SGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode
|
|
- Abel Webb
- 5 years ago
- Views:
Transcription
1 Dual 58mW Headphone Amplifier GENERAL DESCRIPTION The SGM4809 is a dual audio power amplifier capable of delivering 58mW per channel of continuous average power with less than 0.% distortion(thd N)when it drives a 6Ω speaker from a 5.0V power supply. It is designed to maximize audio performance in portable applications such as mobile phone. The portable application requires audio power amplifier has minimum of external components and can operate from a single 2.5V to 5.5V power supply. SGM4809 features an externally controlled, active-low, micropower consumption shutdown mode, as well as an internal thermal shutdown protection mechanism. FEATURES Active-Low Shutdown Mode 58mW into 6Ω Load from 5V Power Supply at THDN = 0.% Typical (per Channel) 87mW into 32Ω Load from 5V Power Supply at THDN = 0.% Typical (per Channel) Unity Gain Stable Shutdown Current: 0.6µA (TYP) 2.5V to 5.5V Operation Shutdown Pin is Compatible with.8v Logic Click and Pop Reduction Circuitry -40 to 85 Operating Temperature Range Pb-Free MSOP-8 Package SGM4809 does not require bootstrap capacitors or snubber networks. It is optimally suited for low-power portable systems. For maximum flexibility, the SGM4809 provides an externally controlled gain (with resistors), as well as an externally controlled turn-on time (with the bypass capacitor). The SGM4809 is available in Pb-free MSOP-8 package. It operates over an ambient temperature range of -40 to 85. APPLICATIONS Portable Systems Headphone Amplifier Microphone Preamplifier Notebook Computers Mobile Phone PDAs GPS REV. A
2 Dual 58mW Headphone Amplifier PACKAGE/ORDERING INFORMATION PACKAGE PACKAGE MARKING MODEL ORDER NUMBER DESCRIPTION OPTION INFORMATION SGM4809 SGM4809YMS/TR MSOP-8 Tape and Reel, 3000 SGM4809YMS PIN CONFIGURATION (Top View) ABSOLUTE MAXIMUM RATINGS V O SGM4809YMS 8 V Supply Voltage... 6V Input Voltage. -0.3V to (V ) 0.3V Storage Temperature Range to 50 Junction Temperature..50 V IN Bypass GND V O2 V IN2 SHDN Operating Temperature Range to 85 Lead Temperature Range (Soldering 0 sec) ESD Susceptibility HBM... 4KV MM V CAUTION MSOP-8 This integrated circuit can be damaged by ESD if you don t pay attention to ESD protection. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. NOTES. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2
3 Dual 58mW Headphone Amplifier ELECTRICAL CHARACTERISTICS: T A = 25 C PARAMETER SYMBOL CONDITIONS SGM4809 MIN TYP MAX Supply Voltage V V Shutdown Current Output Offset Voltage Quiescent Power Supply Current I SD V OS I Q V IN = 0V, V SHDN = GND, V = 5.0V V IN = 0V, V SHDN = GND, V = 3.3V 0.8 V IN = 0V, V SHDN = GND, V = 2.6V 0. V IN = 0V, V SHDN = V = 5.0V V IN = 0V, V SHDN = V = 3.3V V IN = 0V, V SHDN = V = 2.6V V IN = 0V, V SHDN = V V = 5.0V, No Load V = 3.3V, No Load.72 V = 2.6V, No Load.65 Shutdown Voltage Input High V SDIH.8 V Shutdown Voltage Input Low V SDIL 0.4 V Output Power (per Channel) Total Harmonic Distortion Noise P O THDN f = khz THDN = 0.% V = 5.0V V = 3.6V V = 3.0V V = 2.6V P O = 78mW, V = 5.0V, R L = 32Ω, f = 20Hz to 20kHz R L = 6Ω 58 R L = 32Ω 87 R L = 6Ω 84 R L = 32Ω 47 R L = 6Ω 58 R L = 32Ω 33 R L = 6Ω 42 R L = 32Ω 25 UNITS µa mv ma mw 0.3 % Crosstalk X talk R L = 32Ω, P O = 70mW, V = 5V, f = khz -00 db Power Supply Rejection Ratio PSRR Specifications subject to changes without notice. f = 27Hz f = khz V = 5.0V -62 V = 3.6V -62 V = 3.0V -62 V = 2.6V -62 V = 5.0V -7 V = 3.6V -7 V = 3.0V -7 V = 2.6V -7 db 3
4 Dual 58mW Headphone Amplifier TYPICAL APPLICATION R F V C S µf C I 0.47µF R I V IN Audio Input V IH V IL Shutdown Control SHDN BIAS V _ C 0 V O 00µF R L 32Ω C B.0 µf Bypass Audio Input C I 0.47µF R I V IN2 _ V O2 C 0 00µF R L 32Ω GND R F 4
