OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages
|
|
|
- Hilda Floyd
- 5 years ago
- Views:
Transcription
1 Features: 2,500 or 3,750 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photo Darlington Sensor Lowcost plastic DualInLine (DIP) package Agency Approvals: UL Certification No: E58730 VDE No: (OPIA401404), (OPIA405409) Description: The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or Photodarlington) in a surface mount package. A wide selection of configurations are available. With typical isolation voltage of 2,500 or 3,750 Volts(RMS), these products meet typical power system isolation requirements. Theory of operation: The LED transmitter is used to illuminate the Photo sensor providing electrical isolation between two power systems while maintaining the ability to transmit information from one power system to the other. In many applications, analog signal levels may be required to be transmitted between two power systems while maintaining isolation between the power systems up to 3,750 Volts(RMS). A variety of LED and photo sensor configurations are available depending on the system requirements. The Current Transfer Ratio (CTR) is determined using the output current and input current for analog photo sensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device. CTR = Photosensor Current LED Current = 20mA *100 = mA All SMD products are shipped in a shipping tube with TR identified on the end of the part number. Example: OPI401ATRE is a 4Pin SMD shipped in tape and reel (TR) Applications: High voltage isolation: 2,500 or 3,750 Volts(RMS) PCBoard power system isolation Industrial equipment power isolation Medical equipment power isolation Office equipment RoHS Phone: (972) or (800) FAX: (972) sensors@optekinc.com Page 1 of 31
2 Package Outline Dimensions and Schematics: TopView Package Style C (SSOP) Package Style B (SOP) Part Number Pin # Package Style A (SMD) OPIA401B A K E C OPIA402B AK KA E C OPIA403B A K E C OPIA404B A K E C OPIA405C A E C OPIA406C A K E C OPIA407C AK KA E C OPIA408C A K E C OPIA409C A K E C OPIA414B A K E C Page 2 of 31 Phone: (972) or (800) FAX: (972) sensors@optekinc.com
3 Part Number Analog Output Devices Ordering Information Isolation Voltage Max. (Vrms) CTR Min/Typ/Max Typ. Tr / Tf (µs) R L = 100 ohms Package Configuration OPIA401B 3,750 1,000 / / 100 / 20 4Pin SOP A K C E (Dar) OPIA402B 3, / / 3 4Pin SOP A K, K A C E OPIA403B 3, / 1,600 / 7, / 53 4Pin SOP A K C E (Dar) OPIA404B 3, / / / 4 4Pin SOP A K C E OPIA405CxxA 2, / / / 5 4Pin SSOP A K C E OPIA405CxxB 2, / / / 5 4Pin SSOP A K C E OPIA405CxxC 2, / / / 5 4Pin SSOP A K C E OPIA405CxxD 2, / / / 5 4Pin SSOP A K C E OPIA405CxxE 2, / / / 5 4Pin SSOP AK CE OPIA406C 2, / 2,000 / 200 / 200 4Pin SSOP A K C E (Dar) OPIA407CxxE 2, / / / 5 4Pin SSOP A K, K A C E OPIA408C 2, / 2,000 / 200 / 200 4Pin SSOP A K C E (Dar) OPIA409C 2, / 2, / 10 4Pin SSOP A K C E (Dar) OPIA414B 3, / / / 3 4Pin SOP A K C E Configuration: Definition of Terms LED Identification Sensor Identification Configuration Information LED A = Anode K = Cathode Sensor B = Base C = Collector E = Emitter (Dar) = Photodarlington Packaging Part Number Suffix: TU = Shipped in Tubes TR = Tape & Reel Example: OPIA405CTUE Phone: (972) or (800) FAX: (972) sensors@optekinc.com Page 3 of 31
4 Absolute Maximum Ratings (T A = 25 o C unless otherwise noted) Storage Temperature OPIA404, OPIA414 OPIA401, OPIA402, OPIA403 OPIA405, OPIA406, OPIA407, OPIA408, OPIA409 Operating Temperature All except the part numbers noted below OPIA404 OPIA414 Isolation voltage (1 minute) OPIA400 OPIA401, OPIA402, OPIA403, OPIA404, OPIA414 OPIA405, OPIA406, OPIA407, OPIA408, OPIA409 Total Package Power Dissipation OPIA401, OPIA402, OPIA403, OPIA404, OPIA414 OPIA405 OPIA406, OPIA407, OPIA408, OPIA C to +125 C 40 C to +125 C 55 C to +150 C 30 C to +100 C 55 C to +115 C 30 C to +115 C 5,000 Vrms 3,750 Vrms 2,500 Vrms 170 mw 160 mw Lead Soldering Temperature (1/16 (1.6 mm) from case for 5 seconds with soldering iron) 260 C Input Diode Continuous Forward Current All except the part number noted below OPIA414 Peak Forward current (1 µs pulse width, 300 pps) All except the part number noted below OPIA414 Reverse Voltage OPIA401, OPIA403, OPIA404, OPIA405, OPIA406, OPIA409, OPIA414 