Volume 1 October, 2017
|
|
- Allison Shaw
- 5 years ago
- Views:
Transcription
1 Volume 1 October, 2017 Dave Rife
2 Next regular meeting, Saturday November 11, 2017 at the Traverse Bay Area Intermediate School District at 880 Parsons Road, Traverse City, MI. Rolls Chuck Vernon Coffee Chuck Vernon Bring Back Tom Lufkin. Demonstration Chuck Vernon NW Michigan Woodturner Meeting October 14, 2017 The business meeting was convened at 09:00 by President Lyle Jamieson at the TBA Career-Tech Center. 29 members and guests were in attendance. Our guests today were: Mitch Rock Traverse City Ken Hunter Suttons Bay Jeff Sanborn Lake Leelanau Announcements: New construction at the TBA Career-Tech Center is underway, and for the forseeable future, we will not be able to use our normal parking area and entry door. We will need to park in the west parking lot and enter the building at door 2. Door 2 is located as you normally turn left after coming in the tech center driveway. Enter door 2 and walk straight down the hallway and turn left at the first hallway. Dan Buron of Goodwill, Northern Michigan, was at our meeting to tell us a bit more about the Empty Bowls Program and Food Rescue. This is an important program, as it helps fund Food Rescue, which provides needed food resources to food pantries in our 5-county area. Dan was here to pick up bowls we are donating to the Empty Bowls event on November 5th. The program has been so impressed by the number and quality of the bowls we have donated that Dan has extended a complimentary invitation to this year's event at the Hagerty Center in Traverse City. If you would like to attend, please contact Dan Buron at Goodwill immediately at , or on his cell at If you still have bowls to donate to the program, please contact Chuck Vernon, our Empty Bowls Coordinator at ( hockeyref542@hotmail.com), or take the bowl(s) to the Goodwill business office (adjacent to the store) on South Airport Road, Traverse City. Old Business: We discussed the September demonstration and handson learning opportunity with Mark Gardner. The demonstration was well attended, and comments indicated that it was very well received. The handson opportunities at Lyle's studio, while necessarily limited in number,
3 were also well commented on, and attendees both enjoyed the experience and learned new techniques. The cost of the three-day event was $2,709, and participant registrations covered $1,520. The club treasury covered the rest. Library display: 22 of our members arrived at the Traverse City Public Library on October 2nd to fill two display cabinets with over 110 fantastic examples of local wood turning. Thank you to all who contributed. There have been many wonderful comments about the display to date. Thank you Owen and Gail for coordinating this for the club. Our work will remain on display through the end of October. We need to take the display down ON October 31. We 22 members will meet there again at 9:30 am on that Tuesday to retrieve our work. Please, if you cannot be there for the retrieval, contact Owen Toomey at (home), (Gail's cell phone), or Kris Roberts at (cell), (house). One way or another, we will get your pieces back to you. New Business: Christmas in October Party: As this newsletter is coming out after the fact, I will have to say that the Christmas in October Party on Sunday, October 22, was a great success. Nearly 50 turners, spouses, family and friends attended. Owen and Gail Toomey again hosted a fantastic party with food, drink, and desserts. The gift exchange to our other halves brought many oos and aahs. Like our Library dsiplay, the gifts showed just how talented our members are. Unfortunately, your secretary forgot to bring a camera, and Owen's camera battery was nearly exhausted, so there aren't any pictures of the gifts. TBA Career-Tech Center turning education opportunity: The Career- Tech Center has, in exchange for rent, asked our club to provide the opportunity for interested students to learn about turning by hands-on experience. Chuck Vernon volunteered to coordinate and arrange member teachers, and be the liaison between the club and the school. Members interested are requested to Contact Chuck (see his contact info above) to schedule times and dates to work with students one on one. This will continue through the school year, so we need members to volunteer their time as able to pass our craft on to a new generation. Members who have done this in the past say it is a very rewarding experience. You don't need to be a master turner to do this. Students just need the basics and guidance for a first project September Demonstrator: The club was asked it we want to bring in a demonstrator/teacher again in By show of hands, a high majority present said we want to do it again.
