Technical specification FLUXUS G608**-F2

Transcription

1 Tecnica specification Portae utrasonic fow measurement of gas in azardous areas Portae instrument for non-invasive, quick utrasonic fow measurement wit camp-on tecnoogy for a types of piping Features Precise i-directiona and igy dynamic fow measurement wit te non-invasive camp-on tecnoogy Hig precision at fast and sow fow rates, ig temperature and zero point staiity Portae, easy-to-use fow transmitter wit 2 fow cannes, mutipe inputs, an integrated data ogger wit a seria interface Extremey resistant caron fier ousing Covered y FM cass I Div. 2 certification Compact and very igtweigt, aowing te measuring system to e easiy carried as persona uggage, e.g. for offsore visits Water tigt; resistant against oi, many iquids and dirt Li-Ion attery provides up to 25 ours of measurement operation Automatic oading of cairation data and transducer detection for a fast and easy set-up (ess tan 5 min), providing precise and ong-term stae resuts User-friendy design Transducers avaiae for a wide range of inner pipe diameters and fuid temperatures Rugged transducers (FM Cass 1 Div. 2, resistant to roug environments and umidity) Roust, water-tigt (IP67) transport case wit compreensive accessories QuickFix for fast mounting of te fow transmitter in difficut conditions Incuding measurement of iquids FLUXUS G608 FLUXUS G608 supported y ande Measurement wit transducers mounted wit te portae Variofix VP Appications Designed for te foowing industries: Upstream (on- and offsore) Midstream and downstream (pipeines and refineries) Cemica industry Energy sector (e.g. HVAC, geoterma, power pants) FLUXUS G608 Measurement wit te fow transmitter fixed to te pipe wit te QuickFix pipe mounting fixture TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

2 Tecnica specification Tae of contents Function... 3 Measurement principe... 3 Cacuation of voumetric fow rate... 3 Numer of sound pats... 4 Typica measurement setup... 4 Standard voumetric fow rate... 5 Fow transmitter... 6 Tecnica data... 6 Dimensions... 7 Standard scope of suppy... 7 Adapters (optiona)... 8 Transducers... 9 Transducer seection... 9 Transducer order code Tecnica data Transducer mounting fixture Couping materias for transducers Damping mats (optiona) Connection systems Transducer cae Camp-on temperature proe (optiona) Wa tickness measurement (optiona) TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

3 Tecnica specification Function Measurement principe In order to measure te fow of a fuid in a pipe, utrasonic signas are used, empoying te transit time difference principe. Utrasonic signas are emitted y a transducer instaed on te pipe and received y a second transducer. Tese signas are emitted aternatey in te fow direction and against it. As te fuid in wic te signas propagate is fowing, te transit time of te utrasonic signas in te fow direction is sorter tan against te fow direction. Te transit time difference, t, is measured and aows te fowmeter to determine te average fow veocity aong te propagation pat of te utrasonic signas. A fow profie correction is ten performed in order to otain te area averaged fow veocity, wic is proportiona to te voumetric fow rate. Two integrated microprocessors contro te entire measuring process. Tis aows te fowmeter to remove disturance signas, and to ceck eac received utrasonic wave for its vaidity wic reduces noise. J J J Pat of te utrasonic signa Transit time difference t Cacuation of voumetric fow rate V = k. Re A. k. a t/(2. t f ) were V - voumetric fow rate k Re - fuid mecanics cairation factor A - cross-sectiona pipe area k a - acoustica cairation factor t - transit time difference t f - transit time in te fuid TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