OPIA402, OPIA407, OPIA408, OPIA409, OPIA410, OPIA412 Power Dissipation OPIA401, OPIA402, OPIA403, OPIA404 OPIA405, OPIA406, OPIA407, OPIA408, OPIA409 OPIA ma 10 ma 1 A 200 ma 6 V 70 mw 60 mw 15 mw Output Phototransistor CollectorEmitter Voltage OPIA402, OPIA404 OPIA401, OPIA409 OPIA403 OPIA406, OPIA408 OPIA405, OPIA407, OPIA414 EmitterCollector Voltage OPIA405, OPIA406, OPIA407, OPIA408 OPIA401 OPIA402, OPIA403, OPIA404 OPIA409 OPIA414 Collector Current OPIA402, OPIA404, OPIA405, OPIA407, OPIA414 OPIA401, OPIA403 OPIA406, OPIA408 OPIA409 Power Dissipation All except the part numbers noted below OPIA405, OPIA406, OPIA407, OPIA408, OPI V 300 V 35 V 40 V 80 V 6 V 0.1 V 5 V 0.3 V 7 V 50 ma 150 ma 90 ma 60 ma 150 mw 120 mw Page 4 of 31 Phone: (972) or (800) FAX: (972) sensors@optekinc.com
5 Electrical Characteristics SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode V F Forward Voltage All except those noted below OPIA404 OPIA405, OPIA406, OPIA407, OPIA408 OPIA401, OPIA409, OPIA V I F = 20 ma I F = 10 ma I F = 5 ma I F = 10 ma I V FM Peek Forward Voltage OPIA403 OPIA405 OPI401, OPIA404, OPIA414, OPIA406, OPIA407, OPIA408, OPIA V I FM = 500 ma Reverse Current I R All except those noted below OPIA404, OPIA407, OPIA408, OPIA414 OPIA405, OPIA406, OPIA µa V R = 4 V V R = 5 V C t Terminal Capacitance All except those noted below OPIA402, OPIA404, OPIA414 OPIA408, OPIA pf V = 0.0 V, f = 1K Hz V = 0.0 V, f = 1K Hz V = 0.0 V, f = 1M Hz Output Phototransistor I CEO Collector dark Current OPIA400, OPIA402, OPIA404 OPIA405, OPIA407 OPIA na I F = 0 ma, V CE = 20 V I F = 0 ma, V CE = 80 V I F = 0 ma, V CE = 50 V V CE(SAT) Collectoremitter Saturation Voltage OPIA405, OPIA407 OPIA402, OPIA404, OPIA410 OPIA V I F = 10 ma, I C = 2 ma I F = 20 ma, I C = 1 ma I F = 10 ma, I C = 1 ma f C CuttOff frequency All except those noted below K Hz V CC = 5 V, I C = 2 ma, R L = 100 Ω t R Rise Time OPIA402, OPIA414 OPIA405, OPIA407 OPIA µs V CC = 2 V, I C = 2 ma, R L = 100 Ω V CC = 5 V, I C = 2 ma, R L = 100 Ω V CC = 2 V, I C = 2 ma, R L = 100 Ω t F Fall Time OPIA402, OPIA414 OPIA405, OPIA407 OPIA µs V CC = 2 V, I C = 2 ma, R L = 100 Ω V CC = 5 V, I C = 2 ma, R L = 100 Ω V CC = 2 V, I C = 2 ma, R L = 100 Ω Continued on Next Page Phone: (972) or (800) FAX: (972) sensors@optekinc.com Page 5 of 31
6 Electrical Characteristics (OPIA400 Series) Continued from Previous Page SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Output PhotoDarlington I CEO Collector dark Current OPIA401 OPIA403 OPIA406, OPIA408 OPIA µa I F = 0 ma, V CE = 200 V I F = 0 ma, V CE = 10 V I F = 0 ma, V CE = 40 V I F = 0 ma, V CE = 300 V V CE(SAT) Collectoremitter Saturation Voltage OPIA403 OPIA406, OPIA408, OPIA409 OPIA V I F = 20 ma, I C = 1 ma I F = 1 ma, I C = 2 ma I F = 20 ma, I C = 100 ma f C CutOff frequency OPIA401, OPIA406, OPIA408, OPIA409 OPIA K Hz V CC = 5 V, I C = 2 ma, R L = 100 Ω t R Rise Time OPIA401 OPIA403 OPIA406, OPIA408 OPIA µs V CC = 2 V, I C = 20 ma, R L = 100 Ω V CC = 2 V, I C = 2 ma, R L = 100 Ω V CC = 5 V, I C = 2 ma, R L = 100 Ω V CC = 5 V, I C = 10 ma, R L = 100 Ω t F Fall Time OPIA401 OPIA403 OPIA406, OPIA408 OPIA µs V CC = 2 V, I C = 20 ma, R L = 100 Ω V CC = 2 V, I C = 2 ma, R L = 100 Ω V CC = 5 V, I C = 2 ma, R L = 100 Ω V CC = 5 V, I C = 10 ma, R L = 100 Ω Coupled Characteristics CTR Current Transfer Ratio OPIA404 OPIA401 OPIA402 OPIA403 OPIA405(See Table, page 3) OPIA406, OPIA408 OPIA407 OPIA409 OPIA , , , , % I F = 5.00 ma, V CE = 5.0 V I F = 1.00 ma, V CE = 2.0 V I F = 1.00 ma, V CE = 5.0 V I F = 1.00 ma, V CE = 2.0 V I F = 5.00 ma, V CE = 5.0 V I F = 1.00 ma, V CE = 2.0 V I F = 5.00 ma, V CE = 5.0 V I F = 1.00 ma, V CE = 2.0 V I F = 1.00 ma, V CE = 5.0 V C f Floating Capacitance OPIA405, OPIA406, OPIA407, OPIA408, OPIA pf V = 0.0 V, f = 1M Hz R ISO Isolation resistance 5X ohm C500V, 40% to 60%RH Page 6 of 31 Phone: (972) or (800) FAX: (972) sensors@optekinc.com
7 OPIA401 Phone: (972) or (800) FAX: (972) Page 7 of 31
8 OPIA401 Forward Current IF(mA) Page 8 of 31 Phone: (972) or (800) FAX: (972) sensors@optekinc.com
9 OPIA402 Phone: (972) or (800) FAX: (972) Page 9 of 31
10 OPIA402 Page 10 of 31 Phone: (972) or (800) FAX: (972)
11 OPIA403 Phone: (972) or (800) FAX: (972) Page 11 of 31