4 Kris Roberts and Robin Fraser volunteered to research and suggest names of outside demonstrators to the Board for consideration. If you know of someone who would be a good demonstrator, or if you have a particular desire for a demonstration topic, please let Kris or Robin know. We know from experience that we need to act swiftly to get someone scheduled for next year, as demonstrators schedules fill up very early. Christmas Ornament Challenge: Gary Perkins suggested, and is organizing a club Christmas Ornament Challenge. He suggests a $5.00 entry, which will result in cash prizes for top judged entries by club vote. He will have more information and entry forms ready for the November meeting. 10 Turners 10 Bowls Challenge: At the Christmas in October party, Owen issued the following challenge: 10 members to turn 10 bowls in the next 12 months to be donated to the Empty Bowls 2018 event. Owen will talk about this further and get commitments in the November meeting. Please think about it guys. This is a great way to benefit our community with our passion for woodturning. Tech Talk: One of our members asked how to best mount up a blank on a glue block so that it is best centered for turning. Lyle and others offered this advice: 1) Initially mount the blank between center with the best balance possible. 2) True up the blank and adjust so it gives the best presentation of grain and features while it is still between centers. 3) Begin forming the outside profile, but only enough so you can see that you have the orientation you want. 4) Mount the blank on the glue block, approximately centered. It is impossible to get it exact, and have your blank running perfectly true. This is why you only turn the approximate profile before bringing in the glue block. 5) Now true up the blank and refine your profile, and continue. Future Meetings: For November, John Sheets will chair, as Lyle will be away. Chuck Vernon will demonstrate an inside-out turning project December Lyle Jamieson will demonstrate the turning of a thinwalled goblet January Chuck Vernon will demonstrate turning and attaching a stem and base to a wine glass February Robin Fraser will demonstrate Simple Things for Giveaway
5 Show and Share: Dave Rife Lidded boxes from scraps, and a chestnut burl bowl
6 John Sheets His maple hollow vase form finished from the Mark Gardner hands-on class Tevin Miles Magic wands of mahogany and copper and ipe Bob Menz Cherry bowl with undercut rim
7 Norm Dill Lidded box of Ash with gilders wax, hollow form urn of ash, and maple hollow form with paint embellishment
8 Chuck McLaughlin His maple hollow form vase with handles from the Mark Gardner hands-on class, and a maple burl bowl with danish oil finish Bill Schlink Large big leaf maple bowl with crack filling of West System epoxy, walnut dust and metal shavings (The Bring Back Raffle Prize)
9 Bring Back Raffle: These are sought after by a local gallery, so Dave is trying to develop a technique for making boxes in a time efficient process. His goal is to be able to turn 3 lidded boxes in an hour, using a concentric chuck mounting. Bill Schlink's large bowl, won by Tom Lufkin Club Demonstration: Dave Rife Production turning of lidded boxes Dave likes to turn small lidded boxes of collected wood scraps from turning projects and other sources he finds. He begins, after mounting his blank in a chuck, by setting his tool rest height so that the cutting edge of his gouge is at the axis of rotation. After roughing the square block to a cylinder, Dave uses planing cuts with the bowl gouge to refine the shape of the body. He anchors the tool with his body, and uses his body to move the tool, not his hands. This gives a smoother, more consistent line of cut.
10 After the body diameter is set and the outside profile is finished, Dave chooses two sizes of forstner bit to hollow. This first, largest size is used to cut the mortice, as Dave s design has the lid sitting down into this mortice. Hence the forstner bit size is the same diameter as the box lid he will use. This diameter has already been set by turning a cylinder of wood for the lid, which will be then parted off as a thin disc. The second forstner bit size is the smaller diameter, chosen to give the desired wall thickness of the box. This is the major hollowing process for the box. When the box depth is achieved, Dave uses a square end scraper to remove the center negative dimple left by the forstner bit, and sands. The lid disc is then parted and sawed off from the lid cylinder and fitted tight into the mortice (the body is used now as a jam chuck) so the lid can be finished and a finial or knob attached. It is then sanded and waxed for a looser fit in the box.
11 Thank You The body is then reversed onto a jam chuck and the bottom of the box cleaned and finished. Those who furnished turned items for the display table I say thank you, the items are beautiful You are a true group of craftsmen Thank You Kris Roberts for a great job of taking photos and notes for the Northwestern Michigan Woodturners news letter. As Dave, and others have found out, the goal he set out for the demo didn't get as far as he thought. Only one box was finished in the demonstration period, but it was finished well. With practice and less explaining of steps to club members, the number of boxes he will turn in a given time will increase. As in anything, developing the technique takes time. With repetition, speed increases. Good luck Dave. A very good demonstration. Respectfully submitted, Kris Roberts, Secretary Remember Empty Bowls November 5 th at the Hagerty Center Traverse City, MI Reminder Please be at the Traverse District Library on October 31 st at 9:30 A.M. to pick up your displayed items
