AOZ Ω Low-Voltage Dual-DPDT Analog Switch. General Description. Features. Applications AOZ6275
|
|
- Gabriel Dorsey
- 6 years ago
- Views:
Transcription
1 .35Ω Low-Voltage Dual-DPDT nalog witch General Description The OZ6275 is a dual Double-Pole, Double-Throw (DPDT) analog switch that is designed to operate from a single 1.65 V to 4.3 V supply. The OZ6275 features an ultra-low on resistance, excellent Total Harmonic Distortion (THD) performance, and low power consumption. The device also features fast switching and guaranteed Break-Before-Make (BBM) switching which interrupts one circuit before closing the other. This ensures the switches never shorts the driver. Features Low On Resistance (R ON ) for +2.7 V supply (.35 Ω) Low I CCT current when n input is lower than V CC.25 Ω maximum R ON flatness for +2.7 V supply mall 1.8 mm x 2.6 mm 16-Lead QFN Package Broad 1.65 V to 4.3 V V CC operating range Low THD (.1% typical for 32 Ω load) pplications Cell phone PD Portable media player Typical pplication Connection Diagram 1B tereo MP3 Player L+ L- R+ R- OZ6275 L+ L- 1 L 1B 1 2B 2B 1 3B Integrated Baseband Processor L+ L- R+ R- R+ R R- 2 3B 1 4B 4B Rev. 1. February Page 1 of 1
2 Ordering Information Part Number mbient Temperature Range Package Environmental OZ6275QI -4 C to +85 C 1.8 mm x 2.6 mm 16-Lead QFN Green O Green Products use reduced levels of Halogens, and are also RoH compliant. Please visit for additional information. Pin Configuration Pin Description 1 1B B B 1 6 V CC 7 4B 8 Pin Name Function 4 4B 1 1, 2, 3, 4, 1B, 1B 1, 2B, 2B 1, Data Ports 3B, 3B 1, 4B, 4B 1 1, 2 Control Input B Truth Table Logic Input Function 2B 3B 1 3 nb Connected to n 1 nb 1 Connected to n QFN-16 (Top Thru View) bsolute Maximum Ratings Exceeding the bsolute Maximum Ratings may damage the device. ymbol Parameter Rating V CC upply Voltage -.5 V to +4.6 V V witch Voltage -.5 to V CC +.3 V V IN Input Voltage -.5 V to +4.6 V I IK Minimum Input Diode Current -5 m I W witch Current 35 m I WPEK Peak witch Current (Pulsed at 1 ms duration, <1 % Duty Cycle) 5 m T TG torage Temperature Range -65 C to +15 C T J Maximum Junction Temperature +15 C T L Lead Temperature (oldering, 1 seconds) +26 C ED Human Body Model 8 V Recommend Operating Ratings The device is not guaranteed to operate beyond the Recommended Operating Ratings. ymbol Parameter Rating V CC upply Voltage 1.65 V to 4.3 V V IN Control Input Voltage (1) V to V CC V W witch Input Voltage V to V CC T Operating Temperature -4 C to +85 C Note: 1. Unused inputs must be held HIGH or LOW. They may not float. Rev. 1. February Page 2 of 1
3 DC Electrical Characteristics Unless otherwise indicated, specifications indicate a temperature range of -4 C to +85 C. ll typical values are at 25 C unless otherwise specified. ymbol Parameter Conditions V CC (V) Min. Typ. Max. Units V IH Input Voltage HIGH V 2.7 to to to V IL Input Voltage LOW V 2.7 to to to I IN Control Input Leakage V IN = V to V CC 1.65 to µ I NO(OFF), Off-Leakage Current of Port n =.3 V, V CC.3 V, 1.95 to n I NC(OFF) nb and nb 1 nb or nb 1 =.3 V, V CC.3 V or floating I (ON) On Leakage Current of Port n =.3 V, V CC.3V, nb or nb 1 =.3 V, V CC.3 V or floating 1.95 to n R ON witch On Resistance (2) I OUT = 1 m, nb or nb 1 = V,.7 V, 2.3 V, or 4.3 V Ω I OUT = 1 m, nb or nb 1 = V,.7 V, 2.3 V, or 3. V I OUT = 1 m, nb or nb 1 = V,.7 V, 2. V, or 2.7 V I OUT = 1 m, nb or nb 1 = V,.7 V, 1.6 V, or 2.3 V I OUT = 1 m, nb or nb 1 = V, 1. V, or 1.8 V R ON On Resistance Matching I OUT = 1 m, Ω Between Channels (3) nb or nb 1 =.7 V R FLT(ON) On Resistance Flatness (4) I OUT = 1 m, Ω nb or nb 1 = V to V CC I CC Quiescent upply Current V IN = V to V CC, I OUT = n I CCT Increase in I CC per Input V IN = 1.8 V µ Control Voltage V IN = 2.6 V Notes: 2. On resistance is determined by the voltage drop between and B pins at the indicated current through the switch. 3. R ON = R ONmax R ONmin measured at identical V CC, temperature, and voltage. 4. Flatness is defined as the difference between the maximum and minimum value of R ON over the specified range of conditions. Rev. 1. February Page 3 of 1
