SGM Ω, 300MHz Bandwidth, Dual, SPDT Analog Switch
|
|
- Jody Stevenson
- 5 years ago
- Views:
Transcription
1 GENERAL DESCRIPTION Th SGM4717 is a dual, bidirctional, singl-pol/ doubl-throw (SPDT) CMOS analog switch dsignd to oprat from a singl 1.8V to 5.5V supply. It faturs high-bandwidth (300MHz) and low on-rsistanc (4.5Ω TYP), targtd applications for audio switching. SGM4717 faturs guarantd on-rsistanc matching (0.3Ω MAX) btwn switchs and guarantd onrsistanc flatnss ovr th signal rang (2.3Ω TYP). This nsurs xcllnt linarity and low distortion whn switching audio signals. Th SGM4717 is a committd dual singl-pol/doubl -throw (SPDT) that consist of two normally opn (NO) and two normally clos (NC) switchs. This configuration can b usd as a dual 2-to-1 multiplxr. FEATURES Voltag Opration: 1.8V to 5.5V On-Rsistanc: 4.5Ω (TYP) at 5.0V High Bandwidth: 300MHz Fast Switching Tims t ON 26ns t OFF 20ns High Off-Isolation: -57dB at 10MHz Low Crosstalk: -99dB at 10MHz Rail-to-Rail Opration TTL/CMOS Compatibl Brak-Bfor-Mak Switching Extndd Industrial Tmpratur Rang: -40 to +85 MSOP-10 and CSP-10 Packags PIN CONFIGURATIONS (TOP VIEW) SGM4717 is availabl in MSOP-10 and CSP-10 SGM4717YMS packags NO2 APPLICATIONS NO Portabl Instrumntation Battry-Opratd Equipmnt Computr Priphrals Cll Phons PDAs MP3s 1 IN1 NC MSOP-10 SGM4717YG C B A IN2 NC2 NC1 NC2 1 FUNCTION TABLE IN1 IN2 2 LOGIC NO NC 0 OFF ON 1 ON OFF Switchs Shown For Logic 0 Input 1 2 NO1 V+ NO2 CSP REV. B. 2
2 ORDERING INFORMATION MODEL SGM4717 PIN- PACKAGE SPECIFIED TEMPERATURE RANGE ORDERING NUMBER PACKAGE MARKING PACKAGE OPTION CSP to +85 SGM4717YG/TR 4717YG Tap and Rl, 3000 MSOP to +85 SGM4717YMS/TR SGM4717YMS Tap and Rl, 3000 ABSOLUTE MAXIMUM RATINGS, IN to v to 6V Analog, Digital voltag rang (1) V to ( ) + 0.3V Continuous Currnt NO, NC, or...±50ma Pak Currnt NO, NC, or...±80ma Oprating Tmpratur Rang to +85 Junction Tmpratur Storag Tmpratur to +150 Lad Tmpratur (soldring, 10s) ESD (HBM) V Strsss byond thos listd undr Absolut Maximum Ratings may caus prmannt damag to th dvic. Ths ar strss ratings only, and functional opration of th dvic at ths or any othr conditions byond thos indicatd in th oprational sctions of th spcifications is not implid. Exposur to absolut maximum rating conditions for xtndd priods may affct dvic rliability. (1) Signals on NC, NO, or or IN xcding V+ will b clampd by intrnal diods. Limit forward diod currnt to maximum currnt ratings. CAUTION This intgratd circuit can b damagd by ESD if you don t pay attntion to ESD protction. SGMICRO rcommnds that all intgratd circuits b handld with appropriat prcautions. Failur to obsrv propr handling and installation procdurs can caus damag. ESD damag can rang from subtl prformanc dgradation to complt dvic failur. Prcision intgratd circuits may b mor suscptibl to damag bcaus vry small paramtric changs could caus th dvic not to mt its publishd spcifications. PIN DESCRIPTION NAME IN1, IN2 1, 2 NO1, NO2 NC1, NC2 FUNCTION Powr supply Ground Digital control pin to connct th trminal to th NO or NC trminals Common trminal Normally-opn trminal Normally-closd trminal Not: NO, NC and trminals may b an input or output. 2
3 ELECTRICAL CHARACTERISTICS ( = +4.5V to +5.5V, V IH = +2.0V, V IL = +0.8V, T A = -40 to +85. Typical valus ar at = +5.0V, T A = +25, unlss othrwis notd.) PARAMETER SYMBOL CONDITIONS TEMP MIN TYP MAX UNITS ANALOG SWITCH Analog Signal Rang V NO, V NC, V -40 to V On-Rsistanc R ON = 4.5V, V NO or V NC = 3.5V, Ω I = -10mA, Tst Circuit 1-40 to Ω On-Rsistanc Match Btwn Channls On-Rsistanc Flatnss R ON R FLAT(ON) = 4.5V, V NO or V NC = 3.5V, Ω I = -10mA, Tst Circuit 1-40 to Ω = 4.5V, V NO or V NC = 1.0V, 2.0V, 3.5V, Ω I = -10mA, Tst Circuit 1-40 to Ω Sourc OFF Lakag Currnt I NC(OFF), I NO(OFF) = 5.5V, V NO or V NC = 1.0V, 4.5V, V = 4.5V, 1.0V -40 to µa Channl ON Lakag Currnt DIGITAL INPUTS I NC(ON), I NO(ON), I (ON) = 5.5V, V = 1.0V, 4.5V, V NO or V NC = 1.0V, 4.5V, or floating -40 to µa Input High Voltag V INH -40 to V Input Low Voltag V INL -40 to V Input Lakag Currnt I