5 Dual 58mW Headphone Amplifier TYPICAL PERFORMANCE CHARACTERISTICS Large Signal Step Response Small Signal Step Response Output Voltage (500mV/div) V = 3V Output Voltage (50mV/div) V = 3V Time (2µs/div) Time (0.5µs/div) Large Signal Step Response Small Signal Step Response Output Voltage (500mV/div) V = 5V Output Voltage (50mV/div) V = 5V Time (2µs/div) Time (µs/div) Small Signal Frequency Response Small Signal Frequency Response Normalized Gain (db) V = 3V, R L = 32Ω, V IN = -0dBm Normalized Gain (db) V = 5V, R L = 32Ω, V IN = -0dBm Frequency (MHz) Frequency (MHz) 5
6 Dual 58mW Headphone Amplifier TYPICAL PERFORMANCE CHARACTERISTICS THDN vs. Output Power per Channel THDN vs. Output Power per Channel 0 V = 5V, R L = 32Ω, f = khz, A V = -, BW < 80kHz 0 V = 3V, R L = 32Ω, f = khz, A V = -, BW < 80kHz THDN (%) THDN (%) Output Power (W) Output Power (W) THDN vs. Output Power per Channel THDN vs. Output Power per Channel 0 V = 5V, R L = 6Ω, f = khz, A V = -, BW < 80kHz 0 V = 3V, R L = 6Ω, f = khz, A V = -, BW < 80kHz THDN (%) 0. THDN (%) Output Power (W) Output Power (W) THDN vs. Frequency THDN vs. Frequency THDN (%) V = 5V, R L = 32Ω, P O = 80mW THDN (%) V = 3V, R L = 32Ω, P O = 25mW Frequency (khz) Frequency (khz) 6
7 TYPICAL PERFORMANCE CHARACTERISTICS Dual 58mW Headphone Amplifier Supply Current (ma) Supply Current vs. Supply Voltage V IN = 0V No Load Supply Voltage (V) Dropout Voltage (mv) Dropout Voltage vs. Supply Voltage Ω, TOP Ω, BOTTOM Ω,TOP Ω, BOTTOM Supply Voltage (V) 7
8 Dual 58mW Headphone Amplifier PACKAGE OUTLINE DIMENSIONS MSOP-8 b C L Symbol Dimensions In Millimeters Dimensions In Inches E E Min Max Min Max A A A b 0.30 TYP 0.02 TYP e A θ A2 A C 0.5 TYP TYP D e 0.65 TYP TYP E E L θ D 04/2008 REV. A SGMICRO is dedicated to provide high quality and high performance analog IC products to customers. All SGMICRO products meet the highest industry standards with strict and comprehensive test and quality control systems to achieve world-class consistency and reliability. For information regarding SGMICRO Corporation and its products, see 8
SGM mW Differential Input, Stereo Audio Power Amplifier
SGM482 2mW Differential Input, GENERAL DESCRIPTION The SGM482 is a stereo audio power amplifier with differential inputs. Operating on a single 5V power supply, it delivers 2mW of continuous RMS power
More informationSGM W Audio Power Amplifier
GENERAL DESCRIPTION The SGM489 is a.2w, fully integrated, audio power amplifier. It is designed to maximize audio performance in portable applications such as mobile phone. The portable application requires
More informationSGM W Audio Power Amplifier with Shutdown Mode
SGM487 GENERAL DESCRIPTION The SGM487 is a mono bridged audio power amplifier that is designed for portable communication device applications and demanding applications in mobile phones. SGM487YPS8 is
More informationSGM W Fully Differential Audio Power Amplifier with Selectable Shutdown
GENERAL DESCRIPTION The SGM4996 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile phones. It is capable
More informationSGM W Fully Differential Audio Power Amplifier
.3W Fully Differential GENERAL DESCRIPTION The SGM4895 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile
More informationSGM W Mono Fully Differential Audio Power Amplifier
.3W Mono Fully Differential GENERAL DESCRIPTION The SGM4995 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile
More informationSGM Watt Audio Power Amplifier GENERAL DESCRIPTION FEATURES. PIN CONFIGURATIONS (Top View) APPLICATIONS
