Environmental Test. Piezoelectric MEMS Response Accelerometers, Shock Sensors, Force Sensors, Pressure Sensors, Acoustic Microphones & Torque Sensors

Transcription

1 Evirometal Test Evirometal Test Piezoelectric MEMS Respose Accelerometers, Shock Sesors, Force Sesors, Pressure Sesors, Acoustic Microphoes & Torque Sesors Aerospace & Defese Divisio

2 Evirometal Test Evirometal Test Itroductio PCB Piezotroics was fouded i 1967 as a maufacturer of piezoelectric quartz sesors, ad associated electroics for the measuremet of dyamic pressure, force, ad acceleratio. The uique expertise of the compay was the icorporatio of microelectroic sigal coditioig circuitry withi these sesors to make them easier to use ad more evirometally compatible. These ICP sesors gaied wide popularity ad became the foudatio for the compay s success. Subsequet growth ad steady ivestmet i facilities, machiery, ad equipmet permitted a costat broadeig of the product offerig. Measuremet capabilities expaded with the additio of piezoceramic, tourmalie, capacitive, piezoresistive, ad metal strai gage sesig techologies. Esuig products iclude idustrial accelerometers, DC MEMS accelerometers, load cells, torque sesors, microphoes, pressure trasmitters, ad calibratio equipmet. The backboe of the compay is its missio statemet: Total Customer Satisfactio. This missio is ot oly supported by products that offer great value, but also backed by our idustry exclusive Lifetime Warraty Plus. Factory applicatios egieerig ad a worldwide etwork of sales offices ad represetatives are readily available to assist with customer requests. Quality System Certificatios PCB Quality Systems are certified to the requiremets of the followig Iteratioal Stadards: AS9100 Revisio B: Requiremets for Aviatio, Space ad Defese ISo9001:2000: Quality Maagemet Systems requiremets ISo17025 ad ANSI-Z-540-1: Requiremets for Competece of Testig & Calibratio Laboratories EN13980 & Directive 94/9/EC: Quality Systems for Potetially Explosive Atmospheres These stadards strive for process cosistecy ad provide a meas for cotiuous improvemet while coverig the etire product cycle, which icludes cotractig, product desig cotrol, maufacturig process cotrol ad ispectio ad test. I-house calibratio of PCB sesors is coducted with full traceability to Natioal ad Iteratioal Istitutes of Stadards ad Techology (N.I.S.T., P.T.B). I additio, a complete listig of A2LA accredited calibratio services is documeted o PCB s Scope of Calibratio documet(s). The purpose of these stadards is to facilitate trade, exchage ad techology trasfer through: Ehaced product quality ad reliability at a reasoable price Improved health, safety ad evirometal protectio Greater compatibility ad iteroperability of goods ad services Simplificatio for improved usability, Icreased distributio efficiecy, ad ease of maiteace Assurace of quality system coformity is provided by certifyig bodies ad through our iteral auditig system. I additio, our system remais compliat with obsolete or superseded stadards such as: ISo (former MIL-STD-45662A), Guide 25, MIL- Q-9858 ad MIL-I PCB is also compliat to uclear power plat specificatio 10CFR50 Appedix B. PCB sesors are capable of testig MIL-STD-810 ad MIL-STD-461. If you require compliace to a product or applicatio specific stadard (such as RoHS, Europea CE Markig, or US test requiremet MIL-STD-740-2) which was ot metioed, please cotact the factory for additioal iformatio. 2 Aerospace & Defese Divisio

3 Evirometal Test Table of Cotets Page HALT/HASS ICP Test Accelerometers ICP Accelerometers with Excellet Thermal Stability Filtered Accelerometers High Amplitude ICP Shock Accelerometers MEMS Piezoresistive High-G Shock Accelerometers Low Outgassig ICP & Charge Mode Accelerometers ad Cables High Temperature Charge Mode Accelerometers Cryogeic ICP Accelerometers Force Limited Vibratio Testig Systems Compoet ICP & Charge Output Force Sesors Sigal Coditioig & Summig Amplifiers Extreme Eviromet ICP & Charge Output Pressure Sesors Water Cooled, Helium Bleed Pressure Sesors High Temperature Charge Output & Cryogeic ICP Pressure Sesors Uderwater Sesors High Itesity Acoustic ICP Pressure Sesors ICP Accelerometers Calibratio of Sesors for Evirometal Test Accelerometer Calibratio Workstatio Portable Vibratio Calibrator Hadheld Shaker Stock Cables Low Outgassig Cables Suitable for Thermal Vacuum Chamber Exposure Aerospace & Defese Divisio

4 Evirometal Test Applicatios: Quality Assurace (HALT, HASS, ESS) vibratio Testig Combied Eviromets (-100 to 325 ºF) Photo Courtesy of Su Microsystems Advaced Product Testig Laboratory HALT/HASS ICP Test Accelerometers Evirometal Stress Screeig (ESS) is a geeral reliability testig term used to defie the practice of exposig primarily electroic products to evirometal stresses i a attempt to create failures ad expose defects. HALT ad HASS represet two types of ESS, each with differet goals. Highly Accelerated Life Testig (HALT) is a desig verificatio process, which exposes a product to very rapid ad extreme chages i vibratio ad temperature i a effort to quickly ucover desig ad assembly flaws. The stress level to which the product is subjected is usually much higher tha would ormally be aticipated durig use. Subsequet improvemets i desig or assembly techiques ca the be udertake to esure that a higher quality product is maufactured. Highly Accelerated Stress Screeig (HASS) is a weedig-out process that ivolves testig 100 percet of fial products i a effort to idetify those which may possess a higher probability of early failure. oly products that pass the testig are set alog to ed users. The result is a better quality product that has already demostrated to be less proe to failure. HASS ivolves exposure to evirometal iflueces icludig vibratio, temperature, humidity, ad pressure. HALT/HASS Test Accelerometers Model Number 320C03 320C04 320C15 320C20 320C33 Performace Sesitivity (± 10 %) Measuremet Rage 1.02 mv/(m/s²) ± 4900 m/s² pk 1.02 mv/(m/s²) ± 4900 m/s² pk 1.02 mv/(m/s²) ± 4900 m/s² pk 1.02 mv/(m/s²) ± 4900 m/s² pk 100 mv/g 10.2 mv/(m/s²) ± 50 g pk ± 490 m/s² pk Frequecy Rage (± 5 %) 1 to 6000 Hz 1 to 6000 Hz 1.0 to 10,000 Hz 2.0 to 5000 Hz 1 to 4000 Hz Resoat Frequecy 35 khz 35 khz 60 khz 60 khz 22 khz Broadbad Resolutio (1 to 10,000 Hz) g rms 0.03 m/s² rms g rms 0.03 m/s² rms g rms 0.05 m/s² rms g rms 0.06 m/s² rms g rms m/s² rms Filter Type Low Pass Electrical Filter Corer Frequecy 13 khz Electrical Filter Roll-off 6 db/octave Evirometal overload Limit (Shock) Temperature Rage (operatig) Size (Height x Hex) Weight ± 98,100 m/s² pk -100 to +325 F -73 to +163 C 0.81 i x 0.50 i 20.6 mm x 12.7 mm 0.38 oz 10.5 gm ± 98,100 m/s² pk -100 to +325 F -73 to +163 C 1.14 i x 0.50 i 29.0 mm x 12.7 mm 0.38 oz 10.5 gm ± 98,100 m/s² pk -100 to +325 F -73 to +163 C 0.43 i x 5/16 i 10.9 mm x 5/16 i 0.07 oz 2.0 gm ± 98,100 m/s² pk -100 to +325 F -73 to +163 C 0.87 i x 0.38 i 22.1 mm x oz 6.5 gm ± 2000 g pk ± 19,620 m/s² pk -100 to +325 F -73 to +163 C 0.85 i x 0.75 i 21.6 mm x 19.1 mm 0.7 oz 20 gm Sesig Elemet Quartz Quartz Quartz Quartz Quartz Sesig Geometry Shear Shear Shear Shear Shear Housig Material Titaium Titaium Titaium Titaium Titaium Electrical Coector Coaxial Jack Coaxial Jack 5-44 Coaxial Coaxial Jack Coaxial Jack Electrical Coector Positio Side Top Side Top Side Moutig Thread Female Female 5-40 Male Male Female 4 Aerospace & Defese Divisio