Volume 1 July, John Sheets
Volume 1 July, 2017 John Sheets NW Michigan Woodturners Regular Meeting, July 8, 2017 Next regular meeting, Saturday August 12, 2017 at the Traverse Bay Area Intermediate School District at 880 Parsons
More informationBetween Turns. May Stump The Pro... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Michigan Association of Woodturners A chapter of the American Association of Woodturners Tom Mogford 810-629-6176 Vice President: V O L U M E 2 2, I S S U E
More informationMinutes/Newsletter of Space Coast Woodturners January 14, 2015
Minutes/Newsletter of Space Coast Woodturners January 14, 2015 Submitted by Dotty Pugh Secretary Just a reminder the meetings are held on the second Wednesday of the month from 7:00 9:00 PM and the handson
More informationMinutes/Newsletter of Space Coast Woodturners April 8, 2015
Minutes/Newsletter of Space Coast Woodturners April 8, 2015 Submitted by Dotty Pugh Secretary Just a reminder the meetings are held on the second Wednesday of the month from 7:00 9:00 PM and the handson
More informationGoblet. Two-Part. About a year ago, we were invited. Toast your woodturning skills By Bob Rosand
Two-Part Goblet Toast your woodturning skills By Bob Rosand About a year ago, we were invited to attend the bat mitzvah of a friend s daughter. Unfortunately, we were unable to attend because of prior
More informationCape Cod Woodturners Minutes and News May 6, 2015
Cape Cod Woodturners Minutes and News May 6, 2015 The May meeting started at 6:40 following a pre-meeting hands-on demo by Jim Silva and tool sharpening tutoring by Mike Grady. President Clarke Buchanan
More informationMarch 2, 2018 Demo. Nick Agar. Turning a Lidded Bowl with Finial. Join us at the Bemis School of Art
March 2018 March 2, 2018 Demo Nick Agar Turning a Lidded Bowl with Finial Join us at the Bemis School of Art PPW dues are $30/year. Dues are used for guest demonstrators, purchase and maintain club equipment,
More informationBetween Turns. August Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Tom Mogford 810-629-6176 Vice President: Bill Magee 734-981-6117 Michigan Association of Woodturners A chapter of the American Association of Woodturners V
More informationBetween Turns. July Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Michigan Association of Woodturners A chapter of the American Association of Woodturners Tom Mogford 810-629-6176 Vice President: V O L U M E 2 3, I S S U E
More informationTwo-Piece Hollow Form Turning Hollowing Without the Hassle
Two-Piece Hollow Form Turning Hollowing Without the Hassle Finger Lakes Woodturners January 17, 2013 1 Hollow Turning Usually turning a closed or semi-closed form through a small opening Can be done using
More informationDemonstration Bob Rosand October 20, 2007 by Bob Gunther
Demonstration Bob Rosand October 20, 2007 by Bob Gunther Overview: Bob Rosand has been a woodturner for more than 25 years. He teaches, demonstrates and writes articles on many topics pertaining to woodturning.
More informationCape Cod Woodturners Minutes and News October 7, 2015
Cape Cod Woodturners Minutes and News October 7, 2015 Vice president Jim Silva welcomed 23 members and guests to the meeting. End grain sealer, sandpaper, and CA glue is available from the club for purchase.
More informationSouth Central Pennsylvania Wood Turners Club
South Central Pennsylvania Wood Turners Club 18 Water Street, Jacobus, PA 17407 President Bill Krofft wkrofft@hotmail.com (724) 504-5565 Vice-President Tom Deneen Tomdeneen@emailaccount.com (717) 927-9004
More informationClay Foster Demonstration topics
Clay Foster Demonstration topics Rotation #1: Low-tech surface enhancement An array of surface enhancement techniques that don t require a large investment in tools, materials, or skills will be presented.
More informationChristmas Bell Ornament
Christmas Bell Ornament This is an easy Christmas ornament idea I cabbaged from a friend and skilled turner, Curt Fuller, from Utah. I kind of adapted it to my style but I still got the idea from him.
More informationNews And Views for February And March 2019
News And Views for February And March 2019 Hail Hail the gang is almost here, by rough count we had a high number of attendees at the February meeting, 48 to be exact. Well done, it gave for great participation,
More informationBetween Turns. March Burning Demonstration... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Tom Mogford 810-629-6176 Vice President: Michigan Association of Woodturners A chapter of the American Association of Woodturners V O L U M E 2 2, I S S U E
More informationVolume 13, Issue 11: November 2015
PBCW News Volume 13, Issue 11: November 2015 Next Meeting: November 14, 2015 Inside This Issue: October Demonstration PBCW WITVA Awards October 24 Minutes Collaboration Gallery Tools, Tips, Techniques
More informationMinutes/Newsletter of Space Coast Woodturners June 14, 2017