4 ! N.. 1/ 0 6 Tecnica specification Numer of sound pats Te numer of sound pats is te numer of transits of te utrasonic signa troug te fuid in te pipe. Depending on te numer of sound pats, te foowing metods of instaation exist: refection arrangement Te numer of sound pats is even. Bot of te transducers are mounted on te same side of te pipe. Correct positioning of te transducers is easier. diagona arrangement Te numer of sound pats is odd. Bot of te transducers are mounted on opposite sides of te pipe. In te case of a ig signa attenuation y te fuid, pipe and coatings, diagona arrangement wit 1 sound pat wi e used. Te preferred metod of instaation depends on te appication. Wie increasing te numer of sound pats increases te accuracy of te measurement, signa attenuation increases as we. Te optimum numer of sound pats for te parameters of te appication wi e determined automaticay y te transmitter. As te transducers can e mounted wit te transducer mounting fixture in refection arrangement or diagona arrangement, te numer of sound pats can e adjusted optimay for te appication.. a a - transducer distance Refection arrangement, numer of sound pats: 2 a Diagona arrangement, numer of sound pats: 3 a > 0 a < 0 Diagona arrangement, numer of sound pats: 1 Diagona arrangement, numer of sound pats: 1, negative transducer distance Typica measurement setup transducers damping mat ) ) - ) + 0 ) - * : 6 % &, 15 2 ' " # $ :, !, - * 4 * ) ; transmitter temperature inputs Exampe of a refection arrangement 4 TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

5 Tecnica specification Standard voumetric fow rate Te standard voumetric fow rate can e seected as pysica quantity to e measured. It wi e cacuated internay y: V N = V. p/p. N T N /T. 1/K were V N - standard voumetric fow rate V - operating voumetric fow rate p N - standard pressure (asoute vaue) p - operating pressure (asoute vaue) T N - standard temperature in K T - operating temperature in K K - compressiiity coefficient of te gas: ratio of te compressiiity factors of te gas at operating conditions and at standard conditions Z/Z N Te operationa pressure p and te operationa temperature T of te fuid wi e entered directy as fixed vaues into te transmitter. or: If inputs are instaed (optiona), pressure and temperature can e measured y te customer and fed in te transmitter. Te gas compressiiity coefficient K of te gas is entered in te transmitter: as fixed vaue or as approximation according to e.g. AGA8 or GERG TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

6 Tecnica specification Fow transmitter Tecnica data FLUXUS G608**-F2 design portae, FM cass I Div. 2 measurement measurement principe fow veocity repeataiity fuid temperature compensation accuracy voumetric fow rate fow transmitter power suppy transit time difference correation principe m/s, depending on pipe diameter 0.15 % of reading ±0.01 m/s a acousticay conductive gases, e.g. nitrogen, air, oxygen, ydrogen, argon, eium, etyene, propane corresponding to te recommendations in ANSI/ASME MFC ± % of reading ±0.01 m/s depending on appication ± 0.5 % of reading ±0.01 m/s wit fied cairation V/ Hz (power suppy unit, outside of exposive atmospere) V DC (socket at transmitter, wit power adapter (optiona)) integrated attery Li-Ion, 7.2 V/6.2 A integrated attery - operating time > 14 (witout inputs and ackigt) > 25 (1 measuring canne, amient temperature > 10 C, witout inputs and ackigt) power consumption < 6 W (wit inputs and ackigt) numer of fow measuring 2 cannes damping s, adjustae measuring cyce (1 canne) Hz response time 1 s (1 canne), option: 70 ms ousing materia PA, TPS, PC, Poyester, stainess stee degree of protection according IP65 to IEC/EN dimensions see dimensiona drawing weigt 2.2 kg fixation QuickFix pipe mounting fixture amient temperature C dispay 2 x 16 caracters, dot matrix, ackigt menu anguage Engis, German, Frenc, Dutc, Spanis exposion protection marking NI/C. I /Div. 2/ F GP. A,B,C,D / M T5 Ta = 60 C measuring functions pysica quantities totaizer cacuation functions diagnostic functions communication interfaces diagnostic interfaces seria data kit software сae adapter data ogger oggae vaues capacity transport case dimensions operating voumetric fow rate, standard voumetric fow rate, mass fow rate, fow veocity voume, mass average, difference, sum sound speed, signa ampitude, SNR, SCNR, standard deviation of ampitudes and transit times - RS232 - USB (wit adapter) - FuxDiagReader: downoad of measured vaues and parameters, grapica presentation - FuxDiag (optiona): downoad of measurement data, grapica presentation, report generation - FuxSustanceLoader: upoad of fuid data sets RS232 RS232 - USB a pysica quantities, totaized vaues and diagnostic vaues > measured vaues 500 x 400 x 190 mm 6 TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