. Watt Audio Power Amplifier GENERAL DESCRIPTION The is a.-w, fully integrated, audio power amplifier. It is designed to maximize audio performance in portable applications such as mobile phone. The portable
More informationSGM4863 Dual 2.1W Audio Power Amplifier Plus Stereo Headphone Function
Dual.W Audio Power Amplifier GENERAL DESCRIPTION The SGM4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver.w into a 4Ω load or.5w into a 3Ω load with
More information3110(A) SGM3110 MicroPower Regulated Charge Pump FEATURES GENERAL DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS TYPICAL APPLICATION
GENERAL DESCRIPTION The SGM30 is a MicroPower switched capacitor voltage converter that delivers a regulated output. No external inductor is required for operation. The SGM30 can deliver up to 00mA to
More informationSGM2025 Quad, Low Power, Low Dropout, 200mA, RF-Linear Regulators
GENERAL DESCRIPTION The SGM2025 is a quad, low-power, low-dropout, CMOS linear voltage regulator that operates from 3.3V to 5.5V input and delivers up to 200mA continuous current at each channel. An ultra
More informationSGM mW, Capless, Stereo Headphone Amplifier with Shutdown
8mW, Capless, Stereo Headphone GENERAL DESCRIPTION The SGM497 stereo headphone amplifier is designed for portable equipment where board space is at a premium. The SGM497 uses capless architecture to produce
More informationSGM mW, Capless, Stereo Headphone Amplifier with Shutdown
GENERAL DESCRIPTION The SGM4914 stereo headphone amplifier is designed for portable equipment where board space is at a premium. The SGM4914 uses capless architecture to produce a ground-referenced output
More informationSGM3127 White LED Driver with Low Dropout Current Source
GENERAL DESCRIPTION The SGM3127 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. It is optimized for low
More informationSGM3798 Audio Headset Analog Switch with Reduced GND Switch R ON and FM Capability
GENERAL DESCRIPTION The is an audio headset analog switch that is used to detect 3.5mm accessories and switch SLEEVE and RING2 by external controller. The ground signal is routed through a pair of low-impedance
More informationSGM8925/7 110kHz, 6.4μA, Rail-to-Rail Output CMOS Operational Amplifiers
PRODUCT DESCRIPTION The SGM8925 and SGM8927 are low power, low offset voltage and rail-to-rail output voltage feedback amplifiers. They have a wide output voltage swing, and take the minimum operating
More informationSGM3127 White LED Driver with Low Dropout Current Source
GENERAL DESCRIPTION The SGM3127 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. It is optimized for low
More informationSGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
SGM8621/2/3/4 3MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The SGM8621 (single), SGM8622 (dual), SGM8623 (single with shutdown) and SGM8624 (quad) are low noise, low voltage, and low power operational amplifiers,
More informationSGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70
GENERAL DESCRIPTION The SGM3167 is a single, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switches designed to operate from a single 1.8V to 5.5V supply. It features high-bandwidth (600MHz)
More informationSGM MHz, 48μA, Rail-to-Rail I/O CMOS Operational Amplifier
PRODUCT DESCRIPTION The is a low cost, single rail-to-rail input and output voltage feedback amplifier. It has a wide input common mode voltage range and output voltage swing, and takes the minimum operating
More informationSGM321/SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers
/SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers GENERAL DESCRIPTION The (single), SGM358 (dual) and SGM324 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers.