4 C Electrical Characteristics Unless otherwise indicated, specifications indicate a temperature range of -4 C to +85 C. ll typical values are at 25 C unless otherwise specified. ymbol Parameter Conditions V CC (V) Min. Typ. Max. Units t ON Turn-On Time nb or nb 1 = 1.5 V, R L = 5 Ω, C L = 35 pf 3.6 to ns 2.7 to to t OFF Turn-Off Time nb or nb 1 = 1.5 V, R L = 5 Ω, C L = 35 pf 3.6 to ns 2.7 to to t BBM Break-Before-Make Time nb or nb 1 = 1.5 V, R L = 5 Ω, C L = 35 pf 3.6 to ns 2.7 to to Q Charge Injection C L = 1 pf, V GEN = V, R GEN = Ω 3.6 to pc 2.7 to to OIRR Off Isolation f = 1 khz, R L = 5 Ω, C L = 5 pf 3.6 to db 2.7 to to Xtalk Crosstalk f = 1 khz, R L = 5 Ω, C L = 5 pf 3.6 to db 2.7 to to BW -3dB Bandwidth R L = 5 Ω 2.3 to MHz THD Total Harmonic R L = 32 Ω, V IN = 2 V pp, f = 2 Hz to 2 khz 3.6 to % Distortion 2.7 to to Capacitance Unless otherwise indicated, specifications indicate a temperature range of -4 C to +85 C. ll typical values are at 25 C unless otherwise specified. ymbol Parameter Conditions V CC (V) Min. Typ. Max. Units C IN Control Pin Input Capacitance f = 1 MHz pf C OFF B Port Off Capacitance f = 1 MHz pf C ON Port On Capacitance f = 1 MHz pf Rev. 1. February Page 4 of 1
5 Typical Performance Characteristics 1.6 r D(on) vs. nalog 25 C rd(on) - Drain-ource On Resistance (mω) = 1.65V 1.8V 2.3V 2.7V 3.V 4.3V V D - nalog Voltage (V) rd(on) - Drain-ource On Resistance (mω) r D(on) vs. nalog 2.3V +85 C +25 C -4 C r D(on) - Drain-ource On Resistance (mω) r D(on) vs. nalog 2.7V +85 C +25 C -4 C V D - nalog Voltage (V) V D - nalog Voltage (V) rd(on) - Drain-ource On Resistance (mω) r D(on) vs. nalog 3.V C +25 C -4 C 3.5 r D(on) - Drain-ource On Resistance (mω) r D(on) vs. nalog 4.3V +85 C +25 C -4 C V D - nalog Voltage (V) V D - nalog Voltage (V) Rev. 1. February Page 5 of 1
6 Typical Performance Characteristics (Continued) Crosstalk and Off Isolation vs. Frequency Insertion Loss vs. Frequency Xtalk, OIRR (db) OIRR Insertion Loss (db) BW -8 Xtalk Frequency (MHz) Frequency (MHz) Rev. 1. February Page 6 of 1
7 C Loading and Waveforms V B Control Input V 5% t R = t = 2.5n F R L 5Ω C L 35pF witch Output t ON t OFF.9 x.9 x C L Includes Fixture and tray Capacitance Logic input waveform are inverted for switches with opposite logic sense Figure 1. Turn-On/Turn-Off Timing V B B B 1 Control Input V 5% t R = t = 2.5n F R L 5Ω C L 35pF.9 x V OUT C L Includes Fixture and tray Capacitance t D Figure 2. Break-Before-Make Timing B V IN 5Ω 5Ω Network nalyzer ource ignal B B 1 V IN 5Ω Network nalyzer ource ignal 5Ω or V + 5Ω or V + 5Ω Figure 3. Off Isolation Figure 4. Crosstalk Rev. 1. February Page 7 of 1
8 C Loading and Waveforms (continued) V GEN R GEN Input Control B or B 1 C L IN OFF ON Δ OFF IN OFF ON Q = (Δ )(C L ) OFF Figure 5. Charge Injection 1nF Network nalyzer Capacitance Meter f = 1MHz B or B1 V or 5Ω ource ignal 5Ω + BN Figure 6. ON/Off Capacitance Measurement Figure 7. Bandwidth udio nalyzer 6Ω BN ource ignal 6Ω + 32Ω C L C L Includes Fixture and tray Capacitance Figure 8. Harmonic Distortion Rev. 1. February Page 8 of 1
9 Package Dimensions, QFN 1.8 mm x 2.6 mm, 16L D Pin 1 Reference 15x L X 2X.15 C.15 C TOP VIEW E B L x b BOTTOM VIEW e.1 C B.5 C NOTE 3.1 C.8 C IDE VIEW 1 3 C ETING PLNE RECOMMENDED LND PTTERN Dimensions in millimeters ymbols 1 3 b D E e L L1 Min. Min REF BC 2.6 BC.4 BC ymbols 1 3 b D E e L L1 Dimensions in inches Min. Min REF BC.12 BC.16 BC UNIT: mm Notes: 1. Dimensioning and tolerancing per ME Y14.5m, Controlling dimension is millimeter, converted inch dimensions are not necessarily exact. 3. Dimension b applies to plated terminal and is measured between.25 mm and.3 mm from terminal. 4. Coplanarity applies to the exposed pad as well as the terminals. 5. Exposed pads connected to die flag. Used as test contacts. Rev. 1. February Page 9 of 1