7 1 F K J 6 6! 6 6 " Tecnica specification FLUXUS G608**-F2 inputs Te inputs are gavanicay isoated from te transmitter. numer max. 4 accessories input adapter (if numer of inputs > 2) temperature input type Pt100/Pt1000 connection 4-wire range C resoution 0.01 K accuracy ±0.01 % of reading ±0.03 K For te tecnica data in te fow measurement of iquids mode see Tecnica specification TSFLUXUS_F608xx-F2Vx-x. Dimensions ) ) - ) + 0 ) - * : 6 % & 3 3 " # $ 7 :, !, - 1/ 0 6! N.. * 4 * ) ;, 15 2 ' in mm Standard scope of suppy G608 Standard G608 CA-Energy appication fow measurement on gas fow measurement on compressed air, industria gases and iquids 2 independent measuring cannes cacuation of standard voumetric fow rate inputs temperature input - 4 accessories transport case x x power suppy unit, mains cae x x attery x x input adapter - 2 QuickFix pipe mounting fixture x x for transmitter seria data kit x x measuring tape x x wa tickness proe - x user manua, safety instructions, Quick start guide connector oard at te upper side of te transmitter x + 0 ) + 0 * +, + 1 cacuation of standard voumetric fow rate, wit optiona use of current measured temperature vaues iquids: integrated eat fow computer for monitoring of energy fows x + 0 ) + 0 * +, + 1 TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

8 Tecnica specification Adapters (optiona) input adapter transducers measuring canne A 1 F K J + 0 ) 6 6! 6 6 " + 0 * +, + 1 transducers measuring canne B RS232 inputs power suppy unit/attery carging unit 8 TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

9 Tecnica specification Transducers Transducer seection Step 1a Seect a Lam wave transducer: transducer order code GLF GLG GLH 8 16 GLK 5 10 GLM GLP GLQ Step 1 If te pipe wa tickness is not in te range of te Lam wave transducers, seect a sear wave transducer: transducer order code pipe wa tickness [mm] GSG 11 GSK 5 GSM 2 GSP 1 GSQ pipe wa tickness [mm] recommended possie Step 2 inner pipe diameter d dependent on te fow veocity v of te fuid in te pipe Te transducers are seected from te caracteristics (see next page). Lam wave transducers are seected from te eft coumn, sear wave transducers from te rigt coumn. Lam wave transducers: If te vaues d and v are not in te range, te diagona arrangement wit 1 sound pat may e used, i.e. te same caracteristics can e used wit douing te inner pipe diameter. If te vaues are sti not in te range, sear waves transducers regarding te pipe wa tickness ave to e seected in step 1. TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

10 Tecnica specification Lam wave transducer 1 sear wave transducer 1 GLF GLG GSG GLH GLK GSK GLM GSM GLP GSP 1 inner pipe diameter and max. fow veocity for a typica appication wit natura gas, nitrogen, oxygen in refection arrangement wit 2 sound pats (Lam wave transducers)/1 sound pat (sear wave transducers) 10 TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

