SP8008 Series Diode Array
|
|
- Alaina Riley
- 5 years ago
- Views:
Transcription
1 SP88 Series Diode Array RoHS Pb GRN Description The SP88 integrates eight channels of ultra low capacitance common mode and differential mode protection for electronic equipment exposed to electrostatic discharges (SD. This robust component can effectively protect against SD events exceeding the IC contact SD level of ±8 kv without any performance degradation. The extremely low loading capacitance also makes it ideal for protecting high speed signal pins such as V-by-One, mbedded DisplayPort, HDMI 1. through 2.1 and USB 2./3./3.1. Pinout Functional Block Diagram Features SD, IC , +3kV/-23kV contact, +3kV/-23kV air FT, IC , 4A (t P =5/5ns Lightning, IC nd edition, 4A (t P =8/2μs Low capacitance 3GHz (TYP per I/O Applications LCD/PDP TVs LCD/LD Monitors Notebook Computers Ultrabooks Automotive Displays Low leakage current of.5μa (MAX at 5V Small form factor μdfn packages (JDC MO- 229 saves board space and supports straightthrough routing of the data lines. Halogen free, Lead free and RoHS compliant Flat Panel Displays Digital Signage HD Cameras/Projectors USB and HDMI interfaces Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated.
2 Absolute Maximum Ratings Symbol Parameter Value Units Peak Current (t p =8/2μs 4. A T OP Operating Temperature -4 to 125 C T STOR Storage Temperature -55 to 15 C CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. lectrical Characteristics (T OP =25ºC Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V RWM 5 V Reverse Breakdown Voltage V BR I R =1mA 6 V Reverse Leakage Current I LAK V R =5V, I/O to GND.5 µa =1A, t P =8/2µA, Fwd 9.39 V Clamp Voltage 1 V C =2A, t P =8/2µA, Fwd 1.38 V =4A, t P =8/2µA, Fwd V Dynamic Resistance 1 R DYN TLP, t P =1ns, I/O to GND.4 Ω IC (Contact +3 / -23 kv SD Withstand Voltage 1 V SD IC (Air +3 / -23 kv Diode Capacitance 1 C I/O-GND Reverse Bias=V, f=3 GHz.3 pf Note: 1 Parameter is guaranteed by design and/or component characterization. 8/2μS Pulse Waveform Clamping Voltage vs. 11% 1% 9% 8% Percent of 7% 6% 5% 4% 3% Clamp Voltage (V C % 2. 1% % Time (μs Peak Pulse Current- (A Positive Transmission Line Pulsing (TLP Plot NegativeTransmission Line Pulsing (TLP Plot TLP Current (A TLP Voltage (V TLP Current (A TLP Voltage (V
3 Temperature TVS Diode Arrays (SPA Diodes IC kv Contact SD Clamping Voltage IC kv Contact SD Clamping Voltage ye diagram 5Gbps, 2.5 GHz w/sp88-8utg Insertion Loss Diagram -5. S21 Insertion Loss (db Frequency (Hz Soldering Parameters Reflow Condition - Temperature Min (T s(min 15 C Pb Free assembly T P Ramp-up t P Critical Zone TL to TP Pre Heat - Temperature Max (T s(max 2 C - Time (min to max (t s 6 18 secs Average ramp up rate (Liquidus Temp (T L to peak T S(max to T L - Ramp-up Rate 3 C/second max 3 C/second max T L T S(max T S(min t S Preheat t L Ramp-down Reflow - Temperature (T L (Liquidus 217 C - Temperature (t L 6 15 seconds 25 time to peak temperature Time Peak Temperature (T P 26 +/-5 C Time within 5 C of actual peak Temperature (t p 2 4 seconds Ramp-down Rate 6 C/second max Time 25 C to peak Temperature (T P 8 minutes Max. Do not exceed 26 C