More informationSGM9119 Triple, 5th Order, Standard Definition Video Filter Driver
PRODUCT DESCRIPTION The SGM9119 is a low-voltage, triple video amplifier with integrated reconstruction filter and input clamps. Specially suited for standard definition video signals, this device is ideal
More informationSGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain
PRODUCT DESCRIPTION The SGM9111 is single rail-to-rail 5-pole output reconstruction filter with a -3dB bandwidth of 8MHz and a slew rate of 3.8V/µs. Operating from single supplies ranging from 3.V to 5.5V
More informationA W CLASS AB BTL AUDIO POWER AMPLIFIER EXTERNAL GAIN CONFIGURATION CAPABILITY
DESCRIPTION The is a Class-AB audio power amplifier designed for mobile phones and other portable communication devices. It is capable of delivering 1.28 watts of continuous average power to an 8Ω BTL
More informationSGM8551XN Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier
PRODUCT DESCRIPTION The SGM8551XN is a single rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to
More informationEUA6210 Output Capacitor-less 67mW Stereo Headphone Amplifier
Output Capacitor-less 67mW Stereo Headphone Amplifier DESCRIPTION The is an audio power amplifier primarily designed for headphone applications in portable device applications. It is capable of delivering
More informationSGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM2267 is a dual single-pole/double-throw (SPDT) analog switch that is designed to operate from a single +1.8V to +4.2V power supply. Targeted applications include battery powered
More informationSGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
/2/3 6MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The (single), SGM8632 (dual) and SGM8633 (single with shutdown) are low noise, low voltage, and low power operational amplifiers that can be designed into
More informationSGM8271/2/4 High Voltage Rail-to-Rail Output Operational Amplifiers
GENERAL DESCRIPTION The SGM8271 (single), SGM8272 (dual) and SGM8274 (quad) are high voltage operational amplifiers that are designed to offer a wide input common mode voltage range and output voltage
More informationSGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3003 is a single, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single +1.8V to +5.5V supply. Targeted
More informationSGM mA, High Voltage Regulators
Preliminary Datasheet SGM2203 GENERAL DESCRIPTION The SGM2203 series is a set of low power high voltage regulators implemented in CMOS technology which can provide 150mA output current. The device allows
More informationSGM9116 Triple, 35MHz, 6th Order HDTV Video Filter Driver
PRODUCT DESCRIPTION The SGM911 is a video buffer which integrates triple Gain rail-to-rail output driver and triple th output reconstruction filter, it has 5MHz - bandwidth and 159V/µs slew rate. SGM911
More informationSGM8521/2/4 150kHz, 5.5μA, Rail-to-Rail I/O, CMOS Operational Amplifiers
//4 0kHz,.μA, Rail-to-Rail I/O, GENERAL DESCRIPTION The (single), SGM8 (dual) and SGM84 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode
More informationSGM8631/2/3/4 470μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
PRODUCT DESCRIPTION The SGM863 (single), SGM863 (dual), SGM8633 (single with shutdown) and SGM8634 (quad) are low noise, low voltage, and low power operational amplifiers, that can be designed into a wide
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSGM89000 Capless 2Vrms Line Driver with Adjustable Gain
GENERAL DESCRIPTION The SGM89000 is a 2Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The device is ideal
More informationSGM9119 Triple, 5th Order, Standard Definition Video Filter Driver
PRODUCT DESCRIPTION The SGM9119 is a low-voltage, triple video amplifier with integrated reconstruction filter and input clamps. Specially suited for standard definition video signals, this device is ideal
More informationSGM Ω, Low Voltage Quad, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power
More informationDATA SHEET. Filterless, 2.8W, Mono Class-D Audio Power Amplifier