12 OPIA403 Forward Current I F(mA) Page 12 of 31 Phone: (972) or (800) FAX: (972) sensors@optekinc.com
13 OPIA404 Phone: (972) or (800) FAX: (972) Page 13 of 31
14 OPIA404 Page 14 of 31 Phone: (972) or (800) FAX: (972)
15 OPIA405 Phone: (972) or (800) FAX: (972) Page 15 of 31
16 OPIA405 Page 16 of 31 Phone: (972) or (800) FAX: (972)
17 OPIA406 Phone: (972) or (800) FAX: (972) Page 17 of 31
18 OPIA406 Forward Current IF(mA) Page 18 of 31 Phone: (972) or (800) FAX: (972)
19 OPIA407 Phone: (972) or (800) FAX: (972) Page 19 of 31
20 OPIA407 Page 20 of 31 Phone: (972) or (800) FAX: (972)
21 OPIA408 Phone: (972) or (800) FAX: (972) Page 21 of 31
22 OPIA408 Forward Current IF(mA) Page 22 of 31 Phone: (972) or (800) FAX: (972)
23 OPIA409 Phone: (972) or (800) FAX: (972) Page 23 of 31
24 OPIA409 Page 24 of 31 Phone: (972) or (800) FAX: (972)
25 OPIA414 Phone: (972) or (800) FAX: (972) Page 25 of 31
26 OPIA414 Page 26 of 31 Phone: (972) or (800) FAX: (972)
27 Quality / Reliability Requirements HTRB D I C(OFF) Parameter Failure Criteria Conditions Note: This is to be performed when a change occurs to form, fit or function. ± 10% 11 samples after 500Hrs 0 VCE = 5.0VDC, Ta = 70 C HTFB D I C(ON) ± 10% 50 samples after 96Hrs 0 Max P D, Ta = 25 C 90% confidence 150, C, 25mADC Moisture Sensitivity Level MSL 1 per JDEC stnd JSTD020B Lead Solderability 0 Fail per Method 208 of MILSTD202. Glass Transition of body 125 C Min. DSC test method Temperature HumidityBias ± 20% 85 C, 85%RH, 500Hrs, 80% min Iceo Temperature Cycle ± 20% per Method of MILSTD883E High Temperature Storage ± 20% 85 C, 500Hrs Autoclave 0 Fail Government and Industry Standard Compliance Requirements T A = 121 C, Pressure = 15psi, Humidity = 100%, Time = 96Hrs European Union s Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC Label Identification DESCRIPTION: Size: 3 (7.4 cm) X 2.2 (5.5 cm) Lettering shall be black on white background. Format shall be as: Notes: 1. The DATE CODE is a 4digit code for date of manufacture where YY is the last two digits of the year, and WW is week number of manufacture. 2. The LOT I.D. is the manufacturing location lot identification where Y is the year of manufacture, NNNN is a sequential lot identifier, and DDD is the day of the year of manufacture. or use equivalent label format. Carrollton, TX, USA MADE IN TAIWAN OPTEK P/N OPIA407CTR IIIIIIIIIIIIIIIIIIIII QTY. N/A IIIIIIIIIIIIIIIIIIIII DATE CODE (YYWW) IIIIIIIIIIIIIIIIIIIII LOT I.D. (YNNNNDDD) IIIIIIIIIIIIIIIIIIIII Phone: (972) or (800) FAX: (972) sensors@optekinc.com Page 27 of 31
28 Tube Packaging Information: Optek's Optocoupler Part Numbers Packaging Quantities Qty Tube Inner Small Carton Medium Carton Large Carton Weight 52 x 7 x 7.5 cm 53.5 x 16 x 17.5 cm Qty Weight Qty Weight Gross Weight 53.5 x 30.7 x 17.5 cm Qty Weight Gross Weight 53.5 x 30.7 x 25 cm Qty Gross Weight Weig ht P/H and SMD M/F SOP 4PIN OPIA400D/A 6PIN OPIA6XXD/A Series 8PIN OPIA8XXD Series and OPID804D 4PIN and 5PIN OPIA401B OPIA404B, OPIA414B, OPIA500B SSOP 4PIN OPIA405C OPIA409C , , , , , , , , , , , , , , , , ,200 P/H = PinHole Packages (Referred as D = DualInLine Package) SMD = Standard Surface Mount Packages (Referred as A = 6.5mil SMD) M/F or SOP = MiniFlat Packages or Small Outside Packages (Referred as B = 4.40mil SMD w/ 2.54mil Lead Spacing) SSOP = Shrink SOP Packages (Referred as C = 3.60mil SMD with 1.27mil LeadSpacing) Page 28 of 31 Phone: (972) or (800) FAX: (972) sensors@optekinc.com
29 Tube Packaging Specifications SMD (TU): DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: ± INCHES [± 0.2 MILLIMETERS] Quantity: 4pin (SMD): 100pcs/tube Tube Packaging Specifications SOP (Miniflats) and SSOP (TU): Quantity: 4pin (SOP): 100pcs/tube 4pin (SSOP): 170pcs/tube Phone: (972) or (800) FAX: (972) Page 29 of 31
30 Tape and Reel Packaging Specifications SMD and SOP (TR): Tape Feeder: Direction: Quantity: 4pin (SMD): 1000pcs/Reel 4pin (SOP): 1000pcs/Reel 4pin (SSOP): 3000pcs/Reel DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: ± INCHES [± 0.2 MILLIMETERS] Reel: Page 30 of 31 Phone: (972) or (800) FAX: (972)