Minutes/Newsletter of Space Coast Woodturners June 14, 2017 Submitted by Randy Hardy from notes taken by Dotty Pugh (Thanks Dotty!) Just a reminder the meetings are held on the second Wednesday of the
More informationPresidents Message. Newsletter of the Treasure Coast Woodturning Guild. Hi Everyone,
An Affiliate Chapter of the American Association of Woodturners Newsletter of the Treasure Coast Woodturning Guild Hi Everyone, Presidents Message I got through my little operation without too much inconvenient
More informationO nament. Birdhouse. Birdhouse Christmas ornaments have become very
Birdhouse O nament Photo by Al Parrish Dale Nish, one of the principal architects of the turning revival, shares some turning techniques. Birdhouse Christmas ornaments have become very popular the last
More informationA Publication of the Mid Minnesota Association of Woodturners
A Publication of the Mid Minnesota Association of Woodturners Volume 7, Issue 9 September 30,2017 SHAVINGS The Mid Minnesota Association of Woodturners (MMAW) is a member based not for profit organization,
More informationBetween Turns. September Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Tom Mogford 810-629-6176 Vice President: Bill Magee 734-981-6117 Michigan Association of Woodturners A chapter of the American Association of Woodturners V
More informationCLUB MEETING NOTES Club Officers Volume 21 Issue 10. The New and Improved Long Island Woodturners Association
2011 Volume 21 Issue 10 Long Island Woodturner's Association LIWA is a chapter of the American Association of Woodturners. Our purpose is to foster a wider interest and appreciation of woodturning on Long
More informationWest Midlands Woodturners
Chairman s Comments West Midlands Woodturners Secretary: Brian Goodall Telephone: 01827 64114 email: briangoodall@gmail.com JUNE 2013 Stuart Mortimer at our June Demo Day didn t disappoint my anticipation
More informationCICAAW NEWSLETTER. Website CICAAW.org. What s Inside This Issue. Central Indiana Chapter of the American Association of Woodturners March 2018
Central Indiana Chapter of the American Association of Woodturners March 2018 CICAAW NEWSLETTER Officers President: Jim Dupler jdupler01@comcast.net Vice President: Rich Parker 765-860-7036 rddlpark@yahoo.com
More informationPeace River Woodturners
Peace River Woodturners Volume 8 Issue 9 A chapter of the American Association of Woodturners September 2015 Norm s Sample bowl for his demonstration. In This Issue Norm explaining his demonstration of
More informationJuly 19. Newsletter of the Treasure Coast Woodturning Guild June In this issue:
1 Treasure Coast Woodturners 7/10/2013 An Affiliate Chapter of the American Association of Woodturners In this issue: Newsletter of the Treasure Coast Woodturning Guild June 2013 Letter from the President
More informationTurning a Lidded Box
Turning a Lidded Box Finger Lakes Woodturners February 18, 2016 1 Turning a Lidded Box Material & Approach Can use green or dry wood, but final turning must be done dry to achieve a good fit of the lid
More informationGBWG Newsletter. March. Executive Members. Other Offices. Inside This Issue
The regular meeting was held on 16 th. The business portion included an update of insurance issues for the club, of updating the website with member photographs of their turnings, and of reminders that
More informationAlabama Woodturners Association
Alabama Woodturners Association April 2019 A member of the American Association of Woodturners Meeting location: Homewood Senior Center, 816 Oak Grove Rd., Homewood, AL 35209 Meeting time: The second Saturday
More informationA Publication of the Mid Minnesota Association of Woodturners
A Publication of the Mid Minnesota Association of Woodturners Volume 8, Issue 8 August 1, 2018 The Mid Minnesota Association of Woodturners (MMAW) is a member based not for profit organization, providing
More informationLidded box double axis
Lidded box double axis The Wood: Avoid the pith or take a chance. Select an interesting grain pattern or decorate the plain grain. Turn a cylinder with grain parallel to the axis. See the graphic below
More informationECHOES FROM THE BAT CAVE
ECHOES FROM THE BAT CAVE Bowl From a Board - Joe Kramer March 2019 Joe Kramer, from Chesapeake Woodturners was our demonstrator for March. Joe presented his techniques for creating a bowl from a board,
More informationMinutes of the May 13, 2014 meeting of the Gateway Turners Next Hands On June 7, from 12 noon until 3:00 pm
xx President: Ian H Manley... ihmserv@comcast.net Vice President: Jim Silva jim@basketryetc.com Treasurer: Phil Arcouette Sr.. philbyarc47@verizon.net Secretary: Lenny Langevin..lennysminiatures@gmail.com
More informationDid you remember the project of the month? Treasurer: Ken Lawson
Professor Paul has done it again! If you were late for class or snoozing, You missed a good session. Leroy s morning demo on Icicles and Finials was on point. He makes it look so effortless. It is easy
More informationTHE SKEWED VIEW. Our previous meeting was April 14th at Dawson s Shop. Our MAY Meeting/Picnic is at Bob Horn s (see pg 5 & 6 )
Volume 9, Issue 3 & 4 March & April 2012 BI-CITY WOODTURNERS NEWSLETTER Thar be Dragons in the Wood. At least that is what Cliff Loundsbury sees. If you joined us then you saw some too.. Awesome carvings
More informationA candle stick addresses transferring and reproducing dimensions from a plan and breaking the project into steps.