5 Evirometal Test ICP Accelerometers with Excellet Thermal Stability PCB sigle axis ad triaxial ICP accelerometers are desiged with a low temperature coefficiet, wide operatig temperature rage, ad good broadbad measuremet resolutio, makig them ideal for ay vibratio measuremet requirig tight cotrol of amplitude sesitivity over a wide thermal gradiet. To alleviate the effects of high frequecy overloads some models have a low pass filter icorporated, esurig accurate data i the frequecy rage of iterest. Highlights: Temperature coefficiet as low as 0.005% / F (0.009% / C) Titaium housed ad hermetically sealed Stud, adhesive ad through hole moutig cofiguratios Applicatios: Egie Systems ad Exhaust Compoet ad System Dyamic Performace ESS ad Durability Testig i Climatic Chambers Techical Specificatios Model Number 320C52 339A30 339A31 339A32 Sesitivity 50 mv/g Measuremet Rage ± 100 g pk Broadbad Resolutio g rms g rms g rms g rms g rms Frequecy Rage (± 5 %) 1 to 10 khz 2 to 8 khz 2 to 8 khz 2 to 8 khz 2 to 5 khz 50 khz 25 khz 25 khz 45 khz 35 khz 55 khz 25 khz 45 khz Resoat Frequecy (x or y axis) Resoat Frequecy (z axis) T339A34 [1] Evirometal overload Limit (Shock) Temperature Rage -100 to +325 F -73 to +163 C -65 to +325 F -54 to +163 C -65 to +325 F -54 to +163 C -65 to +325 F -54 to +163 C -65 to +325 F -54 to +163 C Temperature Coefficiet of Sesitivity %/ F %/ C %/ F %/ C %/ F %/ C %/ F %/ C 0.03 %/ F 0.06 %/ C Housig Material Titaium Titaium Titaium Titaium Titaium Sealig Hermetic Hermetic Hermetic Hermetic Hermetic 0.23 x 0.65 x 0.38 i 5.84 x 16.4 x 9.6 mm 0.4 i Cube 10.2 mm Cube 0.55 x 0.4 x 0.4 i 14 x 10.2 x 10.2 mm 0.28 x 0.47 x 0.47 i 7.0 x 12.0 x 12.0 mm 0.55 x 0.80 x 0.55 i 14.0 x 23.3 x 14.0 mm Size (H x L x W) 1.85 gm 4.0 gm 5.5 gm 3.6 gm 10.5 gm Electrical Coector Weight 5-44 Coaxial Pi Pi Pi 1/ Pi Moutig Through Hole Adhesive 5-40 Stud Adhesive 5-40 Stud Notes [1] TEDS Capable of Digital Memory ad Commuicatio compliat with IEEEP Aerospace & Defese Divisio

6 Evirometal Test Photo Courtesy of Su Microsystems Advaced Product Testig Laboratory Filtered ICP Accelerometers Impact testig of aerospace compoets ofte ivolves exposig the test specime to dyamic stimuli, which iclude high levels of broadbad excitatio. This testig regimet ca cause resoat behavior i brackets or other subassemblies that may be mouted to the compoet uder test. A resoatig compoet ca cause vibratio eergy to be trasmitted throughout the test structure, which ca potetially corrupt or mask the measuremet data of iterest. Iteral LP filterig is used to elimiate uwated high magitude high frequecy sigals that are above the structural frequecy rage of iterest. Highlights: Qualificatio testig durig high radom excitatio Miimize the possibility of amplifier saturatio Exted the usable high frequecy rage of data aquistio Filtered Accelerometers Model Number 352B70 352A72 356A63 356A66 Performace Sesitivity(± 15 %) Measuremet Rage 1 mv/g 0.1 mv/(m/s²) ± 49,000 m/s² pk 1.02 mv/(m/s²) ± 4905 m/s² pk 1.02 mv/(m/s²) ± 4905 m/s² pk 1.02 mv/(m/s²) (± 10 %) ± 4905 m/s² pk Frequecy Rage(± 5 %) 0.7 to 9000 Hz 0.5 to 4500 Hz 2 to 4000 Hz 2 to 4000 Hz Electrical Filter Corer Frequecy 23 khz 15 khz 15 khz 16 khz Electrical Filter Roll-off 12 db/octave 6 db/octave 6 db/octave 6 db/octave Resoat Frequecy 55 khz 65 khz 55 khz 35 khz Broadbad Resolutio (1 to 10,000 Hz) Evirometal overload Limit (Shock) Temperature Rage (operatig) Size (Height x Legth x Width) Weight (without cable) g rms 0.25 m/s² rms ± 98,000 m/s² pk -54 to +121 C 0.90 x 3/8 i 22.9 mm x 3/8 i (Height x Hex) 0.15 oz 4.3 gm g rms 0.03 m/s² rms ± 98,000 m/s² pk -54 to +121 C 0.14 i x 0.41 i x 0.25 i 3.6 mm x 10.4 mm x 6.4 mm oz 0.64 gm g rms 0.08 m/s² rms ± 98,000 m/s² pk -54 to +121 C 0.40 i x 0.77 i x 0.40 i 10.2 mm x 19.6 mm x 10.2 mm 0.19 oz 5.3 gm g rms 0.02 m/s² rms ± 98,000 m/s² pk -54 to +121 C 0.55 i x 0.80 i x 0.55 i 14.0 mm x 20.3 mm x 14.0 mm 0.32 oz 9.0 gm Sesig Elemet Ceramic Ceramic Ceramic Ceramic Sesig Geometry Shear Shear Shear Shear Housig Material Titaium Titaium Titaium Titaium Electrical Coector Coaxial Jack Solder pis, 10 ft. attached cable, plug 1/ Pi 1/ Pi Electrical Coector Positio Top Side Side Side Moutig Thread Female Adhesive 5-40 Female Female 6 Aerospace & Defese Divisio

7 Evirometal Test High Amplitude ICP Shock Accelerometers Shock accelerometers are specifically desiged to withstad ad measure extreme, high amplitude, short-duratio, trasiet acceleratios. Such acceleratios characteristically exceed the 1000 g boudary imposed o other typical accelerometer desigs. Shock acceleratio evets may reach 100,000 g or more with pulse duratios of less tha 10 microsecods. The extremely fast trasiet ad volatile ature of a shock evet imposes special demads o the desig. PCB shock accelerometers represet extesive research i materials, assembly techiques, ad testig techiques to isure survivability ad faithful represetatio of the shock evet. PCB ivested i a automated Hopkiso Bar Calibratio Statio to evaluate shock sesor performace by simulatig, high amplitude measuremet coditios. This allows PCB to assess ad improve upo idividual sesor characteristics, such as zero shift, rigig ad o-liearity. Highlights: Applicatios: Mechaically isolated ad electrically filtered, which avoids rigig ad miimizes zero shift Lightweight titaium costructio Hermetically sealed for harsh eviromets Provides high voltage, low impedace output Pyroshock Evets Recoil ad Peetratio Impact Press Moitorig Explosive Studies Shaker Shock Models 350B23 350D02 350B21 350B50 High Amplitude ICP Shock Respose Accelerometers Sigle Axis Triaxial Model Number 350B23 350D02 350B21 350B50 Performace Sesitivity (± 30 %) Measuremet Rage 0.5 mv/g 0.05 mv/(m/s²) ± 98,000 m/s² pk 0.1 mv/g 0.01 mv/(m/s²) ± 50,000 g pk ± 490,000 m/s² pk 0.05 mv/g mv/(m/s²) ± 100,000 g pk ± 980,000 m/s² pk 0.5 mv/g 0.05 mv/(m/s²) ± 98,000 m/s² pk Frequecy Rage (± 1 db) 0.4 to 10,000 Hz 4 to 10,000 Hz 1 to 10,000 Hz 3 to 10,000 Hz Frequecy Rage (-3 db) 0.2 to 25,000 Hz 2 to 25,000 Hz 0.5 to 35,000 Hz 1.5 to 20,000 Hz Electrical Filter Corer Frequecy (-3 db) 13 khz 17 khz NA 20 khz Mechaical Filter Resoat Frequecy 23 khz 45 khz NA NA Resoat Frequecy 100 khz 100 khz 200 khz 60 khz Evirometal overload Limit (Shock) Temperature Rage (operatig) ± 50,000 g pk ± 490,000 m/s² pk 0 to +150 F -18 to +66 C ± 150,000 g pk ± 1,471,500 m/s² pk 0 to +150 F -18 to +66 C ± 200,000 g pk ± 1,960,000 m/s² pk -65 to +200 F -54 to +93 C ± 25,000 g pk ± 245,000 m/s² pk -54 to +121 C Sesig Elemet Ceramic Ceramic Ceramic Ceramic Sesig Geometry Shear Shear Shear Shear Sealig Hermetic Hermetic Hermetic Hermetic Housig Material Titaium Titaium Titaium Titaium Size (Hex x Height) i x 0.75 i 9.5 mm x 19.1 mm i x 0.87 i 9.5 mm x 19.1 mm i x 0.75 i 9.5 mm x 19.1 mm 0.32 i x 0.72 i x 0.72 i 8.2 mm x 18.3 mm x 18.3 mm (Height x Legth x Width) Weight 0.16 oz 4.5 gm 0.15 oz 4.2 gm 0.15 oz 4.2 gm 0.3 oz 8.0 gm Electrical Coector Itegral Cable Itegral Cable Itegral Cable Itegral Cable Cable Legth 10 ft 3.05 m Moutig Thread 1/4-28 Male 1/4-28 Male 1/4-28 Male Through Hole 10 ft 3.05 m 10 ft 3.05 m 5.0 ft 1.52 m Aerospace & Defese Divisio

