SP pF 24kV Bidirectional Discrete TVS
|
|
- Robert Garrison
- 5 years ago
- Views:
Transcription
1 SP pF 24kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1312 bidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic discharge protection level for electronic equipment. The SP1312 TVS can safely absorb repetitive ESD strikes of ±24 kv (contact and air discharge as defined in IEC without any performance degradation. Additionally, each TVS can safely dissipate a 3A 8/20 surge event as defined in IEC nd Edition. Pinout Features 0201 Flipchip 1 2 Note: Drawing not to scale ESD, IEC , ±24kV contact, ±30kV air EFT, IEC , 40A (5/50ns Lightning, 3A (8/20 as defined in IEC nd edition Low capacitance of 11pF (@ V R =0V Low leakage current of 0.02μA(TYP at 12V Industries smallest ESD footprint available (01005 Halogen free, lead free and RoHS compliant Functional Block Diagram 1 2 Applications Mobile Phones Smart Phones Camcorders Portable Medical Digital Cameras Wearable Technology Portable Navigation Components Tablets Point of Sale Terminals Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated.
2 Absolute Maximum Ratings Symbol Parameter Value Units Peak Current (t p =8/20μs 3 1 A T OP Operating Temperature -40 to 125 C T STOR Storage Temperature -55 to 150 C Notes: 1. CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T OP =25ºC Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V RWM I R 1μA 12 V Breakdown Voltage V BR I R =1mA V Reverse Leakage Current I LEAK V R =12V μa Clamp Voltage 1 V C =1A, t p =8/20µs, Fwd V =3A, t p =8/20µs, Fwd V Dynamic Resistance 2 R DYN TLP, t P =100ns, I/O to I/O 0.48 Ω ESD Withstand Voltage 1 V ESD IEC (Contact Discharge ±24 kv IEC (Air Discharge ±30 kv Diode Capacitance 1 C D Reverse Bias=0V pf Note: 1 Parameter is guaranteed by design and/or component characterization. 2 Transmission Line Pulse (TLP with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns Clamp voltage vs. for 8/20μs Waveshape Capacitance vs. Reverse Bias Clamp Voltage-Vc (V Peak Pulse Current- (A Capacitance (pf Reverse Bias Voltage (V
3 Temperature TVS Diode Arrays (SPA Diodes Positive Transmission Line Pulsing (TLP Plot Negative Transmission Line Pulsing (TLP Plot TLP Current (A TLP Current (A TLP Voltage (V TLP Voltage (V 8/20μs Pulse Waveform 110% 100% 90% 80% Percent of 70% 60% 50% 40% 30% 20% 10% 0% Time (μs Soldering Parameters Reflow Condition Pre Heat Pb Free assembly - Temperature Min (T s(min 150 C - Temperature Max (T s(max 200 C - Time (min to max (t s secs Average ramp up rate (Liquidus Temp (T L to peak 3 C/second max T P T L T S(max Preheat Ramp-up t P t L Critical Zone TL to TP Ramp-down T S(max to T L - Ramp-up Rate 3 C/second max - Temperature (T L (Liquidus 217 C Reflow - Temperature (t L seconds Peak Temperature (T P /-5 C T S(min 25 t S time to peak temperature Time Time within 5 C of actual peak Temperature (t p seconds Ramp-down Rate 6 C/second max Time 25 C to peak Temperature (T P 8 minutes Max. Do not exceed 260 C
4 Part Marking System Product Characteristics Lead Plating Lead Material Substrate material Flammability Tin plating Copper bump Silicon UL Recognized compound meeting flammability rating V-0 Ordering Information Part Number Package Min. Order Qty. SP WTG Flipchip Part Numbering System TVS Diode Arrays (SPA Diodes Series Number of Channels SP W T G G= Green T= Tape & Reel Package W:01005 Flipchip Package Dimensions Flipchip A E A2 D Pin 1 Top View Side View 0.15mm 0.15mm A1 L2 e P Bottom View 0.15mm L Flipchip Symbol Millimeters Inches Min Typ Max Min Typ Max A A A e BSC BSC E D F G P mm 0.23mm 0.30mm Recommended soldering pad layout 0.30mm Stencil apertures Stencil thickness : 80um Drawing# : W01-A
5 Embossed Carrier Tape & Reel Specification Flipchip Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at
SP A Discrete Unidirectional TVS Diode
SP1212 12A Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SP1212 unidirectional TVS is fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationTVS Diode Arrays (SPA Diodes)
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationAQ4022 Series 1.3pF, 15A Discrete TVS Diode
Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering diodes with one or two avalanche
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSP4208 series 3.0pF, 30A Discrete TVS Diode
SP4208 series 3.0pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP4208 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSP4021 Series 2.5pF, 25A Discrete TVS Diode
SP40 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The SP40 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSP4020 Series 2.5pF, 30A Discrete TVS Diode
SP400 Series.5pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP400 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- AQ4 SP4 Series AQ4 Series.5pF, 3A Discrete TVS Diode RoHS Pb GREEN Description The AQ4 components integrate low capacitance steering diodes with
More informationAQxxC-01FTG Series. TVS Diode Array (SPA Diodes) General Purpose ESD Protection - AQxxC-01FTG SD-C Series Series. RoHS Pb GREEN.