IN = 5.5V, V IN = 0V or 5.5V -40 to µa DYNAMIC CHARACTERISTICS Turn-On Tim t ON V NO or V NC = 3.0V, V IH = 1.5V, V IL = 0V, = 300Ω, = 35pF, Tst Circuit ns Turn-Off Tim t OFF V NO or V NC = 3.0V, V IH = 1.5V, V IL = 0V, = 300Ω, = 35pF, Tst Circuit ns Brak-Bfor-Mak Tim Dlay t D V NO1 or V NC1 = V NO2 or V NC2 = 3V, = 300Ω, = 35pF, Tst Circuit ns Skw t SKEW R S = 39Ω, = 50pF, Tst Circuit ns Off Isolation O ISO = 50Ω, = 5pF, f = 10MHz db Signal = 0dBm, Tst Circuit 5 f = 1MHz db Channl-to-Channl Crosstalk X TALK = 50Ω, = 5pF, f = 10MHz db Tst Circuit 6 f = 1MHz db 3dB Bandwidth BW Sourc OFF C NC(OFF), Capacitanc C NO(OFF) Channl ON C NC(ON), C NO(ON), Capacitanc C (ON) POWER REQUIREMENTS Signal = 0dBm, = 50Ω, = 5pF, Tst Circuit MHz f = 1MHz pf f = 1MHz pf Powr Supply Rang -40 to V Powr Supply Currnt I + = 5.5V, V IN = 0V or -40 to µa Spcifications subjct to changs without notic. 3
4 ELECTRICAL CHARACTERISTICS ( = +2.7V to +3.6V, V IH = +1.4V, V IL = +0.5V, T A = - 40 to +85. Typical valus ar at = +3.0V, T A = +25, unlss othrwis notd.) PARAMETER SYMBOL CONDITIONS TEMP MIN TYP MAX UNITS ANALOG SWITCH Analog Signal Rang V NO, V NC, V -40 to V On-Rsistanc R ON = 2.7V, V NO or V NC = 1.5V, Ω I = -10mA, Tst Circuit 1-40 to Ω On-Rsistanc Match Btwn Channls On-Rsistanc Flatnss R ON R FLAT(ON) = 2.7V, V NO or V NC = 1.5V, Ω I = -10mA, Tst Circuit 1-40 to Ω = 2.7V, V NO or V NC = 1.0V, 1.5V, 2.0V, Ω I = -10mA, Tst Circuit 1-40 to Ω Sourc OFF Lakag Currnt Channl ON Lakag Currnt DIGITAL INPUTS I NC(OFF), I NO(OFF) I NC(ON), I NO(ON), I (ON) = 3.6V, V NO or V NC = 0.3V, 3.3V, V = 3.3V, 0.3V = 3.6V, V = 0.3V, 3.3V, V NO or V NC = 0.3V, 3.3V, or floating -40 to µa -40 to µa Input High Voltag V INH -40 to V Input Low Voltag V INL -40 to V Input Lakag Currnt I IN = 5.5V, V IN = 0V or 3.6V -40 to µa DYNAMIC CHARACTERISTICS Turn-On Tim Turn-Off Tim Brak-Bfor-Mak Tim Dlay t ON t OFF t D V NO or V NC = 1.5V, V IH = 1.5V, V IL = 0V, = 300Ω, = 35pF, Tst Circuit 2 V NO or V NC = 1.5V, V IH = 1.5V, V IL = 0V, = 300Ω, = 35pF, Tst Circuit 2 V NO1 or V NC1 = V NO2 or V NC2 = 3V, = 300Ω, = 35pF, Tst Circuit ns ns ns Skw t SKEW R S = 39Ω, = 50pF, Tst Circuit ns Off Isolation O ISO = 50Ω, = 5pF, f = 10MHz db Signal = 0dBm, Tst Circuit 5 f = 1MHz db Channl-to-Channl Crosstalk X TALK = 50Ω, = 5pF, f = 10MHz db Tst Circuit 6 f = 1MHz db 3dB Bandwidth Sourc OFF Capacitanc Channl ON Capacitanc POWER REQUIREMENTS BW C NC(OFF), C NO(OFF) C NC(ON), C NO(ON), C (ON) Signal = 0dBm, = 50Ω, = 5pF, Tst Circuit MHz f = 1MHz pf f = 1MHz pf Powr Supply Rang -40 to V Powr Supply Currnt I + = 5.5V, V IN = 0V or -40 to µa Spcifications subjct to changs without notic. 4
5 TYPICAL PERFORMANCE CHARACTERISTICS 3 On Rspons vs. Frquncy 3 On Rspons vs. Frquncy On Rspons (db) V+ = +3V T A = Frquncy (MHz) On Rspons (db) V+ = +5V T A = Frquncy (MHz) On Rspons (db) Rspons vs. Frquncy ON-LOSS OFF-ISOLATION CROSSTALK V+ = +3V T A = Frquncy (MHz) On Rspons (db) Rspons vs. Frquncy OFF-ISOLATION ON-LOSS CROSSTALK V+ = +5V T A = Frquncy (MHz) 5
6 TEST CIRCUITS 10mA V1 NO or NC V NO or V NC R ON = V1/10mA Tst Circuit 1. On Rsistanc 0.1μF NO or NC V IN V NO or V NC IN 300Ω 35pF t ON t OFF Tst Circuit 2. Switching Tims 0.1μF V NO or V NC NC NO V IN 0 IN 300Ω 35pF V NO or V NC t D Tst Circuit 3. Brak-Bfor-Mak Tim Dlay, t D 6
7 TEST CIRCUITS (Cont.) SGM4717 IN + R S IN1 NO1 or NC1 1 OUT + Ris Tim Dlay = t INRISE t OUTRISE Fall Tim Dlay = t INFALL t OUTFALL Ris Tim to Fall Tim Mismatch = t OUTFALL t OUTRISE R S NO2 or NC2 2 IN- OUT- IN2 t INFALL t INRISE V IN+ 0V 10% 10% V IN- 0V t INFALL t INRISE + 0V 10% 10% - 0V ON t SKEW Tst Circuit 4. Output Signal Skw 0.1μF NC NO Sourc Signal 50Ω IN 50Ω 5pF Tst Circuit 5. Off Isolation 7
8 TEST CIRCUITS (Cont.) 0.1μF NO or NC Sourc Signal IN1 50Ω 5pF IN2 N.C. NO or NC 50Ω 5pF Channl To Channl Crosstalk = -20 log V NO or V NC Tst Circuit 6. Channl-to-Channl Crosstalk 0.1μF NO or NC Sourc Signal IN 5pF Tst Circuit 7. -3dB Bandwidth 8