8 Evirometal Test MEMS Piezoresistive High-G Shock Accelerometers DC Repose, Four-wire Full Bridge MEMS high-amplitude shock accelerometers, from PCB Piezotroics, represet state-of-the-art idustry techology for miiature, high amplitude, DC respose acceleratio sesors, capable of measurig log duratio trasiet motio, as well as respodig to ad survivig extremely fast rise times, typical of a High-G shock evet. Both packaged ad oem cofiguratios are offered, to fulfill a variety of istallatio requiremets. The lightly air-damped acceleratio sesig elemet, which is micromachied from silico, is maufactured with the latest advaces i etchig techiques ad equipmet. This tiy elemet measures just 2.5 x 1.7 x 0.9 mm (L x W x H), ad icorporates a seismic mass, protective over-rage stops, ad a full-active, piezoresistive Wheatstoe bridge. This Series is iteded to fulfill the most demadig aerospace, idustrial, ad commercial applicatio requiremets. Their desig cocepts were bor from more tha 20 years of PCB expertise i High-G shock ( 20,000 g) measuremet applicatios ad sesor developmet. our process egieers utilized the latest ad most sophisticated techiques ad equipmet to achieve the desired performace levels that previously have ot bee attaiable. Utilizig deep reactive io etchig (DRIE) equipmet ad techiques, PCB ca micromachie i-house, from extremely strog sigle crystal silico, the idustry s smallest, most accurate ad durable shock accelerometer. Series 3501 & 3503 MEMS High-G Shock Accelerometers Surface Mout Packaged Model Number Performace Sesitivity (± 50 %) (at 10 vdc excitatio) Sesitivity Measuremet Rage 3501A2020KG Sigle Axis mv/(m/s²) mv/v/g mv/v/(m/s²) ± 20,000 g ± 196,100 m/s² pk 3501A1220KG Sigle Axis mv/(m/s²) mv/v/g mv/v/(m/s²) ± 20,000 g ± 196,100 m/s² pk 3503A1020KG Triaxial mv/(m/s²) mv/v/g mv/v/(m/s²) ± 20,000 g ± 196,100 m/s² pk Frequecy Rage(± 1 db) 0 to 10,000 Hz 0 to 10,000 Hz 0 to 10,000 Hz Resoat Frequecy >60 khz >60 khz >60 khz Evirometal overload Limit (Shock) overload Limit (Mechaical Stops) Temperature Rage (operatig) Electrical ± 60,000 g pk ± 588,000 m/s² pk 30 Kg 294,200 m/s² pk -65 to 250 F -54 to 121 C ± 60,000 g pk ± 588,000 m/s² pk 30 Kg 294,200 m/s² pk -65 to 250 F -54 to 121 C ± 60,000 g pk ± 588,000 m/s² pk 30 Kg 294,200 m/s² pk -65 to 250 F -54 to 121 C Excitatio voltage (Maximum) 15 vdc 15 vdc 15 vdc Curret Cosumptio < 3 ma < 3 ma < 3 ma offset voltage -40 to +40 mvdc -40 to +40 mvdc -40 to +40 mvdc Sesig Elemet Piezoresistive MEMS Piezoresistive MEMS Piezoresistive MEMS Sesig Geometry Full Active Full Active Full Active Housig Material Ceramic Titaium Titaium Size (Height x Legth x Width) Weight Electrical Coector i x i x i 2.16 mm x 6.00 mm x 3.50 mm oz 0.15 gm Solder Tabs 3/8 i x 0.5 i 3/8 i x 12.7 mm (Hex x Height) oz 2.5 gm 10-ft / 3.05 m Itegral Type 034 Cable with Pigtail Eds 0.25 i x 0.47 i x 0.47 i 6.35 mm x mm x mm 0.1 oz 2.83 gm 10-ft / 3.05 m Itegral Type 026 Cable with Pigtail Eds Moutig Surface Mout 1/4-28 Itegral Stud Through Holes (2) 8 Aerospace & Defese Divisio

9 Evirometal Test Highlights: Packaged ad oem Cofiguratios Sigle axis ad triaxial arragemets Wide bad frequecy respose No zero-shift Mechaical over-rage stops improves survivability Slight dampig reduces resoace amplificatio 20 KG ad 60 KG rages available Applicatios Cosumer Electroics Drop Testig Dow-hole oil Exploratio Shot Coutig for Rifles ad Hadgus Tool Maufacturers Pyroshock Crash ad Impact Eviromets MEMS High-G Shock Accelerometers Surface Mout Packaged Model Number Performace Sesitivity (± 50 %) (at 10 vdc excitatio) Sesitivity Measuremet Rage Frequecy Rage(± 1 db) 3501A2060KG Sigle Axis mv/g mv/(m/s²) mv/v/g mv/v/(m/s²) ± 60,000 g pk ± 588,400 m/s² pk 0 to 20,000 Hz ± 588,400 m/s² pk 3501A1260KG Sigle Axis mv/g mv/(m/s²) mv/v/g mv/v/(m/s²) ± 60,000 g pk ± 588,400 m/s² pk 0 to 20,000 Hz ± 588,400 m/s² pk Resoat Frequecy >120 khz >120 khz Evirometal overload Limit (Shock) overload Limit (Mechaical Stops) Temperature Rage (operatig) Electrical ± 100,000 g pk ± 980,665 m/s² pk 80 Kg 782,534 m/s² pk -65 to 250 F -54 to 121 C ± 100,000 g pk ± 980,665 m/s² pk 80 Kg 782,534 m/s² pk -65 to 250 F -54 to 121 C Excitatio voltage (Maximum) 15.0 vdc 15.0 vdc Curret Cosumptio <3 ma <3 ma offset voltage -40 to +40 mvdc -40 to +40 mvdc Sesig Elemet Piezoresistive MEMS Piezoresistive MEMS Sesig Geometry Full Active Full Active Housig Material Ceramic Titaium Size (Height x Legth x Width) Weight Electrical Coector i x i x i 2.16 mm x 6.00 mm x 3.50 mm oz 0.15 gm Solder Tabs 3/8 i x 0.5 i 3/8 i x 12.7 mm (Hex x Height) oz 0.15 gm 10-ft / 3.05 m Itegral Type 034 Cable with Pigtail Eds Moutig Surface Mout 1/4-28 Itegral Stud Aerospace & Defese Divisio

10 Evirometal Test Highlights vibratio measuremets i Thermal vacuum or Space eviromet Welded hermetic accelerometer desigs have low outgassig qualities Hermeticity testig is performed o all hermetic products at PCB Cables with strai relief use polymers are verified for Total Mass Loss ad Collected volatile Codesable Material Materials selected usig NASA guidelies Low Outgassig ICP & Charge Mode Accelerometers ad Cables Thermal Vacuum Vibratio Testig Exposure to the high vacuum level of a space eviromet iduces material outgassig i ordiary accelerometers ad cables. Ay substace subjected to a vacuum has the potetial to release trapped gasses. Cotamiats from outgassig ca codese oto earby surfaces obscurig them, rederig them useless durig their iteded applicatio. May hermetic accelerometer desigs have iheret low outgassig qualities. Cables with rubberized boots or shrik tubig typically do ot have low outgassig qualities. For all o-metallic materials outside of a hermetic package required for a applicatio i a vacuum eviromet, PCB verifies that the material has less tha or equal to 1% TML (total mass loss) ad a CvCM (collected volatile codesable mass material) less tha or equal to 0.1%. This is verified either usig NASA documetatio or test results from a outside laboratory. I ay applicatio ivolvig a vacuum eviromet, the importat thigs to cosider whe selectig low outgassig accelerometers ad cables are: welded hermetic housigs, polymers ad epoxies that have low TML ad CvCM values, ad leak testig services for low outgas verificatio of accelerometers. Low Outgassig ICP & Charge Mode Accelerometers Model Number 350M72 352M A07 357A09 Performace Sesitivity (± 10 %) Measuremet Rage 0.5 mv/g 0.05 mv/(m/s²) ± 98,000 m/s² pk 1.02 mv/(m/s²) ± 4905 m/s² pk 1.7 pc/g 0.17 pc/(m/s²) (± 20 %) ± 2000 g pk ± 19,620 m/s² pk 1.7 pc/g 0.17 pc/(m/s²) (± 20 %) ± 2000 g pk ± 19,620 m/s² pk Frequecy Rage (± 1 db) 0.4 to 10,000 Hz 0.5 to 10,000 Hz (± 5 %) 15,000 Hz (+5 %) 10,000 Hz (+5 %) Resoat Frequecy 100 khz 65 khz 60 khz 50 khz Evirometal overload Limit (Shock) Temperature Rage (operatig) ± 50,000 g pk ± 490,000 m/s² pk 0 to +150 F -18 to +66 C ± 98,100 m/s² pk -54 to +121 C ± 98,100 m/s² pk -100 to 500 F -73 to 260 C ± 98,100 m/s² pk -100 to 350 F -73 to 177 C Sesig Elemet Ceramic Ceramic Ceramic Ceramic Sesig Geometry Shear Shear Shear Shear Sealig Hermetic Hermetic Hermetic Hermetic Housig Material Titaium Titaium Titaium Titaium Size (Height x Legth x Width) Weight i x 0.95 i 9.5 mm x 24.1 mm (Hex x Height) 0.17 oz 4.8 gm 0.14 i x 0.41 i x 0.25 i 3.6 mm x 10.4 mm x 6.4 mm oz 0.64 gm i x i x i 4.9 mm x 10.7 mm x 6.4 mm 0.03 oz 0.7 gm 0.14 i x 0.45 i x 0.25 i 3.6 mm x 11.4 mm x 6.4 mm Moutig 1/4-28 Male Adhesive Adhesive Adhesive 0.02 oz 0.6 gm 10 Aerospace & Defese Divisio