General Purpose ESD Protection - AQxxC-1FTG SD-C Series Series AQxxC-1FTG Series RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic
More informationLightning Surge Protection - SP4031 SP1050 Series 7 (N/C) 6 (N/C)
SP431 RoHS Pb GREEN Description The SP431 hybrid protector offers both overcurrent and differential only overvoltage protection for applications such as 1/1/1 BaseT ports. Compliant with the newest standards
More informationSM24CANA Series 200W TVS Diode Array
SM24CANA Series 2W TVS Diode Array RoHS Pb GREEN Description The SM24CANA TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge
More informationAQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
More informationSD Series 450W Discrete Unidirectional TVS Diode
General Purpose ESD Protection - 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SD series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and
More informationSP1255P Series 0.5pF, 12kV Diode Array for μusb
TVS Diode Arrays (SPA Diodes Low Capacitance ESD and Surge Protection -.pf, 2kV Diode Array for μusb RoHS Pb GREEN Description The SP2P integrates 3 channels of ultra-low capacitance steering diodes and
More informationSP6003 Series 7pF EMI Filter Array with ESD Protection
ESD and EMI Filter Devices - 7pF EMI Filter Array with ESD Protection RoHS Pb GREEN Description Littelfuse s integrates 4 and 6 EMI filters (C-R-C) into a small, low-profile µdfn package with each filter
More informationSP6002 Series 15pF 15kV EMI Filter Array
TVS Diode Arrays (SPA D) ESD and EMI Filter Devices - 15pF 15kV EMI Filter Array RoHS Pb GREEN Description The Littelfuse SP6002 SPA series integrates 4, 6 and 8 EMI filters (C-R-C) into a small, low-profile
More informationSP814x Series 1.0pF 22KV Diode Array
SP814x Series 1.pF 22KV Diode Array RoHS Pb GREEN Description The SP814x series integrates 4 or 6 channels of ultra low capacitance rail-to-rail diodes and an additional zener diode to provide protection
More informationSP8008 Series Diode Array
SP88 Series Diode Array RoHS Pb GRN Description The SP88 integrates eight channels of ultra low capacitance common mode and differential mode protection for electronic equipment exposed to electrostatic
More informationSP4040 Series 3.3V 75A Rail Clamp Array
3.3V 7A Rail Clamp Array RoHS Pb GREEN Description The SP4040 provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationSP3050 Lead-Free/Green Series
RoHS Pb GREEN Description The SP3050 integrates low capacitance rail-to-rail diodes with an additional zener diode to protect each I/O pin against ESD and high surge events. This robust device can safely
More informationSP3130 Series 0.3pF 10KV Bidirectional Discrete TVS
SP313 Series.3p 1KV Bidirectional Discrete VS RoHS Pb GRN Description he SP313 includes back-to-back VS diodes fabricated in a proprietary silicon avalanche technology to provide protection for electronic
More informationThe ESD5451R is available in DFP1006-2L package. Standard products are Pb-free and Halogen-free. Circuit diagram
1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to protect sensitive
More informationTVS Diode Arrays (SPA Devices) TVS Diode Arrays. Low Capacitance ESD Protection - SP3012 Series. (SPA Devices) SP3012. SP 3012 xx U T G V * *
TVS Diode rrays (SP Devices) SP312 Series.5pF Diode rray RoHS Pb GRN Description Pinout The SP312 integrates either 4 or 6 channels of ultra low capacitance rail-to-rail diodes and an additional zener
More informationESD5651N ESD5651N. Descriptions. Features. Applications. Order information. Pin1. Pin2. 4.5V, Single Li-ion Battery Port Surge Protector
4.5V, Single Li-ion Battery Port Surge Protector http//:www.sh-willsemi.com Descriptions The is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to protect sensitive electronic
More information6V8 * ESDA6V8UD ESDA6V8UD. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) array designed to
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The is an ultra low capacitance TVS array designed to potect the gigabit network hundred meters transport port.this series has been
More informationEAYW ESD5425E ESD5425E. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect high
More information3 * ESD5302N ESD5302N. Descriptions. Features. Applications. Order information. http//:
2-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) array designed to
More informationESD9N12BA ESD9N12BA. Descriptions. Features. Applications. Order information. http//:
1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ES9N12BA is a TVS (Transient Voltage Suppressor) designed to protect sensitive electronic components which
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER LBD8CXXL01 series