GK2305LD Filterless, 2.8W, Mono Class-D Audio Power Amplifier General Description ---The GK2305LD is a 2.8W high efficiency, filterless Class-D audio amplifier in a DFN or MSOP package. A filterless PWM
More informationSGM8554 Single-Supply, Quad Rail-to-Rail I/O Precision Operational Amplifier
PRODUCT DESCRIPTION The SGM8554 is a quad rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to 5.5V
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44599 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSGM8584 Single-Supply, Quad Rail-to-Rail I/O Precision Operational Amplifier
PRODUCT DESCRIPTION The SGM8584 is a quad rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to 5.5V
More informationSGM9154 Single Channel, Video Filter Driver for HD (1080p)
PRODUCT DESCRIPTION The SGM9154 video filter is intended to replace passive LC filters and drivers with an integrated device. The 6th-order channel offers High Definition (HDp) filter. The SGM9154 may
More informationSON3130 FEATURES PRODUCT DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS
PRODUCT DESCRIPTION The SON313 is designed for heart rate output with SON133(heart rate sensor) offering low cost. It has a wide input common mode voltage range and output voltage swing, and takes the
More informationSGM9119 Triple, 5th-Order, Standard Definition Video Filter Driver
PRODUCT DESCRIPTION The SGM9119 is a low voltage, triple video amplifier with integrated reconstruction filters and input clamps. Specially suited for standard definition video signals, this device is
More informationSGM3736 PWM Dimming, 38V Step-Up LED Driver
GENERAL DESCRIPTION The SGM3736 is a versatile constant current LED driver with a high efficiency step-up converter architecture. The low-side power MOSFET is integrated in the device, significantly shrinking
More informationSGM9203 Triple, 6th-Order, Video Filter Driver for SD/PS/HD (1080i)/HD (1080p)
SGM923 for SD/PS/HD (18i)/HD (18p) PRODUCT DESCRIPTION The SGM923 is a comprehensive filtering solution designed to give designers the flexibility to easily filter and drive various video signals, including
More informationCE0030A. Audio Power Amplifier with low power supply INTRODUCTION FEATURES PIN DIAGRAM
Audio Power Amplifier with low power supply INTRODUCTION The is a fully differential audio power amplifier designed for portable communication device applications. It is capable of delivering 1 watt of
More information1.2W Audio Power Amplifier with Active-low Standby Mode
1.2W Audio Power Amplifier with Active-low Standby Mode General Description The SN4991 has been designed for demanding audio applications such as mobile phones and permits the reduction of the number of
More informationRT mA Dual LDO Regulator. General Description. Features. Applications. Ordering Information. Pin Configurations (TOP VIEW) Marking Information
RT9055 300mA Dual LDO Regulator General Description The RT9055 is a dual channel, low noise, and low dropout regulator sourcing up to 300mA at each channel. The output voltage range is from 0.9V to 3.5V
More informationSGM8908 Capless 3Vrms Line Driver with Adjustable Gain
GENERAL DESCRIPTION The is a 3Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The device is ideal for single
More information140mW Headphone Amplifier with Unity-gain Stable
140mW Headphone Amplifier with Unity-gain Stable General Description The LPA4809 is a dual audio power amplifier capable of delivering 140mW per channel of continuous average power into a 16Ω load with
More informationSGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain
SGM9111 8MHz Rail-to-Rail Composite GENERAL DESCRIPTION The SGM9111 is a single rail-to-rail -pole output reconstruction filter with a -3dB bandwidth of 8MHz and 3V/µs slew rate. Operating from single
More informationLM4808 Dual 105 mw Headphone Amplifier
Dual 105 mw Headphone Amplifier General Description The is a dual audio power amplifier capable of delivering 105 mw per channel of continuous average power into a16ωload with 0.1% (THD+N) from a 5V power
More informationSGM mA Buck/Boost Charge Pump LED Driver
GENERAL DESCRIPTION The SGM3140 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels for FLASH
More informationIS31AP4066D DUAL 1.3W STEREO AUDIO AMPLIFIER. January 2014 KEY SPECIFICATIONS