4 Part Numbering System Part Marking System SP 88 8 U T G TVS Diode Arrays G= Green (SPA Diodes T= Tape & Reel Series Number of Channels Package U=μDFN-14 (5.5x1.5mm Ordering Information Part Number Package Marking Min. Order Qty. SP88-8UTG µdfn-14 SP Package Dimensions D D µdfn-14(5.5x1.5x.5mm JDC MO-229 Pin1 Millimeters Inches Symbol Top View Min Nom Max Min Nom Max c Pin1 2 L Package Outline.62mm (3X Top View Side View eb NdB D2 b ea NdA Bottom View.56mm (3X 14 A1 A 1 h.43mm (6X 1.8mm c A A b c.1 Side.15 View D D NdB NdA 5. eb BSC.197 BSC ea.5 BSC.2 BSC eb 1.5 BSC.59 BSC 2 NdB 3. BSC.118 BSC L D b ea L.2.3 NdA h.5 Bottom.1 View Package Outline.56mm (3X.62mm (3X A1 A h.26mm (14X e=.5mm Recommended soldering pad layout.5mm (14X.43mm (6X 1.8mm.26mm (14X e=.5mm Recommended soldering pad layout.5mm (14X
5 Low Capacitance SD Protection - SP312 SP88 Series mbossed Carrier Tape & Reel Specification µdfn-14 P1 P2 P D User Feeding Direction Symbol Millimeters A /-.1 B /-.1 D /- W F Pin 1 Location D1 Ø 1. min /-.1 F 5.5 +/-.5 D1 A T K.7 +/-.1 P 2. +/-.5 P1 4. +/-.1 K B P2 4. +/-.1 T.3 +/-.5 W /-.1 SP312 Series
SP pF 24kV Bidirectional Discrete TVS
SP1312 11pF 24kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1312 bidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSP4020 Series 2.5pF, 30A Discrete TVS Diode
SP400 Series.5pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP400 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSP A Discrete Unidirectional TVS Diode
SP1212 12A Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SP1212 unidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationSP1255P Series 0.5pF, 12kV Diode Array for μusb
TVS Diode Arrays (SPA Diodes Low Capacitance ESD and Surge Protection -.pf, 2kV Diode Array for μusb RoHS Pb GREEN Description The SP2P integrates 3 channels of ultra-low capacitance steering diodes and
More informationTVS Diode Arrays (SPA Diodes)
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationSM24CANA Series 200W TVS Diode Array
SM24CANA Series 2W TVS Diode Array RoHS Pb GREEN Description The SM24CANA TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge
More informationSP4021 Series 2.5pF, 25A Discrete TVS Diode
SP40 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The SP40 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSP814x Series 1.0pF 22KV Diode Array
SP814x Series 1.pF 22KV Diode Array RoHS Pb GREEN Description The SP814x series integrates 4 or 6 channels of ultra low capacitance rail-to-rail diodes and an additional zener diode to provide protection
More informationAQ4022 Series 1.3pF, 15A Discrete TVS Diode
Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering diodes with one or two avalanche
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
More informationSP6003 Series 7pF EMI Filter Array with ESD Protection
ESD and EMI Filter Devices - 7pF EMI Filter Array with ESD Protection RoHS Pb GREEN Description Littelfuse s integrates 4 and 6 EMI filters (C-R-C) into a small, low-profile µdfn package with each filter
More informationSP6002 Series 15pF 15kV EMI Filter Array
TVS Diode Arrays (SPA D) ESD and EMI Filter Devices - 15pF 15kV EMI Filter Array RoHS Pb GREEN Description The Littelfuse SP6002 SPA series integrates 4, 6 and 8 EMI filters (C-R-C) into a small, low-profile
More informationAQxxC-01FTG Series. TVS Diode Array (SPA Diodes) General Purpose ESD Protection - AQxxC-01FTG SD-C Series Series. RoHS Pb GREEN.