10 Part Marking OZ6275QI (QFN-16) Product Number Code R 19 ssembly Lot Code and ssembly Location Code Week Code and Year Code This datasheet contains preliminary data; supplementary data may be published at a later date. lpha & Omega emiconductor reserves the right to make changes at any time without notice. LIFE UPPORT POLICY LPH & OMEG EMICONDUCTOR PRODUCT RE NOT UTHORIZED FOR UE CRITICL COMPONENT IN LIFE UPPORT DEVICE OR YTEM. s used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Rev. 1. February Page 1 of 1
AOZ Ω Low-Voltage Dual-SPDT Analog Switch. General Description. Features. Applications
OZ6233 0.35Ω Low-Voltage Dual-PDT nalog witch General Description The OZ6233 is a 0.35Ω low-voltage Dual ingle Pole Double Throw (PDT) analog switch. The OZ6233 operates from a single 1.65V to 3.6V supply.
More informationFSA Ω Low-Voltage SPDT Analog Switch
F5157 0.4Ω Low-Voltage PDT nalog witch Features Typical 0.4Ω On Resistance (R ON ) for +2.7V upply F5157 Features Less than 12μ I CCT Current When Input is Lower than 0.25Ω Maximum R ON Flatness for +2.7V
More informationFSA2257 Low R ON Low-Voltage Dual SPDT Bi-Directional Analog Switch
F2257 Low R ON Low-Voltage Dual PDT Bi-Directional nalog witch Features Maximum 1.15Ω On Resistance (R ON ) for 4.5V upply 0.3Ω Maximum R ON Flatness for +5V upply pace-aving MicroPak Packaging Broad Operating
More informationFSA2859 Dual-Voltage, 0.8Ω DPDT Analog Switch with Power-Off Isolation
Click here for this datasheet translated into Chinese! ugust 2008 F2859 Dual-Voltage, 0.8Ω DPDT nalog witch with Power-Off Isolation Features Power-Off Isolation (=0V) 0.8Ω Maximum On Resistance (R ON)
More informationLow-Voltage, 1 Ω Dual SPST Analog Switch with Power-Off Isolation. Description
FS1259 Low-Voltage, 1 Ω Dual SPST nalog Switch with Power-Off Isolation Features Power-Off Isolation (V CC =0 V) 1 Ω On Resistance (R ON ) for 4.5V V CC 0.25 Ω Maximum R ON Flatness for 4.5 V V CC Space-Saving,
More informationFSA1259 / FSA1259A Low-Voltage, 1Ω Dual SPST Analog Switch with Power-Off Isolation
FS1259 / FS1259 Low-Voltage, 1Ω Dual SPST nalog Switch with Power-Off Isolation Features Power-Off Isolation (=0V) 1Ω On Resistance (R ON) for 4.5V 0.25Ω Maximum R ON Flatness for 4.5V Space-Saving, US8
More informationFSA Ω Low-Voltage Dual DPDT Analog Switch
March 2013 FSA2467 0.4Ω Low-Voltage Dual DPDT Analog Switch Features Typical 0.4 On Resistance (R ON ) for +2.7V Supply Features Less then12µa ICCT Current when Sn Input is Lower than V CC 0.25 Maximum
More informationPI5A3167C Low Voltage SPST 0.8Ω Analog Switch
Features Description CMO Technology for us and nalog pplications Low On-Resistance: 0.8Ω at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail ignal Range Control Input Overvoltage Tolerance: 5.5V Fast Transition
More informationNC7SB3157, FSA3157 Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch
NC7B3157, F3157 Low-oltage PDT nalog witch or 2:1Multiplexer / De-multiplexer Bus witch Features Useful in Both nalog and Digital pplications pace-aving, C7 6-Lead urface Mount Package Ultra-mall, MicroPak
More informationFSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation
December 2013 FSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation Features Low I CC When the S Input is Lower Than V CC Power-Off Isolation (V CC=0 V) 1 Ω On Resistance (R ON) for 4.5 V
More informationDual DPDT Ultra-Low R ON
General Description Dual DPDT Ultra-Low R ON Analog Switch UM3699A UM3699A QFN16 3.0 3.0 The UM3699A are dual independent ultra low R ON DPDT analog switches. These devices are designed for low operating