DUAL 1.3W STEREO AUDIO AMPLIFIER GENERAL DESCRIPTION The IS31AP4066D is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 1.3W to an 8Ω load. The IS31AP4066D
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD DUAL 2.2W AUDIO AMPLIFIER PLUS STEREO HEADPHONE FUNCTION DESCRIPTION The UTC L4863 is a dual bridge-connected audio power amplifier. It combines dual bridge speaker amplifiers
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationLow-Cost, Mono/Stereo, 1 W Differential Audio Power Amplifiers
Low-Cost, Mono/Stereo, 1 W Differential Audio Power Amplifiers General Description The is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication
More informationSGM V Step-Up LED Driver
GENERAL DESCRIPTION The SGM3725 is a versatile constant current LED driver with a high efficiency step-up converter architecture. Unique technology and high 1.35A current limit allow SGM3725 to drive up
More informationSGM mA Buck/Boost Charge Pump LED Driver
GENERAL DESCRIPTION The SGM3140 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels for Flash
More informationDual 2.2W Audio Power Amplifier Plus Stereo
HWD4863 Dual 2.2W Audio Power Amplifier Plus Stereo Headphone Function General Description --- HWD4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver
More informationSGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.
More informationSGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch
GERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/doublethrow (SPDT) CMOS video analog switch (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer
More informationLM4811 Dual 105mW Headphone Amplifier with Digital Volume Control and Shutdown Mode
LM4811 Dual 105mW Headphone Amplifier with Digital Volume Control and Shutdown Mode General Description Key Specifications The LM4811 is a dual audio power amplifier capable of delivering 105mW per channel
More informationSGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
More informationSGM mA, Low Power, Low Dropout, RF Linear Regulators
GENERAL DESCRIPTION The SGM236 series low-power, low-dropout, CMOS linear voltage regulators operate from a 1.6V to 5.5V input voltage and deliver up to 3mA output current. They are the perfect choice
More informationRT9187C. 600mA, Ultra-Low Dropout, CMOS Regulator. General Description. Features. Applications. Ordering Information. Pin Configurations (TOP VIEW)
600mA, Ultra-Low Dropout, CMOS Regulator General Description The is a high-performance, 600mA LDO regulator, offering extremely high PSRR and ultra-low dropout. This chip is ideal for portable RF and wireless
More informationRT9198/A. 300mA, Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Ordering Information RT9198/A- Features. Marking Information
RT9198/A 3mA, Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RT9198/A is designed for portable RF and wireless applications with demanding performance and space requirements. The RT9198/A
More informationSGM89112 Capless 3Vrms Line Driver with 8MHz 5th-Order Video Driver
GENERAL DESCRIPTION The is a 3Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The also has a single rail-to-rail
More informationLow Noise 300mA LDO Regulator General Description. Features
Low Noise 300mA LDO Regulator General Description The id9301 is a 300mA with fixed output voltage options ranging from 1.5V, low dropout and low noise linear regulator with high ripple rejection ratio
More informationLM48820 Ground-Referenced, Ultra Low Noise, Fixed Gain, 95mW Stereo Headphone Amplifier
June 2007 Ground-Referenced, Ultra Low Noise, Fixed Gain, 95mW Stereo Headphone Amplifier General Description The is a ground referenced, fixed-gain audio power amplifier capable of delivering 95mW of
More informationAP4890B --- 1W AUDIO POWER AMPLIFIER
AP4890B --- 1W AUDIO POWER AMPLIFIER 1. DESCRIPTION : The AP4890B is an audio power amplifier designed for portable communication device applications such as mobile phone applications. The AP4890B is capable
More informationSGM2021 Low Power, Low Dropout, Linear Regulators
GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power applications.
