Reinforced with bar tacks at fly. Straps at hemline for adjustment

Transcription

1 Technical flat Page: 1 of 12 Elastic at the sides of waistband Darts at back Reinforced with bar tacks at fly Pocket left side with pleat at back Straps at hemline for adjustment Front with zipper at fly Description: Female loose fit trouser with elastic band inside waist at both sides. Button, button-hole and zipper at fly. Darts at back. Side pocket with pleat on right side. Strap at hemline with push buttons for adjustment of foot width. Decorative double stitching down sideseams backpart, at backseam + round pocket. Reinforced with bar tacks at fly and pocket. Further details in style description.

2 Style description Page: 2 of 12 Material and trim table Description Article no Composition Applied Consumption Fabric col. white 45/55% PES/COT 225 gr/m2 Main fabric all pattern parts Fabric col. navy 50/50% PES/CLY 220 gr/m2 A 4/1 Main fabric all pattern parts Thread 100 col. matching t/t 100% Polyester All decorative stitches + needle threads + bar tack Thread 120 col. matching t/t 100% Polyester All top + bottom looper threads Button 4-hole 27 Nylon 6.6 Waistband cf 1 pcs Metal sz 3 for industrial wash At fly front 1 pcs length acc to measurment At sides of waist band length acc. to measurement Stainless steel + plastic (core) Straps at hemline 2 pcs socket 6 pcs stud 100% Polyester Left side 15 cm from top 1 pcs pigment print Inside waistband centre back Zipper Elastic 35 mm (unbleach + black) Push-button 16 Carelabel According to general requirements Print According to general (size/identity) requirements 1 pcs Machine type requirements Machine type Stitch type Applied Steam Pressing - Intermediate pressing of all seams, finish press Three thread overlock st/2 cm All seams must be straight Safety lock st/2 cm All seams must be straight Lock stitch st/2 cm 7 st/2cm st/2 cm needle stitch Straight button hole Technical drawing - Assembling Decorative stitches Decorative stitches Waistband cf Bar tack st/1 cm Reinforcement according to style specifications Machine for push-buttons - Pressure according to required durability Z - Needle system: = Canu: 20:05 1 NM: 80 Size: 12 (134 (R), 135x5, SY 1955, DPx5) = Canu: 03:36 1 NM: 80 Size: 12 (B27, MY1023, UY 191 GS, DCx27)

3 Style description Page: 3 of 12 Material and trim table Patterns according to pattern overview Sizerange S - M - 6L length 72 cm S - M - 6L length 78 cm S - M - 6L length 84 cm General Seam allowance/tolerance Assembling: Hemline bottom: Assembling strap: Waist band: Button hole: Fly: 1 cm/ +/- 1 mm Folded 1 x 4 cm according to notch. Stitched 3.5 cm from bottom +/- 1 mm 1 cm/ +/- 0.5 mm (0.5 cm at the end) Single stitch 2 mm from edge/ +/- 0.5 mm according to style description: Details Straight button hole according to template. Button hole size according to button. According to enclosed template +/- 1 mm Side pocket: Folded 1 x 4 cm according to notch. Stitched 3.5 cm from top edge +/- 1 mm + Double stitch 2+7 mm from edge/ +/- 0.5 mm Single stitch 2 mm from edge/ +/- 0.5 mm Double stitch 2+7 mm from edge/ +/- 0.5 mm Must be placed according to style description 1 cm wide/ +/- 1 mm +/- 1 mm Decorative stitches: Bartacks: Seam assembling: Markings and pattern parts Grainline: Each pattern part must be placed on the fabric according to the visual grainline showing orientation and direction on the pattern part. Tolerance +/- 1 mm Drill: For placement of side pocket 0.5 x 0.5 cm from pocket edge For darts at back sew 2 cm beyond the drill marking Notch: For assembling of all cut seams. For hemline + side pocket + zipper at fly + elastic waist band + attachment of waist band. Templates For stitching of fly For placement of push buttons at strap hemline For placement of button and button hole at waist band Labelling 1 pcs care label: Print Size + identity print: Left side 15 cm from top (see General Requirements) Placement according to Printed size and identity instructions supplied by Region Midtjylland

4 Style description: Details Page: 4 of 12 Detail drawing Technical drawing Fly with zipper Sewing of fly Bartacks to reinforce zipper fly Zip guard behind zipper Reinforced with lock stitch at corner Folded at bottom Machine / stitch type: Seam allowance / tolerance: Follow general seam allowances and tolerances Detail drawing Technical drawing Side pocket back 20cm pocket hemline front pocket sides towards front + bottom 24 cm pocket side towards back Pocket must be reinforced with bartacks Machine / stitch type: Seam allowance / tolerance: Follow general seam allowances and tolerances