General Purpose ESD Protection - AQxxC-1FTG SD-C Series Series AQxxC-1FTG Series RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic
More informationTVS Diode Arrays (SPA Devices) TVS Diode Arrays. Low Capacitance ESD Protection - SP3012 Series. (SPA Devices) SP3012. SP 3012 xx U T G V * *
TVS Diode rrays (SP Devices) SP312 Series.5pF Diode rray RoHS Pb GRN Description Pinout The SP312 integrates either 4 or 6 channels of ultra low capacitance rail-to-rail diodes and an additional zener
More informationSP4208 series 3.0pF, 30A Discrete TVS Diode
SP4208 series 3.0pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP4208 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationLightning Surge Protection - SP4031 SP1050 Series 7 (N/C) 6 (N/C)
SP431 RoHS Pb GREEN Description The SP431 hybrid protector offers both overcurrent and differential only overvoltage protection for applications such as 1/1/1 BaseT ports. Compliant with the newest standards
More informationSD Series 450W Discrete Unidirectional TVS Diode
General Purpose ESD Protection - 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SD series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and
More informationAQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationSP3130 Series 0.3pF 10KV Bidirectional Discrete TVS
SP313 Series.3p 1KV Bidirectional Discrete VS RoHS Pb GRN Description he SP313 includes back-to-back VS diodes fabricated in a proprietary silicon avalanche technology to provide protection for electronic
More informationSP3050 Lead-Free/Green Series
RoHS Pb GREEN Description The SP3050 integrates low capacitance rail-to-rail diodes with an additional zener diode to protect each I/O pin against ESD and high surge events. This robust device can safely
More informationSP4040 Series 3.3V 75A Rail Clamp Array
3.3V 7A Rail Clamp Array RoHS Pb GREEN Description The SP4040 provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationEAYW ESD5425E ESD5425E. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect high
More information6V8 * ESDA6V8UD ESDA6V8UD. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) array designed to
More information5V 4 * 1 5 ESD5344D ESD5344D. Descriptions. Features. Order information. Applications. http//:www.sh-willsemi.com
ESD5344D 4-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ESD5344D is an ultra-low capacitance TVS (Transient Voltage Suppressor)
More informationESD5311X ESD5311X 1-Line, Bi-directional, Ultra-low Capacitance http//: Transient Voltage Suppressors Descriptions
1-Line, Bi-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) designed to protect high
More information3 * ESD5302N ESD5302N. Descriptions. Features. Applications. Order information. http//:
2-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) array designed to
More informationThe ESD5451R is available in DFP1006-2L package. Standard products are Pb-free and Halogen-free. Circuit diagram
1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to protect sensitive
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT23AXXL02 series
Product specification December 19, 218 V. DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT2AXXL2 series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection
More informationESD5651N ESD5651N. Descriptions. Features. Applications. Order information. Pin1. Pin2. 4.5V, Single Li-ion Battery Port Surge Protector
4.5V, Single Li-ion Battery Port Surge Protector http//:www.sh-willsemi.com Descriptions The is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to protect sensitive electronic
More informationESD9N12BA ESD9N12BA. Descriptions. Features. Applications. Order information. http//:
1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ES9N12BA is a TVS (Transient Voltage Suppressor) designed to protect sensitive electronic components which
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The is an ultra low capacitance TVS array designed to potect the gigabit network hundred meters transport port.this series has been
More informationTVS Diode Arrays (SPA Diodes) SP725 Series 5pF 8kV Diode Array. General Purpose ESD Protection - SP725 Series. RoHS Pb GREEN.
SP725 Series 5pF 8kV Diode Array RoHS Pb GREEN Description The SP725 is an array of SR/Diode bipolar structures for ESD and overvoltage protection of sensitive input circuits. The SP725 has 2 protection
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER LBD8CXXL01 series
Product specification ecember 18, 18 V. ATA SHEET ELECTROSTATIC ISCHARGE PROTECTION EVICES INUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic ischarged Protection evices (ES) ata
More informationTVS Diode Arrays (SPA Diodes) SP725 Series 5pF 8kV Diode Array. General Purpose ESD Protection - SP725 Series. RoHS Pb GREEN.