More informationLM mw Audio Power Amplifier with Shutdown Mode
LM4862 675 mw Audio Power Amplifier with Shutdown Mode General Description The LM4862 is a bridge-connected audio power amplifier capable of delivering typically 675 mw of continuous average power to an
More informationRT2517B. 1A, 6V, Ultra-Low Dropout Linear Regulator. General Description. Features. Applications. Ordering Information. Marking Information
RT2517B 1A, 6V, Ultra-Low Dropout Linear Regulator General Description The RT2517B is a high performance positive voltage regulator designed for use in applications requiring ultralow input voltage and
More informationRT μA I Q, 250mA Low-Dropout Linear Regulator. General Description. Features
RT9073 1μA I Q, 250mA Low-Dropout Linear Regulator General Description The RT9073 is a low-dropout (LDO) voltage regulators with enable function that operates from 1.2V to 5.5V. It provides up to 250mA
More informationSGM8140 Low Power, Vibration Sensor and PIR Sensor Analog Front End (AFE)
SGM814 PRODUCT DESCRIPTION The SGM814 is a PIR sensor and vibration sensor analog front end which consists of 2 independent building block circuits. One is a dual rail-to-rail input and output operational
More informationSGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DESCRIPTION The SGM7222 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. SGM7222 is designed for the switching of
More informationMono 1.9W / Stereo 300mW Power Amplifier Low Voltage Operation, Shutdown Function
Low Voltage Operation, Shutdown Function FEATURES Operation range:.4v ~ 6.5V Shutdown Current 8uA at 5V Output power, THDN=% BTL, R L =3Ω,.W at 5V BTL, R L =4Ω,.9W at 5V, 0.83W at 3.3V, 500mW at.7v BTL,
More informationRT9041A/B. 500mA, Low Voltage, LDO Regulator with External Bias Supply. General Description. Features. Applications. Ordering Information
RT9041A/B 500mA, Low Voltage, LDO Regulator with External Bias Supply General Description The RT9041A/B are low voltage, low dropout linear regulators with an external bias supply input. The bias supply
More informationRT A, Ultra-Low Dropout Voltage Regulator. General Description. Features. Applications. Pin Configurations. Ordering Information RT9059(- )
RT9059 3A, Ultra-Low Dropout Voltage Regulator General Description The RT9059 is a high performance positive voltage regulator designed for use in applications requiring very low input voltage and very
More informationSGM8957-1/SGM V, Micro-Power CMOS Zero-Drift Operational Amplifiers
/SGM8957-2 1.8V, Micro-Power CMOS PRODUCT DESCRIPTION The single and dual SGM8957-2 CMOS operational amplifiers provide very low offset voltage and zero-drift over time and temperature. The miniature,
More informationRT2517B. 1A, 6V, Ultra-Low Dropout Linear Regulator. Features. General Description. Applications. Ordering Information. Marking Information
Sample & Buy 1A, 6V, Ultra-Low Dropout Linear Regulator General Description The is a high performance positive voltage regulator designed for use in applications requiring ultralow input voltage and ultra-low
More informationSGM Channel PWM Dimming Charge Pump White LED Driver
GENERAL DESCRIPTION The SGM3145 is a high performance white LED driver. It integrates current sources and automatic mode selection charge pump. The part maintains the high efficiency by utilizing a 1 /1.5
More informationRT9187B. 600mA, Ultra-Low Dropout, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information RT9187B
6mA, Ultra-Low Dropout, Ultra-Fast CMOS LDO Regulator General Description The is a high-performance, 6mA LDO regulator, offering extremely high PSRR and ultra-low dropout. This chip is ideal for portable
More information2.95W Mono Filter-less Class-D Audio Power Amplifier
.95W Mono Filter-less Class-D Audio Power Amplifier General Description The SN005 is a high efficiency,.95w mono Class-D audio power amplifier. A low noise, filter-less PWM architecture eliminates the