11 Tecnica specification Lam wave transducer 1 sear wave transducer 1 GLQ GSQ 1 inner pipe diameter and max. fow veocity for a typica appication wit natura gas, nitrogen, oxygen in refection arrangement wit 2 sound pats (Lam wave transducers)/1 sound pat (sear wave transducers) Step 3 min. fuid pressure Lam wave transducer sear wave transducer transducer fuid pressure 1 [ar] transducer fuid pressure 1 [ar] order code meta pipe pastic pipe order code meta pipe pastic pipe min. min. extended min. min. min. extended min. GLF GLG GSG GLH GLK 15 (d > 120 mm) 10 (d > 120 mm) 1 GSK (d < 120 mm) 3 (d < 120 mm) GLM 10 (d > 60 mm) 3 (d < 60 mm) 1 GSM (d < 60 mm) GLP 10 (d > 35 mm) 3 (d < 35 mm) 1 GSP (d < 35 mm) GLQ 10 (d > 15 mm) 3 (d < 15 mm) 1 GSQ (d < 15 mm) 1 depending on appication, typica asoute vaue for natura gas, nitrogen, compressed air d - inner pipe diameter Exampe step 1 pipe wa tickness mm seected transducer GLG or GLH GLH or GLK GS 2 inner pipe diameter mm max. fow veocity m/s seected transducer GLG GLK GSK 3 min. fuid pressure ar seected transducer GLG GLK GSK Step 4 for te caracters of te transducer order code (amient temperature, exposion protection, connection system, extension cae) see page 12 Step 5 for te tecnica data of te seected transducer see page 13 et seqq. TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

12 Tecnica specification Transducer order code 1, , 6 7, no. of caracter transducer transducer frequency amient temperature exposion protection connection system extension cae description - - GL set of utrasonic fow transducers for gas measurement, Lam wave GS set of utrasonic fow transducers for gas measurement, sear wave F 0.15 MHz (Lam wave ony) G 0.2 MHz H 0.3 MHz (Lam wave ony) K 0.5 MHz M 1 MHz P 2 MHz Q 4 MHz N norma temperature range E extended temperature range (FSM, FSP, FSQ) F2 FM Cass I Div. 2 NL wit Lemo connector XXX cae engt in m, for max. engt of extension cae see page 21 exampe GL K - N F2 NL Lam wave transducer 0.5 MHz, norma temperature range, FM Cass I Div. 2, connection system NL wit Lemo connector and extension cae 10 m TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

13 Tecnica specification Tecnica data Sear wave transducers tecnica type GDG1N51 GDK1N51 order code GSG-NF2NL GSK-NF2NL transducer frequency MHz fuid pressure 1 min. extended ar meta pipe: 20 meta pipe: 20 min. ar meta pipe: 30 pastic pipe: 1 inner pipe diameter d 2 min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm 11 5 materia ousing meta pipe: 30 pastic pipe: 1 PEEK wit stainess stee cap 304 (1.4301) contact surface PEEK PEEK degree of protection IP67 IP67 according to IEC/ EN transducer cae type engt m 5 5 dimensions engt mm widt mm eigt mm dimensiona drawing PEEK wit stainess stee cap 304 (1.4301) amient temperature min. C max. C temperature compensation x x exposion protection F M exposion protection temperature min. C max. C marking NI/C. I,II,III/Div. 2 / NI/C. I,II,III/Div. 2 / type of protection non incendive non incendive 1 depending on appication, typica asoute vaue for natura gas, nitrogen, compressed air 2 sear wave transducer: typica vaues for natura gas, nitrogen, oxygen, pipe diameters for oter fuids on request inner pipe diameter max. recommended/max. extended: in refection arrangement and for a fow veocity of 15 m/s TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