Activities Discussion These projects allow more skill development including making items to match a drawing, sizing projects to specific dimensions, and just trying fun stuff for the first time! A candle
More informationNorth Alabama Woodturners Newsletter A registered AAW chapter Edition 18-09
North Alabama Woodturners Newsletter A registered AAW chapter Edition 18-09 2 Meeting Dates: NAW meets the 4th Saturday of each month except when the meeting conflicts with a holiday or major wood turning
More informationWOODTURNERS. Providing Woodturning Education, Assistance and Experience to the Miami-Dade Community
2013 September Newsletter Vol. 26 Number 9 Workshop 8 Instant Gallery 8 Bring Back WWW.SFWTG.COM South Florida A Chapter of the American Association of Woodturners WOODTURNERS Guild Providing Woodturning
More informationTri-County Wood Turners Minutes for the January 2017 Meeting
Tri-County Wood Turners Minutes for the January 2017 Meeting The meeting opened with club president Art Worth the leading the pledge of allegiance. John Williams provided the club with a short prayer.
More informationChips & Bits. Peace River Woodturners. A chapter of the American Association of Woodturners. Meeting Announcements
Chips & Bits Peace River Woodturners Volume 6 Issue 11 A chapter of the American Association of Woodturners Contact Us President: Meeting Announcements November 2013 Avelino Samuel Jim Ellsworth: 941-505-1016
More informationBoxes & Hollow Vessels
Boxes & Hollow Vessels Course number 95744046 Mt. Diablo Adult Education A division of the Mt. Diablo Unified School District Serving Life Long Learning One Santa Barbara Road, Pleasant Hill, CA 94523
More informationCHAPTER NEWSLETTER 2014 Issue 10 PROMOTING INTEREST IN WOOD TURNING
CHAPTER NEWSLETTER 2014 Issue 10 Chapter Newsetter October 2014 PROMOTING INTEREST IN WOOD TURNING Turning a Bowl from a Log with Drue Hogland The October Demo featured a start to finish review on how
More informationNational Certificate in Woodturning
National Certificate in Woodturning The National Association of Woodworkers offers the Certificate in Woodturning as a high quality, nation-wide, woodturner training programme. This programme was developed
More informationPBCW News Volume 11, Issue 6 : June 2013
Promoting the Art And Craft Of Woodturning PBCW News Volume 11, Issue 6 : June 2013 PBCW June Meeting will be held at Mounts Botanical Garden 6/22 Minutes From The May Meeting The May meeting of the PBCW
More informationAugust 5, 2003 meeting at Woodcraft: Kirt DeHeer showed us how he does segmented turning.
Volume 5, Number 3 Utah Woodchips Newsletter September 2003, page 1 August 5, 2003 meeting at Woodcraft: Kirt DeHeer showed us how he does segmented turning. He started by showing us how he glues up the
More informationDomed Cove Box. Materials: Dry stable hardwood, straight grained with pronounced end grain, about 3+ square and 3+ long Sandpaper Finish of choice
Domed Cove Box Michael G. Stafford I don t know who first turned a box where the sides were curved in to form a waist or as we like to say in woodturning, coved. I started gradually turning boxes with
More informationThe Chip Flyer. Golden Horseshoe Woodturners Guild - Burlington, Ontario. Presidents Annual Report
150TH CHAPTER OF THE AMERICAN ASSOCIATION OF WOODTURNERS January 2008 The Chip Flyer Golden Horseshoe Woodturners Guild - Burlington, Ontario Presidents Annual Report President s Annual Report for 2007
More informationPresidentʼs Message. Tuesday, June 10 Chapter Meeting* *Note the change of meeting day and time! VOLUME 4 ISSUE 10! MAY 21, 2014
VOLUME 4 ISSUE 10! MAY 21, 2014 Presidentʼs Message Well, the weather is not cooperating at only 46 when it should be twenty degrees warmer. The plus side to the cooler weather is that the garage, which
More informationSouthwest Idaho Woodturners Association The Treasure Valley Woodturner s club Meets monthly on the 2 nd Tuesday at 6:30 PM At the Woodcraft store in Boise ID. 7005 W. Overland Rd Boise ID. http://www.swiwt.com/.
More informationYour continuing efforts to the timely returning of resources are appreciated. Regards, Dave Hawley FRW Librarian. Did You Know?