31 Tape and Reel Packaging Specifications SSOP (TR):.157±0.008 [4.0±0.02 ].078±0.008 [2.0±0.02] Ø.059±0.004 [Ø1.50±0.05] 0.068±0.008 [1.75 ±0.02] Ø.059±0.004 [Ø1.50±0.05] 0.472±0.008 [12.0 ±0.02] 0.285±0.008 [7.25 ±0.02] 0.088±0.008 [2.25 ±0.02].157±0.008] [4.0±0.02].100±0.008 [2.55±0.02] Direction: DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: ± INCHES [± 0.2 MILLIMETERS] Reel: Ø.531±0.02 [Ø13.5±0.5] Ø.098±0.02 [2.5±0.5] Ø7.00±0.04 [Ø178±1.0] 2.36±0.04 [60±1.0] Ø.826±0.04 [Ø21±1.0].511±0.04 [13±0.5].629±0.04 [16.0±0.5] Quantity: 4pin (SSOP): 2000pcs/Reel Phone: (972) or (800) FAX: (972) Page 31 of 31
Optocoupler DIP Package OPIA400, OPIA410 through OPIA413
Features: 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photo Darlington Sensor Lowcost plastic DualInLine (DIP) package Approval Agency: UL Certification No: E58730
OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages
5 Pin Features: 3,750 or 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photo Darlington Sensor Lowcost plastic DualInLine (DIP) package Agency Approvals: UL Certification
OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package
Features: 3,750 or 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photodarlington Sensor Lowcost plastic DualInLine (DIP) package Agency Approvals: UL Certification
Optocoupler DIP Package OPIA600 through OPIA605
Features: 3,750 to 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photodarlington Sensor Lowcost plastic DualInLine (DIP) package Agency Approvals: UL Certification
Optocoupler SMD and SOP Types OPIA500, OPIA600 through OPIA605
Features: 2,500 to 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photodarlington Sensor Lowcost plastic DualInLine (DIP) package Agency Approvals: ML Certification
Optocoupler DIP Package OPIA500, OPIA600 through OPIA605
Features: 3,750 to 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photodarlington Sensor Lowcost plastic DualInLine (DIP) package Description: The OPIA series optocouplers
OPIA800 OPIA803, OPID804 DIP Package
Features: 2,500 or 5,000 Vrms electrical isolation Choice of a Single and Dual LED Choice of Phototransistor or Photologic Sensor Low-cost plastic Dual-In-Line (DIP) package Agency Approvals: UL Certification
Agilent 4N35 Phototransistor Optocoupler General Purpose Type
Agilent N3 Phototransistor Optocoupler General Purpose Type Data Sheet Description The N3 is an optocoupler for general purpose applications. It contains a light emitting diode optically coupled to a phototransistor.
Data Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Description
HCPL-8 Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-8
Data Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Features
HCPL-8 Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-8
4N25 Phototransistor Optocoupler General Purpose Type. Features
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
CNY17-X Series CNY17F-X Series 6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER. Features. Description. Applications
Features Current transfer ratios in selected narrow range groups CNY17-1, CNY17F-1: 40-80% CNY17-2, CNY17F-2: 63-125% CNY17-3, CNY17F-3: 100-200% CNY17-4, CNY17F-4:160-320% High isolation voltage between
4N2X Series 4N3X Series H11AX Series 6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER. Features: Description. Applications
Features: 4N2X series: 4N25, 4N26, 4N27, 4N28 4N3X series: 4N35, 4N36, 4N37, 4N38 H11AX series: H11A1, H11A2, H11A3, H11A4, H11A5 High isolation voltage between input and output (Viso=5000 V rms) Creepage
Q825 8-PIN DIP PHOTOTRANSISTOR OPTOCOUPLER Feature: UL recognized (File # E338132) Creepage distance > 7.62mm
Feature: Certification & Compliance: High Isolation voltage between input and output Pb free and RoHS Compliant (Viso = 5000V rms) UL recognized (File # E338132) Creepage distance > 7.62mm VDE recognized
EVERLIGHT ELETCRONICS CO., LTD
Features: Current transfer ratio (CTR:MIN.50% at I F =5mA,V CE =5V) High isolation voltage between input and output (V iso =5000 Vrms ) Compact dual-in-line package EL816:1-channel type Pb free UL approved
佰鴻工業股份有限公司. BPC-817S. Outline Dimensions. Features: Parameter Symbol Rating Unit
Features: 1. Current transfer ratio (CTR: MIN. 50% at I F =5mA, V CE =5V) 2. High input-output isolation voltage (V ISO =5,000Vrms) 3. Response time (tr: TYP. 4µs at V CE =2V, I C =2mA, R L =100 Ω) 4.