9 PACKAGE OUTLINE DIMENSIONS CSP-10 Pin #1 A s A2 A1 b Diamtr A B C E Top Viw s D Bottom Viw Symbol Dimnsions In Millimtrs Min Nominal Max A A A b D E BASIC s
10 PACKAGE OUTLINE DIMENSIONS MSOP-10 b C E1 E D A1 L θ A2 A Symbol Dimnsions In Millimtrs Dimnsions In Inchs Min Max Min Max A A A b 0.30 TYP TYP c TYP TYP D TYP TYP E E L θ /2008 REV. B. 2 SGMICRO is ddicatd to provid high quality and high prformanc analog IC products to customrs. All SGMICRO products mt th highst industry standards with strict and comprhnsiv tst and quality control systms to achiv world-class consistncy and rliability. For information rgarding SGMICRO Corporation and its products, s 10
SGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70
GENERAL DESCRIPTION The SGM3167 is a single, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switches designed to operate from a single 1.8V to 5.5V supply. It features high-bandwidth (600MHz)
More informationSGM8521/2/4 150kHz, 4.7µA, Rail-to-Rail I/O CMOS Operational Amplifiers
// PRODUCT DESCRIPTION Th (singl),sgm8 (dual) and SGM8 (quad) ar rail-to-rail input and output voltag fdback amplifirs offring low cost. Thy hav a wid input common-mod voltag rang and output voltag swing,
More informationSGM8621/2/3/4 250µA, 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
PRODUCT DESCRIPTION Th SGM86(singl), SGM86(dual), SGM86(singl with shutdown) and SGM864(quad) ar low nois, low voltag, and low powr oprational amplifirs, that can b dsignd into a wid rang of applications.
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSGM8631/2/3/4 470µA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
PRODUCT DESCRIPTION Th SGM86(singl), SGM86(dual), SGM86(singl with shutdown) and SGM864(quad) ar low nois, low voltag, and low powr oprational amplifirs, that can b dsignd into a wid rang of applications.
More informationSGM721/2/3/4 970µA, 10MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
PRODUCT DESCRIPTION Th SGM7 (singl), SGM7 (dual), SGM7 (singl with shutdown) and SGM74 (quad) ar low nois, low voltag, and low powr oprational amplifirs, that can b dsignd into a wid rang of applications.
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4462 is a dual, high-speed, low-voltage, double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single 1.8V to 5.5V power supply. It features high-bandwidth
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4461 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSGM8051/2/4 SGM8053/5 250MHz, Rail-to-Rail Output CMOS Operational Amplifiers
SGM8// SGM8/, Rail-to-Rail Output PRODUCT DESCRIPTION Th SGM8/(singl), SGM8/(dual), SGM8 (quad) ar rail-to-rail output voltag fdback amplifirs offring as of us and low cost. Thy hav bandwidth and slw rat
More informationSGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3003 is a single, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single +1.8V to +5.5V supply. Targeted
More informationSGM Ω, Low Voltage Quad, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power
More informationSGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44599 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSGM3717 4Ω, 400MHz Bandwidth, Dual, SPDT Negative Signal Handling Analog Switch
Preliminary datasheet SGM3717 GENERAL DESCRIPTION The SGM3717 is a dual, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switch designed to operate from a single +2.5V to +5.0V supply. It features
More informationSGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
More informationSGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM2267 is a dual single-pole/double-throw (SPDT) analog switch that is designed to operate from a single +1.8V to +4.2V power supply. Targeted applications include battery powered
More informationSGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
More informationProduct is End of Life FEATURES BENEFITS NC 4 COM 4 COM 1 NC 1
Product is End of Lif Low-Voltag, Low R ON, ual PT nalog Switch G3015 ESCRIPTION Th G3015 is a dual doubl-pol/doubl-throw monolithic CMOS analog switch dsignd for high prformanc switching of analog signals.