Dedicated To Doing Good Turns A CHAPTER OF THE AMERICAN ASSOCIATION OF WOODTURNERS 1992 FRONT RANGE WOODTURNERS September, 2013, Volume 13 - Number 09 Inside this Issue Inside this Issue... 1 Upcoming
More informationPresident Wayne Collins Vice President Gene Amaral. Secretary Bernie Feinerman Treasurer Bob Hopkins
A Chapter of www.oceanwoodturners.com www.woodturner.org CLUB OFFICERS President Wayne Collins Vice President Gene Amaral turner9254@aol.com amaral21@verizon.net Secretary Bernie Feinerman Treasurer Bob
More informationSLIGHTLY SKEWED. Journal of the Glendale Woodturners Guild Volume 21, Number 10 October 2012 PRESIDENT S MESSAGE. NEXT MEETING October 14, 2012
SLIGHTLY SKEWED Journal of the Glendale Woodturners Guild Volume 21, Number 10 October 2012 NEXT MEETING October 14, 2012 Sunday October 14, 2012 2:00 p.m. Sharp HOW TO FIND US SUNDAY MEETINGS Meetings
More informationBenoit Averly Demo # Eli Avisera Demo #1 Demo #2 Demo #3 Demo #4 Demo #5 Demo #6 Richard Findley Demo 1 Demo 2 Demo Demo
Benoit Averly Demo #1 Little Boxes with a French Accent How to turn little boxes using the skew a the main tool. Demo #2 Hut and Flat Boxes Turning larger hut and flat boxes. This is the next step. The
More informationStar Chapter Member of the American Association of Woodturners TURNING
Star Chapter Member of the American Association of Woodturners TURNING Hands-on Session of Space Coast Woodturners July 21, 2012 Tom Weber Demonstration - How to make a Small Clock. Submitted by Dotty
More informationKris Coyan s Steps to Make a 2-Piece Inside-Out Ornament: 1) Find (2) pieces of wood that have at least two parallel surfaces (such as pen blanks
The October demo was provided by Kris Coyan. Kris showed us how to create very nice but simple tree ornaments using the 2-piece inside-out method. The photo at left are examples of this type of ornament.
More informationPLEASE NOTE BWWT MEETINGS ARE NOW HELD ON THE SECOND SAT- URDAY OF EACH MONTH BE- GINNING AT 9:00 AM
Contains November 2011 Minutes December 2011 PLEASE NOTE BWWT MEETINGS ARE NOW HELD ON THE SECOND SAT- URDAY OF EACH MONTH BE- GINNING AT 9:00 AM BUCKEYE WOODWORKERS AND WOODTURNERS Nov. 12, 2011 The regular
More informationCentral Coast Woodturners of California. News and views for June 2018
Central Coast Woodturners of California News and views for June 2018 The month of April ended with the demonstration by John Jordan. Attendance was low as the timing conflicted with so any members participating
More information*****Note***** Contains January 2018 Minutes February, Buckeye Woodworkers & Woodturners Newsletter February 2018
Contains January 2018 Minutes February, 2018 NO MEMBERS OR VISITORS SHALL ENTER OR EXIT THE CAMP VIA THE CHRISTMAN ROAD EN- TRANCE. MEMBERS MUST ENTER AND EXIT FROM MT.PLEASANT ROAD. BUCKEYE WOODWORKERS
More informationthe 360 Volume 25 Issue 1 January 2017 WCWT Christmas Party 2016
Volume 25 Issue 1 January 2017 All the News That Will Fit On the Lathe the 360 A Message From Mark Hubl, Your President Well what a party! Where s my hat? Has anyone seen my hat but seriously I hope that
More informationBWWT MEETING MINUTES SATURDAY MARCH 12, 2016
Contains March 2016 Minutes April, 2016 NO MEMBERS OR VISITORS SHALL EN- TER OR EXIT THE CAMP VIA THE CHRISTMAN ROAD ENTRANCE. MEM- BERS MUST ENTER AND EXIT FROM MT.PLEASANT ROAD. BUCKEYE WOODWORKERS AND
More informationAlabama Woodturners Association
Alabama Woodturners Association April 2010 A member of the American Association of Woodturners Coming Events Location: Homewood Senior Center at 816 Oak Grove Road, Homewood, AL 35209 Web Site: www.alabamawoodturners.com
More informationBetween Turns. Sharpening..In s & Outs. New Mentoring Update. Michigan Association of Woodturers A chapter of the American Association of Woodturners
C O N T A C T U S President: Tom Mogford 810-629-6176 Vice President: Pete Buccelato Between Turns Michigan Association of Woodturers A chapter of the American Association of Woodturners V O L U M E 2
More informationCuts and Scrapes. that s different and. Sat. Oct. 17th. What can I make. unique?
T R I - S T A T E W O O D T U R N E R S Cuts and Scrapes WWW.TRISTATEWOODTURNERS.COM O C T O B E R 2 0 1 5 N E W S L E T T E R P R E S I D E N T : Josh Bowman (423)280-0954 jsbowman@bellsouth.net VP: Doug
More informationCICAAW Turnings. Next month, Jim Dupler is going to mystify us with a tool handle creation demo.