8 PIN SOP PHOTOTRANSISTOR DUAL CHANNEL PHOTOCOUPLER. ELD20X / 21X series. Features. Dual channel coupler. Description.
Features Dual channel coupler Current transfer ratios offered in narrow ranges ELD205: 40-80% ELD206: 63-125% ELD207: 100-200% ELD211: > 20% ELD213: > 100% ELD217: > 100% High isolation voltage between
SDD600-STR. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description The consists of a high voltage photo-darlington transistor optically coupled to a light emitting diode. Optical coupling between the input IR LED and output photo- Darlington allows for high
4 PIN SOP PHOTOTRANSISTOR AC INPUT PHOTOCOUPLER. EL3H4-G Series. Features: Description. Applications
Features: AC input response Current transfer ratio (CTR: Min. 20% at I F =±1mA,V CE =5V) High isolation voltage between input and output (Viso=3750 V rms ) Compact small outline package Pb free and RoHS
Silicon Phototransistor and Photo Darlington in 1210 SMD Package
in SMD Package OP,, OPF Features: High Speed and High photo sensitivity Fast response time package size High Current Gain Water clear and black lens choices Narrow Viewing Receiving Angle Compatible with
4 PIN DIP LOW INPUT PHOTOTRANSISTOR PHOTOCOUPLER EL8171-G Series
Schematic Features: Current transfer ratio (CTR: 50~300% at I F =0.5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up
佰鴻工業股份有限公司. BPC-817S. Features: Parameter Symbol Rating Unit
Features: 1. Current transfer ratio (CTR: MIN. 50% at I F =5mA, V CE =5V) Outline Dimensions 2. High input-output isolation voltage (V ISO =5,000Vrms) 3. Response time (tr: TYP. 4µs at V CE =2V, I C =2mA,
HIGH VOLTAGE PHOTODARLINGTON OPTOCOUPLERS
DESCRIPTION The HGX series are photodarlington-type optically coupled optocouplers. These devices have a gallium arsenide infrared emitting diode coupled with a silicon darlington connected phototransistor
4 PIN SOP PHOTOTRANSISTOR PHOTOCOUPLER. EL357 Series. Features: Description. Applications
Features: Current transfer ratio (CTR: 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=3750 V rms ) Compact small outline package Pb free and RoHS compliant. UL approved
4 PIN SOP HIGH VOLTAGE PHOTODARLINGTON PHOTOCOUPLER EL452-G Series
EL452-G Series Features: Halogens free High collect-emitter voltage (V CEO = 350V) Current transfer ratio (CTR: Min. 1000% at I F =1mA,V CE =2V) High isolation voltage between input and output (Viso=3750
4 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER. EL101X-G Series. Features: Description. Applications
Features: Free halogens compliant Current transfer ratio (CTR: 50~600% at I F =5mA, V CE =5V) (CTR: 63~320% at I F =10mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Compact
KP5010 Series. cosmo 6PIN PHOTODARLINGTON PHOTOCOUPLER. Schematic. Description. Features. Applications
Description Schematic The KP51 series consist of a photodarlington optically coupled to a gallium arsenide infrared-emitting 1 6 diode in a 6-pin DIP package and available in wide-lead spacing and SMD
H11G1M, H11G2M 6-Pin DIP High Voltage Photodarlington Optocouplers
HGM, HG2M 6-Pin DIP High Voltage Photodarlington Optocouplers Features High BV CEO : 00 V Minimum for HGM 80 V Minimum for HG2M High Sensitivity to Low Input Current (Minimum 500% CTR at I F = ma) Low
4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL814 Series
Schematic Features: AC input response Current transfer ratio (CTR: Min. 20% at I F =±1mA,V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Wide Operating temperature range -55~110ºC
4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER
Features: Current transfer ratio (CTR: 50~600% at I F =5mA, V CE =5V) (CTR: 63~320% at I F =10mA, V CE =5V) High isolation voltage between inputs and output (Viso=5000 V rms) Creepage distance >7.62 mm
Product: Q814 Date: February 1, 2011 Page 1 of 13 Version# 1.2
Feature: High Isolation voltage between input and output (Viso = 5000V rms) Current transfer ration (CTR: Min. 20% at I F = ±1mA, V ce =5V) High collector-emitter voltage V CEO =80V Operating Temperature
6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER 4N2X Series 4N3X Series H11AX Series
Schematic Features: 4N2X series: 4N25, 4N26, 4N27, 4N28 4N3X series: 4N35, 4N36, 4N37, 4N38 H11AX series: H11A1, H11A2, H11A3, H11A4, H11A5 High isolation voltage between input and output (Viso=5000 V
High Collector-Emitter Voltage Type Photocoupler
High Collector-Emitter oltage Type Photocoupler CNY17 Series Features High collector-emitter voltage ( CEO : ) High input-output isolation voltage : ( ISO : 5,000rms ) Directly connectable to TTL UL approved
4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER. EL2501-G Series. Features: Description. Applications
Features: Halogens free. Current transfer ratio (CTR: 80~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature
Description. Applications. Features: 1. Anode 2. Cathode 3. Emitter 4. Collector. between input and outpu.