SP725 Series 5pF 8kV Diode Array RoHS Pb GREEN Description The SP725 is an array of SR/Diode bipolar structures for ESD and overvoltage protection of sensitive input circuits. The SP725 has 2 protection
More informationPESDAWC236T5VU Low Capacitance TVS Array
Low Capacitance TVS Array Description The is low capacitance transient voltage suppressor 6 5 4 array for high speed data interface that designed to protect sensitive electronics from damage or latch-up
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s UDT23AXXL02 series are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER SDD32A05L01 series
Product specification November 7, 218 V. ATA SHEET ELECTROSTATIC ISCHARGE PROTECTION EVICES INUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 escription Electrostatic ischarged Protection evices
More informationCDDFN N - TVS/Steering Diode Array
*RoHS COMPLIANT Features Low capacitance -.3 pf ESD protection Vcc + six I/O s RoHS compliant* Applications USB 3. HDMI. High speed port protection Portable electronics CDDFN-N - TVS/Steering Diode Array
More informationAOZ8211 One-line TVS Diode
One-line TVS Diode General Description The OZ8211 is a one-line transient voltage suppressor diode designed to protect voltage sensitive electronics from high transient conditions and SD. This device incorporates
More informationRClamp0504N RailClamp Low Capacitance TVS Diode Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are
More informationQualified for industrial applications according to the relevant tests of JEDEC47/20/22
TVS (transient voltage suppressor) Bi-directional, 5.5 V,.2 pf, 5, RoHS and halogen free compliant Feature list ESD/transient protection of high speed data lines according to: - IEC6-4-2 (ESD): ±25 kv
More informationQualified for industrial applications according to the relevant tests of JEDEC47/20/22
TVS (transient voltage suppressor) Bi-directional, 5.5 V,.3 pf, 21, RoHS and halogen free compliant Features ESD/transient protection of high speed data lines according to: - IEC61-4-2 (ESD): ±18 kv (air/contact
More informationPESDLC23T5VU Low Capacitance ESD Protector
Low Capacitance ESD Protector Description The is a TVS designed to protect I/O or data lines from the damaging effects of ESD. It is low capacitance transient voltage suppressors for high speed data interface
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationAOZ8231A. One-line Bi-directional TVS Diode. General Description. Features. Applications
One-line Bi-directional TVS Diode General Description The OZ8231 is a one-line bi-directional transient voltage suppressor diode designed to protect voltage sensitive electronics from high transient conditions
More informationTVS Diode Arrays (SPA Diodes) SP723 Series 5pF 8kV Diode Array. General Purpose ESD Protection - SP723 Series. RoHS Pb GREEN.
SP723 Series 5pF 8kV Diode Array RoHS Pb GREEN Description The SP723 is an array of SR/Diode bipolar structures for ESD and over-voltage protection of sensitive input circuits. The SP723 has 2 protection
More informationESDCANxx-2BLY. Automotive dual-line TVS in SOT23-3L for CAN bus. Datasheet. Features. Applications. Description
Datasheet Automotive dual-line TVS in SOT23-3L for CAN bus Features AEC-Q101 qualified Dual-line ESD and EOS protection Breakdown voltage: V BR : 25 V : 27 V : 27.5 V : 38 V Bidirectional device Max pulse
More informationPESDHC5D7VU ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationLCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional
Transient Suppression Diodes LCE Series RoHS Pb e3 Uni-directional Description The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationPESDSC2FD5VB ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationQualified for industrial applications according to the relevant tests of JEDEC47/20/22
TVS (transient voltage suppressor) Bi-directional, 5.5 V, 3.5 pf, 21, RoHS and halogen free compliant Features ESD/transient protection of susceptible I/O lines to: - IEC61-4-2 (ESD): ±3 kv (air/contact
More informationL02U5V0MA-6C. STAND-OFF VOLTAGE 5.0 Volts POWER DISSIPATION - 20 Watts ESD PROTECTION DIODE SLP4120P10
/. L2U5VMA-6C GENERAL DESCRIPTION ESD PROTECTION DIODE The L2U5VMA-6C is ultra low capacitance TVS arrays designed to protect high Speed data interfaces. This Series has been specifically designed to protect
More informationRClamp3304NA RailClamp 3.3V TVS Arrays
- RailClamp Description RailClamp low capacitance TVS array is designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationQualified for industrial applications according to the relevant tests of JEDEC47/20/22
TVS (Transient Voltage Suppressor) Bi-directional,. V,.8 pf, 2, RoHS and Halogen Free compliant Features ESD / transient protection according to: - IEC6-4-2 (ESD): ±8 kv (air), ± kv (contact discharge)
More information4 Line ESD/EMI Protection for Color LCD Interfaces UM4401 DFN
4 Line ESD/EMI Protection for Color LCD Interfaces DFN8 2.1 1.6 General Description The is a low pass filter array with integrated TVS diodes. It is designed to suppress unwanted EMI/RFI signals and provide
More informationData Sheet. General Purpose ITVS, 4 I/Os, C I/O-VSS <0.65pF. Features. General Description. Applications. Pin Configuration
General Description BCD ITVS (Integrated Transient Voltage Suppression) devices are designed and built using BCD proprietary process technology. These devices integrate the various diodes, transistors
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationESDARF02-1BU2CK. Single-line bidirectional ESD protection for high speed interface. Features. Applications. Description
Single-line bidirectional ESD protection for high speed interface Features Datasheet production data Bidirectional device Extra low diode capacitance: 0.2 pf Low leakage current 0201 SMD package size compatible
More informationSR2.8 - SR3.3. ultra low capacitance steering diode/tvs array. Description. applications
ultra low capacitance steering diode/tvs array Description The SR series offers two low voltage (2.8V & 3.3V) and low capacitance steering diode TVS arrays. This series is designed to protect two line
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationAPM8005K. Pin Description. Features. Applications. Ordering and Marking Information. Dual N-Channel Enhancement Mode MOSFET 80V/4.