14 Tecnica specification tecnica type GDM1N51 GDP1N51 GDQ1N51 order code GSM-NF2NL GSP-NF2NL GSQ-NF2NL transducer frequency MHz fuid pressure 1 min. extended ar meta pipe: 20 meta pipe: 20 meta pipe: 20 min. ar meta pipe: 30 pastic pipe: 1 meta pipe: 30 pastic pipe: 1 meta pipe: 30 pastic pipe: 1 inner pipe diameter d 2 min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm materia ousing stainess stee 304 (1.4301) stainess stee 304 (1.4301) contact surface PEEK PEEK PEEK degree of protection IP67 IP67 IP67 according to IEC/ EN transducer cae type engt m dimensions engt mm widt mm eigt mm dimensiona drawing stainess stee 304 (1.4301) amient temperature min. C max. C temperature compensation x x x exposion protection exposion protection temperature min. C F M max. C marking NI/C. I,II,III/Div. 2 / NI/C. I,II,III/Div. 2 / NI/C. I,II,III/Div. 2 / type of protection non incendive non incendive non incendive remark on request 1 depending on appication, typica asoute vaue for natura gas, nitrogen, compressed air 2 sear wave transducer: typica vaues for natura gas, nitrogen, oxygen, pipe diameters for oter fuids on request inner pipe diameter max. recommended/max. extended: in refection arrangement and for a fow veocity of 15 m/s 14 TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

15 Tecnica specification Sear wave transducers (extended temperature range) tecnica type GDM1E51 GDP1E51 GDQ1E51 order code GSM-EF2NL GSP-EF2NL GSQ-EF2NL transducer frequency MHz fuid pressure 1 min. extended ar meta pipe: 20 meta pipe: 20 meta pipe: 20 min. ar meta pipe: 30 pastic pipe: 1 meta pipe: 30 pastic pipe: 1 inner pipe diameter d 2 min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm materia ousing stainess stee 304 (1.4301) meta pipe: 30 pastic pipe: 1 stainess stee 304 (1.4301) contact surface Sintimid Sintimid Sintimid degree of protection IP65 IP65 IP65 according to IEC/ EN transducer cae type engt m dimensions engt mm widt mm eigt mm dimensiona drawing stainess stee 304 (1.4301) amient temperature min. C max. C temperature compensation x x x exposion protection exposion protection temperature min. C F M max. C marking NI/C. I,II,III/Div. 2 / NI/C. I,II,III/Div. 2 / NI/C. I,II,III/Div. 2 / type of protection non incendive non incendive non incendive remark on request 1 depending on appication, typica asoute vaue for natura gas, nitrogen, compressed air 2 sear wave transducer: typica vaues for natura gas, nitrogen, oxygen, pipe diameters for oter fuids on request inner pipe diameter max. recommended/max. extended: in refection arrangement and for a fow veocity of 15 m/s TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

16 Tecnica specification Lam Wave Transducers tecnica type GRF1N51 GRG1N51 GRH1N51 GRK1N51 order code GLF-NF2NL GLG-NF2NL GLH-NF2NL GLK-NF2NL transducer frequency MHz fuid pressure 1 min. extended ar meta pipe: 10 meta pipe: 10 meta pipe: 10 meta pipe: 10 (d > 120 mm) 3 (d < 120 mm) min. ar meta pipe: 15 pastic pipe: 1 meta pipe: 15 pastic pipe: 1 meta pipe: 15 pastic pipe: 1 inner pipe diameter d 2 min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm max. mm max. extended mm materia ousing PPSU wit stainess stee PPSU wit stainess stee PPSU wit stainess stee cap 304 (1.4301) cap 304 (1.4301) cap 304 (1.4301) contact surface PPSU PPSU PPSU PPSU degree of protection IP65 IP67 IP67 IP67 according to IEC/ EN transducer cae type engt m dimensions engt mm widt mm eigt mm dimensiona drawing meta pipe: 15 (d > 120 mm) 10 (d < 120 mm) pastic pipe: 1 PPSU wit stainess stee cap 304 (1.4301) amient temperature min. C max. C temperature x x x x compensation exposion protection exposion protection temperature min. C F M max. C marking NI/C. I,II,III/Div. 2 / NI/C. I,II,III/Div. 2 / NI/C. I,II,III/Div. 2 / NI/C. I,II,III/Div. 2 / type of protection non incendive non incendive non incendive non incendive 1 depending on appication, typica asoute vaue for natura gas, nitrogen, compressed air 2 Lam wave transducer: typica vaues for natura gas, nitrogen, oxygen, pipe diameters for oter fuids on request inner pipe diameter max. recommended: in refection arrangement (diagona arrangement) and for a fow veocity of 15 m/s (30 m/s) inner pipe diameter max. extended: in refection arrangement (diagona arrangement) and for a fow veocity of 12 m/s (25 m/s) 16 TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

