Pin Configuration T Package (TO-220-) S/SA Package (TO-26-) S SA 2 1 GND 2 1 GND 2 1 GND DA Package (TO-252-2(1)) (TO-252-2(2)) 2 GND 2 GND 1 1 (TO-25

Transcription

1 General Description The AZ9150 is low dropout three-terminal regulator with a typical dropout of 75mV at 1.5A output current. The AZ9150 provides current limit and thermal shutdown. On-chip thermal shutdown provides protection against any combination of high current and ambient temperature that would create excessive junction temperatures. The AZ9150 is available for.v, 5.0V and 12V versions now. It is available in the industry standard TO- 220-, TO-26-, TO-252-2(1), TO-252-2(2), TO () and TO-252-2(4) power packages. Features Minimum Guaranteed Output Current: 1.5A Dropout Voltage: 75mV at I OUT =1.5A Output Accuracy: 1% Low Ground Current Internal Current Limit and Thermal Protection Reversed-battery and Reversed-lead Insertion Protection Fast Transient Response Applications LCD TV Set Top Box LCD Monitor SMPS Post Regulator Laptop, Palmtop and Notebook Portable Instrumentation USB Power Supply TO-220- TO-26- TO-252-2(1) TO-252-2(2) TO-252-2() TO-252-2(4) Figure 1. Package Types of AZ9150 1

2 Pin Configuration T Package (TO-220-) S/SA Package (TO-26-) S SA 2 1 GND 2 1 GND 2 1 GND DA Package (TO-252-2(1)) (TO-252-2(2)) 2 GND 2 GND 1 1 (TO-252-2()) (TO-252-2(4)) 2 GND 2 GND 1 1 Pin Description Figure 2. Pin Configuration of AZ9150 (Top View) TO-220-/TO-26-(S) TO-252-2(1)/(2)/()/(4) Pin Number TO-26-(SA) Pin Name 1 Unregulated input. Function 2 1 GND The ground pin. This pin and TAB are internally connected. 2 Regulated Output. 2

3 Functional Block Diagram 1() (2) 1.24V Reference V Thermal Shutdown 2(1) GND A(B) A: TO-220-, TO-26-(S), TO-252-2(1)/(2)/()/(4) B: TO-26-(SA) Figure. Functional Block Diagram of AZ9150 Ordering Information AZ Circuit Type Package T: TO-220- S: TO-26- SA: TO-26- DA: TO-252-2(1)/(2)/()/(4) E1: Lead Free G1: Green TR: Tape and Reel Blank: Tube.: Fixed Output.V 5.0: Fixed Output 5.0V 12: Fixed Output 12V

4 Ordering Information (Continued) Package TO-220- TO-26- (S) TO-26- (SA) Temperature Range -40 to 125 o C -40 to 125 o C -40 to 125 o C Part Number Marking ID Packing Type Lead Free Green Lead Free Green AZ9150T-.E1 AZ9150T-.G1 AZ9150T-.E1 AZ9150T-.G1 Tube AZ9150T-5.0E1 AZ9150T-5.0G1 AZ9150T-5.0E1 AZ9150T-5.0G1 Tube AZ9150T-12E1 AZ9150T-12E1 Tube AZ9150S-.E1 AZ9150S-.G1 AZ9150S-.E1 AZ9150S-.G1 Tube AZ9150S-.TRE1 AZ9150S-.TRG1 AZ9150S-.E1 AZ9150S-.G1 Tape & Reel AZ9150S-5.0E1 AZ9150S-5.0G1 AZ9150S-5.0E1 AZ9150S-5.0G1 Tube AZ9150S-5.0TRE1 AZ9150S-5.0TRG1 AZ9150S-5.0E1 AZ9150S-5.0G1 Tape & Reel AZ9150S-12E1 AZ9150S-12E1 Tube AZ9150S-12TRE1 AZ9150S-12E1 Tape & Reel AZ9150SA-.TRG1 AZ9150SA-.G1 Tape & Reel AZ9150SA-5.0TRG1 AZ9150SA-5.0G1 Tape & Reel AZ9150SA-12TRG1 AZ9150SA-12G1 Tape & Reel TO (1)/(2)/()/(4) -40 to 125 o C AZ9150DA-.TRG1 AZ9150DA-.G1 Tape & Reel AZ9150DA-5.0TRG1 AZ9150DA-5.0G1 Tape & Reel AZ9150DA-12TRG1 AZ9150DA-12G1 Tape & Reel BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant. Products with "G1" suffix are available in green packages. 4