More informationBi-Directional N-Channel 20-V (D-S) MOSFET
Bi-Dirctional N-Channl -V (D-S) MOSFET Si9EDB PRODUCT SUMMARY V SS (V) R SS(on) (Ω) I SS (A). at V GS =.5 V 7.6 at V GS = 3.7 V 6..3 at V GS =.5 V 5.. at V GS =. V 5.5 FEATURES TrnchFET Powr MOSFET Ultra-Low
More informationSGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DESCRIPTION The SGM7222 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. SGM7222 is designed for the switching of
More informationAME. Shunt Bandgap Voltage Reference. General Description. Functional Block Diagram. Features. Typical Application. Applications
Gnral Dscription Th is a micropowr 2-trminal band-gap voltag rgulator diod. It oprats ovr a 30µA to 20mA currnt rang. Each circuit is trimmd at wafr sort to provid a ±0.50% and ±0.80% initial tolranc.
More informationTransient Voltage Suppressors / ESD Protectors
Transint Voltag Supprssors / ES Protctors PACN04/4/44/45/46 Faturs Two, thr, four, fiv, or six transint voltag supprssors Compact SMT packag savs board spac and facilitats layout in spac-critical applications
More informationFEATURES GENERAL DESCRIPTION PIN CONFIGURATIONS(TOP VIEW) APPLICATIONS SGM4157YD6 FUNCTION TABLE PIN DESCRIPTION 6 IN GND 5 V+ COM DFN-6 REV.
SPDT 1Ω Analog Switch GENERAL DESCRIPTION The is a single Low ON-Resistance(1Ω), fast single-pole double-throw (SPDT) CMOS switch. It is designed for low operating voltage, high current switching of speaker
More informationSGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode
Dual 58mW Headphone Amplifier GENERAL DESCRIPTION The SGM4809 is a dual audio power amplifier capable of delivering 58mW per channel of continuous average power with less than 0.% distortion(thd N)when
More informationN-Channel 100 V (D-S) 175 C MOSFET
N-Channl V (D-S) 75 C MOSFET SUMN-9 PRODUCT SUMMRY V DS (V) R DS(on) (Ω) ().95 at V GS = V a FETURES TrnchFET Powr MOSFET Nw Packag with Low Thrmal Rsistanc % R g Tstd D TO-263 G G D S Top Viw Ordring
More informationABRIDGED DATA SHEET MAX4852 MAX4852H NC1 COM1 NO1 IN1 IN2 NC2 COM2 NO2. Maxim Integrated Products 1
19-75; Rv 0; 7/0 ABRIDGED DATA SHEET Gnral Dscription Th family of dual SPDT (singl-pol/doubl-throw) switchs oprat from a singl +V to +5.5V supply and can handl signals gratr than th supply rail. Ths switchs
More information1A Low Dropout Voltage Regulator Fixed Output, Fast Response
A Low Dropout Voltag Rgulator Fixd Output, Fast Rspons SPX3940 FEATURES % Output Accuracy SPX3940A Guarantd.5A Pak Currnt Low Quiscnt Currnt Low Dropout Voltag of 280mV at A Extrmly Tight Load and Lin
More informationPTF GOLDMOS Field Effect Transistor 12 Watts, 1.99 GHz
查询 PTF41 供应商 GOLDMOS Fild Effct Transistor Watts, 1.99 GHz Dscription Th is a watt GOLDMOS FET intndd for larg signal amplifir applications from 1. to 2. GHz. It oprats at 38% fficincy with db minimum
More informationSGM7228 Low Cost, High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7228 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7228 is designed for the switching of high-speed
More information4Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power supply.
More informationThe UM4684 is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage
General Description 0.5Ω Low-Voltage Dual SPDT Analog Switch H CSP10 2.0 1.5 EEUE MSOP10 The is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage applications. The has on-resistance
More informationMP2735/MP2736 Low-Voltage 0.45Ω Dual SPDT Analog Switches
The Future of Analog IC Technology GENERAL DESCRIPTION The MP2735/MP2736 are low voltage, low onresistance, dual single-pole, double-throw (SPDT) monolithic CMOS analog switches designed for high performance
More informationEMD4 / UMD4N V CC I C(MAX.) R 1 R 2. 50V 100mA. 47kW. V CC -50V -100mA 10kW. Datasheet
NPN + PNP Complx Digital Transistors (Bias Rsistor Built-in Transistors) Datasht Outlin Paramtr Valu EMT6 UMT6 V CC I C(MAX.) R 1 R 2 50V 100mA 47kW 47kW (1) (2) (3) (6) (5) (4) EMD4 (SC-107C)
More informationSGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7222 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7222 is designed for the switching of high-speed
More informationIMP528 IMP528. High-Volt 220 V PP Driv. ive. Key Features. Applications. Block Diagram
POWER POWER MANAGEMENT MANAGEMENT High-Volt oltag E amp p Driv ivr 220 V PP Driv iv Th is an Elctroluminscnt (E) lamp drivr with th four E lamp driving functions on-chip. Ths ar th switch-mod powr supply,
More informationFAN A, 1.2V Low Dropout Linear Regulator for VRM8.5. Features. Description. Applications. Typical Application.