Product specification ecember 18, 18 V. ATA SHEET ELECTROSTATIC ISCHARGE PROTECTION EVICES INUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic ischarged Protection evices (ES) ata
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT23AXXL02 series
Product specification December 19, 218 V. DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT2AXXL2 series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection
More information5V 4 * 1 5 ESD5344D ESD5344D. Descriptions. Features. Order information. Applications. http//:www.sh-willsemi.com
ESD5344D 4-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ESD5344D is an ultra-low capacitance TVS (Transient Voltage Suppressor)
More informationPESDSC2FD5VB ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationPESDAWC236T5VU Low Capacitance TVS Array
Low Capacitance TVS Array Description The is low capacitance transient voltage suppressor 6 5 4 array for high speed data interface that designed to protect sensitive electronics from damage or latch-up
More informationESD5311X ESD5311X 1-Line, Bi-directional, Ultra-low Capacitance http//: Transient Voltage Suppressors Descriptions
1-Line, Bi-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) designed to protect high
More informationPESDHC5D7VU ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER SDD32A05L01 series
Product specification November 7, 218 V. ATA SHEET ELECTROSTATIC ISCHARGE PROTECTION EVICES INUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 escription Electrostatic ischarged Protection evices
More informationTVS Diode Arrays (SPA Diodes) SP725 Series 5pF 8kV Diode Array. General Purpose ESD Protection - SP725 Series. RoHS Pb GREEN.
SP725 Series 5pF 8kV Diode Array RoHS Pb GREEN Description The SP725 is an array of SR/Diode bipolar structures for ESD and overvoltage protection of sensitive input circuits. The SP725 has 2 protection
More informationTVS Diode Arrays (SPA Diodes) SP725 Series 5pF 8kV Diode Array. General Purpose ESD Protection - SP725 Series. RoHS Pb GREEN.
SP725 Series 5pF 8kV Diode Array RoHS Pb GREEN Description The SP725 is an array of SR/Diode bipolar structures for ESD and overvoltage protection of sensitive input circuits. The SP725 has 2 protection
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSR70 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The has been specifically designed to protect sensitive components which are connected to data and transmission
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s UDT23AXXL02 series are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series
More informationLCDA15-1. Low Capacitance TVS Diode Array PRELIMINARY Features. PROTECTION PRODUCTS Description. Mechanical Characteristics.
Description The is a low capacitance transient voltage suppressor (TVS) diode array. It is designed to protect sensitive CMOS ICs from the damaging effects of ESD and lightning. Each device will protect
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationLCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional
Transient Suppression Diodes LCE Series RoHS Pb e3 Uni-directional Description The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationBidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD Protection Diode in SOT-23
VCAN26A2-3S Bidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD Protection Diode in SOT-23 FEATURES 3 For CAN and FLEX-Bus applications Small SOT-23 package AEC-Q1 qualified available 1 2 22742
More informationESD Protection Diode in LLP1006-2L
ESD Protection Diode in LLP6-2L 2 1 2856 MARKING (example only) XY Bar = cathode marking X = date code Y = type code (see table below) 21121 2855 DESIGN SUPPORT TOOLS click logo to get started FEATURES
More informationPARAMETER SYMBOL TESD5V0V4UA UNIT Marking code on the device
V WM =5V,.8pF ESD Protection Array FEATURES Meet IEC61-4-2(ESD) ±17kV(air), ±12kV(contact) Working Voltage: 5V Compliant to RoHS directive 211/65/EU and in accordance to WEEE 22/96/EC Halogen-free according
More informationBidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD-Protection Diode in SOT-323
VCAN26A2-3G Bidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD-Protection Diode in SOT-323 3 1 2 22742 MARKING (example only) 22743 WW VY ABC ABC = type code (see table below) WW = date code
More informationPESDLC23T5VU Low Capacitance ESD Protector
Low Capacitance ESD Protector Description The is a TVS designed to protect I/O or data lines from the damaging effects of ESD. It is low capacitance transient voltage suppressors for high speed data interface
More informationGBLC05CDN - GBLC24CDN
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The GBLCxxCDN Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and SMART phones.