5 Style description: Details Page: 5 of 12 Detail drawing Technical drawing Sewing of straps Strap at hemline Strap 3 cm wide Sewing of cross at straps 12.5 cm sz 1:1 6 cm 11 cm Side view Machine / stitch type: 301 Seam allowance / tolerance: Follow general seam allowances and tolerances Detail drawing Technical drawing Elastic at sides of waist band front back Side view Machine / stitch type: 301 Seam allowance / tolerance: Follow general seam allowances and tolerances

6 Style description Page: 6 of 12 Description Side seam with double stitch machine Technical drawing Backseam with double stitch machine Inseam with safety machine 516 Waistband with single stitch at flat parts 301 Waistband with single stitch up against trouser at elasticated parts 301 Hemline - stitched with machine

7 F I A1 C Side view 10 cm 10 cm BACK BACK Page: 7 of cm 6 cm FRONT 7.5 cm Placement of Side pocket seam according to side 12.5 cm Green measures are fixed measurements in all sizes 24 cm 12.5 cm back Side view front FRONT front Strap at hemline 20cm Side pocket back A3 E CM D 6.5 CM H A2 Cut lenth of elastic band inside waistband Red mereasures are referring to measurement chart B G A Side seam Side seam No scale Measurement Chart 12 CM 15.0 CM

8 2S F Inside leg length G Crotch depth front. exclusive waistband H Crotch depth back. exclusive waistband S S S S S S M M M L L L L L L L L L L L L L L L L L L L L L Page: 8 of 12 Comments: The waistband at centre front must be parallel when closed Bar tacks must be placed in correct angle according to sketch 2S S F Inside leg length G Crotch depth front. exclusive waistband H Crotch depth back. exclusive waistband A A1 A2 A3 B C D E F G H I J ½ waist width - stretched ½ waistband centre front to elastic Waistband centre back to elastic Elastic cut length ½ Hip width measured 15 cm below waistband at side ½ Thigh width measured 6.5 cm below crotch level ½ Knee width measured 43.5 cm from hem ½ Hem width Inside leg length Crotch depth front. exclusive waistband Crotch depth back. exclusive waistband Zipper length Centre back to dart Measurement Chart

9 Pattern Overview Page: 9 of

10 Fabric requirements Page: 10 of 12 Product data Main Fabric Weave: Satin Quality: 30cvcx16cvc Fiber: 45% Polyester 55% Cotton Squaremeter weight: 225 g/m2 Colour: White Tolerances Pilling martindale DS/EN ISO :2000 End note at scale, 5 best value Pilling: 4-5 Abrasion resistance Tearing strength DS/EN ISO :1999 Stress: : 9kPa (Meas: 2 threads are broken) note: rubs DS/EN ISO :2000 Mean in Newton Warp thread 45 Newton Weft thread 45 Newton Product data Main Fabric Weave: A 4/1 Fiber: 50% Polyester 50% Lyocell Thread count: Warp 50 Weft 34 (50/50% pes/cly) Construction Warp 54 Weft 33 (50/50% pes/cly) Squaremeter weight: 220 g/m2 Colours: White: Optical white Navy: TC Country blue: TC Hypoclorite resistance on colours tested according to ISO 105 N01:93 Physical performance: Dimensional Stability: warp max +/-3.0% weft max +/-3.5% Braking strength: warp 70 dan weft 50 dan Pilling: note 3.5 Crease Recovery: grade 3 Special Remarks: Öko Tex Standard Class 2 Bluesign approved fabric Care Labelling: Qualification Label: ISO (ISO 15797) -3N Tolerances (+/- 5% <230 g/m2)

11 Trimming requirements Page: 11 of 12 Product data Others Article no: Composition: Slider: Zamac & Brass combination, plated Tape: Polyester Elements: Brass (oxidized) Size: Size 3. Metal zipper with auto-lock slider. Closed-end Colour: Tape colour matching fabric colour Photo: Product data Others Article no: Composition: Nylon 6.6 Size: 27 Colour: Colour matching fabric colour Photo: Product data Others Article no: Composition: Shell in Stainless steel + plastic core Size: 16 Supplier: Photo:

12 Trimming requirements Page: 12 of 12 Product data Others Article no: Composition: 14% Polyester (warp) 33% Polyester (weft) 53% Natural rubber (non covered) Size: Width: 35 mm Colour: 03 White + stretch 150% Black Photo: Øko-Tex