11 Evirometal Test Accelerometer Types & Their Applicatios Cables Available Too! Mii-triaxial accelerometers Spacecraft structures are ofte made of thi, light-weight materials ad require low mass accelerometers. Full-scale spacecraft radom vibratio resposes are three-dimesioal, so the combiatio of a triaxial, low-mass ICP accelerometer with low outgassig properties is recommeded. PCB Model 356M208 meets this requiremet with a low mass of oe gram ad low outgassig characteristics. Shock accelerometers Separatio of booster stages cause shock evets that may be trasmitted to the spacecraft payload. Low outgassig ICP accelerometers such as PCB Model 350M72 may be lauched with the payload or used i a vacuum chamber to simulate lauch coditios. See Pg. 27 Accelerometer Force Sesor High temperature accelerometers Evirometal stress screeig is ofte performed i thermal vacuum chambers to verify operatig characteristics. PCB Model 357A07, (p. 10) offers a hermetic, low-mass package with a wide operatig temperature rage from -100 to +500 F (-73 to +260 C). PCB Model 356M208 accelerometer & force sesors used durig vibratio testig of bracket assembly at Utah State Space Dyamics Lab Low Outgassig ICP Accelerometers Model Number 356M M57 356M M98 5 mv/g 0.51 mv/(m/s²) ± 1000 g pk ± 9810 m/s² pk 2 to 8000 Hz 1.02 mv/(m/s²) (± 10 %) ± 4905 m/s² pk 2 to 10,000 Hz 500 mv/g 51 mv/(m/s²) (± 10 %) ± 10 g pk ± 98 m/s² pk 0.5 to 3000 Hz 1000 mv/g 102 mv/(m/s²) (± 10 %) ± 5 g pk ± 49 m/s² pk 0.5 to 3000 Hz 50 khz 55 khz 14 khz 20 khz ± 98,100 m/s² pk -54 to +121 C ± 98,100 m/s² pk -54 to +121 C ± 49,000 m/s² pk -65 to +176 F -54 to +80 C ± 49,000 m/s² pk -20 to +170 F -29 to +77 C Excitatio voltage 18 to 30 vdc 18 to 30 vdc 18 to 30 vdc 20 to 30 vdc output Impedace 200 ohm 200 ohm 300 ohm 600 ohm output Bias voltage 7 to 11 vdc 7 to 11 vdc 8 to 12 vdc 8 to 12 vdc Sesig Elemet Ceramic Ceramic Ceramic Ceramic Sesig Geometry Shear Shear Shear Shear Housig Material Titaium Titaium Titaium Titaium Performace Sesitivity (± 20 %) Measuremet Rage Frequecy Rage (± 5 %) (y or z axis) Resoat Frequecy Evirometal overload Limit (Shock) Temperature Rage (operatig) Electrical Size (Height x Legth x Width) 0.25 i x 0.25 i x 0.25 i 0.4 i x 0.4 i x 0.4 i 0.55 i x 0.80 i x 0.55 i 0.80 i x 1.03 i x 0.80 i 6.35 mm x 6.35 mm x 6.35 mm 10.2 mm x 10.2 mm x 10.2 mm 14.0 mm x 20.3 mm x 14.0 mm 20.3 mm x 26.1 mm x 20.3 mm Aerospace & Defese Divisio

12 Evirometal Test Applicatios Quality Assurace Thermal Stress Screeig Evirometal Testig High Temperature vibratio Measuremets Egie vibratio Aalysis Exhaust Compoet vibratio Tests High Temperature Charge Mode Accelerometers High Temperature Charge Mode Accelerometers May operatig egie eviromets geerate temperatures i excess of 550 ºF (288 ºC). Above this temperature, may of the desig features ad materials used i high temperature accelerometers chage cosiderably. For 550 ºF to 1,200 ºF (288 ºC to 650 ºC) operatig eviromets, PCB offers a rage of both sigleeded (measuremet output as a sigal ad groud) ad differetial (measuremet output as a plus ad mius sigal) sesors. The former ted to be smaller ad more suitable for short-term testig eeds, while the latter are more appropriate for log-term moitorig applicatios. obviously, the eviromets i which these sesors operate are challegig. I fact, i some of the highest temperature operatig eviromets, the operatig sesor measures vibratio sigatures while glowig red hot! Sice PCB maufactures the majority of its ow piezoelectric materials, we offer a extesive array of charge mode accelerometer form factors, sesitivities, frequecy rages ad sizes. A few of the sigle-eded accelerometers for use i up to 288 ºC (500 ºF) eviromets are preseted below. Complemetig this rage of sesors is a variety of i-lie ad laboratory grade bech top ad rack mouted charge amplifiers. The accelerometers summarized here are oly a subset of the available. Please referece PCB s Test ad Measuremet Catalog or our web site at for additioal product offerigs. of course, custom desiged accelerometers are available. Model Number 357B11 357B06 357B21 357B22 Performace Sesitivity (± 10 %) Measuremet Rage 3 pc/g 0.31 pc/(m/s²) ± 2300 g pk ± 22,600 m/s² pk 5 pc/g (± 20 %) 0.51 pc/(m/s²) ± 4905 m/s² pk 30 pc/g (± 15 %) 3.1 pc/(m/s²) ± 1500 g pk ± 14,700 m/s² pk 30 pc/g (± 15 %) 3.1 pc/(m/s²) ± 1500 g pk ± 14,700 m/s² pk Frequecy Rage (+5 %) 12,000 Hz 10,000 Hz 6000 Hz 6000 Hz Resoat Frequecy 50 khz 50 khz 23 khz 23 khz Evirometal overload Limit (Shock) operatig Temperature Electrical ± 98,100 m/s² pk -95 ºF to +500 ºF -70 ºC to +260 ºC ± 98,100 m/s² pk -95 ºF to +500 ºF -70 ºC to +260 ºC ± 6000 g pk ± 58,860 m/s² pk -95 ºF to +500 ºF -70 ºC to +260 ºC ± 6000 g pk ± 58,860 m/s² pk -95 ºF to +500 ºF -70 ºC to +260 ºC Capacitace 485 pf 700 pf 930 pf 930 pf output Polarity Negative Negative Negative Negative Sesig Elemet Ceramic Ceramic Ceramic Ceramic Sesig Geometry Shear Shear Shear Shear Housig Material Titaium Titaium Titaium Titaium Size (Hex x Height) Weight 0.28 i x 0.33 i 7.1 mm x 8.4 mm oz 2.0 gm 0.23 i x.65 i x 0.38 i 5.8 mm x 16.4 mm x 9.6 mm (Height x Legth x Width) 0.08 oz 2.3 gm 5/8 i x 0.85 i 5/8 i x 21.6 mm 0.73 oz 21 gm 5/8 i x 1.16 i 5/8 i x 29.3 mm Electrical Coector 5-44 Coaxial 5-44 Coaxial Coaxial Jack Coaxial Jack Electrical Coector Positio Side Side Side Top Moutig Thread 5-40 Male Through Hole Female Female 0.73 oz 21 gm 12 Aerospace & Defese Divisio