www.fairchildsmi.com 2.7A, 1.2V Low Dropout Linar Rgulator for VRM8.5 Faturs Fast transint rspons Low dropout voltag at up to 2.7A Load rgulation: 0.05% typical Trimmd currnt limit On-chip thrmal limiting
More informationHSMP-482B RF power limiter diode
Products > RF Is/iscrts > PIN iods > Surfac Mount > HSMP-482 HSMP-482 RF powr limitr diod scription ifcycl status: ctiv Faturs Th HSMP-482x family of low rsistanc PIN diods ar optimizd for switch applications
More informationSGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch
GERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/ double-throw (SPDT) CMOS video analog switch (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer
More informationEMD3 / UMD3N / IMD3A V CC I C(MAX.) R 1 R 2. 50V 100mA. 10k. 10k. 50V 100mA. 10k. 10k. Datasheet
NPN + PNP Complx Digital Transistors (Bias Rsistor Built-in Transistors) Datasht Outlin Paramtr Valu MT6 UMT6 V CC I C(MX.) Paramtr V CC I C(MX.) 50V 100m 10k 10k Valu 50V
More informationRClamp2451ZA. Ultra Small RailClamp 1-Line, 24V ESD Protection
- RailClamp Dscription RailClamp TVS diods ar ultra low capacitanc dvics dsignd to protct snsitiv lctronics from damag or latch-up du to ESD, EFT, and EOS. Thy ar dsignd for us on high spd ports in applications
More informationAdvanced Power N-CHANNEL ENHANCEMENT MODE Electronics Corp.
dvancd Powr N-CHNNEL ENHNCEMENT MODE Elctronics Corp. POWER MOSFET Low Gat Charg D BV DSS 3V Simpl Driv Rquirmnt R DS(ON) 8mΩ Fast Switching I D 5 G S Dscription P5N3GH/J RoHS-compliant Product TO-252
More informationDTD114GK V CEO I C R. 50V 500mA 10kW. Datasheet. NPN 500mA 50V Digital Transistors (Bias Resistor Built-in Transistors) Outline Parameter Value SMT3
NPN 500mA 50V Digital Transistors (Bias Rsistor Built-in Transistors) Datasht Outlin Paramtr Valu SMT3 V CEO I C R 50V 500mA 10kW Bas Emittr Collctor DTD114GK SOT-346 (SC-59) Faturs 1) Built-In Biasing
More informationAP90T03GH/J RoHS-compliant Product Advanced Power N-CHANNEL ENHANCEMENT MODE Electronics Corp.
P9T3GH/J RoHS-compliant Product dvancd Powr N-CHNNEL ENHNCEMENT MODE Elctronics Corp. POWER MOSFET Lowr On- rsistanc D BV DSS 3V Simpl Driv Rquirmnt R DS(ON) 4mΩ Fast Switching Charactristic G I D 75 S
More informationN-Channel 40 V (D-S) MOSFET
N-Channl 4 V (D-S) MOSFET SUM2N4-m7L PRODUCT SUMMARY V DS (V) R DS(on) (Ω) MAX. I D (A) d Q g (TYP.) 4.7 at V GS = V 2.2 at V GS = 4.5 V 2 TO-263 Top Viw S D G 9 Ordring Information: SUM2N4-m7L-GE3 (Lad
More informationV OUT 3.3V. V REF =V OUT -V ADJ =1.25V (typ.) V OUT =V REF x (1+RF2/RF1)+ I ADJ x RF2 I ADJ =55µA (typ.)
5A Low Dropout Positiv Rgulator FEATURES Dropout Voltag.V at 5A Output Currnt. Fast Transint Rspons. Extrmly Tight Lin and Load Rgulation. Currnt Limiting and Thrmal Protction. Adjustabl Output Voltag
More informationSGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch
GERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/doublethrow (SPDT) CMOS video analog switch (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer
More informationPI5A121/PI5A122/PI5A124
es Features Single-Supply Operation (+V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ. with 5V supply) Minimizes Distortion and Error Voltages On-Resistance Flatness, Ω typ.
More informationVIN AIC C OUT GND C IN. Low Dropout Linear Regulator
00m ow ropout inar Rgulator FTURS ow ropout Voltag of 470mV at 00m Output Currnt (.0V Output Vrsion). Guarantd 00m Output Currnt. ow Ground Currnt at 55µ. 2% ccuracy Output Voltag of 1.8V/ 2.0V /2.5V /2.7V/.0V/.V/.5V/.7V/.8V/
More informationAP85T03GH/J RoHS-compliant Product Advanced Power N-CHANNEL ENHANCEMENT MODE Electronics Corp.
P85T3GH/J RoHS-compliant Product dvancd Powr N-CHNNEL ENHNCEMENT MODE Elctronics Corp. POWER MOSFET Low Gat Charg D BV DSS 3V Simpl Driv Rquirmnt R DS(ON) 6mΩ Fast Switching G I D 75 S Dscription Th TO-252
More informationPackage: H: TO-252 P: TO-220 S: TO-263. Output Voltage : Blank = Adj 12 = 1.2V 15 = 1.5V 18 = 1.8V 25 = 2.5V 33 = 3.3V 50 = 5.0V 3.3V/3A.