5 Absolute Maximum Ratings (Note 1) Data Sheet Parameter Symbol Value Unit Supply Voltage 15 V Maximum Operating Junction Temperature T J 150 o C Storage Temperature Range T STG -65 to 150 o C Lead Temperature (Soldering, 10sec) T LEAD 00 o C ESD (Machine Model) 00 V Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. Recommended Operating Conditions Parameter Symbol Min Max Unit Supply Voltage 1.2 V Operating Junction Temperature T J o C 5

6 Electrical Characteristics AZ9150-.V Electrical Characteristics Operating Conditions: =4.V, I OUT =10mA, C IN= 10μF, C OUT =10μF, T J =25 o C, unless otherwise specified. The Boldface applies over -40 o C T J 125 o C. Parameter Symbol Condition Min Typ Max Unit Output Voltage I OUT =10mA.27.. V 10mA I OUT 1.5A, 4.V 8V.2..7 V Line Regulation V RLINE I OUT =10mA, 4.V 8V 2 17 mv Load Regulation V RLOAD =4.V, 10mA I OUT 1.5A 6.6 mv Output Voltage Temperature Coefficient Δ /ΔT I OUT =10mA 66 0 μv/ o C Dropout Voltage (Note 2) V DROP Δ =1% I OUT =100mA mv I OUT =750mA 260 mv I OUT =1.5A mv Ground Current I GND I OUT =750mA, =4.V 4 20 ma I OUT =1.5A, =4.V 17 ma Current Limit I LIMIT =0V (Note ) A Minimum Load Current I LOAD (MIN) 7 10 ma Output Noise Voltage (rms) 10Hz to 100KHz, I OUT =100mA, C OUT =10μF 400 μv Note 2: Dropout voltage is defined as the input-to-output differential when the output voltage drops to 99% of its norminal value which is measured at +1V applied to. Note : =(NOMINAL) +1V. 6

7 Electrical Characteristics (Continued) AZ V Electrical Characteristics Operating Conditions: =6V, I OUT =10mA, C IN= 10μF, C OUT =10μF, T J =25 o C, unless otherwise specified. The Boldface applies over -40 o C T J 125 o C. Parameter Symbol Condition Min Typ Max Unit Output Voltage I OUT =10mA V 10mA I OUT 1.5A, 6V 8V V Line Regulation V RLINE I OUT =10mA, 6V 8V 25 mv Load Regulation V RLOAD =6V, 10mA I OUT 1.5A mv Output Voltage Temperature Coefficient Δ /ΔT I OUT =10mA μv/ o C Dropout Voltage (Note 2) V DROP Δ =1% I OUT =100mA mv I OUT =750mA 260 mv I OUT =1.5A mv Ground Current I GND I OUT =750mA, =6V 4 20 ma I OUT =1.5A, =6V 17 ma Current Limit I LIMIT =0V (Note ) A Minimum Load Current I LOAD (MIN) 7 10 ma Output Noise Voltage (rms) 10Hz to 100KHz, I OUT =100mA, C OUT =10μF 400 μv Note 2: Dropout voltage is defined as the input-to-output differential when the output voltage drops to 99% of its norminal value which is measured at +1V applied to. Note : =(NOMINAL) +1V. 7

8 Electrical Characteristics (Continued) AZ V Electrical Characteristics Operating Conditions: =1V, I OUT =10mA, C IN= 10μF, C OUT =10μF, T J =25 o C, unless otherwise specified. The Boldface applies over -40 o C T J 125 o C. Parameter Symbol Condition Min Typ Max Unit Output Voltage I OUT =10mA V 10mA I OUT 1.5A, 1V 15V V Line Regulation V RLINE I OUT =10mA, 1V 15V 25 mv Load Regulation V RLOAD =1V, 10mA I OUT 1.5A mv Output Voltage Temperature Coefficient Δ /ΔT I OUT =10mA μv/ o C Dropout Voltage (Note 2) V DROP Δ =1% I OUT =100mA mv I OUT =750mA 260 mv I OUT =1.5A mv Ground Current I GND I OUT =750mA, =1V 4 20 ma I OUT =1.5A, =1V 17 ma Current Limit I LIMIT =0V (Note ) A Minimum Load Current I LOAD (MIN) 7 10 ma Output Noise Voltage (rms) 10Hz to 100KHz, I OUT =100mA, C OUT =10μF 400 μv Note 2: Dropout voltage is defined as the input-to-output differential when the output voltage drops to 99% of its norminal value which is measured at +1V applied to. Note : =(NOMINAL) +1V. 8