Dual N-Channel Enhancement Mode MOSFET Features Pin Description 80V/4.7A, R DS(ON) =45mΩ (Typ.) @ V GS = 10V R DS(ON) =55mΩ (Typ.) @ V GS = 5V Reliable and Rugged Lead Free and Green Devices Available
More informationRClamp3654P RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp is a low capacitance TS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationFeatures. Ordering and Marking Information. Dual Enhancement Mode MOSFET (N- and P-Channel) N-Channel 20V/3A, R DS(ON)
Dual Enhancement Mode MOSFET (N- and P-Channel) Features Pin Description N-Channel 20V/3A, =50mΩ(typ.) @ =4.5V =65mΩ(typ.) @ =2.5V P-Channel -20V/-2A, =90mΩ(typ.) @ =-4.5V =30mΩ(typ.) @ =-2.5V Reliable
More informationSR70 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The has been specifically designed to protect sensitive components which are connected to data and transmission
More informationBidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD Protection Diode in SOT-23
VCAN26A2-3S Bidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD Protection Diode in SOT-23 FEATURES 3 For CAN and FLEX-Bus applications Small SOT-23 package AEC-Q1 qualified available 1 2 22742
More informationP-Channel Enhancement Mode MOSFET
Features -3V/-3, =46mΩ (typ.) @ V GS =-1V =55mΩ (typ.) @ V GS =-4.5V =79mΩ (typ.) @ V GS =-2.5V Super High Dense Cell Design Reliable and Rugged Enhance ESD Cell Protection Lead Free and Green Devices
More informationAssembly Material. Handling Code Temperature Range Package Code
Dual Enhancement Mode MOSFET (N- and P-Channel) Features Pin Description N-Channel 20V/3A, R DS(ON) =50mΩ(typ.) @ =4.5V R DS(ON) =65mΩ(typ.) @ =2.5V P-Channel -20V/-2A, R DS(ON) =90mΩ(typ.) @ =-4.5V R
More information4-Channel LCR - EMI-Filter with ESD-Protection VEMI45LA-HNH VEMI45LA-HNH-G Molding compound flammability rating
-Channel LCR - EMI-Filter with ESD-Protection VEMILA-HNH Features Ultra compact LLP7-9L package Low package profile of. mm -channel LC EMI-filter Low leakage current Line inductance L S = nh Low line resistance
More informationPackage Code. Handling Code. Assembly Material
P-Channel Enhancement Mode MOSFET Features Pin Description -2V/-4.9A, R DS(ON) =43mΩ (Max.) @ V GS =-4.5V R DS(ON) =58mΩ (Max.) @ V GS =-2.5V R DS(ON) =88mΩ (Max.) @ V GS =-1.8V 1% UIS + R g Tested Reliable
More informationBidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD-Protection Diode in SOT-323
VCAN26A2-3G Bidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD-Protection Diode in SOT-323 3 1 2 22742 MARKING (example only) 22743 WW VY ABC ABC = type code (see table below) WW = date code
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationUM Line ESD/EMI Protection for Color LCD Interfaces DFN General Description. Rev.10 Mar.