More informationPAM1LIN 200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION The is an asymmetrical line protection transient voltage suppressor array, designed for local interconnect network (LIN) bus protection. This
More informationGBLC03 - GBLC24C. This datasheet has been downloaded from at this page
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationQualified for industrial applications according to the relevant tests of JEDEC47/20/22
TVS (Transient Voltage Suppressor) Bi-directional,. V,.8 pf, 2, RoHS and Halogen Free compliant Features ESD / transient protection according to: - IEC6-4-2 (ESD): ±8 kv (air), ± kv (contact discharge)
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationL02U5V0MA-6C. STAND-OFF VOLTAGE 5.0 Volts POWER DISSIPATION - 20 Watts ESD PROTECTION DIODE SLP4120P10
/. L2U5VMA-6C GENERAL DESCRIPTION ESD PROTECTION DIODE The L2U5VMA-6C is ultra low capacitance TVS arrays designed to protect high Speed data interfaces. This Series has been specifically designed to protect
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency Pinout Designation Line in Ground Line in Schematic Symbol Line In (1 -Bias
More informationPSMDA05C-4 - PSMDA24C-4
500 WATT MULTI-LINE TVS ARRAY DESCRIPTION The PSMDAxxC-4 Series are monolithic transient voltage suppressor arrays that provide board level protection for standard TTL and MOS bus line applications against
More informationPAM08SD23xx/C Series HIGH POWERED TVS ARRAYS DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
HIGH POWERED TVS ARRAYS DESCRIPTION The are transient voltage suppressor arrays designed for ESD protection of automotive applications. These silicon based diodes offer superior clamping voltage and performance
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationPLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description
RoHS Description The open LED protector provides a switching electronic shunt path when a single LED in an LED string fails as an open circuit. This ensures the entire LED string will continue to function
More informationSMDB712C BIDIRECTIONAL ASYMMETRICAL TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
BIDIRECTIONAL ASYMMETRICAL TVS ARRAY DESCRIPTION The offers four individual asymmetrical devices in a SO-8 package. The device can be configured for 2 or 4 datalines depending on power level requirements.
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSLVDA2.8LC. 600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY Description The is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency gency ile Number The new SEP (SIDCtor Thyristor Ethernet/PoE Protector series
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationVBUS054B-HS3 VBUS054B-HS3-GS Molding compound flammability rating. Weight
VBUS54B-HS3 4-Line BUS-port ESD-protection Features Ultra compact LLP75-6A package 4-line USB ESD-protection Low leakage current Low load capacitance C D =.8 pf ESD-protection to IEC 61-4-2 ± 15 kv contact
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Balanced Series - MS-013. Description
SIDCtor Balanced Series - MS- RoHS Pb e Description The SIDCtor Balanced Series MS- are designed to protect baseband equipment from overvoltage transients. The patented Y configuration ensures balanced
More informationPSD0561 HIGH POWERED SURGE PROTECTION TVS ARRAY DESCRIPTION DFN-2 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
HIGH POWERED SURGE PROTECTION TVS ARRAY DESCRIPTION The is a transient voltage suppressor array, designed to protect sensitive electronics from damage or latchup due to EOS, lightning, CDE and ESD. This
More informationTVS Diode Arrays (SPA Diodes) SP723 Series 5pF 8kV Diode Array. General Purpose ESD Protection - SP723 Series. RoHS Pb GREEN.