4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL817 Series Schematic Features: Current transfer ratio (CTR: 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and outpu (Viso=5000 V rms ) Creepagee
6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER 4N2X Series 4N3X Series H11AX Series
Schematic Features: 4N2X seriesn25, 4N26, 4N27, 4N28 4N3X seriesn35, 4N36, 4N37, 4N38 H11AX series: H11A1, H11A2, H11A3, H11A4, H11A5 High isolation voltage between input and output (Viso=5000 V rms) Creepage
DaPeng Elec-tech Co.,Ltd
Features: Current transfer ratio (CTR: 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
8 PIN SOP PHOTOTRANSISTOR DUAL CHANNEL PHOTOCOUPLER ELD20X Series ELD21X Series
Schematic Features: Dual channel coupler Current transfer ratios offered in narrow ranges ELD205: 40-80% ELD211: >20% ELD206: 63-125% ELD213: >100% ELD207: 100-200% ELD217: >100% High isolation voltage
K2010 Series. cosmo 6PIN PHOTOTRANSISTOR PHOTOCOUPLER. Schematic. Description. Features. Applications
Description Schematic The K series consist of an infrared emitting diode, optically coupled to a phototransistor detector. 6 They are packaged in a 6-pin DIP package and available in wide-lead spacing
8 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL827 Series
EL827 Series Schematic Features: Current transfer ratio (CTR: 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Compact small outline package Pb free and
Data Sheet ACPL-227 / ACPL-247. DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler. Description. Features. ACPL-227 pin layout
ACPL-227 / ACPL-247 DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product
Q817 series 4-PIN DC INPUT OPTOCOUPLER Feature: Certification & Compliance: Halogen Free
Feature: Certification & Compliance: Halogen Free Pb free and RoHS Compliant High Isolation voltage between input and output UL recognized (File # E338132) (Viso = 5000V rms) VDE recognized (File # 40030457)
4 PIN DIP HIGH VOLTAGE PHOTODARLINGTON PHOTOCOUPLER EL852 Series
EL852 Series Schematic Features: High collector- emitter voltage (VCEO=350V) Current transfer ratio (CTR: 1000% min. at I F =1mA, V CE =2V) High isolation voltage between input and output (Viso=5000 V
HIGH VOLTAGE PHOTOTRANSISTOR OPTOCOUPLERS
DESCRIPTION The HDX and 4N38 are phototransistor-type optically coupled optoisolators. An infrared emitting diode manufactured from specially grown gallium arsenide is selectively coupled with a high voltage
Slotted Optical Switch OPB355, OPB360, OPB370, OPB380, OPB390 OPB859, OPB860, OPB870, OPB880, OPB890 Series
Features: 0.125 (3.175 mm) slot width Choice of aperture (0.050 or 0.010 width) Choice of opaque or IR transmissive shell material Choice of mounting configurations Choice of lead spacing or wires L T
200mW, 4 PIN DIP Phototransistor Photocoupler
2mW, 4 PIN DIP Phototransistor Photocoupler FEATURES Current transfer ratio (CTR: MIN.8% at IF=5mA, VCE=5V) High isolation voltage between input and output (Viso=5V rms) High collector-emitter voltage
High Density Mounting Type Photocoupler
High Density Mounting Type Photocoupler Series Features Current transfer ratio (CTR : MIN. 50% at IF=5mA, CE=5) High input-output isolation voltage: (ISO : 5,000rms) Compact dual-in-line package : 1-channel
K1010 Series. cosmo 4PIN PHOTOTRANSISTOR PHOTOCOUPLER. Schematic. Description. Features. Applications
Description The K series consist of an infrared emitting diode, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option.
MOC215-M MOC216-M MOC217-M
DESCRIPTION These devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector, in a surface mountable, small outline, plastic package.
4 PIN ULTRA SMALL SSOP PHOTOTRANSISTOR PHOTOCOUPLER
Features: Halogens free Current transfer ratio (CTR: 50~600% at I F =5mA, V CE =5V) (CTR: 40~320% at I F =10mA, V CE =5V) High isolation voltage between input and output (Viso=3750 V rms ) Compact 4 Pin
SAT800-STR. Features. Description. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description The SAT800 consists of two phototransistors, each optically coupled to two light emitting diodes for AC input operation. Optical coupling between the input IR LED and output phototransistor
QT-Brightek Optocoupler Series
QT-Brightek Optocoupler Series 4-PIN Long Mini-Flat Phototransistor Optocoupler Part No.: QT101X-W Product: QT101X-W Date: September 13, 2018 Page 1 of 13 Table of Contents: Introduction... 3 Absolute
KPS28010T Series 4PIN SSOP LOW INPUT CURRENT PHOTOCOUPLER
Description The KPS28T series is DC-input single channel which contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin SSOP package. The input-output isolation
Wide Gap Slotted Optical Switch OPB800 & OPB810 (L and W Series)
Features: 0.375 (9.525 mm) wide gap Choice of aperture size Choice of minimum photocurrent Choice of opaque or IR transmissive shells Available for PCBoard mounting or with 24 26 AWG wires Product Photo
PHOTOCOUPLER PS2801A-1,PS2801A-4
PHOTOCOUPLER PS280-1,PS280-4 HIGH ISOLATION VOLTAGE SSOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS280-1 and PS280-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN
Photocoupler Product Data Sheet LTV-100X-G series datasheet LITE-ON DCC RELEASE
Product Data Sheet LTV-100X-G series datasheet Spec No. :DS70-2013-0012 Effective Date: 10/04/2018 Revision: H LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien
4 PIN SSOP PHOTOTRANSISTOR PHOTOCOUPLER EL3H7-G Series
EL3H7-G Series Schematic Features: Halogens free (Br
HIGH COLLECTOR TO EMITTER VOLTAGE SOP MULTI PHOTOCOUPLER
DESCRIPTION PHOTOCOUPLER PS2732-1,PS2733-1 HIGH COLLECTOR TO EMITTER VOLTAGE SOP MULTI PHOTOCOUPLER NEPOC Series The PS2732-1 and PS2733-1 are optically coupled isolators containing a GaAs light emitting
Data Sheet. ACPL-227 / ACPL-247 DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler. Description. Features. ACPL-227 pin layout
ACPL-227 / ACPL-247 DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product
UNISONIC TECHNOLOGIES CO., LTD UPC817
UNISONIC TECHNOLOGIES CO., LTD UPC817 4 PIN DIP PHOTOTRANSISTOR DESCRIPTION The UTC UPC817 is a 4 pin DIP phototransistor photocoupler, it uses UTC s advanced technology to provide the customers with high
PC357N Series. Mini-flat Package, General Purpose Photocoupler. PC357N Series
PC7N Series PC7N Series Mini-flat Package, General Purpose Photocoupler Description PC7N Series contains an IRED optically coupled to a phototransistor. It is packaged in a -pin Mini-flat package. Input-output
EVERLIGHT ELETCRONICS CO., LTD
Features: Current transfer ratio (CTR:MIN.600% at I F =1mA,V CE =2V) High isolation voltage between input and output (Viso=5000 V rms ) Compact dual-in-line package EL815:1-channel type Pb free UL approved
TIL111/TIL117/MCT2/MCT2E 6-PIN DIP PHOTOTRANSISTOR OPTOCOUPLER Feature: UL recognized (File # E338132) Creepage distance > 7.6mm
Feature: Certification & Compliance: High Isolation voltage between input and output Pb free and RoH Compliant (Viso = 5000V rms) UL recognized (File # E338132) Creepage distance > 7.6mm VDE recognized
Distributed by: www.jameco.com 18008314242 The content and copyrights of the attached material are the property of its owner. Features: Can identify if liquid is present in clear tubes that have an outside
KPC354NT Series 4PIN MINI-FLAT PHOTOTRANSISTOR PHOTOCOUPLER
Description The KPC354 series of devices each consist of two infrared emitting diodes, connected in inverse parallel, optically coupled to a phototransistor detector. They are packaged in a 4-pin Mini-Flat
Agilent HCPL-354 AC Input Phototransistor Optocoupler SMD Mini-Flat Type
Agilent HCPL-34 AC Input Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Description The HCPL-34 contains a phototransistor, optically coupled to two light emitting diodes connected inverse parallel.
HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES
PHOTOCOUPLER PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES NEPOC Series DESCRIPTION The PS2561A-1 is an optically coupled isolator
PS2805C-1, PS2805C-4 DESCRIPTION FEATURES APPLICATIONS. PIN CONNECTION (Top View) R08DS0074EJ0300 Rev Jan 9, 2013
, HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER Data Sheet R08DS0074EJ0300 Rev.3.00 DESCRIPTION The and are optically coupled isolators containing a GaAs light emitting diode and an NPN
4 PIN SOP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLE EL354N-G Series
Schematic Features Halogens free (Br
Property of LITE-ON Only ` Part No. LTV-217 / 227 / 247 Series Page : 1 of 16
FEATURES LITE-ON TECHNOLOGY CORPORATION ` * Current transfer ratio ( CTR : MIN. 50% at I F = 5mA, V CE = 5V ) * Isolation voltage between input and output LTV-2X7 series ( Viso = 3.75KVrms ) * Employs
HIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER
DESCRIPTION HIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER PHOTOCOUPLER NEPOC Series The is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. This
KPC355NT Series 4PIN MINI-FLAT PHOTODARLINGTON PHOTOCOUPLER
4 Description Schematic The KPC355NT series consist of a photodarlington 1optically coupled to a gallium arsenide infrared-emitting diodes in a 4-pin Mini-Flat package. The input-output 2isolation voltage
PHOTOCOUPLER PS2506-1,-2,-4,PS2506L-1,-2,-4
PHOTOCOUPLER PS2506-1,-2,-4,PS2506L-1,-2,-4 HIGH ISOLATION VOLTAGE AC INPUT, DARLINGTON TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES NEPOC Series DESCRIPTION The PS2506-1, -2, -4 and PS2506L-1, -2, -4 are
200mW, 4 PIN DIP Phototransistor Photocoupler
2mW, 4 PIN DIP Phototransistor Photocoupler FEATURES Current transfer ratio (CTR: MIN.8% at IF=5mA, VCE=5V) High isolation voltage between input and output (Viso=5V rms) Creepage distance>7.62mm UL Recognized
NEC's HIGH CTR, 4 OR 16 PIN SOP OPTOCOUPLER
NEC's HIGH CTR, 4 OR 6 PIN SOP OPTOCOUPLER PS28- FEATURES HIGH CURRENT TRANSFER RATIO: CTR = 2% TYP @ IF = ma HIGH ISOLATION VOLTAGE: BV: 2.5 k Vr.m.s. SMALL THIN PACKAGE: 4, 6-pin SOP, Pin pitch.27 mm
元佐电子 PC-17K1/2/4, PC-17L1/2/4, PC-17K1C(T/TN)
PC-7K/2/4, PC-7L/2/4, PC-7KC(T/TN). Description These Photocouplers consist of a Gallium Arsenide Infrared Emitting Diode and a Silicon NPN Phototransistor per channel. PC-7 K : DIP type (7.62mm) : One
PHOTOCOUPLER PS2805-1,PS2805-4
PHOTOCOUPLER PS2805-1,PS2805-4 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS2805-1 and PS2805-4 are optically coupled isolators containing GaAs light emitting
PRODUCT SPECIFICATION. High Reliability Photocoupler
DATE:6/4/ NO.6P4 ELECTRONICS CORPORATION KS SHEET OF 6 6 Features High Reliability Photocoupler. Current transfer ratio ( CTR:Min. % at IF=mA V CE =V ). High isolation voltage between input and output
CNY17 & CNY17F 6-PIN DIP PHOTOTRANSISTOR OPTOCOUPLER Feature: UL recognized (File # E338132) Current transfer ratio
Feature: Certification & Compliance: High Isolation voltage between input and output Pb free and RoH Compliant (Viso = 5000V rms) UL recognized (File # E338132) Current transfer ratio VDE recognized (File
Parameter Symbol Rating Unit Forward current. IF 50 ma. P C 150 mw P tot 170 mw V iso 3.75 kv rms T opr - 30 to C.