Faturs Advancd Powr 3-Trminal ustabl or Fixd.V,.5V,.8V,.5V, 3.3V or 5.V Output Maximum Dropout.4V at Full Load Currnt Fast Transint Rspons Built-in Thrmal Shutdown Output Currnt Limiting Good Nois Rjction
More informationSGM48754 Quad SPST CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage
More informationSPX mA Low Drop Out Voltage Regulator with Shutdown FEATURES Output 3.3V, 5.0V, at 400mA Output Very Low Quiescent Current Low Dropout Voltage
400mA Low Drop Out Voltag Rgulator with Shutdown FEATURES Output 3.3V, 5.0V, at 400mA Output Vry Low Quiscnt Currnt Low Dropout Voltag Extrmly Tight Load and Lin Rgulation Vry Low Tmpratur Cofficint Currnt
More informationUltra-Fast ECL-Output Comparator with Latch Enable MAX9685. Features
19-239; Rv 1; 7/93 Ultra-Fast -Output omparator with atch nabl Gnral scription Th 965 is an ultra-fast comparator manufacturd with a high-frquncy bipolar procss (ft = 6GHz) capabl of vry short propagation
More informationLow-Voltage, High-Speed, Quad, SPST CMOS Analog Switches
9-5; Rev ; 7/99 Low-Voltage, High-Speed, Quad, SPST General Description The quad, low-voltage, high-speed, single-pole/single-throw (SPST) analog switches are pin compatible with the industry-standard
More informationFSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation
December 2013 FSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation Features Low I CC When the S Input is Lower Than V CC Power-Off Isolation (V CC=0 V) 1 Ω On Resistance (R ON) for 4.5 V
More informationSGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch
GENERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/ double-throw (SPDT) CMOS video analog switch (Mux/ DeMux) designed to operate from a single 2.7V to 5.5V power supply. This 2-channel
More informationSGM mW Differential Input, Stereo Audio Power Amplifier
SGM482 2mW Differential Input, GENERAL DESCRIPTION The SGM482 is a stereo audio power amplifier with differential inputs. Operating on a single 5V power supply, it delivers 2mW of continuous RMS power
More informationPI5A4684. Chip Scale Packaging, Dual SPDT Analog Switch. Features. Description. Pin Configuration/ Block Diagram (top view) CSP.
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.5Ω. Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5V min. High Off Isolation:
More informationAnalog Integrations Corporation 4F, 9 Industry E. 9th Rd, Science-Based Industrial Park, Hsinchu, Taiwan DS-385B
Adjustabl Micropowr Voltag Rfrnc FEATURES Adjustabl from.v to.v. Oprating urrnt from µa to ma. Low Tmpratur officint. % and % Initial Tolranc. Low Dynamic Impdanc. APPLIATIONS Portabl, BattryPowrd Equipmnt.
More informationUM Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN General Description. Applications
0.5Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN10 1.8 1.4 General Description The UM5223 is a low on-resistance (R ON ), dual single-pole/double-throw (SPDT) analog switch operates from
More informationEVALUATION KIT AVAILABLE 5.0Gbps PCI Express Passive Switches
19-77; Rev 2; 5/9 EVALUATION KIT AVAILABLE 5.Gbps PCI Express Passive Switches General Description The high-speed passive switches route PCI Express (PCIe) data between two possible destinations. The MAX4888A
More informationMultiplexers/Switches
EVALUATION KIT AVAILABLE / General Description The / are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer () and a double-pole/double-throw (DPDT) switch
More informationUS6H23 / IMH23 V CEO 20V V EBO 12V. 600mA R k. Datasheet. Outline Parameter Tr1 and Tr2 TUMT6 SMT6
NPN 600m 20V Digital Transistors (Bias Rsistor Built-in Transistors) For Muting. Datasht Outlin Paramtr Tr1 and Tr2 TUMT6 SMT6 V CO 20V V BO 12V I C 600m R US6H23 1 4.7k IMH23 SOT-457 (SC-74) Faturs 1)
More informationYB mA, Low Power, High PSRR LDO Regulator
scription Th is a sris of ultra-low-nois, high PSRR, and low quiscnt currnt low dropout (O) linar rgulators with 2.0% output voltag accuracy. Th rgulators achiv a low 300m dropout at 300m load currnt of
More informationHigh Speed, Low Voltage, Dual, DPDT Analog Switch
High Speed, Low Voltage, Dual, DPDT Analog Switch General Description UM QFN16 3.0 3.0 UMA QFN16 2.6 1.8 The UM/A is a high speed, dual, dual-pole/double-throw (DPDT) analog switch operates from a single
More informationP-Channel 150-V (D-S) MOSFET
Si3437V P-Channl 50-V (-S) MOSFET PROUCT SUMMARY V S (V) R S(on) (Ω) I (A) a Q g (Typ.) - 50 0.75 at V GS = - 0 V -.4 0.79 at V GS = - 6 V -.3 TSOP-6 Top Viw 8 nc FEATURES Halogn-fr According to IEC 649--
More informationN-Channel Depletion-Mode Vertical DMOS FET in Single and Dual Options. 14-Lead QFN* 5.00x5.00mm body 1.00mm height (max) 1.