13 Evirometal Test High Temperature Charge Mode Accelerometers Because of its temperature ad high/complex vibratio eviromet, the turbie egie measuremet eviromet is perhaps the most demadig applicatio for accelerometers. With 30 years of high temperature measuremet experiece, PCB has developed a rage of piezoelectric materials ad techologies that provide accurate, reliable measuremets i this challegig eviromet. With the cost (ad o-repeatability) of each turbie egie test, PCB s customers have come to expect ad rely o this accuracy ad reliability of our sesors. High Temperature Charge Mode Accelerometers Model Number 356A70 356A71 357B69 357B61 357D90 Performace Sesitivity(± 30 %) Measuremet Rage 2.7 pc/g 0.28 pc/(m/s²) ± 4905 m/s² pk 10 pc/g 1.02 pc/(m/s²) ± 4905 m/s² pk 3.5 pc/g (± 10 %) pc/(m/s²) ± 4905 m/s² pk 10 pc/g 1.02 pc/(m/s²) ± 1000 g pk ± 9810 m/s² pk 5 pc/g (± 10 %) 0.51 pc/(m/s²) ± 1000 g pk ± 9800 m/s² pk Frequecy Rage(+5 %) 5000 khz 5000 Hz 6000 Hz 5000 Hz 2500 Hz Evirometal overload Limit (Shock) Temperature Rage Electrical ± 49,000 m/s² pk -95 to +490 F -70 to +254 C ± 49,000 m/s² pk -95 to +490 F -70 to +254 C ± 3000 g pk ± 29,420 m/s² pk -65 to +900 F -54 to +482 C ± 49,000 m/s² pk -65 to +900 F -54 to +482 C ± 2000 g pk ± 19,600 m/s² pk -67 to F -55 to +649 C Capacitace 240 pf 690 pf 196 pf 630 pf 990 pf Isulatio Resistace (at 70 F [21 C]) >10 12 ohm >10 12 ohm >10 9 ohm >10 8 ohm 10 7 ohm output Polarity Negative Negative Negative Negative Negative Sesig Geometry Shear Shear Compressio Compressio Shear Housig Material Titaium Titaium Icoel Icoel Icoel Size (Legth x Width x Height) Weight 0.73 i x 0.90 i x 0.40 i 18.5 mm x 22.9 mm x 10.2 mm 0.28 oz 7.9 gm 0.96 i x 1.00 i x 0.50 i 24.4 mm x 25.4 mm x 12.7 mm 0.8 oz 22.7 gm i x 0.45 i 22.2 mm x 11.4 mm (Hex x Dia) 0.56 oz 16 gm 5/8 i x 1.0 i 5/8 i x 25.4 mm (Hex x Height) 1.1 oz 30 gm 0.66 i x 1.26 i x 0.66 i 16.7 mm x 32.0 mm x 16.7 mm (Height x Legth x Width) 1.8 oz 50 gm Electrical Coector 5-44 Coaxial Coaxial Jack Coaxial Jack Coaxial Jack Itegral Hardlie Cable Moutig Through Hole Through Hole Female Female Through Hole Aerospace & Defese Divisio

14 Evirometal Test Cryogeic ICP Accelerometers PCB offers specially desiged ad tested ICP accelerometers for coductig vibratio measuremets uder demadig coditios. Laser welded, hermetically sealed housigs offer further protectio from the eviromet. Series 351 accelerometers address cryogeic applicatios to ºF (- 196 ºC). Prior to shipmet, each sesor udergoes a series of temperature cyclig tests i additioal to a fial calibratio. Applicatios: Cryogeic Pumps Rocket Motors Refrigerat Hadlig Cryogeic ICP Accelerometers Model Number 351B03 351B04 351B11 351B41 351B42 Performace Sesitivity (± 10 %) Measuremet Rage 1.02 mv/(m/s²) ± 150 g pk ± 1472 m/s² pk 1.02 mv/(m/s²) ± 150 g pk ± 1472 m/s² pk 5 mv/g 0.51 mv/(m/s²) ± 300 g pk ± 2943 m/s² pk 100 mv/g 10.2 mv/(m/s²) ± 15 g pk ± 147 m/s² pk 100 mv/g 10.2 mv/(m/s²) ± 15 g pk ± 147 m/s² pk Frequecy Rage (± 5 %) 1 to 6000 Hz 1 to 6000 Hz 1 to 10,000 Hz 1 to 2000 Hz 1 to 2000 Hz Resoat Frequecy 35 khz 35 khz 40 khz 15 khz 15 khz Broadbad Resolutio Evirometal overload Limit (Shock) Temperature Rage (operatig) Electrical 0.01 g rms 0.1 m/s² rms ± 49,050 m/s² pk -320 to +250 F -196 to +121 C 0.01 g rms 0.1 m/s² rms ± 49,050 m/s² pk -320 to +250 F -196 to +121 C 0.01 g rms 0.1 m/s² rms ± 98,100 m/s² pk -320 to +250 F -196 to +121 C g rms m/s² rms ± 1000 g pk ± 9810 m/s² pk -320 to +250 F -196 to +121 C g rms m/s² rms ± 1000 g pk ± 9810 m/s² pk -320 to +250 F -196 to +121 C Excitatio voltage 20 to 30 vdc 20 to 30 vdc 20 to 30 vdc 20 to 30 vdc 20 to 30 vdc output Impedace 100 ohm 100 ohm 100 ohm 100 ohm 100 ohm output Bias voltage 3 to 10 vdc 3 to 10 vdc 3 to 10 vdc 3 to 10 vdc 3 to 10 vdc Weight 0.38 oz 10.5 gm 0.38 oz 10.5 gm Sesig Elemet Quartz Quartz Quartz Quartz Quartz Sesig Geometry Shear Shear Shear Shear Shear Housig Material Titaium Titaium Titaium Titaium Titaium Electrical Coector Coaxial Jack Coaxial Jack 5-44 Coaxial Jack Coaxial Jack Coaxial Jack 0.07 oz 2.0 gm 1.4 oz 40 gm 1.4 oz 40 gm 14 Aerospace & Defese Divisio

15 Evirometal Test Force Limited Vibratio Testig Systems Easy ad Accurate Measuremet of the Iput Force Due to the high cost, log developmet times, ad uiqueess of sophisticated aerospace ad other high-tech equipmet, it has become imperative to implemet techiques that esure the safety of such items durig vibratio qualificatio testig. Covetioal cotrol usig acceleratio has bee show to cause sigificat over-testig that may result i damage to the uit uder test (UUT). I force limited vibratio testig, the total iput force to the UUT is measured ad cotrolled, thereby limitig the quasi-static acceleratio of the ceter-of-gravity ad esurig the itegrity of the equipmet. The PCB Force Limited vibratio Testig System meets the requiremets for limitig the reactio force betwee the shaker ad uit uder test i radom vibratio testig. The use of piezoelectric, 3-compoet force sesors facilitates easy ad accurate measuremet of the iput force. This force relates directly, usig Newto s Secod Law, F=ma, to the quasi-static acceleratio of the structure s ceter-of-gravity. Sice desig loads for aerospace equipmet are ofte give i terms of the quasi-static acceleratio, the use of force sesors represets a ideal measuremet approach for this applicatio. Force sesors may also be used with low outgassig accelerometers i thermal vacuum chambers. Highlights: Applicatios: 3-Compoet ICP & Charge Output Quartz Force Rigs Miimizes over-testig Reduces risk of damage to critical structures Measures summed forces Measures force differeces (momets) Simplifies ad expedites the test process Coveiet ad easy to implemet ICP & Charge output 3-Compoet ICP & Charge Output Quartz Force Rigs Force Limited vibratio Testig Cuttig Tool Forces Force Dyamometer Egie Mout Aalysis Biomechaics Modal Aalysis Model Number 260A01 260A02 260A03 260A11 260A12 260A13 Measuremet Rage (z axis) Measuremet Rage (x or y axis) Sesitivity (z axis) Sesitivity (x or y axis) Maximum Force (z axis) Maximum Force (x or y axis) Maximum Momet (z axis) Maximum Momet (x or y axis) Broadbad Resolutio (z axis) Broadbad Resolutio (x or y axis) Note ± 1000 lb ± 4.45 kn ± 500 lb ± 2.22 kn 2.5 mv/lb 0.56 mv/n 10 mv/lb 2.25 mv/n 1320 lb 5.87 kn 660 lb 2.94 kn 14 ft-lb N-m 13 ft-lb N-m lb-rms N-rms lb-rms N-rms ± 1000 lb ± 4.45 kn ± 1000 lb ± 4.45 kn 2.5 mv/lb 0.56 mv/n 5 mv/lb 1.12 mv/n 1320 lb 5.87 kn 1000 lb 4.45 kn 40 ft-lb N-m 70 ft-lb N-m lb-rms N-rms lb-rms N-rms [1] Resolutio is depedet upo cable legth ad charge amplifier characteristics ± 10,000 lb ± kn ± 4000 lb ± kn 0.25 mv/lb 0.06 mv/n 1.25 mv/lb 0.28 mv/n 11,000 lb kn 4400 lb kn 240 ft-lb N-m 325 ft-lb N-m 0.05 lb-rms N-rms 0.01 lb-rms 0.04 N-rms ± 1000 lb ± 4.45 kn ± 500 lb ± 2.22 kn 15 pc/lb 3.37 pc/n 32 pc/lb 7.19 pc/n 1320 lb 5.87 kn 660 lb 2.94 kn 14 ft-lb N-m 13 ft-lb N-m ± 1000 lb ± 4.45 kn ± 1000 lb ± 4.45 kn 15 pc/lb 3.37 pc/n 32 pc/lb 7.19 pc/n 1320 lb 5.87 kn 1000 lb 4.45 kn 40 ft-lb N-m 70 ft-lb N-m ± 10,000 lb ± kn ± 4000 lb ± 17.7 kn 15 pc/lb 3.37 pc/n 32 pc/lb 7.19 pc/n 11,000 lb kn 4400 lb kn 240 ft-lb N-m 325 ft-lb N-m [1] [1] [1] [1] [1] [1] Aerospace & Defese Divisio