More informationConstant Voltage and Constant Current Controller. Features
09/06/2011 Constant Voltage and Constant Current Controller Rev. P1 General Description Features The is built-in with a high-accuracy 1.2V voltage reference, two op-amps and a low-side current sensing
More informationSGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch
GENERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/ double-throw (SPDT) CMOS video analog switch (Mux/ DeMux) designed to operate from a single 2.7V to 5.5V power supply. This 2-channel
More informationAF Watt CLASS-AB Audio Power Amplifier 1 / 11. Features. General Description. Applications AF-V3.0. Analog Future. Package Information
1 Watt CLASS-AB Audio Power Amplifier Features PSRR at 217Hz, VDD = 5V (Fig. 1) 62dB(typ.) Power Output at 5.0V & 1% THD 1W(typ.) Power Output at 3.3V & 1% THD 400mW(typ.) Shutdown Current 0.1μA(typ.)
More informationLM Watt Audio Power Amplifier with Fade-In and Fade-Out
1.1 Watt Audio Power Amplifier with Fade-In and Fade-Out General Description The is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication
More informationSGM MHz, Triple, 6dB Video Driver
PRODUCT DESCRIPTION The SGM9117 includes triple high-speed video buffers with G = +2 in one package. Every video buffer has -db full signal bandwidth in excess of 2MHz, along with slew rates in excess
More informationUNISONIC TECHNOLOGIES CO., LTD M4670 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD M4670 Preliminary CMOS IC FITERLESS HIGH EFFICIENCY 3W SWITCHING AUDIO AMPLIFIER DESCRIPTION The M4670 is a fully integrated single-supply, high-efficiency Class D switching
More informationRT mA, Low Input Voltage, Low Dropout, Low Noise Ultra- Fast Without Bypass Capacitor CMOS LDO Regulator. General Description.
RT9030 150mA, Low Input Voltage, Low Dropout, Low Noise Ultra- Fast Without Bypass Capacitor CMOS LDO Regulator General Description The RT9030 is a high-performance, 150mA LDO regulator, offering extremely
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4461 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationRT2515A. 2A, Low Input Voltage, Ultra-Low Dropout Linear Regulator with Enable. General Description. Features. Applications
2A, Low Input Voltage, Ultra-Low Dropout Linear Regulator with Enable General Description The is a high performance positive voltage regulator designed for use in applications requiring ultralow input
More informationIS31AP W AUDIO POWER AMPLIFIER WITH ACTIVE-HIGH STANDBY MODE. August 2013
.W AUDIO POWER AMPLIFIER WITH ACTIVE-HIGH STANDBY MODE August 03 GENERAL DESCRIPTION The IS3AP4996 has been designed for demanding audio applications such as mobile phones and permits the reduction of
More informationRT mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information
3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RT9193 is designed for portable RF and wireless applications with demanding performance and space requirements. The RT9193 performance
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM4862 675 mw Audio Power Amplifier with Shutdown Mode General Description
More informationSGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator
150ns, Low-Power, 3V/5V, Rail-to-Rail GENERAL DESCRIPTION The is a single high-speed comparator optimized for systems powered from a 3V or 5V supply. The device features high-speed response, low-power
More informationRT mA, Low Input Voltage, Low Dropout, Low Noise Ultra- Fast Without Bypass Capacitor CMOS LDO Regulator. General Description.
Applications CDMA/GSM Cellular Handsets Portable Information Appliances Laptop, Palmtops, Notebook Computers Hand-Held Instruments Mini PCI & PCI-Express Cards PCMCIA & New Cards RT9030 150mA, Low Input
More information