Central Indiana Chapter of the American Association of Woodturners CICAAW Turnings FEBRUARY 2018 January Meeting Notes and Upcoming News The official meeting began at 2p.m. at the Zionsville Boys and Girls
More informationboxes lidded It s hard to top
It s hard to top lidded boxes by Bob Rosand Ever since I started lathe work in the mid-70s, I have enjoyed turning lidded boxes. I based my first boxes on Dale Nish s creative and artistic woodturning
More information*****Note***** Contains March 2018 Minutes April, Buckeye Woodworkers & Woodturners Newsletter April 2018
Contains March 2018 Minutes April, 2018 NO MEMBERS OR VISITORS SHALL ENTER OR EXIT THE CAMP VIA THE CHRISTMAN ROAD EN- TRANCE. MEMBERS MUST ENTER AND EXIT FROM MT.PLEASANT ROAD. BUCKEYE WOODWORKERS AND
More informationMessage from the President
Number 110 Utah Woodchips Newsletter Feb 2011, page 1 Regular Monthly Meeting ( first Tuesday ) 7:00 p.m. Hello Fellow Woodturners, Message from the President February, 2011 So, how many times have you
More informationDave Lancaster will be having an Open Shop at his place from 3:00 PM to 6:30 PM before the meeting.
APRIL 2013 April 17th Dave Lancaster will be having an Open Shop at his place from 3:00 PM to 6:30 PM before the meeting. This is an informal gathering at Dave's shop to socialize and see the shop. David
More informationBand Saw Safety. Shavings-Newsletter of the Quad Cities Woodturners Association
Shavings-Newsletter of the Quad Cities Woodturners Association Band Saw Safety Quad City Wood Turners Volume 5, Issue 2 Feb 2010 Inside this issue: Chri 1 2-3 Critique Table 4-5 Demo Candlesticks 6 Demo
More informationTurning a Christmas Angel
Turning a Christmas Angel Introduction I was at work one day and a co-worker asked if I had ever turned an angel. I said no. She said I picked one up at craft fair while on vacation. Would you like to
More informationTristan s Corner: Hopefully everyone stayed dry last month! I think we might get some drier weather soon.
SOUTHCOAST WOODTURNERS NEWSLETTER News of the South Coast Woodturner s Club A Chapter of the American Association of Woodturner s SouthCoastWoodturners (www.southcoastwoodturners.com) April 8, 2017 Meeting
More informationSeptember Turn and Tell
Alabama Woodturners Association A member of the American Association of Woodturners Location-Homewood Senior Center; 816 Oak Grove Road; Homewood, Alabama 35209 www.alabamawoodturners.com Coming Events
More informationDemo of the Month. Officers & Contacts
Volume 1 Issue 1 March 2012 American Association of Woodturners Chapter Since May 2010 Officers & Contacts CEDAR CITY AREA: PRESIDENT: Will Arcularius (805) 712-2174 arcwerks@scinternet.net VICE PRESIDENT:
More informationAnnouncements from the January Meeting
Announcements from the January Meeting The meeting started off with a Hardy HAPPY NEW YEAR Back in December Dennis Ivans offered a suggestion in having non regular meetings, some call it Sawdust Sessions.
More informationA Member of the American Association of Woodturners
A Member of the American Association of Woodturners April 2016 The monthly newsletter of the Inland Woodturners Square Bowl 1 Officers 2 Candle Stick Holder Written by Larry Cooper Photos by Larry Cooper
More informationBetween Centers Club established
Newsletter of Ozark Woodturners Between Centers Club established 1995 http://www.ozarkwoodturners.com 2016 Club Officers President: Ron Ufkes 870-507-0007 Vice Pres.: Kenneth Higgins 870-405-7283 Treasurer:
More informationBetween Centers Club established
Newsletter of Ozark Woodturners Between Centers Club established 1995 http://www.ozarkwoodturners.com 2015 Officers President: Joe Parks 870-307-8842 Vice President: Jerry Hankins 479-857-3980 Treasurer:
More informationWOOD CHIPS. Northwest Indiana Woodworkers Association Volume 19, Issue 6 June President s Ramblings
WOOD CHIPS Northwest Indiana Woodworkers Association Volume 19, Issue 6 June 2015 President s Ramblings Greetings Fellow Woodworkers, June is upon us and the weather has been terribly wet this past week.
More informationShow and Tell Table. Please make sure to sign the show and tell sheet so credit can be given.
Jim brought in two of his carved and painted vessels. Jim recently demonstrated his techniques at the Blue Water Turners Mini -Symposium. Bill Magee - Black Oak Burl Platter Dennis Stange - Hickory Lidded
More informationMembership dues for 2018 are now due and payable. Application is attached to this newsletter.