16 Evirometal Test 3-Compoet ICP & Charge Output Quartz Force Liks 3-Compoet ICP & Charge Output Quartz Force Liks Model Number 261A01 261A02 261A03 261A11 261A12 261A13 Measuremet Rage (z axis) ± 1000 lb ± 4.45 kn ± 1000 lb ± 4.45 kn ± 10,000 lb ± kn ± 1000 lb ± 4.45 kn ± 1000 lb ± 4.45 kn ± 10,000 lb ± kn Measuremet Rage (x or y axis) ± 500 lb ± 2.22 kn ± 1000 lb ± 4.45 kn ± 4000 lb ± kn ± 500 lb ± 2.22 kn ± 1000 lb ± 4.45 kn ± 4000 lb ± 17.7 kn Sesitivity (z axis) 2.5 mv/lb 0.56 mv/n 2.5 mv/lb 0.56 mv/n 0.25 mv/lb 0.06 mv/n 15 pc/lb 3.37 pc/n 15 pc/lb 3.37 pc/n 15 pc/lb 3.37 pc/n Sesitivity (x or y axis) 10 mv/lb 2.25 mv/n 5 mv/lb 1.12 mv/n 1.25 mv/lb 0.28 mv/n 32 pc/lb 7.19 pc/n 32 pc/lb 7.19 pc/n 32 pc/lb 7.19 pc/n Maximum Force (z axis) 1320 lb 5.87 kn 1320 lb 5.87 kn 11,000 lb kn 1320 lb 5.87 kn 1320 lb 5.87 kn 11,000 lb kn Maximum Force (x or y axis) 660 lb 2.94 kn 1000 lb 4.45 kn 4400 lb kn 660 lb 2.94 kn 1000 lb 4.45 kn 4400 lb kn Maximum Momet (z axis) 14 ft-lb N-m 40 ft-lb N-m 240 ft-lb N-m 14 ft-lb N-m 40 ft-lb N-m 240 ft-lb N-m Maximum Momet (x or y axis) 13 ft-lb N-m 70 ft-lb N-m 325 ft-lb N-m 13 ft-lb N-m 70 ft-lb N-m 325 ft-lb N-m Broadbad Resolutio (z axis) lb-rms N-rms lb-rms N-rms 0.05 lb-rms N-rms [1] [1] [1] Broadbad Resolutio (x or y axis) lb-rms N-rms lb-rms N-rms 0.01 lb-rms 0.04 N-rms [1] [1] [1] Note [1] Resolutio is depedet upo cable legth ad charge amplifier characteristics Sigal Coditioig System Compoet Specificatios Model 443B102 Dual-Mode Amplifier Module Chaels 1 Display (Meu Drive) Backlit 2 16 character LCD voltage Gai (ICP Sesor Mode) 0.1 to 1000 (4-digit resolutio) Charge Gai (Charge Mode) 0.1 to mv/pc (4-digit resolutio) Discharge Time Costat 0.18, 1.8, 10, 100, 1000, > 100k sec Drift [1] < 0.03 pc/sec Broadbad Noise (ICP Sesor Mode) [2] (2 Hz to 22.4 khz) < 3 µv (< db) Broadbad Noise (Charge Mode) [3] (2 Hz to 22.4 khz) < 5 fc (< pc) Low Frequecy Respose (-10%) 2, 0.2, 0.03, 0.003, ~0 Hz High Frequecy Respose (-10%) 0.1,1, 3, 10, 100, >200 khz Model 070A15 Summig Block Iput 4-Chaels of Charge Iput output 1-Chael of Summed Charge output Model 070M70 Charge Summatio Node Module Iput 8-Chaels of charge mode sesor sigals Summed output (Charge Mode) 1-Chael (A + B + C + D + E + F + G + H) Model 070M69 Computatioal Sigal Coditioer Iput 8-Chaels of ICP sesor or voltage sigals Computatioal Fuctio [(A-B) + (C-D) + (E-F) + (G-H)] Gai Excitatio voltage (for ICP Sesors) 24 vdc Excitatio Curret (Selectable) 0, 2, 4, 8, 12, 20 ma Differeced output 4-Chaels: (A-B), (C-D), (E-F), (G-H) Fuctio output 1-Chael Gai 0.1, 1, 10 Model 070M90 12-Chael Summig Amplifier Iput 12-Chaels of ICP sigals Excitatio voltage (for ICP Sesors) 24 vdc Excitatio Curret 2 to 20 ma adjustable output 1-Chael Gai x0.1, x1, x10 Notes: [1] Log discharge time costat mode. [2] Measured at gai of 1000 (60 db), iput referred. [3] Measured at gai of 10 v/pc (80 db) with a 1 F source capacitace, iput referred. Combied System Model 443B102 Dual-Mode Amplifier Module Model 070A15 Summig Block for Charge Mode Sesors Model 070M70 Charge Summatio Node Module Model 070M69 Computatioal Sigal Coditioer Model 070M90 Summig Amplifier for ICP Sesors 16 Aerospace & Defese Divisio

17 Evirometal Test Extreme Eviromet ICP & Charge Output Pressure Sesors Water Cooled, Helium Bleed Pressure Sesors Series 123 rocket motor sesors are desiged for measurig dyamic combustio istability pressures i itese heat flow associated with high temperature rocket motor eviromets. The sesors are suited for log duratio measuremets i eviromets where a severe ad rapid temperature icrease i the sesor moutig locatio or high soakig temperature after rocket motor shut dow exists. Sesors icorporate helium bleed, water coolig costructio. The helium bleed desig ivolves evelopig the case ad diaphragm of a miiature quartz sesor with a cool flow of helium gas. The gas cools the sesor ad isulates the uit from hot combustio gases, while cleaig ad improvig the frequecy respose of the coectig passage. Available i ICP ad charge desigs, a ceramic-coated ed piece protects the sesor from the itese flow ad combustio gasses. Highlights: Ability to withstad itese heat at sesor tip [1] Sesor diaphragm eveloped i cool, helium gas Water coolig adaptor for greater thermal stability Itegral acceleratio compesatio to reduce uwated vibratio sesitivity Helium flow icreases frequecy respose of the short coectig passage Ceramic coated diaphram for thermal protectio Applicatios Combustio Dyamics Istabilities Pulsatios Water Cooled, Helium Bleed Pressure Sesors Model Number 123A 123A21 123A22 123A23 123A24 Performace Sesitivity (± 15 %) Measuremet Rage Maximum Pressure Evirometal Acceleratio Sesitivity Temperature Rage (operatig) [1] Maximum Shock Electrical 1.0 pc/psi mv/kpa 3 kpsi 20,685 kpa 5 kpsi 34,475 kpa psi/g kpa/(m/s²) -450 to +500 F -73 to +121 C 10,000 g pk 98,070 m/s² pk 20 mv/psi 2.90 mv/kpa 250 psi 1724 kpa (for ±5v output) 5 kpsi 34,475 kpa psi/g kpa/(m/s²) -100 to +250 F -73 to +121 C 10,000 g pk 98,070 m/s² pk 1.0 mv/psi mv/kpa 3 kpsi 20,685 kpa (for ± 3v output) 5 kpsi 34,475 kpa psi/g kpa/(m/s²) -100 to +250 F -73 to +121 C 10,000 g pk 98,070 m/s² pk 0.5 mv/psi 0.07 mv/kpa 10 kpsi 68,950 kpa 20 kpsi 137,900 kpa psi/g kpa/(m/s²) -100 to +250 F -73 to +121 C 10,000 g pk 98,070 m/s² pk 5.0 mv/psi mv/kpa 1 kpsi 6895, kpa (for ±5v output) 5 kpsi 34,475 kpa psi/g kpa/(m/s²) -100 to +250 F -73 to +121 C 10,000 g pk 98,070 m/s² pk output Polarity (Positive Pressure) Negative Positive Positive Positive Positive Housig Material 17-4 Stailess Steel 17-4 Stailess Steel 17-4 Stailess Steel 17-4 Stailess Steel 17-4 Stailess Steel Diaphragm Ivar Ivar Ivar Ivar Ivar Electrical Coector Itegral Cable Itegral Cable Itegral Cable Itegral Cable Itegral Cable Cable Legth Weight Note 4 ft 1.2 m 4.23 oz 120 gm 4 ft 1.2 m 4.23 oz 120 gm [1] Whe maitaied with water coolig flow ad helium bleed per factory specificatio. 4 ft 1.2 m 4.23 oz 120 gm 4 ft 1.2 m 4.23 oz 120 gm 4 ft 1.2 m 4.23 oz 120 gm Aerospace & Defese Divisio