Suprtx inc. Faturs Vry low gat thrshold voltag Dsignd to b sourc-drivn Low switching losss Low ffctiv output capacitanc Dsignd for inductiv loads Wll matchd for low scond harmonic whn drivn by Suprtx M30
More information2SA1579 / 2SA1514K. V CEO -120V -50mA I C. Datasheet. PNP -50mA -120V High-Voltage Amplifier Transistors. Outline
PNP -50mA 20V High-Voltag Amplifir Transistors Datasht Paramtr Valu V CEO 20V -50mA I C Outlin UMT3 SMT3 Collctor Bas Bas Emittr Emittr Collctor Faturs 1) High Brakdown Voltag (BV CEO = 20V) 2) Complmntary
More informationAdvanced Power N-CHANNEL ENHANCEMENT MODE Electronics Corp.
dvancd Powr N-CHNNEL ENHNCEMENT MOE Elctronics Corp. POWER MOSFET Low On-rsistanc BV SS 4V Singl riv Rquirmnt R S(ON) mω Surfac Mount Packag I 32 scription dvancd Powr MOSFETs from PEC provid th dsignr
More informationHigh Speed, Low Voltage, Dual, DPDT Analog Switch
High Speed, Low Voltage, Dual, DPDT Analog Switch General Description UM QF 3.0 3.0 UMA QF 2.6 1.8 The UM/A is a high speed, dual, dual-pole/double-throw (DPDT) analog switch operates from a single +1.8V
More informationAIC1680. Ultra Low Power Voltage Detector FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION CIRCUIT
Ultra Low Powr Voltag Dtctor FEATURES Ultra-Low Quiscnt Currnt..V to 0.0V Input Voltag Opration. Flxibl Dtction Voltag Stting 0.V Stp in th Rang of.v to.0v High Dtction Voltag Accuracy at ±.%. Built-In
More informationUMH8N / IMH8A V CEO I C R 1. 50V 100mA 10k. Datasheet. Outline. Inner circuit
NPN 100m 50V Complx Digital Transistors (Bias Rsistor Built-in Transistors) Datasht Outlin Paramtr V CO I C Tr1 and Tr2 50V 100m 10k UMT6 UMH8N SOT-363 (SC-88) SMT6 IMH8 SOT-457 (SC-74) Faturs 1) Built-In
More information20Ω, 300MHz Bandwidth, Dual SPDT Analog Switch in UCSP
9-2626; Rev ; /2 2, 3MHz Bandwidth, Dual SPDT Analog General Description The low-voltage, low on-resistance (R ON ), dual single-pole/double throw (SPDT) analog switch operates from a single +.8V to +5.5V
More informationSGM9203 Triple, 6th-Order, Video Filter Driver for SD/PS/HD (1080i)/HD (1080p)
SGM923 for SD/PS/HD (18i)/HD (18p) PRODUCT DESCRIPTION The SGM923 is a comprehensive filtering solution designed to give designers the flexibility to easily filter and drive various video signals, including
More informationAOZ8904 Ultra-Low Capacitance TVS Diode Array
Ultra-Low Capacitanc TS Diod Array Gnral Dscription Th AOZ8904 is a transint voltag supprssor array dsignd to protct high spd data lins from lctro Static Discharg (SD) and lightning. This dvic incorporats
More informationN-Channel 40-V (D-S) MOSFET
Si4456Y N-Channl 4-V (-S) MOSFET PROUCT SUMMARY V S (V) R S(on) (Ω) I (A) a Q g (Typ.).38 at V GS = V 33 4 37.5 nc.45 at V GS = 4.5 V 3 FEATURES Halogn-fr According to IEC 6249-2-2 Availabl TrnchFET Gn
More information3A High Current, Low Dropout Voltage Regulator
SPX29300/01/02/03 3 High Currnt, Low Dropout Voltag Rgulator djustabl & Fixd Output, Fast Rspons Tim FETURES djustabl Output Down To 1.25V 1% Output ccuracy Output Currnt of 3 Low Dropout Voltag of 450mV
More informationMAX4680CWE. Pin Configurations/Functional Diagrams/Truth Tables N01 N.C. COM1 V- MAX4690 COM2 IN2 N.C. NO2 SSOP/SO/DIP SWITCH 2 ON OFF 1 OFF
19-1513; Rev ; 7/99 General Description The dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to.3ω max and is flat (.3Ω max) over the specified signal
More informationSwitches- and Indicators. Switches Unlimited Contact: Phone: * Fax:
Switchs- and Indicators Switchs Unlimitd Contact: sals@switchsunlimitd.com Phon: 800-221-0487 * Fax: 718-672-6370 www.switchsunlimitd.com Contnts Dscription... 3 Product Assmbly... 4 PCB Pushbuttons...