www.brasstownwoodturners.org Terrence Powell BWG News Editor terrence.powell1963@gmail.com Next meeting is: December 2, 2017, at 11:00 a.m. This is our annual Christmas party and dinner. We will be meeting
More informationNorth Alabama Woodturners Boaz, Alabama
North Alabama Woodturners Boaz, Alabama Hosting Jimmy Clewes from Las Vegas, Nevada From Jimmy's Website: Jimmy is not your ordinary woodturner. Upon a first meeting one would think of him as a renegade,
More informationDecember 7 th Demo: Dave Muckle s Christmas Special
Up. February 2018 Chairman Stan Lax Tel. 01642 652328 : Secretary Brian Haggath Tel. 01642 454064 A belated Happy New Year, but a special one for our 20 th year. Brian has a special article being printed
More informationChristmas Party. December The monthly newsletter of the Inland Woodturners
A Member of the American Association of Woodturners December 2013 Christmas Party 1 Officers 2 Monthly Challenge, Wood Raffle, 2 Instant Gallery 3 Woodturning Schools 4 Upcoming Events 5 Festivities 6
More informationHERTS & BEDS WOODTURNERS WOODBITS
March 2018 Issue 142 2018 Competition Subjects Mar April May June July Aug Sept Oct Nov Dec 2 or more woods Decorated Easter egg Hollow form Platter Mallet Egg & Cup Round bottomed bowl Ball Candle holder
More informationThe Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners
The Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners October 2013 In this issue News Items............... Page 1 Upcoming Meeting Notes.... Page
More informationCentral Coast Woodturners Of California
Central Coast Woodturners Of California CCW a chapter of American Assoc. of Woodturners Bill Kandler President 805 489 5309 Gordon Rowland Vice President 805 929 4101 Terry Cohen Treasurer 805 747 4584
More informationLichtenberg Pyrography
CALGARY WOODTURNERS GUILD NEWSLETTER May 2, 2017 Issue 71, May 2017 Lichtenberg Pyrography The Last Meeting Pages 2-4 Presentations: Lichtenberg Pyrography Page 2 Bert's Presentation See Seperate Attachment
More informationEchos From the BAT. Cave. David Ellsworth. Baltimore Area Turners. Inside this issue: David Ellsworth 2 D&D Log Cradle 5 Other Stuff 6.
Echos From the BAT Baltimore Area Turners Cave March, 2012 David Ellsworth Inside this issue: David Ellsworth 2 D&D Log Cradle 5 Other Stuff 6 2012 Officers: In March, BAT was graced with a visit by Grandmaster
More informationOFFICERS: President Wayne Collins Vice President Mark Nadeau Secretary Bernie Feinerman Treasurer Bob Hopkins
OFFICERS: President Wayne Collins Vice President Mark Nadeau Secretary Bernie Feinerman Treasurer Bob Hopkins Our Website: http://www.oceanwoodturners.com/: Webmaster: Member, Henry Allsworth A chapter
More informationPBCW News Volume 11, Issue 4 : April 2013
Promoting the Art And Craft Of Woodturning PBCW News Volume 11, Issue 4 : April 2013 PBCW April Meeting will be held at Okeeheelee Nature Center 4/27 Inside This Issue: Coming Events 6 Scholarships 6 Gallery
More informationClass Descriptions for DWR2016
John Beaver Class Descriptions for DWR2016 Wave Bowls I will demonstrate the basic techniques to make my signature Wave bowls. First project will begin with a solid block of wood and free hand cut on a
More informationCentral Coast Woodturners California
Central Coast Woodturners California Bits and Pieces of March & April 2017 The members of CCW wish again to thank Dennis & Leslie Ivans for their hospitality to Derek Weidman and to the viewers of the
More informationArtistic Woodturners Meeting of 12 August 2017
Artistic Woodturners Meeting of 12 August 2017 Meeting was called to order by Norm Freeman. One visitor, Mike Francis, president of Azalea Woodturners, was recognized. 25 members attended. Business portion
More informationNatural Edge Wing Bowl from a Half log or crotch section We will be turning a thin natural edge wing bowl from a green log or crotch section.
Natural Edge Wing Bowl from a Half log or crotch section We will be turning a thin natural edge wing bowl from a green log or crotch section. Design and layout considerations regarding limb orientation,
More informationProviding an environment that fosters the art and craft of woodturning A Publication of the Peace River Woodturners
April 2016 This n That Show & Tell Al Stirt Gavel Turning Ray Fenton Dizzy Bowl Providing an environment that fosters the art and craft of woodturning A Publication of the Peace River Woodturners Chips
More informationThe Nutmeg. Newsletter of the Nutmeg Woodturners League Established June 14, NEXT MEETING March 13, 2017
The Nutmeg Newsletter of the Nutmeg Woodturners League Established June 14, 1989 Volume 30, No. 2 March, 2017 www.nutmegwoodturners.com NEXT MEETING March 13, 2017 Program: Favorite Jigs and Fixtures Demonstrator:
More informationOffset turning female form
A Member of the American Association of Woodturners November 2016 The monthly newsletter of the Inland Woodturners Offeset Turning 1 Officers 2 Offset turning female form Written by Larry Cooper Photos
More informationFinger Lakes Woodturners A Chapter of The American Association of Woodturners
Finger Lakes Woodturners A Chapter of The American Association of Woodturners Presidential Mumblings October 2017 This month we will be hosting Tom Wirsing, a National Turner. This is a joint effort with
More information