLATION SHEET 6: 4 X 4

A. Submit manufacturer's technical data and installation for each type of sign required.

SECTION 10425 PART ONE GENERAL 1.1 SECTION INCLUDES A. Interior Building Signage. B. Handicapped parking signs. C. Permanent Project Sign. 1.2 DESCRIPTION A. Signage shall consist of room number and room

Toll-Free

Primary applications for Ross DS Series Security Doors and Frames include government, industrial, commercial and residential properties where protection of people and property is of utmost concern and

DIVISION 6 WOOD AND PLASTICS

DIVISION 6 WOOD AND PLASTICS PART 1 - GENERAL 1.01 SUMMARY A. This Section includes the following: 1. Wood framing. 2. Wood supports. 3. Wood blocking. 4. Wood cants. 5. Wood nailers. 6. Wood furring.

(SMS MOUNT SHOWN) Prefix Mounting Optics Lamp Wattage Length Volts Finish Options & Accessories 14W 21W 28W 2' 3', 6' 4', 8' T5HO 2' 3', 6' 4', 8'

(SMS MOUNT SHOWN) Prefix Mounting Optics Lamp Wattage Length Volts Finish Options & Accessories SMS - surface mount single fixture SMM - surface mount multiple fixtures EAS - extended arm single fixture

DOCUMENT ADDENDUM NO. 4. Issued to all Bidders: Date: October 14, Contract Name: Electrical Installation. Contract Number: C8410

DOCUMENT 009104 - ADDENDUM NO. 4 Issued to all Bidders: Date: October 14, 2015 Contract Name: Electrical Installation Contract Number: C8410 This addendum forms a part of the Bid described above. The original

SHEET METAL FLASHING AND TRIM Christ on the Mountain

SECTION 076200 - SHEET METAL FLASHING AND TRIM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Compatibly with the bumping of flashings and trim as identified in the Membrane Roofing Section 075000.

SECTION BULLET- RESISTANT DOORS

1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and

TRELLIS. Trellis SOUTHERN FOREST PRODUCTS ASSOCIATION SOUTHEASTERN LUMBER MANUFACTURERS ASSOCIATION

TRELLIS SOUTHERN FOREST PRODUCTS ASSOCIATION SOUTHEASTERN LUMBER MANUFACTURERS ASSOCIATION P.O. BOX 641700 KENNER, LA 70064-1700 (504) 443-4464 FAX (504) 443-6612 www.southernpine.com Trellis Copyright

SECTION CABLE TRAYS FOR ELECTRONIC SAFETY AND SECURITY

SECTION 26 05 36 CABLE TRAYS FOR ELECTRONIC SAFETY AND SECURITY PART 1 -GENERAL 1.1 SUMMARY A. Section includes cable tray. 1.2 REFERENCES A. ASTM A 123 Standard Specification for Zinc (Hot-Dip Galvanized)

F-4 FURNITURE. Contents

Contents F-4-1 Public Art Pole F-4-2 Banner Pole F-4-3 Typical Banner Installation F-4-4a Banner/Flower Basket Pole F-4-4b Banner/Flower Basket Pole F-4-5 Flower Basket Brackets F-4-6 TTC Station Sign

Safe and secure Dero

B I K E D E P OT Safe and secure Whether the project is at a transit station, university campus, or residential building, the Bike Depot s modular design lets customers easily build out to meet their space

Decorative Street Lighting

Decorative Street Lighting Options offered by: TSN 475238 Rev. 01/08 Copyright 2008 Oncor Electric Delivery. All Rights Reserved. In response to our customers desire for more variety in street light accessories,

Installation instructions

Installation instructions IMPORTTANT SAFTGUARDS When using electrical equipment, basic safty precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS 1. DANGER-Risk

Inula Bollard LED Solar

Date: Customer: Project: Type: Qty: Inula Bollard LED Solar Order Code: IBLS - - - - - - IBLS Series IBLS Inula Bollard LED Solar Height.. ft ft.. ft ft Light Engine Q * Q9 * Q8 * Q * QS QD *Typical lumen

Installation Instructions

Column & Beam Units with Debris Netting Installation Instructions Laminated Wood Systems, Inc. Seward, Nebraska 800-949-3526 2015 LWS, INC. AVR-NET INSTALL 05-12-16 AVR Installation Notes 1 Safety The

.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.

PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Installation

SECTION ELECTRICAL IDENTIFICATION

SECTION 16075 ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

STRATUS SHELTER. Take bike parking to new heights

Take bike parking to new heights The Stratus Shelter is a striking bike shelter option for any transit station, university campus, or multi-family residential building project. It is constructed of American

STEEL PIPE GUIDERAIL 01/01/

NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports

PROJECT LOCATION SECTION PREFINISHED STEEL DOOR FRAMES

SECTION 08 1213.17 PART 1 - GENERAL 1.01 SECTION INCLUDES A. Prefinished steel door frames. B. [Sidelites] [, borrowed lites] [, and transom] assemblies. 1.02 RELATED REQUIREMENTS A. Section 06 2000 Finish

ALUMINUM PIPE GUIDERAIL 01/01/

NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy

SECTION BATHROOM ACCESSORIES

SECTION 10-20-00 BATHROOM ACCESSORIES PART 1 GENERAL 1.01 SCOPE OF WORK A. Include all supplied materials, to complete the work of the above referenced section. 1. SCS to supply bathroom accessories, Finish

300 Series Pin & Barrel Type Continuous Stainless Steel Hinges

www.mfsales.com 300 Series Pin & Barrel Type Continuous Stainless Steel Hinges Short Form Architectural Specification: Continuous hinges shall be full height piano-type hinge providing full height door

KO LO SH E LT E R. High Capacity and Flexibility

KO LO SH E LT E R High Capacity and Flexibility The unique styling of our redesigned Dero Kolo Shelter will help beautify your facility and provide secure, covered bike parking for cyclists. The Kolo is

ADJUSTABLE BASKETBALL SYSTEM ASSEMBLY INSTRUCTIONS AND OWNER'S MANUAL

IRONCLAD SPORTS, INC HIGHLIGHT HOOPS ADJUSTALE ASKETALL SYSTEM ASSEMLY INSTRUCTIONS AND OWNER'S MANUAL MODEL: HIL885!! WARNING FAILURE TO COMPLY WITH ANY OF THE WARNINGS IN THESE INSTRUCTIONS MAY RESULT

SECTION TRAFFIC SIGNAGE

SECTION 10 14 53 TRAFFIC SIGNAGE PART 1 - GENERAL 1.01 SECTION INCLUDES A. Furnishing and installing roadside traffic signage. B. Providing additional traffic signs as required in Sections 01 55 28 Controlling

H O O P RAC K. Simple Security

H O O P RAC K Simple Security The Hoop Rack is a proven design that provides high security and easy bike parking. The Hoop Rack uses thick pipe construction and the full radius of the bend makes the Hoop

INTEX Millwork Solutions SECTION EXTERIOR PVC PERGOLAS (IBC Compliant)

SECTION 066030 EXTERIOR PVC PERGOLAS (IBC Compliant) PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and other Contract Documents, listed in the agreement between the Owner and Contractor, apply to

Five Star Panel Installation Instructions

Five Star Panel Installation Instructions How to Store Five Star Panels You will need to store FIVE STAR PANELS in dry place to prevent staining, deterioration and possibly void all warranties. Stand the

SECTION METAL FABRICATIONS

SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM

3. Use base plate as template (see FIG. 4-1) to mark location for fasteners.

Plan the layout of the railing it is the beginning of a successful project. Getting Started... 1. Completely read the application instructions before starting the installation of the railing. 2. Properly

UP133 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CL

UP33 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL TRIANGLE

HEADED ANCHOR BOLT OPTION

Ground Rod 18" min. Depth, 2 Required nchor Bolts. Number (min. 8) and Size as Required by Manufacturer. 6" to 12" Ground Line " dia. Conduit Number and Direction as Shown on Lighting Layout Sheets. Slope