SP723 Series 5pF 8kV Diode Array RoHS Pb GREEN Description The SP723 is an array of SR/Diode bipolar structures for ESD and over-voltage protection of sensitive input circuits. The SP723 has 2 protection
More informationP4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationESDARF02-1BU2CK. Single-line bidirectional ESD protection for high speed interface. Features. Applications. Description
Single-line bidirectional ESD protection for high speed interface Features Datasheet production data Bidirectional device Extra low diode capacitance: 0.2 pf Low leakage current 0201 SMD package size compatible
More informationPAM02SD23xx/C Series ULTRA LOW CAPACITANCE TVS ARRAYS DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
ULTRA LOW CAPACITANCE TVS ARRAYS DESCRIPTION The are ultra low capacitance transient voltage suppressor arrays, designed to protect automotive applications. These devices are available in either a unidirectional
More informationLow Capacitance ESD Protection Diodes for High-Speed Data Interfaces FEATURES
www.vishay.com Low Capacitance ESD Protection Diodes for High-Speed Data Interfaces FEATURES 2 746 MARKING (example only) XX 2052 YYY XX Bar = cathode marking YYY = type code (see table below) XX = date
More information4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 4 3 1 2 MARKING (example only) 21483 21482 XY Dot = pin 1 marking X = date code Y = type code (see table below) 20932 FEATURES Ultra compact LLP1010-L package Low package
More informationSLVU WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
600 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such
More informationSR2.8 - SR3.3. ultra low capacitance steering diode/tvs array. Description. applications
ultra low capacitance steering diode/tvs array Description The SR series offers two low voltage (2.8V & 3.3V) and low capacitance steering diode TVS arrays. This series is designed to protect two line
More informationGBLC03 - GBLC24C ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More information4-Channel LCR - EMI-Filter with ESD-Protection VEMI45LA-HNH VEMI45LA-HNH-G Molding compound flammability rating
-Channel LCR - EMI-Filter with ESD-Protection VEMILA-HNH Features Ultra compact LLP7-9L package Low package profile of. mm -channel LC EMI-filter Low leakage current Line inductance L S = nh Low line resistance
More information4-Channel EMI-Filter with ESD-Protection FEATURES VEMI45AA-HNH VEMI45AA-HNH-GS MOLDING COMPOUND FLAMMABILITY RATING
4-Channel EMI-Filter with ESD-Protection 2383 8 7 6 5 9 1 2 3 4 MARKING (example only) Dot = pin 1 marking Y = type code (see table below) XX = date code 2522 YXX 2719 FEATURES Ultra compact LLP1713-9L
More informationPSRDAxx-4A Series 500 WATT LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The are low capacitance multi-line steering diode/transient voltage suppressor arrays that provides board level protection for standard TTL
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. MC Multiport Series - MS-013. Description
MC Multiport Series - MS-13 RoHS Pb e3 Description The MC Multiport Series MS-13 are low capacitance SIDCtor thyristors designed to protect broadband equipment from damaging overvoltage transients. The
More information6-Channel EMI-Filter with ESD-Protection FEATURES VEMI65AC-HCI VEMI65AC-HCI-GS MOLDING COMPOUND FLAMMABILITY RATING
6-Channel EMI-Filter with ESD-Protection 12 11 9 8 7 13 1 2 3 4 5 6 2378 21839 MARKING (example only) YYXX 272 FEATURES Ultra compact LLP2513-13L package Low package profile of.6 mm 6-channel EMI-filter
More information3-Channel EMI-Filter with ESD-Protection
3-Channel EMI-Filter with ESD-Protection 6 5 4 7 2 3 9423 MARKING (example only) 257 XX YY Dot = pin marking YY = type code (see table below) XX = date code 2 FEATURES Ultra compact LLP75-7L package 3-channel
More informationQualified for industrial applications according to the relevant tests of JEDEC47/20/22
TVS (Transient Voltage Suppressor) Bi-directional, 3.3 V, 6. pf, 2, RoHS and Halogen Free compliant Feature list ESD/transient protection according to: - IEC6-4-2 (ESD): ±8 kv (air/contact discharge) -
More informationESD051-1F4. Low clamping single line unidirectional ESD. Datasheet. Features. Application. Description
Datasheet Low clamping single line unidirectional ESD Features ST0201 package Low clamping voltage: -3 V / +9 V (IEC 61000-4-2 contact discharge at 30 ns) Unidirectional diode Low leakage current 0201
More informationWE05MF. 2 SOT-553 (Top View) Features IEC COMPATIBILITY (EN ) Tel: Transient Voltage Suppressor SOT-553
Document: W030044, Rev: A Transient Voltage Suppressor Features Solid-state silicon-avalanche technology 30 Watts Peak Pulse Power per Line (t p =8/20μs) Low operating and clamping voltages Up to Four
More informationLow Capacitance ESD Protection Diodes for High-Speed Data Interfaces FEATURES
www.vishay.com Low Capacitance ESD Protection Diodes for High-Speed Data Interfaces 2 746 MARKING (example only) XX 2052 YYY XX Bar = cathode marking YYY = type code (see table below) XX = date code 2057
More informationSR2.8 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data
More information