PC4T PC4T Features. Built-in breakdown diode for absorption of surge voltage 2. High current transfer ratio ( CTR: MIN. % at I F = ma ) 3. Mini-flat package 4. Applicable to soldering reflow. Available
KPC357NT Series 4PIN MINI-FLAT PHOTOTRANSISTOR PHOTOCOUPLER
4cosmo Description Schematic The KPC357 is DC-input single channel which 1contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin Mini-Flat 2package. The input-output
TLP627,TLP627-2,TLP627-4
TOSHIBA PHOTOCOUPLER GaAs IRED & PHOTO-TRANSISTOR PROGRAMMABLE CONTROLLERS DC-OUTPUT MODULE TELECOMMUNICATION Unit in mm The TOSHIBA TLP627,-2 and -4 consists of a gallium arsenide infrared emitting diode
KT1200 Series 4PIN LSOP PHOTODARLINGTON PHOTOCOUPLER
141. Anode 3 Description The KT12 series consist of a photo darlington optically coupled to a gallium arsenide Schematic 2infrared-emitting diode in a 4 pin LSOP wide body package. It features a high current
HIGH ISOLATION VOLTAGE AC INPUT DARLINGTON TRANSISTOR TYPE SOP OPTOCOUPLER
HIGH ISOLATION VOLTAGE AC INPUT DARLINGTON TRANSISTOR TYPE SOP OPTOCOUPLER FEATURES HIGH ISOLATION VOLTAGE BV: 25 kvr.m.s. SMALL THIN PACKAGE 4, 6 pin SOP, pin pitch.27 mm AC INPUT RESPONSE HIGH CURRENT
SAT1600-S. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description The SAT1600 consists of four phototransistors optically coupled to individual light emitting diodes. Optical coupling between two input IR LEDs and a single output phototransistor allows for
Anode mark. 2. High isolation voltage between input and output (V iso (rms) :5kV) 3. Compact dual-in-line package ± ±0.
PC87X Lead forming type (I type) and taping reel type (P type) are also available. (PC87XI/PC87XP) TÜ (DE88) approved type is also available as an option. (approved name:pc87) Features Outline Dimensions.
PC715V0NSZX Series. DIP 6 pin Darlington Phototransistor Output Photocoupler
PC75NSZX Series DIP pin Darlington Phototransistor Output Photocoupler Description contains an IRED optically coupled to a phototransistor. It is packaged in a pin DIP. Input-output isolation voltage(rms)
PHOTOCOUPLER PS2505-1,-2,-4,PS2505L-1,-2,-4
PHOTOCOUPLER PS25-1,-2,-4,PS25L-1,-2,-4 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE MULTI PHOTOCOUPLER SERIES NEPOC Series DESCRIPTION The PS25-1, -2, -4 and PS25L-1, -2, -4 are optically coupled isolators
Photocouplers LTV-10.. Series (Preliminary Version) Data Sheet. Photocouplers LTV-10.. Series (Preliminary Version)
Data Sheet Created Date : 03 / 05 / 2012 Revision : Preliminary, 03 / 05 / 2012 1 Lite-on Technology Corp. Optoelectronics SBG http://www.liteon.com/opto 1. DESCRIPTION 1.1 Features Current transfer ratio
Property of LITE-ON Only FEATURES
FEATURES * Current transfer ratio ( CTR : MIN. 50% at I F = 5mA, V CE = 5V ) * Isolation voltage between input and output LTV-217/227/247 Series ( Viso = 3.75KVrms ) * Employs double transfer mold technology
Maintenance/ Discontinued
Optoisolators (Photocouplers) This product complies with the RoHS Directive (EU 22/95/EC). CNZ373 (ON373) Optoisolators Overview The CNZ373 of optoisolators consist of a GaAs infrared LED which is optically
Transistor Output SMALL OUTLINE OPTOISOLATORS TRANSISTOR OUTPUT SCHEMATIC. MAXIMUM RATINGS (TA = 25 C unless otherwise noted) Rating Symbol Value Unit
Transistor Output These devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector, in a surface mountable, small outline, plastic
QT-Brightek Optocoupler Series
QT-Brightek Optocoupler Series 4-PIN DC Input Phototransistor Part No.: QTH217 Product: QTH217 Date: April 12, 2018 Page 1 of 13 Table of Contents: Introduction... 3 Absolute Maximum Rating... 4 Electrical
Optocoupler, Photodarlington Output, High Gain, With Base Connection
Optocoupler, Photodarlington Output, High Gain, With Base Connection Features Very high current transfer ratio, 500 % Min. High isolation resistance, 0 Ω Typical Standard plastic DIP package Lead-free
Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS FEATURES Excellent CTR linearity depending on forward current Isolation test voltage, 53 V RMS A 1 4 C Fast switching times C 2 3 E Low CTR
Photocoupler Product Data Sheet LTV-2X7-G (Half pitch series) Spec No. :DS Effective Date: 04/13/2017 Revision: - LITE-ON DCC RELEASE
Product Data Sheet LTV-2X7-G (Half pitch series) Spec No. :DS70-207-0023 Effective Date: 04/3/207 Revision: - LITE-ON DCC RELEASE BNS-OD-FC00/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien Road,
ITR1201SR10AR/TR. Features. Description. Applications. Device Selection Guide. Revision 1. LifecyclePhase: Expired Period: Forever
Features Fast response time High sensitivity Cut-Off visible wavelength Thin Compact Pb free This product itself will remain within RoHS compliant version. Description is a light reflection switch which
Optocoupler, Phototransistor Output, Low Input Current
Optocoupler, Phototransistor Output, Low Input Current A C 2 4 3 C E FEATURES Good CTR linearity depending on forward current Low CTR degradation High collector emitter voltage, V CEO = 55 V Isolation
Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, Low Input Current FEATURES A C 1 2 4 3 C E Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation
Optocoupler, Photodarlington Output, High Gain, 300 V BV CEO
Optocoupler, Photodarlington Output, High Gain, 300 V BO i79060 DESCRIPTION i79062-3 The is optically coupled isolators with a gallium arsenide infrared LED and a silicon photodarlington sensor. Switching