17 Tecnica specification tecnica type GRM1N51 GRP1N51 GRQ1N51 order code GLM-NF2NL GLP-NF2NL GLQ-NF2NL transducer frequency MHz fuid pressure 1 min. extended ar meta pipe: 3 (d < 60 mm) meta pipe: 3 (d < 35 mm) meta pipe: 3 (d < 15 mm) min. ar meta pipe: 10 (d > 60 mm) 5 (d < 60 mm) pastic pipe: 1 meta pipe: 10 (d > 35 mm) 5 (d < 35 mm) pastic pipe: 1 inner pipe diameter d 2 min. extended mm min. recommended mm max. recommended mm max. extended mm pipe wa tickness min. mm max. mm max. extended mm materia ousing PPSU wit stainess stee PPSU wit stainess stee cap 304 (1.4301) cap 304 (1.4301) contact surface PPSU PPSU PPSU degree of protection IP65 IP65 IP65 according to IEC/ EN transducer cae type engt m dimensions engt mm widt mm eigt mm dimensiona drawing meta pipe: 10 (d > 15 mm) 5 (d < 15 mm) pastic pipe: 1 PPSU wit stainess stee cap 304 (1.4301) amient temperature min. C max. C temperature compensation x x x exposion protection temperature min. C F M max. C marking NI/C. I,II,III/Div. 2 / NI/C. I,II,III/Div. 2 / NI/C. I,II,III/Div. 2 / type of protection non incendive non incendive non incendive remark on request 2 Lam wave transducer: typica vaues for natura gas, nitrogen, oxygen, pipe diameters for oter fuids on request inner pipe diameter max. recommended: in refection arrangement (diagona arrangement) and for a fow veocity of 15 m/s (30 m/s) inner pipe diameter max. extended: in refection arrangement (diagona arrangement) and for a fow veocity of 12 m/s (25 m/s) TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

18 Tecnica specification Transducer mounting fixture Order code 1, no. of caracter description transducer mounting fixture transducer measurement arrangement size fixation outer pipe diameter - - VP portae Variofix TB tension ets A a transducers D refection arrangement or diagona arrangement R refection arrangement M medium C cains N witout fixation mm mm mm exampe VP A - D M - C 055 portae Variofix and cains - - portae Variofix VP and cains materia: stainess stee 304 (1.4301), 301 (1.4310), 303 (1.4305) dimensions: 414 x 94 x 76 mm cain engt: 2 m tension ets TB materia: stee, powder coated and textie tension et engt: 5/7 m amient temperature: max. 60 C outer pipe diameter: max. 1500/2100 mm 18 TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

19 Tecnica specification Couping materias for transducers norma temperature range (4t caracter of transducer order code = N) extended temperature range (4t caracter of transducer order code = E) < 100 C < 170 C < 150 C < 200 C couping compound type N couping compound type E couping compound type E couping compound type E or H Tecnica data type amient temperature materia C couping compound minera grease paste type N couping compound siicone paste type E couping compound type H fuoropoymer paste TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

20 Tecnica specification Damping mats (optiona) Damping mats wi e used for te gas measurement to reduce acoustic noise infuences on te measurement. Transducer damping mats wi e instaed eow te transducers. Pipe damping mats wi e instaed at refection points, e.g. fange, wed. transducer damping mat pipe damping mat D D - outer pipe diameter refection point diagona arrangement refection arrangement Seection of damping mats type description outer pipe diameter dimensions x x transducer frequency tecnica type amient temperature mm mm F G H K M P Q C transducer damping mat D for temporary instaation < x 115 x x x x D20S (mutipe use), fixed wit x 230 x x x - - D20S2 couping compound 900 x 230 x 1.3 x x x D50S2 pipe damping mat A for temporary instaation (mutipe use), fixed wit couping compound remark < x 115 x 0.5 x x x x x x x A20S for quantity see tae eow B sef-adesive 300 x 100 x 0.9 x x x x x x - B35R see tae eow Quantity for pipe damping mat - type A (depending on te outer pipe diameter) outer pipe diameter D transducer frequency mm F, G, H K, M, P, Q Lengt of pipe damping mat - type B (engt depending on transducer frequency and outer pipe diameter) outer pipe diameter D transducer frequency F, G, H K, M, P mm m m TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

21 Tecnica specification Connection systems connection system NL x y transmitter N L transducer frequency (3d caracter of transducer order code) F, G, H, K M, P Q S x y x y x y x y cae engt m x, y - transducer cae engt - max. engt of extension cae Transducer cae Tecnica data transducer cae extension cae type standard engt m see tae aove 5 10 max. engt m - 10 amient temperature C < 80 cae jacket materia PTFE PE outer diameter mm tickness mm coour rown ack sied x x seat materia stainess stee 304 (1.4301) stainess stee 304 (1.4301) outer diameter mm 8 9 TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

22 Tecnica specification Camp-on temperature proe (optiona) Tecnica data tecnica type PT12N PT12F design sort response time type Pt100 Pt100 connection 4-wire 4-wire measuring range C accuracy T ±(0.15 C T [ C] ) cass A ±(0.15 C T [ C] ) cass A accuracy T (2x Pt matced according 0.1 K (3 K < T < 6 K), more corresponding to EN K (3 K < T < 6 K), more corresponding to EN to EN ) response time s 50 8 ousing auminum PEEK, stainess stee 304 (1.4301), copper degree of protection IP66 IP66 according to IEC/ EN weigt (witout connector) kg fixation camp-on camp-on accessories terma conductivity x x paste 200 C terma conductivity x x foi 250 C pastic protection pate, - x insuation foam dimensions engt mm widt mm eigt mm PT12N extension cae PT12F Connection Temperature proe red/ue red wite/ue wite 22 TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

23 Tecnica specification Connector pin cae of temperature proe extension cae 1 wite/ue ue 2 red/ue grey 3, 4, 5 not connected 6 red red 7 wite wite 8 not connected Cae " # &! $ % cae of temperature proe extension cae type 4 x 0.25 mm² ack LIYCY 8 x 0.14 mm² grey standard engt m 3 5/10/25 max. engt m cae jacket PTFE PVC TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

24 Tecnica specification Wa tickness measurement (optiona) Te pipe wa tickness is an important pipe parameter wic as to e determined exacty for a good measurement. However, te pipe wa tickness often is unknown. Te wa tickness proe can e connected to te transmitter instead of te fow transducers and te wa tickness measurement mode is activated automaticay. Acoustic couping compound is appied to te wa tickness proe wic ten is paced firmy on te pipe. Te wa tickness is dispayed and can e stored directy in te transmitter. Tecnica data tecnica type DWR1NZ7 measuring range 1 mm resoution mm 0.01 accuracy 1 % ± 0.1 mm fuid temperature C , sort-time peak max. 500 exposion protection - сae type 2616 engt m Te measuring range depends on te attenuation of te utrasonic signa in te pipe. For strongy attenuating pastics (e.g. PFA, PTFE, PP) te measuring range is smaer. Cae type 2616 amient temperature C <200 cae jacket materia FEP outer diameter mm 5.1 coour ack sied x DWR1NZ7 24 TSFLUXUS_G608xx-F2V2-1-4EN_Leu,

25 Tecnica specification FLEXIM GmH internet: Wofener Str. 36 e-mai: Berin Germany Suject to cange witout notification. Errors excepted. Te.: +49 (30) FLUXUS is a registered trademark of FLEXIM GmH. 28 Fax: +49 (30) TSFLUXUS_G608xx-F2V2-1-4EN_Leu,