18 Evirometal Test PCB High Temperature Charge Ouput Sesors PCB High Temperature quartz dyamic pressure sesors are desiged for operatio at the highest temperatures. They are structured with quartz crystals ad operate, without coolig, up to +750 F (+399 C) o compressors ad pumps. Special moutig adaptors ca be supplied to fit existig moutig holes. Water cooled adaptors are available to provide a lower temperature thermally stable eviromet that allow sesors to operate i applicatios above their ormal operatig rage. Hard-lie cables are recommeded for operatig temperatures above +500 F (+260 C). The cable ca be welded to the sesor for operatio i pressurized eviromets. All of these features esure reliable operatio i high temperature eviromets. Highlights: PCB Cryogeic ICP Pressure Sesors PCB Cryogeic quartz dyamic pressure sesors are a high resolutio ICP pressure sesor desig, specially made for cryogeic eviromets. They cosistetly follow dyamic evets foud i cryogeic turbo pumps for liquid fuel hadlig systems or biomedical research. Highlights: Laser welded, hermetically sealed quartz sesig elemets Fused ceramic isulatio coectors Iteral acceleratio compesatio miimizes vibratio sesitivity Calibratio supplied at room temperature with thermal coefficiets up to +750 F (+399 C) Fast rise time of 2 μsec from quartz elemet, with high resoat frequecy 250 khz Welded, hermetically sealed, stailess steel costructio Electrically groud isolated, which helps prevet groud loop challeges Calibratio supplied at room temperature with thermal coefficiets dow to -320 F (-196 C) Model 064B01 Product Type: Accessory, Thread Adaptor Water-cooled adaptor, sesor recess mout, 1/2-20 Exteral thd, 1.0 hex (for Model 112A05) Model 064B06 Product Type: Accessory, Thread Adaptor Water-cooled adaptor, sesor recess mout, M20 x 1.5 Exteral thd, 1.25 hex (for Model 116B) other versios are available High Temperature Cryogeic ATEX Model Number 112A05 116B 176M03 102A10 102A14 Performace Sesitivity (± 15 %) Measuremet Rage Maximum Pressure (static) 1.1 pc/psi pc/kpa (-10 to +25 %) 5,000 psi 34,475 kpa 10,000 psi 68,950 kpa 6 pc/psi pc/kpa 100 psi 690 kpa 3,000 psi 20,685 kpa 17 pc/psi 2.47 pc/kpa (± 20 %) 20 psi kpa 400 psi 2758 kpa 50 mv/psi 7.25 mv/kpa 100 psi 690 kpa 15,000 psi 103,425 kpa 1.0 mv/psi mv/kpa 5,000 psi 34,475 kpa 15,000 psi 103,425 kpa Resoat Frequecy 200 khz 55 khz >50 khz 250 khz 250 khz Evirometal Acceleratio Sesitivity Temperature Rage (operatig) psi/g kpa/(m/s²) -400 to +600 F -240 to +316 C.002 psi/g.0014 kpa/(m/s²) -400 to 650 F -240 to 345 C 0.01 psi/g kpa/(m/s²) 986 F 530 C psi/g kpa/(m/s²) -320 to +212 F -196 to +100 C psi/g kpa/(m/s²) -320 to +212 F -196 to +100 C Housig Material 17-4 Stailess Steel 316L Stailess Steel Icoel Stailess Steel Stailess Steel Electrical Coector Coaxial Jack Coaxial Jack 2-Pi Coaxial Jack Coaxial Jack Weight oz 6.0 gm oz 20.3 gm 18 Aerospace & Defese Divisio oz 140 gm oz gm oz gm

19 Evirometal Test Uderwater High Itesity Acoustic ICP Pressure Sesors Uderwater Sesors Noise source detectio ad idetificatio methods are used to determie the acoustic stealth of uderwater vessels. All of a vessel s oise sources must be measured ad idetified, icludig o-board equipmet, cavitatio of the propulsio system, persoel ad other sources of radiated oise. PCB has extesive experiece with uderwater oise, vibratio ad pressure measuremets. our experiece with uderwater testig ca be used i specific applicatios for measurig ad idetifyig oise sources, such as: Iterior ad exterior oise idetificatio Noise ad vibratio moitorig Noise level assessmet of vessels Acoustic pressure sesor arrays High Itesity Acoustic ICP Pressure Sesors Highlights: Waterproof, pressure tested cables ca be over-molded directly to the sesor ICP voltage output or costat voltage lie driver (CvLD) curret output operates through log cables with low oise Electrical case isolatio for the lowest possible oise Corrosio resistat costructio Model Number 103B01 106B 112A22 113B28 Performace Measuremet Rage(± 5 v output) Sesitivity(± 15 %) Maximum Pressure 3.33 psi 181 db 1500 mv/psi mv/kpa 250 psi 1725 kpa 8.3 psi 57.2 kpa (for ±2.5v output) 300 mv/psi 43.5 mv/kpa 200 psi 1379 kpa 50 psi 345 kpa 100 mv/psi 14.5 mv/kpa 500 psi 3450 kpa 50 psi 345 kpa 100 mv/psi 14.5 mv/kpa 1,000 psi 690 kpa Resoat Frequecy 13 khz 60 khz 250 khz 500 khz Rise Time 25 µ sec 9 µ sec 2.0 µ sec 1.0 µ sec Low Frequecy Respose(-5 %) 5 Hz 0.5 Hz 0.5 Hz 0.5 Hz Evirometal Acceleratio Sesitivity Temperature Rage (operatig) psi/g psi/(m/s 2 ) -100 to 250 F -73 to +121 C psi/g psi/(m/s 2 ) -54 to +121 C psi/g psi/(m/s 2 ) -100 to +275 F -73 to +135 C psi/g psi/(m/s 2 ) -100 to +275 F -73 to +135 C Maximum Shock 1000 g pk 2000 g pk 20,000 g pk 20,000 g pk Electrical output Polarity (Positive Pressure) Positive Positive Positive Positive Excitatio voltage 20 to 30 vdc 12 to 30 vdc 22 to 30 vdc 22 to 30 vdc output Impedace 100 ohm 100 ohm < 100 ohm < 100 ohm Sesig Elemet Ceramic Quartz Quartz Quartz Diaphragm 316L Stailess Steel 316L Stailess Steel Ivar Ivar Electrical Coector Itegral Cable Coaxial Jack Coaxial Jack Coaxial Jack Weight oz gm 0.63 oz 18.0 gm 0.21 oz 6.0 gm 0.16 oz 4.5 gm Aerospace & Defese Divisio

20 Evirometal Test ICP Accelerometers Waterproofig ad Alterate Electrical Output Optios Are Available Uderwater ICP Accelerometers For Dry Areas For Wet Areas Model Number 355B02 355B03 625B11 629A11 Performace Sesitivity(± 10 %) Measuremet Rage 1.02 mv/(m/s²) ±4900 m/s² pk 100 mv/g mv/(m/s²) ± 50 g pk ±490 m/s² pk 100 mv/g mv/(m/s²) (± 5 %) ± 50 g pk ±490 m/s² pk 100 mv/g mv/(m/s²) (± 5 %) ± 50 g pk ±490 m/s² pk Frequecy Rage(± 5 %) 1 to 10,000 Hz 1 to 10,000 Hz 0.5 to 5000 Hz 0.8 to 8000 Hz Resoat Frequecy 35 khz 35 khz 25 khz 20 khz Evirometal overload Limit 5000 g pk 5000 g pk Temperature Rage -54 to +121 F -54 to +121 F -54 to +121 F -54 to +121 F Electrical Excitatio voltage 22 to 30 vdc 18 to 30 vdc 18 to 28 vdc 18 to 28 vdc output Impedace 100 ohm 200 ohm < 100 ohm < 100 ohm output Bias voltage 7 to 15 vdc 7 to 13 vdc 8 to 12 vdc 8 to 12 vdc Size (Height x Legth x Width) Weight 0.40 i x 0.95 i x 0.63 i 10.2 mm x 24.1 mm x 16.0 mm 0.35 oz 10 gm 0.40 i x 0.95 i x 0.63 i 10.2 mm x 24.1 mm x 16.0 mm 0.35 oz 10 gm 1.38 i x 1.13 i 35.1 mm x 28.7 mm (Diameter x Height) 4.7 oz 133 gm 0.82 i x 1.5 i x 1.5 i 20.8 mm x 38.1 mm x 38.1 mm Sesig Elemet Ceramic Ceramic Ceramic Ceramic Housig Material Titaium Titaium Stailess Steel Stailess Steel Moutig Through Hole Through Hole Through Hole 1/4-28 Male 4.9 oz 139 gm 20 Aerospace & Defese Divisio

