OP800SL Series, OP800WSL Series OP830SL Series, OP830WSL Series

Size: px

Start display at page:

Download "OP800SL Series, OP800WSL Series OP830SL Series, OP830WSL Series"

Junior O’Connor’
6 years ago
Views:

OP80SL Series, OP80WSL Series Features: TO8 hermetically sealed package Mechanically and spectrally matched to OP0 and OP20 LEDs TX and TXV process available (see HiRel section) Choice of narrow or

TO8 package that offers high power dissipation and superior hostile environment operation.

The OP800WSL, OP80WSL, OP802WSL and OP80WSL all have a wide receiving angle that provides relatively even reception over a large area.

1 OP80SL Series, OP80WSL Series Features: TO8 hermetically sealed package Mechanically and spectrally matched to OP0 and OP20 LEDs TX and TXV process available (see HiRel section) Choice of narrow or wide receiving angle Variety of sensitivity ranges Enhanced temperature range WSL Description: Each device in this series consists of a NPN silicon phototransistor mounted in a hermetically sealed TO8 package that offers high power dissipation and superior hostile environment operation. The OP800SL and OP80SL devices have a narrow receiving angle that provides excellent onaxis coupling and a bonded base lead that enables conventional transistor biasing. The OP800WSL, OP80WSL, OP802WSL and OP80WSL all have a wide receiving angle that provides relatively even reception over a large area. Devices are 00% production tested using an infrared light source for close correlation with OPTEK s GaAs and GaAIAs emitters. The OP800SL and devices are mechanically and spectrally matched to OP0 and OP20 series LEDs. The OP800WSL devices are mechanically and spectrally matched to OP0W and OP20W series devices. Please refer to Application Bulletins 208 and 20 for additional design information and reliability (degradation) data. Applications: Spacelimited applications Hostile environment applications Applications requiring high power dissipation Part Number Guide OPXXX OP X X X X X X OPTEK Component 8 TO8 Package PillPack Dome Lens 6 PillPack Short Lens SL Tested at 2970 K WSL Tested at 2970 K Part Description: Power Refins OP80 SL OP80 WSL OP80SL OP80WSL = TO8 dome lens, phototransistor 0 through 5 sensitivity levels tested with 2870 K light source = Pillpack flat lens, phototransistor 0 through 2 sensitivity levels tested with 2870 K light source = TO8 dome lens, photodarlington tested with 2870 K light source = TO8 flat lens, photodarlington tested with 2870 K light source RoHS Issue A 0/206 Page

2 OP80SL Series, OP80WSL Series OP800SL, OP80SL OP800SL Series Collector Base 2 NPN Trans. Emitter OP80SL [MILLIMETERS] DIMENSIONS ARE IN: INCHES X THIS DIMENSIOIN CONTROLLED AT HOUSING SUR Pin # OP80X _ OP80 _ Collector Collector 2 Base Emitter Emitter OP800WSL, OP80WSL OP80WSL [MILLIMETERS] DIMENSIONS ARE IN: INCHES X THIS DIMENSIOIN CONTROLLED AT HOUSING SUR OP800WSLSeries Issue A 08/206 Page 2

3 OP80SL Series, OP80WSL Series Electrical Specifications Absolute Maximum Ratings (T A = 25 C unless otherwise noted) Storage Temperature Range Operating Temperature Range CollectorBase Voltage (applies to OP800SL only does not apply to OP800WSL) CollectorEmitter Voltage OP800 (SL, WSL) OP80 (SL, WSL) EmitterBase Voltage (applies to OP800 (SL, WSL) only) EmitterCollector Voltage (applies to all OP800 and OP80 devices) Continuous Collector Current 65 o C to +50 o C 65 o C to +25 o C 0 V 0 V 5 V 5 V 5 V 50 ma Lead Soldering Temperature [/6 inch (.6 mm) from case for 5 seconds with soldering iron] 260 C () Power Dissipation 250 mw (2) Notes:. RMA flux is recommended. Duration can be extended to 0 seconds maximum when flow soldering. A maximum 20 grams force may be applied to the leads when soldering. 2. Derate linearly 2.5 mw/ C above 25 C.. Junction temperature maintained at 25 C. Issue A 08/206 Page

4 OP80SL Series, OP80WSL Series Electrical Characteristics (T A = 25 C unless otherwise noted) Electrical Specifications SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS I C(ON) () OnState Collector Current OP800SL OP80SL OP802SL OP80SL OP804SL OP805SL OP800WSL OP80WSL OP802WSL ma 2(4 )(5) V CE = 5 V, E E = 5 mw/cm I CEO V (BR)CEO V (BR)CBO OP80SL OP80WSL Collector Dark Current OP800 (SL, WSL) OP80 (SL, WSL) CollectorEmitter Breakdown Voltage OP800 (SL, WSL) OP80 (SL, WSL) CollectorBase Breakdown Voltage [applies to OP800SL only] V CE = 5 V, E E = 0.5 mw/cm 2(5) na V CE = 0 V, E E = 0 V I C = 00 µa 0 V I C = 00 µa V (BR)ECO EmitterCollector Breakdown Voltage 5.0 V I E = 00 µa V (BR)EBO V CE(SAT) () EmitterBase Breakdown Voltage [applies to OP800SL only] CollectorEmitter Saturation Voltage OP800WSL OP800SL OP80SL OP80WSL 5.0 V I E = 00 µa V I C = 0.5 ma, E E = 0.5 mw/cm 2(4) I C = 0.4 ma, E E = 5 mw/cm 2(5) I C = 0.5 ma, E E = 0.5 mw/cm 2(5) I C =.0 ma, E E = 0.5 mw/cm 2(5) t r Rise Time 7 µs V CC = 5 V, I C = 0.80 ma, t f Fall Time 7 µs R L = 00 Ω (See Test Circuit) Issue A 08/206 Page 4

5 OP80SL Series, OP80WSL Series Performance OP800SL Series Issue A 08/206 Page 5

6 OP80SL Series, OP80WSL Series Performance OP800WSL Series Issue A 08/206 Page 6

7 OP80SL Series, OP80WSL Series Performance OP80SL Series Issue A 08/206 Page 7

8 OP80SL Series, OP80WSL Series Performance OP80WSL Series Issue A 08/206 Page 8

9 OP80SL Series, OP80WSL Series Issue Change Description Approval Date Initial Release June 996 A Combined the OP800SL, WSL, OP80SL & WSL Series datasheets in Put in new TT Electronics format in /2/06 Issue A 08/206 Page 9

OP505, OP506, OP535 & OP705 Series

OP505, OP506, OP535 & OP705 Series OP505, OP535, OP705 Features: T1 package style Variety of sensitivity ranges Choice of narrow or wide receiving angle Small package size ideal for spacelimited applications 0.050 [1.27mm] or 0.100 [2.54mm]