More informationFEATURES DG2538, MSOP-10 V+ 1 V+ COM 1. Top View. Temperature Range Package Part Number
Dual SPST Switches DG, DG8, DG9 DESCRIPTION The DG, DG8, and DG9 are low voltage, precision dual SPST switches that can be operated in a single supply or in a dual supply configuration power supply with
More information16-Channel CMOS Analog Multiplexer. Memory
306 16-Channel CMOS Analog Multiplexer FEATURES: RAD-PAK technology radiation-hardened against natural space radiation Total dose hardness: - > 50 Krad (Si), depending upon space mission Excellent Single
More informationEMA5 / UMA5N / FMA5A. V CC -50V -100mA 2.2kW 47kW I C(MAX.) R 1 R 2. Datasheet
M5 / UM5N / FM5 PNP -100m -50V Complx Digital Transistors (Bias Rsistor Built-in Transistors) Datasht Faturs Paramtr V CC -50V -100m 2.2kW 47kW I C(MX.) R 1 R 2 1) Built-In Biasing Rsistors. 2) Two DT123J
More informationMAX4723EUA -40 C to +85 C 8 µmax MAX4722 MAX4723. Pin Configurations/Functional Diagrams/Truth Tables C NC1 IN1 UCSP. Maxim Integrated Products 1
9-2632; Rev ; /2 4.5Ω Dual SPST Analog Switches in UCSP General Description The MAX472/MAX4722/ low-voltage, low onresistance (R ON ), dual single-pole/single throw (SPST) analog switches operate from
More informationLNA IN GND GND GND GND IF OUT+ IF OUT- 7. Product Description. Ordering Information. GaAs HBT GaAs MESFET InGaP HBT
LOW NOISE AMPLIFIER/ RoHS Compliant & Pb-Fr Product Packag Styl: SOIC- Faturs Singl V to.v Powr Supply MHz to MHz Opration db Small Signal Gain.dB Cascadd Nois Figur.mA DC Currnt Consumption -dbm Input
More information0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches
19-116; Rev ; 1/6.Ω, Low-Voltage, Single-Supply Dual SPST General Description The are low on-resistance, low-voltage, dual single-pole/single-throw (SPST) analog switches that operate from a single +1.6V
More informationFEATURES BENEFITS APPLICATIONS. PARAMETER LIMIT UNIT Reference to GND V to +6 IN, COM, NC, NO a -0.3 to (V )
DESCRIPTION www.vishay.com.5, High Bandwidth, Dual SPDT Analog Switch The DGE is a low-voltage dual single-pole / double-throw monolithic CMOS analog switch. Designed to operate from. V to 5.5 V power
More informationPin Configurations/Functional Diagrams/Truth Table COM COM GND MAX4644 OFF OFF. Maxim Integrated Products 1
9-7; Rev ; 3/ High-Speed, Low-Voltage, 4Ω, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.8V to +.V. It provides low 4Ω on-resistance
More informationTOP VIEW COUT1 COM2. Maxim Integrated Products 1
19-77; Rev ; 7/4.75Ω, Dual SPDT Audio Switch with General Description The dual, single-pole/double-throw (SPDT) switch operates from a single +2V to +5.5V supply and features rail-to-rail signal handling.
More informationTOP VIEW COM2. Maxim Integrated Products 1
19-3472; Rev ; 1/4 Quad SPST Switches General Description The quad single-pole/single-throw (SPST) switch operates from a single +2V to +5.5V supply and can handle signals greater than the supply rail.
More informationMAX14585/MAX14585A Hi-Speed USB and Audio Switches with Negative Signal Capability and High-Voltage-Tolerable VBUS Detection
19-5878; Rev ; 5/11 E V A L U A T I O N K I T A V A I L A B L E /A General Description The /A high-esd-protected doublepole/double-throw (DPDT) switches multiplex Hi-Speed (48Mbps) USB and analog signals
More information5Ω, Quad, SPST, CMOS Analog Switches
9-393; Rev ; 8/99 5Ω, Quad, SPST, CMOS Analog Switches General Description The quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to.5ω max and is flat (.5Ω max)
More informationAME. 1-Ohm Low Voltage SPDT Analog Switch AME4620. Functional Block Diagram. General Description. Features. Applications
4620 General Description The 4620 analog switches feature low ON resistance, single-pole, double-throw (SPDT) with wide operating single power supply voltage range, from 1.8V to 5.5V. Functional Block
More informationDTA123E series V CC I C(MAX.) R 1 R 2. 50V 100mA 2.2k 2.2k. Datasheet. PNP -100mA -50V Digital Transistors (Bias Resistor Built-in Transistors)
DT123 sris PNP -100m -50V Digital Transistors (Bias Rsistor Built-in Transistors) Datasht Paramtr V CC I C(MX.) R 1 R 2 Valu 50V 100m 2.2k 2.2k Faturs 1) Built-In Biasing Rsistors, R 1 = R 2 = 2.2k. Outlin
More informationP-Channel 200-V (D-S) MOSFET
Si79DN P-Channl -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) Q g (Typ.) -.5 at V GS = - V -.8.6 nc. at V GS = - 6.V -.6 PowrPAK -8 FEATURES Halogn-fr According to IEC 69-- Availabl TrnchFET
More informationSGM W Audio Power Amplifier with Shutdown Mode
SGM487 GENERAL DESCRIPTION The SGM487 is a mono bridged audio power amplifier that is designed for portable communication device applications and demanding applications in mobile phones. SGM487YPS8 is
More informationFSA Ω Low-Voltage Dual DPDT Analog Switch
March 2013 FSA2467 0.4Ω Low-Voltage Dual DPDT Analog Switch Features Typical 0.4 On Resistance (R ON ) for +2.7V Supply Features Less then12µa ICCT Current when Sn Input is Lower than V CC 0.25 Maximum
More information3110(A) SGM3110 MicroPower Regulated Charge Pump FEATURES GENERAL DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS TYPICAL APPLICATION
GENERAL DESCRIPTION The SGM30 is a MicroPower switched capacitor voltage converter that delivers a regulated output. No external inductor is required for operation. The SGM30 can deliver up to 00mA to
More informationMAX4661CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NC2 V- NO2 MAX4662 NO3 COM3 IN3 SSOP/SO/DIP MAX4662 LOGIC SWITCH OFF
9-56; Rev ; 7/99 General Description The // quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat (.5Ω max) over the specified signal
More informationSGM W Fully Differential Audio Power Amplifier with Selectable Shutdown
GENERAL DESCRIPTION The SGM4996 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile phones. It is capable
More information