21 Evirometal Test The Modal Shop, a PCB Group Compay based i Ciciati, ohio, USA, offers a complete lie of electrodyamic modal ad vibratio shakers ideal for applicatios ragig from experimetal modal aalysis ad geeral vibratio testig to accelerometer calibratio. Shakers are also available through the TMS Retal Program i additio to accelerometers, force sesors, hammers, microphoes ad soud level meters. As a global leader i soud ad vibratio, The Modal Shop is PCB Group s focal poit for a comprehesive product rage of dyamic calibratio systems. visit for more iformatio. Toll-free i USA (800) Calibratio of Sesors for Evirometal Test Model 9155 Accelerometer Calibratio Workstatio The Accelerometer Calibratio Workstatio, Model 9155, from The Modal Shop features accurate back-to-back compariso calibratio of ICP (IEPE), ad charge mode piezoelectric accelerometers i accordace with ISo The 9155 system ca also calibrate piezoresistive, capacitive, ad velocity sesors via available optios. other cofiguratios offer automated TEDS sesor updatig, liearity checkig, low frequecy calibratio dow to 0.1 Hz, shock calibratio, resoace, dyamic pressure ad a host of shaker optios. Precisio Calibratio Grade Air-bearig Model 9155D-830 Precisio air-bearig shaker with usable frequecy rage of 5 Hz to 15 khz Ultra-low trasverse motio per ISo recommedatios Low Frequecy Log Stroke Model 9155D-771 Allows low frequecy calibratio data to 0.5 Hz Calibrate high sesitivity sesors to lower frequecies with idustry leadig usable stroke of 25 cm Precisio air-bearig log stroke shaker High-G Shock Calibratio Model 9155D-525 Provides calibratio ad liearity check from 20 g-pk to 10,000 g-pk per ISo (2005). Peumatically actuated excited provides cotrolled ad cosistet impacts Compatible with stadard back-to-back shock referece accelerometer Model 9110D Portable Vibratio Calibrator Ideal for checkig accelerometers, velocity trasducers ad proximity probes over a wide frequecy ad amplitude operatig rage, the Model 9100D Portable vibratio Calibrator from The Modal Shop is rugged throughout, with simple ad elegat usability ad robust iteral compoets. I cotrast to more elaborate laboratory style systems, the 9100D is a portable vibratio shaker ad calibrator, makig it perfect for testig i the field or at a customer s site. Small ad completely self-cotaied Supports calibratio for sesors up to 800 grams Battery powered with extesive life Ruggedized, weatherproof eclosure dramatically improves durability ad portability Precisio quartz referece accelerometer ad coditioig electroics for superior cotrol ad stability Itegrated ICP -Powersupply for UUT Rugged carbo fiber composite armature flexures Provides NIST/PTB traceable trasducer verificatio Iteral Memory ad USB-Flash drive output PCB Model 394C06 Hadheld Shaker The Model 394C06 Hadheld Shaker from PCB Piezotroics is a small, self-cotaied, battery powered vibratio exciter specifically desiged to coveietly verify accelerometer ad vibratio system performace. It accepts sesors weighig up to 210 grams ad delivers a cotrolled 1 g mechaical excitatio. Aerospace & Defese Divisio

22 Photo Courtesy of Spectrum Techologies Evirometal Test Stock Cables Series 002C Series 003A Series 012A Series 018C Series 030A Coaxial Cable Specificatios Model Cable Style Geeral Purpose Low Noise Temperature Rage -130 to +400 F -90 to +204 C -320 to +500 F -196 to +260 C 50 ohm 29 pf/ft 95 pf/m FEP i 1.9 mm 50 ohm 30 pf/ft 98 pf/m TFE i 2.01 mm Geeral Purpose -40 to +176 F -40 to +80 C 52 ohm 29 pf/ft 95 pf/m PvC i 4.9 mm Geeral Purpose -22 to +221 F -30 to +105 C 32 ohm 55 pf/ft 180 pf/m PvC i 1.37 mm Low Noise -130 to +500 F -90 to +260 C 50 ohm 30 pf/ft 98 pf/m FEP i 1.09 mm Impedace Capacitace Cable Jacket Material Cable Jacket Diameter Series 034D Series 019 Series 010G Series 010F Series 036 Series 034K 4-Coductor Cable Specificatios Model Cable Style Temperature Rage Capacitace Cable Jacket Material Cable Jacket (Diameter) Geeral Purpose Low Noise Flexible Lightweight Flexible Flexible -130 to +392 F -90 to +200 C 16 pf/ft 52.4 pf/m -130 to +392 F -90 to +200 C 14 pf/ft 46 pf/m -76 to +500 F -60 to +260 C 15 pf/ft 49.2 pf/m -76 to +392 F -60 to +200 C 15 pf/ft 48 pf/m -58 to +185 F -50 to +85 C 25 pf/ft 81 pf/m FEP FEP Silicoe Silicoe Polyurethae 0.1 i 2.54 mm i 1.96 mm i 1.77 mm i 2.64 mm i 3.02 mm Idustrial Cable Cofiguratios* 052BR Two-coductor shielded twisted pair cable with polyurethae jacket, molded-composite 2-socket MIL to blut cut * Stock Cables are ot covered uder the Platium Stock Product Lifetime Warraty + Delivery Now Program. 052BQ Two-coductor shielded twisted pair cable with polyurethae jacket, right-agle molded composite 2-socket MIL to blut cut 052AE Two-coductor shielded twisted pair cable with polyurethae jacket, push-o 2-socket MIL with evirometal boot to blut cut Please cotact PCB for iformatio o cable ad coector cofiguratios. All may be supplied at your desired legth. 22 Aerospace & Defese Divisio BR High temperature FEP cable, composite 2-socket MIL to blut cut

23 Evirometal Test Low Outgassig Cables Suitable for Thermal Vacuum Chamber Exposure Cotact the factory for additioal cable legths Cables for Sigle Axis Accelerometers 003A10 003M M252 Coectig cable Low-oise, coaxial TFE 10-ft, 5-44 plug to plug 030A10 Coectig cable Low-oise, coaxial FEP 10-ft, 3-56 plug to plug Coectig cable Low-oise, coaxial TFE 10-ft, plug to plug 003M269/010 Coectig cable Low-oise, coaxial TFE 10-ft, plug to BNC plug 003M204 Low-oise, coaxial TFE 2-meter, 2-socket MS3106 to BNC plug For 2-pi MIL coectors 030B10 Coectig cable Low-oise, coaxial FEP 10-ft, M3 plug to jack Low-oise, coaxial TFE 5-ft, 2-socket MS3106 to pigtails For 2-pi MIL coectors 030EK010PH Coectig cable Low-oise, coaxial FEP 10-ft, 3-56 plug to jack Cables for Triaxial Accelerometers 034M22 Sesor coectig cable 4-coductor shielded, FEP 20-ft, 4-pi 1/4-28 plug to (3) BNC plugs 034M21 Sesor coectig cable 4-coductor shielded, FEP 20-ft, mii 4-pi 3-36 plug to (3) BNC plugs 034M51 034M28/020 Extesio cable 4-coductor shielded, FEP 40 ft, 4-pi 1/4-28 plug to 4-pi 1/4-28 plug Sesor coectig cable 4-coductor shielded, FEP 20-ft, 4 pi 1/4-28 plug to (3) plugs 010M128/040 Extesio cable 4-coductor shielded, FEP 40-ft, 4-pi 1/4-28 plug to 4-pi 1/4-28 jack Aerospace & Defese Divisio

24 Applicatio Please see these PCB Piezotroics catalogs for your other Aerospace & Defese applicatios: Groud Test Flight Test OEM Capabilities Explosive, Gu ad Impact Testig For our complete lie of sesors, see our Test & Measuremet Catalog. The Global Leader i Sesors ad Istrumetatio For All Your Applicatios Toll-Free i USA automotivesales@pcb.com Toll-Free i USA imi@pcb.com Toll-Free i USA ifo@pcb.com 3425 Walde Aveue, Depew, NY USA 24-hour SesorLie SM Fax aerosales@pcb.com Web Site AS9100 CERTIFIED ISo 9001 CERTIFIED A2LA ACCREDITED to ISo PCB Group, Ic. I the iterest of costat product improvemet, specificatios are subject to chage without otice. PCB, ICP, Modally Tued, Spidler, Swiveler ad ToRKDISC are registered trademarks of PCB Group. SoudTrack LXT, Spark ad Blaze are registered trademarks of PCB Piezotroics. SesorLie is a service mark of PCB Group. All other trademarks are properties of their respective owers. AD-ENvIRoNMENTAL-1112 Prited i U.S.A.