9 Typical Performance Characteristics Dropout Voltage (mv) =5.0V Dropout Voltage (mv) I OUT =1.5A =5.0V Output Current (ma) Temperature ( o C) Figure 4. Dropout Voltage vs. Output Current Figure 5. Dropout Voltage vs. Temperature Ground Current (ma) Output Current (ma) =6V =5.0V Ground Current (ma) =5.0V 1.5 I OUT =10mA 1.4 I 1. OUT =100mA Supply Voltage (V) Figure 6. Ground Current vs. Output Current Figure 7. Ground Current vs. Supply Voltage 9

10 Typical Performance Characteristics (Continued) Ground Current (ma) =5.0V I OUT =750mA I OUT =1000mA I OUT =1500mA Ground Current (ma) =6V =5.0V I OUT =10mA Supply Voltage (V) Temperature ( o C) Figure 8. Ground Current vs. Supply Voltage Figure 9. Ground Current vs. Temperature 8 20 Ground Current (ma) =6V =5.0V I OUT =750mA Ground Current (ma) =6V =5.0V I OUT =1.5A Temperature ( o C) Temperature ( o C) Figure 10. Ground Current vs. Temperature Figure 11. Ground Current vs. Temperature 10

11 Typical Performance Characteristics (Continued) 5.05 Output Voltage (V) =6V =5.0V I OUT =10mA Output Current Output Voltage C L =10μF =5.0V Temperature ( o C) Figure 12. Output Voltage vs. Temperature Figure 1. Load Transient C L =47μF I OUT =10mA Output Current Output Voltage =5.0V Input Voltage Output Voltage =5.0V Figure 14. Load Transient Figure 15. Line Transient 11

12 Typical Application + 10μF 1() (2) AZ9150 GND 2(1) + 10μF A(B) A: TO-220-, TO-26-(S), TO-252-2(1)/(2)/()/(4) B: TO-26-(SA) Figure 16. Typical Application of AZ

13 Mechanical Dimensions TO-220- Unit: mm(inch) 9.660(0.80) (0.420) φ.560(0.140) 4.060(0.160) 2.580(0.102).80(0.1) 0.550(0.022) 1.50(0.05) 1.850(0.07) 0.200(0.008) φ1.500(0.059) 8.520(0.5) 9.520(0.75) (1.098) 0.280(1.192) 14.20(0.560) (0.650) 7.560(0.140) 4.820(0.190) 2.080(0.082) 2.880(0.11) (0.046) 1.760(0.069) 0.81(0.015) (0.02) 8.76(0.45) (0.100) 0.81(0.015) 2.540(0.100) 0.56 (0.014) 0.610(0.024) 1

14 Mechanical Dimensions (Continued) TO-26- Unit: mm(inch) 4.070(0.160) 4.820(0.190) (0.40) 9.650(0.80) 2.540(0.100) 9.650(0.80) (0.405) 8.840(0.48) (0.581) (0.620) 1.150(0.045) 1.90(0.055) 0.510(0.020) 0.990(0.09) 2.540(0.100) 1.270(0.050) 1.90(0.055) 2.90(0.094) 2.690(0.106) (0.045) 1.90(0.055) (0.015) 0.020(0.001) 0.250(0.010) 2.640(0.104) 2.700(0.106) 0.60(0.014) 0.400(0.016) (0.087) (0.220) 7.420(0.292) 7.980(0.14) 2.540(0.100) 2.540(0.100) 14

15 Mechanical Dimensions (Continued) Data Sheet TO-252-2(1) Unit: mm(inch) 1.50(0.05) 1.650(0.065) 6.450(0.254) 6.650(0.262) 5.200(0.205) 5.400(0.21) 0.450(0.018) 0.580(0.02) 2.200(0.087) 2.400(0.094) 4.00(0.169) 5.400(0.21) 9.500(0.74) 9.900(0.90) 0.600(0.024) 0.900(0.05) 2.00TYP 4.500(0.177) 4.700(0.185) 0.000(0.000) 0.127(0.005) (0.028) 0.900(0.05) 0.500(0.020) 0.700(0.028) 1.400(0.055) 1.780(0.070) (0.018) 0.580(0.02) 5.450(0.215) 6.250(0.246) 2.550(0.100) 2.900(0.114).800REF(0.150REF) 4.800(0.189) 6.500(0.256) 15