More informationIs Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
More informationWAS4729QB QB* WAS4729QB. Descriptions. Features. Applications. Order information
WAS4729QB Low On Resistance (0.75Ω) Dual SPDT Analog Switch with Negative Swing Audio Capability Http//:www.sh-willsemi.com Descriptions The WAS4729QB is a high performance, dual Single Pole Double Throw
More informationAOZ8211 One-line TVS Diode
One-line TVS Diode General Description The OZ8211 is a one-line transient voltage suppressor diode designed to protect voltage sensitive electronics from high transient conditions and SD. This device incorporates
More informationFSAT66 Low Voltage Single SPST Normally Open Analog Switch with TTL Compatible Control Input
April 2003 Revised July 2004 FSAT66 Low Voltage Single SPST Normally Open Analog Switch with TTL Compatible Control Input General Description The FSAT66 is a high speed single pole/single throw normally
More informationFeatures. Applications
PRELIMINARY DATASHEET IDTHS421V16 Description The IDTHS421V16 is a bi-directional, low power, Quad single-pole, double-throw (SPDT) hybrid switch targeted at dual SIM card multiplexing. It is optimized
More informationWAS4723Q WAS4723Q. Order information 1 2 VCC NO1. Low On Resistance, Dual SPDT Analog Switch. Http//: QFN L
WAS4723Q Low On Resistance, Dual SPDT Analog Switch Http//:www.willsemi.com Descriptions The WAS4723Q is a high performance, dual Single Pole Double Throw (SPDT) analog switch that features ultra-low Ron
More informationWAS4899Q WAS4899Q. Descriptions. Features. Order information. Applications. Low On Resistance, Quad SPDT Analog Switch. Http//:
WAS4899Q Low On Resistance, Quad SPDT Analog Switch Http//:www.willsemi.com Descriptions The WAS4899Q is a high performance, quad, Single Pole Double Throw (SPDT) analog switch that features ultra-low
More informationUM Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN General Description. Applications
0.5Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN10 1.8 1.4 General Description The UM5223 is a low on-resistance (R ON ), dual single-pole/double-throw (SPDT) analog switch operates from
More informationPI5A23159 Low Voltage Dual SPDT 0.8Ω Analog Switch
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.8 at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Overvoltage Tolerance: 5.5V(Min) Fast Transition Speed:
More informationMP2735/MP2736 Low-Voltage 0.45Ω Dual SPDT Analog Switches
The Future of Analog IC Technology GENERAL DESCRIPTION The MP2735/MP2736 are low voltage, low onresistance, dual single-pole, double-throw (SPDT) monolithic CMOS analog switches designed for high performance
More information0.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch
.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION The DG2523 and DG2524 are four-channel single-pole double-throw (SPDT) analog switches. The DG2523 has two control inputs
More information0.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch
.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch DESCRIPTION The is a compact, low resistance, ultra-low distortion double pole double throw (DPST) analog switch. The features a flat.39
More informationTOP VIEW COUT1 COM2. Maxim Integrated Products 1
19-77; Rev ; 7/4.75Ω, Dual SPDT Audio Switch with General Description The dual, single-pole/double-throw (SPDT) switch operates from a single +2V to +5.5V supply and features rail-to-rail signal handling.
More informationPI5A4684. Chip Scale Packaging, Dual SPDT Analog Switch. Features. Description. Pin Configuration/ Block Diagram (top view) CSP.
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.5Ω. Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5V min. High Off Isolation:
More informationDG1411E, DG1412E, DG1413E. 1.5 On Resistance, ± 15 V / +12 V / ± 5 V, Quad SPST Switches. Vishay Siliconix.
1.5 On Resistance, ± 15 / +12 / ± 5, Quad SPST Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
More informationPrecision Monolithic Quad SPST CMOS Analog Switches
Precision Monolithic Quad SPST CMOS Analog Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
More informationObsolete Product(s) - Obsolete Product(s) Obsolete Product(s) - Obsolete Product(s) STG3684
LOW VOLTAGE 0.5Ω MAX DUAL SPDT SWITCH WITH BREAK BEFORE MAKE FEATURE HIGH SPEED: t PD = 0.3ns (TYP.) at V CC = 3.0V t PD = 0.4ns (TYP.) at V CC = 2.3V ULTRA LOW POWER DISSIPATION: I CC = 0.2µA (MAX.) at
More informationWAS4732D WAS4732D. Descriptions. Features. Order information. Applications. MIC/GND Cross-point Switch for EU/US Headphone Compatible Application
/ Cross-point Switch for EU/US Headphone Compatible Application http://www.sh-willsemi.com Descriptions The is a 2x2 cross-point switch that is used to interchange the Ground and connections on a headphone
More information3.9, 8-Channel / Dual 4-Channel, ± 15 V, +12 V, ± 5 V Precision Multiplexers
DG148E, DG149E 3.9, 8-Channel / Dual 4-Channel, ± 15, +12, ± 5 Precision Multiplexers DESCRIPTION The DG148E is a precision analog multiplexer comprising eight single-ended channels. The DG149E is a dual
More informationSGM7228 Low Cost, High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7228 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7228 is designed for the switching of high-speed
More informationFEATURES BENEFITS APPLICATIONS. PARAMETER LIMIT UNIT Reference to GND V to +6 IN, COM, NC, NO a -0.3 to (V )
DESCRIPTION www.vishay.com.5, High Bandwidth, Dual SPDT Analog Switch The DGE is a low-voltage dual single-pole / double-throw monolithic CMOS analog switch. Designed to operate from. V to 5.5 V power
More informationAutomotive 125 C Analog Switch Dual DPDT / Quad SPDT, 0.37, 338 MHz Bandwidth
Automotive 125 C Analog Switch Dual DPDT / Quad SPDT, 0.37, 338 MHz Bandwidth DESCRIPTION The, is a four-channel single-pole double-throw (SPDT) analog switch with two control inputs. It is also known
More informationDG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS
High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch DESCRIPTION The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a.6
More informationMAX4740ETE+ MAX4740EVE+ MAX4740HETE+ MAX4740HEVE+ TOP VIEW INTERNAL SPEAKER EXTERNAL HEADPHONES COM4 EXTERNAL HEADPHONES
19-558; Rev 1; 11/7 Quad SPDT Audio Switches General Description The low on-resistance (.61Ω typ) analog switches operate from a single 1.6V to 5.5V supply. The are quad, singlepole, double-throw (SPDT)
More informationSTG3699AQTR LOW VOLTAGE 0.5Ω MAX QUAD SPDT SWITCH WITH BREAK-BEFORE-MAKE FEATURE
LOW VOLTAGE 0.5Ω MAX QUAD SPDT SWITCH WITH BREAK-BEFORE-MAKE FEATURE HIGH SPEED: t PD = 1.5ns (TYP.) at V CC = 3.0V t PD = 1.5ns (TYP.) at V CC = 2.3V ULTRA LOW POWER DISSIPATION: I CC = 0.2µA (MAX.) at
More informationTOP VIEW COM2. Maxim Integrated Products 1
19-3472; Rev ; 1/4 Quad SPST Switches General Description The quad single-pole/single-throw (SPST) switch operates from a single +2V to +5.5V supply and can handle signals greater than the supply rail.
More informationSGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7222 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7222 is designed for the switching of high-speed
More informationNLAS3699B. Dual DPDT Ultra Low R ON Switch
Dual DPDT Ultra Low R ON Switch The NLAS3699B is a dual independent ultra low R ON DPDT analog switch. This device is designed for low operating voltage, high current switching of speaker output for cell
More informationDual SPDT Analog Switch
Dual SPDT Analog Switch DESCRIPTION The DG9236 is a CMOS, dual SPDT analog switch designed to operate from = 2.7 V to = 6 V max. operating, single supply. All control logic inputs have a guaranteed.8 V
More informationAOZ1321DI. Load Switch with Controlled Slew Rate AOZ1321DI. Features. General Description. Applications. Typical Application
Load Switch with Controlled Slew Rate General Description The AOZ1321DI is a P-channel high-side load switch with controlled slew rate. Three slew rate options are available. The AOZ1321DI-1L and AOZ1321DI-4L
More informationAOZ8231A. One-line Bi-directional TVS Diode. General Description. Features. Applications
One-line Bi-directional TVS Diode General Description The OZ8231 is a one-line bi-directional transient voltage suppressor diode designed to protect voltage sensitive electronics from high transient conditions
More informationAS11P2TLR. Low voltage 1 Ω single-pole double-throw analog switch with breakbefore-make. Description. Features
Low voltage 1 Ω single-pole double-throw analog switch with breakbefore-make feature Description Datasheet - production data Features DFN6L High speed: t PD = 130 ps (typ.) at V CC = 3.0 V t PD = 140 ps
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationPrecision Monolithic Quad SPST CMOS Analog Switches
Precision Monolithic Quad SPST CMOS Analog Switches DESCRIPTION The DG4 series of monolithic quad analog switches was designed to provide high speed, low error switching of precision analog signals. Combining
More informationLow Voltage, Dual SPDT Analog Switch with Charge Pump
Low Voltage, Dual SPDT Analog Switch with Charge Pump DG, DG, DG DESCRIPTION The DG, DG, DG are monolithic CMOS analog switching products designed for high performance switching of analog signals. Combining
More informationNLAS6234. Audio DPDT Switch with Noise Suppression
Audio DPDT Switch with Noise Suppression Description The NLAS6234 is a DPDT switch featuring Popless noise suppression circuitry designed to prevent pass through of undesirable transient signals known
More informationBCT4222B BCT4222B. High-Speed DPDT Analog Switch. General Description. Features. Connection Diagram. Applications
BCT4222B Features V CC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.05 (TYP) ON-Resistance Flatness: 0.08 (TYP) High Off Isolation: 57dB at 10MHz 54dB (10MHz) Crosstalk
More informationFSUSB45 Hi-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect
December 2009 FSUSB45 Hi-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect Features Low On Capacitance: 7.0pF Typical Low On Resistance: 3.9Ω Typical Low Power Consumption: 1μA Maximum -
More informationLow-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability
Low-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability DG6, DG63 DESCRIPTION The DG6, DG63 is a low on-resistance, single-pole/ double-throw monolithic CMOS analog switch with negative
More informationFSUSB43 Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) Switch
FSUSB43 Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) Switch Features Over-Voltage Tolerance (OVT) on all USB Ports up to 5.25V without External Components Low On Capacitance: 3.7pF Typical Low On
More informationBCT4222B 350MHz DPDT Analog Switch
BCT4222B 350MHz DPDT Analog Switch Features VCC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.04 Ω (TYP) ON-Resistance Flatness: 0.08Ω (TYP) High Off Isolation: 58dB at
More informationFSUSB30 Low-Power, Two-Port, High-Speed USB 2.0 (480Mbps) Switch
Click to see this datasheet in Simplified Chinese! FSUSB30 Low-Power, Two-Port, High-Speed USB 2.0 (480Mbps) Switch Features Low On Capacitance: 3.7pF (Typical) Low On Resistance: 6.5Ω (Typical) Low Power
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More information0.45, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability
5, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability DESCRIPTION The is a dual SPDT low on-resistance switch designed to from a single 1.6 V to 5.5 V power supply. It is a bi-directional
More informationNLAS4783B. Triple SPDT 1.0 R ON Switch
Triple SPDT 1.0 R ON Switch The NLAS4783B is a triple independent low R ON SPDT analog switch with ENABLE. This device is designed for low operating voltage, high current switching of speaker output for
More informationPower-off Isolation, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Power-off Isolation,,. V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for. V to 5.5 V operation with a single
More informationSGM Ω, Low Voltage Quad, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power
More informationLow-Voltage, Dual SPDT, Audio Clickless Switches With Negative Rail Capability
19-563; Rev ; 5/6 Low-Voltage, Dual SPDT, Audio Clickless General Description The dual SPDT (single pole/double throw) audio switches feature negative signal capability that allows signals as low as -
More informationDescription. Features. Applications. Pin Assignment. Pin Description Pin No Pin Name. Logic Function Table Logic Inputs(S) PI5A4157
Low Voltage SPDT 0.8Ω Analog Switch Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.8Ω at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage
More informationPower-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Power-off Protection,,. V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for. V to 5.5 V operation with a single
More information700 MHz, -3 db Bandwidth; Single SPDT Analog Switch
7 MHz, -3 db Bandwidth; Single SPDT Analog Switch DESCRIPTION is a low R ON, high bandwidth analog switch configured in single SPDT. It achieves 5 switch on resistance, greater than 7 MHz -3 db bandwidth
More information0.5 pc Charge Injection, 100 pa Leakage, Dual SPDT Analog Switch
0.5 pc Charge Injection, pa Leakage, Dual SPDT Analog Switch DESCRIPTION The is an analog CMOS, dual SPDT switch, designed to operate from a +2.7 V to +12 V single supply or from ± 2.7 V to ± 5 V, dual
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44599 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationFSUSB45 High-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect
July 2013 FSUSB45 High-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect Features Low On Capacitance: 7.0 pf Typical Low On Resistance: 3.9 Ω Typical Low Power Consumption: 1 μa Maximum
More informationMultiplexers/Switches
EVALUATION KIT AVAILABLE / General Description The / are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer () and a double-pole/double-throw (DPDT) switch
More informationSTG3693. Low voltage high bandwidth quad SPDT switch. Features. Description
Low voltage high bandwidth quad SPDT switch Datasheet - production data Features Ultra low power dissipation: I CC = 0.3 µa at T A = 125 C Low on-resistance: R DS(on) = 4 Ω (T A = 25 C) at V CC = 3.0 V
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4461 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection
New Product DG/DG1 Sub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection DESCRIPTION The DG/DG1 are low-voltage single single-pole/ double-throw monolithic CMOS analog switches. Designed
More informationFEATURES DG2538, MSOP-10 V+ 1 V+ COM 1. Top View. Temperature Range Package Part Number
Dual SPST Switches DG, DG8, DG9 DESCRIPTION The DG, DG8, and DG9 are low voltage, precision dual SPST switches that can be operated in a single supply or in a dual supply configuration power supply with
More information0.6Ω, Low-Voltage, Single-Supply, Dual SPDT Analog Switch
.6Ω, Low-Voltage, Single-Supply, Dual SPDT General Description The is a low on-resistance, low-voltage, dual single-pole/double throw (SPDT) analog switch that operates from a single 1.6V to 4.2V supply.
More informationFSA3031 Dual High-Speed USB2.0 with Mobile High-Definition Link (MHL )
FSA3031 Dual High-Speed USB2.0 with Mobile High-Definition Link (MHL ) Features Low On Capacitance: 4.6 pf/6.75 pf MHL/USB (Typical) Low Power Consumption: 30 μa Maximum Supports MHL Rev. 2.0 Passes 1080
More informationDEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO TITLE MICROCIRCUIT, DIGITAL-LINEAR, 1 OHM, SPDT ANALOG SWITCH, MONOLITHIC SILICON REVISIONS
REVISIONS LTR DESCRIPTION DTE PPROVED Update document paragraphs to current requirements. - ro 14-06-25 C. SFFLE CURRENT DESIGN CTIVITY CGE CODE HS CHNGED NMES TO: DL LND ND MRITIME 43218-3990 Prepared
More informationSGM3717 4Ω, 400MHz Bandwidth, Dual, SPDT Negative Signal Handling Analog Switch
Preliminary datasheet SGM3717 GENERAL DESCRIPTION The SGM3717 is a dual, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switch designed to operate from a single +2.5V to +5.0V supply. It features
More informationMAX4684/MAX4685 OFF ON 1 SWITCHES SHOWN FOR LOGIC "0" INPUT
19-1977; Rev 4; 1/9.5Ω/.8Ω Low-Voltage, Dual SPDT General Description The low on-resistance (R ON ), lowvoltage, dual single-pole/double-throw (SPDT) analog switches operate from a single +1.8V to +5.5V
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationFeatures. Applications
DATASHEET IDTHS221P10 Description The IDTHS221P10 is a high-performance hybrid switch device, combined with hybrid low distortion audio and USB 2.0 high speed data (480 Mbps) signal switches, and analog
More informationFSA321 USB2.0 Hi-Speed (480Mbps) and Audio Switches with Negative Signal Capability and Built-in Termination on Unselected Audio Paths
March 2013 FSA321 USB2.0 Hi-Speed (480Mbps) and Audio Switches with Negative Signal Capability and Built-in Termination on Unselected Audio Paths Features Audio: 1.8 Typical On Resistance HS-USB: 8 Typical
More informationNLAS5157. Ultra-Low 0.4 SPDT Analog Switch
Ultra-Low.4 SPDT Analog Switch The NLAS5157 is Single Pole Double Throw (SPDT) switch designed for audio systems in portable applications. The NLAS5157 features Ultra Low R ON of.4 typical at = V and.15
More informationFSA2268 / FSA2268T Low-Voltage Dual-SPDT (0.4 ) Analog Switch with 16kV ESD
FSA2268 / FSA2268T Low-Voltage Dual-SPDT (0.4 ) Analog Switch with 16kV ESD Features 0.4Ω Typical On Resistance (R ON) for +3.0V Supply 0.25Ω Maximum R ON Flatness for +3.0V Supply -3db Bandwidth: > 50MHz
More informationLow-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
19-563; Rev 1; 11/6 Low-Voltage, Dual SPDT, Audio Clickless General Description The MAX4744/MAX4744H/MAX4745/MAX4745H/ dual SPDT (single-pole/double-throw) audio switches feature negative signal capability
More informationSGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.
More information0.4 Ω CMOS, Dual DPDT Switch in WLCSP/LFCSP/TSSOP ADG888
FEATURES.8 V to 5.5 V operation Ultralow on resistance.4 Ω typical.6 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion.7 Ω typical.4 Ω maximum RON flatness High current carrying
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4462 is a dual, high-speed, low-voltage, double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single 1.8V to 5.5V power supply. It features high-bandwidth
More informationWAS4799Q WAS4799Q. Order information. Low On Resistance, Quad SPDT Analog Switch. Http//:
WAS4799Q Low On Resistance, Quad SPDT Analog Switch Descriptions The WAS4799Q is a high performance, quad, Single Pole Double Throw (SPDT) analog switch that features ultra-low Ron of 0.5 Ω (typical) at
More information2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch
2 Port, UB 2. High peed (48 Mbps) witch, DPDT Analog witch DG273 DECRIPTION The DG273 is 2 port high speed analog switch optimized for UB 2. signal switching. The DG273 switch is configured in DPDT. It
More informationFSAV MHz 4 Channel 2:1 Video Switch
800MHz 4 Channel 2:1 Video Switch General Description The FSAV450 is a high performance Quad SPDT (2-to-1 multiplexer/demultiplexer) video switch designed specifically for switching high definition YPbPr
More informationMAX4852 MAX4852H NC1 COM1 NO1 IN1 IN2 NC2 COM2 NO2. Maxim Integrated Products 1
19-7; Rev ; 7/ Dual SPDT Analog Switches with General Description The family of dual SPDT (single-pole/double-throw) switches operate from a single +V to +.V supply and can handle signals greater than
More information0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches
19-116; Rev ; 1/6.Ω, Low-Voltage, Single-Supply Dual SPST General Description The are low on-resistance, low-voltage, dual single-pole/single-throw (SPST) analog switches that operate from a single +1.6V
More informationFSA2457 Dual DPDT, 5Ω Analog Data Switch
FSA2457 Dual DPDT, 5Ω Analog Data Switch Features Low On Capacitance for Data Path: 12pF Typical Low On Resistance for Data Path: 5Ω Typical Low Pow er Quiescent Consumption: 1μA Maximum Wide -3db Bandw
More information0.8Ω, Low-Voltage, 4-Channel Analog Multiplexer
General Description The is a low on-resistance, low-voltage, 4-channel CMOS analog multiplexer that operates from a single 1.6V to 3.6V supply. This device has fast switching speeds (t ON = 25ns, t OFF
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG9411 DESCRIPTION The DG9411 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low
More information2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch
2 Port, UB 2. High peed (48 Mbps) witch, DPDT Analog witch DG272 DECRIPTION The DG272 is 2 Port high speed analog switch optimized for UB 2. signal switching. The DG272 switch is configured in DPDT. It
More informationHigh Speed, Low Voltage, Dual, DPDT Analog Switch
High Speed, Low Voltage, Dual, DPDT Analog Switch General Description UM QFN16 3.0 3.0 UMA QFN16 2.6 1.8 The UM/A is a high speed, dual, dual-pole/double-throw (DPDT) analog switch operates from a single
More informationFSA2269 / FSA2269TS Low-Voltage Dual-SPDT (0.4 ) Analog Switch with Negative Swing Audio Capability
July 2013 FSA2269 / FSA2269TS Low-Voltage Dual-SPDT (0.4 ) Analog Switch with Negative Swing Audio Capability Features 0.4 Ω Typical On Resistance (R ON) for +3.0 V Supply 0.25 Ω Maximum RON Flatness for
More informationLow-Voltage Single-Supply, SPDT Analog Switch in SC-70
Low-oltage Single-Supply, SPDT Analog Switch in SC-7 DESCRIPTION The DG499 is a cost effective upgrade to other types of 499 low-voltage, single-pole/double-throw analog switches available in the industry
More informationCMOS ±5 V/+5 V, 4 Ω Dual SPST Switches ADG621/ADG622/ADG623
CMO ±5 V/+5 V, 4 Ω ual PT witches AG62/AG622/AG623 FEATURE 5.5 Ω (maximum) on resistance.9 Ω (maximum) on resistance flatness 2.7 V to 5.5 V single supply ±2.7 V to ±5.5 V dual supply Rail-to-rail operation
More information20Ω, 300MHz Bandwidth, Dual SPDT Analog Switch in UCSP
9-2626; Rev ; /2 2, 3MHz Bandwidth, Dual SPDT Analog General Description The low-voltage, low on-resistance (R ON ), dual single-pole/double throw (SPDT) analog switch operates from a single +.8V to +5.5V
More informationRC4207. Precision Monolithic Dual Operational Amplifier. Features. Description. Block Diagram. Pin Assignments.
www.fairchildsemi.com RC7 Precision Monolithic Dual Operational Amplifier Features Low Noise.5 mvp-p (. Hz to Hz) Ultra-low VO 75 mv Ultra-low VO drift. mv/ C Long term VO stability. mv/mo Low input bias
More informationSGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3003 is a single, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single +1.8V to +5.5V supply. Targeted
More information