8 Line ESD/EMI Protection for Color LCD Interfaces UM8401 DFN16 4.0 1.6 General Description The UM8401 is a low pass filter array with integrated TVS diodes. It is designed to suppress unwanted EMI/RFI
More informationTClamp0602N. Low Capacitance TVS for Ethernet and Telecom Interfaces. PROTECTION PRODUCTS - TransClamp ΤΜ Description. Features
ΤΜ - TransClamp ΤΜ Description A TransClamp ΤΜ is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components
More informationPackage Code S : SOP-8. Date Code YYXXX WW
N-Channel Enhancement Mode MOSFET Features 100 V/8 A R DS(ON) = 20 m Ω (typ.) @ V GS =10V Avalanche Rated Reliable and Rugged Lead Free and Green DevicesAvailable (RoHS Compliant) Pin Description D D D
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More information4-Channel EMI-Filter with ESD-Protection FEATURES VEMI45AA-HNH VEMI45AA-HNH-GS MOLDING COMPOUND FLAMMABILITY RATING
4-Channel EMI-Filter with ESD-Protection 2383 8 7 6 5 9 1 2 3 4 MARKING (example only) Dot = pin 1 marking Y = type code (see table below) XX = date code 2522 YXX 2719 FEATURES Ultra compact LLP1713-9L
More information1 Bi-directional Ultra-low Capacitance ESD / Transient Protection Diode
Bi-directional Ultra-low Capacitance ESD / Transient Protection Diode 1 Bi-directional Ultra-low Capacitance ESD / Transient Protection Diode 1.1 Features ESD / transient protection of RF signal lines
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationVBUS054B-HS3 VBUS054B-HS3-GS Molding compound flammability rating. Weight
VBUS54B-HS3 4-Line BUS-port ESD-protection Features Ultra compact LLP75-6A package 4-line USB ESD-protection Low leakage current Low load capacitance C D =.8 pf ESD-protection to IEC 61-4-2 ± 15 kv contact
More information0402ESDA-MLP ESD suppressor
ESD suppressor Supersedes September 2010 Pb HALOGEN HF FREE Applications ESD port protection for mobile/smart phones Game console ESD port protection High speed ESD data port protection Set-top-boxes Tablets,
More informationTVS (transient voltage suppressor) Bi-directional, 18 V (AC), 13 V (DC), 0.3 pf, 0201, RoHS and halogen free compliant
TVS (transient voltage suppressor) Bi-directional, 18 V (AC), 13 V (DC),.3 pf, 21, RoHS and halogen free compliant Feature list ESD/transient protection of high speed data lines according to: - IEC61-4-2
More informationSGM48754 Quad SPST CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage
More informationSLVDA2.8LC. 600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY Description The is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such
More informationPAM1LIN 200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION The is an asymmetrical line protection transient voltage suppressor array, designed for local interconnect network (LIN) bus protection. This
More informationUM Line ESD/EMI Protection for Color LCD Interfaces DFN General Description. Rev.06 Dec.
6 Line ESD/EMI Protection for Color LCD Interfaces UM6401 DFN12 3.0 1.6 General Description The UM6401 is a low pass filter array with integrated TVS diodes. It is designed to suppress unwanted EMI/RFI
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Balanced Series - MS-013. Description
SIDCtor Balanced Series - MS- RoHS Pb e Description The SIDCtor Balanced Series MS- are designed to protect baseband equipment from overvoltage transients. The patented Y configuration ensures balanced
More informationuclamp3306p Low Voltage TVS for ESD Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics Applications 1.
- MicroClamp TM Description The μclamp TM series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each
More informationTVS (transient voltage suppressor) Bi-directional, 5.5 V, 0.1 pf, 0201, 0402, RoHS and halogen free compliant
TVS (transient voltage suppressor) Bi-directional, 5.5 V, 0.1 pf, 0201, 0402, RoHS and halogen free compliant Features ESD/transient protection of high speed data lines according to: - IEC61000-4-2 (ESD):
More informationGBLC05CDN - GBLC24CDN
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The GBLCxxCDN Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and SMART phones.
More information4 PIN DIP LOW INPUT PHOTOTRANSISTOR PHOTOCOUPLER EL8171-G Series
Schematic Features: Current transfer ratio (CTR: 50~300% at I F =0.5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up
More informationPGB2 Series Halogen Free / Lead-Free
Halogen Free / Lead-Free Description PulseGuard ESD Suppressors help protect sensitive electronic equipment against electrostatic discharge (ESD). They use polymer composite materials to suppress fastrising
More information6-Channel EMI-Filter with ESD-Protection FEATURES VEMI65AC-HCI VEMI65AC-HCI-GS MOLDING COMPOUND FLAMMABILITY RATING
6-Channel EMI-Filter with ESD-Protection 12 11 9 8 7 13 1 2 3 4 5 6 2378 21839 MARKING (example only) YYXX 272 FEATURES Ultra compact LLP2513-13L package Low package profile of.6 mm 6-channel EMI-filter
More informationUM :XX. 6 Line ESD/EMI Protection for Color LCD Interfaces UM6401 DFN General Description
6 Line ESD/EMI Protection for Color LCD Interfaces DFN12 3.0 1.6 General Description The is a low pass filter array with integrated TVS diodes. It is designed to suppress unwanted EMI/RFI signals and provide
More information