16 Mechanical Dimensions (Continued) TO-252-2(2) Unit: mm(inch) 0.900(0.05) 1.250(0.049) 6.500(0.256) 6.700(0.264) 5.20(0.206) 5.40(0.214) 1.2± REF 0.470(0.019) 0.600(0.024) 6.000(0.26) 6.200(0.244) 1.80REF 0.600(0.024) 1.000(0.09) 1.150(0.045) 1.500(0.059) 9.800(0.86) 10.40(0.409) 7 2.9REF (0.05) 1.100(0.04) (0.055) 1.700(0.067) (0.087) 2.80(0.094) 5.250REF 0.770(0.00) 1.100(0.4) 2.28BSC 0.770(0.00) 0.890(0.05) 16

17 Mechanical Dimensions (Continued) TO-252-2() Unit: mm(inch) 0.900(0.05) 1.250(0.049) 6.500(0.256) 6.700(0.264) 5.10(0.202) 5.460(0.215) 1.29± REF 0.470(0.019) 0.600(0.024) 6.000(0.26) 6.200(0.244) 1.800REF 0.150(0.006) 0.750(0.00) 0.600(0.024) 1.000(0.09) 5.250REF 9.800(0.86) 10.40(0.409) (0.05) 1.100(0.04) 0.720(0.028) 0.900(0.05) 2.286(0.090) BSC (0.028) 0.850(0.0) 2.900REF 1.400(0.055) 1.700(0.067) (0.087) 2.80(0.094) 17

18 Mechanical Dimensions (Continued) TO-252-2(4) Unit: mm(inch) 6.50(0.250) 6.70(0.265) 4.960(0.195) 5.460(0.215) 0.890(0.05) 1.270(0.050) 2.180(0.086) 2.80(0.094) 0.460(0.018) 0.600(0.024) 4.20(0.170) MIN 2.160(0.085) MIN 1.20± (0.067) 1.900(0.075) 5.970(0.25) 6.220(0.245) (0.045) 1.492(0.059) 9.940(0.91) 10.40(0.407) 5.210(0.205) MIN 0.765(0.00) 1.124(0.044) 2.290(0.090) BSC 0.640(0.025) 0.884(0.05) 1.010(0.040) MAX DETAIL A 0.460(0.018) 0.610(0.024) 0.650(0.026) 0.780(0.01) PLATING 0.410(0.016) 0.560(0.022) BASE METAL 0.640(0.025) 0.884(0.05) SECTION B-B GAUGE PLANE B 1.500(0.059) 1.780(0.070) 0 10 B 2.740(0.108) REF 0.020(0.001) 0.120(0.005) SEATING PLANE 18

19 IMPORTANT NOTICE reserves the right to make changes without further notice to any products or specifications herein. does not assume any responsibility for use of any its products for any particular purpose, nor does assume any liability arising out of the application or use of any its products or circuits. does not convey any license under its patent rights or other rights nor the rights of others. MAIN SITE BCD - Headquarters Semiconductor Manufacturing Limited - Wafer BCD FabSemiconductor Manufacturing Limited BCD - Wafer Semiconductor Fab Manufacturing Limited Shanghai - IC Design SIM-BCD Group Semiconductor Manufacturing Co., Ltd. No. Shanghai 1600, Zi SIM-BCD Xing Road, Semiconductor Shanghai ZiZhu Manufacturing Science-based Limited Industrial Park, , China 800 Yi Advanced Shan Road, Analog Shanghai Circuits 2002, (Shanghai) China Corporation Tel: 800, , Yi Shan Road, Shanghai Fax: , China Tel: F, Zone B, 900, 1491, Yi Fax: Shan Road, Shanghai , China Tel: , Fax: Tel: , Fax: REGIONAL SALES OFFICE REGIONAL Shenzhen OfficeSALES OFFICE Shenzhen Shanghai SIM-BCD Office Semiconductor Manufacturing Co., Ltd., Shenzhen Office Shanghai Unit A Room SIM-BCD 120, Skyworth Semiconductor Bldg., Gaoxin Manufacturing Ave.1.S., Nanshan Co., Ltd. District, Shenzhen Shenzhen, Office Advanced China Analog Circuits (Shanghai) Corporation Shenzhen Office Taiwan Office BCD Taiwan Semiconductor Office (Taiwan) Company Limited 4F, 298-1, BCD Rui Semiconductor Guang Road, (Taiwan) Nei-Hu District, Company Taipei, Limited Taiwan 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, USA Office USA BCD Office Semiconductor Corp. BCD 0920 Semiconductor Huntwood Ave. Corporation Hayward, 0920 CA 94544, Huntwood USA Ave. Hayward, Room Tel: E, 5F, Noble 7951 Center, No.1006, rd Fuzhong Road, Futian District, Shenzhen , China Tel: Taiwan 2808 CA Tel : 94544, U.S.A Tel: Fax: Fax: Fax: Tel: Fax: Tel Fax: : Fax: